ZH
RU
ES

mesh and micron

mesh and micron, Total:30 items.

In the international standard classification, mesh and micron involves: Optical equipment, Linear and angular measurements, Products of the chemical industry, Test conditions and procedures in general, Integrated circuits. Microelectronics, Construction materials.

RU-GOST R, mesh and micron

• GOST 3361-1975 Eyepieces and body-tubes of the microscopes. Attaching dimensions
• GOST 8.211-1984 State system for ensuring the uniformity of measurements. Ocular screw micrometer. Methods and means of verification

Military Standard of the People's Republic of China-General Armament Department, mesh and micron

• GJB 6182-2007 The radiation measuring methods of targets on microwave or millimeter wave in near field
• GJB 6182A-2021 Target and its environment near-field microwave; millimeter wave radiation characteristics test method

Korean Agency for Technology and Standards (KATS), mesh and micron

• KS M ISO 8220:2003 Aluminium oxide primarily used for the production of aluminium-Determination of the fine particle size distribution (less than 60 ㎛)-Method using electroformed sieves

(U.S.) Ford Automotive Standards, mesh and micron

• FORD SK-M99J9587-D-2006 PRIMER, STONE CHIP PROTECTION, 50 MICROMETER ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M6J166-A-2012 PRIMER, REPAIR, STONE CHIP PROTECTION, 120 MICROMETRE, WATER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSK-M6J157-B-2012 PRIMER, ADHESION, ONE PACK, 15 MICROMETRE FILM BUILD, POLYPROPYLENE ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD SK-M99J9587-E-2006 PRIMER, STONE CHIP PROTECTION, 50 MICROMETER, LOW BAKE ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M6J157-C-2013 PRIMER, ADHESION, ONE PACK, PREPRIMED PLASTIC PARTS, 5-15 MICROMETER ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESB-M99J344-A-2006 CHIP RESISTANT COATING, ONE COMPONENT, PAINTABLE - NON-MASKING - 38 MICROMETRE MINIMUM FILM THICKNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESZ-M64J26-A1-2012 PRIMER, WATERBORNE CATIONIC ELECTROCOAT - 20 MICROMETRE FILM BUILD, INITIAL FILL, BLACK, LOW SOLIDS TYPE ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD ESZ-M64J26-A2-2012 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD ESZ-M64J26-A1
• FORD WSB-M64J28-A2-2003 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M64J28-A1
• FORD WSB-M64J28-C2-2003 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M64J28-A1
• FORD WSB-M64J28-A1-2010 PRIMER, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, INITIAL FILL, BLACK, 180 DEGREES C BAKING TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSB-M64J28-A2-2010 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSB-M64J28-A1
• FORD WSB-M64J28-C2-2010 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSB-M64J28-A1
• FORD WSK-M64J29-C1-2012 PRIMER, WATERBORNE CATHODIC ELECTROCOAT, 25 MICROMETRE FILM BUILD, GRAY, 175 C BAKING TEMPERATURE, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M64J29-A1)
• FORD WSB-M64J28-C1-2012 PRIMER, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, INITIAL FILL, GRAY, 180 癈 BAKING TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSB-M64J28-A1

International Organization for Standardization (ISO), mesh and micron

• ISO 8220:1986 Aluminium oxide primarily used for the production of aluminium; Determination of the fine particle size distribution (less than 60 mu/m); Method using electroformed sieves

Association for Information and Image Management (AIIM), mesh and micron

• AIIM MS24-1996 Standard Test Target for Use in Microfilming Source Document Engineering Graphics on 35 mm Microfilm

ETSI - European Telecommunications Standards Institute, mesh and micron

• GR MWT 016-2017 Applications and use cases of Software Defined Networking (SDN) as related to microwave and millimetre wave transmission (V1.1.1)

Group Standards of the People's Republic of China, mesh and micron

• T/BSPT 002-2018 Micro/nano fabrication The fabrication of 3D nanostructures formed by strain via ion beam irradiation

Defense Logistics Agency, mesh and micron

• DLA SMD-5962-77046 REV F-2005 MICROCIRCUIT, DIGITAL, CMOS, QUAD 2-INPUT NAND GATE WITH SCHMITT TRIGGERS, MONOLITHIC SILICON
• DLA SMD-5962-89845 REV C-2002 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, QUAD 2-INPUT NAND SCHMITT TRIGGER, MONOLITHIC SILICON
• DLA SMD-5962-94559 REV A-1994 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, DUAL 4-INPUT NAND SCHMITT TRIGGER, MONOLITHIC SILICON

Professional Standard - Agriculture, mesh and micron

• 139兽药典 三部-2015 Text Contents Diagnostic Products Mycoplasma Pneumonia Micro-indirect Hemagglutination Test Antigen, Positive Serum and Negative Serum

Standard Association of Australia （SAA）, mesh and micron

• AS 3583.1:1998/Amdt 1:2007
• AS 3583.1:1998 Methods of test for supplementary cementitious materials for use with portland and blended cement - Determination of fineness by the 45 micrometre sieve

Others:   Mesh to Micron Conversion, Mesh micron conversion, Mesh micron, Mesh micron conversion, Particle size micron, 500 mesh a few microns, mesh and micron, Micron mesh, Micron mesh, Particle mesh micron, micron and mesh, Mesh micron conversion, Micron Mesh Conversion, Mesh micron, micron mesh, Micron to Mesh Conversion, Mesh micron conversion, mesh and micron, micron+mesh+, Micron Conversion Mesh.