ZH
RU
ES

plastic sample box

plastic sample box, Total:493 items.

In the international standard classification, plastic sample box involves: Plastics, Wastes, Bottles. Pots. Jars, Cases. Boxes. Crates, Electrical accessories, Rubber and plastics products, Miscellaneous domestic and commercial equipment, Kitchen equipment, Packaging and distribution of goods in general, Materials for aerospace construction, Optical equipment, Rubber, Surface treatment and coating, Paints and varnishes, Medical equipment, Road engineering, Fertilizers, Particle size analysis. Sieving, Aircraft and space vehicles in general, Fuels, Conducting materials, Graphical symbols, Protection against fire, Chipless working equipment, Equipment for the rubber and plastics industries, Raw materials for rubber and plastics, Water quality, Construction materials, Refractories, Analytical chemistry.

Group Standards of the People's Republic of China, plastic sample box

T/JZXS 002-2018 Plastic trays and boxes for food
T/LAPRA 106-2023 Plastic carton for liquor
T/QGCML 688-2023 plastic stationery box
T/SDAQI 077-2023 Disposable plastic tray（box）for food packaging
T/ZZB 2656-2022 Portable plastic containers for food
T/ZZB 1283-2019 Environmental friendly plastic crisper
T/CASME 533-2023 High temperature resistant plastic wafer box
T/XJSL 0002-2018 Disposable plastic yogurt cup(bottles;boxes;cans)
T/CAS 265-2017 Rotomolding product—Plastics inspection chamber

Danish Standards Foundation, plastic sample box

DS/CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
DS/CEN/TS 16010:2020 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
DS/EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
DS/EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens
DS/EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
DS/EN ISO 2818:1997 Plastics - Preparation of test specimens by machining
DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates

Association Francaise de Normalisation, plastic sample box

XP T50-810*XP CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
XP CEN/TS 16011:2013 Plastiques - Plastiques recyclés - Préparation des échantillons
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
NF EN ISO 10210:2017 Plastiques - Méthodes de préparation des échantillons pour les essais de biodégradation des matériaux plastiques
NF EN ISO 2818:2019 Plastiques - Préparation des éprouvettes par usinage
NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
NF T58-006:2014 Plastics - Test specimens
NF T58-006*NF EN ISO 20753:2018 Plastics - Test specimens
NF T58-001:1997 Plastics. Preparation of test specimens by machining.
NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF T58-003:1994 Plastics. Compression moulding test specimens of thermoplastic materials.
NF EN ISO 1110:2019 Plastiques - Polyamides - Conditionnement accéléré d'éprouvettes
NF T30-708:1983 Paints. Thick plastics coatings. Preparation of test pieces. Application of products.
NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
NF T51-122:1988 Plastics. Determination of tensile properties by use of small specimens.
NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
NF T51-294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens.
NF EN ISO 15252-2:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF EN ISO 14526-2:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
XP CEN/TS 16010:2013 Plastiques - Plastiques recyclés - Procédures d'échantillonnage pour l'essai des déchets de plastiques et des recyclats
NF EN ISO 10724-1:2002 Plastiques - Moulage par injection d'éprouvettes en compositions de poudre à mouler (PMC) thermodurcissables - Partie 1 : principes généraux et moulage d'éprouvettes à usages multiples
XP T50-809*XP CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
NF T51-078:1993 Plastics. Determination of the combustibility of specimens using a 125 mm flame source.
NF T50-004-2/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T58-004:2004 Plastics - Multipurpose test specimens.
NF T58-004*NF EN ISO 3167:2014 Plastics - Multipurpose test specimens
NF T58-004:1997 Plastics. Multipurpose-test specimens.
NF T51-294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2 : small tensile bars.
NF EN ISO 14529-2:2000 Plastiques - Poudres à mouler à base de mélamine/phénol (MP-PMC) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF EN ISO 20558-2:2019 Plastiques - Matériaux pour moulage et extrusion en poly(phénylène sulfide) (PPS) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
NF T50-060:2000 Plastics - Generic identification and marking of plastics products.
NF EN 13421:2006 Plastiques - Compositions de moulage thermodurs - Composites et fibres de renfort - Préparation des éprouvettes pour déterminer l'anisotropie des propriétés des composites de moulage par compression
NF U42-400-2*NF EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2 : sample preparation
NF T58-001*NF EN ISO 2818:2019 Plastics - Preparation of test specimens by machining
NF T58-009*NF EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens
NF T51-294-3:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates.
NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
NF T50-060:1994 PLASTIC. GENERIC IDENTIFICATION AND MARKING OF PLASTIC PRODUCTS.
NF EN ISO 24023-2:2020 Plastiques - Matériaux à base de poly(chlorure de vinyle) plastifié (PVC-P) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T51-076/A1*NF EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1 : specimens
NF EN ISO 22088-3:2006 Plastiques - Détermination de la fissuration sous contrainte dans un environnement donné (ESC) - Partie 3 : méthode de l'éprouvette courbée

European Committee for Standardization (CEN), plastic sample box

PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
PD CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
EN ISO 20753:2014 Plastics - Test specimens
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
prEN ISO 20753 Plastics - Test specimens (ISO/DIS 20753:2022)
PD CEN/TS 16010:2020 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials ISO 295:2004
EN ISO 2818:2019 Plastics - Preparation of test specimens by machining (ISO 2818:2018)
EN ISO 3167:1996 Plastics - Multipurpose-Test Specimens ISO 3167: 1993
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
EN 14780:2011 Solid biofuels - Sample preparation
EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
EN ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)

AENOR, plastic sample box

UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
UNE-EN ISO 20753:2015 Plastics - Test specimens (ISO 20753:2008)
UNE-CEN/TS 16010:2015 EX Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE-EN ISO 1110:1998 PLASTICS. POLYAMIDES. ACCELERATED CONDITIONING OF TEST SPECIMENS. (ISO 1110:1995).
UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
UNE-EN ISO 294-2:1999 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 2: SMALL TENSILE BARS (ISO 294-2:1996)
UNE-EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
UNE-EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)

German Institute for Standardization, plastic sample box

DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN 16906:2007 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 16906:2015 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN 16906:1989 Testing of plastic sheeting and films; sample and specimen preparation and conditioning
DIN CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN 10457:1988-02 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
DIN 53598-1:1983 Statistical evaluation at off-hand samples with examples from testing of rubbers and plastics
DIN EN ISO 20753:2022-07 Plastics - Test specimens (ISO/DIS 20753:2022); German and English version prEN ISO 20753:2022 / Note: Date of issue 2022-06-17*Intended as replacement for DIN EN ISO 20753 (2019-02).
DIN EN ISO 20753:2019-02 Plastics - Test specimens (ISO 20753:2018); German version EN ISO 20753:2018 / Note: To be replaced by DIN EN ISO 20753 (2022-07).
DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
DIN EN ISO 3167:2003 Plastics - Multipurpose test specimens (ISO 3167:2002); German version EN ISO 3167:2003
DIN EN ISO 20753:2019 Plastics - Test specimens (ISO 20753:2018)
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN EN ISO 10724-1:2002-04 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001
DIN 53442:1990-09 Flexural fatique testing of plastics using flat specimens
DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN CEN/TS 16010:2021-04 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN 10457:1988 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN EN ISO 15252-2:2000-08 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999
DIN EN ISO 14526-2:2000-08 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
DIN EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011); German version EN ISO 294-5:2013
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
DIN EN ISO 24025-2:2020-08 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020); German version EN ISO 24025-2:2020
DIN EN 1482-2:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation; German version EN 1482-2:2007 / Note: To be replaced by DIN EN ISO 14820-2 (2019-01).
DIN EN ISO 4613-2:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995 + AMD 1:2004); German version EN ISO 4613-2:1995 + A1:2004
DIN EN ISO 2818:1997 Plastics - Preparation of test specimens by machining (ISO 2818:1994); German version EN ISO 2818:1996
DIN EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996 + Amd.1:2004); English version of DIN EN ISO 294-2:2006-05
DIN EN ISO 10724-2:2000-12 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
DIN EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation English version of DIN EN 1482-2:2007-04
DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DIN 6120-1:1996 Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials - Part 1: Graphical symbols
DIN 6120-2:1996 Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials - Part 2: Supplementary marking
DIN EN 12814-7:2022-11 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German and English version prEN 12814-7:2022 / Note: Date of issue 2022-10-14*Intended as replacement for DIN EN 12814-7 (2003-01).
DIN CEN/TS 16010:2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2013
DIN EN 12814-7:2003-01 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002 / Note: To be replaced by DIN EN 12814-7 (2022-11).
DIN EN ISO 6529:2003-01 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002 / Note: To be replaced by DIN EN 12814-7 (2022-11).
DIN SPEC 16457:2019-12 Short fiber reinforced thermoplastics - Tension-compression-shear test with tube specimens under cyclic loading
DIN EN ISO 14529-2:2000-08 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999
DIN EN ISO 14528-2:2000-08 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999
DIN 16781-2:1989 Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties

British Standards Institution (BSI), plastic sample box

22/30449570 DC Plastics. Test specimens
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 20753:2018 Tracked Changes. Plastics. Test specimens
BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS ISO 20753:2008 Plastics - Test specimens
BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN ISO 294-2:2018 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
BS EN ISO 21970-2:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 3167:2003 Plastics - Multipurpose test specimens
BS EN ISO 3167:2014 Plastics. Multipurpose test specimens
BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 24022-2:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 23153-2:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Sample preparation
BS PD CEN/TS 16010:2020 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
BS EN ISO 1110:2019 Tracked Changes. Plastics. Polyamides. Accelerated conditioning of test specimens
BS EN ISO 19064-2:2020 Plastics. Styrene-acrylonitrile (SAN) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 294-4:2019 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
18/30382578 DC BS EN ISO 294-3. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 3. Small plates
BS EN ISO 294-1:1997 Plastics - Injection moulding of test specimens of thermoplastic materials - General principles, and moulding of multipurpose and bar test specimens
BS EN ISO 294-1:2017 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. General principles, and moulding of multipurpose and bar test specimens
BS EN ISO 21301-2:2019 Plastics. Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 2818:1996 Plastics - Preparation of test specimens by machining
BS EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Sampling
BS EN ISO 294-2:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Small tensile bars
BS EN ISO 294-2:1997 Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
BS EN ISO 19063-2:2020 Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 24026-2:2020 Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 21306-2:2019 Tracked Changes. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 21302-2:2019 Tracked Changes. Plastics. Polybutene-1 (PB-1) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 16012:2015 Plastics. Determination of linear dimensions of test specimens
BS EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements
BS EN ISO 1163-2:2000 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1163-2:1996 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 1482-3:2016 Fertilizers and liming materials. Sampling and sample preparation. Sampling of static heaps
BS 5551-2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS 2782-9 Method 940A:1990 Methods of testing plastics - Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics in the form of bars with a specified reversion
BS EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties
BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
BS EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Preparation of test specimens and determination of properties

TH-TISI, plastic sample box

TIS 1002-2010 Plastic canteens

Indonesia Standards, plastic sample box

SNI 19-4786-1998 Plastic canteens
SNI ISO 3167:2011 Plastics - Multipurpose test specimens
SNI 06-4595-1998 Plastics - Injections moulding test specimens of thermo plastic materials
SNI ISO 295:2011 Plastics - Compression moulding of test specimens of thermosetting materials

Japanese Industrial Standards Committee (JISC), plastic sample box

JIS C 8435:1999 Boxes and box covers of plastic conduits
JIS C 8435:2018 Boxes and covers of plastic conduits
JIS S 6051:1985 Plastics card cases
JIS S 6051:2006 Plastics card cases
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7139:2009 Plastics -- Test specimens
JIS K 7153:2008 Plastics -- Determination of linear dimensions of test specimens
JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS K 7139:2007 Plastics -- Multipurpose test specimens
JIS K 7139:1996 Plastics -- Multipurpose test specimens
JIS K 7364-2:2004 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6937-2:2002 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS K 7152-1:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
JIS K 6717-2:1999 Plastics -- Poly(methyl methacrylate)(PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6717-2:2006 Plastics -- Poly (methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7144:1999 Plastics -- Preparation of test specimens by machining
JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
JIS K 6922-2:2005 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-2:2005 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:2010 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-2:2010 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:2018 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7241:2023 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame
JIS K 6949:2015 Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
JIS K 6934-2:1999 Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7152-3:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS K 7152-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
JIS K 7152-4:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage

SE-SIS, plastic sample box

SIS 20 01 01
SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials
SIS 20 01 02
SIS SS 16 11 57-1982 Plastics - Amorphous thermoplastic moulding materials - Preparation of test specimens with a defined level of shrinkage - Part 2: Test specimens in the form of rectangular plates (Injection moulding)
SIS SS 24 10 22-1982 Plastics - Film and sheeting - Determination of tear resistance - Trouser shaped test piece
SIS SS 16 11 55-1984 Plastics - Preparation of test specimens by machining

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic sample box

GB/T 32094-2015 Plastic crisper
GB/T 30401-2013 Plastic storage container
GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
GB/T 2547-2008 Plastic resins-Sampling
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 11997-2008 Plastic.Multipurpose test specimens
GB/T 2547-1981 Plastic resins--Sampling
GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materails--Part 1: General principles and moulding of multipurpose and bar test specimens
GB/T 5471-1985 Preparation method for compression moulding of specimens of thermosetting moulding materials
GB 3186-1982 Sampling paint products

Professional Standard - Light Industry, plastic sample box

QB/T 1587-2006 Plastic pencil box
QB/T 5815-2023 Biodegradable plastic insulation box

CU-NC, plastic sample box

NC 97-73-1986 Packaging. Plastic Boxes for Agricultural Products Quality Specifications
NC 97-64-1985 Packaging. Plastic Boxes for Soft Drinks Packages Quality Specifications
NC 97-98-1987 Packing and Packaging. Piascic Boxes for Milk and Milk tiy-Products . Quality Specifications
NC 97-65-1985 Packaging. Plastic Boxes for Beer and Malt Packages Quality Specifications

Korean Agency for Technology and Standards (KATS), plastic sample box

KS T 1354-2016 Returnable transport packaging — Plastic boxes for marine product
KS T 1354-2016(2021) Returnable transport packaging — Plastic boxes for marine product
KS C 8436-2012(2022) Boxes and covers of plastic conduits
KS M ISO 20753-2014(2019) Plastics — Test specimens
KS M ISO 16012-2014(2019) Plastics — Determination of linear dimensions of test specimens
KS M ISO 3167:2012 Plastics－Multipurpose test specimens
KS M ISO 3167-2012(2017) Plastics－Multipurpose test specimens
KS M ISO 3167:2022 Plastics — Multipurpose test specimens
KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
KS T 1352-2016(2021) Returnable transport packaging — Testing for plastic boxes
KS M ISO 8986-2:2013 PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 8986-2:2008 Plastics-Polybutylene(PB) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 16012:2014 Plastics — Determination of linear dimensions of test specimens
KS M ISO 15526-2-2006(2011) Plastics－Polyketone(PK) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 3673-2:2012 Plastics-Epoxy resins-Part 2:Preparation of specimens and determination of properties
KS M ISO 3673-2:2013 Plastics — Epoxy resins-Part 2: Preparation of specimens and determination of properties
KS M ISO 9772:2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
KS M ISO 7792-2-2013(2018) Plastics ㅡ Thermoplastic polyester(TP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 15103-2-2012(2017) Plastics－Poly(phenylene ether)(PPE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 8986-2-2013(2018) PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 9988-2-2012(2017) Plastics－Polyoxymethylene(POM) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

FI-SFS, plastic sample box

SFS C.5.62-1963 Muovinen vaihtomuhvi (MPHS-muhvi)
SFS C.5.64-1963 Vinylimuovinen jatkosmuhvi (MPHV-muhvi)
SFS C.5.61-1963 Polyeteenimuovinen jatkosmuhvi (M PH P-m uh vi)
SFS 3257-1976 MUOVIT. KESTOMUOVISET RUISKUPURISTETUT KOEKAPPALEET
SFS C.5.65-1963 Jatkosmuhveilla varustettu muovinen putkikaari (MPKH-kaari)

Military Standards (MIL-STD), plastic sample box

DOD A-A-53144-1987 TUBE, BIOLOGICAL CULTURE SAMPLING (PLASTIC)
DOD A-A-54873-1993 BOXES, MICROSCOPE SLIDE, PLASTIC
DOD A-A-54567-1992 SPECULUM, VAGINAL, PLASTIC

未注明发布机构, plastic sample box

DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy
BS EN ISO 10724-1:2001(2002) Plastics — Injection moulding oftest specimens of thermosetting powder moulding compounds (PMCs) — Part1 : Generalprinciples and moulding ofmultipurpose test specimens
DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
BS EN ISO 9988-2:2015 Plastics — Polyoxymethylene (POM) moulding and extrusion materials Part 2 : Preparation of test specimens and determination of properties

International Organization for Standardization (ISO), plastic sample box

ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 20753:2008 Plastics - Test specimens
ISO 20753:2018 Plastics - Test specimens
ISO 2818:2018 Plastics — Preparation of test specimens by machining
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO/DIS 20753:2023 Plastics — Test specimens
ISO/FDIS 20753:2023 Plastics — Test specimens
ISO 294-5:2001/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy; Amendment 1
ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
ISO 3167:2002 Plastics - Multipurpose test specimens
ISO 3167:1993 Plastics; multipurpose test specimens
ISO 3167:2014 Plastics - Multipurpose test specimens
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
ISO 294-1:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 16012:2004/cor 1:2005 Plastics - Determination of linear dimensions of test specimens; Technical Corrigendum 1
ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 1872-2:1989 Plastics; polyethylene (PE) and ethylene copolymer thermoplastics; part 2: preparation of test specimens and determination of properties
ISO 8986-2:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO/DIS 17855-2:1980 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO/DIS 19069-2:1980 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 2818:1974 Title missing - Legacy paper document
ISO 2818:1980 Plastics; Preparation of test specimens by machining
ISO 2818:1994 Plastics - Preparation of test specimens by machining
ISO 294-2:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO 294-1:1996/Amd 1:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens; Amendment 1
ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1110:2019 Plastics — Polyamides — Accelerated conditioning of test specimens
ISO 10724:1994 Plastics - Thermosetting moulding materials - Injection moulding of multipurpose test specimens
ISO 294-3:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
ISO 294-3:2002/Amd 1:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates; Amendment 1
ISO/DIS 5667-27:2023 Water quality — Sampling — Part 27: Guidance on sampling for microplastics in water
ISO 9988-2:2006 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

CH-SNV, plastic sample box

VSM 34161.2-1972

ES-UNE, plastic sample box

UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
UNE-EN ISO 20753:2019 Plastics - Test specimens (ISO 20753:2018)
UNE-CEN/TS 16010:2022 EX:2022 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE-EN ISO 14526-2:2000 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 14526-2:1999)
UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
UNE-EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
UNE-EN ISO 24025-2:2021 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020)
UNE-EN ISO 14530-2:2001 Plastics. Unsaturated-polyester powder moulding compouns (UP-PMCs). Part 2: Preparation of test specimens and determination of properties. (ISO 14530-2:1999)
UNE-EN ISO 14529-2:2000 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 14529-2:1999)
UNE-EN ISO 14528-2:2000 PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCs) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (ISO 14528-2:1999)

ES-AENOR, plastic sample box

UNE 53-250-1991

Aerospace Industries Association/ANSI Aerospace Standards, plastic sample box

AIA/NAS NAS3409-2012 BOX, PLASTIC, CUSHIONED Rev 2

RO-ASRO, plastic sample box

STAS 6572-1968
STAS 2897-1980 METALIC CASE FOR COAL SPEC IMENS Shape and dimensions
STAS 5887-1968
STAS 2055/1-1985 ABRASIVE MATERIALS Sampling and sample making
SR ISO 295:1994 Plastics Compression moulding of test specimens of termosetting materials
STAS 5874-1983 PLASTICS Determination of flexural propertie? of rigid plastics
STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree

CEN - European Committee for Standardization, plastic sample box

EN ISO 20753:2018 Plastics - Test specimens
EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage

国家市场监督管理总局、中国国家标准化管理委员会, plastic sample box

GB/T 37426-2019 Plastics—Test specimens
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
GB/T 17037.1-2019 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1:General principles，and moulding of multipurpose and bar test specimens
GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
GB/T 39812-2021 Plastics—Preparation of test specimens by machining

CZ-CSN, plastic sample box

CSN 37 0116-1962 Square plastic box for electrical installations
CSN 64 0015-1965 Scale and sample card of colour shades í plastics
CSN 37 0120-1962 Plastio branch box for electrical installation
CSN 37 0111-1958
CSN 37 0744-1962 Connection boxes for plastics-insulated flat conduetors
CSN 26 9109-1991 Plastic stacking bins
CSN 64 0201-1990 Plastics tests. Sampling
CSN 37 0112-1958
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 37 0118-1958
CSN 37 0102-1957
CSN 64 0701-1975 Sampling and conditioning of test pecimens of poromeres, artificial eathers etc. of plastics products
CSN 64 0210-1987 Injection moulding of test specimens of hermoplastics
CSN 37 0117-1958
CSN 37 0114-1958
CSN 37 0104-1957
CSN 64 0903-1988 Plasties. Ion exehange resins. Sampling
CSN ON 85 6262-1964
CSN 64 0205-1979 Plaslies. Preparatiou of test pecimens írom casting resins

PL-PKN, plastic sample box

PN O79751-1989 Plastics consumer packages Boxes Classification
PN O79831-1985 Plastics cases Determination of resistance of carrying handle
PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN C04707-1974 Dyestuiffs Sampling and preparation of samples
PN C89008-1973 Plas?ics Prepara?ion of specimens for optical ?es?s Casting me?hod

IN-BIS, plastic sample box

PT-IPQ, plastic sample box

SAE - SAE International, plastic sample box

SAE AS4491-1991 Plastic Disposable Cartridge@ Plunger@ Nozzles and Cartridge Assembly
SAE AS4491A-2012 Plastic Disposable Cartridge@ Plunger@ Nozzles and Cartridge Assembly

Aerospace Industries Association, plastic sample box

AIA NAS 3409-1971 Box, Plastic, Cushioned (Rev. 1)

AIA/NAS - Aerospace Industries Association of America Inc., plastic sample box

NAS3409-2012 BOX@ PLASTIC@ CUSHIONED (Rev 2)
NAS3409-1971 Box@ Plastic@ Cushioned (Rev 1)

TR-TSE, plastic sample box

TS 1149-1978 PLASTICS - INJECTION MOULDING TEST SPECIMENS OF TERMOPLASTIC MATERIALS
TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
TS 3460-1980 PLASTICS - AMORPHOUS THERMOPLASTIC MOULDING MATERIALS — PREPARATION OF TEST SPECIMENS WITH A DEFINED LEVEL OF SHRINKAGE —PART 1: TEST SPECIMENS IN THE FORM OF PARALLELEPIPEDIC BARS (INJECTION MOULDING AND COMPRESSION MOULDING)

American National Standards Institute （ANSI), plastic sample box

ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens
ANSI/ASTM D1898:1997 Practice for Sampling of Plastics
ANSI/ASTM D4204:2000 Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ANSI/ASTM D1045:1995 Methods of Sampling and Test Plasticizers used in Plastics (08.01)

HU-MSZT, plastic sample box

ZA-SANS, plastic sample box

SANS 5591:1975 Preparation of samples and extracts used in testing plastics for medical use

KR-KS, plastic sample box

KS M ISO 3167-2022 Plastics — Multipurpose test specimens
KS M ISO 9772-2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

YU-JUS, plastic sample box

JUS G.S2.607-1980 Plastics. Recommended practice for injection moulding of thermoplastic specimens
JUS G.S2.606-1980 Plastics. Recommended practice for moulding of thermoplastic specimens

BR-ABNT, plastic sample box

RU-GOST R, plastic sample box

GOST 12015-1966 Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 12019-1966 Plastics. Preparation of test speciments from thermoplastics. General conditions
GOST 19599-1990 Plastics. Polyamides. Accelerated conditioning of test specimens
GOST 26277-1984 Plastics. Preparation of test specimens by machining
GOST 19679-1974 Plastics. Preparation of injection moulded and compression moulded specimens for optical testing of thermoplastics
GOST 12423-1966 Plastics. Standard atmospheres for conditioning and testing specimens
GOST R 57222-2016 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
GOST 33694-2015 Plastics. Determination of linear dimensions of test specimens

CL-INN, plastic sample box

AT-ON, plastic sample box

ONR CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates

IT-UNI, plastic sample box

UNI CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates

Lithuanian Standards Office , plastic sample box

LST CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
LST EN ISO 3167:2015 Plastics - Multipurpose test specimens (ISO 3167:2014)
LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
LST EN 1482-2-2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
LST EN ISO 3167:2003 Plastics - Multipurpose test specimens (ISO 3167:2002)

American Society for Testing and Materials (ASTM), plastic sample box

ASTM D6988-03 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM D5947-02 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-06 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-03 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-96 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D5947-01e1 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D7308-17 Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
ASTM D4204-00 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D7308-17(2022) Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
ASTM D7308-07(2012) Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM D4204-12 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D4204-16 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D4204-16(2023) Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D1045-95 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM D1045-95(2001) Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D7308-07 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM E2015-99 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
ASTM D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D3641-97 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D3641-02 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D3641-15 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

Professional Standard - Commodity Inspection, plastic sample box

SN/T 0906-2000 Method for injection moulding test spcimens of thermoplastic materials for import and export

BE-NBN, plastic sample box

NBN T 40-108-1988 Plastics and ebonite - Determination of température of deflection under load

Taiwan Provincial Standard of the People's Republic of China, plastic sample box

CNS 10989-1984 Methods for Reducing Field Samples of Aggregate to Testing Size
CNS 4395-1978 Compression Moulding Test Specimens of Thermoplastic Materials
CNS 4394-1978 Injection Moulding Test Specimens of Thermoplastic Material

U.S. Military Regulations and Norms, plastic sample box

ARMY MIL-HDBK-700 A-1975 PLASTICS

Professional Standard - Aviation, plastic sample box

HB 6841-1993 Technical requirements and evaluation methods of plastic mold cavity surface roughness samples and plastic samples

Standard Association of Australia （SAA）, plastic sample box

AS 1774.4.4:2001 Refractories and refractory materials - Physical test methods - Preparation of test pieces - Mouldable refractories