ZH
RU
ES

Cupping test test equipment

Cupping test test equipment, Total:496 items.

In the international standard classification, Cupping test test equipment involves: Protection against fire, Petroleum products in general, Lubricants, industrial oils and related products, Fuels, Sensory analysis, Wastes, Analytical chemistry, Paints and varnishes, Installations in buildings, Electromechanical components for electronic and telecommunications equipment, Linear and angular measurements, Gears, Mechanical testing, Environmental testing, Electricity. Magnetism. Electrical and magnetic measurements, Radiation measurements, Radiation protection, Road vehicle systems, On-board equipment and instruments, Electrical accessories, Diagnostic, maintenance and test equipment, Electrical and electronic testing, Hydraulic construction, Non-destructive testing, Measurement of volume, mass, density, viscosity, Road vehicles in general, Optics and optical measurements, Test conditions and procedures in general, Thermodynamics and temperature measurements, Measurement of force, weight and pressure, Optical equipment, Nuclear energy engineering, Testing of metals, Earthworks. Excavations. Foundation construction. Underground works, Vibrations, shock and vibration measurements, Equipment for petroleum and natural gas industries, Rubber, Rectifiers. Convertors. Stabilized power supply, Plastics, Geology. Meteorology. Hydrology, Products of the textile industry, Occupational safety. Industrial hygiene, Waxes, bituminous materials and other petroleum products, Shipbuilding and marine structures in general, Rubber and plastics products, Packaging and distribution of goods in general, Packaging materials and accessories, Data storage devices, Paper products, Standardization. General rules, Measurement of time, velocity, acceleration, angular velocity, Inks. Printing inks, Construction materials, Electrical wires and cables, Power stations in general, Power transmission and distribution networks, Surface treatment and coating, Ceramics, Software development and system documentation, Textile fibres, Medical equipment, Vocabularies, Protective equipment, Metrology and measurement in general, Semiconductor devices, Fluid storage devices, Milk and milk products, Acoustics and acoustic measurements, Electromagnetic compatibility (EMC), Protection of and in buildings, Seals, glands, Shafts and couplings, Electrical engineering in general, Metalliferous minerals, Fruits. Vegetables.

German Institute for Standardization, Cupping test test equipment

DIN 10960:2000-06 Apparatus for sensory analysis - Wine testing glasses
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003
DIN EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
DIN 45669-3:2006 Measurement of vibration immission - Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ
DIN 53523-2:1991 Determination of Mooney viscosity of rubber; test apparatus
DIN 43743:1977 Stabilized supply apparatus for measurement; definitions, expression and testing of performance
DIN ISO 16331-1:2020-09 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
DIN EN ISO 376:2011-09 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011); German version EN ISO 376:2011 / Note: DIN EN ISO 376 (2005-02) remains valid alongside this standard until 2011-12-31.
DIN EN 61143-2:1995 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods (IEC 61143-2:1992); German version EN 61143-2:1994
DIN ISO 16331-1:2020 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
DIN EN 60512-16-5:2009 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN 60512-16-5:2008
DIN ISO 9370:2018 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method (ISO 9370:2017); Text in German and English
DIN 43751-4:1990 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details
DIN EN ISO 179-1:2006 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd.1:2005); German version EN ISO 179-1:2000 + A1:2005
DIN EN 50267-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus; German version EN 50267-1:1998
DIN EN ISO 179-2:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
DIN EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999
DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010 / Note: To be replaced by DIN EN ISO 179-1 (2022-05).
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN ISO 4787:2022-03 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021); German version EN ISO 4787:2021
DIN IEC 62088:2002 Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures (IEC 62088:2001)
DIN 10478:2003 Determination of ingredients of raw milk using infra-red spectrophotometry - Function test of the instruments
DIN EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/DIS 4787:2021); German and English version prEN ISO 4787:2021
DIN 2271:2016 Geometrical product specifications (GPS) - Pneumatic length measurement - Characteristics of instruments, requirements, testing
DIN EN 60051-9:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 9: recommended test methods (IEC 60051-9:1988, edition 4); german version EN 60051-9:1989
DIN EN ISO 105-A06:1997 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour (ISO 105-A06:1995); German version EN ISO 105-A06:1997
DIN 3761-5:1984 Rotary shaft lip type seals for automobils; test; measuring requirements and -instruments
DIN EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000
DIN EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15); German version EN ISO 4787:2011

PL-PKN, Cupping test test equipment

PN E88608-1992 Electrical disturbance tests for measuring relays and protection equipment 1 MHz burst disturbance tests
PN E08120-1986 Electrical measuring instruments Safety requirements and tests
PN M53864-1985 Electrical temperatur? measuring instruments and their accessories Requirements and tests
PN S95021-1991 Measuring instruments for motor vehicles. Tachometers. Requirements and tests
PN C12330-1965 Laboratory porcelainware and rela?ed appara?us Ouality specifica?ions and ?es? methods
PN T05128-1988 Electromechanical components tor electronic e?uipment; basie testing procedures and measuring methods Connector tests (mechanical) and mechanical tests on contacts and terminations
PN T06513-03-1989 Redox potential value Laboratory measuring instruments General reguirements and tests
PN E06737-1991 Rotating electrical machines. Test methods and apparatus for the measurement of the operational characteristics of brushes
PN B04482-1989 Apparatus lor laboratory shear strcngith tcsting of soils willi de lined shear surlaee General technical requirenents
PN C04046-1965 Petroleum products Me?hod of ?es? for filtration of engine fulels by AzNII-FT-2 I appara?us

American Society for Testing and Materials (ASTM), Cupping test test equipment

ASTM D93-06 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D93-13 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D93-13e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D56-21 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-21a Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D6450-16a(2021) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D6450-99 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D6450-16a Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D7094-04 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D6450-12e1 Standard Test Method for Flash Point by Continuously Closed Cup 40;CCCFP41; Tester
ASTM D7094-04(2009) Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D7236-16a Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D93-10 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D6450-05(2010) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D93-00 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D93-02a Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D93-10a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D7094-12e1 Standard Test Method for Flash Point by Modified Continuously Closed Cup 40;MCCCFP41; Tester
ASTM D3828-07 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-07a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D6450-12 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D3828-98 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D3828-02 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828-97 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D3828-16a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D8174-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
ASTM D8175-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
ASTM D56-05 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D3828-12 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D6450-05 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM D7236-07(2013) Standard Test Method for Flash Point by Small Scale Closed Cup Tester lpar;Ramp Methodrpar;
ASTM D7236-07 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM D93-07 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D93-11 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D92-05 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-05a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D7094-12 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D93-15a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D93-16 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D93-12 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D92-12a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-12 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM E499-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D5373-08 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
ASTM D3469-97 Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
ASTM D3469-97(2002) Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
ASTM D346-90(1998) Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D3469-97(2007) Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
ASTM F2824-10 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM F2824-10e1 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM E74-00a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
ASTM D5373-93(2002) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5373-93(1997) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5373-16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
ASTM D6531-00 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM C204-00 Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
ASTM D6531-00(2005) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM C204-05 Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
ASTM D7528-09 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D6531-00(2010) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM D7528-13 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
ASTM D5581-06 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D5373-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5373-02(2007) Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
ASTM D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D5767-95(2004) Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
ASTM C204-11 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM E1133-86(1996)e1 Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM E1133-86(2016) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
ASTM D5867-12(2020) Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
ASTM D6531-00(2019) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D6537-00(2021) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM D5291-01 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D5867-12 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D5867-12e1 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM D5291-10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D6166-12 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D5767-17 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces

AT-ON, Cupping test test equipment

ONORM C 1122-1970 Testing of Mineral Oils; Flash Point by Pensky-Martens Closed Tester
OENORM EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/DIS 4787:2021)

YU-JUS, Cupping test test equipment

JUS H.P8.501-1983 Testing of pesticides. Determination for flash point by Pensky-Martens closed tester
JUS N.A5.041-1987 Verification mechanical strength resistance ageinst impact. Impact-test apparatus
JUS N.A5.044-1988 Verification mechanical strength resistance against inpact. Sprlng-operate? impact-te?t apparatvs

RU-GOST R, Cupping test test equipment

GOST 34238-2017 Petroleum products. Methods for determination of flash point by small scale closed cup tester
GOST 25258-1982 Electrometric measurement means. Acceptance rules and test methods
GOST 25651-2015 Testing and measuring instruments for vehicles. Technical requirements and test methods
GOST R EN ISO 2719-2008 Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup
GOST R ISO 17123-4-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 4. Elektro-optical distance meters (EDM instruments)
GOST R ISO 17123-7-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 7. Optical plumbing instruments
GOST 31418-2010 Environmental dynamic test methods for machines, instrument and other technical articles. Shock tests with shock response spectrum synthesis
GOST R ISO 17123-2-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 2. Levels
GOST R ISO 17123-3-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 3. Theodolites
GOST R 51369-1999 Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST R 51371-1999 Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks
GOST R 51370-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for influence of solar radiation
GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R 50355-1992 Digital instruments to measure immittance parameters. General technical requirements and methods of tests
GOST R ISO 17123-1-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
GOST 8.619-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of breakthrough time for respiratory protective devices gas filters. Verification method
GOST R 8.908-2015 State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers
GOST R ISO 10140-5-2012 Acoustics. Laboratory measurement of sound insulation of building elements. Part 5. Requirements for test facilities and equipment

British Standards Institution (BSI), Cupping test test equipment

19/30394128 DC BS EN 13523-6. Coil coated metals. Test methods. Part 6. Adhesion after indentation (cupping test)
BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
BS EN 60255-22-1:2005 Electrical relays - Part 22-1: Electrical disturbance tests for measuring relays and protection equipment-1 MHz burst immunity tests
BS ISO 6487:2015+A1:2017 Road vehicles. Measurement techniques in impact tests. Instrumentation
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments
BS ISO 6487:2015 Road vehicles. Measurement techniques in impact tests. Instrumentation
BS ISO 6487+A1:2002 Road vehicles. Measurement techniques in impact tests. Instrumentation
BS ISO 6487:2012 Road vehicles. Measurement techniques in impact tests. Instrumentation
BS 5548:1978 Specification for radiation detectors for the instrumentation and protection of nuclear reactors: characteristics and test methods
BS EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
BS ISO 16331-1:2012 Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Instrumented impact test
BS EN ISO 179-2:1999+A1:2012 Plastics. Determination of Charpy impact properties. Instrumented impact test
BS ISO 8721:2018 Road vehicles. Measurement techniques in impact tests. Optical instrumentation
ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
BS ISO 16331-1:2017 Tracked Changes. Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
BS 2782-3 Method 352F:1996 Methods of testing plastics - Mechanical properties - Determination of impact resistance by the free-falling dart method (instrumented puncture test)
BS ISO 9370:1997 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
BS IEC 60515:2007 Nuclear power plants - Instrumentation important to safety - Radiation detectors - Characteristics and test methods
BS EN ISO 18563-1:2022 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment - Instruments
BS EN ISO 105-A05:1997 Textiles. Tests for colour fastness. Instrumental assessment of change of colour for determination of grey scale rating
BS EN ISO 105-A06:1997 Textiles. Tests for colour fastness. Instrumental determination of 1/1 standard depth of colour
BS EN ISO 14556:2023 Tracked Changes. Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
18/30363675 DC BS EN ISO 22232-1. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Part 1. Instruments
BS ISO 9370:2017 Tracked Changes. Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
BS DD CEN/TS 1071-7:2003 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of hardness and Young's modulus by instrumented indentation testing
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests. Requirements for software for tests with impulse voltages and currents
BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing
BS AU 228-1b:2002 Impact tests on road vehicles - Specification for measurement techniques and general instrumentation
BS DD IEC TS 62370:2004 Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatability requirements and test procedures
BS EN ISO 6603-1:2000 Plastics - Determination of multi-axial impact behaviour of rigid plastics - Non-instrumented impact testing
BS IEC 61468:2021 Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation: Characteristics and test methods of self-powered neutron detectors
BS EN 55016-1-5:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz
BS EN 55016-1-5:2005 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antenna calibration test sites for 30 MHz to 1000 MHz
BS EN 50399:2011+A1:2016 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
BS EN 50399:2011 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
BS IEC 61336:1998 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods
BS AU 228-2:1989 Impact tests on road vehicles - Specification for measurement techniques using optical instrumentation
21/30429405 DC BS EN ISO 4787. Laboratory glass and plastic ware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 4787:2021 Tracked Changes. Laboratory glass and plastic ware. Volumetric instruments. Methods for testing of capacity and for use

VN-TCVN, Cupping test test equipment

TCVN 2693-2007 Petroleum Products.Test methods for determination of flash point by Pensky-Martens closed cup tester
TCVN 6608-2010 Standard tests method for flash point by small scale closed cup tester
TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use
TCVN 5236-2002 Textiles.Tests for colour fastness.Part J02: Instrumental assessment of relative whiteness

Professional Standard - Machinery, Cupping test test equipment

JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument
JB/T 6214-1992 Guideline for reliability validation test and determination test (exponential distribution) for instrumentation
JB/T 6214-2014 Guideline for reliability validation test and determination test (exponential distribution) for instrumentation
JB/T 7406.2-1994 Testing machine terminology - Non-destructive test instrument
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
JB/T 7479-1994 Meteorological contact thermometry - Test general
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 10059-1999 Modeling method for testing machines and non-destructive testing instruments
JB/T 5464-1991 Technical requirement and test method for reliability of electronic magnetometer

American National Standards Institute （ANSI), Cupping test test equipment

ANSI/ASTM D93:2006 Test Methods for Flash-point by Pensky-Martens Closed Cup Tester
ANSI N323A-1997 Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments
ANSI N323A/B-2013 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI/EIA 364-99:1999 Gage Location and Retention Test Procedure for Electrical Connectors
ANSI N323B-2003 Installed Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments for Near Background Operation
ANSI/ASTM E2307:2010 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-Story Test Apparatus
ANSI/ISO 2690:1997 Unrecorded Magnetic Tapes for Instrumentation Applications - Physical Properties and Test Methods
BS EN ISO 179-1:2023 Plastics. Determination of Charpy impact properties Non-instrumented impact test (British Standard)
ANSI/NEMA ICEAT-27-581-2008 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test

CZ-CSN, Cupping test test equipment

CSN 65 6065 Z1-1995 Petroleum products. Flash point by the closed cup tester according to Abel-Pensky
CSN 65 6065-1983 Petroleum products. lash point by the closed up tester according to bel-Pensky
CSN 35 6501-1984 Electronic measuring Instruments. Safety requirements and test methods
CSN ON 35 6208-1968
CSN 35 6513-1983 Electronic measuring instruments. General requirements for packing, marking, transport, storage and test methods

Korean Agency for Technology and Standards (KATS), Cupping test test equipment

KS C IEC 60512-6-2:2003 Connectors for electronic equipment-Tests and measurements-Part 6-2:Dynamic stress tests-Test 6b:Bump
KS C IEC 60512-6-2:2014 Connectors for electronic equipment－Tests and measurements－Part 6－2：Dynamic stress tests－Test 6b：Bump
KS R 1158-2012 Characteristics of measuring instruments for the collision test
KS R 1158-2002(2007) Characteristics of measuring instruments for the collision test
KS C IEC 60255-22-1-2005(2015) Electrical disturbance tests for measuring relays and protection equipment－Part 1：1 MHz burst disturbance tests
KS C IEC 61083-1:2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS C IEC 61083-1-2006(2021) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS C IEC 61083-1:2006 Instruments and software used for measurement in High-voltage impulse tests－Part 1：Requirements for instruments
KS R ISO 6487:2006 Road vehicles－Techniques of measurement inimpact tests－Instrumentation
KS R ISO 6487-2017(2022) Road vehicles — Techniques of measurement inimpact tests — Instrumentation
KS R ISO 6487:2017 Road vehicles — Techniques of measurement inimpact tests — Instrumentation
KS B ISO 10109-7:2004 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-7-2004(2019) Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS C IEC 61143-2-2013(2018) Electrical measuring instruments－X-t recorders－Part 2：Recommended additional test methods
KS R ISO 8721:2008 Road vehicles-Measurement techniques in impact tests-Optical instrumentation
KS R ISO 8721-2014(2019) Road vehicles — Measurement techniques in impact tests — Optical instrumentation
KS R ISO 8721:2014 Road vehicles — Measurement techniques in impact tests — Optical instrumentation
KS B ISO 12710:2005 Non-destructive testing－Ultrasonic inspection－Evaluating electronic characteristics of ultrasonic test instruments
KS P ISO 20776-2:2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
KS K ISO 105-A06:2008 Textiles-Tests for colour fastness-Instrumental determination of 1/1 standard depth of colour
KS M 3088-2009 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS M ISO 179-2-2012(2022) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS C IEC 60515-2012(2022) Nuclear power plants－Instrumentation important to safety－ Radiation detectors－Characteristics and test methods
KS C IEC 60515-2012(2017) Nuclear power plants－Instrumentation important to safety－ Radiation detectors－Characteristics and test methods
KS K ISO 105-A06:2014 Textiles — Tests for colour fastness — Instrumental determination of 1/1 standard depth of colour
KS M ISO 179-2-2012(2017) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS B 0951-2008(2018) Instrumented indentation tests on welds in steel－Measurement of residual stress on welded joints
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS B ISO 14997:2004 Optics and optical instruments-Test methods for surface imperfections of optical elements
KS B ISO 14997:2014 Optics and optical instruments — Test methods for surface imperfections of optical elements
KS M ISO 179-2:2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 179-1-2012(2017) Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
KS M ISO 179-1:2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS C IEC 61468-2006(2016) Nuclear power plants－In-core instrumentation－Characteristics and test methods of self-powered neutron detectors
KS C IEC 61468:2006 Nuclear power plants－In-core instrumentation－Characteristics and test methods of self-powered neutron detectors
KS M ISO 6603-2:2002 Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS F 2335-1995 Testing methods for resistance to deformation and cohesion of bituminous mixtures by means of Hveem apparatus
KS C IEC 61468-2006(2021) Nuclear power plants－In-core instrumentation－Characteristics and test methods of self-powered neutron detectors
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS C IEC 61083-2:2019 Instruments and software used for measurement in high-voltage and highcurrent tests – Part 2: Requirements for software for tests with impulse voltages and currents
KS M 2418-2006(2016) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
KS M ISO 6603-2-2002(2022) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing
KS C IEC TS 62370-2017(2022) Electroacoustics — Instruments for the measurement of sound intensity — Electromagnetic and electrostatic compatibility requirements and test procedures
KS M 2418-2006(2021) Standard test method for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
KS M ISO 6603-2-2002(2017) Plastics－Determination of puncture impact behaviour of rigid plastics－Part 2：Instrumented impact testing

(U.S.) Ford Automotive Standards, Cupping test test equipment

FORD FLTM BJ 110-04-2001 ALUMINUM BEAKER OXIDATION TEST PART I - APPARATUS AND PROCEDURES (Replaces FLTM BJ 010-04)

Military Standard of the People's Republic of China-General Armament Department, Cupping test test equipment

GJB 570.13-1988 Meteorological instrument final test method cloud meter
GJB 2236-1994 Observation and aiming instrument accuracy test methods
GJB 570.8-1988 Typical test methods for meteorological instruments - air temperature measurement sensors
GJB 570.7-1988 Typical test methods for meteorological instruments - barometric pressure measurement sensors
GJB 8360-2015 Design margin and simulated misuse test of military electronic test instruments
GJB 6927-2009 Procedure and requirements for check and accept of military electronic measuring instruments
GJB 570.12-1988 Typical test methods for meteorological instruments—Surface wind measurement sensors
GJB 349.8-1987 Conventional weapons finalization test methods observation instruments and sights
GJB 570.3-1988 Data acquisition and processing for static testing of meteorological instrument finalization test methods
GJB 349.43-1990 Conventional weapons finalization test method Anti-tank missile system goniometer
GJB 1381A-2011 The measurement accuracy evaluation of photo-electric theodolite and pulse radar for missile and spacecraft test
GJB 6556.2-2008 Approval test methods of military meteoroogical equipment.Part 2:Measuring sensors and instruments for surface observation

Japanese Industrial Standards Committee (JISC), Cupping test test equipment

JIS B 1758:2013 Acceptance tests for gear measuring instruments
JIS B 7912-6:2007 Field procedures for testing geodetic and surveying instruments -- Part 6: Rotating lasers
JIS B 7615:2013 Electronic measuring instruments.Electromagnetic environment test method
JIS B 7912-5:2016 Field procedures for testing geodetic and surveying instruments -- Part 5: Total stations
JIS B 7728:2013 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7728:2002 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS B 7912-4:2016 Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM measurements to reflectors)
JIS K 7363:1999 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
JIS B 7611-2:2009 Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Measuring instruments used in transaction or certification
JIS B 7611-2:2015 Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Measuring instruments used in transaction or certification
JIS B 7912-8:2010 Field procedures for testing geodetic and surveying instruments -- Part 8: GNSS (RTK)
JIS K 7211-2:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
JIS C 5402-2-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests -- Test 2a : Contact resistance -- Millivolt level method
JIS K 7211-1:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
JIS K 7111-1:2006 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JIS K 7111-2:2006 Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test

机械工业部, Cupping test test equipment

JB/T 56214-1992 Guidelines for instrument reliability verification tests and measurement tests (exponential distribution)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cupping test test equipment

GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 6587.5-1986 Shock tests for electronic measuring instruments
GB/T 6587.6-1986 Transportation tests for electronic measuring instruments
GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
GB/T 11463-1989 Reliability test for electronic measuring instruments
GB 11463-1989 Electronic Measuring Instrument Reliability Testing
GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments
GB/T 6587.7-1986 Basic safety tests for electronic measuring instruments
GB/T 6833.9-1987 Electromagnetic compatibility test specification forelectronic measuring instruments--Conduced interference test
GB/T 6833.10-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Radiated interference test
GB/T 6833.2-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Magnetic field susceptibility test
GB/T 6833.5-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Radiated susceptibility test
GB/T 6833.6-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Conducted susceptibility test
GB/T 36416.2-2018 Testing machine vocabulary.Part 2:Non-destructive testing instruments
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 6833.3-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Electrostatic discharge susceptibility test
GB/T 6833.4-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Power line transient susceptibility test
GB/T 6833.8-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Operating magnetic field interference test
GB/T 13166-2018 Design margin and abuse tests for electronic measuring instrument
GB/T 6833.1-1986 Electromagnetic compatibility test specification for electronic measuring instruments--General
GB/T 13166-1991 Design margin and abuse tests for electronic measuringinstruments
GB/T 17860.2-1999 Electrical measuring instruments--X-t recorders. Part 2: Recommended additional test methods
GB/T 6833.7-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Non-operating magnetic field interference test
GB/T 22264.8-2009(英文版) Fixed digital electric measuring instruments—Part 8: Recommended test methods
GB/T 16990-1997 Textiles--Tests for colour fastness--Instrumental determination of 1/1 standard depth of colour
GB/T 1043.1-2008 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test

IN-BIS, Cupping test test equipment

IS 10175 Pt.1-1993 Mechanical testing kof kmetals. Modified erichsen cupping test. Sheet and strip. Part 1: Thickness up to 2 millmetres (First Revision)

Society of Automotive Engineers (SAE), Cupping test test equipment

SAE AIR1168/5A-2011 Aerothermodynamic Test Instrumentation and Measurement
SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation

Standard Association of Australia （SAA）, Cupping test test equipment

AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments
AS 2001.4.A05:2004 Method of test for textiles - Colourfastness tests - Instrumental assessment of the change in colour for determination of grey scale rating

Professional Standard - Water Conservancy, Cupping test test equipment

SL 530-2012 Specification for vertification and test of dam safety monitoring instruments
SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
SL 144-1995（条文说明） Calibration (inspection) method of water environment testing instruments and test equipment

水利部, Cupping test test equipment

SL/T 810-2021 Soil moisture monitoring instrument inspection and testing procedures
SL/T 756-2017 Calibration method of special instruments for geotechnical in-situ testing

Association Francaise de Normalisation, Cupping test test equipment

NF E05-059-1:2003 Geometrical products specification (GPS) - Acceptance tests and reverification tests of profile measuring instruments - Part 1 : measuring instruments for areal surface texture.
NF C41-105*NF EN 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1 : requirements for instruments
NF EN 61083-1:2001 Appareils et logiciels utilisés pour les mesures pendant les essais de choc à haute tension - Partie 1 : prescriptions pour les appareils
NF ISO 6487:2015 Véhicules routiers - Techniques de mesurage lors des essais de chocs - Instrumentation
NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF R10-212:2004 Road vehicles - Measurement techniques in impact tests - Instrumentation.
NF R10-212*NF ISO 6487:2015 Road vehicles - Measurement techniques in impact tests - Instrumentation
NF EN 60695-11-5:2017 Essais relatifs aux risques du feu - Partie 11-5 : flammes d'essai - Méthode d'essai au brûleur-aiguille - Appareillage, dispositif d'essai de vérification et lignes directrices
NF P94-074:1994 Soils : investigation and testing. Shear strength tests with revolving triaxial test apparatus. Apparatus. Preparation of test specimens. Unconsolidated and undrained (UU) test. Consolidated and undrained (Cu+U) test with measurement of the interstitial p
NF R10-212:1988 ROAD VEHICLES. MEASUREMENT TECHNIQUES IN IMPACT TESTS. INSTRUMENTATION.
NF R10-213:1989 Road vehicles. Measurement techniques in impact test. Optical instrumentation.
NF ISO 6487/A1:2018 Véhicules routiers - Techniques de mesurage lors des essais de chocs - Instrumentation - Amendement 1
NF C42-146*NF EN 61143-2:1994 Electrical measuring instruments. X-T recorders. Part 2 : recommended additional test methods.
NF R15-515:1995 Road vehicules. Apparatus for belt measurement and tensioning. Test method.
NF T66-009:1969 Petroleums and derivatives. Closed cup flash point of fluidized and cut-back asphalts using the abel closed tester.
NF A03-155-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.
NF C46-803:1994 Marine speed and distance measuring equipment (sdme). Operational and performance requirements. Methods of testing and required test results.
NF P94-051:1993 Soil : inverstigation and testing. Determination of Atterberg's limits. Liquid limit test using cassagrande apparatus. Plastic limit test on rolled thread.
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF C93-400-16-5*NF EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5 : mechanical tests on contacts and terminations - Test 16e : gauge retention force (resilient contacts)
NF R10-212/A1*NF ISO 6487/A1:2018 Road vehicles - Measurement techniques in impact tests - Instrumentation - Amendment 1
NF S12-113:1996 Optics and optical instruments. Visual acuity testing. Method of correlating optotypes.
NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
NF A03-155-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.
NF A09-320-2/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF A09-320-3/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3 : combined equipment.
NF G07-010-6*NF EN ISO 105-A06:1997 Textiles. Tests for colour fastness. Part A06 : instrumental determination of 1/1 standard depth of colour.
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF EN ISO 10140-5:2021 Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 5 : exigences relatives aux installations et appareillage d'essai

International Electrotechnical Commission (IEC), Cupping test test equipment

IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
IEC 60333:1993 Nuclear instrumentation; semiconductor charged-particle detectors; test procedures
IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments
IEC 61468:2000/AMD1:2003 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors; Amendment 1
IEC 61151:1992 Nuclear instrumentation; amplifiers and preamplifiers used with detectors of ionizing radiation; test procedures
IEC 61468:2000 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors
IEC TS 62370:2004 Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
IEC TS 62370:2004+AMD1:2017 CSV Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures

European Committee for Standardization (CEN), Cupping test test equipment

EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
EN ISO 14556:2015 Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method
EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
FprEN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/FDIS 4787:2021)
PD CEN/TS 1071-7:2003 Advanced technical ceramics Methods of test for ceramic coatings Part 7: Determination of hardness and Young磗 modulus by instrumented indentation testing
EN ISO 10140-5:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)
EN ISO 10140-5:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)

KR-KS, Cupping test test equipment

KS C IEC 61083-1-2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS R ISO 6487-2017 Road vehicles — Techniques of measurement inimpact tests — Instrumentation
KS P ISO 20776-2-2020 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
KS M ISO 179-1-2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS C IEC 61083-2-2019 Instruments and software used for measurement in high-voltage and highcurrent tests – Part 2: Requirements for software for tests with impulse voltages and currents

International Organization for Standardization (ISO), Cupping test test equipment

ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO 17123-7:2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 7: Optical plumbing instruments
ISO 17123-4:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM instruments)
ISO 6487:1980 Road vehicles — Techniques of measurement in impact tests — Instrumentation
ISO 6487:2000 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:2002 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:2012 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 6487:1987 Road vehicles; Measurement techniques in impact tests; Instrumentation
ISO 6487:2015 Road vehicles - Measurement techniques in impact tests - Instrumentation
ISO 17123-5:2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Electronic tacheometers
ISO 17123-2:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels
ISO 17123-3:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites
ISO 17123-5:2018 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations
ISO 17123-5:2012 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations
ISO 17123-4:2012 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors)
ISO 17123-6:2003 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
ISO 17123-6:2022 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers
ISO 17123-6:2012 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
ISO 8721:2010 Road vehicles - Measurement techniques in impact tests - Optical instrumentation
ISO 6487:2002/Amd 1:2008 Road vehicles - Measurement techniques in impact tests - Instrumentation; Amendment 1
ISO 8721:1987 Road vehicles; Measurement techniques in impact tests; Optical instrumentation
ISO 8721:2018 Road vehicles - Measurement techniques in impact tests - Optical instrumentation
ISO 16331-1:2012 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
ISO 16331-1:2017 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
ISO 12710:2002 Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments
ISO 9370:2009 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
ISO 9370:2017 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
ISO 6487:2015/Amd 1:2017 Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1
ISO 14997:2011 Optics and photonics - Test methods for surface imperfections of optical elements
ISO 14997:2003 Optics and optical instruments - Test methods for surface imperfections of optical elements
ISO/FDIS 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 18674-3:2017/Amd 1:2020 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 3: Measurement of displacements across a line: Inclinometers — Amendment 1
ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
ISO 179-1:2000 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 8597:1994 Optics and optical instruments - Visual acuity testing - Method of correlation optotypes
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 105-A06:1995 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 10140-5:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment

AENOR, Cupping test test equipment

UNE-EN 61083-1:2002 Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments.
UNE-EN ISO 179-2:2000 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 2: INSTRUMENTED IMPACT TEST (ISO 179-2:1997)

RO-ASRO, Cupping test test equipment

STAS SR CEI 1018-1995 High range beta and photon dose and dose rate portable instruments for emerpency radiation protection purposes
SR CEI 255-22-1-1989 Electrical relays Part 22: Electrical disturbance tests for measuring relays and protection equipment. Section 1: 1 MHz burst disturbance tests
STAS 11190/3-1980 Electronic measuring instruments STABILIZED POWER SUPPLIES FOR MEASURING General prescriptions lor measuring tests
STAS 10951-1977 ELECTRONIC MEASURING INSTRUMENTS General specifications concerning the expression of errors and conditions for measuring and testing

SE-SIS, Cupping test test equipment

SIS SS 11 03 40-1983 Hardness test - Vickers test HV 0,2 to HV100- Direct verification of testing machines
SIS SS-ISO 6487:1981 Road vehicles -Techniques of measure- ment in impact tests - Instrumentation

Electronic Components, Assemblies and Materials Association, Cupping test test equipment

ECA EIA-364-99-1999 TP-99 Gage Location and Retention Test Procedure for Electrical Connectors

CENELEC - European Committee for Electrotechnical Standardization, Cupping test test equipment

EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests Part 1: Requirements for digital recorders

Danish Standards Foundation, Cupping test test equipment

DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
DS 2362-1:1994 Measuring equipment-Inclination measuring instruments-Part 1:Inclination measuring instruments (levels)-Definitions,requirements,testing
DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
DS/EN ISO 105-A06:1998 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour
DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

IT-UNI, Cupping test test equipment

国家市场监督管理总局、中国国家标准化管理委员会, Cupping test test equipment

GB/T 37929-2019 Non-destructive testing instruments—Testing methods for life of X-ray tubes

Professional Standard - Petroleum, Cupping test test equipment

SY/T 5099-2007 Environmental test and reliability requirements for petroleum well-logging instruments
SY 5099-2007 Environmental Test and Reliability Requirements for Petroleum Logging Instruments

未注明发布机构, Cupping test test equipment

BS EN ISO 22232-1:2020 Tracked Changes. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
DIN EN ISO 179-1:2001 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact testing
BS 2782-3-Methods 352F:1996 Methods of testing plastics Part 3 . Mechanical properties Method 352F.Determination of impact resistance by the free - falling dart method (instrumented puncture test)

Lithuanian Standards Office , Cupping test test equipment

LST EN 13625-2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage

Hubei Provincial Standard of the People's Republic of China, Cupping test test equipment

DB42/T 397-2006 Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

The American Road & Transportation Builders Association, Cupping test test equipment

AASHTO TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
AASHTO T 153-2007 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus
AASHTO T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

Group Standards of the People's Republic of China, Cupping test test equipment

T/CHES 19-2018 General Protocol for Data Interaction of Model Test Water and Sediment Measuring Instruments

ES-UNE, Cupping test test equipment

UNE-EN ISO 3679:2023 Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022, Corrected versión 2023-05)
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)

BE-NBN, Cupping test test equipment

NBN-EN 61143-2-1994 Electrical measuring instruments - X-t recorders Part 2 : Recommended additional test methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cupping test test equipment

GB/T 34807-2017 General technical specifications for inspection and test of geotechnical engineering instruments & equipment
GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test

Institute of Electrical and Electronics Engineers (IEEE), Cupping test test equipment

IEEE N323C-2009 American National Standard Radiation Protection Instrumentation Test and Calibration Air Monitoring Instruments

ZA-SANS, Cupping test test equipment

SANS 14577-1:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method
SANS 14577-2:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines
SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks

NL-NEN, Cupping test test equipment

NEN 2874-1982 Testing of stony materials - Abrasion apparatus according to Amsler and determination of resistance to abrasion
NEN 2873-1982 Testing of stony materials - Skid-resistance apparatus according Leroux and determination of surf ace frictional properties

AASHTO - American Association of State Highway and Transportation Officials, Cupping test test equipment

TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
T 337-2009 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers

GOSTR, Cupping test test equipment

GOST IEC 60695-11-2-2017 Fire hazard testing. Part 11-2. Test flames. 1 kW nominal pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
GOST 28725-1990 Instruments for measuring the level of liquids and loose materials. General technical requirements and test methods

Professional Standard - Navy, Cupping test test equipment

HJB 324.9-2006 Introduced Russian submarine weapon test equipment measurement and verification regulations Part 9: 829.51.11 Direction instrument test bench
HJB 324.32-2006 Part 32 of the Metrology and Verification Regulations for Russian Submarine Weapons Test Equipment: БПЗO Tester

European Committee for Electrotechnical Standardization（CENELEC）, Cupping test test equipment

EN 50399:2011 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
EN 50399:2022 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
EN 61083-1:2001 Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments
EN 61143-2:1994 Electrical Measuring Instruments - X-t Recorders Part 2: Recommended Additional Test Methods (Incorporates Amendment A1: 1995)

Professional Standard - Electricity, Cupping test test equipment

DL/T 849.6-2004 General technical specification of test instruments used for power equipments Part 6: high voltage resonant test system
DL/T 849.6-2016 General Specifications for Special Test Instruments for Power Equipment Part 6: High Voltage Resonance Test Device

Professional Standard - Ocean, Cupping test test equipment

HY/T 0299-2020 The method of dynamic environmental model test for oceanographic observation instruments in laboratory—General

Indonesia Standards, Cupping test test equipment

SNI ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
SNI 7881-2013

Professional Standard - Energy, Cupping test test equipment

DL/T 2437.1-2021 General specifications for sulfur hexafluoride testers Part 1: Sulfur hexafluoride density relay calibrator

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Cupping test test equipment

ASHRAE OR-05-8-6-2005 Feasibility Study of Using Various Instruments for Measurement of Air Motion in a Test Room

GB-REG, Cupping test test equipment

REG NASA-LLIS-0968-2001 Lessons Learned ?Avoid Test Program Reductions on Lower Cost/Higher Risk Instrument Projects

European Association of Aerospace Industries, Cupping test test equipment

AECMA PREN 3475-414-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) Edition P 1

TR-TSE, Cupping test test equipment

TS 2064-1975 METHODS OF SAMPLING AND EVALUATION OF INSPECTION AND TEST RESULTS OF LABORATORY GLASS WARE AND MEDICAL GLASS INSTRUMENTS