ZH
RU
ES

Laboratory Environmental Control Requirements

Laboratory Environmental Control Requirements, Total:499 items.

In the international standard classification, Laboratory Environmental Control Requirements involves: Components for electrical equipment, Biology. Botany. Zoology, Air quality, Quality, Environmental protection, Analytical chemistry, Occupational safety. Industrial hygiene, Electrical and electronic testing, Electromagnetic compatibility (EMC), Aircraft and space vehicles in general, On-board equipment and instruments, Safety of machinery, Metrology and measurement in general, Test conditions and procedures in general, Industrial automation systems, Information technology (IT) in general, Laboratory medicine, Sterilization and disinfection, Electrical engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Environmental testing, Space systems and operations, Farm buildings, structures and installations, Farming and forestry, Company organization and management, Medical equipment, Shipbuilding and marine structures in general, Wastes, Applications of information technology, Protection against electric shock, Ergonomics, Medical sciences and health care facilities in general, Telecommunication systems, Vibrations, shock and vibration measurements, Acoustics and acoustic measurements, Equipment for the chemical industry, Radiation measurements, Clothes, Vocabularies, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Mechanical structures for electronic equipment.

Group Standards of the People's Republic of China, Laboratory Environmental Control Requirements

• T/GDSX 1-2022 General technical requirements for laboratory environment intelligent control system
• T/ZHAS 2-2020 Limit requirements for environmental pollution control of yacht cabins
• T/ZS 0277-2022 Basic construction requirements of ecological environment monitoring laboratory
• T/ZS 0278-2022 Guidelines for quality control and management of ecological environment monitoring laboratory
• T/CSCA 130002-2020 Digitization Laboratories: Data Control And Information Management Requirement
• T/ZSM 0003-2021 Requirements for remote intelligent control shelter metrology laboratory
• T/SZUAVIA 009.1-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 1: General technical requirements
• T/GAGA 005-2021 Virtual reality products---Environmental adaptability requirements and test methods
• T/CMES 00001-2017 Requirements for the environmental construction of experimental training teaching bases for mechanical majors in colleges and universities
• T/GACT 0001-2020 Technical Regulation?for Clean Environment of Workshop for Medical Protective Face Mask

Guangdong Provincial Standard of the People's Republic of China, Laboratory Environmental Control Requirements

• DB4403/T 336-2023 DNA synthesis laboratory environment and safety requirements

Henan Provincial Standard of the People's Republic of China, Laboratory Environmental Control Requirements

• DB4102/T 007-2020 Laboratory facilities and environmental conditions management requirements
• DB4117/T 321-2021 Guidelines for Environmental Control of Animal Pathogenic Microbiology Laboratory

American National Standards Institute （ANSI), Laboratory Environmental Control Requirements

• ANSI/TNI EL-V2-2009 General Requirements for Accreditation Bodies Accrediting Environmental Laboratories
• ANSI/TNI EL-V1-2009 Management and Technical Requirements for Laboratories Performing Environmental Analyses
• ANSI T1.304-1997 Telecommunications - Ambient temperature and humidity requirements for network equipment in controlled environments
• ANSI/IEST/ISO 14644-3:2005 Cleanrooms and associated controlled environments - Part 3: Test methods
• ANSI/ISA 61010-1(82.02.01)-2012 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General requirements
• ANSI/IEST/ISO 14644-2:2000 Cleanrooms and associated controlled environments--Part 2: Specifications for testing and monitoring to prove continued compliance with IEST/ISO 14644-1:1999
• ANSI/ISA 61010-2-030(82.02.03)-2012 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Laboratory Environmental Control Requirements

• GB/T 38080-2019 Technical requirements for safety environment and occupational health in mobile laboratory
• GB 4793.7-2008 Safety requirements for electrical equipment for measurement,control,and labortory use.Part 7:Particular requirements for laboratory centrifuges
• GB 4793.7-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for alboratory centrifuges
• GB 14925-2010(英文版) Laboratory animals—Requirements of environment and housing facilities
• GB 4793.6-2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 6: Particular requirements for laboratory material heating equipment
• GB/T 18268-2000 Electrical equipment for measurement,control and laboratory use--EMC requirements
• GB 4793.6-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials
• GB 4793.3-2008 Safety requirements for electrical equipment for measurement,control,and laboratory use.Part3:Particular requirements for laboratory equipment for mixing and stirring
• GB 4793.1-2007 Safety requirements for electrical equipment for measurement,control,and laboratory use.Part 1:General requirements
• GB 4793.3-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for mixing and stirring
• GB/T 18268.1-2010 Electrical equipment for measurement,control and laboratory use.EMC requirements.Part 1:General requirements
• GB/T 42125.19-2022 Safety requirements for electrical equipment for measurement, control and laboratory use—Part 19: Particular requirements for electrically operated valve actuators
• GB 4793.4-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process
• GB/T 36372-2018 Cleanrooms and associated controlled environments.General technical requirements of combined envelope structure
• GB/T 42125.14-2023 Safety requirements for electrical equipment for measurement, control and laboratory use—Part 14:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other pu
• GB 4793.9-2013 Safety requirements for electrical equipment for measurement, control and laboratory use.Part 9:Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• GB/Z 30993-2014 Safety requirements for electrical equipment for measurement, control and laboratory use.Conformity verification report for GB 4793.1—2007

British Standards Institution (BSI), Laboratory Environmental Control Requirements

• BS EN IEC 61010-2-012:2022+A11:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for climatic and environmental testing and other temperature conditioning equipment
• BS EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for laboratory centrifuges
• BS EN ISO 14644-3:2005 Cleanrooms and associated controlled environments - Test methods
• BS EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for control equipment
• BS EN 61010-1:1993 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements
• 20/30368425 DC BS EN ISO 14065. Greenhouse gases. Environmental information. Requirements for bodies validating and verifying environmental information
• BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for climatic and environmental testing and other temperature conditioning equipment
• BS EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of Materials
• BS EN 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for in vitro diagnostic (IVD) medical equipment
• BS EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material
• BS EN IEC 61010-2-051:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
• BS EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
• BS EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - General requirements
• BS EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
• BS EN 61010-2-020:2017 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges
• BS EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
• BS EN 61326-2-6:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - Particular requirements - In vitro diagnostic (IVD) medical equipment
• BS EN IEC 61326-1:2021 Electrical equipment for measurement, control and laboratory use. EMC requirements - General requirements
• BS EN IEC 61010-2-011:2021+A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for refrigerating equipment
• BS EN IEC 61010-2-061:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• BS ISO 14066:2023 Environmental information. Competence requirements for teams validating and verifying environmental information
• BS EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
• BS EN IEC 61010-2-201:2018 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for control equipment
• BS EN 61010-2-045:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
• BS EN 61326:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements
• BS EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for refrigerating equipment
• BS EN ISO 11064-6:2005 Ergonomic design of control centres - Environmental requirements for control centres
• BS EN 61010-2-010:1993 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
• BS EN 61010-1:2010+A1:2019 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
• BS EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• BS EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• BS IEC 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
• 20/30419178 DC BS EN 61010-2-051 AMD1. Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
• 20/30387385 DC BS EN IEC 61010-2-020. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
• BS EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use – EMC requirements Part 1: General requirements
• BS EN IEC 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment
• 19/30394199 DC BS EN 61010-2-201. Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201. Particular requirements for control equipment
• BS EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• BS EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
• BS EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• BS IEC 61010-3-051:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-051, particular requirements for laboratory equipment for mixing and stirring
• BS EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• BS EN IEC 61010-2-091:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for cabinet X-ray systems
• BS EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for testing and measuring circuits
• BS EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for cabinet x-ray systems
• BS EN IEC 61010-2-202:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for electrically operated valve actuators
• 22/30446063 DC BS EN 61010-1 AMD2. Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1. General requirements
• BS EN IEC 61010-2-040:2021 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for electrically operated valve actuators
• BS IEC 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
• BS EN IEC 61010-2-101:2022+A11:2022 Safety requirements for electrical equipment for measurement, control, and laboratory use - Safety requirements for in vitro diagnostic (IVD) medical equipment
• BS EN 61010-2-202:2017 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for electrically operated valve actuators
• 18/30374797 DC BS EN 61326-1. Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 1. General requirements
• BS EN IEC 61010-2-061:2021 Tracked Changes. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• PD IEC TR 61010-3-042:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-042:1997, particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materia
• 18/30387971 DC BS EN IEC 61326-1. Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 1. General requirements
• BS EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular safety requirements for machinery aspects of equipment
• BS EN 61969-3:2012 Mechanical structures for electronic equipment. Outdoor enclosures. Environmental requirements, tests and safety aspects
• BS IEC 61010-3-061:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-061, particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• BS EN 61326-2-6:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment

Military Standard of the People's Republic of China-General Armament Department, Laboratory Environmental Control Requirements

• GJB 150.1A-2009 Laboratory environmental test methods for military materiel.Part 1:General requirements
• GJB 624.15-1988 Military aircraft scientific research flight test training requires aircraft environment control system
• GJB 4011-2000 Medical requirements for engineering design of atmospheric environment control for spacecraft crew cabin

International Electrotechnical Commission (IEC), Laboratory Environmental Control Requirements

• IEC 61326:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements
• IEC 61010-2-020:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• IEC 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• IEC 61010-2-020:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-020: particular requirements for laboratory centrifuges
• IEC 61010-2-020:2016 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• IEC 61326-1:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements
• IEC 61010-2-012:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditionin
• IEC 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditionin
• IEC 61010-2-012:2019 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditionin
• IEC 61326:1997 Electrical equipment for measurement, control and laboratory use - EMC requirements
• IEC 61326:2002 Electrical equipment for measurement, control and laboratory use - EMC requirements
• IEC 61326/COR1:2002 Electrical equipment for measurement, control and laboratory use - EMC requirements
• IEC 61010-2-201:2017 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• IEC 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• IEC 61010-2-101:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
• IEC 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
• IEC 61010-2-101:2018 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
• IEC 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• IEC 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• IEC 61010-2-051:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• IEC 61010-2-010:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• IEC 61010-2-201:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• IEC 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• IEC 61010-1:2001 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC 61010-1/COR1:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC 61010-1/COR2:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC 61010-1:1990 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 1: general requirements
• IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• IEC 61010-2-051:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• IEC 61010-2-051:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• IEC 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• IEC 61010-2-010:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• IEC 61010-2-045:2000 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
• IEC 61326/AMD1:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements; Amendment 1
• IEC 61010-1:2010/COR1:2011 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC 61010-1:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC 61326-1:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
• IEC 61326-1:2005 Electrical equipment for measurement, control and laboratory use, control and laboratory use - EMC requirements - Part 1: General requirements
• IEC 61326-1:2020 RLV Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
• IEC 61326-2-6:2005 Electrical equipment for measurement, control and laboratory use, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In-vitro diagnostic (IVD) medical equipment
• IEC 61326-2-6:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
• IEC 61010-2-011:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
• IEC 61010-2-011:2019 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
• IEC 61326-1:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
• IEC 61010-2-010:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-010: particular requirements for laboratory equipment for the heating of materials
• IEC TR 61010-3-020:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements for laboratory centrifuges
• IEC 61010-2-041:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
• IEC 61010-2-061:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionizati
• IEC 61010-1/AMD2:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements; Amendment 2
• IEC 61326-1/AMD1:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements; Amendment 1
• IEC 61010-1:2010/COR2:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements; Corrigendum 2
• IEC 61010-1:2010/AMD1:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements; Amendment 1
• IEC 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• IEC 61010-2-081:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• IEC 61010-2-081:2001/AMD1:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
• IEC 61010-2-081:2009 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• IEC 61010-2-081:2001+AMD1:2003 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and o
• IEC 61010-2-081:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and ot
• IEC 61010-2-30:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits
• IEC 61326-1/AMD2:2000 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements; Amendment 2
• IEC 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• IEC 61010-2-061:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• IEC 61010-2-061:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• IEC 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• IEC 61010-2-061:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• IEC 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits
• IEC 61010-2-011:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
• IEC 61326-1/COR1:2008 Electrical equipment for measurement, control and laboratory use, control and laboratory use - EMC requirements - Part 1: General requirements; Corrigendum 1
• IEC 61010-2-081/AMD1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes; Amendment 1
• IEC 61010-1:2010/ISH1:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements - Interpretation sheet to clause 6.8.3.1
• IEC 61010-2-091:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
• IEC 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems
• IEC 61010-2-091:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems
• IEC 61010-2-202:2020 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
• IEC 61010-2-202:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators

Association of German Mechanical Engineers, Laboratory Environmental Control Requirements

• VDI 4221 Blatt 1-2015 Quality assurance - Requirements on interlaboratory tests in immission control - Requirements on providers of interlaboratory tests
• VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions

Professional Standard - Aviation, Laboratory Environmental Control Requirements

• HB 8444-2014 Requirements for flight test of civil aircraft environmental control system
• HB 8486-2014 General requirements for environmental control system test of civil aircraft
• HB 6751-1993 General test requirements for military aircraft environmental control system
• HB 7489-2014 General requirements for environmental control system of civil aircraft
• HB 7489-1997 General requirements for civil aircraft environmental control systems
• HB 8485-2014 Requirements for fault isolation in environmental control system of civil aircraft
• HB 7229-1995 Acoustic Design Requirements for Civil Aircraft Environmental Control System
• HB 7504.9-1997 Data Requirements for Flight Simulator Design and Performance Environmental Control Systems

GB-REG, Laboratory Environmental Control Requirements

• REG NASA-LLIS-3157-2010 Lessons Learned - Environmental Control System (ECS) Purge Support Requirements
• REG NASA-LLIS-0084-1992 Lessons Learned - Environmental Control System (ECS) Purge of Orbiter Compartments
• REG NASA-LLIS-1494--2005 Lessons Learned - Natural Environment Design Requirements for a Program: Control and Single Focus Contact

BELST, Laboratory Environmental Control Requirements

• STB 17.13.05-42-2015 Еnvironmental pгоtесtion. Analitical (laboratory) control and monitoring of the environment. Water quality. Determination of sulfat-ions concentration by turbidimetric metod
• STB 17.13.05-39-2015 Еnvironmental pгоtесtion аnd nature use. Analytic (laboratory) control and monitoring of the environment. Water quality. Determination of the concentration of chlorides by titration method with silver nitrate
• STB 17.13.05-43-2015 Еnvironmental pгоtесtion and nature use. Analytic (laboratory) control and monitoring of the environment. Water quality. Determination of the concentration of nitrogen of nitrates by photometric method with salicylic acid

ISA - International Society of Automation, Laboratory Environmental Control Requirements

• ISA 82.02.02-1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use
• ISA 82.02.04-1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use
• ISA 61010-1-2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT@ CONTROL@ AND LABORATORY USE – Part 1: General requirements (82.02.01)
• ISA 61010-1-2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT@ CONTROL@ AND LABORATORY USE - Part 1: General requirements (82.02.01)

Liaoning Provincial Standard of the People's Republic of China, Laboratory Environmental Control Requirements

• DB21/T 1985-2012 Technical requirements for temperature and humidity control systems for mobile laboratories

TH-TISI, Laboratory Environmental Control Requirements

• TIS 2003-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-020: particular requirements for laboratory centrifuges
• TIS 2002-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-010: particular requirements for laboratory equipment for the heating of materials
• TIS 2009-2000 Safety requirement for electrical equipment for measurement, control and laboratory use.part 2: particular requirements for laboratory equipment for mixing and stirring
• TIS 2001-2000 Safety requirements for electrical equipment for measurement, control, and laboratory use.part 1: general requirements
• TIS 2006-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-041: particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
• TIS 2010-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-061: particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

Association Francaise de Normalisation, Laboratory Environmental Control Requirements

• NF C42-721:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges.
• NF C42-020-2-020*NF EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : particular requirements for laboratory centrifuges
• NF EN IEC 61326-1:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 1 : exigences générales
• NF S90-351:2003 Health care establishments - Cleanrooms and associated controlled environments - Requirements for the control of airbone contamination.
• NF C46-050-1*NF EN IEC 61326-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : general requirements
• NF C42-020-2-010*NF EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
• NF C42-020-2-012*NF EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012 : particular requirements for climatic and environmental testing and other temperature conditioning equipment
• NF C42-720:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of material.
• NF C42-020-2-010*NF EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
• NF C42-020-2-051/A11*NF EN IEC 61010-2-051/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
• NF C42-020-2-051*NF EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
• NF C42-020-2-051*NF EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring
• NF X44-103:2006 Cleanrooms and associated controlled environments - Part 3 : test methods.
• NF C42-020-2-201*NF EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201 : particular requirements for control equipment
• NF C42-020-2-201*NF EN IEC 61010-2-201:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201 : particular requirements for control equipment
• NF C42-020-1*NF EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1 : general requirements
• NF C42-020:1993 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1 : general requirements.
• NF C42-020-1/A1*NF EN 61010-1/A1:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1 : general requirements
• NF C42-722:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051 : particular requirements for laboratory equipment for mixing and stirring.
• NF C46-050/A3:2004 Electrical equipment for measurement, control and laboratory use - EMC requirements.
• NF S90-351:2013 Health care institutions - Controlled environment areas - Requirements for airborne contamination control
• NF C46-050-2-6:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : particular requirements - In-vitro diagnostic (IVD) medical equipment.
• NF C42-020-2-011*NF EN IEC 61010-2-011:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011 : particular requirements for refrigerating equipment
• NF C46-050-1*NF EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : general requirements
• NF C42-730:2006 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization.
• NF C42-020-2-061/A11*NF EN IEC 61010-2-061/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• NF C42-020-2-061*NF EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• NF C42-020-2-011/A11*NF EN IEC 61010-2-011/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011 : particular requirements for refriger
• NF X35-400-6*NF EN ISO 11064-6:2005 Ergonomic design of control centres - Part 6 : environmental requirements for control centres
• NF EN ISO 11064-6:2005 Conception ergonomique des centres de commande - Partie 6 : exigences relatives à l'environnement pour les centres de commande
• NF EN IEC 61010-2-201:2018 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-201 : exigences particulières pour les équipements de commande
• NF C42-736/A1:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes.
• NF C42-020-2-061*NF EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061 : particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• NF C42-020-2-011*NF EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011 : particular requirements for refrigerated equipment
• NF C42-020-2-081*NF EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• NF C42-020-2-081*NF EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• NF EN ISO 14065:2021 Principes généraux et exigences pour les organismes de validation et de vérification de l'information environnementale
• NF EN IEC 61326-2-6:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-6 : exigences particulières - Matériel médical de diagnostic in vitro (IVD)
• NF C46-050-2-6*NF EN IEC 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : particular requirements - In vitro diagnostic (IVD) medical equipment
• NF C42-020-2-030*NF EN 61010-2-030:2011 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030 : particular requirements for testing and measuring circuits
• NF C46-050-2-6*NF EN 61326-2-6:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : particular requirements - In vitro diagnostic (IVD) medical equipment

European Committee for Electrotechnical Standardization（CENELEC）, Laboratory Environmental Control Requirements

• EN 61010-2-020:2006 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges
• EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
• EN IEC 61010-2-201:2018 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-201: Particular requirements for control equipment
• prEN IEC 61010-2-201:2020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement@ control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
• EN IEC 61010-2-012:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
• EN 61010-2-101:2017 Safety requirements for electrical equipment for measurement@ control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
• EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• EN 61010-1:1993 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 1: General Requirements (Incorporates Amendment A2: 1995; Remains Current)
• EN 61010-1:2010/A1:2019/AC:2019-04 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• EN IEC 61326-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
• EN 61326-2-6:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
• EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
• EN IEC 61010-2-011:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
• EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
• EN 61326-2-6:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (Remains Current)
• EN 61010-2-101:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
• EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Remains Current)
• EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (Incorporating corrigendum September 2013)
• EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits
• EN 61010-1:2010/A1:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements (Incorporating corrigenda February 2008 and February 2010; Remains Current)
• EN IEC 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
• EN 61010-2-202:2017 Safety requirements for electrical equipment for measurement@ control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
• EN IEC 61010-2-202:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators

CENELEC - European Committee for Electrotechnical Standardization, Laboratory Environmental Control Requirements

• EN 61010-2-020:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges
• EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement@ control@ and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of material
• EN 61010-1:2001 Safety requirements for electrical equipment for measurement@ control@ and laboratory use Part 1: General requirements (Incorporating Corrigendum June 2002)
• EN 61010-2-051:1995 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-051: Particular Requirements for Laboratory Equipment for Mechanical Mixing and Stirring
• EN 61326-1:1997 Electrical Equipment for Measurement@ Control and Laboratory Use EMC Requirements Part 1: General Requirements
• EN 61010-2-045:2000 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-045: Particular Requirements for Washer Disinfectors Used in Medical@ Pharmaceutical@ Veterinary and Laboratory Fields
• EN 61010-2-061:1996 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization
• EN 61010-2-010:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Incorporates Amendment A1: 1996)

Danish Standards Foundation, Laboratory Environmental Control Requirements

• DS/EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
• DS/EN 61326-1:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
• DS/EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
• DS/EN IEC 61326-1:2021 Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements
• DS/EN 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• DS/EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
• DS/EN 61010-2-201/AC:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
• DS/EN 61010-2-051:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• DS/EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• DS/EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• DS/EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• DS/IEC/TR 61010-3-020:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-020: Conformity verification report for IEC 61010-2-020:1992, Particular requirements for laboratory centrifuges
• DS/EN ISO 11064-6:2005 Ergonomic design of control centres – Part 6: Environmental requirements for control centres
• DS/IEC/TR 61010-3-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials
• DS/EN 61010-2-061:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• DS/IEC/TR 61010-3-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-051: Conformity verification report for IEC 61010-2-051, Particular requirements for laboratory equipment for mixing and stirring
• DS/EN 61010-2-081/A1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• DS/IEC/TR 61010-3-081:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• DS/EN IEC 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment
• DS/EN IEC 61010-2-202:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-202: Particular requirements for electrically operated valve actuators
• DS/EN IEC 61010-2-091:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet X-ray systems
• DS/EN 61010-2-030:2011 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits
• DS/EN 61010-2-091/AC:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems
• DS/EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet x-ray systems

Korean Agency for Technology and Standards (KATS), Laboratory Environmental Control Requirements

• KS C IEC 61010-2-020:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
• KS C IEC 61010-2-051:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• KS C IEC 61010-2-10:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-10:Particular requirements for laboratory equipment for the heating of materials
• KS C IEC 61010-2-10:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-10: Particular requirements for laboratory equipment for the heating of materials
• KS I ISO 14644-3:2006 Cleanrooms and associated controlled environments-Part 3:Test methods
• KS C IEC 61010-2-20:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-20:Particular requirements for laboratory centrifuges
• KS C IEC 61010-2-20:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
• KS C IEC 61010-1:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 1:General requirements
• KS C IEC 61010-1:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
• KS C IEC 61010-2-51:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-51:Particular requirements for laboratory equipment for mixing and stirring
• KS C IEC 61010-2-51:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-51: Particular requirements for laboratory equipment for mixing and stirring
• KS C IEC 61010-2-010:2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• KS C IEC 61010-1:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
• KS C IEC 61326-1-2008(2018) Electrical equipment for measurement, control and laboratory use－EMC requirements－Part 1：General requirements
• KS C IEC 61326-1:2008 Electrical equipment for measurement, control and laboratory use-EMC requirements-Part 1:General requirements
• KS C IEC 61010-2-41-2002(2018) Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－41：Particular requirements for autoclaves using steam for the treatment of medicals, and for laboratory
• KS C IEC 61010-2-061:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionizat
• KS C IEC 61010-2-42:2002 Safety requipements for electrical equipment for measurement, control, and laboratory use-Part 2-42:Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials and for laboratory processes
• KS C IEC 61010-2-42:2015 Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－42：Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials and for laboratory processes
• KS P ISO TR 18112:2009 Clinical laboratory testing and in vitro diagnostic test systems-In vitro diagnostic medical devices for professional use-Summary of regulatory requirements for information supplied by the manufacturer

RU-GOST R, Laboratory Environmental Control Requirements

• GOST IEC 61010-2-020-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
• GOST IEC 61010-2-020-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
• GOST R IEC 61326-1-2014 Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 1. General requirements
• GOST R 54082-2010 Requirements for performance of chambers for industrial products environmental endurance tests. Data processing methods for chamber certification (calibration)
• GOST IEC 61010-2-010-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
• GOST 12.2.091-2012 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
• GOST 12.2.091-1994 Safetty requirements for indicating and recording electricalmeasuring instruments and their acessories
• GOST IEC 61010-2-010-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
• GOST R 55001-2012 General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests
• GOST IEC 61010-2-051-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
• GOST IEC 61010-2-051-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
• GOST R IEC 61010-2-020-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
• GOST R 54083-2010 General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for temperature resistance test
• GOST R IEC 61010-2-010-1999 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
• GOST IEC 61010-2-061-2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometer with thermal atomization and ionization
• GOST IEC 61010-2-030-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-030. Particular requirements for testing and measuring circuits
• GOST R ISO 11064-6-2013 Ergonomic design of control centers. Part 6. Environmental requirements
• GOST R ISO 11064-6-2016 Ergonomic design of control centers. Part 6. Environmental requirements
• GOST IEC 61010-2-081-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-081. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• GOST R IEC 61010-2-051-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
• GOST IEC 61010-2-061-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

KR-KS, Laboratory Environmental Control Requirements

• KS C IEC 61010-2-020-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges
• KS C IEC 61010-2-051-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• KS C IEC 61010-2-010-2018(2023) Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• KS C IEC 61010-1-2018(2023) Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
• KS C IEC 61010-2-010-2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• KS C IEC 61010-1-2018 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements
• KS C IEC 61010-2-41-2002(2023) Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－41：Particular requirements for autoclaves using steam for the treatment of medicals, and for laboratory
• KS C IEC 61010-2-061-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionizat

ES-UNE, Laboratory Environmental Control Requirements

• UNE-EN 61010-2-020:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Endorsed by Asociación Española de Normalización in June of 2017.)
• UNE-EN IEC 61326-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (Endorsed by Asociación Española de Normalización in July of 2021.)
• UNE-EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (Endorsed by AENOR in March of 2013.)
• UNE-EN IEC 61010-2-201:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by Asociación Española de Normalización in August of 2018.)
• UNE-EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by AENOR in July of 2013.)
• UNE-EN IEC 61010-2-012:2022/A11:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment (Endorsed by Asociación Española de Nor...
• UNE-EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment (Endorsed by Asociación Española de Nor...
• UNE-EN IEC 61010-2-012:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment (Endorsed by Asociación Española de Nor...
• UNE-EN IEC 61010-2-051:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
• UNE-EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by Asociación Española de Normalización in October of 2021.)
• UNE-EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Endorsed by AENOR in June of 2015.)
• UNE-EN 61010-1:2011/A1:2020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• UNE-EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by Asociación Española de Normalizaci...
• UNE-EN IEC 61010-2-061:2021/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by Asociación Española de Normalizaci...
• UNE-EN IEC 61010-2-011:2021/A11:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment (Endorsed by Asociación Española de Normalización in December of 2021.)
• UNE-EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (Endorsed by Asociación Española de N...
• UNE-EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Endorsed by AENOR in June of 2015.)
• UNE-EN IEC 61010-2-011:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment (Endorsed by Asociación Española de Normalización in December of 2021.)
• UNE-EN ISO 14065:2021 General principles and requirements for bodies validating and verifying environmental information (ISO 14065:2020)
• UNE-EN 61326-2-6:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (Endorsed by AENOR in June of 2013.)

United States Navy, Laboratory Environmental Control Requirements

• NAVY MIL-E-18927 E (2)-1986 ENVIRONMENTAL CONTROL SYSTEMS, AIRCRAFT, GENERAL REQUIREMENTS FOR
• NAVY MIL-E-18927 E-1983 ENVIRONMENTAL CONTROL SYSTEMS, AIRCRAFT, GENERAL REQUIREMENTS FOR

石家庄市市场监督管理局, Laboratory Environmental Control Requirements

• DB1301/T 420-2022 Solar greenhouse environmental control technology requirements for autumn and winter tomatoes
• DB1301/T 419-2022 Technical requirements for installation and deployment of solar greenhouse environmental control equipment

ZA-SANS, Laboratory Environmental Control Requirements

• SANS 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-020: Particular requirements for laboratory centrifuges
• SANS 61326:2003 Electrical equipment for measurement, control and laboratory use - EMC requirements
• SANS 61010-2-010:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• SANS 61010-2-101:2003 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment
• SANS 61326-1:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements
• SANS 61010-1:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements
• SANS 61010-2-032:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

Lithuanian Standards Office , Laboratory Environmental Control Requirements

• LST EN 61326-1-2013 Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
• LST EN 61010-2-020-2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)
• LST EN 61326-1-2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2005)
• LST EN IEC 61326-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2020)
• LST EN 61010-2-010-2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014)
• LST EN 61010-2-010-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010: Particular requirements for laboratory equipment for the heating of material (IEC 61010-2-010:2003)
• LST EN 61010-2-051-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003)
• LST EN 61010-1-2011 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements (IEC 61010-1:2010)
• LST EN 61326-2-4-2013 Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and
• LST EN ISO 11064-6:2005 Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005)
• LST EN 61010-2-091-2012/AC-2013 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-091: Particular requirements for cabinet X-ray systems
• LST EN IEC 61010-2-091/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems

Standard Association of Australia （SAA）, Laboratory Environmental Control Requirements

• IEC 61326-1:2012 RLV Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 1: General requirements
• AS/NZS 14644.2:2002 Cleanrooms and associated controlled enviornments - Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000, MOD)

Japanese Industrial Standards Committee (JISC), Laboratory Environmental Control Requirements

• JIS C 61326-1:2022 Electrical equipment for measurement, control and laboratory use -- EMC requirements -- Part 1: General requirements
• JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use
• JIS C 1010-2-201:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-201: Particular requirements for control equipment
• JIS C 1010-2-201:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-201: Particular requirements for control equipment
• JIS C 1010-1:2005 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements
• JIS C 1010-1:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use.Part 1: General requirements
• JIS C 1010-1:2019 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements
• JIS C 1806-1:2001 Electrical equipment for measurement, control and laboratory use -- EMC requirements
• JIS C 1806-1:2010 Electrical equipment for measurement, control and laboratory use -- EMC requirements -- Part 1: General requirements
• JIS C 61326-1:2017 Electrical equipment for measurement, control and laboratory use -- EMC requirements-Part 1: General requirements
• JIS Z 8503-6:2007 Ergonomic design of control centres -- Part 6: Environmental requirements for control centres
• JIS C 61326-2-6:2023 Electrical equipment for measurement, control and laboratory use -- EMC requirements -- Part 2-6: Particular requirements -- In vitro diagnostic (IVD) medical equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Laboratory Environmental Control Requirements

• GB/T 35428-2017 Requirements of environmental control for hospital negative pressure isolation ward
• GB/T 34791-2017 Laboratory animal－Requirement for quality control

Canadian Standards Association (CSA), Laboratory Environmental Control Requirements

• CAN/CSA-C22.2 NO.61010-2-020-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (Second Edition)
• CSA C22.2 No.61010-2-020-09-CAN/CSA-2009 Safety requirements for electrical equipment for measurement, control, and laboratory use ?Part 2-020: Particular requirements for laboratory centrifuges Second Edition
• CAN/CSA-IEC 61010-2-201:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (First Edition)
• CSA C22.2 No.61010-1-04 UPD 1-2008 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use ?Part 1: General Requirements Second Edition
• CAN/CSA-C22.2 NO.61010-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields (First Edition)
• CSA C22.2 No.1010.2.020-94-1994 Regles De Securite Pour Appareils Electriques De Mesurage, De Regulation Et De Laboratoire - Partie 2-020: Prescriptions Particulieres Pour Centrifugeuses De Laboratoire Premiere Edition; Modification 1: 1997; Fiche No 1
• CSA C22.2 No.61010-2-051-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring Second Edition
• CSA C22.2 No.61010-2-010-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials Second Edition
• CSA C22.2 No.1010.2.041-96-1996 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-041: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials, and for Laboratory Processes First Edition
• CSA C22.2 No.61010-031-07-CAN/CSA-2007 R鑗les de s閏urit?pour appareils 閘ectriques de mesurage, de r間ulation et de laboratoire ?Partie 031 : Prescriptions de s閏urit?pour sondes 閝uip閑s tenues ?la main pour mesurage et essais 閘ectriques premi鑢e 閐ition [Superseded: CSA C22.2 NO 1010.2.03
• CAN/CSA-C22.2 NO.61010-2-061-2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Third Edition)
• CAN/CSA-C22.2 NO.61010-2-2012 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-030: Particular requirements for testing and measuring circuits
• CSA C22.2 No.61010-2-045-04-2004 R鑗les de s閏urit?pour appareils 閘ectriques de mesurage, de r間ulation et de laboratoire Partie 2-045: Prescriptions particuli鑢es pour appareils de d閟infection/lavage utilis閟 dans les domaines m閐ical, pharmaceutique, v閠閞inaire et en laboratoire

AENOR, Laboratory Environmental Control Requirements

• UNE-EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
• UNE-EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
• UNE-EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006)
• UNE-EN 61010-2-061:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
• UNE-EN 61010-2-011:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
• UNE-EN 61010-2-081:2003 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• UNE-EN 61010-2-081/A1:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
• UNE-EN ISO 11064-6:2006 Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005)
• UNE-EN 61010-2-030:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-030: Particular requirements for testing and measuring circuits

International Organization for Standardization (ISO), Laboratory Environmental Control Requirements

• ISO 14066:2023 Environmental information — Competence requirements for teams validating and verifying environmental information
• ISO/FDIS 14066 Environmental information — Competence requirements for teams validating and verifying environmental information
• ISO 14644-3:2005 Cleanrooms and associated controlled environments - Part 3: Test methods
• ISO 14065:2020 General principles and requirements for bodies validating and verifying environmental information
• ISO 11064-6:2005 Ergonomic design of control centres - Part 6: Environmental requirements for control centres

Professional Standard - Commodity Inspection, Laboratory Environmental Control Requirements

• SN/T 3451-2012 Technical specifications of quality control for diagnostic reagents in plant quarantine laboratory
• SN/T 2776-2011 Management requirements for medical vector biological testing laboratories at frontier ports
• SN/T 2024-2007 Requirements for biosafety levels for entry and exit animal quarantine laboratories

American Society for Testing and Materials (ASTM), Laboratory Environmental Control Requirements

• ASTM D5829-96 Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories
• ASTM D5829-96(2007) Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories
• ASTM D5829-96(2001) Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories
• ASTM E1549-06 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations

German Institute for Standardization, Laboratory Environmental Control Requirements

• DIN 12851:1974 Laboratory porcelain; requirements, methods of test
• DIN EN 61010-2-010:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:2003); German version EN 61010-2-010:2003
• DIN EN 61010-2-051:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2003); German version EN 61010-2-051:2003
• DIN EN 61010-2-020:2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006); German version EN 61010-2-020:2006
• DIN 45688:2005 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
• DIN 45688:2014 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
• DIN EN ISO 11064-6:2005 Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005); English version of DIN EN ISO 11064-6
• DIN 45688:2014-07 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
• DIN EN 61010-2-081:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001 + A1:2003); German v
• DIN EN ISO 11064-6:2005-10 Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005); German version EN ISO 11064-6:2005
• DIN EN 61010-2-061:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:2003); German version EN 61010-2-06

Shanghai Provincial Standard of the People's Republic of China, Laboratory Environmental Control Requirements

• DB31/T 810-2014 Environmental control requirements for the production process of remanufactured printing consumables

国家质量监督检验检疫总局, Laboratory Environmental Control Requirements

• SN/T 4754-2017 Technical requirements for chemical testing proficiency verification in entry-exit laboratories
• SN/T 4617-2016 Technical specifications for quality control of border port health and quarantine laboratories
• SN/T 2024-2017 Technical requirements for biosafety classification of entry-exit animal quarantine laboratories
• SN/T 4610-2016 Requirements for building testing capacity of health and quarantine laboratories for entry-exit special items

Underwriters Laboratories (UL), Laboratory Environmental Control Requirements

• UL 61010-2-201-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• UL 61010-1-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• UL 61010-2-051 BULLETIN-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring
• UL 61010-1-2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• UL 61010-2-012-2017 UL Standard for Safety Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment
• UL 61010-2-010-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Third Edition)
• UL 61010-2-051-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Third Edition)
• UL 61010-2-051-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Fourth Edition)
• UL 61010-2-010-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Fourth Edition)
• UL 61010-2-201-2018 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-201: Particular Requirements for Control Equipment (Second Edition)
• UL 61010-2-030-2012 UL Standard for Safety Safety requirements for electrical equipment for measurement@ control@ and laboratory use �C Part 2-030: Particular requirements for testing and measuring circuits (First Edition; Reprint with revisions through and including Septemb
• UL 61010-2-201 (ND)-2018 National Differences For UL 61010-2-201 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-201: Particular Requirements for Control Equipment (Second Edition)
• UL 61010-1 (ND)-2012 National Differences For UL 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements (Edition 3; Reprint with revisions through and including July 15, 2015)

BE-NBN, Laboratory Environmental Control Requirements

• NBN-EN 61010-1-1994 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements

European Committee for Standardization (CEN), Laboratory Environmental Control Requirements

• prEN 61010-1-1992 Safety requirements for electrical equipment for measurement, control and laboratory use; part 1: general requirements (IEC 1010-1:1990 + future A1, modified)
• EN 60010-2-02:1994 Safety requirements for electrical equipment for measurement, control and laboratory use Part u320 Particular rqyirernents for laboratory centrifuges (includes amendment Al : 1996)
• EN ISO 11064-6:2005 Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005)

Instrument Society of America (ISA), Laboratory Environmental Control Requirements

• ISA 82.02.01-2004 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use ?Part 1: General Requirements Approved 12 July 2004 ANSI/ISA?1010-1 (82.02.01) CSA C22.2 No. 1010.1 ANSI/UL 61010-1 AMERICAN NATIONAL STANDARD ISA The Instrumentati

PL-PKN, Laboratory Environmental Control Requirements

• PN-EN 61010-1-2011/A1-2019-04 P Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements
• PN-EN IEC 61326-1-2021-10 E Electrical equipment for measurement, control and laboratory use -- EMC requirements -- Part 1: General requirements (IEC 61326-1:2020)
• PN-EN IEC 61326-2-4-2021-11 E Electrical equipment for measurement, control and laboratory use -- EMC requirements -- Part 2-4: Particular requirements -- Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 an

GOSTR, Laboratory Environmental Control Requirements

• GOST IEC 61010-1-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
• GOST 12.2.091-2002 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

ES-AENOR, Laboratory Environmental Control Requirements

• UNE 53-003-1985

Gansu Provincial Standard of the People's Republic of China, Laboratory Environmental Control Requirements

• DB62/T 4076-2019 Requirements for the breeding environment and facilities of cooperative miniature pigs used in experiments

American Industrial Hygiene Association （AIHA), Laboratory Environmental Control Requirements

• ASSE 1035-2002 Performance Requirements for Laboratory Faucet Backflow Preventers

AT-OVE/ON, Laboratory Environmental Control Requirements

• OVE EN 61010-2-051/AA-2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Amendment) (english version)

PT-IPQ, Laboratory Environmental Control Requirements

• NP EN 61326/A1-2001 Electrical equipment for measurement, control and laboratory use EMC requirements (IEC61326:1997/A1:1998)

IEC - International Electrotechnical Commission, Laboratory Environmental Control Requirements

• IEC TR 61010-3-010:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010@ Particular Requirements for Laboratory Equipment for the Heating of Materials (Edition 1.0)
• IEC TR 61010-3-051:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051@ Particular Requirements for Laboratory Equipment for Mixing and Stirring (Edition 1.0)

Professional Standard - Environmental Protection, Laboratory Environmental Control Requirements

• HJ/T 321-2006 Specifications for environmental protection product.Low-voltage control power supply for electrostatic precipitator

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Laboratory Environmental Control Requirements

• IEEE 789-1988 Standard Performance Requirements for Communications and Control Cables for Application in High Voltage Environments
• IEEE 789-2013 Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments

未注明发布机构, Laboratory Environmental Control Requirements

• BS EN 61010-2-041:1997 Safetyrequirementsfor electrical equipment for measurement, control, and laboratory use — Part 2 - 041 : Particular requirements for autoclaves using steam for the treatment ofmedical materials, and for laboratory processes

Others:   Safety requirements for electrical equipment for measurement, control and laboratory use, Technical requirements for quality control of diagnostic reagents in phytosanitary laboratories, IEC 61326 Electromagnetic Compatibility Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Electrical equipment for measurement, control and laboratory use. Electromagnetic compatibility requirements, Laboratory environment requirements, Environmental requirements for laboratory equipment, Laboratory environment requirements, Environmental Condition Control Requirements, Laboratory Facility Environmental Control, Laboratory Facilities and Environmental Control, Environmental requirements of the laboratory, Laboratory Environmental Control Requirements.