ZH
RU
ES

bulk surface phase

bulk surface phase, Total:498 items.

In the international standard classification, bulk surface phase involves: Paints and varnishes, Insulating materials, Products of the chemical industry, Vocabularies, Road engineering, Electricity. Magnetism. Electrical and magnetic measurements, Rubber and plastics products, Insulating fluids, Surface treatment and coating, Iron and steel products, Paint coating processes, Graphic technology, Rubber, Protection against fire, Fluid power systems, Fertilizers, Fluid storage devices, Valves, Photography, Medical equipment, Wastes, Materials and articles in contact with foodstuffs, Electronic components in general, Structures of buildings, Construction materials, Welding, brazing and soldering, Petroleum products in general, Analytical chemistry, Particle size analysis. Sieving, Hydraulic fluids, Reinforced plastics, Powder metallurgy, Testing of metals, Nuclear energy engineering, Products of the textile industry, Leather technology, Fasteners, Aircraft and space vehicles in general, Inorganic chemicals, Semiconducting materials, Linear and angular measurements, Fasteners for aerospace construction, Electrical and electronic testing, Microbiology, Conducting materials, Ceramics, Piezoelectric and dielectric devices, Organic chemicals, Thermodynamics and temperature measurements, Installations in buildings, Components for electrical equipment.

Association Francaise de Normalisation, bulk surface phase

• UTE C26-141U*UTE C26-141:1976 Solid insulating materials. Varnished fabrics. Relevant article sheets.
• UTE C26-170U*UTE C26-170:1986 Solid insulating materials. Vulcanized fibre for electrical purposes. Relevant article sheets.
• NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
• NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
• NF EN 60343:1993 Méthodes d'essai recommandées pour la détermination de la résistance relative des matériaux isolants au claquage par les décharges superficielles
• NF C26-240*NF EN 60343:1993 Recommanded test methods for determining the relative resistance of insulating materials to breakdown by surface discharges.
• NF EN ISO 9864:2005 Géosynthétiques - Méthode d'essai pour la détermination de la masse surfacique des géotextiles et produits apparentés
• NF EN ISO 23157:2022 Détermination de la teneur en groupes silanol à la surface de la silice pyrogénée - Méthode par analyse chromatographique en phase gazeuse des gaz de réaction
• NF T73-290*NF EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two phase titration method
• NF EN 14668:2005 Agents de surface - Détermination des agents de surface ammonium quaternaire dans les matières premières et les produits formulés - Méthode de titrage potentiométrique dans deux phases
• NF ISO 6072:2012 Caoutchoucs - Compatibilité des fluides hydrauliques avec les matériaux élastomères de référence
• NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
• NF EN 61099:2011 Liquides isolants - Spécifications relatives aux esters organiques de synthèse neufs destinés aux matériels électriques
• UTE C93-331U*UTE C93-331:1973 Components for electronic equipment. Magnetic components and ferrite materials. Inductor of low self-inductance value. Relevant article sheets.
• NF EN 15330-1:2013 Sols sportifs - Surfaces en gazon synthétique et surfaces en textile aiguilleté principalement destinées à l'usage en extérieur - Partie 1 : spécifications relatives aux surfaces en gazon synthétique destinées à la pratique du football, du ho...
• NF EN 14667:2005 Agents de surfaces - Détermination des solvants à faible point d'ébullition dans les formulations liquides - Méthode par chromatographie en phase gazeuse
• NF E29-648-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1 : metallic materials.
• NF E29-648-1*NF EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1 : metallic materials
• NF EN 12701:2001 Adhésifs structuraux - Stockage - Définition des termes et expressions relatifs à la durée de vie des adhésifs structuraux et matériaux connexes
• NF E29-648-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: non-metallic materials
• NF X30-559*NF EN 45559:2019 Methods for providing information relating to material efficiency aspects of energy-related products
• NF C26-215:1982 Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.
• NF P11-213-1/A1:2007 DTU 13.3 - Paving - Design, calculation and production - Part 1 : contract bill of technical clauses for paving for industrial or related use.
• NF EN IEC 63093-9:2020 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 9 : noyaux planaires
• NF E29-648-2*NF EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials
• NF P11-213-1:2005 DTU 13.3 - Paving - Design, calculation and production - Part 1 : contract bill of technical clauses for paving for industrial or related use.
• NF EN IEC 63093-13:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 13 : noyaux PQ
• NF P11-213-2:2005 DTU 13.3 - Paving - Design, calculation and production - Part 2 : contract bill of technical clauses for paving for use other than industrial or related uses.
• NF EN 14981:2007 Agents de surface - Détermination de la teneur en solvants à point d'ébullition élevé dans les détergents liquides par chromatographie en phase gazeuse
• XP T35-502-1-1999 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness.
• NF T35-503-5*NF EN ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5 : replica tape method for the determination of the surface profile
• NF EN 15330-4:2022 Sols sportifs - Surfaces en gazon synthétique et surfaces en textile aiguilleté principalement destinées à l'usage en extérieur - Partie 4 : spécifications relatives aux couches de souplesse utilisées avec les sols sportifs en gazon synthétiqu...
• NF P11-213-2/A1:2007 DTU 13.3 - Paving - Design, calculation and production - Part 2 : contract bill of technical clauses for paving for use other than industrial or related uses.
• NF T35-502-2*NF EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2 : laboratory determination of chloride on cleaned surfaces
• NF T35-501-4:2020 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4 : initial surface conditions, preparation grades and flash rust grades in connection with water jetting
• NF A84-039*NF EN ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
• NF T60-138*NF EN ISO 20823:2004 Petroleum and related products - Determination of flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
• NF EN ISO 20823:2004 Pétrole et produits connexes - Détermination des caractéristiques d'inflammabilité de fluides au contact de surfaces chaudes - Essai d'inflammation sur métal chaud
• NF T35-502-2:2006 Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part 2 : laboratory determination of chloride on cleaned surfaces.
• NF T35-502-3*NF EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3 : assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
• NF A84-039/A1*NF EN ISO 9539/A1:2014 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes - Amendment 1
• NF EN ISO 105-Z10:2000 Textiles - Essais de solidité des teintures - Partie Z10 : détermination de l'intensité relative de la couleur des colorants en solution
• NF EN ISO 22553-4:2020 Peintures et vernis - Peintures d'électrodéposition - Partie 4 : compatibilité des peintures d'électrodéposition avec des matières liquides, pâteuses et solides
• NF EN 15571:2020 Machines et installations d'extraction et d'usinage des pierres naturelles - Sécurité - Prescriptions relatives aux machines de finition de surface
• NF E29-648-4:2006 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : test methods for selecting metallic materials resistant to hydrogen embrittlement.
• NF EN ISO 11114-4:2017 Bouteilles à gaz transportables - Compatibilité des matériaux et des robinets avec les contenus gazeux - Partie 4 : Méthodes d'essai pour le choix de matériaux métalliques résistants à la fragilisation par l'hydrogène
• NF T30-312-4*NF EN ISO 22553-4:2020 Paints and varnishes - Electro-deposition coatings - Part 4 : compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
• NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
• NF EN ISO 11114-3:2011 Bouteilles à gaz - Compatibilité des matériaux de bouteilles et de robinets avec les contenus gazeux - Partie 3 : essai d'auto-inflammation des matériaux non métalliques sous atmosphère d'oxygène
• NF E29-648-5*NF EN ISO 11114-5:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5 : test methods for evaluating plastic liners
• NF EN ISO 11114-5:2022 Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 5 : méthodes d'essai pour l'évaluation des liners en plastique

Standard Association of Australia （SAA）, bulk surface phase

• AS 1580.603.1:2002 Paints and related materials - Methods of test - Finish - General appearance
• AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test - Surface dry condition
• AS 4049.1:2005 Paints and related materials - Pavement marking materials - Solvent-borne paint - For use with surface applied glass beads
• AS 4049.3:2005/Amdt 1:2006
• AS 4049.5:2007 Paints and related materials - Pavement marking materials - Performance assessment of pavement markings
• AS 4049.3:2005 Paints and related materials - Pavement marking materials - Waterborne paint - For use with surface applied glass beads
• AS 1580.603.1:2002(R2013)
• AS 1580.0:2004 Paints and related materials - Methods of test - Introduction and list of methods
• AS 4049.2:2005 Paints and related materials - Pavement marking materials - Thermoplastic pavement marking materials - For use with surface applied glass beads
• AS 1580.409.3:2002 Paints and related materials - Methods of test - Blocking resistance of latex paint finishes
• AS 4049.3/AMD 1:2006 Amendment No.1 to AS 4049.3-2005 Paints and related--Pavement marking materials Part 3: Waterborne paint--For use with surface applied glass beads
• AS ISO 18114:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
• AS 4955.1:2003 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials
• AS 1580.409.3:2002(R2013)
• AS 3558.24:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to hot liquids of the surface of sinks

SE-SIS, bulk surface phase

• SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges
• SIS SS-ISO 8503-1:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates

IN-BIS, bulk surface phase

• IS 8171-1984
• IS 4041-1967
• IS 6597-1972
• IS 4261-1967
• IS 11221-1984
• IS 1191-1971
• IS 3069-1965
• IS 3810 Pt.3-1977
• IS 3396-1979
• IS 6461 Pt.2-1972
• IS 3810 Pt.1-1977
• IS 3810 Pt.2-1977
• IS 2824-1975

Professional Standard - Machinery, bulk surface phase

• JB/T 3282-1999 Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges

RO-ASRO, bulk surface phase

• STAS 10369-1975 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the relative resistance to breakdown by surface discharges
• STAS SR ISO 8504-2:1995 Preparation of steel substrates before application of paints and related products - Surface preparation methods-Part 2:Abrasive blast-cleaning

American Society for Testing and Materials (ASTM), bulk surface phase

• ASTM D1331-20 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
• ASTM D1331-14 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
• ASTM D1079-05a Terminology Relating to Roofing and Waterproofing
• ASTM D1079-05 Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
• ASTM D1079-06 Terminology Relating to Roofing and Waterproofing
• ASTM D8-17 Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D1079-02 Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
• ASTM D1079-01 Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
• ASTM D1079-00a Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
• ASTM D8-13a Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D8-22a Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D8-97 Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D8-12 Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D8-13 Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D8-11 Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D7805-13(2021) Standard Terminology for Printing Ink Vehicles and Related Materials
• ASTM D5682-18 Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
• ASTM D5682-18(2023) Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
• ASTM F1027-86(2012) Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
• ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
• ASTM D5568-22 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
• ASTM E208-95a(2000) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
• ASTM F1027-86(2007) Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
• ASTM E2089-15(2020) Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
• ASTM E2089-15 Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
• ASTM D3514/D3514M-10 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
• ASTM A453/A453M-02 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
• ASTM A453/A453M-00 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
• ASTM D5568-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
• ASTM F1027-86(2002) Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
• ASTM F1027-86(1995)e1 Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
• ASTM F1027-86(2017) Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
• ASTM D3906-03(2008) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
• ASTM A453/A453M-04 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
• ASTM D6097-16 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
• ASTM D3906-97 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
• ASTM F3214-18 Standard Practice for Characterization of Fire Properties of Materials Specified for Vehicles Associated with Amusement Rides and Devices
• ASTM D7449/D7449M-22 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
• ASTM D7449/D7449M-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
• ASTM D7464-19 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
• ASTM D7464-20 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
• ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
• ASTM D3906-03(2013) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
• ASTM D268-22 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
• ASTM D7464-08(2013) Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
• ASTM D7449/D7449M-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
• ASTM E2490-08 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
• ASTM E2490-09(2021) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
• ASTM D7836-13(2020) Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
• ASTM D7836-13 Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
• ASTM D1686-96(2004) Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
• ASTM D7449/D7449M-08e1 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
• ASTM D7449/D7449M-08 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
• ASTM D2275-22 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
• ASTM C1127-01(2009) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
• ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, bulk surface phase

• GB/T 22689-2008 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
• GB/T 14832-1993 Test of compatibility between rubber material and hydraulic fluid
• GB/T 14832-2008 Test methods for compatibility between hydraulic fluids and standard elastomeric materials
• GB/T 28607-2012 Determination of compatibility between standard elastomeric materials and automotive engine oil
• GB/T 31481-2015 Guidance for gas/materials compatibility of cryogenic vessels
• GB/T 23296.7-2009 Food contact materials.Determination of epichlorohydrin in plastics.High performance liquid chromatography
• GB/T 23296.13-2009 Food contact materials.Determination of vinyl chloride monomer in plastics.Gas chromatography
• GB/T 42529-2023 Evaluation Requirements for Moisture Conduction and Phase Change Breathing Function of New Wall Materials
• GB/T 4207-2012/IEC 60112-2009 Method for the determination of the proof and the comparative tracking indicesof solid insulating materials
• GB/T 4207-2012/IEC 60112:2009 Method for the determination of the proof and the comparative tracking indicesof solid insulating materials
• GB/T 4207-2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
• GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
• GB/T 5654-1985 Measurement of relative permittivity,dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
• GB/T 5654-2007 Insulating liquids.Measurement of relative permittivity,dielectric dissipation factor and d.c.resistivity

Professional Standard - Military and Civilian Products, bulk surface phase

• WJ 1590-1984 Camera Surface Finishing Appearance Classification of Camera Plating (Cladding) Layers and Technical Requirements for Substrate Surface

ES-AENOR, bulk surface phase

• UNE 49 802 h3
• UNE 53-567-1989

Korean Agency for Technology and Standards (KATS), bulk surface phase

• KS C IEC 60343:2002 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
• KS C IEC 60343-2002(2022) Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
• KS B ISO 6072-2002(2012) Hydraulic fluid power－Compatibility between elastomeric materials and fluids
• KS C IEC 60343-2002(2017) Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
• KS M ISO 8503-5:2018 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
• KS B ISO 11114-1:2007 Transportable gas cylinders-Compatibility of cylinder and valve materials with gas contents-Part 1:Metallic materials
• KS B ISO 11114-1:2016 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
• KS B ISO 11114-1-2023 Gas cylinders Compatibility of cylinder and cylinder valve materials with the gas they contain Part 1: Metallic materials
• KS B ISO 11114-2:2015 Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials
• KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
• KS B ISO 11114-2:2007 Transportable gas cylinders-Compatibility of cylinder and valve materials with gas contents-Part 2:Non-metallic materials
• KS M ISO 20823-2004(2019) Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test
• KS M ISO 20823:2004 Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test
• KS C IEC 60093:2004 Methods of test for volume resistivity and surface resistivity of solid electric insulating materials
• KS M ISO 8502-2:2021 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness —Part 2: Laboratory determination of chloride on cleaned surfaces
• KS X ISO 11084-1:2006 Graphic technology－Register systems for photographic materials, foils and paper－Part 1：Three-pin systems
• KS M ISO 8503-1:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 1: Specifications and definitions for ISO
• KS M ISO 8501-2:2019 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after lo
• KS M ISO 8504-1:2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 1: General principles
• KS M ISO 8502-3:2021 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surface prepared for painting(
• KS M ISO 8504-2:2021 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surface prepared for painting(
• KS M ISO 8503-5:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
• KS K ISO 9864-2007(2022) Geosynthetics－Test method for the determination of mass per unit area of geotextiles and geotextile-related products
• KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
• KS C IEC 62631-3-2-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

American National Standards Institute （ANSI), bulk surface phase

• ANSI/ICPA SS-1-2001 Performance Standard for Solid Surface Materials
• CGA M-19-2023 Standard for Biocompatibility of Materials for Medical Gas Equipment - Second Edition
• ANSI/ASTM D3756:1997 Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
• ANSI/ASTM D7449:2008 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Transmission Line

Professional Standard - Commodity Inspection, bulk surface phase

• SN/T 2896-2011 Food contact materials for export. Metal materials. Determination of phenol in coating. High performance liquid chromatography
• SN/T 2897-2011 Food contact materials for export. Metal materials. Determination of epichlorohydrin in coating. Gas chromatography
• SN/T 2898-2011 Food contact materials for export-Metal materials.Determination the migration of vinyl chloride in surface coat.Gas chromatography mass spectrometry
• SN/T 3547-2013 Food contact materials.Polymers determination of styrene monomer.Gas chromatography

RU-GOST R, bulk surface phase

• GOST 27427-1987 Electrical insulating materials. Test methods for relative determination of resistance to break-down by surface discharges
• GOST R ISO 2943-2011 Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
• GOST 25698-1998 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
• GOST 25698-1983 Powder articles. Methods of determination of hardness
• GOST 25937-1983 Materials for shoes. Method for determination of specific volume and surface resistance
• GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity

British Standards Institution (BSI), bulk surface phase

• BS EN 60343:1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
• BS EN 45559:2019 Methods for providing information relating to material efficiency aspects of energy-related products
• BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
• BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
• BS EN ISO 11114-1:2012+A1:2017 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
• BS EN ISO 11114-1:2012 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
• BS EN ISO 11114-1:2020+A1:2023 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Metallic materials
• BS EN ISO 11114-2:2013 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials
• BS EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• BS EN 14668:2005(2006) Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• BS EN ISO 8503-5:2004 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Replica tape method for the determination of the surface profile
• BS EN ISO 19712-3:2022 Tracked Changes. Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
• BS EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
• BS EN ISO 8502-5:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
• 20/30409889 DC BS ISO 18114. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
• BS 7079-D1:2000 Preparation of steel substrates before application of paints and related products. Methods for surface preparation. General principles
• BS EN ISO 9539:2010+A1:2013 Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes
• BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
• BS ISO 18114:2021 Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
• 21/30425697 DC BS EN IEC 63177. Test method for compatibility of construction materials with electrical insulating liquids
• 22/30420646 DC BS ISO 4410. Experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
• BS EN ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Laboratory determination of chloride on cleaned surfaces
• PD IEC TS 61994-4-4:2018 Tracked Changes. Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric materials. Single crystal wafers for surface acoustic wave (SAW) devices
• BS EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
• BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
• BS EN ISO 8503-5:2017 Tracked Changes. Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Replica tape method for the determination of the surface profile
• PD IEC TS 61994-4-1:2018 Tracked Changes. Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric materials. Synthetic quartz crystal
• BS EN ISO 11114-5:2022 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Test methods for evaluating plastic liners
• BS EN ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
• BS 6829-3.1:1989 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass
• BS EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials. Determination of resistive properties (DC Methods). Surface resistance and surface resistivity
• 19/30375689 DC BS EN ISO 8501-4. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 4. Initial surface conditions, preparation grades and flash rust grades in connection with water jetting
• BS EN ISO 8502-3:2017 Tracked Changes. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
• BS EN ISO 8504-2:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast cleaning
• BS EN ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products. Surface preparation methods. Abrasive blast cleaning
• 22/30454754 DC BS EN ISO 11114-1:2020 AMD1. Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Part 1. Metallic materials
• BS EN ISO 8502-2:2017 Tracked Changes. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces
• BS EN ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of welds, edges and other areas with surface imperfections
• DD ENV 623-5-2002 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
• BS EN ISO 22553-4:2020 Paints and varnishes. Electro-deposition coatings - Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
• BS EN ISO 8501-3:2007 Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of welds, edges and other areas with surface imperfections
• BS 7251-14:1998 Orthopaedic joint prostheses - Components for partial and total knee-joint prostheses - Articulating surfaces made of metal, ceramic and plastics materials
• BS ISO 20579-4:2018 Surface chemical analysis. Guidelines to sample handling, preparation and mounting. Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis

ES-UNE, bulk surface phase

• UNE-EN 45559:2019 Methods for providing information relating to material efficiency aspects of energy-related products
• UNE-EN ISO 8501-4:2021 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020)
• UNE-EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)
• UNE-EN ISO 8504-2:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
• UNE-EN ISO 8504-1:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)
• UNE-EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
• UNE-EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (Endorsed by AENOR in May of 2013.)

German Institute for Standardization, bulk surface phase

• DIN EN 45559:2019-10 Methods for providing information relating to material efficiency aspects of energy-related products; German version EN 45559:2019
• DIN EN 60343:1994 Recommended test methods for determinig the relative resistance of insolating materials to breakdown by surface discharges test methods (IEC 60343:1991); German version EN 60343:1993
• DIN EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005
• DIN EN 14668 Berichtigung 1:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005, Corrigenda to DIN EN 14668:2005-09; German version EN 14
• DIN ISO 18902:2010 Imaging materials - Processed imaging materials - Albums, framing and storage materials (ISO 18902:2007 + Cor. 1:2009)
• DIN EN ISO 8504-1:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000); German version EN ISO 8504-1:2001
• DIN EN 252:1990 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; german version EN 252:1989
• DIN EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method; German version EN 14667:2005
• DIN EN 14667:2005-09 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method; German version EN 14667:2005
• DIN EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
• DIN EN ISO 8504-2:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001
• DIN IEC 60093:1993 Methods of test for insulating materials for electrical purposes; volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980); German version HD 429 S1:1983
• DIN EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
• DIN EN ISO 8501-4:2021-02 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:202...
• DIN EN 14668:2005-09 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005
• DIN EN 14331:2004 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method; German version EN 14331:2004
• DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
• DIN EN ISO 8503-2:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator pro...
• DIN EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
• DIN EN ISO 8502-3:2017-05 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017);...
• DIN EN ISO 8502-5:2005-03 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998);...
• DIN EN 252:2015 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; German version EN 252:2014
• DIN 55540-1 Beiblatt 1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
• DIN EN 14668 Berichtigung 1:2006-08 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005, Corrigenda to DIN EN 14668:2005-09; German version EN...
• DIN EN ISO 11114-2:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO/DIS 11114-2:2020); German and English version prEN ISO 11114-2:2020
• DIN EN ISO 8502-2:2017-05 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017); German version EN ISO 8502-2:2017
• DIN EN ISO 20823:2003-10 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003); German version EN ISO 20823:2003
• DIN 50447:1995 Testing of materials for semiconductor technology - Contactless determination of the electrical sheet resistance of semiconductor layers with the eddy-current method
• DIN EN ISO 8504-3:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993); German version EN ISO 8504-3:2001
• DIN EN ISO 8502-2:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005); English version of DIN EN ISO 8502-2:
• DIN 55540-1 Beiblatt 1:1979-01 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
• DIN EN ISO 8503-4:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of...
• DIN EN ISO 8503-3:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of...
• DIN EN ISO 8502-3:1999 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992); Ge
• DIN EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC; German version EN 12139:1999
• DIN EN ISO 8504-1:2020-03 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019); German version EN ISO 8504-1:2019
• DIN EN ISO 8504-2:2020-03 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019); German version EN ISO 8504-2:2019
• DIN EN ISO 8503-1:2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
• DIN EN ISO 8503-5:2017-07 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017); German...
• DIN 18534-3:2017-07 Waterproofing for indoor applications - Part 3: Waterproofing with liquid-applied waterproofing materials in conjunction with tiles and paving / Note: Applies in conjunction with DIN 18534-1 (2017-07).
• DIN EN ISO 8503-1:2013-05 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of a...
• DIN EN ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017); German ve
• DIN EN ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); English version of DIN EN ISO 11114-4
• DIN EN ISO 8504-1:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019)
• DIN EN ISO 8504-2:2020 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)
• DIN EN ISO 11114-3:2011-04 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010); German version EN ISO 11114-3:2010

未注明发布机构, bulk surface phase

• BS 6324-3:1983(1999) Terms relating to surgical implants — Part 3 : Glossary of terms relating to materials
• DIN EN 45559:2019 Method for providing information about material efficiency aspects of energy-related products
• ISO 8502-3:1992/Cor 1:1993 Preparation of steel substrates before application of coatings and related products. Tests for assessment of surface cleanliness. Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) Technical Corrigendum 1
• BS EN ISO 8502-5:2004*BS 7079-B5:2004 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5 : Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

BE-NBN, bulk surface phase

• NBN-EN 60343-1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
• NBN-EN 24498-1-1993 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 1: Materials of essentially uniform section hardness (ISO 4498-1: 1990)

PT-IPQ, bulk surface phase

• NP 2885-1984
• NP 3757-1989 SOLID FUELS Cokes Determination of true relative density, apparent relative density and porosity
• NP 2882-1984
• NP 253-1985 Matériaux plastiques. Tubes en matlères thermoplastiques pour le transport des fluides. Diamètres extérieurs nominaux et pressions nomlnales
• NP 2874-1985
• NP 2875-1985
• NP 2888-1984
• NP EN ISO 4618-3:2001 Paints and varnishes Terms and definitions for caoting materials PArt 3:Surface preparation and methods of application(ISO 4618-3:1999)
• NP 2884-1984
• NP 2893-1985
• NP 2887-1984
• NP 1520-1988
• NP 3668-1988

International Electrotechnical Commission (IEC), bulk surface phase

• IEC 60343:1991 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
• IEC 60216-5:2008/COR1:2009 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material; Corrigendum 1
• IEC TS 61994-4-4:2018 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for s
• IEC TS 61994-4-4:2018 RLV Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for s
• IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity

NEMA - National Electrical Manufacturers Association, bulk surface phase

• NEMA EW 5-1982 GUIDELINES FOR THE PREPARATION OF THE MATERIAL SAFETY DATA SHEET FOR WELDING CONSUMABLES AND RELATED PRODUCTS

ZA-SANS, bulk surface phase

• SANS 5775:2004 Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile of blast-cleaned surfaces determined by metallographic section
• SANS 5772:2004 Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile of blast-cleaned surfaces determined by a micrometer profile gauge

Danish Standards Foundation, bulk surface phase

• DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
• DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
• DS/EN 14668/AC:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• DS/EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• DS/EN 13965-1:2004 Characterization of waste - Terminology - Part 1: Material related terms and definitions
• DS/EN 14667:2005 Surface active agents – Determination of low boiling solvents in liquid formulations – Gas chromatographic method
• DS/EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
• DS/EN ISO 8501-4:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
• DS/ISO 8501-4:2020 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness – Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting
• DS/EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
• DS/EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
• DS/ISO 11127-3:2021 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 3: Determination of apparent density
• DS/EN ISO 8503-5:2005 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
• DS/ISO 11124-5:2020 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 5: Cut steel wire
• DS/EN ISO 8501-4:2020 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness – Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020)
• DS/EN ISO 8502-2:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
• DS/ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 1: Sampling
• DS/EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
• DS/EN ISO 8504-2:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
• DS/IEC 93:1982 Methods of test for volume resistivity of solid electrical insulating materials
• DS/EN ISO 11127-3:2021 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 3: Determination of apparent density (ISO 11127-3:2021)
• DS/EN ISO 20823:2004 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
• DS/ISO 11127-5:2021 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 5: Determination of moisture
• DS/EN ISO 8502-3:2000 Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
• DS/EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
• DS/EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
• DS/EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
• DS/ISO 11127-2:2021 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 2: Determination of particle size distribution
• DS/EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
• DS/EN ISO 11114-3:2011 Gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
• DS/EN ISO 8501-3:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections

IPC - Association Connecting Electronics Industries, bulk surface phase

• IPC TM-650 2.5.17.1A-1994 Volume and Surface Resistivity of Dielectric Materials
• IPC TM-650 2.5.17E-1998 Volume Resistivity and Surface Resistance of Printed Wiring Materials
• IPC TM-650 2.5.17D-1986 Volume Resistivity and Surface Resistance of Printed Wiring Materials

AENOR, bulk surface phase

• UNE-EN 60343:1996 RECOMMENDED TEST METHOD FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES.
• UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
• UNE-EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• UNE-EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
• UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
• UNE-EN ISO 8501-4:2008 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting (ISO
• UNE-EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
• UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
• UNE-EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012)
• UNE-EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)
• UNE-EN ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017)
• UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
• UNE-EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
• UNE-EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
• UNE-EN ISO 20823:2004 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003)
• UNE-EN ISO 8504-1:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles. (ISO 8504-1:2000)
• UNE-EN ISO 8504-2:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning. (ISO 8504-2:2000)

Professional Standard - Public Safety Standards, bulk surface phase

• GA 111-1995 Solid room fire test method for surface materials

European Committee for Standardization (CEN), bulk surface phase

• EN 12944-2:1999 Fertilizers and Liming Materials - Vocabulary - Part 2: Terms Relating to Fertilizers
• prEN 60343-1992 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 343:1991)
• EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
• EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012)
• EN 14668:2005/AC:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• EN ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
• EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
• EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
• EN 252:1989 Field Test Method for Determining the Relative Protection Effectiveness of a Wood Preservative in Ground Contact
• EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
• EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021)
• EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
• EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• EN 14331:2004 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle destillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method
• EN ISO 8503-1:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abr
• EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
• EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
• EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)
• EN ISO 8502-2:1999 Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness Part 2: Laboratory Determination of Chloride on Cleaned Surface ISO 8502-2:1992
• FprEN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO/FDIS 11114-2:2021)
• EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test ISO 20823:2003
• EN ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement

PL-PKN, bulk surface phase

• PN M73052-1990 Hydraulic fluids power Compatibility between elastomeric materials and fluids
• PN-EN ISO 8501-4-2021-04 E Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020
• PN-EN ISO 11127-3-2021-07 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 3: Determination of apparent density (ISO 11127-3:2020)
• PN-EN ISO 11114-1-2020-11 E Gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 1: Metallic materials (ISO 11114-1:2020)
• PN-EN ISO 8504-1-2020-04 D Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles (ISO 8504-1:2019)
• PN-EN ISO 11127-5-2021-07 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 5: Determination of moisture (ISO 11127-5:2020)
• PN-EN ISO 11127-1-2021-07 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 1: Sampling (ISO 11127-1:2020)
• PN-EN ISO 11127-2-2021-07 E Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives--Part 2: Determination of particle size distribution (ISO 11127-2:2020)

European Committee for Electrotechnical Standardization（CENELEC）, bulk surface phase

• EN 60343:1992 Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface Discharges
• HD 429 S1-1983 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials
• EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
• EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
• EN IEC 63093-10:2022 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts

NL-NEN, bulk surface phase

• NEN 10343-1993 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 343:1991)
• NEN 1878-1993 Automatical data processing. Interchange format for data of objects related to the earth's surface

CEN - European Committee for Standardization, bulk surface phase

• EN ISO 8503-5:2004 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blastcleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
• EN ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces

Lithuanian Standards Office , bulk surface phase

• LST EN 60343-2002 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 60343:1991)
• LST EN 14668-2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• LST EN 14668-2005/AC-2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
• LST EN 13965-1-2005 Characterization of waste - Terminology - Part 1: Material related terms and definitions
• LST EN 14667-2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
• LST EN ISO 8501-4:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting (ISO
• LST EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
• LST EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012)
• LST HD 429 S1-2002 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980)
• LST EN ISO 8503-5:2005 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003)
• LST EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
• LST EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
• LST EN ISO 11114-2:2002 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000)
• LST EN ISO 8502-2:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005)
• LST EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
• LST EN ISO 20823:2004 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003)
• LST EN ISO 8504-2:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
• LST EN ISO 8504-1:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)

TH-TISI, bulk surface phase

• TIS 285 Pt.9-1981 Standard methods of test for paints, varnishes and related materials. Part 9: Surface-drying test-ballotini method
• TIS 2460-2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
• TIS 285.3-2010 Standard test methods for paints varnishes and related materials.part 3: standard panels for testing

International Organization for Standardization (ISO), bulk surface phase

• ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
• ISO 8504-2:2019 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
• ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
• ISO 19712-1:2008 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
• ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
• ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
• ISO 8504-1:2019 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles
• ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
• ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
• ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
• ISO 11114-2:2000 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
• ISO 8504-3:2018 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 3: Hand- and power-tool cleaning
• ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
• ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
• ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
• ISO 8502-9:2020 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water
• ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
• ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
• ISO 8504-4:2022 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4: Acid pickling
• ISO 9539:2010/Amd 1:2013 Gas welding equipment.Materials for equipment used in gas welding, cutting and allied processes; Amendment 1
• ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application
• ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement

NO-SN, bulk surface phase

• NS 5922-1981 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids

KR-KS, bulk surface phase

• KS M ISO 8503-5-2018 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
• KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
• KS M ISO 8502-2-2021 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness —Part 2: Laboratory determination of chloride on cleaned surfaces
• KS M ISO 8503-1-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 1: Specifications and definitions for ISO
• KS M ISO 8501-2-2019 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after lo
• KS M ISO 8504-1-2021 Preparation of steel substrates before application of paints and related products — Surface preparation methods —Part 1: General principles
• KS M ISO 8504-2-2021 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surface prepared for painting(
• KS M ISO 8502-3-2021 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surface prepared for painting(
• KS M ISO 8502-4-2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensat
• KS M ISO 8503-5-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
• KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

IT-UNI, bulk surface phase

• UNI 4288-1972
• UNI 4452-1960
• UNI CEI EN 45559-2021 Methods for providing information relating to material efficiency aspects of energy-related products

GOSTR, bulk surface phase

• GOST ISO 11114-1-2017 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 1. Metallic materials
• GOST R ISO 14624-7-2010 Space systems. Safety and compatibility of materials. Part 7. Determination of penetration of materials to aerospace fluids
• GOST R ISO 14624-6-2010 Space systems. Safety and compatibility of materials. Part 6. Determination of reactivity of processing material with aerospace fluids

CZ-CSN, bulk surface phase

• CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
• CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
• CSN ISO 3004-3:1993 Light gauge metal containers. Capacities and related caross-sections. Part 3: Open-top cans for drinks

VN-TCVN, bulk surface phase

• TCVN 6874-1-2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:Metallic materials
• TCVN 6874-3-2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents .Part 3:Autogenous ignition test for non-metallic materials in oxygen atmosphere

CENELEC - European Committee for Electrotechnical Standardization, bulk surface phase

• PREN 45559-2018 Methods for providing information relating to material efficiency aspects of energy-related products

ICEA - Insulated Cable Engineers Association Inc., bulk surface phase

• T-32-645-1993 Establishing Compatibility of Sealed Conductor Filler Compounds with Conducting Stress Control Materials
• T-32-645-2012 Test Method for Establishing Volume Resistivity Compatibility of Water Blocking Components With Extruded Semiconducting Shield Materials

CH-SNV, bulk surface phase

• SN EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
• SN EN ISO 11127-3:2021 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density(ISO 11127-3:2020)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, bulk surface phase

• GB/T 36083-2018 Nanotechnology—Silver nanomaterials—Guidance for the characterization of biological effect-related physicochemical properties

SG-SPRING SG, bulk surface phase

• SS 5 Pt.A3-1985 Methods Of Test For Paints, Varnishes And Related Materials Part A3 : Preparation Of Panels Prior To Painting

Japanese Industrial Standards Committee (JISC), bulk surface phase

• JIS C 2139:2008 Solid electrical insulating materials -- Methods for the determination of volume resistivity and surface resistivity
• JIS K 5600-3-4:1999 Testing methods for paints -- Part 3: Film formability -- Section 4: Evaluation of the compatibility of product with a surface to be painted
• JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity

US-MSFC, bulk surface phase

• MSFC-PROC-3257-2002 OUTGASSING TEST PROCEDURE FOR NON-METALLIC MATERIALS ASSOCIATED WITH CONTAMINATION SENSITIVE SURFACES IN A THERMAL VACUUM ENVIRONMENT

United States Navy, bulk surface phase

• NAVY MIL-STD-1386-46 VALID NOTICE 1-1987 LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS PROJECTILES, 6" AAC, HC OR AP IN PALLET ADAPTER MARK 4 AND MODS FLEET ISSUE UNIT LOAD
• NAVY MIL-STD-1386-46-1974 LOADING OF HAZARDOUS MATERIALS AND ASSOCIATED ITEMS IN MILVAN CONTAINERS PROJECTILES, 6" AAC, HC OR AP IN PALLET ADAPTER MARK 4 AND MODS FLEET ISSUE UNIT LOAD

Insulated Cable Engineers Association （ICEA), bulk surface phase

• ICEA T-32-645-2012 TEST METHOD FOR ESTABLISHING VOLUME RESISTIVITY COMPATIBILITY OF WATER BLOCKING COMPONENTS WITH EXTRUDED SEMICONDUCTING SHIELD MATERIALS

IEC - International Electrotechnical Commission, bulk surface phase

• TS 61994-4-4-2018 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for surface acoustic wave (SAW) devices (Edition 3.0)
• TS 61994-4-4 (REDLINE + STANDARD)-2018 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for surface acoustic wave (SAW) devices (Edition 3.0)
• TS 61994-4-1 (REDLINE + STANDARD)-2018 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal (Edition 3.0)
• TS 61994-4-1-2018 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal (Edition 3.0)

Group Standards of the People's Republic of China, bulk surface phase

• T/CNEA 101.29-2021 PWR pressure boundary components—Material— Part 29:Specification for high-temperature bolting, with expansion coefficients comparable to austenitic stainless steels

Guangdong Provincial Standard of the People's Republic of China, bulk surface phase

• DB44/T 1232-2013 Test Method for Determination of Surface Tension of Solid Coatings, Substrates, and Pigments Contact Angle Method

Universal Oil Products Company (UOP), bulk surface phase

• UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

ESDU - Engineering Sciences Data Unit, bulk surface phase

• SPB-M6-2-2010 Apr.08: Colloidal Interactions Between Asphaltene and Different Surfaces Measured by Atomic force microscopy (AFM)

Others:   bulk surface phase.