ZH
RU
ES
Dust particle detection
Dust particle detection, Total:152 items.
In the international standard classification, Dust particle detection involves: Pesticides and other agrochemicals, Air quality, Occupational safety. Industrial hygiene, Non-destructive testing, Environmental protection, Analytical chemistry, Raw materials for rubber and plastics, Particle size analysis. Sieving, Rubber and plastics products, Milk and milk products, Ceramics, Hand-held tools, Powder metallurgy, Fertilizers, Electricity. Magnetism. Electrical and magnetic measurements, Data storage devices, Metrology and measurement in general, Paints and varnishes, Physics. Chemistry, Ventilators. Fans. Air-conditioners, Products of the chemical industry, Cutting tools, Testing of metals, Animal feeding stuffs.
HU-MSZT, Dust particle detection
Society of Automotive Engineers (SAE), Dust particle detection
- SAE ARP743A-1993 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF AIR IN DUST CONTROLLED SPACES BY THE PARTICLE COUNT METHOD
- SAE ARP743-1962 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF AIR IN DUST CONTROLLED SPACES BY THE PARTICLE COUNT METHOD
- SAE AS4792-2007 WATER CONDITIONING AGENTS FOR AQUEOUS MAGNETIC PARTICLE INSPECTION
Military Standard of the People's Republic of China-General Armament Department, Dust particle detection
- GJB/J 5416-2005 Calibration procedures for dust particle counters
- GJB 360.26-1987 Test methods for electronic and electrical components Particle impact noise detection
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Dust particle detection
- GB/T 30360-2013 Testing method of dustiness for granular pesticide product
- GB/T 20966-2007 Determination of particle size distribution for colliery powders
- GB/T 29367-2012 Determination of dust in cotton processing enterprises
- GB/T 14853.2-2006 Rubber compounding ingredients.Pelletized carbon black.Part 2:Determination of fines content and pellet attrition
- GB/T 2481.2-2009 Bonded abrasives-Determination and designation of grain size distribution-Part2:Microgrits
- GB/T 2481.2-1998 Bonded abrasives--Determination and designation of grain size distribution--Part 2: Microgrits F230 to F1200
Association of German Mechanical Engineers, Dust particle detection
- VDI 2066 Blatt 1-2006 Particulate matter measurement - Dust measurement in flowing gases - Gravimetric determination of dust load
- VDI 2066 Blatt 8-1995 Measurement of particles - Dust measurement in flowing gases - Measurement of smoke number in furnaces designed for EL-type fuel oil
- VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
- VDI 2268 Blatt 4-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by graphite-furnace atomic absorption spectrometry
- VDI 2268 Blatt 2-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by atomic absorption spectrometry after separation of their volatile hydrides
- VDI 2066 Blatt 10-2004 Particulate matter measurement - Dust measurement in flowing gases - Measurement of PM10 and PM2,5 emissions at stationary sources by impaction method
European Committee for Standardization (CEN), Dust particle detection
- PD CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light
- PD CEN/TS 16305:2012 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions
- CEN/TS 16305:2012 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions
- CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013)
- EN ISO 9934-2:2002 Non-Destructive Testing - Magnetic Particle Testing - Part 2: Detection media ISO 9934-2:2002
SAE - SAE International, Dust particle detection
- SAE ARP743A-1984 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Particle Count Method
- SAE ARP743B-2001 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
- SAE ARP743C-2010 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
- SAE AS4297-1993 WATER CONDITIONING AGENTS FOR AQUEOUS MAGNETIC PARTICLE INSPECTION
National Metrological Verification Regulations of the People's Republic of China, Dust particle detection
- JJG 547-1988 Verification Regulation of Dust Particles Counter
- JJG 846-1993 Verification Regulation of Digital Dust Measuring Meter of Light Scattering Method
- JJG(煤炭) 08-1996 Verification Regulation of Direct Reading Mine Dust Concentration Measuring Instrument
- JJG(电子) 310006-2006 Specification for verification of noise detectors for particle collision of devices
Korean Agency for Technology and Standards (KATS), Dust particle detection
- KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
- KS M ISO 11234:2007 Rubber compounding ingredients－Carbon black(pelletized)－Determination of dust content
- KS M ISO 11234-2007(2022) Rubber compounding ingredients－Carbon black(pelletized)－Determination of dust content
- KS B ISO 9934-2:2007 Non-destructive testing－Magnetic particle testing－Part 2：Detection media
- KS L 1617-2002 Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of content of coarse particles in ceramic powders by wet sieving method
- KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
Professional Standard - Coal, Dust particle detection
- MT 422-1996 Coal mine dust particle size distribution determination method (mass method)
Professional Standard - Petroleum, Dust particle detection
- SY/T 6892-2012 Methods of determining the particulate matter in natural gas pipeline
- SY 6892-2012 Dust Detection Method in Natural Gas Pipeline
PL-PKN, Dust particle detection
- PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette
- PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator
- PN Z04002 Arkusz 05-1974 Air purity protection Tests of dust physical properties Determination of average porosity and average kinecic size of dust particles
- PN-EN 50632-2-6-2016-02/A2-2021-10 E Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers
- PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles
- PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid
- PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
- PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)
Group Standards of the People's Republic of China, Dust particle detection
British Standards Institution (BSI), Dust particle detection
- BS ISO 21501-4:2018 Determination of particle size distribution. Single particle light interaction methods. Light scattering airborne particle counter for clean spaces
- BS ISO 21501-4:2007 Determination of particle size distribution. Single particle light interaction methods. Light scattering airborne particle counter for clean spaces
- BS EN 50632-2-6:2015 Electric motor-operated tools. Dust measurement procedure. Particular requirements for hammers
- BS EN 50632-2-6:2015+A2:2020 Electric motor-operated tools. Dust measurement procedure - Particular requirements for hammers
- BS EN ISO 3059:2012 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
- DD CEN/TS 16305:2012 Liming materials. Determination of the dust content of granular liming materials before and after simulated handling conditions
- 18/30380672 DC BS EN 50632-2-6 AMD1. Electric motor-operated tools. Dust measurement procedure. Part 2-6. Particular requirements for hammers
- 20/30419161 DC BS EN 50632-2-6 AMD2. Electric motor-operated tools. Dust measurement procedure. Part 2-6. Particular requirements for hammers
American Society for Testing and Materials (ASTM), Dust particle detection
- ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM F50-12(2015) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM F50-92(1996) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM F50-92(2001)e1 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM D4358-84(1999) Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
- ASTM D4358-05 Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
- ASTM D5217-91(2004) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM F50-12 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM F25-68(1999) Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Clean Rooms and Other Dust-Controlled Areas Designed for Electronic and Similar Applications
- ASTM F50-07 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM D5217-91(1998) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
- ASTM D5217-91(2009) Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
YU-JUS, Dust particle detection
- JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
Taiwan Provincial Standard of the People's Republic of China, Dust particle detection
- CNS 11028-2007 Method of test for milk and milk products - Determination of scorched particles
- CNS 11028-1988 Method of Test for Milk and Milk Products: Determination of Scorched Particles
- CNS 14314-1999 Method of test for particle density of fine ceramic powder
BR-ABNT, Dust particle detection
国家煤矿安全监察局, Dust particle detection
- MT/T 1171-2019 Technical Specifications for Detection of Floating Dust Concentration Underground in Coal Mines
International Organization for Standardization (ISO), Dust particle detection
- ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
- ISO 21501-4:2018 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
- ISO 3059:2012 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
- ISO 21501-4:2018/Amd 1:2023 Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces — Amendment 1
- ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
- ISO 9934-2:2002 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
- ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
- ISO/TS 17200:2013 Nanotechnology.Nanoparticles in powder form.Characteristics and measurements
- ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
RU-GOST R, Dust particle detection
- GOST R ISO 21501-4-2012 Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
- GOST 18318-1994 Metallic powders. Determination of particle size by dry sieving
- GOST 18318-1973 Metal powders. Method of sieve analysis
- GOST 25699.13-1990 Carbon black for rubber industry. Method for determination of fines content in pelleted carbon black
- GOST R 8.606-2004 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of aerosols, suspensions and powdery materials
- GOST R 56512-2015 Non-destructive testing. Metod of magneting particle testing. Standard technological processes
- GOST 13496.8-1972 Mixed feeds. Methods for the determination of size of crushed particle and the content of uncrushed seed of cultured and wild plants
Professional Standard - Electricity, Dust particle detection
- DL/T 2056-2019 Ion exchange resin and limestone powder particle size detection method laser diffraction method
CZ-CSN, Dust particle detection
- CSN 01 5015-1985 Non-destructive testing Magnetic particle method
- CSN ISO 4497:1993 Metallic powders. Determination of particle size by dry sieving
- CSN 34 5689-1981 Electrotechnical and electronic equipment. Tests of environmental effects. Dust test with a high cencentration of dust in testing environment
Professional Standard - Labor and Labor Safety, Dust particle detection
- LD 84-1995 Rules of inspect for classification of hazard levels due to exposure to industrial dust
Occupational Health Standard of the People's Republic of China, Dust particle detection
- GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration
Association Francaise de Normalisation, Dust particle detection
Professional Standard - Agriculture, Dust particle detection
- NY/T 55-1987 Determination of amylose in grains of rice,maize and millet
- GB 7648-1987 Rice, corn, millet grain amylose determination method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Dust particle detection
- GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces
Danish Standards Foundation, Dust particle detection
- DS/CEN/TS 16305:2012 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions
- DS/EN 50632-2-6:2020 Electric motor-operated tools – Dust measurement procedure – Part 2-6: Particular requirements for hammers
KR-KS, Dust particle detection
- KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
German Institute for Standardization, Dust particle detection
- DIN CEN/TS 16305:2012-04*DIN SPEC 10786:2012-04 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions; German version CEN/TS 16305:2012
- DIN EN ISO 9934-2:2003 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002); German version EN ISO 9934-2:2002
- DIN CEN/TS 16305:2012 Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions; German version CEN/TS 16305:2012
Professional Standard-Safe Production, Dust particle detection
- AQ/T 4268-2015 Method of rapid determination of dust concentration in the air of workplace.Light scattering method
Professional Standard - Chemical Industry, Dust particle detection
- HG/T 2347.7-1992 Determination of particle size in γ·Fe(index 2)O(index 3)magnetic powder
Japanese Industrial Standards Committee (JISC), Dust particle detection
- JIS R 1653:2003 Determination of content of coarse particle in fine ceramic powders by wet siezing method
- JIS Z 2320-2:2007 Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media
- JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
- JIS R 1629:1997 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
IN-BIS, Dust particle detection
GB-REG, Dust particle detection
European Committee for Electrotechnical Standardization（CENELEC）, Dust particle detection
- EN 50632-2-6:2015 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
Lithuanian Standards Office , Dust particle detection
- LST EN 50632-2-6/A2-2021 Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers
- LST EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
CENELEC - European Committee for Electrotechnical Standardization, Dust particle detection
ES-UNE, Dust particle detection
- UNE-EN 50632-2-6:2015/A2:2020 Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers (Endorsed by Asociación Española de Normalización in January of 2021.)
- UNE-EN 50632-2-6:2015 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
- UNE-EN 50632-2-6:2015/A1:2019 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers (Endorsed by Asociación Española de Normalización in January of 2020.)
AENOR, Dust particle detection
- UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
RO-ASRO, Dust particle detection
CH-SNV, Dust particle detection
- SN EN ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
国家市场监督管理总局、中国国家标准化管理委员会, Dust particle detection
- GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method
- GB/T 41456-2022 Nanotechnologies—Determination of the concentration of nanometer titanium dioxide airborne dust in workplace—Spectrophotometry method
- GB/T 2481.2-2020 Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits
American National Standards Institute （ANSI), Dust particle detection
API - American Petroleum Institute, Dust particle detection
- API PUBL 27-32466-1981 MEASURMENT OF SHALE DUST BURDEN IN LUNG TISSUE BY INSTRUMENTAL-METHOD NEUTRON ACTIVATION ANALYSIS
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Dust particle detection
- ASHRAE 52.1-1992 Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter
- ASHRAE 52.1 INT 1-2007 Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter
AT-OVE/ON, Dust particle detection
- OVE EN 50632-2-6-2021 Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers (german version)
GOSTR, Dust particle detection
- GOST R 57909-2017 Nanotechnologies. Powders from nanoparticles. Basic characteristics and methods for determination