ZH
RU
ES

laboratory heating method

laboratory heating method, Total:499 items.

In the international standard classification, laboratory heating method involves: Analytical chemistry, Soil quality. Pedology, Civil engineering in general, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Wood, sawlogs and sawn timber, Aerospace engines and propulsion systems, Glass, Plastics, Buildings, Protection against fire, Pharmaceutics, Electrical and electronic testing, Corrosion of metals, Domestic, commercial and industrial heating appliances, Products of the chemical industry, Graphic technology, Veterinary medicine, Graphical symbols, Medical sciences and health care facilities in general, Rubber, Farming and forestry, Quality, Paper and board, Road engineering, Waxes, bituminous materials and other petroleum products, Elements of buildings, Protection of and in buildings, Internal combustion engines, Refractories, Aircraft and space vehicles in general, Hydraulic energy engineering, Coals, Sterilization and disinfection, Road vehicle systems, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Equipment for petroleum and natural gas industries, Environmental testing, Environmental protection, Heat recovery. Thermal insulation, Solar energy engineering, Installations in buildings, Microbiology, Lubricants, industrial oils and related products, Paints and varnishes, Acoustics and acoustic measurements, Education, Organic chemicals, Extraction and processing of petroleum and natural gas, Industrial furnaces, Electricity. Magnetism. Electrical and magnetic measurements, Home economics in general, Tyres, General methods of tests and analysis for food products, Products of the textile industry, Earth-moving machinery, Reinforced plastics, Ergonomics, Measurement of volume, mass, density, viscosity, Wood technology processes, Textile fibres, Ventilators. Fans. Air-conditioners, Agricultural machines, implements and equipment, Continuous handling equipment, Test conditions and procedures in general, Kitchen equipment, Insulating fluids, Insulating materials, Heat treatment, Fuels, Thermodynamics and temperature measurements, Non-ferrous metals, Protective equipment, Adhesives, Road vehicles in general, Crude petroleum, Raw materials for rubber and plastics.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, laboratory heating method

GB 6579-1986 Laboratory glassware－Methods for thermal shock test
GB/T 6579-1986 Laboratory glassware--Methods for thermal shock test
GB/T 19687-2005 Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
GB/T 15727-1995 Methods for thermal shock test of laboratory apparatus glass(stick method)
GB/T 6579-2007 Laborator glassware.Thermal shock and thermal shock endurance test methods
GB 4793.6-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials
GB/T 31299-2014 Household electric thermal storage room heaters.Methods for measuring performance
GB/T 4757-2001 Methods for the batch flotation testing of fine coal
GB/T 6682-1992 Water for analytical laboratory use--Specification and test methods
GB/T 4757-2013 Methods for the batch flotation testing of fine coal
GB/T 38502-2020 Test method for bactericidal effect of disinfectant in laboratory
GB/T 6682-2008 Water for analytical laboratory use.Specification and test methods
GB/T 13942.1-1992 Method for laboratory test of natural decay resistance of woods
GB/T 18974-2003 Indoor test methods for the thermal performance of solar collector
GB/T 21747-2008 Educational laboratory equipment.Safety requirements and test methods for laboratory workbenches
GB 4793.6-2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 6: Particular requirements for laboratory material heating equipment
GB/T 7287-2008 Test method of infrared heater
GB/T 18260-2015 Method of laboratory test for toxicity of wood preservatives against termites
GB/T 18260-2000 Laboratory test method for wood preservatives of determining the protective effectiveness of preservatives against termits
GB/T 32720-2016 Laboratory methods for determination of microbial soil respiration
GB/T 31014-2014 Acoustics.Laboratory methods of underwater target strength measurement
GB/T 7287.12-1987 Test method for vibration of infrared heater

YU-JUS, laboratory heating method

JUS B.E8.095-1987 Laboratory glassware. Methods for thermal shock test
JUS U.J5.060-1983 Testing methods of heat transfer troughout of bilding constructtons in laboratory

TR-TSE, laboratory heating method

TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE
TS 1069-1972 METHODS OF LABORATORY TESTS FOR MEAT PRODUCTS

International Organization for Standardization (ISO), laboratory heating method

ISO 718:1982 Laboratory glassware — Methods for thermal shock tests
ISO 718:1990 Laboratory glassware; thermal shock and thermal shock endurance; test methods
ISO/TS 19022:2016 Plastics - Method of controlled acceleration of laboratory weathering by increased irradiance
ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
ISO 1775:1975 Porcelain laboratory apparatus; Requirements and methods of test
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO/IEC GUIDE 43:1984 Development and operation of laboratory proficiency testing
ISO 4892:1981 Plastics; Methods of exposure to laboratory light sources
ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heat method
ISO/CD 11781:2004 Foodstuffs — General guidelines for single-laboratory validation of qualitative real-time PCR methods
ISO/TS 21488:2020 Plastics — Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation
ISO 10263-3:1994 Earth-moving machinery - Operator enclosure environment - Part 3: Operator enclosure pressurization test method
ISO 11613:1999 Protective clothing for firefighters - Laboratory test methods and performance requirements
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods

British Standards Institution (BSI), laboratory heating method

BS 3517:1991 Methods for thermal shock tests on laboratory glassware
PD ISO/TS 19022:2016 Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS PD ISO/TS 19022:2016 Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
BS 7755-5.5:1999 Soil quality - Physical methods - Laboratory methods
BS EN 13240:2001+A2:2004(2008) Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001 Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001+A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
BS EN 60531:2000+A11:2019 Household electric thermal storage room heaters. Methods for measuring performance
BS EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of Materials
BS EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material
BS EN 12697-35:2004 Bituminous mixtures - Test methods for hot mix asphalt -Part 35: Laboratory mixing
BS EN ISO 3696:1987 Water for analytical laboratory use - Specification and test methods
BS EN ISO/IEC 15423:2010 Water for analytical laboratory use - Specification and test methods
BS EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS ISO 21901:2021 Thermal insulation. Test method for thermal diffusivity. Periodic heat method
BS 7530-1:1992 Methods for froth flotation testing of hard coal - Laboratory procedure
BS 4309:1968 Methods of measuring the performance of laboratory electric resistance furnaces
BS PD CEN/TS 17329-1:2021 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
BS ISO 10263-4:2009 Earth-moving machinery - Operator enclosure environment - Heating, ventilating and air conditioning (HVAC) test method and performance
BS EN 12802:2011 Road marking materials. Laboratory methods for identification
BS ISO 11274:1999 Soil quality. Determination of the water-retention characteristic. Laboratory methods
BS EN ISO 4892-2:2013 Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps
BS ISO 11274:1998 Soil quality. Determination of the water retention characteristic. Laboratory methods
BS 2782-1 Method 140D:1997 Methods of testing plastics. Thermal properties. Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
BS 2646-5:1993 Autoclaves for sterilization in laboratories. Methods of test for function and performance
BS EN 12697-32:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
13/30288546 DC BS EN 12697-32. Bituminous mixtures. Test methods for hot mix asphalt. Part 32. Laboratory compaction of bituminous mixtures by vibratory compactor
BS EN 60068-2-78:2002 Environmental testing - Test methods - Test Cab - Damp heat, steady state
BS DD CEN/TS 15443:2006 Solid recovered fuels — Methods for laboratory sample preparation
BS DD CEN/TS 15443:2007 Solid recovered fuels. Methods for laboratory sample preparation
22/30455532 DC BS EN 17886. Laboratory test method. assessment of the susceptibility of thermal insulation products to mould growth
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
PAS 67-2008 Laboratory tests to determine the heating and electrical performance of heat-led micro-cogeneration packages primarily intended for heating dwellings

Japanese Industrial Standards Committee (JISC), laboratory heating method

JIS A 1211:2009 Test methods for the California Bearing Ratio (CBR) of soils in laboratory
JIS A 1490:2022 Thermal insulation -- Test method for thermal diffusivity -- Periodic heat method
JIS A 1416:1994 Method for laboratory measurement of sound transmission loss
JIS A 1138:2005 Method of making test sample of concrete in laboratory
JIS A 1138:2018 Method of making test sample of concrete in laboratory
JIS R 2613:1985 Testing method for reheat shrinkage of insulating fire bricks
JIS L 0879:1996 Test methods for colour fastness to dry heating

Association Francaise de Normalisation, laboratory heating method

NF B30-109*NF ISO 718:1986 Laboratory glassware. Methods for thermal shock tests.
NF ISO 718:1986 Verre - Verrerie de laboratoire. Méthodes d'essai de choc thermique.
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF X15-205:1986 Laboratory equipment. Furnitures. Test methods.
NF B35-801:1972 Laboratory glassware. Porcelain laboratory apparatus. Quality and methods of test.
NF Q60-501:1975 Méthode générale pour la réalisation en laboratoire d'une impression en vue d'évaluations ultérieures
NF X15-204:1986 Laboratory equipment. Benches. Test methods.
NF P98-818-35:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 35 : laboratory mixing.
NF P98-818-35/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 35 : laboratory mixing.
NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF P50-752*NF EN 12114:2000 Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method
NF EN 12802:2012 Produits de marquage routier - Méthodes de laboratoire pour identification
NF C42-020-2-010*NF EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF R12-755:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods.
NF P75-487*NF ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heat method
NF C42-720:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of material.
NF C42-020-2-010*NF EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF P98-604*NF EN 12802:2012 Road marking materials - Laboratory methods for identification.
NF ISO 12828-2:2020 Méthode de validation des analyses de gaz d'incendie - Partie 2 : validation intralaboratoire des méthodes de quantification
NF EN IEC 61010-2-010:2020 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-010 : exigences particulières pour appareils de laboratoire utilisés pour l'échauffement des matières
NF ISO 1431-3:2017 Caoutchouc vulcanisé ou thermoplastique - Résistance au craquelage par l'ozone - Partie 3 : méthode de référence et autres méthodes pour la détermination de la concentration d'ozone dans les enceintes d'essai de laboratoire
NF P98-818-32/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF P98-818-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF T90-210:2018 Water quality - Protocol for the intial method performance assesment in a laboratory
NF EN 12114:2000 Performance thermique des bâtiments - Perméabilité à l'air des composants et parois de bâtiments - Méthode d'essai en laboratoire
NF ISO 10191:2021 Pneumatiques pour voitures particulières - Vérification de l'aptitude des pneumatiques - Méthodes d'essai en laboratoire
XP CEN/TS 17455:2020 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Critères de performance des méthodes d'analyse des mycotoxines validées dans un seul laboratoire ou suite à un essai interlaboratoires
NF P50-749-5*NF EN 1946-5:2000 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5 : measurements by pipe test methods
NF P98-818-35*NF EN 12697-35:2017 Bituminous mixtures - Test methods - Part 35 : Laboratory mixing
NF R12-755*NF ISO 10191:2021 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
NF B40-332:1998 Methods of test for dense shaped refractory products. Part 10 : determination of permanent change in dimensions on heating.

Korean Agency for Technology and Standards (KATS), laboratory heating method

KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M 7036-1995 Laboratory processing of pulp(Beater method)
KS F 2312-2022 Test method for soil compaction in laboratory
KS F 2312-1986 Test method for soil compaction in laboratory
KS M ISO 11561:2009 Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS D 0299-2019 Laboratory method for the preparation of rust grades
KS L 3122-2006(2021) Testing method for reheating on carbon brick
KS C IEC 60531-2002(2017) Methods for measuring the performance of electric thermal storage water-heaters for household and similar purposes
KS F 2494-2017 Standard test method of the laboratory permeability test for
KS F 2494-2017(2022) Standard test method of the laboratory permeability test for
KS M ISO 3696:2010 Water for analytical laboratory use-Specification and test methods
KS M ISO 3696-2010(2020) Water for analytical laboratory use－Specification and test methods
KS R 1103-2006 Test methods of hot water heaters for automobiles
KS D 0299-2009 Laboratory method for the preparation of rust grades
KS F 2425-2017 Method of making test sample of concrete in laboratory
KS F 2425-1981 Method of making test sample of concrete in laboratory
KS M ISO 10191-2012(2017) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS C IEC 61010-2-10:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-10:Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-10:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-10: Particular requirements for laboratory equipment for the heating of materials
KS D 0235-2015 Laboratory test method of sacrificial anodes for cathodic protection
KS F 2425-2002 Method of making test sample of concrete in laboratory
KS M ISO 10191-2012(2022) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS C IEC 61010-2-010:2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS B 6846-1999 Test code of vacuum heat treatment furnace
KS M 5978-1994 Testing method for loss by heating of powder coating materials
KS F 2476-2007 Test method for polymer-modified mortar
KS D 0235-2015(2020) Laboratory test method of sacrificial anodes for cathodic protection
KS D 0294-2009 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test
KS K ISO 11613:2019 Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting — Laboratory test methods and performance
KS M 2258-2007 Testing method for effect of heat on thin-film of asphaltic materials
KS M 2258-1982 Testing method for effect of heat on thin-film of asphaltic materials

American Society for Testing and Materials (ASTM), laboratory heating method

ASTM D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM E1522-93(2003) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM C1519-10 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D2017-05 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
ASTM D2017-81(1994)e1 Standard Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
ASTM D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
ASTM D1883-07 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM F2875-10 Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods
ASTM D3345-17 Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
ASTM C793-23 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM D2168-02 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D2168-02a Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM E1522-93(2008) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM C793-91(1997)e1 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
ASTM C793-05(2017) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM D2168-90(1996)e1 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D7847-12 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM D216-77(1982) Standard test method for calibration of laboratory mechanical earth compactors
ASTM D969-85(2003)e1 Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D969-85(1998) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D96-73(1984) Laboratory test method for degree of bleeding of road marking paint
ASTM D96-88(1998) Laboratory test method for degree of bleeding of road marking paint
ASTM E596-96(2002) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM C1363-05 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D2168-10 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM C481-99 Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2005) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM D4697-95 Standard Guide for Maintaining Test Methods in the User's Laboratory
ASTM C481-99(2011) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2016) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C1519-02 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-02a Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-10(2022) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM E542-01(2012) Standard Practice for Calibration of Laboratory Volumetric Apparatus
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D584-96(2005) Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
ASTM D584-96 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
ASTM E596-96(2016) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
ASTM B78-90(1995)e1 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM B78-90(2001) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM E2817-11(2018) Standard Test Method for Test Fueling Masonry Heaters
ASTM E2817-11 Standard Test Method for Test Fueling Masonry Heaters
ASTM D4697-95(2001) Standard Guide for Maintaining Test Methods in the User's Laboratory
ASTM D1183-96e1 Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D1749-93(1997) Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
ASTM E2653-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E2653-23 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Test Method with Fewer Than Six Participating Laboratories
ASTM D4007-81(1995)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02(2006) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-08 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016)e1 Standard test method for determination of water and sediment in crude oil by centrifugation (laboratory method)
ASTM E1601-19 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM D4575-09(2019) Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D1509-95(2000) Standard Test Methods for Carbon Black-Heating Loss
ASTM D1509-95(2012) Standard Test Methods for Carbon Blackmdash;Heating Loss
ASTM D150-22 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
ASTM D1509-15 Standard Test Methods for Carbon Black&x2014;Heating Loss

American National Standards Institute （ANSI), laboratory heating method

ANSI/ASTM D2017:1996 Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
ANSI/AMAC 500-L-2007 Laboratory Methods of Testing Louvers for Rating
ANSI/AMCA 500-L-2012 Laboratory Methods of Testing Louvers for Rating
ANSI/AMCA 520-2009 Laboratory Methods of Testing Actuators
ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating
ANSI/ASTM F2022:2001 Test Method for Performance of Booster Heater
ANSI/ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ANSI/AMCA 230-2012 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification
ANSI/ASTM F2142:2001 Test Method for Performance of Drawer Warmers
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/ASHRAE 58-1986 Method of Testing for Rating Room Air Conditioner and Packaged Terminal Air Conditioner Heating Capacity
ANSI/ASTM B78:2001 Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/ASTM F2644:2007 Test Method for the Performance of Commercial Patio Heaters
ANSI/ASTM F2141:2007 Test Method for Performance of Hot Deli Cases
ANSI/ASHRAE 146-2011 Methods of Testing and Rating Pool Heaters

未注明发布机构, laboratory heating method

BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)
BS 2648:1955(2011) Performance requirements for Electrically - heated laboratory drying ovens
BS 4309:1968(2011) Methods of Measuring the performance of laboratory electric resistance furnaces
BS 7258-4:1994(1998) Laboratory fume cupboards — Part 4 : Method for determination of the containment value of a laboratory fume cupboard
BS EN ISO 3696:1995(1999) Water for analytical laboratory use — Specification and test methods

German Institute for Standardization, laboratory heating method

DIN 12880:2007-05 Electrical laboratory devices - Heating ovens and incubators
DIN EN 13240:2005 Roomheaters fired by solid fuel - Requirements and test methods; German version EN 13240:2001 + A2:2004
DIN 12876-2:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 2: Determination of ratings of heating and refrigerated circulators
DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN EN 12114:2000 Thermal performances of buildings - Air permeability of building components and building elements - Laboratory test method; German version EN 12114:2000
DIN 12876-2:2001-12 Electrical laboratory devices - Laboratory circulators and baths - Part 2: Determination of ratings of heating and refrigerated circulators
DIN 12851:1974 Laboratory porcelain; requirements, methods of test
DIN EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods; English version of DIN EN 14727:2006-03
DIN EN 12697-35:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing; German version EN 12697-35:2004+A1:2007
DIN V 55394-1:2000 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997)
DIN EN 17886:2022-08 Laboratory test method - Assessment of the susceptibility of thermal insulation products to mould growth; German and English version prEN 17886:2022 / Note: Date of issue 2022-07-08
DIN EN 13150:2001 Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001
DIN EN 12802:2011-12 Road marking materials - Laboratory methods for identification; German version EN 12802:2011 / Note: To be replaced by DIN EN 12802 (2018-12).
DIN ISO 718:1993-02 Laboratory glassware; thermal shock and thermal shock endurance; test methods; identical with ISO 718:1990
DIN EN 61010-2-010:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:2003); German version EN 61010-2-010:2003
DIN EN 12697-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor (includes Amendment A1:2007); English version of DIN EN 12697-32:2007-11
DIN EN ISO 340:2007 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2004); English version of DIN EN ISO 340:2007-06
DIN EN 12697-35:2016-10 Bituminous mixtures - Test methods - Part 35: Laboratory mixing; German version EN 12697-35:2016
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN 12924-2:2007 Laboratory furniture - Fume cupboards - Part 2: Fume cupboards for increased acidic and heat load

VN-TCVN, laboratory heating method

TCVN 7155-2002 Laboratory glassware.Thermal shock and thermal shock endurance.Test methods
TCVN 4851-1989 Water for analytical laboratory use.Specifications and test methods
TCVN 4201-2012 Soils.Laboratory methods for determination of compaction characteristics
TCVN 4202-2012 Soils.Laboratory methods for determination of unit weight
TCVN 4195-2012 Soils.Laboratory methods for determination of density
TCVN 4200-2012 Soils.Laboratory methods for determination of compressibility
TCVN 6651-2000 Soil quality.Determination of the water-retention characteristic.Laboratory methods
TCVN 7532-2005 Passenger car tyres.Verifying tyre capabilities.Laboratory test methods
TCVN 4197-2012 Soils.Laboratory methods for determination of plastic limit and liquid limit

CZ-CSN, laboratory heating method

CSN ISO 718:1993 Laboratory glassware - Thermal shock and thermal shock endurance - Test methods
CSN ISO 1775:1994 Porcelain laboratory apparatus. Requirements and methods of test
CSN 72 1010-1989 Determination of earth volume mass. Laboratory and field methods
CSN 03 8145-1992 Corrosion protection. Non-metallic polymere materials. Methods of laboratory and accelerated tests of corrosivity
CSN 657991-2003 Oil products - Heating oils - Requirements and test methods

Indonesia Standards, laboratory heating method

SNI 1744-2012 Metode uji CBR laboratorium
SNI 3419-2008
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 07-6217-2000 Testing methods of metal laboratory corrosion
SNI 2815-2011 Cara uji tekan triaksial pada batu di laboratorium
SNI 03-6430.1-2000 Test methods for compressive strength of grouts for preplaced-aggregate concrete in the laboratory
SNI 2486-2011 Cara uji kuat tarik tidak langsung batu di laboratorium
SNI 03-3400-1994 Test method for friction strenght of wood in laboratories.
SNI 03-3959-1995 Test method for bending strength of wood in laboratories
SNI 03-3960-1995 Test method for modulus of bending elasticity of wood in laboratories
SNI 03-6842-2002 Test method of wood hardness in the laboratory

European Committee for Standardization (CEN), laboratory heating method

EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN 12114:2000 Thermal performances of buildings - Air permeability of building components and building elements - Laboratory test method
EN 12802:2000 Road Marking Materials - Laboratory Methods for Identification
EN 12802:2011 Road marking materials - Laboratory methods for identification
EN 13150:2001 Workbenches for laboratories - Dimensions, safety requirements and test methods
EN ISO 3696:1995 Water for Analytical Laboratory Use- Specification and Test Methods (ISO 3696 : 1987)
EN 12697-35:2016 Bituminous mixtures - Test methods - Part 35: Laboratory mixing

RO-ASRO, laboratory heating method

STAS SR ISO 718:1995 Laboratory glassware - Thermal shock and thermal shock endurance - Test methods
STAS 8759-1986 PLASTICS Methods of exposure to laboratory light sources
STAS 1850-1962

Military Standard of the People's Republic of China-General Armament Department, laboratory heating method

GJB 150.15A-2009 Laboratory environmental test methods for military materiel.Part 15:Acceleration test
GJB 150.9A-2009 Laboratory environmental test methods for military materiel.Part 9:Damp heat test
GJB 9399-2018 General methods for military laboratory verification
GJB 772.203-1989 Explosives test method 75℃ heating test
GJB 772.204-1989 Explosives test methods 100°C heating test
GJB 737.7-1993 Test method for pyrotechnics agent 75℃ heating test

Standard Association of Australia （SAA）, laboratory heating method

AS/NZS 1301.209:2017 Methods of test for pulp and paper, Method 209: Laboratory processing of pulp — PFI mill method
AS/NZS 1301.209s:2003 Methods of test for pulp and paper (metric units) - Laboratory processing of pulp - PFI mill method
AS/NZS 4445.1:1997 Solar heating - Domestic water heating systems - Performance rating procedure using indoor test methods

Danish Standards Foundation, laboratory heating method

DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DS/EN 13240/A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
DS/EN 13240:2003 Roomheaters fired by solid fuel - Requirements and test methods
DS/ISO 21901:2021 Thermal insulation – Test method for thermal diffusivity – Periodic heat method
DS/ISO 4892:1985 Plastics. Methods of exposure to laboratory light sources
DS/EN 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
DS/EN 12697-35+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing
DS/EN 12802:2012 Road marking materials - Laboratory methods for identification
DS/EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods
DS 1126.7:1985 Joints in building. Laboratory method of test for air permeability of joints
DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons

Lithuanian Standards Office , laboratory heating method

LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
LST EN 13240-2002 Roomheaters fired by solid fuel - Requirements and test methods
LST EN 13240-2002/A2-2004 Roomheaters fired by solid fuel - Requirements and test methods
LST EN 13240-2002/AC-2006 Roomheaters fired by solid fuel - Requirements and test methods
LST EN 13240-2002/A2-2004/AC-2007 Roomheaters fired by solid fuel - Requirements and test methods
LST EN 12697-35+A1-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing
LST EN 12802-2011 Road marking materials - Laboratory methods for identification
LST EN 61010-2-010-2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014)
LST EN 61010-2-010-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010: Particular requirements for laboratory equipment for the heating of material (IEC 61010-2-010:2003)

AENOR, laboratory heating method

UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
UNE 400321:1998 LABORATORY GLASSWARE. THERMAL SHOCK AND THERMAL SHOCK ENDURANCE. TEST methods.
UNE-EN 60531:2002 Household electric thermal storage room heaters - Methods for measuring performance.
UNE 57017:1994 PULPS. LABORATORY BEATING. VALLEY BEATER METHOD.
UNE 83502:2004 Concrete with fibers. Method of making in the laboratory.
UNE-EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
UNE-EN 12802:2012 Road marking materials - Laboratory methods for identification
UNE-EN 60675/A1:1999 HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS. METHODS FOR MEASURING PERFORMANCE
UNE-EN 60675:1997 HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS. METHODS FOR MEASURING PERFORMANCE.
UNE 103502:1995 TEST LABORATORY METHOD FOR DETERMINING IN A SOIL THE C.B.R. INDEX.
UNE-EN 12697-35:2017 Bituminous mixtures - Test methods - Part 35: Laboratory mixing

IX-SA, laboratory heating method

AS 1012.19:1988

Professional Standard - Aviation, laboratory heating method

HB 5247-1993 Test method for hot air accelerated aging of room temperature vulcanizing sealants
HB 6745-1993 Test method for thermal cracking of room temperature vulcanizing sealants

ES-UNE, laboratory heating method

UNE-EN 60531:2002/A11:2020 Household electric thermal storage room heaters - Methods for measuring performance
UNE-EN 60683:2012 Industrial electroheating equipment - Test methods for submerged-arc furnaces (Endorsed by AENOR in March of 2012.)

Underwriters Laboratories (UL), laboratory heating method

UL 61010A-2-010 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials
UL 61010A-2-010-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials (First Edition)
UL 61010A-2-010 (ND)-2002 National Differences For UL 61010A-2-010 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials (First Edition)

Professional Standard - Navy, laboratory heating method

HJB 319-2005 Seagrass-1 fuze laboratory test method
HJB 320-2005 Pomegranate-5 fuze laboratory test method

RU-GOST R, laboratory heating method

GOST 26263-1984 Soils. Laboratory method for determining thermal conductivity of frozen soils
GOST R 55457-2013 Horses. Methods for laboratory helminthosis diagnostics
GOST R 59597-2021 Soils. Laboratory method for triaxial test of frozen soils
GOST 26075-2013 Animals. Methods of Laboratory Diagnostic of Rabies
GOST 8.292-1984 State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST 28622-2012 Soils. Laboratory method for determination of frost-heave degree
GOST R 59596-2021 Soils. Method of laboratory determination of normal forces of frost heaving
GOST IEC 61010-2-010-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST R 56353-2015 Soils. Laboratory methods for determination of soil dynamic properties
GOST 5180-2015 Soils. Laboratory methods for determination of physical characteristics
GOST 22733-2016 Soils. Laboratory method for determining of maximum density
GOST 23161-1978 Soils. Laboratory method for determination of subsiding characteristics
GOST 23161-2012 Soils. Method of laboratory determination of subsiding characteristics
GOST IEC 61010-2-010-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST 29225-1991 Porcelain laboratory apparatus. Requirements and methods of test
GOST 27209.2-1990 Electrical thermal equipment. Direct arc furnaces. Test methods
GOST R 54083-2010 General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for temperature resistance test
GOST 25051.2-1982 The state system of testing products. Test chambers of heat and cold. Certification methods
GOST 27711-1988 Dipping varnishes. Method for accelerated determination of thermal endurance
GOST 28097-1989 Varnished cloth. Methods for accelerated determination of thermal endurance
GOST 23740-2016 Soils. Methods of laboratory determination of organic composition
GOST 25584-2016 Soils. Laboratory methods for determination of coefficient of hydraulic conductivity
GOST 34259-2017 Soils. Method of laboratory determination of adhesion (stickiness)
GOST 23740-1979 Soils. Methods of laboratory determination of organic composition
GOST R 54228-2010 Solid recovered fuels. Methods for laboratory sample preparation
GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST 27483-1987 Fire hazard testing. Test methods. Glow-wire test and guidance
GOST R 54254-2010 Carbon materials. Test method for thermal conductivity at room temperature
GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison

HU-MSZT, laboratory heating method

NO-SN, laboratory heating method

NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8013-1982 Geotechnical testing - Laboratory methods - Water content
NS 8001-1982 Geotechnical testing - Laboratory methods - Percussion liquid limit
NS 8002-1982 Geotechnical testing - Laboratory methods - Fall cone liquid limit
NS 8004-1982 Geotechnical testing - Laboratory methods - Shrinkage limit
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, laboratory heating method

GB/T 33710-2017 Mobile laboratory—Method for classification and gradation
GB/T 2291-2016 Method for preparation of coal tar pitch specimens
GB/T 3685-2017 Conveyor belts—Laboratory scale flammability characteristics—Test method

Jilin Provincial Standard of the People's Republic of China, laboratory heating method

DB22/T 281-2019 Fungal Laboratory Disinfection and Sterilization Methods

Professional Standard - Agriculture, laboratory heating method

NY/T 541-2002 Sampling methods for laboratory investigation of animal diseases
GB 6682-1992 Analytical laboratory water specifications and test methods
第3．1章OIE陆生动物诊断试验和疫苗手册-第七版 General guidelines - Laboratory methods for bacterial susceptibility testing

Henan Provincial Standard of the People's Republic of China, laboratory heating method

DB4106/T 3-2019 Sampling method for animal epidemic laboratory inspection

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., laboratory heating method

ASHRAE LO-09-076-2009 The Role of Plants in the Reduction of Heat Flux through Green Roofs: Laboratory Experiments
ASHRAE 110-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110 INT 1-2011 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units

IT-UNI, laboratory heating method

Professional Standard - Machinery, laboratory heating method

JB/T 8127.3-1995 Test mathod for fuel fired heaters
JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-2023 Testing method for dust resistivity in laboratory
JB/T 11557-2013 Hot chamber, horizontal cold chamber die-casting machine reliability test method
JB/T 7901-1999 Metals materials - Uniform corrosion - Methods of laboratory immersion testing

Group Standards of the People's Republic of China, laboratory heating method

T/SZUAVIA 009.6-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 6: Damp heat test
T/CSAE 104-2019 Xenon arc lamp aging test method for automotive exterior coating laboratory

BE-NBN, laboratory heating method

NBN T 01-211-1988 Water for analytical laboratory use - Specification and test methods

Professional Standard - Water Conservancy, laboratory heating method

SL 128-1995 Test method for laboratory concrete mixer

ZA-SANS, laboratory heating method

SANS 3696:1987 Water for analytical laboratory use - Specification and test methods
SANS 61010-2-010:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials
SANS 340:2006 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons

VE-FONDONORMA, laboratory heating method

NORVEN 76-58-1966

AT-ON, laboratory heating method

ONORM S 4250-1991 Tennis rackets - Concepts, laboratory measurement methods
ONORM S 4022-1977 Alpine ski; elastic properties; laboratory measurement methods
ONORM S 4071-1981 Cross country skis; elastic properties; laboratory measurement methods
ONORM S 4077-1984 Cross country skis; dynamic Performance; laboratory measurement methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), laboratory heating method

ASHRAE 41.2-2018 Standard Methods for Laboratory Airflow Measurement
ASHRAE 110 ERTA-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 127-2007 Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners P/C: 02/2009
ASHRAE 110-1995 Method of Testing Performance of Laboratory Fume Hoods

国家市场监督管理总局、中国国家标准化管理委员会, laboratory heating method

GB/T 40024-2021 Laboratory instruments and equipment—Taxonomy
GB/T 36167-2018 Method for coal preparation laboratory timed-release flotation analysis

Society of Motion Picture and Television Engineers (SMPTE), laboratory heating method

SMPTE 56-1996 Motion-Picture Film - Nomenclature for Studios and Processing Laboratories
SMPTE ST 56-2005 Motion-Picture Film - Nomenclature for Studios and Processing Laboratories

Professional Standard - Hygiene , laboratory heating method

WS/T 415-2013 Assessment of laboratory tests when proficiency testing is not available

(U.S.) Ford Automotive Standards, laboratory heating method

FORD FLTM INDEX VOL 2-2006 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 2 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 3-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 3 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 4-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 4 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 5-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 5 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 6-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 6 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 7-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 7 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 8-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 8 PHYSICAL TEST METHODS

Professional Standard - Coal, laboratory heating method

MT/T 144-1997 Methods for the coal flotation test by progressive release in coal separation lab

IN-BIS, laboratory heating method

Shanxi Provincial Standard of the People's Republic of China, laboratory heating method

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography
DB14/T 2797-2023 Specifications for confirmation of chemical analysis methods in testing laboratories

CH-SNV, laboratory heating method

VSM 10363-1977

Professional Standard - Petroleum, laboratory heating method

SY/T 6712-2008 Laboratory measurement method of complex resistivity of core sample
SY 6712-2008 Laboratory measurement method of complex resistivity of annual rock sample
SY/T 7035-2016 Method of thermal simulation in gold tubes for hydrocarbon generation of source rocks
SY 7035-2016 Thermal Simulation Experiment Method of Gold Tube Hydrocarbon Generation

海关总署, laboratory heating method

SN/T 5479-2022 African swine fever laboratory rapid detection method

European Committee for Electrotechnical Standardization（CENELEC）, laboratory heating method

EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
EN 50350:2004 Charging control systems for household electric room heating of the storage type Methods for measuring performance

CENELEC - European Committee for Electrotechnical Standardization, laboratory heating method

EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement@ control@ and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of material

Professional Standard - Light Industry, laboratory heating method

QB/T 4873-2015 Test methods of artificial leather and synthetic leather.Exposure to laboratory light sources

International Electrotechnical Commission (IEC), laboratory heating method

IEC 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials

TH-TISI, laboratory heating method

TIS 2002-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-010: particular requirements for laboratory equipment for the heating of materials

KR-KS, laboratory heating method

KS C IEC 61010-2-010-2018(2023) Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS B ISO 5696-2016 Trailed agricultural vehicles－Brakes and braking devices－Laboratory test method
KS C IEC 61010-2-010-2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS K ISO 11613-2019 Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting — Laboratory test methods and performance

PL-PKN, laboratory heating method

PN B13003-1986 Laboratory glassware General specifications and methods of tests
PN BN 7469-01-1968 Printing inks System of laboratory testing methods

Professional Standard - Commodity Inspection, laboratory heating method

SN/T 2660-2010 Preservation methods for culture collection in foodstuff microbiology laboratory
SN/T 3955.4-2014 Breeding method of important vectors at frontier ports.Part 4:Breeding method of Musca domestica (Muscina Stabulans)
SN/T 3955.6-2014 Breeding method of important vectors at frontier ports.Part 6:Breeding method of Xenopsylla cheopis (Pulex irritans, Citellophilus tesquorum)
SN/T 3955.1-2014 Breeding method of important vectors at frontier ports.Part 1:Breeding method of Anopheles sinensis (An.anthropophagus)
SN/T 3955.2-2014 Breeding method of important vectors at frontier ports.Part 2:Breeding method of Aedes albopictus (Aedes aegypti)

CEN - European Committee for Standardization, laboratory heating method

PREN 12802-2018 Road marking materials - Laboratory methods for identification
EN 12697-32:2019 Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor
PD CEN/TS 15443:2006 Solid recovered fuels - Methods for laboratory sample preparation

GOSTR, laboratory heating method

GOST R 58327-2018 Soils. Laboratory method for determining parameters of relaxation
GOST R 58326-2018 Soils. Laboratory method for determining the overconsolidation characteristics
GOST 34467-2018 Soils. Laboratory methods for determination of calcium carbonate content
GOST 34276-2017 Soils. Methods of laboratory determination of the specific resistance to penetration

Professional Standard - Civil Aviation, laboratory heating method

MH/T 1051-2012 Wind Tunnel Laboratory Measurement of Spray Drift

Professional Standard - Military and Civilian Products, laboratory heating method

WJ 38-2005 Test method of nitrocellulose.Stability.Heat test method

Sichuan Provincial Standard of the People's Republic of China, laboratory heating method

DB51/T 1710.2-2013 Giant Panda Quarantine Technology—Technical Specifications for Laboratory Detection of Canine Distemper Virus—Real-time Fluorescent RT-PCR Method

Anhui Provincial Standard of the People's Republic of China, laboratory heating method

DB34/T 2987-2017 Experimental method for thermal physical properties of thermal insulation materials (constant temperature plane heat source method)

Professional Standard - Forestry, laboratory heating method

LY/T 1283-1998 Method of laboratory test for toxicity of wood preservatives to decay fungi
LY/T 1284-1998 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1283-02011 Laboratory test method for toxicity of wood preservatives to decaying fungi
LY/T1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus

The American Road & Transportation Builders Association, laboratory heating method

AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

AASHTO - American Association of State Highway and Transportation Officials, laboratory heating method

T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

Professional Standard - Energy, laboratory heating method

NB/SH/T 6001-2020 Guidelines for interlaboratory studies to determine the precision of test methods

国家质量监督检验检疫总局, laboratory heating method

SN/T 3955.3-2014 Laboratory breeding methods of important medical vector organisms at border ports Part 3: Laboratory breeding methods of Culex pipiens (Culex quinquefasciatus)

NZ-SNZ, laboratory heating method

NZS 4407.3.1:1991 Methods of testing road aggregates - Laboratory tests - Test 3.1 The water content of aggregate

Professional Standard - Building Materials, laboratory heating method

JC/T 275-1980 Test method of heat conductivity coefficient of aerated concrete