ZH

RU

ES

Sulfur content in asphalt

Sulfur content in asphalt, Total:500 items.

In the international standard classification, Sulfur content in asphalt involves: Waxes, bituminous materials and other petroleum products, Construction materials, Road engineering, Paints and varnishes, Pulps, Coals, Crude petroleum, Products of the chemical industry, Analytical chemistry, Wood-based panels, Adhesives, Metrology and measurement in general, Road vehicles in general, Test conditions and procedures in general, Road vehicle systems, Fuels, Organic chemicals, Rubber, Metalliferous minerals, Non-metalliferous minerals, Petroleum products in general, Lubricants, industrial oils and related products, Paint ingredients, Inorganic chemicals, Water quality, Testing of metals, Air quality, Refractories, Environmental protection, Terminology (principles and coordination), Protection of and in buildings, Protection against fire, Natural gas, Fertilizers.


NL-NEN, Sulfur content in asphalt

  • NEN 3966-1982 Bitumen and tar products Determination of the bitumen content of tar-bitumen
  • NEN 3956-1978 Bituminous materials -Test for free mineral acids in distilled tar

CZ-CSN, Sulfur content in asphalt

AT-ON, Sulfur content in asphalt

  • ONR CEN/TS 17481-2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
  • ONORM C 9220 Teil.1-1978 Bituminous materials; determination of the content of asphaltenes; precipitation inith normal heptane
  • ONORM C 9220 Teil.2-1978 Bituminous materials; determination of the content of asphaltenes; precipitation with cyclohexane
  • OENORM EN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
  • ONORM C 9220 Teil.3-1978 Bituminous materials; determination of the content of insolubles in toluene
  • ONORM C 9234-1988 Bitumen road emulsions; testing; determination of binder content
  • ONORM B 3646 Teil.8-1988 Roll roofings andprefabricated sheetsfor waterproofing, made ofbitumen or modified bitumen; testing;determination ofpolymer content

Association Francaise de Normalisation, Sulfur content in asphalt

  • XP T66-083*XP CEN/TS 17481:2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
  • NF EN 1428:2012 Bitumes et liants bitumineux - Détermination de la teneur en eau dans les émulsions de bitume - Méthode de distillation azéotropique
  • NF T66-082*NF EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
  • NF T66-001:1984 Determination of bitumen-content in natural rock-asphalt powders and masitc asphalts with "kumagawa-asphalt" method.
  • XP CEN/TS 17481:2020 Bitumes et liants bitumineux - Détermination de la teneur en sel des bitumes - Méthode par mesure de conductivité
  • NF P98-818-42:2021 Bituminous mixtures - Test methods - Part 42 : amount of foreign matter in reclaimed asphalt
  • NF T66-036:2009 Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation.
  • FD T66-028-2016 Bituminous binders - Determination of tar content of hydrocarbon bituminous binders containing tar - Gel permeation chromatography method
  • NF T66-028:1997 Bituminous binders. Mixed bitumen. Determination of tar content of bituminous tar and tar pitch. Gel permeation chromatography method.
  • NF EN 12697-47:2010 Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 47 : détermination de la teneur en cendres des bitumes naturels
  • NF T66-023:1984 BITUMEN EMULSIONS. DETERMINATION OF WATER CONTENT.
  • NF P98-818-47*NF EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47 : determination of the ash content of natural asphalts.
  • NF EN 16849:2016 Bitumes et liants bitumineux - Détermination de la teneur en eau des émulsions de bitume - Méthode par évaporation à la balance dessiccatrice
  • NF T66-015:2000 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2 : method by extraction.
  • NF EN 12606-1:2015 Bitumes et liants bitumineux - Détermination de la teneur en paraffines - Partie 1 : méthode par distillation
  • NF P98-818-42:2013 Bituminous mixtures - test methods for hot mix asphalt - Part 42: amount of foreign matter in reclaimed asphalt
  • NF P98-818-14:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 14 : water content.
  • NF P98-818-1:2006 Bituminous mixtures - Test methods for mix asphalt - Part 1 : soluble binder content.
  • NF P98-818-42:2006 Bituminous mixtures - Test methods for hot mix asphalt - Part 42 : amount of coarse foreign matters in reclaimed asphalt.
  • NF T66-049-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1 : method by distillation.
  • NF P98-818-1:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 1 : soluble binder content.
  • NF P98-141:1993 ASPHALT. SURFACE COURSE AND BINDER COURSE. HIGH MODULUS ASPHALT CONCRETE. DEFINITION. CLASSIFICATION. CHARACTERISTICS. MANUFACTURING. LAYING.
  • NF EN 12697-42:2021 Mélanges bitumineux - Méthodes d'essai - Partie 42 : quantité de matériaux étrangers présents dans les agrégats d'enrobés
  • NF P98-818-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28 : preparation of samples for determining binder content, water content and grading.
  • NF P98-818-14*NF EN 12697-14:2020 Bituminous mixtures - Test methods - Part 14 : water content
  • NF EN 12697-14:2020 Mélanges bitumineux - Méthodes d'essai - Partie 14 : teneur en eau
  • FD T66-042-2016 Hydrocarbon binders - Determination of the carbochemical heavy distillates content of mixed bitumens - Densimeter method
  • NF T66-042:1997 Hydrocarbon binders. Determination of the carbochemical heavy distillates content of mixed bitumens. Densimeter method.
  • NF P98-818-39:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 39 : binder content by ignition.
  • NF P98-818-39:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39 : binder content by ignition.
  • NF T60-115:2000 Petroleum products - Determination of asphaltene content (heptane insoluble).
  • NF Q50-005:1967 PULPS FOR PAPER. QUANTITY DETERMINATION OF SODIUM THIOSULPHATE IN PULP LIQUORS FOR PAPERMAKING.
  • XP P98-151:1996 Asphalt. Occasional inspections of voids content at the time of laying using a reference chart.
  • XP T66-067:2022 Bituminous binders - Determination of the glass transition temperature and of the cristallizable compounds in bitumens by Differential Scanning Calorimetry
  • FD T66-080-2016 Bituminous emulsions - Determination of water content - Evaporation procedure using drying balance
  • FD T66-080:2016 Bituminous emulsions - Determination of water content - Evaporation procedure using drying balance
  • NF ISO 8006:1986 Produits carbonés utilisés pour la production de l'aluminium - Brai pour électrodes - Détermination du taux de cendres.
  • NF EN 12697-1:2020 Mélanges bitumineux - Méthodes d'essai - Partie 1 : teneur en liant soluble
  • NF U42-178*NF EN 15960:2012 Fertilizers - Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates

European Committee for Standardization (CEN), Sulfur content in asphalt

  • CEN/TS 17481:2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
  • EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
  • EN 12697-1:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
  • EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
  • EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
  • EN 12697-1:2000/AC:2001 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 1: Soluble Binder Content Corrigendum; Ratified European Text
  • EN 12697-42:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt
  • prEN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
  • EN 12697-47:2023 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
  • EN 12697-39:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
  • EN 12697-28:2000 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading
  • EN 12697-13:2000/AC:2001 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 13: Temperature Measurement Corrigendum; Ratified European Text
  • EN 12697-14:2000/AC:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content; Amendment AC
  • EN 12697-14:2000 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content

German Institute for Standardization, Sulfur content in asphalt

  • DIN CEN/TS 17481:2020-10 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method; German version CEN/TS 17481:2020
  • DIN V 52049:1998 Testing of bitumen - Determination of water content of bituminous emulsions - Drying test
  • DIN EN 1428:1999 Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method; German version EN 1428:1999
  • DIN EN 1428:2012-03 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method; German version EN 1428:2012
  • DIN 53215:1998 Bitumen and bituminous binders - Determination of the non-volatile matter content of bituminous coating materials
  • DIN 53215:2014 Bitumen and bituminous binders - Determination of the non-volatile matter content of bituminous coating materials
  • DIN EN 16849:2016-12 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance; German version EN 16849:2016
  • DIN EN 12697-42:2021-03 Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt; German version EN 12697-42:2021
  • DIN EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method; German version EN 1428:2012
  • DIN 53215:2014-04 Bitumen and bituminous binders - Determination of the non-volatile matter content of bituminous coating materials
  • DIN SPEC 52049:2014 Testing of bitumen - Determination of water content of bituminous emulsions - Drying test by infrared dryers
  • DIN SPEC 52014:2013 Bitumens and bituminous binders - Determination of the content of cyclohexane insoluble parts
  • DIN EN 12697-47:2010-12 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts; German version EN 12697-47:2010 / Note: To be replaced by DIN EN 12697-47 (2021-10).
  • DIN V 52014:2005 Bitumens and bituminous binders - Determination of the content of cyclohexane insoluble parts
  • DIN EN 13614:2011 Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test; German version EN 13614:2011
  • DIN EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance; German version EN 16849:2016
  • DIN EN 12606-2:2000 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction; German version EN 12606-2:1999
  • DIN EN 12606-1:2015-11 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation; German version EN 12606-1:2015
  • DIN EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation English version of DIN EN 12606-1:2007-06
  • DIN EN 12697-47:2021-10 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts; German and English version prEN 12697-47:2021 / Note: Date of issue 2021-09-03*Intended as replacement for DIN EN 12697-47 (2010-12).
  • DIN EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts; German version EN 12697-47:2010
  • DIN EN 12697-14:2020 Bituminous mixtures - Test methods - Part 14: Water content
  • DIN EN 12697-14:2020-05 Bituminous mixtures - Test methods - Part 14: Water content; German version EN 12697-14:2020
  • DIN EN 12697-42:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt; German version EN 12697-42:2012
  • DIN EN 12697-42:2006 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt; English version of DIN EN 12697-42:2006-02
  • DIN 52018:2016-08 Bitumens and bituminous binders - Thermal effect in an oven and determination of change in mass by thermal effect
  • DIN EN 12697-14:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content; German version EN 12697-14:2000
  • DIN 51595:2000 Testing of petroleum products - Determination of the content of asphaltenes - Precipitation with heptane
  • DIN EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation; German version EN 12606-1:2015
  • DIN EN 12697-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading; German version EN 12697-28:2000
  • DIN EN 12697-1:2006 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content;English version of DIN EN 12697-1:2006-02
  • DIN EN 12697-1:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content; German version EN 12697-1:2012
  • DIN 51595:2000-11 Testing of petroleum products - Determination of the content of asphaltenes - Precipitation with heptane
  • DIN EN 12697-42:2021 Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt; German version EN 12697-42:2021
  • DIN ISO 3733:2003 Petroleum products and bituminous materials - Determination of water - Distillation method (ISO 3733:1999)
  • DIN 1996-5:1983 Testing of bituminous materials for road building and related purposes; Determination of water content
  • DIN 1996-6:1988 Testing of asphalt; determination of binder content and recovery of binder
  • DIN EN 12697-1:2020 Bituminous mixtures - Test methods - Part 1: Soluble binder content
  • DIN EN 12697-1:2020-05 Bituminous mixtures - Test methods - Part 1: Soluble binder content; German version EN 12697-1:2020
  • DIN EN 12697-39:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition; German version EN 12697-39:2012

British Standards Institution (BSI), Sulfur content in asphalt

  • PD CEN/TS 17481:2020 Bitumen and bituminous binders. Determination of salt content in bitumen. Electrical conductivity method
  • BS EN 1428:2012 Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method
  • BS EN 16849:2016 Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Method using a drying balance
  • BS EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Method by distillation
  • BS EN 12606-1:2015*BS 2000-459.1:2015 Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
  • BS EN 12606-1:2015 Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
  • BS EN 12697-47:2010 Bituminous mixtures.Test methods for hot mix asphalt. Part 47:Determination of the ash content of natural asphalts
  • 19/30396552 DC BS EN 12697-42. Bituminous mixtures. Test methods. Part 42. Amount of foreign matter in reclaimed asphalt
  • BS EN 1428:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method
  • BS EN 12697-47:2023 Bituminous mixtures. Test methods - Determination of the ash content of natural asphalts
  • BS EN 12697-42:2012 Bituminous mixtures. Test methods for hot mix asphalt. Amount of foreign matter in reclaimed asphalt
  • BS EN 12697-42:2005 Bituminous mixtures - Test methods for hot mix asphalt - Amount of coarse foreign matter in reclaimed asphalt
  • BS EN 12697-42:2021 Bituminous mixtures. Test methods. Amount of foreign matter in reclaimed asphalt
  • BS EN 12697-1:2012 Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content
  • BS EN 12697-14:2020 Bituminous mixtures - Test methods for hot mix asphalt - Water content
  • BS EN 12697-14:2000 Bituminous mixtures - Test methods for hot mix asphalt - Water content
  • BS EN 12697-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Preparation of samples for determining binder content, water content and grading
  • BS EN 12697-39:2012 Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition
  • BS EN 12697-39:2004 Bituminous mixtures - Test methods for hot mix asphalt - Binder content by ignition
  • BS EN 12606-2:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by extraction
  • BS EN 12606-2:2000*BS 2000-459.2:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by extraction
  • 21/30438592 DC BS EN 12697-47. Bituminous mixtures. Test methods - Part 47. Determination of the ash content of natural asphalts
  • BS EN 12697-1:2020 Tracked Changes. Bituminous mixtures. Test methods. Soluble binder content
  • BS EN 12697-39:2020 Tracked Changes. Bituminous mixtures. Test methods. Binder content by ignition

RO-ASRO, Sulfur content in asphalt

YU-JUS, Sulfur content in asphalt

Lithuanian Standards Office , Sulfur content in asphalt

  • LST EN 1428-2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
  • LST EN 12697-42-2021 Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt
  • LST EN 12697-42-2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
  • LST EN 12606-1-2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
  • LST EN 12606-2-2000 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction
  • LST EN 12697-47-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
  • LST EN 12697-14+AC-2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content
  • LST EN 12697-1-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
  • LST EN 12697-28-2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading
  • LST EN 12697-39-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition

Danish Standards Foundation, Sulfur content in asphalt

  • DS/EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
  • DS/EN 12697-42:2021 Bituminous mixtures – Test methods – Part 42: Amount of foreign matter in reclaimed asphalt
  • DS/EN 12697-42:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
  • DS/EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
  • DS/EN 12606-2:2000 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction
  • DS/EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
  • DS/EN 12697-14/AC:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content
  • DS/EN 12697-14:2000 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content
  • DS/EN 12697-1:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
  • DS/EN 12697-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading
  • DS/EN 12697-39:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition

AENOR, Sulfur content in asphalt

  • UNE-EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
  • UNE 104281-3-2:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS WATER CONTENT
  • UNE-EN 12697-42:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
  • UNE 104281-1-7:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS RAW MATERIALS AND MASTICS. TESTING METHODS. ASH CONTENT
  • UNE 104281-3-8:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. ASHES CONTENT (REFER TO NON VOLATILE MATTER)
  • UNE-EN 12606-2:2000 BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF THE PARAFIN WAS CONTENT. PART 2: METHOD BY EXTRACTION.
  • UNE-EN 12697-47:2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
  • UNE-EN 12697-14:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content
  • UNE 104281-6-13:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. FELTS, SHEETS, AND SHINGLES. TESTING METHODS. CINDERS CONTENT PERCENTAGE OF ASH
  • UNE-EN 12697-1:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
  • UNE-EN 12697-28:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading.
  • UNE-EN 12697-39:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition

Indonesia Standards, Sulfur content in asphalt

  • SNI 03-6894-2002 Test method for asphalt content from asphalt mixtures by centrifuge
  • SNI 03-3640-1994 Test method of asphalt content in asphalt mixture by extraction use soklet instrument
  • SNI 03-3641-1994 Test method for water content of emulsified asphalt
  • SNI 2490-2008 Testing methodes for water content of asphalt and material contain asphalt by using of destilation method
  • SNI 03-6833-2002 Test methods of inorganic materials or ash contents in asphalt
  • SNI 06-6875-2002 Test methods of sulphides content in water by iodometry

PT-IPQ, Sulfur content in asphalt

RU-GOST R, Sulfur content in asphalt

  • GOST 31735-2012 Bituminous materials. Determination of bitumen content
  • GOST 9090-2000 Petroleum paraffins. Method for determination of oil content
  • GOST 9090-1981 Petroleum wax. Methods for oil determination
  • GOST R ISO 10238-2015 Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Determination of sulfur content by an instrumental method
  • GOST 17789-1972 Petroleum bitumens. Method for determination of paraffin content
  • GOST 11504-1973 Petroleum bitumens. Method for determination of diluent quantity vaporized from liquid bitumens
  • GOST 28572-1990 Coal-pitch. Dielectric method for the determination of mass fraction of substances insoluble in quinoline
  • PNST 93-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Determination of binder content by ignition method
  • PNST 94-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Determination of binder content by extraction method
  • GOST 31738-2012 Bituminous paving mixtures. Determination of water and volatiles content
  • GOST 32055-2013 Petroleum products and bituminous materials. Determination of water content by distillation
  • GOST R 51946-2002 Petroleum products and bituminous materials. Method for determination of water by distillation

IN-BIS, Sulfur content in asphalt

ES-AENOR, Sulfur content in asphalt

Korean Agency for Technology and Standards (KATS), Sulfur content in asphalt

  • KS F 2354-2013(2018) Standard test method for asphalt content from asphalt paving mixtures
  • KS F 2354-2013 Standard test method for asphalt content from asphalt paving mixtures
  • KS F 2354-1982 Standard test method for asphalt content from asphalt paving mixtures
  • KS F 2490-2022 Standard test method for asphalt content of hot-mix asphalt by ignition method
  • KS F 2490-2016(2021) Standard test method for asphalt content of hot-mix asphalt by ignition method
  • KS M ISO 9055:2004 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
  • KS M ISO 9055-2004(2009) Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
  • KS M ISO 9055:2013 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
  • KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
  • KS F 2490-2006 Standard test method for asphalt content of hot-mix asphalt by ignition method
  • KS F 2490-2016 Standard test method for asphalt content of hot-mix asphalt by ignition method
  • KS M ISO 10238:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
  • KS M ISO 10238:2013 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
  • KS F 2365-1995 Testing Method for Quantitative Extraction of Bitumen from Bitminous Paving Mixtures
  • KS E 3706-1993 Determination of sulfur content in coal
  • KS M ISO 3733:2008 Petroleum products and bituminous materials-Determination of water-Distillation method
  • KS F 2372-2005 Standard test method for moisture or volatile distillates in asphalt paving mixtures
  • KS D 1803-2003 Methods for determination of sulfur in iron and steel
  • KS M 2103-2004 Analytical methods for determination of hydrogen sulfide in exhaust gas
  • KS M ISO 3423-2015(2020) Sulphuric acid and oleums for industrial use-Determination of sulphur dioxide content-Iodometric method
  • KS M 2303-2006 Methods for determination of carbon disulfide in exhaust gas
  • KS M ISO 12977:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of volatile matter content
  • KS M ISO 12977-2004(2019) Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of volatile matter content
  • KS M ISO 6376:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of content of toluene-insoluble material
  • KS M ISO 6791:2007 Determination of quinoline-insoluble(QI) material of pitch

KR-KS, Sulfur content in asphalt

未注明发布机构, Sulfur content in asphalt

  • NF T66-023*NF EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method.
  • DIN EN 12606-1:2000 Bitumen and bituminous binders Determination of the paraffin content Part 1: Distillation process
  • NF T66-049-1*NF EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1 : method by distillation

American Society for Testing and Materials (ASTM), Sulfur content in asphalt

  • ASTM D6307-05 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D6307-04 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D6307-10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D4125/D4125M-21 Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method
  • ASTM D4125/D4125M-10(2016) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
  • ASTM D4125-94(2000) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
  • ASTM D4125-05 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
  • ASTM D4125/D4125M-10 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
  • ASTM D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
  • ASTM D6307-19 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
  • ASTM D4-86(2004) Standard Test Method for Bitumen Content
  • ASTM D4074-91(2004) Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
  • ASTM D4074-91(1996)e1 Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
  • ASTM D4074/D4074M-11(2022) Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
  • ASTM D4074/D4074M-11 Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
  • ASTM UOP46-85 Paraffin Wax Content of Petroleum Oils and Asphalts
  • ASTM D4-86(2010) Standard Test Method for Bitumen Content
  • ASTM D4-86(2018) Standard Test Method for Bitumen Content
  • ASTM D2415-98(2008) Standard Test Method for Ash in Coal Tar and Pitch
  • ASTM D6307-05(2010) Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D4072-98(2018) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
  • ASTM D4074/D4074M-11(2015) Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
  • ASTM D4072-23 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
  • ASTM D2172-95 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
  • ASTM D2172-01e1 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
  • ASTM D2172-01 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
  • ASTM D2172-05 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
  • ASTM D2172/D2172M-11 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
  • ASTM D6307-98 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D2172/D2172M-17 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
  • ASTM D2318-98(2003) Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM D2318-98(2008) Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM D2318-14 Standard Test Method for Quinoline-Insoluble 40;QI41; Content of Tar and Pitch
  • ASTM D2318-14e1 Standard Test Method for Quinoline-Insoluble &40;QI&41; Content of Tar and Pitch
  • ASTM D2318-98(2013) Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM D95-99 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D95-99e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D4312-95a(2005) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D2318-15 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM UOP842-83 Nickel, Iron, Sulfur and Vanadium in Distillate, Residual Oils and Pitches by XRF
  • ASTM D4312-95a(2000)e1 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D4312-95a(2010) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D6847-02 Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • ASTM D4072-98(2003)e1 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
  • ASTM D1461-85(2006) Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
  • ASTM D1461-85(2001) Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
  • ASTM D95-05 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D95-05e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D4072-98 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
  • ASTM D4072-98(2008) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
  • ASTM D1461-11 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
  • ASTM D4072-98(2013) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
  • ASTM D95-13 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D95-23 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM PS136-02 Standard Provisional Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • ASTM D4312-15 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D2764-99(2004)e1 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
  • ASTM D2764-99(2009) Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
  • ASTM D2764-99 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
  • ASTM D4746-98(2008) Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
  • ASTM D4746-98(2013) Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
  • ASTM D2318-98 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM D2318-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM D4746-98 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
  • ASTM D4746-98(2003)e1 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
  • ASTM D4312-95a Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D4312-20 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D7280-06e1 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
  • ASTM D4746-14e1 Standard Test Method for Determination of Quinoline Insolubles &40;QI&41; in Tar and Pitch by Pressure Filtration

Japanese Industrial Standards Committee (JISC), Sulfur content in asphalt

HU-MSZT, Sulfur content in asphalt

CEN - European Committee for Standardization, Sulfur content in asphalt

  • PREN 16849-2015 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
  • EN 12697-1:2000 Bituminous Mixtures - Test Methods for Hot Mix Asphalt - Part 1: Soluble Binder Content
  • EN 12697-1:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
  • EN 12697-39:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
  • PREN 12697-14-2018 Bituminous mixtures - Test methods - Part 14: Water content
  • PREN 12697-1-2018 Bituminous mixtures - Test methods - Part 1: Soluble binder content

ES-UNE, Sulfur content in asphalt

  • UNE-EN 16849:2017 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
  • UNE-EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
  • UNE-EN 12697-42:2022 Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt
  • UNE-EN 12697-14:2022 Bituminous mixtures - Test methods - Part 14: Water content
  • UNE-EN 12697-1:2022 Bituminous mixtures - Test methods - Part 1: Soluble binder content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sulfur content in asphalt

  • GB/T 3816-1983 Determination of asphalt in montane wax
  • GB 9018.3-1988 Celestite ores--Determination of sulphate content--Barium sulphate gravimetric method
  • GB/T 26930.10-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 10:Determination of sulful content by an instrumental method
  • GB/T 26930.9-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 9:Determination of sulful content by the bomb method
  • GB/T 328.2-1989 Test methods for asphalt waterproof roll roofing--Saturated and coated bitumen amount of asphalt
  • GB/T 15252-1994 Rubber--Determination of sulfide sulfur content--Iodometric method
  • GB/T 2462-1996 Pyrites and concentrate--Determination of effective sulfur content--Combustion neutralization method
  • GB/T 16574-1996 Pyrites and concentrate--Determination of silicon content--Gravimetric method
  • GB/T 3514-1992 Rubber,Vulcanized-dtermination of free sulphur content Sodium sulphite method
  • GB/T 16575-1996 Pyrites and concentrate--Determination of aluminium content--EDTA volumetric method
  • GB/T 11198.1-1989 Sulphuric acid for industrial use--Determination of sulphuric acid content and calculation of free sulphur trioxide content of oleum--Titrimetric method
  • GB/T 2382-1995 Determination of content of free sulphur in sulphur dyes
  • GB/T 12211-1990 Determination of hydrogen sulfide of gas in urban area
  • GB/T 11060.1-1998 Natural gas--Determination of hydrogen sulfide content--Iodometric titration method
  • GB/T 2469-1996 Pyrites and concentrate--Determination of carbon content--Caustic asbestos gravimetric method
  • GB/T 2463.1-1996 Pyrites and concentrate--Determination of total iron content--Part 1: Cerium sulfate volumetric method
  • GB/T 14326-1993 Determination of carbon disulfide content in benzene
  • GB/T 14326-2009 Determination of carbon disulfide content in benzene
  • GB/T 19203-2003 Determination of calcium,magnesium and sulphur content for compound fertilizer
  • GB 9018.9-1988 Celestite ores--Determination of aluminium content--EDTA volumetric method
  • GB/T 2467.3-1996 Pyrites and concentrate--Determination of lead content--Part 3: EDTA volumetric method
  • GB/T 2463-2008 Pyrites and concentrate.Determination of total iron content.Cerium sulfate volumetric and potassium dichromate volumetric methods

AASHTO - American Association of State Highway and Transportation Officials, Sulfur content in asphalt

  • TP53-1997 Standard Test Method for Determining the Asphalt Content of Hot Mix Asphalt (HMA) by the Ignition Method
  • T 287-2014 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
  • T 287-2006 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
  • T 287-2005 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
  • T 308-2010 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
  • T 308-2008 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
  • T 308-2009 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
  • T 308-2016 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
  • TP 78-2009 Standard Specification for Detecting the Presence of Phosphorous in Asphalt Binder
  • TP53-1995 Standard Test Method for Determining the Asphalt Content of Hot Mix Asphalt (HMA) by the Ignition Method (First Edition)
  • T 164-2008 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • T 164-2010 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • T 164-2006 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
  • T 164-2013 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • T 164-2014 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • T 164-2011 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • T 308-2005 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method
  • T 308-2004 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method
  • T 287-2004 Standard Method of Test for Asphalt Binder Content of Asphalt Concrete Mixtures by the Nuclear Method
  • TP2-1994 Standard Test Method for the Quantitative Extraction and Recovery of Asphalt Binder from Hot Mix Asphalt (HMA)
  • T 319-2003 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • T 319-2014 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • T 319-2008 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • T 302-2005 Standard Method of Test for Polymer Content of Polymer- Modified Emulsified Asphalt Residue and Asphalt Binders
  • T 308-2001 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method (HM-22; Part IIA)
  • T 164-1997 Standard Method of Test for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (Twentieth Edition; ASTM D2172-88)
  • T 164-2005 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA) (ASTM Designation: D 2172-01)
  • T287-1993 Standard Method of Test for Asphalt Cement Content of Asphalt Concrete Mixtures by the Nuclear Method (Eighteenth Edition; ASTM D4125-92)
  • T 329-2005 Standard Method of Test for Moisture Content of Hot-Mix Asphalt (HMA) by Oven Method
  • T 329-2013 Standard Method of Test for Moisture Content of Hot Mix Asphalt (HMA) by Oven Method
  • T 329-2008 Standard Method of Test for Moisture Content of Hot Mix Asphalt (HMA) by Oven Method
  • TP2-2001 Standard Test Method for the Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures (2000 Edition; Interim Edition 4/2001)
  • T 164-2001 Standard Method of Test for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (HM-22; Part IIA; ASTM Designation: D 2172-88)

IT-UNI, Sulfur content in asphalt

Professional Standard - Petroleum, Sulfur content in asphalt

  • SY/T 7550-2000 Determination of wax,resins and asphaltenes contents in crude oil
  • SY/T 7550-2012 Determination of wax, resins and asphaltenes in crude oil
  • SY 7550-2012 Determination of Wax, Colloid and Asphaltene Content in Crude Oil
  • SY/T 7550-2004 Determination method of wax, colloid and asphaltenes in crude oil

国家石油和化学工业局, Sulfur content in asphalt

  • SY/T 7550-1999 Determination of wax, gum and asphaltene content in crude oil

CH-SNV, Sulfur content in asphalt

Standard Association of Australia (SAA), Sulfur content in asphalt

  • AS/NZS 2891.10:2015
  • AS/NZS 2891.3.1:1997 Methods of sampling and testing asphalt - Bitumen content and aggregate grading - Reflux method
  • AS/NZS 2891.3.2:1997 Methods of sampling and testing asphalt - Bitumen content and aggregate grading - Centrifugal extraction method
  • AS/NZS 2891.3.3:1997 Methods of sampling and testing asphalt - Bitumen content and aggregate grading - Pressure filter method
  • AS 2891.10:2005 Methods of sampling and testing asphalt - Water and volatile oils content

The American Road & Transportation Builders Association, Sulfur content in asphalt

  • AASHTO T 287-2014 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
  • AASHTO T 308-2010 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
  • AASHTO T 308-2008 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
  • AASHTO T 287-2006 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
  • AASHTO T 319-2008 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • AASHTO T 308-2001 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method HM-22; Part IIA
  • AASHTO T 164-2010 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • AASHTO T 164-2013 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • AASHTO T 164-2014 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • AASHTO T 319-2003 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • AASHTO T 55-2002 Standard Method of Test for Water in Petroleum Products and Bituminous Materials by Distillation
  • AASHTO T 110-2003 Standard Method of Test for Moisture or Volatile Distillates in Hot-Mix Asphalt (HMA)
  • AASHTO T 164-2008 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
  • AASHTO T 329-2008 Standard Method of Test for Moisture Content of Hot Mix Asphalt (HMA) by Oven Method
  • AASHTO T 319-2014 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • AASHTO T 319-2015 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
  • AASHTO T 302-2005(R2009) Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
  • AASHTO T 302-2015 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
  • AASHTO T 302-2005 Standard Method of Test for Polymer Content of Polymer-Modified Emulsified Asphalt Residue and Asphalt Binders
  • AASHTO T 287-1997 Standard Method of Test for Asphalt Cement Content of Asphalt Concrete Mixtures by the Nuclear Method HM-22; Part IIA; ASTM Designation D 4125-92 R(2001)
  • AASHTO T 329-2013 Standard Method of Test for Moisture Content of Hot Mix Asphalt (HMA) by Oven Method
  • AASHTO T 329-2015 Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method

Professional Standard - Chemical Industry, Sulfur content in asphalt

  • HG/T 2958.3-1988 Celestite ores-Determination of sulphate content-Barium sulphate gravimetric method
  • HG/T 2957.4-2004 Determination of sulfate sulfur content in alunite ore barium sulfate gravimetric method
  • HG/T 2964-1984 Sodium hydrosulphide for industrial use-Determination of the content of sodium hydrosulphide ane sulphide
  • HG/T 2958.9-1988 Celestite ores-Determination of aluminium content-EDTA volumetric method
  • HG/T 2428-1993 Determination of strontium carbonate content in celestite ore

CU-NC, Sulfur content in asphalt

  • NC 54-196-1985 Construction Materials and Products. Asphaltic Concrete Determination of Asphalt Content

AR-IRAM, Sulfur content in asphalt

Zhejiang Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB33/T 989-2015 Determination of SBS Content in Modified Asphalt by Infrared Spectroscopy

UY-UNIT, Sulfur content in asphalt

BR-ABNT, Sulfur content in asphalt

Professional Standard - Traffic, Sulfur content in asphalt

ZA-SANS, Sulfur content in asphalt

Professional Standard - Petrochemical Industry, Sulfur content in asphalt

  • SH/T 0425-2003 Test method for wax content of asphalts
  • SH/T 0266-1992 Petroleum Asphaltene Content Determination Method
  • SH/T 0099.15-2005 Determination of water content in asphalt emulsions by distillation
  • SH/T 0099.4-2005 Determination of residue by evaporation of emulsified asphalt
  • SH/T 0778-2005 Determination of paraffin wax content of asphalts by cracking and deoiling method
  • SH/T 0099.17-2005 Determination of residue and oil distillate in asphalt emulsions by distillation
  • SH/T 0303-1992 Determination of Sulfur Content in Additives (Electrometry)
  • SH/T 0099.16-2005 Determination of residue in asphalt emulsions by low-temperature vacuum distillation

National Metrological Verification Regulations of the People's Republic of China, Sulfur content in asphalt

Professional Standard - Energy, Sulfur content in asphalt

International Organization for Standardization (ISO), Sulfur content in asphalt

  • ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
  • ISO 9055:1988 Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method
  • ISO 3733:1976 Petroleum products and bituminous materials; Determination of water; Distillation method
  • ISO 8054:1996 Rubber, compounded or vulcanized - Determination of sulfide sulfur content - Iodometric method

Hubei Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB42/T 1045-2015 Technical specification for high solid content emulsified medium temperature asphalt pavement

Jiangsu Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB32/T 3566-2019 Technical specification for detection of SBS modifier content in asphalt pavement modified asphalt

PL-PKN, Sulfur content in asphalt

  • PN C04109-1991 Petroleum products. Determination of paraffin content in bitumen
  • PN-EN 12697-42-2021-06 E Bituminous mixtures -- Test methods -- Part 42: Amount of foreign matter in reclaimed asphalt
  • PN C04137-1972 Petroleum products Determinat?on of phenols content in cutback bitumen for insulating purposes
  • PN A75022-1962 Food products Determina?ion o{ sulphur dioxide content
  • PN C04288-13-1987 Technical fats Methods of testing Determination of sulphur content
  • PN H04805-13-1991 Zinc powder Determination of sulfate content
  • PN C04053-1971 Petroleum produc?s Defermination of mercap?an sulphur conten? in mo?or fuels

Jilin Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB22/T 3148-2020 Detection of SBS Modifier Content in Modified Asphalt by Infrared Spectroscopy

Group Standards of the People's Republic of China, Sulfur content in asphalt

  • T/CACE 008-2016 High content vulcanized crumb rubber modified asphalt for pavement
  • T/CACE 008-2017 High content vulcanized rubber powder modified asphalt for road
  • T/HBJLXH 003-2023 Calibration method for asphalt wax content tester
  • T/HBBWA 61-2019 Test Method for dissoluble composite of membrane of asphalt waterproofing membrane
  • T/CWA 301-2019 Test methods for root retardants content in asphalt waterproof sheets of resistance to root penetration
  • T/CBMF 49*T/CWA 301-2019 Test method for content of anti-rooting agent in asphalt-based root puncture-resistant waterproofing membrane

GOSTR, Sulfur content in asphalt

  • GOST R 58952.5-2020 Automobile roads of general use. Road bituminous emulsions. Method for determination of binder content in bitumen emulsion
  • GOST R 58401.8-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determination of air voids content
  • GOST R 58401.19-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Determination of binder content by extraction method
  • GOST R 58401.15-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Determination of binder content by ignition method

(U.S.) Ford Automotive Standards, Sulfur content in asphalt

Shandong Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB37/T 4417-2021 Determination of SBR content in SBR modified emulsified asphalt (infrared spectroscopy)
  • DB37/T 2735-2015 Determination of ammonium sulfate content in dry powder fire extinguishing agent Total nitrogen content method
  • DB37/T 2977-2017 Technical Regulations for Determination of SBS Modifier Content in Road Asphalt (Infrared Spectroscopy)

Jiangxi Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB36/T 1131-2019 Determination of SBS and SBR Modifier Content in Modified Asphalt by Infrared Spectroscopy

Professional Standard - Ferrous Metallurgy, Sulfur content in asphalt

  • YB/T 031-1992 Method for determination of naphthalene content in coal tar pitch road oil
  • YB/T 031-2012 Determination of the naphthalene content of coal tar pitch for road by gas chromatography
  • YB/T 5178-2016 Feedstock oil for carbon black.Determination of asphaltine content.Precipitation of n-heptane

Shaanxi Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB61/T 1286-2019 Titration method for testing the content of SBS in modified asphalt

VN-TCVN, Sulfur content in asphalt

  • TCVN 7503-2005 Bitumen.Determination of the paraffin wax content by distillation
  • TCVN 3750-1983 Petroleum and petroleum products.Method for the determination of asphaltic resinous substance content

国家能源局, Sulfur content in asphalt

  • NB/SH/T 0990-2019 Determination of emulsified asphalt residue content Moisture meter method

国家市场监督管理总局、中国国家标准化管理委员会, Sulfur content in asphalt

  • GB/T 38396-2019 Pitch products of coal carbonization—Determination of mesophase content—Microscopical analysis by reflected light

BE-NBN, Sulfur content in asphalt

  • NBN I-912-1968
  • NBN T 03-016-1979 Sulphuric acid and oleum for industrial use - Determination of total acidity, and calculation of free sulphure trioxide content of oleum - Titrimetric method

工业和信息化部, Sulfur content in asphalt

  • YB/T 4824-2020 Determination of 3,4-benzopyrene content in coal pitch by gas chromatography

Liaoning Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB21/T 2778-2017 Technical specification for detection of SBS modifier content in road modified asphalt

Gansu Provincial Standard of the People's Republic of China, Sulfur content in asphalt

  • DB62/T 4344-2021 Technical specification for detection of SBS modifier content in road modified asphalt

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sulfur content in asphalt

交通运输部, Sulfur content in asphalt

  • JT/T 1329-2020 Test method for modifier content of SBS modified asphalt by infrared spectroscopy

Professional Standard - Environmental Protection, Sulfur content in asphalt

  • HJ/T 45-1999 Stationary source emission.Determination of asphaltic smoke.Gravimetric method

Professional Standard - Commodity Inspection, Sulfur content in asphalt

  • SN/T 1083.3-2002 Determination of sulfur content in coke.Instrumental method
  • SN/T 3936-2014 Determination of sodium sulfide in gourmet powder for export
  • SN/T 3598-2013 Determination of sulfur content in pyrites ore.High frequency combustion with infrared absorption method

Professional Standard - Coal, Sulfur content in asphalt

  • MT/T 802.4-1999 Determination of arsenic of pyirte and concentrated pyrite in coal seam

International Truck and Engine Corporation (ITEC), Sulfur content in asphalt

CO-ICONTEC, Sulfur content in asphalt

VE-FONDONORMA, Sulfur content in asphalt





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved