ZH
RU
ES

Original state tester

Original state tester, Total:496 items.

In the international standard classification, Original state tester involves: Textile machinery, Pharmaceutics, Metrology and measurement in general, Applications of information technology, Analytical chemistry, Soil quality. Pedology, Metalliferous minerals, Testing of metals, Equipment for petroleum and natural gas industries, Animal feeding stuffs, Paper and board, Heat recovery. Thermal insulation, Crude petroleum, Radiation protection, Radiation measurements, Nuclear energy engineering, Farming and forestry, Fertilizers, Plastics, Reinforced plastics, On-board equipment and instruments, Petroleum products in general, Fuels, Electricity. Magnetism. Electrical and magnetic measurements, General methods of tests and analysis for food products, Construction industry, Wastes, Geology. Meteorology. Hydrology, Construction materials, Acoustics and acoustic measurements, Linear and angular measurements, Power stations in general, Products of the chemical industry, Protection of and in buildings, Fibre optic communications, Medical equipment, Road engineering, Milk and milk products, Mechanical testing, Textile fibres, Water quality, Refractories, Non-ferrous metals, Paints and varnishes, Vocabularies, Waxes, bituminous materials and other petroleum products, Optoelectronics. Laser equipment, Equipment for the paper industry, Optics and optical measurements, Petroleum, petroleum products and natural gas handling equipment, Shipbuilding and marine structures in general, Coals, Rails and railway components, Environmental testing, Measurement of volume, mass, density, viscosity, Aids for disabled or handicapped persons, Photography, Fishing and fish breeding, Air quality, Electronic tubes, Astronomy. Geodesy. Geography, Earthworks. Excavations. Foundation construction. Underground works, Measurement of time, velocity, acceleration, angular velocity, Power transmission and distribution networks, Tea. Coffee. Cocoa, Wood, sawlogs and sawn timber, Elements of buildings, Wind turbine systems and other alternative sources of energy, Non-destructive testing, Optical equipment, Tyres, Hospital equipment, Natural gas, Tobacco, tobacco products and related equipment, Rubber, Products of the textile industry, Pulps, Paint ingredients.

Professional Standard - Textile, Original state tester

FZ/T 98011-2011 Moisture regain tester for raw cotton
FZ/T 01069-1999 Measuring method of yarn diameter CCD measuring instrument method

National Metrological Verification Regulations of the People's Republic of China, Original state tester

JJG 845-2009 Verification Regulation of Raw Cotton Moisture Tester
JJG 845-1993 Verification Regulation of Raw Cotton Moisture Tester
JJG 671-1990 Verification Regulation of Instrument for Dynamical Measurement of Lead Screw
JJG 930-1998 Verification Regulation of Pile Dynamic Measuring Instrument
JJG(机械) 109-1992 Verification Regulations for Dynamic Speed Measuring Instrument
JJG 679-1990 Verification Regulation of cold Atomic Absorption Analyzer of Mercury
JJG 548-1988 Verification Regulation of cold Atomic Fluorometer For Determination of Mercury
JJG 995-2005 Static Torque Measuring Devices
JJG 930-2021 Pile Dynamic Measuring Instruments
JJG(交通) 005-2005 Automotive Axles Weight Dynamic Tester
JJG 170-2020 Waterborne engineering attitude measuring instrument【
JJG(铁道) 198-2008 Dynamic Deformation Modulus EVD Tester
JJG 834-1993 Verification Regulation of Dynamic Signal Analyzer
JJG 834-2006 Verification Regulation of Dynamical Signal Analyzer
JJG(轻工) 91-1992 Carpet dynamic load meter verification regulations
JJG(电子) 04039-1991 GH3112 Integrated Circuit Dynamic Logic Function Detector Verification Regulations
JJG(轻工) 92-1992 Verification regulations for carpet static load tester
JJG 1104-2015 Dynamic Light Scattering Particle Size Analyzers
JJG(电子) 05013-1988 AV2551 type potentiometer dynamic contact resistance change measuring instrument trial verification regulations
JJG(电子) 04010-1987 BJ2961 Transistor Integrated Circuit Dynamic Parameter Tester Trial Verification Regulations
JJG(电子) 04016-1988 BJ2984 (QR-3) Trial Verification Regulations for Transient Thermal Resistance Tester of Crystal Transistor
JJG 787-1992 Verification Regulation of Dynamomenter for Measuring Instrument
JJG 787-2005 Verification Regulations for Measuring Instruments and Dynamometers
JJG 291-2018 Dissolved Oxygen Meters
JJG 844-1993 Regain Tester
JJG 166-2020 Sand concentration meter
JJG 701-2008 Verification Regulation of Melting-point Measurement Instruments
JJG(纺织) 039-1990 Verification Regulations for Whiteness Meter
JJG 55-1984 Verification Regulation of Horizontal Metroscope
JJG 97-2001 Verification Regulation of Goniometers
JJG 1006-2005 Determinators for Total Sulfur in Coal
JJG 825-1993 Verification Regulation of Radon Meter
JJG(交通) 061-2005 Verification Regulation of Wheel Alignment Tester
JJG 825-2013 Radon Measuring Instruments
JJG(核工) 024-1998 Verification Regulations for Radon Meter
JJG(核工) 24-1991 Verification Regulations for Radon Meter
JJG(轻工) 99-1993 Verification Regulations for Moisture Meter
JJG(地质) 1022-1994 Verification Regulations for Liquid-plastic Limit Tester
JJG 1052-2009 Verification Regulation of Loop Resistance Tester and DC Resistance Meters
JJG(建材) 110-1994 Expasion meter of Le-chatelier apparatus
JJG 658-2022 Thermogravimetric Moisture Meters
JJG(建材) 136-1999 Glass softening point tester
JJG(核工) 23-1991 Verification Regulations for γ Logging Tool
JJG 365-2008 Verification Regulation of Electrochemical Oxygen Meter
JJG(烟草) 24-2010 Verification Regulation of Cut Tobacco Elasticity Tester
JJG(烟草)24-2010 Verification Regulation of Cut Tobacco Elasticity Tester
JJG(纺织) 067-1995 Verification Regulations for Capillary Effect Meter
JJG 24-2010 Verification Regulations for Tobacco Elasticity Tester

RO-ASRO, Original state tester

STAS 35-1981 CRUDE, OIL LIQUID SEMI-SOLID AND SOLID PETROLEUM PRODUCTS Detcrmination or density
STAS 11078-1978 APPATARUS FOR CYANIDES DETERMINATION
STAS 11071/6-1986 Block diagrams of hierarchy BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR FORCE IN STATIC REGIME
STAS 1166-1989 Crude oil CHLORIDES CONTENT DETERMINATION
STAS 10518-1976 Glass DETERMINATION OF SOFTENING LITTLETON POINT
STAS 3793-1967
STAS 3228-1983 Solid fueles COAl.S Grain size dctermination
STAS 11071/8-1986 Block diagrams of hierarchy BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR TORQUE IN STATIC REGIME
STAS 6182/18-1981 WINE Determination of reducing sugar
STAS 6283/4-1984 CEREALS Determination of raw protein content

National Metrological Technical Specifications of the People's Republic of China, Original state tester

JJF(纺织) 05A-1985 Verification method of Y412A raw cotton moisture meter
JJF(纺织) 05-1985 Verification method of Y412 raw cotton moisture meter
JJF 1330-2011 Calibration Specification for Instantaneous Effective Intensity Testers
JJF(纺织) 102-2021 Calibration Specification for Geotextiles Products-Dynamic Perforation Testers
JJF(纺织)102-2021 Calibration Specification for Geotextiles Products-Dynamic Perforation Testers
JJF 1381-2012 Program of Pattern Evaluation of Raw Cotton Moisture Testers
JJF(纺织) 005-2006 Calibration specification for Y412A raw cotton moisture meter
JJF 1732-2018 Calibration Specification for d33 Measurement Instruments by Quasi-static Method 
JJF 1410-2013 Calibration Specification for Dynamical Screw Travel Testers

工业和信息化部/国家能源局, Original state tester

JB/T 20185-2017 Pyrogen detector
JB/T 20184-2017 Bacterial endotoxin analyzer

RU-GOST R, Original state tester

GOST 8.256-1977 State system for ensuring the uniformity of measurements. Standardization and determination of dynamic characteristics of analogue measuring instruments. Basic principles
GOST R 54284-2010 Crude oil. Determination of water by coulometric Karl Fischer titation
GOST 29074-1991 Equipment for monitoring of radiation situation. General requirements
GOST 30435-1996 Paper and board. Determination of bending stiffness by static methods. General principles
GOST R 56801-2015 Plastics. Determination of dynamic mechanical properties. Part 1. General principles
GOST R ISO 3675-2007 Crude petroleum and liquid petroleum products. Laboratory hydrometer method for determination of density
GOST R 55613-2013 Nondestructiv testing. Reference mesures for calibration of thicrness gauges of inorganic coverings. General
GOST 30630.1.1-1999 Mechanical environment stability test methods for machines, instruments and other industrial products. Determination of dynamic characteristics of structure
GOST R 8.656-2009 State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. Methods of verification
GOST R 51805-2001 Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of acceleration steady state
GOST 26344.0-1984 Nuclear instrumentation for nuclear power stations. Basic principles
GOST EN 15475-2013 Fertilizers. Determination of ammoniacal nitrogen
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST R 57950-2017 Plastics. Determination of dynamic mechanical properties. Part 10. Complex shear viscosity using a parallel-plate oscillatory rheomete
GOST EN 15562-2013 Fertilizers. Determination of cyanamide nitrogen
GOST R 50604-1993 Wheelchairs. Method of determination for static stability
GOST 8.661-2018 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring surface flatness parameters of optical surfaces up to 200 mm
GOST 8.513-1984 State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 28657-1990 Iron ores. Determination of reducibility

American National Standards Institute （ANSI), Original state tester

ANSI X9.80-2005 Prime Number Generation, Primality Testing, and Primality Certificates
ANSI/ASTM D4308:2021 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ANSI/TAPPI T1215 sp-2012 The determination of instrumental color differences
ANSI/T 1215 SP-2021 The determination of instrumental color differences

German Institute for Standardization, Original state tester

DIN 66137-1:2019-03 Determination of solid state density - Part 1: Principles
DIN EN ISO 6721-1:2019-09 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2019); German version EN ISO 6721-1:2019
DIN EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:2004
DIN EN ISO 7278-2:1997 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988); German version EN ISO 7278-2:1995
DIN 19265:2007 pH-/redox-measurement - pH-/redox measuring apparatus - Technical requirements
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN EN ISO 6721-1:2019 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2019)
DIN EN ISO 7278-1:1996-12 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987); German version EN ISO 7278-1:1995
DIN EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000
DIN 53018-1:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Principles
DIN EN ISO 7278-1:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987); German version EN ISO 7278-1:1995
DIN EN 15559:2009-06 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd; German version EN 15559:2009
DIN EN 15476:2009-04 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda; German version EN 15476:2009
DIN EN 15475:2009 Fertilizers - Determination of ammoniacal nitrogen; English version of DIN EN 15475:2009-04
DIN EN 14770:2022-03 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR); German and English version prEN 14770:2022 / Note: Date of issue 2022-02-18*Intended as replacement for DIN EN 14770 (2012-08).
DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN EN 14770:2022 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR); German and English version prEN 14770:2022
DIN EN 14770:2012-08 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle using a Dynamic Shear Rheometer (DSR); German version EN 14770:2012 / Note: To be replaced by DIN EN 14770 (2022-03).
DIN IEC 61577-1:2007 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General principles (IEC 61577-1:2006)
DIN CEN/TS 15562:2007 Fertilizers - Determination of cyanamide nitrogen; German version CEN/TS 15562:2007
DIN EN 14770:2006 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR); English version of DIN EN 14770:2006
DIN EN 17643:2022-09 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test; German version EN 17643:2022
DIN EN 15558:2009-06 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch; German version EN 15558:2009

Professional Standard - Military and Civilian Products, Original state tester

WJ 2506-1998 Verification Regulations for Photodiode Dynamic Tester
WJ 2539-1999 Verification Regulations for Temperature Measuring Diode Meter

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Original state tester

GB/T 32266-2015 Method of performance testing for atomic fluorescence spectrometer
GB/T 23144-2008 Paper and board.Determination of bending stiffness by static methods.General principle
GB/T 23442-2009 Determination of structure and morphology for the precursors of polyacrylonitrile-based carbon fibers
GB/T 23739-2009 Soil quality.Analysis of available lead and cadmium contents in soils.Atomic absorption spectrometry
GB/T 17286.1-1998 Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 1: General principles
GB/T 17286.1-2016 Liquid hydrocarbons dynamic measurement proving systems for volumetric meters.Part 1:General principles
GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
GB/T 26930.11-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 11:Determination of dynamic viscosity
GB/T 13163.1-2009 Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part 1:General principles
GB/T 9109.3-1988 Dynamic measurement of crude oil--The technical stipulations of installation for fixed pipe provers
GB/T 26930.10-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 10:Determination of sulful content by an instrumental method
GB/T 9109.2-1988 Dynamic measurement of crude oil--The technical requirement of displacement meter installation
GB/T 25884-2010 Measurement of characters for batrachia
GB/T 26984-2011 Test method for distillation characteristics of crude oil
GB/T 26985-2011 Standard test method for pour point of crude oils
GB/T 18798.3-2002 Instant tea in solid from--Determination of moisture content
GB 4469-1984 Test method for the reduction speed of vat dyes－Steam process
GB/T 4469-1984 Test method for the reduction speed of vat dyes--Steam process
GB/T 4469-2006 Vat dyes.Determination of the reduction speed.Steam process

其他未分类, Original state tester

BJS 201702

未注明发布机构, Original state tester

BS ISO 13930:2015(2018) Iron ores for blast furnace feedstocks — Determination of low - temperature reduction - disintegration indices by dynamic method
SAE AS396B-2001 Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)

Group Standards of the People's Republic of China, Original state tester

T/ZNZ 082-2021 Determination of available mercury in soil by atomic fluorescence spectrometry
T/SDFA 002.4-2023
T/SXSYSJSXH 0001-2019 Universal Atomic fluorescence mercury analyzer
T/CCPEF 004-2016 National evaluation rules for raw ecological products under forest
T/NAIA 0217-2023 Determination of Mercury Content in Waste Activated Carbon Solid Sample Injection-Cold Atomic Absorption Mercury Meter Method
T/CASME 321-2023 Sound velocity meter
T/CSEE 0176-2021 Determination of gaseous mercury in flue gas of coal-fired power plants -cold atomic absorption spectrophotometry
T/JLFX 008-2022 Regulations for Monitoring and Control of Pests in Plain Ecological Forest
T/GDC 253-2023 Technical specification for portable Fetal and Maternal ECG Holter Monitor
T/ZZB 2050-2021 Spirometer
T/GDC 252-2023 Performance and Safety Requirements of Fetal and Maternal ECG Holter Monitor
T/CIMA 0041-2021 Ammonia Nitrogen Rapid Tester
T/ACEF 080-2023 Fixed wing general aviation platforms Technical guidance for airborne in-situ measurement of atmospheric gaseous pollutants
T/CIMA 0058-2022
T/CMA JD009-2020 Dynamic test items and methods for portable braking performance testers
T/SBX 025-2019 Fixed Gas Detector

Henan Provincial Standard of the People's Republic of China, Original state tester

DB41/T 813-2013 Determination of Available Antimony in Soil by Atomic Fluorescence Method
DB41/T 812-2013 Determination of Carbonate Antimony in Soil by Atomic Fluorescence Method

Korean Agency for Technology and Standards (KATS), Original state tester

KS E ISO 13930-2017(2022) Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
KS M ISO 5628:2017 Paper and board－Determination of bending stiffness－General principles for two-point, three-point and four-point methods
KS L ISO 8301-2006(2021) Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
KS M ISO 5628:2012 Paper and board-Determination of bending stiffness-General principles for two-point, three-point and four-point methods
KS M ISO 6721-1:2012 Plastics－Determination of dynamic mechanical properties－Part 1：General principles
KS E ISO 4696-2:2022 Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
KS E ISO 4696-1-2017(2022) Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by static method－Part 1：Reduction with CO, CO2, H2 and N2
KS B OIMLR 85-2006 Automatic level gauges for measuring the level of liquid in fixed storage tanks
KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
KS M ISO 7278-2:2003 Liquid hydrocarbons－Dynamic measurement－Proving systems for volumetric meters－Part 2：Pipe provers
KS M ISO 6721-10-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer
KS M ISO 7278-1:2003 Liquid hydrocarbons－Dynamic measurement－Proving systems for volumetric meters－Part 1：General principles
KS A ISO 21550-2005(2020) Photography－Electronic scanners for photographic images－Dynamic range measurements
KS A 4054-2005 Radiographic image quality indicators for non-destructive testing-Principles and identification
KS I 2218-2009 Detector tube type gas measuring instruments
KS M 2002-2011 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
KS M 2002-1986 Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method
KS M ISO 4176-2006(2011) Fertilizers－Determination of nitrate nitrogen content－Nitron gravimetric method
KS M ISO 7263-1:2020 Corrugating medium — Determination of the flat crush resistance g medium — Determination of the flat crush resistance
KS M 7096-2018 Paper — Determination of stiffness by Clark stiffness tester

KR-KS, Original state tester

KS E ISO 13930-2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
KS M ISO 5628-2017 Paper and board－Determination of bending stiffness－General principles for two-point, three-point and four-point methods
KS E ISO 4696-2-2022 Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
KS E ISO 4696-1-2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by static method－Part 1：Reduction with CO, CO2, H2 and N2
KS M ISO 6721-10-2016 Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer
KS M ISO 7263-1-2020 Corrugating medium — Determination of the flat crush resistance g medium — Determination of the flat crush resistance
KS M ISO 15361-2017 Pulps－Determination of zero-span tensile strength, wet or dry

ES-UNE, Original state tester

UNE-EN ISO 7278-1:1995 LIQUID HYDROCARBONS. DYNAMIC MEASUREMENT. PROVING SYSTEMS FOR VOLUMETRIC METERS. PART 1: GENERAL PRINCIPLES. (ISO 7278-1:1987) (Endorsed by AENOR in February of 1996.)
UNE-EN ISO 6721-1:2020 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2019)
UNE-EN 17643:2023 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a dynamic shear rheometer (DSR) - BTSV test

Professional Standard - Aviation, Original state tester

HB 6136.8-1987 Flight Test Instrument (Static) Calibration Specification Attitude Angle
HB 6136.5-1987 Flight Test Instrument (Static) Calibration Specification Force
HB 6136.4-1987 Flight Test Instrument (Static) Calibration Specification Stress
HB 6136.3-1987 Flight Test Instrument (Static) Calibration Specification Speed
HB 6136.2-1987 Flight Test Instrument (Static) Calibration Specification Altitude
HB 6136.11-1987 Flight Test Instrument (Static) Calibration Specification Temperature
HB 6136.12-1987 Flight Test Instrument (Static) Calibration Specification Speed
HB 6136.13-1987 Flight Test Instrument (Static) Calibration Specification Flow
HB 6136.10-1987 Flight Test Instrument (Static) Calibration Specification Displacement
HB 6136.1-1987 General Rules for Calibration of Flight Test Instruments (Static)
HB 6136.7-1987 Flight Test Instrument (Static) Calibration Specification Angular Velocity
HB 6136.6-1987 Flight Test Instrument (Static) Calibration Specification Linear Acceleration
HB 6136.9-1987 Flight Test Instrument (Static) Calibration Specification Angle of Attack Side Slip Angle

卫生健康委员会, Original state tester

WS/T 635-2018 Determination of Arsenic Speciation in Urinary Liquid Chromatography-Atomic Fluorescence Method

Professional Standard - Non-ferrous Metal, Original state tester

YS/T 685-2009 Analyser of hydrogen in liquid aluminium and aluminium alloys

IN-BIS, Original state tester

IS 5673-1970

Lithuanian Standards Office , Original state tester

LST EN ISO 7278-1:2000 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987)
LST EN 241-2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
LST EN ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
LST EN 15559-2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd
LST EN 14770-2012 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)

中国石油天然气总公司, Original state tester

SY/T 5798-1993 Evaluation method for wax inhibitors in crude oil Wax deposition tester method

Professional Standard - Agriculture, Original state tester

NY/T 2770-2015 Determination of organic forms of chromium in organic chromium additives (original powder)
JJG(教委) 023-1996 Verification Regulations for Atomic Absorption Spectrometer
NY/T 1233-2006 Technical Rules For Monitoring of Rangeland Resources and Ecology
NY/T 1116-2014 Fertilizers.Determination of nitrate nitrogen, ammonium nitrogen, amide nitrogen contents
ZB X 66038-1987 Amino nitrogen determination method
JJG(教委) 015-1996 Verification Regulations for Inductively Coupled Plasma Atomic Emission Spectrometer
SB/T 10249-1995 Wheat Flour Gluten Tester
NY/T 1751-2009 Determination of reducing sugar in sugar beet root

International Organization for Standardization (ISO), Original state tester

ISO 5628:1990 Paper and board; determination of bending stiffness by static methods; general principles
ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles
ISO 6721-1:2001 Plastics - Determination of dynamic mechanical properties - Part 1: General principles
ISO 2714:2017 Liquid hydrocarbons - Volumetric measurement by displacement meter
ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
ISO 6721-10:1999 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 6721-10:2015 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 13029:2012 Textiles - Determination of drying rate in dynamic state by the modified sweating-guarded hotplate
ISO/CD 157:1976 Coal — Determination of forms of sulfur
ISO 3675:1998/AWI Amd 1 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method — Amendment 1
ISO 25475:2016 Fertilizers - Determination of ammoniacal nitrogen
ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
ISO/CD 6721-10:2023 Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate and a cone-and-plate oscillatory rheometer
ISO 527-1:1993/Amd 1:2005 Plastics - Determination of tensile properties - Part 1: General principles; Amendment 1: Details of extensometer
ISO 7205:1986 Radionuclide gauges; Gauges designed for permanent installation
ISO 11929-6:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 6: Fundamentals and applications to measurements by use of transient mode

British Standards Institution (BSI), Original state tester

BS ISO 7278-1:1996 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters - General principles
BS DD CEN/TS 15476:2006 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda
BS EN ISO 6721-1:2019 Tracked Changes. Plastics. Determination of dynamic mechanical properties. General principles
BS ISO 6721-10:2001 Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer
BS 7424:1991 Guide to general principles for determination of the bending stiffness of paper and board by static methods
BS EN 62343-3-2:2016 Dynamic modules. Performance specification templates. Optical channel monitor
BS EN ISO 7278-1:1990 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - General principles
BS EN ISO 7278-2:1990 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pipe provers
BS EN 15559:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd
BS EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS EN 13302:2018*BS 2000-505:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS DD CEN/TS 15475:2006 Fertilizers - Determination of ammoniacal nitrogen
BS EN 241:2000 Methods of test for petroleum and its products - Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
BS ISO 6721-10:2015 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO 17123-8:2015 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. GNSS field measurement systems in real-time kinematic (RTK)
BS ISO 7176-1:1999 Wheelchairs - Determination of static stability
BS ISO 7176-1:2014 Wheelchairs. Determination of static stability
DD CEN/TS 15559:2007 Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd
BS ISO 21550:2004 Photography - Electronic scanners for photographic images - Dynamic range measurements
BS EN 15475:2009 Fertilizers — Determination of ammoniacal nitrogen
BS ISO 7278-4:1999 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers
BS EN 14770:2023 Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS ISO 4696-2:2007 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method. Reduction with CO and N2
BS ISO 4696-2:2015 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method. Reduction with CO and N2
BS EN 14770:2012 Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
BS EN 14770:2012*BS 2000-536:2012 Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
BS EN 17643:2022 Bitumen and bituminous binders. Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR). BTSV test
21/30423946 DC BS EN 17643. Bitumen and bituminous binders. Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR). BTSV test
BS EN IEC 62343-5-2:2018 Dynamic modules. Test methods. 1 x N fixed-grid WSS. Dynamic crosstalk measurement

农业农村部, Original state tester

NY/T 3498-2019 Elemental analyzer method for determination of agricultural biomass raw material components

Professional Standard - Commodity Inspection, Original state tester

SN/T 3627-2013 Determination of melamine in liquefied raw milk for export.Polarography method
SN/T 2879-2011 Determination of fat solubility of solid and liquid substances

Society of Automotive Engineers (SAE), Original state tester

SAE AS396B-1958 Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)
SAE AS396B-2008 Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)
SAE AS441-1964 BANK AND PITCH INSTRUMENTS (Indicating Stabilized Type)(Gyroscopic Horizon, Attitude Gyro)(Turbine-Powered Subsonic Aircraft)
SAE AS441-1976 BANK AND PITCH INSTRUMENTS (Indicating Stabilized Type)(Gyroscopic Horizon, Attitude Gyro)(Turbine-Powered Subsonic Aircraft)

Sichuan Provincial Standard of the People's Republic of China, Original state tester

DB51/T 1847-2014 Technical regulations for ground fixed-point monitoring of grassland ecological protection subsidy and reward mechanism for ecological benefits
DB51/T 1963-2015 Technical specifications for remote sensing monitoring of ecological benefits of grassland ecological projects
DB51/T 1964-2015 Technical specifications for ground investigation of grassland ecological engineering ecological benefit monitoring
DB51/T 1230-2011 Meteorological Observation and Assessment of Grassland Ecology Part 2 Observation Specifications for Biological Elements of Grassland
DB51/T 1327-2011 Grassland Ecological Meteorological Observation and Evaluation Part 3: Grassland Meteorological Disaster Indicators
DB51/T 1965-2015 Technical Specifications for Ecological Effect Monitoring and Evaluation of Grassland Ecological Protection Subsidy and Reward Mechanism

Danish Standards Foundation, Original state tester

DS/EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
DS/EN ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles
DS/EN 15559:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd
DS/EN 14770:2012 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
DS/EN ISO 7278-1:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles

Association Francaise de Normalisation, Original state tester

NF T51-117-1*NF EN ISO 6721-1:2019 Plastics - Determination of dynamic mechanical properties - Part 1 : general principles
NF EN ISO 6721-1:2019 Plastiques - Détermination des propriétés mécaniques dynamiques - Partie 1 : principes généraux
NF T51-560:1990 Plastics. Determination of the rheological characteristics in the molten state. Capillaru rheometer method.
NF M08-003*NF EN ISO 7278-1:1996 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Part 1 : general principles.
NF EN ISO 22476-14:2020 Reconnaissance et essais géotechniques - Essais en place - Partie 14 : sondage dynamique en forage
NF M08-013*NF ISO 7278-4:1999 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Part 4 : guide for operators of pipe provers
NF T51-210:1985 PLASTICS. RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS. DETERMINATION OF BROOKFIELD RV VISCOSITY.
NF U42-121*NF EN 15475:2009 Fertilizers - Determination of ammoniacal nitrogen
NF EN 14770:2012 Bitumes et liants bitumineux - Détermination du module complexe en cisaillement et de l'angle de phase - Rhéomètre à cisaillement dynamique (DSR)
NF U42-142*NF EN 15476:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda
NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF UTE C15-755:2005 Fenêtres - Détermination de la résistance à la torsion statique
FD X43-131-2:2005 Fenêtres - Détermination de la résistance à la torsion statique
FD X43-131-3:2005 Fenêtres - Détermination de la résistance à la torsion statique
FD X43-131-6:2005 Fenêtres - Détermination de la résistance à la torsion statique
FD X43-131-7:2005 Fenêtres - Détermination de la résistance à la torsion statique
NF EN ISO 10426-3:2005 Fenêtres - Détermination de la résistance à la torsion statique
NF EN 14609:2005 Fenêtres - Détermination de la résistance à la torsion statique
NF T60-148:2003 Liquid petroleum products - Determination of the kinematic viscosity according to the temperature
NF EN ISO 7278-1:1996 Hydrocarbures liquides - Mesurage dynamique - Systèmes d'étalonnage des compteurs volumétriques - Partie 1 : principes généraux.
NF X20-531:1984 Natural gas. Determination of potential hydrocarbon liquid content. Part 1 : principles and general requirements.
NF EN 61143-1:1994 Appareils électriques de mesure - Enregistreurs X-t - Partie 1 : définitions et prescriptions.
NF EN 61143-1/A1:1998 Appareils électriques de mesure - Enregistreurs X-t - Partie 1 : définitions et prescriptions.
NF T66-074:2006 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR).
NF T66-074*NF EN 14770:2012 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR).
NF EN ISO 22476-7:2013 Reconnaissance et essais géotechniques - Essais en place - Partie 7 : essai au dilatomètre rigide diamétral

YU-JUS, Original state tester

JUS M.N0.302-1977 Road vehicles. Apparatus for measurement of the opacity of achaust gas from diesel engines operating un?er steady state conditions

Japanese Industrial Standards Committee (JISC), Original state tester

JIS C 1273-1:2011 Alternating-current static meters for reactive energy -- Part 1: General measuring instrument
JIS K 7244-1:1998 Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
JIS C 1271-1:2011 Alternating-current static meters for active energy -- Classes 1 and 2 -- Part 1: General measuring instrument
JIS R 2016-2:2009 Methods for determination of sulfur in refractory products and raw materials -- Part 2: Instrumental analysis
JIS T 1190:1987 Stabilometers
JIS C 1272-1:2011 Alternating-current static meters for active energy -- Classes 0.2 S and 0.5 S -- Part 1: General measuring instrument
JIS K 0801:1986 Continuous turbidimeter
JIS B 7614:2010 Instruments for measuring the areas of leathers
JIS P 8147:2010 Paper and board -- Determination of the static and kinetic coefficients of friction
JIS B 7901:1998 Geodetic instruments -- Levels -- Field procedures for determining accuracy
JIS B 7909:1998 Geodetic instruments -- Theodolites -- Field procedures for determining accuracy
JIS Z 4511:1991 Methods of calibration for exposure meters and dose-equivalent meters

SE-SIS, Original state tester

SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SS IEC 295:1983 Nuclear instrumentation - D.C. periodmeters: characteristics and test methods
SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices

ISA - International Society of Automation, Original state tester

ISA S26-1968 Dynamic Response Testing of Process Control Instrumentation
ISA 26-1968 Dynamic Response Testing of Process Control Instrumentation

IT-UNI, Original state tester

UNI 7621-1976

国家质量监督检验检疫总局, Original state tester

SN/T 4481-2016 General Principles for Ecological Origin Product Protection Assessment
SN/T 4756-2017 Technical specifications for ecological origin product protection assessment
SN/T 4432-2016 Determination of Density, Relative Density and API Gravity of Crude Oil and Liquid Petroleum Products Thermohydrometer Method

Professional Standard - Forestry, Original state tester

LY/T 2509-2015 Indicator system for long-term observation of alpine desert ecosystem in Qinghai-Tibet Plateau
LY/T 3318-2022 Technical specifications for monitoring and evaluating benefits of grassland ecological construction projects

Professional Standard - Tobacco, Original state tester

YC/T 7-1993 Model naming principles of smoke testing instruments

AENOR, Original state tester

UNE-EN 13131:2000 LIQUID PETROLEUM PRODUCTS. DETERMINATION OF NICKEL AND VANADIUM CONTENT. ATOMIC ABSORPTION SPECTROMETRIC METHOD.
UNE-EN ISO 6721-1:2012 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
UNE-EN ISO 3675:1999 CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS. LABORATORY DETERMINATION OF DENSITY. HYDROMETER METHOD. (ISO 3675:1998).
UNE 84630:1998 COSMETIC RAW MATERIALS. DETERMINATION OF SOLID PARAFFINES IN LIQUID SATURATED HYDROCARBONS OBTAINED FROM OIL.
UNE 84631:2012 Cosmetic raw materials. Determination of polycyclic aromatic hydrocarbons in liquid saturated hydrocarbons obtained from oil.
UNE-EN 15559:2009 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd
UNE-EN 14770:2012 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)

Military Standard of the People's Republic of China-General Armament Department, Original state tester

GJB 570.3-1988 Data acquisition and processing for static testing of meteorological instrument finalization test methods
GJB 5924-2007 Specincation for dry state tester for reserve batterry for ground to ground missile
GJB 570.13-1988 Meteorological instrument final test method cloud meter
GJB/J 3354-1998 Calibration procedures for stray light coefficient measuring instrument
GJB 3354A-2019 Calibration procedures for stray light coefficient measuring instrument

VN-TCVN, Original state tester

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments
TCVN 5732-1993 Crude oil.Determination of vanadium content by atomic absorption spectrocopy
TCVN 5383-1991 Crude oil.Determination of nikel content by atomic absorption spectroplotometry
TCVN 4914-2007 Coal.Determination of forms of sulfur
TCVN 5384-1991 Crude oil.Determination of sodium and potassium content by atomic absorption spectrophotometry
TCVN 5385-1991 Crude oil.Determination of calcium and magnesium content by atomic absorption spectrophotometry

Inner Mongolia Provincial Standard of the People's Republic of China, Original state tester

DB15/T 2382-2021 Core Data Specification for Grassland Ecological Restoration Monitoring
DB15/T 2383-2021 Classification of Monitoring and Evaluation Indexes for Grassland Ecological Restoration
DB15/T 2913-2023 Configuration requirements for automatic observers of land ecological meteorological stations
DB15/T 2381-2021 Technical regulations for monitoring the implementation effect of grassland ecological restoration projects

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Original state tester

GJB 6241-2008 Test method of dynamic parameters of laser beam-riding guidance instrument

American Society for Testing and Materials (ASTM), Original state tester

ASTM D7654/D7654M-10 Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM E1770-19 Standard Practice for Optimization of Instrumentation for Graphite Furnace Atomic Absorption Spectrometry
ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E1364-95(2005) Standard Test Method for Measuring Road Roughness by Static Level Method
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D6774-22 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D5588-97(2002) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM D5588-97 Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM D5588-97(2008) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM D5588-97(2012) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
ASTM F448-99(2005) Test Method for Measuring Steady-State Primary Photocurrent
ASTM F448-99 Test Method for Measuring Steady-State Primary Photocurrent
ASTM F1755M-96(2018) Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM E3277-23 Standard Test Method for Determining the Liquid or Solid State of a Material by Rheometry
ASTM D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7112-09 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7380/D7380M-21 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 2.3-kg [5-lbm] Dynamic Cone Penetrometer
ASTM D7654/D7654M-10(2018) Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM D1298-99 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-99e2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D129-64(1978) Standard Test Method for Sulfur In Petroleum Products (General Bomb Method)
ASTM D129-95 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
ASTM D1298-99(2005) Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12b Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12a Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D12-88(1998) Hydrometer method to determine the density, relative density and API fuel specific gravity of crude oil and liquid petroleum products
ASTM D7380-15 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM D7112-05 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-05a Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

International Electrotechnical Commission (IEC), Original state tester

IEC 60231G:1977 General principles of nuclear reactor instrumentation. Seventh supplement: Liquid-metal cooled fast reactor

Professional Standard - Machinery, Original state tester

JB/T 6177-1992 Melting point determination apparatus
JB/T 20155-2013 Osmometer
JB/T 12453-2015 Latex misture tester
JB/T 9394-2011 Non-destructive testing instruments.Specifications for the X-ray stressometers

Professional Standard - Light Industry, Original state tester

QB 1055-1991 Thickness Meter
QB/T 1060-2012 Softness tester
QB/T 1060-1998 Softness Tester
QB 1050-1991 Tear Tester
QB 1060-1991 Softness Tester
QB/T 1047-1998 Paper and board quantitative tester
QB/T 1051-2012 Board bending resistance tester
QB/T 1051-1998 Cardboard Stiffness Tester
QB/T 1052-1991 Incipient wet strength tester
QB/T 1676-1992 Manual Fat Analyzer
QB/T 1054-2004 Pulps-Tester of beating degree
QB/T 1668-2012 Cobb absorption tester
QB/T 1668-1992 Kebo Absorbency Tester
QB/T 1054-1998 Pulp beating degree tester
QB 1049-1991 MIT type folding endurance tester
QB 1051-1991 Taber Stiffness Tester
QB 1054-1991 Pulp beating degree tester
QB 1058-1991 Printing suitability tester
QB/T 5837-2023 Micrometer for tissue paper

工业和信息化部, Original state tester

JB/T 20204-2022 Melting point analyzer
JB/T 20202-2022 Clarity tester
QB/T 1047-2017 Paper and cardboard quantitative measuring instrument

PL-PKN, Original state tester

PN T06513-02-1990 Measurement of redox potential value Industrial analyzers
PN T06513-03-1989 Redox potential value Laboratory measuring instruments General reguirements and tests
PN C04576 ArkusZ02-1973 Water and waste water Tests for nitrogen Determination of ammonium nitrogen by titrimetric method
PN C04105-1990 Crude petroleum Determination of paraffin content
PN P04675-07-1989 Cotton Determination of reducing sugars

水利部, Original state tester

SL/T 756-2017 Calibration method of special instruments for geotechnical in-situ testing

CZ-CSN, Original state tester

CSN 03 8824-1971 Damp heat test - steady state
CSN 38 5528-1986 Gaseous fuels. Determination of tar
CSN 62 1481-1983 Determination of rubber elasticity on a Lupke tester
CSN 49 0137-1983 Wood. Determination of dynamic hardness
CSN 63 1511-1983 Testing of tyres. Determination of static radial stiffness and static tyre radius
CSN 65 4833-1982 Minerál Fertilizers Determination of Nitrie Nitrogen by Titrimetric Method

Professional Standard - Business, Original state tester

SB/T 10318-1999 Analysis of ammoniacal nitrogen

Professional Standard - Ferrous Metallurgy, Original state tester

YB/T 162-1999 Verification regulation of dynamical resistance strain gauge indicator for low frequency response
YB/T 162-2012 Verification rules for low cycle frequency response of dynamic resistance strain gauge

Standard Association of Australia （SAA）, Original state tester

AS 2300.2.10:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of titratable acidity
AS 2300.2.7:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of calcium
AS 2300.2.8:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of chloride
AS 2300.2.9:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of phosphorus
AS/NZS ISO 7176.1:2015
AS/NZS 3696.1:2008 Wheelchairs - Determination of static stability
AS 2300.2.6:1988 Methods of chemical and physical testing for the dairying industry - Liquid milks - Determination of lactose

The American Road & Transportation Builders Association, Original state tester

AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)

AASHTO - American Association of State Highway and Transportation Officials, Original state tester

T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)
TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)

Indonesia Standards, Original state tester

SNI 06-6989.54-2005 Water and waste water - Part 54: Test methods of arsenic (As) content with atomic absorption spectrophotometers (AAS) by carbon stoves
SNI 06-6989.43-2005 Water and wastewater - Part 43: Test methods of zinc (Zn) content with atomic absorption spectrophotometers (AAS) by extraction
SNI 06-6989.41-2005 Water and waste water - Part 41: Test methods of manganese (Mn) content with atomic absorption spectrophotometers (AAS) by extraction

Professional Standard - Environmental Protection, Original state tester

HJ 910-2017 Determination of Gaseous Mercury in Ambient Air by Gold Film Enrichment Cold Atomic Absorption Spectrophotometry
HJ 917-2017 Determination of Gaseous Mercury in Exhaust Gases from Stationary Pollution Sources Activated Carbon Adsorption/Pyrolysis Atomic Absorption Spectrophotometry

Professional Standard - Traffic, Original state tester

JT/T 1151-2017 Sand equivalent tester

Professional Standard - Aquaculture, Original state tester

SC/T 7006-2001 Dissolved oxygen meter

Professional Standard - Railway, Original state tester

TB/T 3355-2014 Track geometry dynamic inspection and evaluation method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Original state tester

GB/T 33112-2016 Verification method of instruments devoted to geotechnical engineering prototype monitoring
GB/T 33061.10-2016 Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
GB/T 35582-2017 Sulfur and nitrogen elemental analyzers
GB/T 33095.1-2016 Rubber, unvulcanized—Measurement of rheological properties using rotorless shear rheometer— Part 1: Frequency sweep

Qinghai Provincial Standard of the People's Republic of China, Original state tester

DB63/T 2035-2022 Benefit monitoring and evaluation specifications for grassland ecological restoration projects

AT-ON, Original state tester

ONORM K 1103-1991 Wheelchairs — Determination of static stability
OENORM EN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test

CEN - European Committee for Standardization, Original state tester

PD CEN/TS 15559:2007 Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd

Professional Standard - Electron, Original state tester

SJ/T 10196-1991 Measuring methods of MSI and SSI digital IC static parameter testers

European Committee for Standardization (CEN), Original state tester

prEN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test
EN 15475:2009 Fertilizers - Determination of ammoniacal nitrogen
EN 14770:2023 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
EN 14609:2004 Windows - Determination of the resistance to static torsion

轻工业部, Original state tester

QB 1052-1991 Initial wet strength tester

ZA-SANS, Original state tester

SANS 402:2005 Coal - Determination of forms of sulfur

机械工业部, Original state tester

JB/T 7395.5-1994 Electrical measuring instruments terminology standard, detector, stable power supply and comparative measuring instrument

国家市场监督管理总局、中国国家标准化管理委员会, Original state tester

GB/T 41211-2021 General specifications for moon and planetary in-situ spectral detection instrument
GB/T 26985-2018 Standard test method for pour point of crude oils

Professional Standard - Electricity, Original state tester

DL/T 1954-2018 Calibration specification for partial discharge detector based on transient earth voltage method

National Electrical Manufacturers Association（NEMA), Original state tester

NEMA NTCIP 1203-1997 Object Definitions for Dynamic Message Signs (DMS) Formerly NEMA TS 3.6-1997

中国轻工总会, Original state tester

ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

Professional Standard - Petroleum, Original state tester

SY/T 0541-2009 Test method for gel point of crude oils
SY/T 0541-1994 Determination of the freezing point of crude oil
SY/T 7551-2004 crude oil pour point method

Professional Standard - Nuclear Industry, Original state tester

EJ/J 1-2007 Verification regulation for gamma-ray logger

Professional Standard - Building Materials, Original state tester

JC/T 962-2005 Tester for determining expansion of Le Chatelier needles

Professional Standard - Grain, Original state tester

LS/T 3703-1995 Wheat Flour Gluten Tester

European Committee for Electrotechnical Standardization（CENELEC）, Original state tester

EN 61400-25-1:2007 Fertilizers - Determination of cyanamide nitrogen
EN 61400-25-1:2017 Wind energy generation systems - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models

Association of German Mechanical Engineers, Original state tester

VDI 2100 Blatt 1-2008 Gaseous ambient air pollution measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Fundamentals

GOSTR, Original state tester

GOST 30473-1996 Wheelchairs. Method of determination for static stability

国家煤矿安全监察局, Original state tester

MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal