ZH
RU
ES

Gas phase analysis method results

Gas phase analysis method results, Total:499 items.

In the international standard classification, Gas phase analysis method results involves: Petroleum products in general, Particle size analysis. Sieving, Analytical chemistry, Education, Organic chemicals, Products of the chemical industry, Testing of metals, Fuels, Natural gas, Quality, Nuclear energy engineering, Test conditions and procedures in general, Farming and forestry, Water quality, Ferrous metals, Waxes, bituminous materials and other petroleum products, Coals, Insulating fluids, Non-ferrous metals, Inorganic chemicals, Air quality, Paint ingredients, Environmental protection, Protection against fire, Insulation, Raw materials for rubber and plastics, Wastes, Fruits. Vegetables, General methods of tests and analysis for food products, Insulating materials, Crude petroleum, Tobacco, tobacco products and related equipment, Animal feeding stuffs, Pesticides and other agrochemicals, Laboratory medicine, Metrology and measurement in general, Edible oils and fats. Oilseeds, Earthworks. Excavations. Foundation construction. Underground works, Linear and angular measurements, Plastics, Measurement of volume, mass, density, viscosity, Milk and milk products, Meat, meat products and other animal produce, Paints and varnishes.


BE-NBN, Gas phase analysis method results

  • NBN 681 F-1966
  • NBN T 52-020-1990 Analyse van vloeibare aardoliekoolwaterstoffen - Gaschromatografische analyse - Bepaling van deorganische zuurstofverbindingen en van de organisch gebonden zuurstof met behulp van een zuurstof-specifieke detector (O-FID)

European Committee for Standardization (CEN), Gas phase analysis method results

  • PD CEN/TR 15522-2:2012 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
  • EN 15522-2:2023 Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
  • prEN 15522-2-2020 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
  • EN ISO 22753:2022 Molecular biomarker analysis - Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains - General requirements (ISO 22753:2021, Corrected version 2022-11)
  • EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
  • EN ISO 4259-1:2017/A2:2020 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 2 (ISO 4259-1:2017/Amd 2:2020)
  • EN ISO 4259-1:2017/A1:2019 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 1 (ISO 4259-1:2017/Amd 1:2019)
  • prEN ISO 4259-5 Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (ISO/DIS 4259-5:2022)
  • EN ISO 4259-2:2017/A1:2019 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test - Amendment 1 (ISO 4259-2:2017/Amd 1:2019)
  • EN ISO 17678:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO 17678:2010)
  • EN ISO 17059:2019 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2019)
  • EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2007)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Gas phase analysis method results

  • GJB 5409-2005 General specification for the canister supporting and missile loading vehicle of cruise missile

British Standards Institution (BSI), Gas phase analysis method results

  • BS ISO 9276-5:2005 Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
  • BS ISO 12787:2012 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
  • BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
  • PD ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
  • BS EN 15522-2:2023 Tracked Changes. Oil spill identification. Petroleum and petroleum related products. Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
  • BS ISO 7404-3:2009 Methods for the petrographic analysis of coals - Method of determining maceral group composition
  • BS ISO 22972:2004 Essential oils - Analysis by gas chromatography on chiral capillary columns - General method
  • BS PD CEN/TR 15522-2:2006 Oil spill identification — Waterborne petroleum and petroleum products — Part 2: Analytical methodology and interpretation of results
  • BS 7826-1:1995 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
  • BS IEC 60493-1:2011 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
  • BS EN 16274:2021 Method for analysis of allergens. Quantification of an extended list of 57 suspected allergens in ready to inject fragrance materials by gas chromatography mass spectrometry
  • BS 5202-18:1997 Methods for chemical analysis of tobacco and tobacco products - Determination of vapour-phase nicotine in air (gas-chromatographic method)
  • BS 5766-22:2001 Methods for analysis of animal feeding stuffs. Determination of residues of organochlorine pesticides. Gas chromatographic method
  • 20/30414292 DC BS EN ISO 4259-1 AMD2. Petroleum and related products. Precision of measurement methods and results. Part 1. Determination of precision data in relation to methods of test
  • BS EN 27941:1994 Methods of test for petroleum and its products. Commercial propane and butane. Analysis by gas chromatography
  • 21/30425149 DC BS EN 15522-2. Oil spill identification. Waterborne petroleum and petroleum products. Part 2. Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
  • BS 684-2.49:2000 Methods of analysis of fats and fatty oils. Other methods. Determination of stigmastadienes in vegetable oils. Method using capillary-column gas chromatography
  • 18/30350503 DC BS ENISO 4259-3. Petroleum and related products. Precision of measurement methods and results. Part 3. Monitoring and verification of published precision data in relation to methods of test
  • BS ISO 22753:2021 Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements
  • PD ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
  • BS EN ISO 22753:2022 Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements
  • BS ISO 17858:2007 Water quality - Determination of dioxin-like polychlorinated Biphenyls - Method using gas-chromatography/mass spectrometry
  • BS 5202-10:2001 Methods for chemical analysis of tobacco and tobacco products. Determination of organochlorine pesticide residues (gas chromatographic method)
  • BS 5202-13:2000 Methods for chemical analysis of tobacco and tobacco products - Determination of water in smoke condensate of cigarettes (gas chromatographic method)
  • BS EN ISO 17678:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method)
  • 22/30423088 DC BS EN ISO 4259-5. Petroleum and related products. Precision of measurement methods and results - Part 5. Statistical assessment of agreement between two different measurement methods that claim to measure the same property
  • 20/30364895 DC BS ISO 22753. Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements and definitions
  • BS EN ISO 17059:2007 Oilseeds. Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
  • BS EN ISO 17059:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
  • BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
  • BS 5202-12:2000 Methods for chemical analysis of tobacco and tobacco products - Determination of nicotine in smoke condensate of cigarettes (gas-chromatographic method)

American Society for Testing and Materials (ASTM), Gas phase analysis method results

  • ASTM E1950-98 Standard Practice for Reporting Results from Methods of Chemical Analysis
  • ASTM E1950-10 Standard Practice for Reporting Results from Methods of Chemical Analysis
  • ASTM D1946-82 Standard Method for Analysis of Reformed Gas by Gas Chromatography
  • ASTM D1946-77 Standard Method for Analysis Of Reformed Gas By Gas Chromatography
  • ASTM D1945-03 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-91 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-03(2010) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-96e1 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-14(2019) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM E853-01(2008) Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)
  • ASTM E1950-17 Standard Practice for Reporting Results from Methods of Chemical Analysis
  • ASTM D4492-03 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D4492-07 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D4492-98 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D4424-90(2001)e1 Standard Test Method for Butylene Analysis by Gas Chromatography
  • ASTM D4424-09 Standard Test Method for Butylene Analysis by Gas Chromatography
  • ASTM D1945-96(2001) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM D1945-14 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • ASTM UOP832-83 Carbon Structure of C9 and Lower Boiling Hydrocarbons by Gas Chromatography
  • ASTM D7235-05 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D7235-14 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D933-84(2012) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D4492-10 Standard Test Method for Analysis of Benzene by Gas Chromatography
  • ASTM D4424-09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography
  • ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D7057-04 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM E1616-94(2002)e1 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM E1616-94 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM E1616-94(2002) Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM D3797-00 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D3797-04 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D3797-05 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D3798-03 Standard Test Method for Analysis of p-Xylene by Gas Chromatography
  • ASTM D3760-02 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D3760-98 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D3797-03 Standard Test Method for Analysis of o-Xylene by Gas Chromatography
  • ASTM D3760-08 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM E1616-08 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
  • ASTM E1863-18 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
  • ASTM D7057-09 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM E1863-97 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
  • ASTM E1863-97(2002) Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
  • ASTM D7266-13 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • ASTM D7266-13(2018)e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • ASTM D6142-21 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
  • ASTM D5442-17 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D7266-23 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • ASTM D3612-02(2017) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
  • ASTM D5441-98(2003)e1 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • ASTM D5442-93(1998) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D6144-97 Standard Test Method for Analysis of AMS (alpha-Methylstyrene) by Capillary Gas Chromatography
  • ASTM D3760-12 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D4424-90(1995) Standard Test Method for Butylene Analysis by Gas Chromatography
  • ASTM D3760-13 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D5442-93(2013) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D6142-03 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
  • ASTM D3612-96 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
  • ASTM D3612-01 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
  • ASTM D3612-02e1 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
  • ASTM E1763-06 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
  • ASTM D4025-08a Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D7266-13e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • ASTM D1137-53 Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
  • ASTM D3798-00 Standard Test Method for Analysis of p-Xylene by Gas Chromatography
  • ASTM D3760-02e1 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D5135-07 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D7266-07 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • ASTM D5135-95 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D6142-97 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
  • ASTM D5135-02e1 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D5135-02 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D5135-21 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D7796-12 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
  • ASTM D7871-19 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
  • ASTM D7871-18 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
  • ASTM D7871-23 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
  • ASTM D5135-16e1 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D3760-18 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • ASTM D7796-17 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
  • ASTM D5441-98(2017) Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • ASTM D6142-16 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
  • ASTM D5135-16 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D7360-16 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
  • ASTM E1763-98 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
  • ASTM E1763-98(2003) Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
  • ASTM D3612-02(2009) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
  • ASTM D3465-00(2007)e1 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
  • ASTM D6526-10 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
  • ASTM D7796-21 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
  • ASTM D7057-23 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM D5441-21 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • ASTM D5830-22 Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
  • ASTM D6142-12 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
  • ASTM D3465-14 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
  • ASTM D5135-14 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • ASTM D2163-14 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum 40;LP41; Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM D2163-14e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum 40;LP41; Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM D7266-07e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • ASTM D6142-08 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
  • ASTM D5441-98 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • ASTM D5441-93 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • ASTM D3465-00 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
  • ASTM D7360-11 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
  • ASTM D6526-12 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
  • ASTM D7871-13 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
  • ASTM D7057-13 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM D5830-95(2001) Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
  • ASTM D5830-95 Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
  • ASTM D4059-00(2018) Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • ASTM D6144-22 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
  • ASTM D5441-98(2013) Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • ASTM D7057-18 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM D6563-05 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6144-04 Standard Test Method for Analysis of AMS (alpha-Methylstyrene) by Capillary Gas Chromatography
  • ASTM D7716-11a Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
  • ASTM D6563-05e1 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D6563-12 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D5713-00 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • ASTM D4059-00(2005)e1 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • ASTM D4059-00 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • ASTM D2360-07 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
  • ASTM D1717-65(1975)e1 Method of Test for Analysis of Commercial Butane-Butiene Mixtures and Isolutylene by Gas Chromatography
  • ASTM D4059-00(2010) Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • ASTM D6144-12 Standard Test Method for Analysis of AMS (alpha;-Methylstyrene) by Capillary Gas Chromatography
  • ASTM D2268-93(2017) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • ASTM D6144-13 Standard Test Method for Analysis of AMS (alpha;-Methylstyrene) by Capillary Gas Chromatography
  • ASTM D6144-17 Standard Test Method for Analysis of AMS (&x3b1;-Methylstyrene) by Capillary Gas Chromatography
  • ASTM F3417-20 Standard Test Method for Gas Chromatography Analysis of Petroleum Waxes Used in Equestrian Synthetic Surfaces
  • ASTM D5713-05 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • ASTM D5713-09 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • ASTM D2268-93(1998) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • ASTM E611-08 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM D2268-21 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • ASTM D5134-13(2017) Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D5303-92(1997) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
  • ASTM D5134-98 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D5134-98(2003) Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D2268-93(2003)e1 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • ASTM D2268-93(2008) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • ASTM D6563-11a Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D5713-23 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • ASTM D2268-93(2013) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • ASTM D5713-14 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • ASTM D5134-13 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D6563-00 Test Method for Benzene, Toluene, Xylene, (BTX) Concentrates Analysis by Capillary Column Gas Chromatography
  • ASTM D5134-98(2008)e1 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D7504-12 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • ASTM D8003-15 Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
  • ASTM D8003-15a Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
  • ASTM D6563-11 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
  • ASTM D7504-15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • ASTM E2649-09 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
  • ASTM D5713-14(2018)e1 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • ASTM D5443-04(2009)e1 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200176;C by Multi-Dimensional Gas Chromatography
  • ASTM D5134-21 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D5443-93(1998) Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200176C by Multi-Dimensional Gas Chromatography
  • ASTM D5443-93(2003)e1 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography
  • ASTM D5443-14(2018) Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
  • ASTM D4815-15 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
  • ASTM D4815-15b Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
  • ASTM D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
  • ASTM D836-84 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
  • ASTM D836-77 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
  • ASTM D7504-11 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • ASTM D5769-10 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
  • ASTM D5443-04 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200176;C by Multi-Dimensional Gas Chromatography
  • ASTM E1618-11 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
  • ASTM D5443-14 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
  • ASTM D5443-23 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
  • ASTM D7649-10(2017) Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis
  • ASTM D7649-19 Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis

Japanese Industrial Standards Committee (JISC), Gas phase analysis method results

  • JIS K 0114:1993 General rules for gas chromatographic analysis
  • JIS K 0114:2000 General rules for gas chromatographic analysis
  • JIS Z 8819-1:1999 Representation of results of particle size analysis -- Part 1: Graphical representation
  • JIS K 5601-5-1:2006 Testing methods for paint components -- Part 5: Determination of volatile organic compound (VOC) content in paints -- Section 1: Gas-chromatographic method

Professional Standard - Education, Gas phase analysis method results

  • JY/T 0574-2020 General Rules for Gas Chromatographic Analysis Methods
  • JY/T 021-1996 General rules for analytical gas chromatography methods

Military Standard of the People's Republic of China-General Armament Department, Gas phase analysis method results

  • GJB 9624-2019 Rapid analysis and evaluation method for space launch flight results
  • GJB 770.306-1989 Test methods for gunpowder analysis - Determination of the content of nitroglycerin, gina and No. 2 neutralizing agent in double base powder by gas chromatography

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas phase analysis method results

  • GB/T 28901-2012 Analysis of coke-oven gas composition by gas chromatography
  • GB/T 15445.5-2011 Representation of results of particle size analysis.Part 5:Methods of calculations relating to particle size analyses using logarithmic normal probability distribution
  • GB/T 8639.7-1988 Vanadium--Determination of oxygen content--Impulse fusion-gas chromatographic method
  • GB/T 18340.1-2010 Organic geochemical analysis methods for geological samples.Part 1:Analysis of light crude oils.Gas chromatography
  • GB/T 13747.21-1992 Zirconium and zirconium alloys--Determination of hydrogen content--Vacuum heating gas chromatographic method
  • GB/T 19421.1-2003 Test methods of crystalline layered sodium disilicate--Qualitative analysis of delta-crystalline layered sodium disilicate--Method of X-ray diffractometer
  • GB/T 18340.1-2001 Organic geochemical measurements of geological samples--Method for the analysis of light mass crude oils by gas chromatography
  • GB/T 18340.5-2010 Methods for organic geochemical analysis of geological samples - Part 5: Gas chromatography for the analysis of saturated hydrocarbons in rock extracts and crude oil
  • GB/T 16587-1996 Fast gas chromatographic method for analyzing active ingredients of pesticides--Part 1: 12 kinds of pesticides
  • GB/T 4698.15-1996 Sponge titanium, titanium and titanium alloys--Determination of hydrogen content--Vacuum heating gas chromatographic method
  • GB/T 21223-2007 Guide for the statistical analysis of ageing test data.Methods based on mean values of normalement diatributed test results
  • GB/T 6683.3-2023 Precision of measurement methods and results for petroleum and related products - Part 3: Monitoring and verification of published precision data for test methods
  • GB/T 21223.1-2015 Guide for the statistical analysis of ageing test data.Part 1:Methods based on mean values of normally distributed test results
  • GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
  • GB/T 18340.5-2001 Organic geochemical measurements of geological samples--Method for the analysis of saturated hydrocarbons of soluble organic matter in rocks and the crude oils by gas chromatography

国家能源局, Gas phase analysis method results

  • SY/T 5259-2019 Gas chromatographic analysis method of light hydrocarbons in tank top gas
  • SY/T 7315-2016 Comprehensive two-dimensional gas chromatography component analysis method for condensate oil

International Organization for Standardization (ISO), Gas phase analysis method results

  • ISO 9276-5:2005 Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
  • ISO 12787:2011 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
  • ISO 9276-1:1990 Representation of results of particle size analysis; part 1: graphical representation
  • ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
  • ISO 22972:2004 Essential oils - Analysis by gas chromatography on chiral capillary columns - General method
  • ISO 7404-4:2017 Methods for the petrographic analysis of coals — Part 4: Method of determining microlithotype, carbominerite and minerite composition
  • ISO 7404-3:2009 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
  • ISO 7404-3:1984 Methods for the petrographic analysis of bituminous coal and anthracite; Part 3 : Method of determining maceral group composition
  • ISO 22753:2021 Molecular biomarker analysis — Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains — General requirements
  • ISO 4259-1:2017 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test
  • ISO 7404-3:1994 Methods for the petrographic analysis of bituminous coal and anthracite - Part 3: Method of determining maceral group composition
  • ISO 4259-2:2017 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test
  • ISO 4259-1:2017/Amd 2:2020 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test; Amendment 2
  • ISO 16000-39:2019 Indoor air — Part 39: Determination of amines — Analysis of amines by (ultra-) high-performance liquid chromatography coupled to high resolution or tandem mass spectrometry
  • ISO 4259-1:2017/Amd 1:2019 Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test — Amendment 1
  • ISO 4259-3:2020 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
  • ISO/DIS 4259-5 Petroleum and related products — Precision of measurement methods and results — Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property
  • ISO/FDIS 4259-5:2023 Petroleum and related products — Precision of measurement methods and results — Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property
  • ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
  • ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
  • ISO 4259-2:2017/Amd 1:2019 Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test — Amendment 1
  • ISO 17678:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method)
  • ISO 17678:2010|IDF 202:2010 Determination of milk fat purity by gas chromatographic analysis of triglycerides in milk and milk products (Reference Method)
  • ISO 17059:2007 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
  • ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results

Danish Standards Foundation, Gas phase analysis method results

  • DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
  • DS/ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
  • DS/ISO 22753:2021 Molecular biomarker analysis – Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains – General requirements
  • DS/IEC 60493-1:2012 Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results
  • DS/CEN/TR 15522-2:2013 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
  • DS/EN ISO 4259-1:2021 Petroleum and related products – Precision of measurement methods and results – Part 1:Determination of precision data in relation to methods of test – AMENDMENT 2 (ISO 4259-1:2017/Amd 2:2020)
  • DS/ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
  • DS/EN 16274:2021 Method for analysis of allergens – Quantification of an extended list of 57 suspected allergens in ready to inject fragrance materials by gas chromatography mass spectrometry

Korean Agency for Technology and Standards (KATS), Gas phase analysis method results

  • KS M ISO 12787:2014 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
  • KS M ISO 12787-2014(2019) Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
  • KS M 0027-1993 General Rules for Analytical Methods in Gas Chromatography Mass Spectrometry
  • KS M ISO 2718-2004(2014) Standard layout for a method of chemical analysis by gas chromatography
  • KS M 0027-2008(2018) General rules for analytical methods in gas chromatography mass spectrometry
  • KS H ISO 7609-2014(2019) Essential oils — Analysis by gas chromatography on capillary columns — General method
  • KS C 2375-2006(2016) Analytical method of polychlorinated biphenyls(PCBs)by gas chromatography peak pattern comparison
  • KS H ISO 7359-2014(2019) Essential oils — Analysis by gas chromatography on packed columns — General method
  • KS H ISO 22972:2006 Essential oils-Analysis by gas chromatography on chiral capillary columns-General method
  • KS H ISO 22972:2014 Essential oils — Analysis by gas chromatography on chiral capillary columns — General method
  • KS H ISO 22972-2014(2019) Essential oils — Analysis by gas chromatography on chiral capillary columns — General method
  • KS C 2375-2006 Analytical method of polychlorinated biphenyls(PCBs)by gas chromatography peak pattern comparison
  • KS M ISO 4259-1:2019 Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test
  • KS C IEC 60493-1:2019 Guide for the statistical analysis of ageing test data — Part 1:Methods based on mean values of normally distributed test results
  • KS C IEC 60493-1:2002 Guide for the statistical analysis of ageing test data－Part 1：Methods based on mean values of normally distributed test results
  • KS M ISO 4259-2:2021 Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test
  • KS M ISO 4259-2-2021(2022) Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test
  • KS Q ISO 22971-2012(2022) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil
  • KS M 1079-2008 Determination of PCNs and PCTs in polymer by GC/MS
  • KS M ISO 4259-3:2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
  • KS Q ISO 22971:2012 Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and eproducibility results
  • KS M 2412-2004 Test method for determination of free and total glycerine in B-100 biodiesel methyl esters by gas chromatography
  • KS M 2409-2005 Standard test method for determination of individual components in spark ignition engine fuels by 100 metre capillary (with precolumn) high-resolution gas chromatography
  • KS Q ISO 22971-2012(2017) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil
  • KS I ISO 16200-1:2019 Workplace air quality ― Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography ―Part 1: Pumped sampling method

Professional Standard - China Metal Association, Gas phase analysis method results

  • CSM 01 01 01 06-2006 Specification for Uncertainty Evaluation of Measurement Results of Gas Analysis Methods in Iron, Steel and Alloys
  • CSM 01010106-2006 Specification for Uncertainty Evaluation of Measurement Results of Gas Analysis Methods in Iron, Steel and Alloys

Association Francaise de Normalisation, Gas phase analysis method results

  • NF T75-612*NF ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
  • NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques
  • NF T75-401:1985 Essential oils. Analysis by gas chromatography on capillary column. General method.
  • NF T75-355:1986 Essentials oils. Oil of hysope (hyssopus {Officinalis} {Linnaeus}).
  • NF T75-401:2014 Huiles essentielles - Analyse par chromatographie en phase gazeuse sur colonne capillaire - Méthode générale
  • NF T75-425*NF ISO 22972:2004 Essential oils - Analysis by gas chromatography on capillary chiral column - General method.
  • NF ISO 22972:2004 Huiles essentielles - Analyse par chromatographie en phase gazeuse sur colonne capillaire chirale - Méthode générale
  • NF M07-033-1*NF EN ISO 4259-1:2017 Petroleum and related products - Precision of measurement methods and results - Part 1 : determination of precision data in relation to methods of test
  • NF EN ISO 4259-2:2017 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 2 : application des valeurs de fidélité relatives aux méthodes d'essai
  • NF EN ISO 4259-1:2017 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 1 : détermination des valeurs de fidélité relatives aux méthodes d'essai
  • NF T75-400:1985 Huiles essentielles - Analyse par chromatographie en phase gazeuse sur colonne remplie - Méthode générale.
  • NF T75-425:1997 Essential oils. Analysis by gas chromatography on capillary chiral column. General method.
  • NF M07-033-2*NF EN ISO 4259-2:2017 Petroleum and related products - Precision of measurement methods and results - Part 2 : interpretation and application of precision data in relation to methods of test
  • NF EN ISO 4259-1/A1:2019 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 1 : détermination des valeurs de fidélité relatives aux méthodes d'essai - Amendement 1
  • FD T90-465-2:2019 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 2 : technical enumeration
  • NF M07-033-1/A2:2020 Petroleum and related products - Precision of measurement methods and results - Part 1 : determination of precision data in relation to methods of test - Amendment 2
  • NF M07-033-1/A1*NF EN ISO 4259-1/A1:2019 Petroleum and related products - Precision of measurement methods and results - Part 1 : determination of precision data in relation to methods of test - Amendment 1
  • NF EN 15522-2:2023 Identification des pollutions pétrolières - Pétrole et produits pétroliers - Partie 2 : méthode d'analyse et interprétation des résultats sur la base des analyses par CPG DIF et CPG-SM faible résolution
  • NF M07-033-3*NF EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3 : monitoring and verification of published precision data in relation to methods of test
  • NF M07-033-2/A1*NF EN ISO 4259-2/A1:2019 Petroleum and related products - Precision of measurement methods and results - Part 2 : interpretation and application of precision data in relation to methods of test - Amendment 1
  • NF EN ISO 4259-3:2020 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 3 : surveillance et vérification des données de fidélité publiées relatives aux méthodes d'essai
  • NF M07-119-3:2008 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3 : crude oil.
  • NF M07-119-3*NF EN 15199-3:2020 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3 : crude oil
  • NF EN 16956:2017 Cosmétiques - Méthodes analytiques - Méthode CLHP couplée à la détection UV pour l'identification et l'analyse de l'hydroquinone, de ses éthers et des corticostéroïdes dans les produits cosmétiques éclaircissants de la peau
  • XP ISO/TS 12828-3:2020 Méthode de validation des analyses de gaz d'incendie - Partie 3 : considérations relatives aux essais interlaboratoires
  • NF EN ISO 4259-2/A1:2019 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 2 : application des valeurs de fidélité relatives aux méthodes d'essai - Amendement 1
  • NF EN ISO 4259-1/A2:2020 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 1 : détermination des valeurs de fidélité relatives aux méthodes d'essai - Amendement 2
  • NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
  • NF EN 14662-3:2015 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site
  • FD T90-465-1:2014 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 1 : references, definition and general principles
  • XP X65-040-3*XP ISO/TS 12828-3:2020 Validation method for fire gas analysis - Part 3 : considerations related to interlaboratory trials
  • NF EN ISO 21253-1:2019 Qualité de l'eau - Méthodes d'analyse de composés multi-classes - Partie 1 : critères pour l'identification des composés cibles par chromatographie en phase gazeuse et liquide et spectrométrie de masse
  • NF T75-616:2012 Methods for analysis of allergens - Quantification of suspected fragrance allergens in consumer products - Step 1 : GC analysis of ready-to-inject sample
  • NF EN ISO 22753:2022 Analyse moléculaire de biomarqueurs - Méthode pour l'évaluation statistique des résultats d'analyse obtenus lors des essais de souséchantillons multiples de semences et de graines génétiquement modifiées - Exigences générales
  • NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
  • NF V04-026:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method).
  • NF EN 14662-4:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 4 : échantillonnage par diffusion suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
  • NF ISO 7270-2:2012 Caoutchouc - Méthodes d'analyse par pyrolyse et chromatographie en phase gazeuse - Partie 2 : détermination du rapport styrène/butadiène/isoprène
  • NF ISO 16258-1:2015 Air des lieux de travail - Fraction alvéolaire de la silice cristalline par diffraction de rayons X - Partie 1: méthode directe d'analyse sur filtre
  • NF V03-935:2009 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method).
  • NF A06-000:1979 Statistical interpretation of interlaboratory tests. Simplified method applicable to maximum 20 laboratories and maximum 10 results per laboratory.
  • NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
  • NF EN ISO 4259-4:2022 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 4 : utilisation de cartes de contrôle statistique pour valider l'état 'sous maîtrise statistique' pour l'exécution d'une méthode d'essai no...

Professional Standard - Petroleum, Gas phase analysis method results

  • SY/T 6188-1996 Gas Chromatographic Analysis Method of Rock Pyrolysis
  • SY/T 5779-1995 Gas Chromatographic Analysis Method of Crude Oil Whole Hydrocarbons
  • SY/T 6188-2016 Gas Chromatographic Analysis Method of Rock Pyrolysis
  • SY/T 5259-2013 Gas chromatography analysis method for light hydrocarbon from cuttings head space gas
  • SY/T 5259-1991 Gas Chromatographic Analysis Method for Light Hydrocarbons in Debris Tank Top Gas
  • SY/T 5779-2008 Analytical method of hydrocarbons in petroleum and sediment by gas chromatography
  • SY 5779-2008 Gas Chromatographic Analysis Method for Petroleum and Sedimentary Organic Matter Hydrocarbons
  • SY/T 6242-1996 Gas Chromatography Analysis Method of Oleaginous Colloid Wax Content in Crude Oil
  • SY/T 6196-1996 Gas Chromatographic Analysis Method for Chloroform Extracts from Rocks and Aromatics in Crude Oil
  • SY/T 5120-1997 Analytical method of gas chromatography on saturated hydrocarbons of rock chloroform extract and crude oil

KR-KS, Gas phase analysis method results

  • KS M 0027-2008(2023) General rules for analytical methods in gas chromatography mass spectrometry
  • KS M ISO 4259-1-2019 Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test
  • KS C IEC 60493-1-2019 Guide for the statistical analysis of ageing test data — Part 1:Methods based on mean values of normally distributed test results
  • KS M ISO 4259-2-2021 Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test
  • KS M ISO 4259-3-2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
  • KS I ISO 16200-1-2019 Workplace air quality ― Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography ―Part 1: Pumped sampling method

IN-BIS, Gas phase analysis method results

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gas phase analysis method results

  • ASHRAE 4714-2004 Domestic Hot Water End Use Analysis Methods and Preliminary Results (RP-1172)

RU-GOST R, Gas phase analysis method results

  • GOST ISO 12787-2016 Perfumery and cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
  • GOST ISO 22972-2014 Essential oils. Analysis by gas chromatography on chiral capillary columns. General method
  • GOST 9414.3-1993 Methods for the petrographic analysis of bituminous coal and anthracite. Part 3. Method of determining maceral group composition
  • GOST 13379-1982 Petroleum. Determination of C1-C6 hydrocarbons by method of gas chromatography
  • GOST 8.485-2013 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
  • GOST R 54035-2010 Food products, feeds, food raw materials. Method of determination of anabolic steroids and stylben derivatives by gas chromatography with mass spectrometry detector

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Gas phase analysis method results

  • REPORT M.2136-2008 Theoretical analysis and testing results pertaining to the determination of relevant interference protection criteria of ground-based meteorological radars

未注明发布机构, Gas phase analysis method results

  • BS 1016-100:1994(1999) Methods for Analysis and testing of coal and coke — Part 100 : General introduction and methods for reporting results
  • BS 5443:1977(2011) Recommendations for A standard layout for methods of chemical analysis by gas chromatography

Professional Standard - Aerospace, Gas phase analysis method results

  • QJ 2263-1992 Analysis Method of Flight Test Result of Surface-to-Air Missile Guidance and Control System
  • QJ 1385A-2006 Analysis Method of Warhead Flight Mechanics Results of Surface-to-Surface Missile Flight Test
  • QJ 1385-1988 Analysis Method of Warhead Flight Mechanics Results of Surface-to-Surface Missile Flight Test
  • QJ 2838.2-1996 Methylhydrazine Purity and Moisture Analysis Method Methylhydrazine Moisture Gas Chromatography Analysis Method (External Standard Method)

German Institute for Standardization, Gas phase analysis method results

  • DIN EN 15522-2:2022 Oil spill identification - Petroleum and Petroleum related products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-low resolution-MS analyses; German and English version prEN 15522-2:2022
  • DIN EN 15522-2:2023-07 Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses; German version EN 15522-2:2023
  • DIN 53174-2:1992 Solvents for paints, varnishes and similar coating materials; methods of analysis for solvent mixtures; gas chromatographic method
  • DIN 38402-71:2020-10 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalence of two analysis methods based on the comparison of analysis results (A 71)
  • DIN EN ISO 4259-2:2020-02 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017 + Amd 1:2019); German version EN ISO 4259-2:2017 + A1:2019
  • DIN 51899:2010-09 Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods; only on CD-ROM / Note: To be amended by DIN 51899/A1 (2022-01).
  • DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
  • DIN EN 15522-2:2021 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses; German and English version prEN 15522-2:2020
  • DIN 38402-1:1987 German standard methods for the examination of water, waste water and sludge; general information (group A); recording of analysis results (A 1)
  • DIN EN ISO 4259-3:2020-08 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020); German version EN ISO 4259-3:2020
  • DIN 38402-1:2011-09 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 1: Recording of analysis results (A 1)
  • DIN 38402-1:2011 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 1: Recording of analysis results (A 1)
  • DIN EN ISO 4259-1/A2:2020 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - AMENDMENT 2 (ISO 4259-1:2017/DAM 2:2020); German and English version EN ISO 4259-1:2017/prA2:2020
  • DIN EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
  • DIN EN ISO 4259-1:2021-05 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017 + Amd 1:2019 + Amd 2:2020); German version EN ISO 4259-1:2017 + A1:2019 + A2:2020
  • DIN EN ISO 4259-5:2022-11 Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (ISO/DIS 4259-5:2022); German and English vers...
  • DIN CEN/TR 15522-2:2012 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses; English version CEN/TR 15522-2:2012
  • DIN 38407-9:1991 German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of benzene and some of its derivatives by gas chromatography (F 9)
  • DIN EN ISO 22753:2023 Molecular biomarker analysis - Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains - General requirements (ISO 22753:2021, Corrected version 2022-11)
  • DIN ISO/TR 22971:2012 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results (ISO/TR 22971:2005);
  • DIN EN ISO 4259-1:2021 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017 + Amd 1:2019 + Amd 2:2020); German version EN ISO 4259-1:2017 + A1:2019 + A2:2020
  • DIN EN ISO 22753:2023-03 Molecular biomarker analysis - Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains - General requirements (ISO 22753:2021, Corrected version 2022-11); German versio...

Group Standards of the People's Republic of China, Gas phase analysis method results

  • T/HNPCIA 29-2023 Analysis of industrial 6-aminohexonitrile by gas chromatography
  • T/GXAS 003-2017 Gas chromatography analysis method of caryophyllene in heavy turpentine
  • T/GXAS 004-2017 Gas Chromatographic Analysis Method of Longifolene in Heavy Turpentine Oil

Guangxi Provincial Standard of the People's Republic of China, Gas phase analysis method results

国家林业局, Gas phase analysis method results

  • LY/T 2706-2016 Gas chromatographic analysis method of modified rosin resin acid
  • LY/T 2861-2017 Capillary gas chromatographic analysis method of rosin resin acid

Standard Association of Australia （SAA）, Gas phase analysis method results

Professional Standard - Electron, Gas phase analysis method results

  • SJ 3239-1989 General requirement for gas chromatography analysis method

Professional Standard - Agriculture, Gas phase analysis method results

  • 水产品质量安全检验手册 2.1.3.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products 1st Quality Sensory Analysis Methods for Aquatic Products (GB 10220-1988) 3. Results Analysis
  • 水产品质量安全检验手册 1.2.4.7-2005 Chapter 1 General introduction Section 2 Analytical methods for aquatic product inspection 4. Physical and chemical analysis methods (7) Gas chromatography
  • SN/T 5055.3-2018 Biodiesel Analytical Methods Part 3: Determination of Fatty Acid Methyl Esters Content by Comprehensive Two-Dimensional Gas Chromatography
  • SN/T 5055.2-2018 Analytical methods for biodiesel - Part 2: Determination of fatty acid methyl esters and methyl linolenic acid by gas chromatography

工业和信息化部, Gas phase analysis method results

  • HG/T 5583-2019 Analysis method of chemical components of ethylene gas phase polymerization catalyst
  • HG/T 5028-2016 Analysis method of chemical components of butyraldehyde gas-phase hydrogenation to butanol catalyst
  • HG/T 5415-2018 Analysis method of chemical components of catalysts for methanol gas-phase dehydration to dimethyl ether
  • HG/T 5196-2017 Analysis method of chemical composition of catalyst for gas phase hydrogenation of octenal to 2-ethylhexanol

International Telecommunication Union (ITU), Gas phase analysis method results

  • ITU-R REPORT M.2136-2008 Theoretical analysis and testing results pertaining to the determination of relevant interference protection criteria of ground-based meteorological radars

国家林业和草原局, Gas phase analysis method results

  • LY/T 3157-2019 Analysis method of chemical composition of rosin: capillary gas chromatography

Professional Standard - Chemical Industry, Gas phase analysis method results

  • HG/T 4856-2015 Analytical method of chemical composition for nickel series gas phase benzene hydrogenation catalysts
  • HG/T 4320-2012 Inorganic chemicals for industrial use.General rules for gas chromatographic analysis
  • HG/T 5027~5028-2016 Catalytic performance test and chemical composition analysis method of butyraldehyde gas-phase hydrogenation to butanol catalyst (2016)
  • HG/T 5417～5420-2018 Catalyst activity test method for methanol vapor phase dehydration to dimethyl ether, manganese-based ozonolysis catalyst chemical composition analysis method and activity test method, and chemical composition analysis method for n-olefin to isobutylene c
  • HG/T 5408～5411-2018 Analytical method for chemical composition of ruthenium carbon catalyst for hydrogenation of pyridine to piperidine, analytical method for chemical composition of inorganic sulfur catalyst in deliquefied gas, analytical method for chemical composition of
  • HG/T 5579～5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique

AWS - American Welding Society, Gas phase analysis method results

  • F1.5-1996 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
  • F1.5M-2003 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
  • F1.5-1987 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
  • F1.4-1987 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes
  • F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes

CEN - European Committee for Standardization, Gas phase analysis method results

  • PD CEN/TR 15522-2:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results
  • EN ISO 4259-1:2017 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test
  • EN ISO 4259-2:2017 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test
  • EN ISO 17678:2019 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides

ES-UNE, Gas phase analysis method results

  • UNE-CEN/TR 15522-2:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results (Endorsed by AENOR in April of 2007.)
  • UNE-EN ISO 4259-1:2018 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017)
  • UNE-EN ISO 4259-2:2018 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test (ISO 4259-2:2017)
  • UNE-EN ISO 4259-1:2018/A2:2021 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 2 (ISO 4259-1:2017/Amd 2:2020)
  • UNE-EN ISO 4259-1:2018/A1:2020 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 1 (ISO 4259-1:2017/Amd 1:2019)
  • UNE-EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
  • UNE-EN ISO 4259-2:2018/A1:2020 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test - Amendment 1 (ISO 4259-2:2017/Amd 1:2019)

American National Standards Institute （ANSI), Gas phase analysis method results

  • ANSI/ASTM D7796:2012 Test Method for Analysis of Ethyl Tertiary-Butyl Ether by Gas Chromatography
  • ANSI/ASTM D7796:2017 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

Professional Standard - Non-ferrous Metal, Gas phase analysis method results

  • YS/T 540.7-2006 Vanadium Chemical Analysis Method Pulse Melting-Gas Chromatography Determination of Oxygen Content

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas phase analysis method results

  • GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports
  • GB/T 33029-2016 Composition of turpentine and related terpene products—Test methods of capillary gas chromatography

Natural Gas Processor's Association (NGPA), Gas phase analysis method results

  • GPA STD 2103-2003 Tentative Method for the Analysis of Natural Gas Condensate Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
  • GPA STD 2286-2014 Method for the Extended Analysis of Natural Gas and Similar Gaseous Mixtures by Temperature Program Gas Chromatography
  • GPA STD 2286-1995 Tentative Method of Extended Analysis for Natural Gas and Similar Gaseous Mixtures by Temperature Programmed Gas Chromatography
  • GPA STD 2186-2014 Method for the Extended Analysis of Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography
  • GPA STD 2186-2002 Method for the Extended Analysis of Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography

IT-UNI, Gas phase analysis method results

  • UNI EN ISO 4259-1:2021 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test

RO-ASRO, Gas phase analysis method results

国家市场监督管理总局、中国国家标准化管理委员会, Gas phase analysis method results

  • GB/T 16840.4-2021 Technical determination methods for electrical fire evidence—Part 4: Metallographic analysis method
  • GB/T 6683.1-2021 Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test

YU-JUS, Gas phase analysis method results

  • JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results
  • JUS B.H8.351-1987 Methods of analysis of coal andcoke. Determination of the true relative density, the apparent relative densi-ty and the p orosity of coke

Professional Standard - Commodity Inspection, Gas phase analysis method results

  • SN/T 4115-2015 Determination of sulfur compounds in natural gas.Gas chromatography and sulfur chemiluminescence deterctor
  • SN/T 2297.5-2014 Chemical analysis method for the imported and exported gypsum and gypsum products.Part 5:Determination of sulfur content.Gas chromatography-mass

European Association of Aerospace Industries, Gas phase analysis method results

  • AECMA PREN 2591-C2-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part C2 - Climatic Sequence Issue P 1

AT-ON, Gas phase analysis method results

  • OENORM EN 15522-2-2021 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
  • OENORM EN ISO 4259-1:2021 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test (ISO 4259-1:2017 + Amd. 1:2019 + Amd. 2:2020) (consolidated version)

NL-NEN, Gas phase analysis method results

  • NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry
  • NEN 6334-1980 Test methods for vegetable and animal oils and fats Gaschromatographic analysis of methylesters of fatty acids

Professional Standard - Geology, Gas phase analysis method results

  • DZ/T 0064.72-2021 Analytical methods of groundwater quality - Part 72: Determination of dichlorvos, phorate, dimethoate, methyl parathion, malathion, chlorpyrifos and parathion by gas chromatography
  • DZ/T 0064.74-2021 Groundwater Quality Analysis Methods Part 74: Determination of Helium, Hydrogen, Oxygen, Argon, Nitrogen, Methane, Carbon Monoxide, Carbon Dioxide and Hydrogen Sulfide by Gas Chromatography

TH-TISI, Gas phase analysis method results

  • TIS 2489.2-2010 Standard test method for thinner.part 2: solvent composition analysis by gas chromatograph

Professional Standard - Public Safety Standards, Gas phase analysis method results

  • GA/T 205-1999 Methods of qualitative and quantitative analysis for tetramine in case samples by GC

International Electrotechnical Commission (IEC), Gas phase analysis method results

  • IEC 60493-1:1974 Guide for the statistical analysis of ageing test data - Part 1 : Methods based on mean values of normally distributed test results
  • IEC 60493-1:2011 Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results

IX-EU/EC, Gas phase analysis method results

  • 2002/657/EC-2002 Commission Decision Implementing Council Directive 96/23/EC Concerning the Performance of Analytical Methods and the Interpretation of Results (Text with EEA Relevance; Notified under Document Number C(2002)3044))

Professional Standard - Nuclear Industry, Gas phase analysis method results

  • EJ/T 1212.7-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part7: Determination of hydrogen by inert gas fusion method
  • EJ/T 1212.11-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part11: Determination of total gas by hot vacuum extraction
  • EJ/T 1212.11-2018 Analytical methods for sintered gadolinia-uranium dioxide pellets - Part 11: Determination of total gas content by thermal vacuum extraction
  • EJ/T 1212.1-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part1: Determination of oxygen to metal（O/M)in sintered gadolinium oxide-uranium dioxide pellets by atmospheric

ZA-SANS, Gas phase analysis method results

  • SANS 22971:2010 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

CH-SNV, Gas phase analysis method results

  • SN EN ISO 4259-1/A2:2021 Petroleum and related products - Precision of measurement methods and results - Part 1:Determination of precision data in relation to methods of test (ISO 4259-1:2017/Amd 2:2020); Amendment A2

Lithuanian Standards Office , Gas phase analysis method results

  • LST EN ISO 4259-1/A2:2021 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 2 (ISO 4259-1:2017/Amd 2:2020)
  • LST ISO 5725-1+AC:2002 Accuracy (trueness and precision) of measurement methods and results. Part 1: General principles and definitions (identical ISO 5725-1:1994)
  • LST EN ISO 17678:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO 17678:2010)

PL-PKN, Gas phase analysis method results

  • PN-EN ISO 4259-3-2020-08 P Petroleum and related products--Precision of measurement methods and results--Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
  • PN-EN ISO 4259-1-2018-01/A2-2021-05 E Petroleum and related products--Precision of measurement methods and results--Part 1:Determination of precision data in relation to methods of test--AMENDMENT 2 (ISO 4259-1:2017/Amd 2:2020)
  • PN-EN ISO 4259-1-2018-01/A1-2020-03 P Petroleum and related products--Precision of measurement methods and results--Part 1: Determination of precision data in relation to methods of test--Amendment 1 (ISO 4259-1:2017/Amd 1:2019)
  • PN A75052-14-1990 Fruits, vegetables and vegetable-meat products Methods of microbiological analyses Detection and enumeration of Clostridium perfringens
  • PN-EN ISO 4259-2-2018-01/A1-2020-03 P Petroleum and related products--Precision of measurement methods and results--Part 2: Interpretation and application of precision data in relation to methods of test--Amendment 1 (ISO 4259-2:2017/Amd 1:2019)
  • PN-EN 16274-2021-10 E Method for analysis of allergens -- Quantification of an extended list of 57 suspected allergens in ready to inject fragrance materials by gas chromatography mass spectrometry
  • PN C45300-08-1989 Aromatic hydrocarbons Test methods Determination of impurities in toluene by gas chromatography and evaluation of toluene content

Professional Standard - Water Conservancy, Gas phase analysis method results

  • SL/T 273.1-2001 Determination of trace nitrobenzenes by resin adsorption and gas ohromatography

Anhui Provincial Standard of the People's Republic of China, Gas phase analysis method results

  • DB34/T 2979.2-2017 Analytical methods of organic pollutants in plastics and their products - Part 2: Determination of formamide by gas chromatography-mass spectrometry
  • DB34/T 2979.1-2017 Analytical methods of organic pollutants in plastics and their products - Part 1: Determination of p-tert-octylphenol by gas chromatography-mass spectrometry
  • DB34/T 2979.3-2017 Analytical methods of organic pollutants in plastics and their products - Part 3: Determination of tris(2-chloroethyl) phosphate by gas chromatography-mass spectrometry
  • DB34/T 3368.3-2019 Analytical methods of hazardous substances in printed circuit boards - Part 3: Determination of polybrominated biphenyls and polybrominated diphenyl ethers by gas chromatography-mass spectrometry

European Committee for Electrotechnical Standardization（CENELEC）, Gas phase analysis method results

  • EN 60512-11-1:1999 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 11: Climatic Tests Section 1: Test 11a - Climatic Sequence

AENOR, Gas phase analysis method results

  • UNE-EN ISO 17678:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO 17678:2010)

  Gas Chromatography Common Analytical Methods, Gas chromatography analysis method, Gas chromatography analysis method, Gas Chromatography-Mass Spectrometry Method, Gas Chromatography Quantitative Analysis Method, Analysis of gas chromatography mass spectrometry results, Gas Chromatography Quantitative Analysis Method, Analysis of gas chromatography mass spectrometry results, Gas Chromatography-Mass Spectrometry Analysis Method, Gas phase analysis method, Gas chromatography analysis method steps, Analytical method of gas chromatography, How to analyze the results of gas chromatography mass spectrometry, Toluene gas phase analysis method, Gas chromatography analysis method, Gas Chromatography Analysis Method, Gas chromatography mass spectrometry method, Gas chromatography-mass spectrometry method, Gas phase quantitative analysis method, Gas phase analysis method results.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved