ZH
RU
ES

Chamber non-contact seal

Chamber non-contact seal, Total:90 items.

In the international standard classification, Chamber non-contact seal involves: Equipment for the chemical industry, Seals, glands, Fasteners, Aerospace electric equipment and systems, Transport, Applications of information technology, Lamps and related equipment, Pipeline components and pipelines, Components and accessories for telecommunications equipment, Headgear. Clothing accessories. Fastening of clothing, Aerospace fluid systems and components, Electromechanical components for electronic and telecommunications equipment.

RO-ASRO, Chamber non-contact seal

STAS 7297-1971 Rolling bearings CONTACTLESS SEALING DEVICES Dimensions
STAS 12865-1990 Repairable contactors (Nothermetically sealed) for aircraft General technical requirements for quality

Professional Standard - Chemical Industry, Chamber non-contact seal

HG/T 4169-2011 Non-contact metal honeycomb seal

General Motors Corporation (GM), Chamber non-contact seal

GM 9980621-1993 Adhesive, Contact, Reclaimed Rubber, Weatherstrip Revision A

Professional Standard - Machinery, Chamber non-contact seal

JB/T 6381.2-2007 Welding cone couplings straight male stud couplings with G-type pipe threads
JB/T 6382.2-2007 Welding cone couplings 90 degree syphon male stud couplings with G-type pipe threads

Korean Agency for Technology and Standards (KATS), Chamber non-contact seal

KS W ISO 4084-2004(2009) Aircraft－Repairable contactors(not hermetically sealed)－Performance requirements
KS W ISO 4084:2004 Aircraft-Repairable contactors(not hermetically sealed)-Performance requirements
KS W ISO 4084:2014 Aircraft－Repairable contactors(not hermetically sealed)－Performance requirements
KS X 6923-3-2004 Contactless pre-paid/post pay IC card — Purchase SAM — Part 3: Cryptogram
KS X 6923-3-2014(2019) Contactless pre-paid/post pay IC card — Purchase SAM — Part 3: Cryptogram
KS X 6924-3-2014 Contactless pre-paid/post pay IC card — User card — Part 3: Cryptogram
KS X 6924-3-2009 Contactless pre-paid/post pay IC card-User card-Part 3:Cryptogram
KS X 6924-3-2014(2019) Contactless pre-paid/post pay IC card — User card — Part 3: Cryptogram
KS X ISO/IEC 10536-1-2002(2022) Identification cards－Contactless integrated circuit(s) cards－Close-coupled cards－Part 1：Physical characteristics

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Chamber non-contact seal

GB/T 31440-2015 Contactless IC card receiver and distributor for closed toll

Society of Automotive Engineers (SAE), Chamber non-contact seal

SAE AS38999/45A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Solder Mounting, Hermetic, Breech Coupling, Herm...
SAE AS38999/48A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Weld Mounting Hermetic, Breech Coupling, Hermeti...
SAE AS38999/41A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling,...
SAE AS38999/43A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, He...
SAE AS85028/2A-2010 CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER HARDWARE, RECEPTACLE, CRIMP REMOVABLE SOCKET CONTACTS, CLASS E
SAE AS38999/46A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environmental Resistant, Removable Crimp and Hermetic Solder Contacts, Plug, Breech Coupling, Emi Grounding, Removable Crimp Cont...
SAE AS33514C-2008 Fitting End, Standard Dimensions for Flareless Tube Connection and Gasket Seal
SAE AS38999/42A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Breech Coupling, Removable ...
SAE AS38999/47A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Plug, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric

U.S. Military Regulations and Norms, Chamber non-contact seal

ARMY MS18003 REV A VALID NOTICE 3-2000 LAMP INCANDESCENT-SEALED BEAM, PAR 36 HEADLAMP, 3 CONTACT LUG TYPE
ARMY MS18003 REV A VALID NOTICE 1-1991 LAMP INCANDESCENT-SEALED BEAM, PAR 36 HEADLAMP, 3 CONTACT LUG TYPE
ARMY MS18003 REV A-1968 LAMP INCANDESCENT-SEALED BEAM, PAR 36 HEADLAMP, 3 CONTACT LUG TYPE
ARMY MIL-PRF-55629/4 F-2005 CIRCUIT BREAKERS, MAGNETIC, UNSEALED TRIP-FREE, DOUBLE POLE, AUXILARY CONTACTS (0.2 TO 50 AMPERES)

SAE - SAE International, Chamber non-contact seal

SAE AS38999/45A-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptacle@ Solder Mounting@ Hermetic@ Breech Coupling@ Hermetic Sol
SAE AS38999/45-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptacle@ Solder Mounting@ Hermetic@ Breech Coupling@ Hermetic Sol
SAE AS85028/2-2004 CONNECTOR@ ELECTRIC@ RECTANGULAR@ INDIVIDUAL CONTACT SEALING@ POLARIZED CENTER HARDWARE@ RECEPTACLE@ CRIMP REMOVABLE SOCKET CONTACTS@ CLASS E
SAE AS85028/2B-2016 CONNECTOR@ ELECTRIC@ RECTANGULAR@ INDIVIDUAL CONTACT SEALING@ POLARIZED CENTER HARDWARE@ RECEPTACLE@ CRIMP REMOVABLE SOCKET CONTACTS@ CLASS E
SAE AS38999/49-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptable@ in Line Cable@ Breech Coupling@ Removable Crimp Contacts
SAE AS38999/49A-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptable@ in Line Cable@ Breech Coupling@ Removable Crimp Contacts

Association Francaise de Normalisation, Chamber non-contact seal

NF D36-106-2*NF EN 751-2:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Part 2 : non-hardening jointing compounds.
NF EN 751-2:1997 Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ère, 2ème et 3ème famille et de l'eau chaude - Partie 2 : composition d'étanchéité non durcissante.
NF EN 3545-004:2006 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation -55 oC à 175 oC - Partie 004 : connecteurs à contacts mâles - Norme d...
NF EN 3545-003:2006 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 oC à 175 oC - Partie 003 : Connecteurs à contacts femelles - Norm...
NF R13-480:1999 Road vehicles. Connection interface for unsealed on-board connectors. Category 1,5 mm and/or 2,8 mm one stack contact connectors.
NF D36-106-3*NF EN 751-3:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Part 3 : unsintered PTFE tapes.
NF L54-175-002*NF EN 3545-002:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 002 : Specification of performance and contact arrangements

Professional Standard - Electron, Chamber non-contact seal

SJ 51212/2-1994 Connector,receptacle,electrical,triaxial,radio frequency(series TRB(uncabled),socket contact,jamunt mounted,hermetic and nonhermetic,class 2),detail specification for
SJ 50599/1-2003 Detail specification for fixed connector electric, jam nut mounting, solder type, hermetic seal, bayonet coupling, series Ⅱ, classes Y for JY27477
SJ 50599/4-2006 Detail specification for sheet connectors, electrical, circular, threaded, receptacle, box mounting flange, hermetic, hermetic solder contacts, series Ⅲ, J599/21 (classes N and Y)
SJ 50599/5-2006 Detail specification for sheet connectors, lectrical, circular, threaded, receptacle, JAM-NUT mounting, hermetic, hermetic solder contacts series Ⅲ, J599/23 (classes N and Y)
SJ 50599/6-2006 Detail specification for sheet connectors electrical, circular, threaded, receptacle, solder mounting, hermetic, hermetic solder contacts series Ⅲ, J599/25 (classes N and Y)
SJ 50599/7-2006 Detail specification for sheet connectors, electrical, circular, threaded, receptacle, weld mounting, hermetic, hermetic solder contacts series Ⅲ, J599/27 (classes N and Y)

British Standards Institution (BSI), Chamber non-contact seal

BS EN 3545-002:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 002: Specification of performance and contact arrangements
BS ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
BS 9210 N007-1:1976 Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 $2I, snap-on couplings - Full assessment level
BS EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Connectors with male contacts - Product standard
BS EN 3545-004:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ - Part 004: Connectors with male contacts - Product standard
BS ISO 13259:2010 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
BS EN 3545-002:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 002: Specification of performance and contact arrangements

European Committee for Standardization (CEN), Chamber non-contact seal

EN 751-2:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
EN 12240:1997 Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure
EN 3545-004:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard
EN 3545-002:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C - Part 002: Specification of performance and contact arrangements
EN 3545-003:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 degree C to 175 degrees C - Part 003: Connectors with female contacts Product standard

German Institute for Standardization, Chamber non-contact seal

DIN EN 751-3:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes; German version EN 751-3:1996
DIN EN 751-2:1997-08 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds; German version EN 751-2:1996
DIN EN 3545-002:2009 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 002: Specification of performance and contact arrangements; German and English version
DIN EN 3545-004:2006-09 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard; German and English version...
DIN EN 3545-003:2006-09 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard; German and English versi...
DIN EN ISO 16637:2020 Radiological protection - Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources (ISO 16637:2016)

International Organization for Standardization (ISO), Chamber non-contact seal

ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints

(U.S.) Ford Automotive Standards, Chamber non-contact seal

FORD ESR-M11P17-A-2007 ADHESIVE, CONTACT - GASKET AND SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***

PL-PKN, Chamber non-contact seal

PN-EN ISO 13259-2021-01 E Thermoplastics piping systems for underground non-pressure applications--Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

Military Standard of the People's Republic of China-General Armament Department, Chamber non-contact seal

GJB 598/19-2011 Detail specification for series 2 JY3477 bayonet coupling crimp contact box flange mounting hermetic solderless receptacle (class N)

Defense Logistics Agency, Chamber non-contact seal

DLA MIL-DTL-38999 L SUPP 1-2008 CONNECTORS, ELECTRICAL CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
DLA MIL-PRF-55339/4 B-2004 ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, IN-LINE, JAMNUT MOUNTED, (WITHIN SERIES N JACK TO SERIES N JACK, (HERMETIC AND NON-HERMETIC)), CLASS 2
DLA MIL-DTL-38999 L-2008 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
DLA MIL-DTL-38999 L (1)-2009 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
DLA QPL-38999-QPD-2011 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
DLA MIL-DTL-38999 L SUPP 1A-2012 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
DLA MIL-DTL-38999 L (2)-2012 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
DLA QPL-38999-2012 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, General Specification for

CEN - European Committee for Standardization, Chamber non-contact seal

EN 3545-002:2005 Aerospace series - Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures -55 degrees C to 175 degrees C - Part 002: Specification of performance and contact arrangements

Danish Standards Foundation, Chamber non-contact seal

DS/EN 751-2:1998 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
DS/EN 3545-003:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard
DS/EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard
DS/EN 3545-002:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements

Lithuanian Standards Office , Chamber non-contact seal

LST EN 751-2-1999 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
LST EN 3545-004-2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard
LST EN 3545-003-2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard
LST EN 3545-002-2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements

AENOR, Chamber non-contact seal

UNE-EN 751-2:1997 SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2: NON-HARDENING JOINTING COMPOUNDS.

ES-UNE, Chamber non-contact seal

UNE-EN 3545-003:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 003: Connectors with female contacts - Product standard (Endorsed by AENOR in Ma...
UNE-EN 3545-004:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard (Endorsed by AENOR in Marc...