ZH
RU
ES

Various particle size testing methods

Various particle size testing methods, Total:470 items.

In the international standard classification, Various particle size testing methods involves: Ferrous metals, Ferroalloys, Cereals, pulses and derived products, Cutting tools, Kitchen equipment, Testing of metals, Animal feeding stuffs, Cork and cork products, Particle size analysis. Sieving, Refractories, Materials for aerospace construction, Iron and steel products, Ceramics, Construction materials, Soil quality. Pedology, Spices and condiments. Food additives, Products of the chemical industry, Inorganic chemicals, Road vehicle systems, Road engineering, Fuels, Non-ferrous metals, Pesticides and other agrochemicals, Clothes, Metalliferous minerals, Analytical chemistry, Environmental protection, Paint ingredients, Equipment for the chemical industry, Air quality, Medical equipment, Rubber, Protection against dangerous goods, Rubber and plastics products, Powder metallurgy, Test conditions and procedures in general, Insulating materials, Gas and steam turbines. Steam engines, Adhesives, Electromagnetic compatibility (EMC), Audio, video and audiovisual engineering, Microbiology, Special purpose vehicles, External structures, Sacks. Bags, Industrial furnaces, Organic chemicals, Pipeline components and pipelines, Wastes, Protective equipment, Surface treatment and coating, Plastics, Aids for disabled or handicapped persons, Wood, sawlogs and sawn timber, Milk and milk products, Water quality.

Korean Agency for Technology and Standards (KATS), Various particle size testing methods

KS D 4121-2009 TESTING METHOD OF CAST SHOT AND GRIT GRAIN SIZE
KS L 6524-2013 TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS L 3504-2008(2018) Testing method for grain size of castable refractories
KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
KS M 1425-2004(2010) Testing method for particle size distribution of palletized media by sieving
KS L 6529-2003 Test method for bulk density of artificial abrasive microgrits
KS L 6528-2003 Test method for bulk density of artificial abrasive macrogrits
KS M 1425-2013 Testing method for particle size distribution of palletized media by sieving
KS C IEC 60315-9:2004 Methods of measurement on radio receivers for various classesof emission-Part 9:Measurement of the characteristicsrelevant to radio dats system(RDS) reception
KS C IEC 60315-9:2013 Methods of measurement on radio receivers for various classesof emission－Part 9：Measurement of the characteristicsrelevant to radio dats system(RDS) reception
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS B ISO 8573-8-2005(2010) Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS I ISO 10155:2008 Stationary source emissions-Automated monitoring of mass concentrations of particles-Performance characteristics, test methods and specifications
KS I ISO 10155-2008(2018) Stationary source emissions－Automated monitoring of mass concentrations of particles－Performance characteristics, test methods and specifications
KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 2：Bulk density
KS P ISO 17190-3:2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 3: Test method for determination of the particle size distribution by sieve fractionation

AENOR, Various particle size testing methods

UNE 68081:1988 SOWING EQUIPMENT. SINGLE SEED DRILLS (PRECISION DRILLS). TEST METHODS.
UNE-EN 1015-1:1999 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (BY SIEVE ANALYSIS)
UNE-EN 1015-1:1999/A1:2007 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
UNE 77219:1998 STACIONARY SOURCE EMISSIONS. AUTOMATED MONITORING OF MASS CONCENTRATIONS OF PARTICLES. PERFORMANCE CHARACTERISTICS, TEST METHODS AND SPECIFICATIONS.
UNE-EN 13590:2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
UNE-EN ISO 11125-2:1997 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. (ISO 11125-2:1993).

ES-AENOR, Various particle size testing methods

UNE 68-081-1988

Japanese Industrial Standards Committee (JISC), Various particle size testing methods

JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS G 5904:1966 Testing method of cast shot and grit grain size
JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
JIS R 2652:1991 Testing method for grain size of light weight castable refractories
JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS B 8392-8:2008 Compressed air -- Part 8: Test methods for solid particle content by mass concentration

RU-GOST R, Various particle size testing methods

GOST ISO 605-2013 Pulses. Determination of impurities, size, foreign, odours, insects, and species and variety. Test methods
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST 25498-1982 Manganese ores concentrates and agglomerates. Methods of sampling and sample preparation for the determination of the grain composition
GOST 17495-1980 Iron ores, concentrates, agglomerates and pellets. Methods of sampling and sample preparation for size determination
GOST R EN 13274-7-2009 Occupational safety standards system. Respiratory protective devices. Methods of test. Part 7. Determination of particle filter penetration

SA-SASO, Various particle size testing methods

SASO SSA 372-1983 METHODS OF TEST FOR BREAD PREPARED FROM THE VARIOUS KINDS OF WHEAT FLOUR

American National Standards Institute （ANSI), Various particle size testing methods

ANSI/ASTM F2861:2010 TEST METHOD FOR ENHANCED PERFORMANCE OF COMBINATION OVEN IN VARIOUS MODES1
ANSI/ASHRAE 52.2-1999 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ANSI/ASHRAE 52.2a-2006 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

Standard Association of Australia （SAA）, Various particle size testing methods

AS 1733:1976 Methods for the determination of grain size in metals
AS 1141.11.1:2020 Methods for sampling and testing aggregates, Method 11.1: Particle size distribution — Sieving method
AS 1141.11.1:2009/Amdt 1:2011
AS 1141.11:1996 Methods for sampling and testing aggregates - Particle size distribution by sieving
AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating
AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
AS 1141.19:1998 Methods for sampling and testing aggregates - Fine particle size distribution in road materials by sieving and decantation
AS 1289.3.5.1:2006 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the soil particle density of a soil - Standard method
AS 1141.11.2:2019 Methods for sampling and testing aggregates, Method 11.2: Particle size distribution for vision sizing systems
AS 1774.2:2001 Refractories and refractory materials - Physical test methods - Determination of bulk density of granular materials
AS 1141.7:1995 Methods for sampling and testing aggregates - Apparent particle density of filler
AS 1141.6.2:1996 Methods for sampling and testing of aggregates - Particle density and water absorption of coarse aggregate - Pycnometer method
AS 2909.4:1986 Methods of measurement on radio receivers for various classes of emission - Radio-frequency measurements on receivers for frequency-modulated sound-broadcasting emissions
AS 1141.19:2018 Methods for sampling and testing aggregates, Method 19: Fine particle size distribution in road materials by sieving and decantation
AS 1289.3.6.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
AS 1289.3.6.1:2009
AS 1289.3.6.3:2020 Methods of testing soils for engineering purposes, Part 3.6.3: Soil classification tests — Determination of the particle size distribution of a soil — Standard method of fine analysis using an hydrometer
AS 1774.2:2001(R2013)
AS 1289.3.6.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method)
AS 1141.19:1998(R2013)
AS 1289.6.8.1:1995 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials
AS 2300.10.5:1991 Methods of chemical and physical testing for the dairying industry - Caseins, caseinates and coprecipitates - Determination of particle-size distribution in caseins

Military Standard of the People's Republic of China-General Armament Department, Various particle size testing methods

GJB 772.101-1989 Test methods for explosives Particle size determination Water sieve method
GJB 772.108-1990 Test Methods for Explosives Particle Size Determination Dry Sieving Method
GJB 1047.11-1990 Black powder test method Determination of particle size
GJB 772.102-1989 Test methods for explosives Particle size determination microscopy
GJB 772.103-1989 Test methods for explosives Particle size determination Disk centrifugal sedimentation method
GJB 737.10-1993 Test method for pyrotechnics agent Particle size determination Coulter method
GJB 1047.11A-2020 Test methods for black powder Part 11: Determination of particle size
GJB 1047.11A-2004 Test methods for black powder Part 11: Determination of particle size
GJB 737.11-1993 Test methods for pyrotechnic chemicals Particle size determination Scanning electron microscopy
GJB 578-1988 Test method for moisture bleed fastness of special synthetic fiber silk
GJB 771.106-1991 Test methods for gunpowder performance. Screening method for determination of propellant particle size distribution.
GJB 8683.6-2015 Test methods for physical parameters of pyrotechnics Part 6: Particle size determination and screening method
GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 8670.5-2015 Test methods for special bullet effects Part 5: Thermocouple method for determination of ignition flame temperature of arson bombs
GJB 8670.6-2015 Test methods for special bomb effects Part 6: Determination of flame temperature of arson bombs Thermal radiation method
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 8684.21-2015 Pyrotechnic powder performance test methods Part 21: Determination of mass concentration of smoke solid particles Filter membrane weighing method
GJB 5214.12-2003 Special ammunition effect test method Part 12: Photographic method for measuring effective smoke screen width and effective smoke screen height of smoke projectiles
GJB 8670.11-2015 Special ammunition effect test method Part 11: Photographic method for determination of effective smoke screen width and effective smoke screen height of smoke projectiles
GJB 5214.19-2003 Special bomb effect test method Part 19: Bandpass method for measuring infrared radiation intensity of infrared jamming bombs
GJB 533.19-1988 Methods for detection of 45 components of submarine cabin air. Determination of sodium sarcosinate and dimethylamine content. Copper reagent absorbance method.

CZ-CSN, Various particle size testing methods

CSN 46 7092-35-1998 Testing methods for feeding stuffs - Part 35: Determination of granularity
CSN 46 7013 Cast.3/2-1977 Testing methods for fodder mixtures. Sensory and physical tests. Determination of granularity
CSN 46 7092-38-1998 Testing methods for feeding stuffs - Part 38: Determination of granules strength when pressed
CSN 46 7092-30-1998 Testing methods for feeding stuffs - Part 30: Determination of the water extract acidity in milk feeding mixtures stuffs

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Various particle size testing methods

GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
GB/T 13025.1-1991 General test method in salt industry--Determination of grain size
GB/T 13025.1-2012 General test method in salt industry.Determination of grain size
GB/T 4195-1984 Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles
GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
GB/T 12496.2-1999 Test methods of wooden activated carbon-Determination of particle size distribution
GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
GB/T 4197-1984 Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys
GB/T 21865-2008 Standard test methods for determining average grain size using semiautomatic and automatic image analysis
GB/T 14634.4-2002 Test methods of rare earth three-band phosphors for fluorescent lamps-Determination of particle size distribution by electric sensing zone technique
GB/T 8117.2-2008 Rules for steam turbine thermal acceptance tests.Part 2:Method B.Wide range of accuracy for various types and sizes of turbines
GB/T 30921.6-2016 Test method of purified terephthalic acid (PTA) for industrial use.Part 6:Determination of particle size distribution
GB/T 20170.1-2006 Test method of physical characters of rare earth metals and compounds.Determination for particle size distribution of rare earth compounds

American Society for Testing and Materials (ASTM), Various particle size testing methods

ASTM E776-87(2004) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E112-96(2004)e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e3 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e1 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-13(2021) Standard Test Methods for Determining Average Grain Size
ASTM E112-10 Standard Test Methods for Determining Average Grain Size
ASTM E112-12 Standard Test Methods for Determining Average Grain Size
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F577-03 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F577-03e1 Standard Test Method for Particle Size Measurement of Dry Toners
ASTM F577-83(1997) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM E1037-21 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM F577-03(2009) Standard Test Method for Particle Size Measurement of Dry Toners
ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM D5444-98 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM E727/E727M-08(2013) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
ASTM D4513-11 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D2977-03 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM D6173-97(2014) Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D4513-97(2006) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-97 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-97(2001)e1 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-22 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM E1037-84(1996)e1 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM E1037-84(2009) Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D5158-98(2019) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
ASTM F1926/F1926M-14(2021) Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
ASTM D5644-96 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Vulcanized Particulate Rubber
ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM E1382-97 Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM E1382-97(2004) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM D4570-02(2012) Standard Test Method for Rubber Chemicalsmdash;Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM F2622-08 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2622-20 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM C1070-01(2007) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM B430-97(2001) Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B430-97(2001)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM C1070-01 Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM C678-75(1991)e1 Test Method for Determination of Particle Size Distribution of Alumina or Quartz Using Centrifugal Sedimentation
ASTM B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM C1182-91(2001) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photo sedimentation
ASTM D4570-02(2017) Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM F1226-89(1994)e1 Standard Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)
ASTM D4464-00 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
ASTM D4464-00(2005) Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D4513-11(2017) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM D4570-02 Standard Test Method for Rubber Chemicals8212;Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D5288-97 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D4464-10 Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
ASTM D5644-18 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5288-21 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM C690-03 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
ASTM C690-09 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
ASTM C1070-01(2014) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM D4570-02(2007) Standard Test Method for Rubber Chemicalsx2014;Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D4570-86(1998) Standard Test Method for Rubber Chemicals-Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM D4570-02(2021) Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D4464-15(2020) Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
ASTM D4464-15 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
ASTM F2622-08e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM E1382-97(2015) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM C1070-01(2020) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM C1730-17(2022) Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
ASTM E1382-97(2010) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM D6467-21e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D5158-23 Standard Test Method for Determination of Particle Size of Fine Mesh and Powdered Activated Carbon by Air-Jet Sieving
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM C958-92(2000) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM D6586-03(2008) Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
ASTM C958-92(2022) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM C1730-17 Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
ASTM E1382-97(2023) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM B822-10 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM B822-97 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM D6814-02(2008) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM D6814-02(2013) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM D4438-13 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM C958-92(2007) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM D6733-01(2006) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D6733-01 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Meter Capillary High Resolution Gas Chromatography
ASTM B761-98 Standard Test Method for Particle Size Distribution of Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D4438-13(2018)e1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM B822-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B822-20 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM C958-92(1997)e1 Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM C958-92(2014) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM B761-17(2021) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM D6886-18 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D6331-98(2005) Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-98 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-13 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
ASTM C690-86(1997)e1 Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
ASTM C690-09(2019) Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
ASTM C721-20 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM D7608-18 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM E1458-12(2022) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM C1624-05(2010) Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D7614-12 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
ASTM D5511-94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM D5511-12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
ASTM F1632-02 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM F1632-03(2018) Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM B797-20 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption

IN-BIS, Various particle size testing methods

The American Road & Transportation Builders Association, Various particle size testing methods

AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes Twentieth Edition R(1999)

AASHTO - American Association of State Highway and Transportation Officials, Various particle size testing methods

T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
T 88-2000 Standard Method of Test Particle Size Analysis of Soils
T88-1993 Standard Method of Test for Particle Size Analysis of Soils
T 219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes
T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
T88-2000 Standard Method of Test for Particle Size Analysis of Soils (Twentieth Edition)
T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Bituminous-Aggregate Mixtures (Twentieth Edition; ASTM D2489-67(1980))

British Standards Institution (BSI), Various particle size testing methods

21/30439740 DC BS 8442. Miscellaneous road traffic signs and devices. Requirements and test methods
BS 3482-7:1991 Methods of test for desiccants - Determination of particle size
23/30471179 DC BS 8442 AMD 1. Miscellaneous road traffic signs and devices. Requirements and test methods
BS 8442:2022 Tracked Changes. Miscellaneous road traffic signs and devices. Requirements and test methods
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS 5663-2:1987 Methods of testing iron ores - Determination of size distribution by sieving
BS 812 Sec.103.2:1989 Testing aggregates. Method for determination of particle size distribution. Sedimentation test
BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear fatigue
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS ISO 20290-5:2023 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of particle size distribution by sieving method
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS EN 13590:2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN 17289-1:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. General information and choice of test methods
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS 6043-2.9:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution
22/30408122 DC BS ISO 20290-5. Aggregates for concrete. Test methods for mechanical and physical properties. Part 5. Determination of particle size distribution by sieving method
19/30380073 DC BS EN 17289-1. Characterization of bulk materials. Determination of a sizeweighted fine fraction and crystalline silica content. Part 1. General information and choice of test methods
BS 4427-11:1983 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Separation by column chromatography and determination of the different phosphate forms
BS 4427-5:1974 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of particle size distribution
BS ISO 22863-6:2021 Fireworks. Test methods for determination of specific chemical substances. Zirconium with a particle size of less than 40 µm by inductively coupled plasma optical emission spectrometry (ICP-OES)
BS EN ISO 11125-2:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
BS EN ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
BS 6043-2.12:1994 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution of fine coke
BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
BS ISO 17190-3:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for determination of the particle size distribution by sieve fractionation

(U.S.) Ford Automotive Standards, Various particle size testing methods

FORD FLTM BO 021-3-2001 METHOD FOR DETERMINING FLOW UNDER LOAD OF VARIOUS PLASTIC MATERIALS AT MODERATE TEMPERATURES

German Institute for Standardization, Various particle size testing methods

DIN 52098:2005 Aggregates test methods - Determination of particle size distribution by wet sieving
DIN 53165:1997 Testing of pigments and extenders - Determination of the relative scattering power of white pigments for different pigment volume concentrations (P.V.C.) - Grey paste method
DIN EN 12697-2:2019-10 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution; German version EN 12697-2:2015+A1:2019
DIN EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution; English version of DIN EN 725-5:2007-04
DIN EN 12697-2:2019 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution (includes Amendment A1:2019)
DIN EN 13590:2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity; German version EN 13590:2003
DIN EN 12697-2:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution (includes Amendment A1:2007); English version of DIN EN 12697-2:2007-11
DIN EN 1015-1:2007-05 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis); German version EN 1015-1:1998+A1:2006
DIN EN 725-5:2007-04 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution; German version EN 725-5:2007
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 1015-1:2007 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis) （includes Amendment A1:2006) English version of DIN EN 1015-1:2007-05
DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN 12697-2:2015 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution; German version EN 12697-2:2015
DIN EN 13590:2003-07 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity; German version EN 13590:2003
DIN EN 17289-1:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods; German version EN 17289-1:2020
DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN 993-18:2002-11 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 17289-1:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods; German version EN 17289-1:2020
DIN EN ISO 11125-2:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997
DIN EN 12192-1:2002-09 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar; German version EN 12192-1:2002

Association Francaise de Normalisation, Various particle size testing methods

NF EN 12697-2/IN1:2019 Mélanges bitumineux - Méthode d'essai - Partie 2 : granulométrie
NF EN 12697-2+A1:2019 Mélanges bitumineux - Méthodes d'essai - Partie 2 : granulométrie
NF P12-301*NF EN 1015-1:1999 Methods of test for mortar for masonry. Part 1 : determination of particle size distribution (by sieve analysis).
NF X45-405:1996 Granular filter media. Test methods. Measurement of the cake density of a filter aid.
NF P98-818-2*NF EN 12697-2+A1:2019 Bituminous mixtures - Test methods - Part 2 : determination of particle size distribution
NF P98-818-2/IN1*NF EN 12697-2/IN1:2019 Bituminous mixtures - Test methods - Part 2 : determination of particle size distribution
NF EN 1015-1:1999 Méthodes d'essai des mortiers pour maçonnerie - Partie 1 : détermination de la répartition granulométrique (par tamisage).
NF EN 1015-1/A1:2007 Méthodes d'essai des mortiers pour maçonnerie - Partie 1 : détermination de la répartition granulométrique (par tamisage)
NF P12-301/A1*NF EN 1015-1/A1:2007 Methods of test for mortar for masonry - Part 1 : determination of particle size distribution (by sieve analysis)
NF C55-553-2*NF EN 60953-2:2003 Rules for steam turbine thermal acceptance tests - Part 2 : method B - Wide range of accuracy for various types and sizes of turbines
NF H34-091*NF EN 13590:2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity.
NF P98-818-2:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2 : Determination of particle size distribution.
NF B42-005:1996 Advanced technical ceramics. Methods of test for ceramic powders. Part 5 : determination of the particle size distribution.
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF B42-001-5*NF EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5 : determination of the particle size distribution.
NF EN 725-5:2007 Céramiques techniques avancées - Méthodes d'essai pour poudres céramiques - Partie 5 : détermination de la distribution granulométrique
NF T76-100-5*NF ISO 16525-5:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 5 : determination of shear fatigue
NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
NF EN 993-17:1999 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 17 : détermination de la masse volumique apparente des matériaux en grains par la méthode au mercure sous vide.
NF EN 12697-28:2020 Mélanges bitumineux - Méthodes d'essai - Partie 28 : préparation des échantillons pour la détermination de la teneur en liant, de la teneur en eau et de la granularité
NF EN 13590:2003 Emballage - Sacs en matériau souple pour le transport de marchandises de détail variées - Caractéristiques générales et méthodes d'essai pour la détermination du volume et de la capacité de transport
NF EN 17289-1:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 1 : informations générales et choix des méthodes d'essai
NF EN 1097-3:1998 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 3 : méthode pour la détermination de la masse volumique en vrac et de la porosité intergranulaire
NF B40-340*NF EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum
NF ISO 16525-4:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 4 : détermination de la résistance au cisaillement et de la résistance électrique des assemblages collés rigide sur rigide
NF T35-507-2*NF EN ISO 11125-2:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2 : determination of particle size distribution

Society of Automotive Engineers (SAE), Various particle size testing methods

SAE J2792-2015 Test Methodology for Evaluating the Chemical Compatibility of Wheel Finishes with Various Chemicals

BR-ABNT, Various particle size testing methods

ABNT NBR 12141-1991

AT-ON, Various particle size testing methods

ONORM M 1157-3-1994 Testing methods for foundry sands - Determination of grain size distribution (sieve grading)

Indonesia Standards, Various particle size testing methods

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
SNI IEC 60953-2:2009 Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Various particle size testing methods

ASHRAE TO-98-14-3-1998 Development of Emission Test Methods and Emission Factors for Various Commercial Cooking Operations

Professional Standard - Rare Earth, Various particle size testing methods

XB/T 701-2015 Samarium cobalt permanent magnet alloy powder test methods.Determination of particle size and distributions
XB/T 701-2007 Test methods samarium cobalt permanent magnet alloy powder- Determination of particle size- Fisher method

YU-JUS, Various particle size testing methods

JUS B.D8.317-1986 Refractories. Methods forphisicat testing. Determinati'on ofparticle si?e distribution
JUS B.D8.311-1984 Refractories. Methods of physical testing. Determ inati on of the bulk density of granular refractory materials and raws
JUS B.G8.156-1987 Methods of physical testing of iron ores. Determination of bu/k density for ores ofmaximum particle size larger than 40 mm
JUS B.G8.155-1987 Methods of physical testing of iron ores. Determination ofbulk density forores ofmaximum particle size 40 mm (orsmaller)

NO-SN, Various particle size testing methods

NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles
NS 8005-1990 Geotechnical testing - Laboratory methods - Grain-size analysis of soil samples

未注明发布机构, Various particle size testing methods

BS 812-103.2:1989(2011) Testing aggregates — Part 103 : Method for determination of particle size distribution — Section 103.2 Sedimentation test
BS 812-103.1:1985(1998) Testing aggregates — Part 103 : Methods for determination of particle size distribution — Section 103.1 Sieve tests
BS EN 60953-2:1996(1999) Rules for steam turbine thermal acceptance tests — Part 2 : Method B : Wide range of accuracy for various types and sizes of turbines
BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications
BS EN 1015-1:1999(2007) Methods of test for mortar for masonry — Part 1 : Determination of particle size distribution (by sieve analysis)
BS 6043-2.12:1994(2011) Methods of sampling and test for Carbonaceous materials used in aluminium manufacture — Part 2 : Electrode coke — Section 2.12 Determination of particle size distribution of fine coke
BS 4427-5:1974(2011) Methods of test for Sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use — Part 5 : Determination of particle size distribution

BE-NBN, Various particle size testing methods

NBN-EN 2591-C1-1993 Aerospace series. Elements of electrical and optical connection. Test methods. Part C1: Endurance at temperature

Lithuanian Standards Office , Various particle size testing methods

LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
LST EN 1015-1-2000 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
LST EN 1015-1-2000/A1-2007 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
LST ISO 10155:2001 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
LST EN 60953-2-2001 Rules for steam turbine thermal acceptance tests. Part 2: Method B. Wide range of accuracy for various types and sizes of turbines (IEC 60953-2:1990)
LST EN 725-5-2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
LST EN 725-5-2007/AC-2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
LST EN 12697-2+A1-2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
LST EN 13590-2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
LST ISO 10155:2001/AC1:2003 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications (idt ISO 10155:1995/Cor.1:2002)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Various particle size testing methods

GJB 5891.5-2006 Test method of loading material for initiating explosive device Part 5: Measurement of grain size Microscopy
GJB 5382.6-2005 Test methods of physical parameter for pyrotechnic. Part 6: Determination of particle size. Sieve method
GJB 5891.6-2006 Test method of loading material for initiating explosive device Part 6: Measurement of grain size Scanning electron microscopy
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method
GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
GJB 5384.21-2005 Test methods of performance for pyrotechnic composition. Part 21: Mass concentration determination of solid smoke particles. Filter paper weighting method

ES-UNE, Various particle size testing methods

UNE-EN 60953-2:1995 RULES FOR STEAM TURBINE THERMAL ACCEPTANCE TESTS.PART 2: METHOD B. WIDE RANGE OF ACCURACY FOR VARIOUS TYPES AND SIZES OF TURBINES. (Endorsed by AENOR in April of 1996.)
UNE-EN 12697-2:2015+A1:2022 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE-EN 725-5:2007/AC:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution (Endorsed by AENOR in October of 2007.)
UNE-EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution (Endorsed by AENOR in March of 2007.)
UNE-EN 17289-1:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods
UNE-EN ISO 11125-2:2019 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:2018)
UNE-EN ISO 11127-2:2022 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2020)

VN-TCVN, Various particle size testing methods

TCVN 6129-1996 Pulses.Determination of impurities, size, foreign odours, insects, and species and variety.Test methods
TCVN 6530-12-2007 Refractories.Method of test.Part 12: Determination of bulk density of granular materials
TCVN 7572-2-2006 Aggregates for concrete and mortar. Test methods. Part 2: Determination of partical size distribution

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Various particle size testing methods

ASHRAE 52.2 INT 5-2007 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASHRAE 52.2 ERTA-2009 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASHRAE 52.2 ERTA-2010 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASHRAE 52.2-2017 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size

NZ-SNZ, Various particle size testing methods

NZS 4402.2.8.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.1: Standard Method by Wet Sieving
NZS 4402.2.8.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.4: Subsidiary Method for Fine Soils (Hydrometer Method)
NZS 4402.2.8.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.3: Standard Method for Fine Soils (Pipette Method)
NZS 4402.2.8.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.2: Subsidiary Method by Dry Sieving
NZS 4402.2.7.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.7: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.1: Method for Coarse, Medium and Fine Soils
NZS 4402.2.7.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils

Association of German Mechanical Engineers, Various particle size testing methods

VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)

Group Standards of the People's Republic of China, Various particle size testing methods

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/BTQSA 005-2020 NdFeB permanent magnet alloy powder physical properties test method laser particle size determination
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle

Inner Mongolia Provincial Standard of the People's Republic of China, Various particle size testing methods

DB15/T 1408-2018 NdFeB permanent magnet alloy powder physical properties test method laser particle size determination

European Committee for Standardization (CEN), Various particle size testing methods

EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 725-5:1996 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 5: Determination of the Particle Size Distribution
EN 12697-2:2015 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
EN 1015-1:1998 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
EN 13590:2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
EN 12697-2:2002 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution Incorporates Amendment A1: July 2007

Danish Standards Foundation, Various particle size testing methods

DS/EN 60953-2:1996 Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
DS/EN 1015-1/A1:2007 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
DS/EN 1015-1:1999 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
DS/ISO 10155/Corr.1:2002 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 9854-2:1999 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charphy method - Part 2: Test conditions for pipes of various materials
DS/EN 725-5/AC:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
DS/EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution
DS/EN 12697-2+A1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
DS/EN 13590:2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DS/ISO 17190-3:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 3: Test method for determination of the particle size distribution by sieve fractionation
DS/ISO 17190-3:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation
DS/EN ISO 11125-2:1998 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution

Professional Standard - Aviation, Various particle size testing methods

HB 5351.7-2004 Test method for properties of investment casting slurry-Part 7:The torque balance sedimentation analytical method for the determination of refractory powder granularity
HB 5351.8-2004 Test method for properties of investment casting slurry-Part 8:The laser speedy mensuration method for the determination of refractory powder granularity

Underwriters Laboratories (UL), Various particle size testing methods

UL 2824-2013 Greenguard - Certification Program Method For Measuring Microbial Resistance From Various Sources Using Static Environmental Chambers

Professional Standard - Automobile, Various particle size testing methods

QC/T 29105.3-2013 Sampling methods of testing particulate contamination of hydraulic oil of special purpose vehicle hydraulic system
QC/T 29105.4-1992 Test method for solid pollution degree of hydraulic oil in hydraulic system of special purpose vehicles Microscopic particle counting method

International Organization for Standardization (ISO), Various particle size testing methods

ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO 13579-11:2017 Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating energy efficiency — Part 11: Evaluation of various kinds of efficiency
ISO 16525-5:2014 Adhesives - Test methods for isotropic electrically conductive adhesives - Part 5: Determination of shear fatigue
ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 20290-5:2023 Aggregates for concrete — Test methods for mechanical and physical properties — Part 5: Determination of particle size distribution by sieving method
ISO 13061-5:2020 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain
ISO 22863-6:2021 Fireworks - Test methods for determination of specific chemical substances - Part 6: Zirconium with a particle size of less than 40 µm by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 11127-2:2020 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution

ETSI - European Telecommunications Standards Institute, Various particle size testing methods

EG 202 518-2008 Speech Processing@ Transmission and Quality Aspects (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.2.1)
EG 202 518-2006 Speech Processing@ Transmission and Quality Aspects (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.1.1)
EG 202 518-2013 Speech and multimedia Transmission Quality (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.4.1)
EG 202 518-2014 Speech and multimedia Transmission Quality (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.4.1)
EG 202 518-2010 Speech and multimedia Transmission Quality (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.3.1)
EG 202 518-2009 Speech and multimedia Transmission Quality (STQ); Acoustic Output of Terminal Equipment; Maximum Levels and Test Methodology for Various Applications (V1.3.1)

国家市场监督管理总局、中国国家标准化管理委员会, Various particle size testing methods

GB/T 40816.11-2021 Industrial furnaces and associated processing equipment—Method of measuring energy balance and calculating energy efficiency—Part 11: Evaluation of various kinds of efficiency

IEC - International Electrotechnical Commission, Various particle size testing methods

TS 62791-2015 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types (Edition 1.0)

CEN - European Committee for Standardization, Various particle size testing methods

EN 12697-2:2015/PRA1:2017 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution

European Committee for Electrotechnical Standardization（CENELEC）, Various particle size testing methods

EN 60953-2:1995 Rules for Steam Turbine Thermal Acceptance Tests Part 2: Method B Wide Range of Accuracy for Various Types and Sizes of Turbines

International Electrotechnical Commission (IEC), Various particle size testing methods

IEC 60953-2:1990 Rules for steam turbine thermal acceptance tests; part 2: method B; wide range of accuracy for various types and sizes of turbines

ESD - ESD ASSOCIATION, Various particle size testing methods

SP5.1.3-2017 Electrostatic Discharge Sensitivity Testing Human Body Model (HBM) Testing – Component Level A Method for Randomly Selecting Pin Pairs

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Various particle size testing methods

PREN 2002-8-1997 Aerospace Series Metallic Materials Test Methods Part 8 - Micrographic Determination of Grain Size (Edition P 2; ASTM E112:1996)

GOSTR, Various particle size testing methods

GOST R ISO 17190-3-2019 Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 3. Determination of particle size distribution by fractionation

Aerospace, Security and Defence Industries Association of Europe (ASD), Various particle size testing methods

ASD-STAN PREN 2002-8-1997 Aerospace Series Metallic Materials Test Methods Part 8 - Micrographic Determination of Grain Size (Edition P 2; ASTM E112:1996)

KR-KS, Various particle size testing methods

KS P ISO 17190-3-2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 3: Test method for determination of the particle size distribution by sieve fractionation

European Association of Aerospace Industries, Various particle size testing methods

AECMA PREN 2002-8-1997 Aerospace Series Metallic Materials Test Methods Part 8 - Micrographic Determination of Grain Size Edition P 2; ASTM E112:1996