ZH
RU
ES

Methanol at 20 degrees

Methanol at 20 degrees, Total:120 items.

In the international standard classification, Methanol at 20 degrees involves: Organic chemicals, Water quality, Fluid storage devices, Thermodynamics and temperature measurements, Wood, sawlogs and sawn timber, Processes of the textile industry, Plastics, Rubber, Products of the chemical industry, Protection of and in buildings, Installations in buildings, Equipment for petroleum and natural gas industries, Air quality, Refrigerating technology, Ferrous metals, Magnetic materials, Petroleum products in general, Ferroalloys, Raw materials for rubber and plastics.

YU-JUS, Methanol at 20 degrees

JUS H.B8.255-1983 Methanol for industrial use. Determination of density at 20° C
JUS H.B8.252-1983 Methanol for industnal use. Evaluation of methanol concentration by measurement of density
JUS H.G8.205-1985 Reagents. Methanol. Determinadon of density at 20°C.\Pycnometer method
JUS H.B8.236-1988 Ethanol for industrial use.Determination of methanol content[(methanol contents between 0,01 and 0,20%(V/V)]Photometric method
JUS H.G8.217-1985 Reagents. Methanol. Determination ofiron content. 1,10-Phenanthrolinespectrophotometric method
JUS H.B8.267-1983 Methanol for industrial use. Determination of iron content. 1, W-Phenanthroline photometric method
JUS H.B8.435-1984 Phthalate, maleate and adipate esters for industrial use. Determination ofviscosity on 2(fCby means of viscometre by Hoppler.

RU-GOST R, Methanol at 20 degrees

GOST 25742.1-1983 Methanol poison, technical. Method for determination of distillation temperature ranges
GOST 21727-1976 Water. Viscosity of water at 20 °C
GOST 16388-1970 Phenol-formaldehyde resins. Method for determination of drop temperature
GOST ISO 279-2014 Essential oils. Method for determination of relative density at a temperature of 20 °C. Reference method
GOST 15981-1970 Apparatus for determining dropping temperature of phenolformaldehyde resins. Specifications
GOST 8.312-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring instruments of variable temperature of water medium in the range of pulsation amplitudes of temperatures within 0,01 -

British Standards Institution (BSI), Methanol at 20 degrees

BS EN 1252-2:2001 Cryogenic vessels - Materials - Toughness requirements for temperatures between -80 °C and -20 °C
BS EN ISO 21028-2:2018 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C
BS 3231:1960 Specification for thermographs (bimetallic type) for air temperatures within the range 0 °F to 140 °F (-20 °C to 60 °C)
BS 3166:1959 Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20 °F to 220 °F ( -30 °C to 105 °C)
BS 6392-6:1983 Testing of ethanol for industrial use - Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method)
BS 6404-20:1996 Magnetic materials - Resistance and temperature classification of insulation coatings

RO-ASRO, Methanol at 20 degrees

STAS 11105-1978 AIR PURITY Determination of methyl alchol

Korean Agency for Technology and Standards (KATS), Methanol at 20 degrees

KS M 1937-2017 Aromatic hydrocarbons－Benzene, xylene and toluene－ Determination of density at 20℃
KS M 1937-2017(2022) Aromatic hydrocarbons－Benzene, xylene and toluene－ Determination of density at 20℃
KS M ISO 1388-7-2017(2022) Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content[methanol contents between 0.01 % and 0.20 %(V/V)] — Photometric method
KS M ISO 1388-7:2002 Ethanol for industrial use－Methods of test－Part 7：Determination of methanol content[methanol contents between 0.01 and 0.20 %(V/V)]－Photometric method
KS M ISO 1388-7:2017 Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content[methanol contents between 0.01 % and 0.20 %(V/V)] — Photometric method
KS B ISO 21028-2:2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
KS M 1982-2017 SecButyl alcohol, methyl ethyl ketone, isobutyl methyl ketone, isoamyl ethyl ketone, diacetone alcohol and hexylene glycol for industrial use — Determination of acidity to phenolphthalein — Volumetric method
KS B ISO 21028-2-2006(2016) Cryogenic vessels－Toughness requirements for materials at cryogenic temperature－Part 2：Temperatures between －80 ℃ and －20℃
KS M ISO 91-2-2008(2018) Petroleum measurement tables－Part 2：Tables based on a reference temperature of 20℃
KS B ISO 21028-2:2006 Cryogenic vessels-Toughness requirements for materials at cryogenic temperature-Part 2:Temperatures between -80 ℃ and -20℃
KS M 1982-2007 Secbutyl alcohol, methyl ethyl ketone,isobutyl methyl ketone, isoamyl ethyl ketone,diacetone alcohol and hexylene glycol for industrial use－Determination of acidity to phenolphthalein－Volumetric method
KS M 1982-2017(2022) SecButyl alcohol, methyl ethyl ketone, isobutyl methyl ketone, isoamyl ethyl ketone, diacetone alcohol and hexylene glycol for industrial use — Determination of acidity to phenolphthalein — Volumetric
KS M ISO 91-2:2008 Petroleum meaurement tables-Part 2: Tables based on a reference temperature of 20℃
KS M 1989-2002(2012) Phthalic and adipic for industrial use－Determination of free alcohols content－Spectrometric method

Natural Gas Processor's Association (NGPA), Methanol at 20 degrees

GPA RR-117-1988 Solubility of Methanol or Glycol in Water-Hydrocarbon Systems
GPA RR-106-1987 Influence of High Concentrations of Methanol on Hydrate Formation and the Distribution of Glycol in Liquid-Liquid Mixtures
GPA RR-104-1987 Equilibrium Solubility of Carbon Dioxide or Hydrogen Sulfide in Aqueous Solutions of Monoethanolamine, Diglycolamine, Diethanolamine and Methyldiethanolamine
GPA TP-25-1998 Temperature Correction for the Volume of Light Hydrocarbons Tables 24E and 23E Errata - 07/20/1999

BE-NBN, Methanol at 20 degrees

NBN T 04-092-1983 Ethanol for industrial use - Determination of methanol content[ methanol contents between 0,01 and 0,20 % (V/V)] - Photometric method
NBN T 04-167-1983 Purified glycerol for industrial use - Determination of density at20 °C
NBN-ISO 91-2:1993 Petroleum measurement tables. Part 2: Tables based on a reference temperature of 20 C

American Society for Testing and Materials (ASTM), Methanol at 20 degrees

ASTM D4773-02 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D4773-02(2007) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D4773-93(1998) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D4773-02(2012) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
ASTM D1107-96 Standard Test Method for Ethanol-Toluene Solubility of Wood
ASTM D1107-21 Standard Test Method for Ethanol-Toluene Solubility of Wood^,
ASTM D5008-07 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
ASTM D4603-96 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM D5008-01 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
ASTM D5008-97e1 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
ASTM D5008-22 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
ASTM D4878-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D4603-03(2011)e1 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM D4878-98 Standard Test Methods for Polyurethane Raw Materials Determination of Viscosity of Polyols
ASTM D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D5008-07(2012) Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

International Organization for Standardization (ISO), Methanol at 20 degrees

ISO 5281:1980 Aromatic hydrocarbons; Benzene, xylene and toluene; Determination of density at 20 degrees C
ISO 1388-7:1981 Ethanol for industrial use; Methods of test; Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)); Photometric method
ISO/R 1903:1971
ISO 21028-2:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between - 80 °C and - 20 °C
ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
ISO 2887:1973 secButyl alcohol, methyl ethyl ketone, isobutyl methyl ketone, isoamyl ethyl ketone, diacetone alcohol and hexylene glycol for industrial use; Determination of acidity to phenolphthalein; Volumetric method
ISO 91-2:1991 Petroleum measurement tables; part 2: tables based on a reference temperature of 20 °C
ISO 1228:1975 Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number

Military Standard of the People's Republic of China-General Armament Department, Methanol at 20 degrees

GJB 3991-2000 Temperature limits inside armored vehicles
GJB 282.1-1987 Armored Vehicle Environmental Conditions Operating Ambient Temperature
GJB 282.2-1987 Armored vehicle environmental conditions Storage ambient temperature

German Institute for Standardization, Methanol at 20 degrees

DIN 58655:1960 Meteorological devices - Ground thermometer 20 up to 310 mm
DIN EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
DIN EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C; German version EN 1252-2:2001
DIN EN ISO 21028-2:2018-07 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018); German version EN ISO 21028-2:2018
DIN 53728-3:1985 Testing of plastics; determination of the viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution

ES-AENOR, Methanol at 20 degrees

ES-UNE, Methanol at 20 degrees

UNE-EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)

Shanxi Provincial Standard of the People's Republic of China, Methanol at 20 degrees

DB14/T 2013-2020 Methanol Determination of Water Quality Chromotropic Acid Spectrophotometry
DB14/T 2014-2020 Determination of Methanol in Ambient Air and Exhaust Gas Chromotropic Acid Spectrophotometry

European Committee for Standardization (CEN), Methanol at 20 degrees

EN 1252-2:2001 Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 degrees C and -20 Degrees C

Professional Standard - Aviation, Methanol at 20 degrees

HB 5220.40-1995 Method for Chemical Analysis of Superalloys Methanol Distillation-Curcumin Absorption Spectrophotometry for Determination of Boron Content
HB 5220.8-1995 Chemical Analysis Methods of Superalloys-N-Butanol-Chloroform Extraction-Absorptiometry for Determination of Phosphorus Content
HB 5220.40-2008 Methods for chemical analysis of superalloys. Part 40: Determination of boron content by methanol distillation-curcumin photometric method
HB 5220.8-2008 Methods for chemical analysis of superalloys.Part 8: Determination of phosphorus content by n-butyl alcohol-chloroform extraction photometric method

Professional Standard - Textile, Methanol at 20 degrees

FZ/T 50028-2015 Polyvinyl alcohol fiber.Test method for initial dissolve temperature

KR-KS, Methanol at 20 degrees

KS M ISO 1388-7-2017 Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content[methanol contents between 0.01 % and 0.20 %(V/V)] — Photometric method
KS B ISO 21028-2-2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
KS M ISO 91-2-2008(2023) Petroleum measurement tables－Part 2：Tables based on a reference temperature of 20℃

Group Standards of the People's Republic of China, Methanol at 20 degrees

T/FSI 053-2020 Low Viscosity RTV Methyl Silicone Rubber

UY-UNIT, Methanol at 20 degrees

UNIT 140-1960

Association Francaise de Normalisation, Methanol at 20 degrees

NF T20-711:1967 Chemical analysis of methanol. Determination of permanent acidity with phenol red.
NF P52-306-2:1993 DTU 65-20. Thermal insulation of circuits, appliances and accessories. Working temperature greater than ambient temperature. Part 2 : particular specifications.
NF E86-506-2:2001 Cryogenic vessels - Materials - Part 2 : toughness requirements for temperatures between -80 oC and -20 oC.
NF E86-506-2*NF EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2 : temperatures between -80 oC and -20 oC

TR-TSE, Methanol at 20 degrees

TS 1954-1975 LIQUEFIED PHENOL, m-CRESOL, CRESYLIC ACID AND XYLENOLS FOR INDUSTRIAL USE DETERMINATION OF DENSITY AT 20°C

SE-SIS, Methanol at 20 degrees

SIS SS 02 81 70-1983 Determination of chlorophyll a in water - Extraction with methanol - Spectrophotometric method
SIS SS-ISO 91-2:1992 Petroleum measurement tables — Part 2: Tables based on a reference temperature of 20 °C

CEN - European Committee for Standardization, Methanol at 20 degrees

EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C

AENOR, Methanol at 20 degrees

UNE 55817:1985 SURFACE ACTIVE AGENTS. ETHANOL TO BE USED AS RAW-MATERIAL IN DETERGENT FORMULATIONS. DETERMINATION OF METHANOL CONTENT (METHANOL CONTENTS BETWEEN 0,01 AND 0,20% IN VOLUMES). PHOTOMETRIC METHOD
UNE-EN 1252-2:2002 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperature between -80 oC and -20 oC.

PL-PKN, Methanol at 20 degrees

PN Z04167-02-1986 Air purity protection ests for methoxyethyl alcohol etermination of 2-methoxyethyl lcohol in work places by gas hromatography with sample nrichment
PN Z04167-01-1986 Air purity protection ests for methoxyethyl alcohol ntroduction and scope f the standard
PN Z04526-2020-12 P Air purity protection -- Determination of pentan-1-ol, 3-methylbutan-1-ol and other isomer pentanol in workplaces by gas chromatography witch flame ionization detection

CZ-CSN, Methanol at 20 degrees

CSN 64 0533-1993 Plastics. Determination of Polypropylene Solubility in P-xylene at Standard Temperature of 23 °C

未注明发布机构, Methanol at 20 degrees

BS 6392-6:1983(2011) Testing of ethanol for industrial use — Part 6 : Method for determination of methanol content [ 0.01%(V/V) to 0.20%(V/V)] (photometric method)

Danish Standards Foundation, Methanol at 20 degrees

DS/EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C

Lithuanian Standards Office , Methanol at 20 degrees

LST EN 1252-2-2002 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Methanol at 20 degrees

GJB 5895.20-2006 Test method for anti-tank missile Part 20: Temperature circulation test

Electronic Components, Assemblies and Materials Association, Methanol at 20 degrees

ECA 448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Methanol at 20 degrees

GB/T 223.75-2008 Iron,steel and alloy.Determination of boron content. Methanol distillation-curcumin photometric method
GB/T 223.75-1991 Methods for chemical analysis of iron,steel and alloy--The methanol distillation-curcumin photometric method for the determination of boron content

GM North America, Methanol at 20 degrees

GM 9985670-2010 Windshield Washer Solution, Concentrate, 99% Methanol (Issue 3)

VE-FONDONORMA, Methanol at 20 degrees

COVENIN 703-1974

API - American Petroleum Institute, Methanol at 20 degrees

API PUBL 4497-1991 Cost-Effective@ Alternative Treatment Technologies for Reducing the Concentrations of Methyl Tertiary Butyl Ether and Methanol in Groundwater

工业和信息化部, Methanol at 20 degrees

YB/T 5043-2012 Determination of molybdenum phosphorus oxide content n-butanol-chloroform extraction spectrophotometry

The American Road & Transportation Builders Association, Methanol at 20 degrees

AASHTO T309-1999 Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete Twentieth Edition

GOSTR, Methanol at 20 degrees

GOST R 8.982-2019 State system for ensuring the uniformity of measurements. Standard reference data. Titanium alloys of VT Brend. Speed of sound, relative temperature expansion, density and Young's modulus in the temperature range from 20 °С to 800 °С

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Methanol at 20 degrees

GB/T 33399-2016 Optical functional films—Polyethylene terephthalate(PET) film—Determination of thickness

Professional Standard - Ferrous Metallurgy, Methanol at 20 degrees

YB/T 5043-1993 Molybdenum Oxide Block Chemical Analysis Method n-Butanol-Chloroform Extraction Spectrophotometric Determination of Phosphorus

ECIA - Electronic Components Industry Association, Methanol at 20 degrees

EIA-448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature