ZH
RU
ES

real vibration tester

real vibration tester, Total:219 items.

In the international standard classification, real vibration tester involves: Environmental testing, Vibration and shock with respect to human beings, Vibrations, shock and vibration measurements, Protection of and in buildings, Noise with respect to human beings, Construction equipment, Construction materials, Mechanical testing, Acoustics and acoustic measurements, Transformers. Reactors, Electronic components in general, Electromagnetic compatibility (EMC), Fuels, Fluid storage devices, Electrical accessories, Occupational safety. Industrial hygiene, Rubber, Optical equipment, Paper products, Power transmission and distribution networks, Agricultural machines, implements and equipment, Industrial automation systems, Languages used in information technology, Testing of metals, Floor treatment appliances, Elements of buildings, Air quality, Linear and angular measurements, Components for electrical equipment, Lubricants, industrial oils and related products, Internal combustion engines for road vehicles, Diagnostic, maintenance and test equipment, Photography.

GOSTR, real vibration tester

GOST R 53963.2-2010 Vibration. Measurement of vibrations in buildings. Measuring instrumentation tests

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, real vibration tester

GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 23716-2009 Human response to vibration.Measuring instrumentation
GB/T 13824-2015 Mechanical vibration requirements of rotating and reciprocating machines for vibration severity measuring instruments
GB/T 13823.8-1994 Methods for the calibration of vibration and shock pick-ups Testing of transverse vibration sensitivity
GB/T 20485.31-2011 Methods for the calibration of vibration and shock transducers.Part 31:Testing of transverse vibration sensitivity
GB/T 13823.20-2008 Methods for the calibration of vibration and shock pick-ups-Accelerometer resonance testing-General methods
GB/T 13823.4-1992 Methods for the calibration of vibration and shock pick-ups.Testing of magnetic field sensitivity
GB/T 13823.17-1996 Methods for the calibration of vibration and shock pick-ups. Testing of acoustic sensitivity
GB/T 11349.2-2006 Vibration and shock.Experimental determination of mechanical mobility.Part 2: Measurements using single-point translation excitation with an attached vibration exciter
GB/T 13823.9-1994 Methods for the calibration of vibration and shock pick-ups. Testing of transverse shock sensitivity
GB/T 13823.16-1995 Methods for calibration of vibration and shock pick-ups. Testing of temperature response by comparison
GB/T 13823.5-1992 Methods for the calibration of vibration and shock pick-ups.Testing of mounting torque sensitivity
GB/T 13823.6-1992 Methods for the calibration of vibration and shock pick-ups. Testing of base strain sensitivity
GB/T 13823.12-1995 Methods for calibration of vibration and shock pick-ups. Resonance frequency testing of undamped accelerometers on a steel block
GB/T 13823.15-1995 Methods for calibration of vibration and shock pick-ups. Testing of transient temperature sensitivity

PL-PKN, real vibration tester

PN N01355-1991 Vibrations. Measuring instrumentation for measuring human response to vibrations. Requirements and tests
PN N01356-1991 Vibrations. Piezoelectric accelerometers for measurement of human response to mechanica vibrations. Requirements and tests
PN S95021-1991 Measuring instruments for motor vehicles. Tachometers. Requirements and tests
PN S95020-1992 Measuring instruments for motor vehicles and motorizet bicycles. Speedometers and hodometers. Requirements and tests

RU-GOST R, real vibration tester

GOST ISO 8041-2006 Vibration. Human response to vibration. Measuring instrumentation
GOST R 53963.1-2010 Mechanical vibration. Measurement of vibrations in buildings. Requirements for measuring instrumentation
GOST ISO 2954-1997 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
GOST 25275-1982 Standards system on vibration. Devices for measuring the vibration of rotary machines. General technical requirements
GOST R IEC 60068-3-8-2015 Environmental dynamic testing for machines, instrument and other articles. Selecting amongst vibration tests
GOST R 51499-1999 Environmental dynamic testing for machines, instruments and other articles. Vibration. Time-history method
GOST 30630.1.8-2002 Test methods for resistance to environmental factors of machines, instruments and other articles. Time-history vibration tests
GOST 29179-1991 Electromagnetic compatibility of technical means. HUF equipment. Methods of measurements for side oscillations
GOST 31419-2010 Environmental dynamic test methods for machines, instruments and other technical articles. Mixed mode vibration tests
GOST IEC 60068-2-57-2016 Environmental dynamic testing for machines, instrument and other articles. Vibration. Time-history and sine-beat method
GOST 30630.1.9-2002 Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control)
GOST R 51502-1999 Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control)
GOST 31367-2008 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Aircraft ground support equipment
GOST ISO 2954-2014 Mechanical vibration. Condition monitoring of machinery using measurements made on non-rotating parts. Requirements for instruments
GOST R ISO 7626-2-2016 Mechanical vibration and shock. Experimental determination of mechanical mobility. Part 2. Measurements using single-point translation excitation with an attached vibration exciter
GOST 30630.1.2-1999 Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of vibration
GOST 30630.1.9-2015 Mechanic environment stability test methods for machines, instruments and other industrial products. Features of digital control of random vibration testing
GOST R IEC 773-1996 Brushes for electrical machines. Test methods and apparatus for the measurement of the operational characteristics
GOST 31418-2010 Environmental dynamic test methods for machines, instrument and other technical articles. Shock tests with shock response spectrum synthesis

Professional Standard - Aviation, real vibration tester

HB 6137-1987 Calibration specification for flight test instrumentation Vibration acceleration

British Standards Institution (BSI), real vibration tester

BS EN ISO 8041-1:2017 Tracked Changes. Human response to vibration. Measuring instrumentation. General purpose vibration meters
BS EN ISO 8041-2:2021 Human response to vibration. Measuring instrumentation - Personal vibration exposure meters
BS ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
BS 4675-2:1978 Mechanical vibration in rotating machinery - Requirements for instruments for measuring vibration severity
20/30393452 DC BS EN ISO 8041-2. Human response to vibration. Measuring instrumentation. Part 2. Personal vibration exposure meters
15/30294739 DC BS EN ISO 8041 AMD1. Human response to vibration. Measuring instrumentation
BS ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers - Testing of transverse vibration sensitivity
BS EN 60255-21-1:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoidal)
BS EN 60255-21-1:1989 Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Vibration tests (sinusoidal)
BS 6955-22:1997 Calibration of vibration and shock pick-ups. Accelerometer resonance testing. General methods
BS EN ISO 22867:2021 Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS IEC 61671-2:2016 Standard for automatic test markup language (ATML) instrument description
BS ISO 7626-2:2015 Mechanical vibration and shock. Experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter
BS 6955-15:1994 Calibration of vibration and shock pick-ups. Method of test for acoustic sensitivity
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
20/30376305 DC BS EN ISO 22867. Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS 6955-16:1994 Calibration of vibration and shock pick-ups. Method of test for mounting torque sensitivity
BS 6955-13:1994 Calibration of vibration and shock pick-ups. Method of test for base strain sensitivity
BS 6955-17:1994 Calibration of vibration and shock pick-ups. Method of test for fixed temperature sensitivity
BS 6955-18:1994 Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity
BS ISO 16063-32:2016 Methods for the calibration of vibration and shock transducers. Resonance testing. Testing the frequency and the phase response of accelerometers by means of shock excitation
BS EN 60255-21-2:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock and bump tests
BS ISO 16063-34:2019 Methods for the calibration of vibration and shock transducers - Testing of sensitivity at fixed temperatures
BS ISO 16063-33:2017 Methods for the calibration of vibration and shock transducers. Testing of magnetic field sensitivity
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)

Danish Standards Foundation, real vibration tester

DS/EN ISO 8041/AC:2008 Human response to vibration - Measuring instrumentation
DS/EN ISO 8041:2005 Human response to vibration - Measuring instrumentation
DS/EN ISO 8041-2:2021 Human response to vibration – Measuring instrumentation – Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
DS/ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
DS/ISO 8041-2:2021 Human response to vibration – Measuring instrumentation – Part 2: Personal vibration exposure meters
DS/ISO 16063-41:2013 Methods for the calibration of vibration and shock transducers - Part 41: Calibration of laser vibrometers
DS/EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
DS/EN 60255-21-1:1996 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 1: Vibration tests (sinusoidal)

KR-KS, real vibration tester

KS B ISO 8041-2013 Human response to vibration－Measuring instrumentation
KS B ISO 8041-1-2019 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters
KS B ISO 2954-2019 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
KS B ISO 16063-31-2019 Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity
KS C IEC 61897-2019 Overhead lines — Requirements and tests for Stockbridge type aeolian vibration dampers
KS B ISO 5347-14-2014 Methods for the calibration of vibration and shock pick-ups — Part 14: Resonance frequency testing of undamped accelerometers on a steel block
KS B ISO 16063-32-2018 Methods for the calibration of vibration and shock transducers — Part 32:Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation

Group Standards of the People's Republic of China, real vibration tester

T/CSMT YB001-2022 Micro-vibration test specification for precision instrument use environment
T/CEC 481-2021 Technical specification for vibration characteristic tester of transformer on-load tap-changer

German Institute for Standardization, real vibration tester

DIN 45669-1:2020 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN EN ISO 8041-1:2017-10 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017); German version EN ISO 8041-1:2017
DIN 45669-3:2006 Measurement of vibration immission - Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ
DIN ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
DIN ISO 2954:2012-10 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
DIN EN ISO 8041-1:2017 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
DIN EN 1032:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value (includes Amendment A1:2008); English version of DIN EN 1032:2009-02
DIN EN ISO 8041-2:2022-02 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021); German version EN ISO 8041-2:2021
DIN EN ISO 8041-2:2020 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO/DIS 8041-2:2020); German and English version prEN ISO 8041-2:2020
DIN EN 60255-21-1:1996-05 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 1: Vibration tests (sinusoidal) (IEC 60255-21-1:1988); German version EN 60255-21-1:1995
DIN EN ISO 22867:2022-03 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021); German version EN ISO 22867:2021
DIN EN ISO 22867:2020 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO/DIS 22867:2020); German and English version prEN ISO 22867:2020
DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 51834-2:2010 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils
DIN 51834-2:2017 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils
DIN 51834-2:2004 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils

Korean Agency for Technology and Standards (KATS), real vibration tester

KS B ISO 2954:2014 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
KS B ISO 8041-1:2019 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters
KS B ISO 2954:2019 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
KS F 8106-1996(2011) Vibration and shock testing methods for construction machinery gauges
KS F 8106-1986 Vibration and shock testing methods for construction machinery gauges
KS F 2428-1990 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
KS B ISO TR 7849:2007 Acoustics－Estimation of airborne noise emitted by machinery using vibration measurement
KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS M 6687-2016 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS M 6687-1986 Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS B ISO 9022-19:2002 Optics and optical instruments-Environmental test methods-Part 19:Temperature cycles combined with sinusoidal or random vibration
KS B ISO 16063-31:2019 Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity
KS B 0713-11-2001 Methods for the calibration of vibration and shock pick-ups-Part 11:Testing of transverse vibration sensitivity
KS B ISO 7626-2:2014 Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS C IEC 61897:2019 Overhead lines — Requirements and tests for Stockbridge type aeolian vibration dampers
KS M 6687-2016(2021) Test method for rubber compound-vulcanizing characteristics using oscillating disk cure meter
KS C IEC 60255-21-1:2002 Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section One：Vibration test(sinusoidal)
KS C IEC 60255-21-1-2002(2017) Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section One：Vibration test(sinusoidal)
KS C IEC 60255-21-1-2002(2022) Electrical relays－Part 21：Vibration, shock, bump and seismic tests on measuring relays and protection equipment－Section One：Vibration test(sinusoidal)
KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
KS B ISO 5347-22_2001:2016 Methods for the calibration of vibration and shock pick-ups－Part 22：Accelerometer resonance testing－General methods
KS B ISO 9022-19-2002(2022) Optics and optical instruments－Environmental test methods－Part 19：Temperature cycles combined with sinusoidal or random vibration
KS B ISO 9022-19-2002(2017) Optics and optical instruments－Environmental test methods－Part 19：Temperature cycles combined with sinusoidal or random vibration
KS B ISO 5347-15:2014 Methods for the calibration of vibration and shock pick-ups — Part 15: Testing of acoustic sensitivity
KS B ISO 5347-19:2014 Methods for the calibration of vibration and shock pick-ups — Part 19: Testing of magnetic field sensitivity
KS B 0713-15-2001 Methods for the calibration of vibration and shock pick-ups-Part 15:Testing of acoustic sensitivity
KS B ISO 9022-10:2002 Optics and optical instruments-Environmental test methods-Part 10:Combined sinusoidal vibration and dry heat or cold
KS B ISO 16063-32:2018 Methods for the calibration of vibration and shock transducers — Part 32:Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation
KS B 0713-19-2001 Methods for the calibration of vibration and shock pick-ups-Part 19:Testing of magnetic field sensitivity

American National Standards Institute （ANSI), real vibration tester

ANSI S3.13-1987 Mechanical Coupler for Measurement of Bone Vibrators
ANSI PH3.68-1978 Test Instruments for Movie- and Still-Picture Cameras with Automatic Exposure Controls

Association Francaise de Normalisation, real vibration tester

NF E90-100:1985 Mechanical vibration and shock. Vibrations of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity.
NF E90-403-1*NF EN ISO 8041-1:2017 Human response to vibration - Measuring instrumentation - Part 1 : general purpose vibration meters
NF E90-100*NF ISO 2954:2016 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
NF E90-403-2*NF EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2 : personal vibration exposure meters
NF EN ISO 8041-2:2021 Réponse des individus aux vibrations - Appareillage de mesure - Partie 2 : instruments de mesure de l'exposition des personnes aux vibrations
NF E90-453:1997 Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emisson value. General.
NF ISO 10055:2014 Vibrations mécaniques - Exigences requises pour les essais de vibrations des équipements de bord et des composants des machines
NF U25-515*NF EN ISO 22867:2021 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
NF EN 60255-21-1:1998 Relais électriques - Partie 21 : essais de vibrations, de chocs, de secousses et de tenue aux séismes applicables aux relais de mesure et aux dispositifs de protection. Section 1 : essais de vibrations (sinusoïdales).
NF C45-204-1*NF EN 60255-21-1:1998 Electrical relays. Part 21 : vibration, shock, bump and seismic tests on measuring relays and protection equipment. Section 1 : vibration tests (sinusoidal).
E90-350-14:1994 Methods for the calibration of vibration and shock pick-ups. Part 14 : resonance frequency testing of undamped accelerometers on a steel block.
E90-350-15:1994 Methods for the calibration of vibration and shock pick-ups. Part 15 : testing of acoustic sensitivity.
NF EN ISO 13355:2016 Emballages - Emballages d'expédition complets et pleins et charges unitaires - Essais de vibration verticale aléatoire
NF E90-350-15:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 15 : essai de sensibilité acoustique.
NF E90-350-16:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 16 : essai de sensibilité de couple de serrage.

ES-UNE, real vibration tester

UNE-EN ISO 8041-1:2018 Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
UNE-EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021) (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN ISO 22867:2022 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)

VN-TCVN, real vibration tester

TCVN 6372-1998 Mechamcal vibration of rotating and reciprocating machinery.Requirements for instruments for measuring vibration severity

TR-TSE, real vibration tester

TS 2779-1977 Mechanical Vibration Of Eotafing ind Reciprocating Machinery Requirements For Instruments For Measuring Vibration Severity

International Organization for Standardization (ISO), real vibration tester

ISO 2954:1975 Mechanical vibration of rotating and reciprocating machinery; Requirements for instruments for measuring vibration severity
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters
ISO 5347-11:1993 Methods for the calibration of vibration and shock pick-ups; part 11: testing of transverse vibration sensitivity
ISO 7626-2:1990 Vibration and shock; experimental determination of mechanical mobility; part 2: measurements using single-point translation excitation with an attached vibration exciter
ISO 16063-31:2009/WD Amd 1 Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity — Amendment 1
ISO 7626-2:2015 Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 2: Measurements using single-point translation excitation with an attached vibration exciter
ISO 5347-19:1993 Methods for the calibration of vibration and shock pick-ups; part 19: testing of magnetic field sensitivity
ISO 16063-33:2017 Methods for the calibration of vibration and shock transducers - Part 33: Testing of magnetic field sensitivity
ISO 5347-15:1993 Methods for the calibration of vibration and shock pick-ups; part 15: testing of acoustic sensitivity

CZ-CSN, real vibration tester

CSN ISO 2954:1994 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
CSN 01 5082-1976 Material resistante determination against cavitation erosion by ultrasonic vibratory apparatus
CSN 35 6858-1976 Instruments with piezoelectric pick-ups for service vibratlon measurement. Metrologic testing
CSN 36 1413-1974 Testing methods of functional parametcrs of electric vacuum cleancrs

European Committee for Standardization (CEN), real vibration tester

DD ENV 28041-1993 Human Response to Vibration - Measuring Instrumentation (ISO 8041 : 1990)
EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)

Lithuanian Standards Office , real vibration tester

LST EN ISO 8041:2005 Human response to vibration - Measuring instrumentation (ISO 8041:2005)
LST EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
LST EN ISO 8041:2005/AC:2008 Human response to vibration - Measuring instrumentation (ISO 8041:2005/Cor 1:2007)
LST EN 60255-21-1-2001 Electrical relays. Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Section 1: Vibration tests (sinusoidal) (IEC 60255-21-1:1988)
LST EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)

AENOR, real vibration tester

UNE-EN ISO 8041:2006 Human response to vibration - Measuring instrumentation (ISO 8041:2005)
UNE-EN 60255-21-1:1996 ELECTRICAL RELAYS. PART 21: VIBRATION, SHOCK, BUMP AND SEISMIC TESTS ON MEASURING RELAYS AND PROTECTION EQUIPMENT. SECTION 1: VIBRATION TESTS (SINUSOIDAL).
UNE 82501:2004 Measuring instruments. Instruments intended to measure the emissions of exhaust pollutant gaz of motor vehicles. Characteristics and test methods.
UNE-EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)

IT-UNI, real vibration tester

UNI EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters

Japanese Industrial Standards Committee (JISC), real vibration tester

JIS A 8101:1998 Vibration and shock testing methods for construction machinery gauges

CH-SNV, real vibration tester

SN EN ISO 8041-2:2021 Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)

American Society for Testing and Materials (ASTM), real vibration tester

ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
ASTM F558-11 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM D7528-09 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D7528-13 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

Electronic Components, Assemblies and Materials Association, real vibration tester

EIA_ECA-364-28E-2006 TP-28E Vibration Test Procedure for Electrical Connectors and Sockets
ECA EIA-364-28F-2011 TP-28F Vibration Test Procedure for Electrical Connectors and Sockets

ECIA - Electronic Components Industry Association, real vibration tester

EIA-364-28D-1999 TP-28D Vibration Test Procedure for Electrical Connectors and Sockets
EIA-364-28F-2011 (R2017) TP-28F Vibration Test Procedure for Electrical Connectors and Sockets
364-28C-1997 TP-28C Vibration Test Procedure for Electrical Connectors and Sockets
EIA-364-28F-2011 TP-28F Vibration Test Procedure for Electrical Connectors and Sockets
EIA/ECA-364-28E-2006 TP-28E Vibration Test Procedure for Electrical Connectors and Sockets

Professional Standard - Aerospace, real vibration tester

QJ 1288-1987 Calibration and test methods for vibration and shock sensors

Military Standard of the People's Republic of China-General Armament Department, real vibration tester

GJB 3236-1998 Calibration and Testing Methods for Vibration and Shock Sensors

ZA-SANS, real vibration tester

SANS 16063-31:2009 Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity

未注明发布机构, real vibration tester

BS EN 60255-21-1:1996(1999) Electrical relays — Part 21 : Vibration, shock, bump and seismic tests on measuring relays and protection equipment — Section 1 : Vibration tests (sinusoidal)
BS 7935-2:2004(2010) Constant amplitude force calibration — Part 2 : Calibration of the calibration device instrumentation to be used for the dynamic calibration of non - resonant uniaxial dynamic testing systems — Method

ES-AENOR, real vibration tester

Institute of Electrical and Electronics Engineers (IEEE), real vibration tester

IEEE Std 1431-2004 IEEE Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros
IEEE STD 1671.2-2008 IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML: Exchanging Instrument Descriptions
IEEE P1671.2/D15, September 2012 IEEE Approved Draft Standard for Automatic Test Markup Language (ATML) Instrument Description

YU-JUS, real vibration tester

JUS N.M6.065-1985 Hand-heldmotor-operatedelectric tods. Internal vibrators. Supplementary reguirements and tests

International Electrotechnical Commission (IEC), real vibration tester

IEC 61671-2:2016*IEEE Std 1671.2 Standard for automatic test markup language (ATML) instrument description
IEC 61671-2:2016 Standard for automatic test markup language (ATML) instrument description

US-FCR, real vibration tester

FCR COE CRD-C 521-81-1981 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR FREQUENCY AND AMPLITUDE OF VIBRATORS FOR CONCRETE

AT-ON, real vibration tester

ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing

European Committee for Electrotechnical Standardization（CENELEC）, real vibration tester

EN 60255-21-1:1995 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 1: Vibration Tests (Sinusoidal)

Standard Association of Australia （SAA）, real vibration tester

AS 1289.3.7.1:2002(R2013)

IN-BIS, real vibration tester

IS 13818-1993 Harvesting equipment. Tractor operated potato digger shakers. Test code

国家市场监督管理总局、中国国家标准化管理委员会, real vibration tester

GB/T 20485.32-2021 Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation

Society of Automotive Engineers (SAE), real vibration tester

SAE J1598-2009 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading
SAE J1598-1999 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability under Vibration-Induced Loading
SAE J1598-2021 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading

SAE - SAE International, real vibration tester

SAE J1598-2016 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading
SAE J1598-1988 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading@ Recommended Practice