ZH
RU
ES

din of the control test

din of the control test, Total:500 items.

In the international standard classification, din of the control test involves: Valves, Hydraulic energy engineering, Analytical chemistry, Industrial automation systems, Sensory analysis, Quality, Linear and angular measurements, Mechanical testing, Electrical and electronic testing, Construction materials, Measurement of fluid flow, Test conditions and procedures in general, Fluid power systems, Motor cycles and mopeds, Nuclear energy engineering, Vocabularies, Air quality, Refractories, Structure and structure elements, Transport, Telecommunication systems, Transformers. Reactors, Farming and forestry, Equipment for petroleum and natural gas industries, Non-destructive testing, Aerospace engines and propulsion systems, Plastics, Materials for aerospace construction, Switchgear and controlgear, Medical sciences and health care facilities in general, Gas and steam turbines. Steam engines, Open systems interconnection (OSI), Telecommunications in general, Electronic tubes, Products of the textile industry, Radiocommunications, Aircraft and space vehicles in general, Space systems and operations, Road vehicle systems, Earth-moving machinery, Coals, Environmental testing, Paints and varnishes, Applications of information technology, Burners. Boilers, On-board equipment and instruments, Fuels, Footwear, Electrical accessories, Protection against fire, Veterinary medicine, Diagnostic, maintenance and test equipment, Automatic controls for household use, Metrology and measurement in general, Lamps and related equipment, Wind turbine systems and other alternative sources of energy, Software development and system documentation, Information technology (IT) in general, Passenger cars. Caravans and light trailers, Semiconductor devices, Integrated circuits. Microelectronics, Acoustics and acoustic measurements, Hand-held tools, Testing of metals, Power transmission and distribution networks, Special purpose vehicles, Machine tools, Electricity. Magnetism. Electrical and magnetic measurements, Electrical wires and cables, Power stations in general, Protection against electric shock, Agricultural machines, implements and equipment.


未注明发布机构, din of the control test

American Society of Mechanical Engineers (ASME), din of the control test

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., din of the control test

  • IEEE 2030.8-2018 The Testing of Microgrid Controllers
  • IEEE 532-2007 Guide for Selecting and Testing Jackets for Power@ Instrumentation@ and Control Cables
  • IEEE 498-1985 STANDARD REQUIREMENTS FOR THE CALIBRATION AND CONTROL OF MEASURING AND TEST EQUIPMENT USED IN NUCLEAR FACILITIES

International Telecommunication Union (ITU), din of the control test

  • ITU-T Z.166-2015 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI) (Study Group 17)
  • ITU-T Z.166-2012 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 control interface (TCI)
  • ITU-T Z.166-2011 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 control interface (TCI)
  • ITU-T Z.166-2013 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI) Study Group 17
  • ITU-T Z.166-2007 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI) Study Group 17
  • ITU-T Z.145 FRENCH-2006 Testing and Test Control Notation version 3 (TTCN-3): Control Interface (TCI)
  • ITU-T Z.161-2014 Testing and Test Control Notation version 3: TTCN-3 core language
  • ITU-T Z.161-2021 Testing and Test Control Notation version 3: TTCN-3 core language
  • ITU-T Z.171-2021 Testing and Test Control Notation version 3: Using JSON with TTCN-3
  • ITU-T Z.168-2011 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 mapping from CORBA IDL
  • ITU-T Z.168-2012 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 mapping from CORBA IDL
  • ITU-T Z.168-2007 Testing and Test Control Notation version 3: TTCN-3 mapping from CORBA IDL Study Group 17
  • ITU-R S.729-1992 Control and Monitoring Function of Very Small Aperture Terminals (VSATs) - Section 4B1 - Systems Aspects
  • ITU-T Z.169-2012 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 mapping from XML data definition
  • ITU-T H.248.17 CORR 1 FRENCH-2004 Gateway control protocol: Line test packages Corrigendum 1
  • ITU-T H.248.17 CORR 1 SPANISH-2004 Gateway control protocol: Line test packages Corrigendum 1
  • ITU-T Z.161.5-2014 Testing and Test Control Notation version 3: TTCN-3 Language extensions: Performance and real time testing
  • ITU-T Q.784 ANX A FRENCH-1993 TTCN Version of Recommendation Q.784
  • ITU-T Q.784 ANX A SPANISH-1993 TTCN Version of Recommendation Q.784
  • ITU-T Z.167-2008 Testing and Test Control Notation version 3: TTCN-3 mapping from ASN.1 Study Group 17
  • ITU-T Z.161-2011 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 core language
  • ITU-T Z.164-2011 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 operational semantics
  • ITU-T Z.161-2012 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 core language
  • ITU-T Z.142-2006 Testing and Test Control Notation version 3 (TTCN-3): Graphical presentation format (GFT) Study Group 17
  • ITU-T Z.161-2015 Testing and Test Control Notation version 3: TTCN-3 core language (Study Group 17)
  • ITU-T Z.168-2015 Testing and Test Control Notation version 3: The IDL to TTCN-3 mapping (Study Group 17)
  • ITU-T Z.167-2011 (Pre-Published) Testing and Test Control Notation version 3: (TTCN-3) mapping from ASN.1
  • ITU-T Z.144-2006 Testing and Test Control Notation version 3 (TTCN-3): Runtime interface (TRI) Study Group 17
  • ITU-T Z.145-2006 Testing and Test Control Notation version 3 (TTCN-3): Control Interface (TCI) Study Group 17
  • ITU-T Z.146-2006 Testing and Test Control Notation version 3 (TTCN-3): Using ASN.1 with TTCN-3 Study Group 17
  • ITU-T Z.143 FRENCH-2006 Testing and Test Control Notation version 3 (TTCN-3): Operational semantics Study Group 17
  • ITU-T Z.143 SPANISH-2006 Testing and Test Control Notation version 3 (TTCN-3): Operational semantics Study Group 17
  • ITU-T Z.161-2013 Testing and Test Control Notation version 3: TTCN-3 core language Study Group 17

Danish Standards Foundation, din of the control test

  • DS/EN 60308:2005 Hydraulic turbines - Testing of control systems
  • DS/EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
  • DS/EN 60546-2:2011 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
  • DS/EN 60534-8-3:2011 Industrial-process control valves – Part 8-3: Noise considerations – Control valve aerodynamic noise prediction method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., din of the control test

Japanese Industrial Standards Committee (JISC), din of the control test

  • JIS B 9940:1987 Testing methods of pH controlling equipments
  • JIS C 0704:1995 Insulation test for control gear
  • JIS B 3502:2021 Industrial-process measurement and control -- Programmable controllers -- Equipment requirements and tests
  • JIS B 8659-3:2015 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 3: Test methods for pressure control valves

Association Francaise de Normalisation, din of the control test

  • NF UTE C46-501:1983 Mesure et commande dans les processus industriels - Vannes de régulation - Essais et procédures de réception
  • UTE C46-501U*UTE C46-501:1983 Industrial-process measurement and control. Control values. Acceptance tests and procedures.
  • NF EN 60308:2005 Turbines hydrauliques - Essais des systèmes de régulation
  • NF EN 60546-2:2011 Régulateurs à signaux analogiques utilisés pour les systèmes de conduite des processus industriels - Partie 2 : recommandations pour les essais d'inspection et les essais individuels de série
  • NF C46-501:1983 Industrial-Process Measurement and Control Control valves Acceptance Tests and Procedures
  • NF C55-408*NF EN 60308:2005 Hydraulic turbines - Testing of control systems
  • NF EN 60534-9:2008 Vannes de régulation des processus industriels - Partie 9 : procédures d'essai pour la mesure de la réponse des vannes de régulation à des signaux d'entrée échelonnés
  • NF EN 60671:2011 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle commande importants pour la sûreté - Essais de surveillance
  • NF E48-440-3:2008 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3 : test methods for pressure control valves.
  • NF E71-101:1983 Propellant actuated fixing equipement. Tests.
  • NF EN 14584:2013 Essais non destructifs - Essais d'émission acoustique - Contrôle des équipements métalliques sous pression pendant l'épreuve - Localisation planaire des sources d'EA
  • NF C53-823*NF EN 62823:2016 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing
  • NF C53-823/A1*NF EN 62823/A1:2020 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing
  • NF EN 12414:2020 Équipement de contrôle du stationnement des véhicules - Exigences et méthodes d'essai pour un terminal de stationnement
  • NF ISO 19744:2022 Conditions d'essai des machines à brocher à commande numérique - Contrôle de l'exactitude - Machines verticales à brocher les extérieurs
  • NF EN 4662:2010 Série aérospatiale - Spécification d'essais pour des composants de contrôle en vibration

Association of German Mechanical Engineers, din of the control test

German Institute for Standardization, din of the control test

  • DIN 10976:2016 Sensory analysis - Difference from Control-Test (DfC-Test)
  • DIN 19225:1981 Measurement and control; terminology and classification of controllers
  • DIN V 19248:1999 Control technology - Testing for process measurement and control equipment on strength to ensure pressure safety of parts
  • DIN 19242-1:1987-01 Measurement and control; performance tests on process computer systems; time measurement; test procedures
  • DIN 4226-102:2017-08 Recycled aggregates for concrete in accordance with DIN EN 12620 - Part 102: Type testing and factory production control / Note: Applies in conjunction with DIN 4226-101 (2017-08), DIN EN 12620 (2008-07).
  • DIN 53919-2:1980 Test cotton fabrics for laundering process control; test of laundering with control stripes
  • DIN 32937:2018-04 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
  • DIN 19242-2:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: multiplication
  • DIN 4051:2002-04 Sewer clinkers - Requirements, testing, quality control
  • DIN 43718:1987 Measurement and control; front-frames and frontpanels of measurement and control equipment; principal dimensions
  • DIN 43719:1990-04 Measurement and control; mechanical grid system for the installation of measuring and control instruments
  • DIN 19242-1:1987 Measurement and control; performance tests on process computer systems; time measurement; test procedures
  • DIN 4739-2:2002 Control and safety devices for vaporizing oil burners - Electrical control devices - Part 2: Safety requirements and testing
  • DIN 19242-6:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: detection of a bit pattern
  • DIN IEC 60671 Berichtigung 1:2008 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing (IEC 60671:2007), Corrigendum to DIN IEC 60671 (VDE 0491-100):2007-12
  • DIN 19242-5:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: matrix inversion
  • DIN 19242-4:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: sine calculation
  • DIN 19242-3:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: conditional branch
  • DIN 18232-9:2021 Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9
  • DIN 43718:1987-05 Measurement and control; front-frames and frontpanels of measurement and control equipment; principal dimensions
  • DIN EN 60546-2:2011-04 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing (IEC 60546-2:2010); German version EN 60546-2:2010 / Note: DIN EN 60546-2 (1995-01) remains valid alongside this stand...
  • DIN 32937:2006 Control of inspection, measuring and test equipment - Plan, manage and use of inspection, measuring and test equipments
  • DIN 32937:2018 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
  • DIN 19242-10:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: dialogue response at the terminal
  • DIN 6858-2:2020-12 Quality control of multi-modal imaging - Part 2: Routine test SPECT/CT
  • DIN 6858-1:2014-10 Quality control of multi-modal imaging - Part 1: Routine test PET/CT
  • DIN EN 12414:2020-09 Vehicle parking control equipment - Requirements and test methods for a parking terminal; German version EN 12414:2020
  • DIN 3555:2020-08 Proportional Flow Controller for use in drinking water installations - Requirements and tests
  • DIN 19242-9:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: digital input and output
  • DIN 4281:1998-08 Concrete for prefabricated sewage units - Manufacture, requirements, testing and quality control
  • DIN 19242-7:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: interrupt handling with program start

YU-JUS, din of the control test

  • JUS M.C5.093-1987 Control valves. Routine test
  • JUS L.N4.050-1979 Control valves. Generalrequirements and tests
  • JUS C.A7.051-1997 Non-destruclive testing - Control ofproperties of ultrasonic test systems - Simple controls
  • JUS L.N4.205-1982 Methods of evaluating the performance of controllers with analogue signals for use in industrialprocess control
  • JUS N.K5.051-1982 Low voltage control svvitches. General reguirements and tests
  • JUS N.K5.010-1979 Low-voltage controlgear. Contacton. General reguirements and testing
  • JUS N.E3.829-1983 Test starter for the control of the performance and endurance at starterholders
  • JUS M.E3.482-1990 Mechanical contrcl damgers. Safety requirements and testings
  • JUS N.R9.050-1989 Piezoelectric devices for frequency selection and control. Spec ification for syn- betic cniartz crvstal, guide to fabrication and test netbods

SAE - SAE International, din of the control test

Society of Automotive Engineers (SAE), din of the control test

  • SAE J747B-1974 Control Valve Test Procedure
  • SAE J747-1986 HYDRAULIC CONTROL VALVE TEST PROCEDURE
  • SAE ARP217D-2021 Testing of Airplane Installed Environmental Control Systems (ECS)
  • SAE J661A-1967 BRAKE LINING QUALITY CONTROL TEST PROCEDURE
  • SAE J661A-1971 BRAKE LINING QUALITY CONTROL TEST PROCEDURE
  • SAE J900-1980 CRANKCASE EMISSION CONTROL TEST CODE
  • SAE ARP1070B-1991 Design and Testing of Antiskid Brake Control Systems For Total Aircraft Compatibility
  • SAE ARP1070B-2006 Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
  • SAE ARP1070C-2013 Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
  • SAE J900-1995 Crankcase Emission Control Test Code
  • SAE ARP217D-1999 Testing of Airplane Installed Environmental Control Systems (ECS)
  • SAE ARP1070C-2008 Design and Testing of Antiskid Brake Control Systems For Total Aircraft Compatibility
  • SAE ARP4904-1994(R2008) Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components
  • SAE J944A-1968 STEERING CONTROL SYSTEM — PASSENGER CAR — LABORATORY TEST PROCEDURE
  • SAE J944-2022 Steering Control System - Passenger Car - Laboratory Test Procedure

PL-PKN, din of the control test

  • PN E06154-1973 Low volfage control switches and control stations Requirements and tes?ing procedures
  • PN M73284-1993 Hydraulic fluid power. Vales controlling flow and pressure. Test methods
  • PN M42015-1989 Industrial automatics nd measurements neumatic controls eauirements and tests
  • PN W49052-1991 Manoeuvring-anchoring winches of chain type handly operated. MKLR. Requirements and tests
  • PN R74013-1970 Cerealt Preliminary control o? quali?y and organoleptic ?es?t
  • PN Z08110-06-1986 Industrial safety helmets Program of testing, ?uality control and valuation of a lot

RO-ASRO, din of the control test

  • STAS E 12671-1988 Ultrasonic testing ULTRASON IC CONTROL OF STEEL PIPES
  • STAS 2213/2-1984 SWEETS Rules for quality control and preparation ol samples for testing
  • STAS SR CEI 546-2-1987 Controllers with analogue signals for use in industrial - process control systems Part 2 : Guidance for inspection and routine testing
  • STAS 9245-1973 STRINGS Rules for quality control methods for testing, storage and transportation
  • STAS 12798/1-1990 Ultrasonic fault detection. Control of steel castings
  • STAS 12798/2-1990 Ultrasonic fault detection. Control of steel forgings
  • STAS SR EN 60068-2-64-1996 Environmental tesling Part 2: Test methods Test Fh: Vibration, broad-band randorn (digital control) and guidance
  • STAS SR ISO 7643:1995 Caravans and light trailers - Trailers of categories O1 and O2 with overrun brakes - Linear bench test methods for brakes controls

BELST, din of the control test

  • STB 2264-2012 Concrete testing. Nondestructive control of strength

AT-ON, din of the control test

  • ONORM M 1340-2001 Control of measuring and test equipment
  • ONORM M 1343-1995 Control of measuring and test equipment - Testing Instruction for dial gauges
  • ONORM M 1342-3-1994 Control of measuring and test equipment - Testing Instruction for internal micrometers
  • ONORM M 1347-1995 Control of measuring and test equipment - Testing Instruction for gap gauges
  • ONORM M 1342-2-1994 Control of measuring and test equipment - Testing Instruction for micrometer depth gauges
  • ONORM M 1341-1-1994 Control of measuring and test equipment - Testing Instruction for venier callipers
  • ONORM M 1346-1-1995 Control of measuring and test equipment - Testing Instruction for plug gauges
  • ONORM M 1341-2-1995 Control of measuring and test equipment — Testtng Instruction for vemier callipers for depht measurement
  • ONORM M 1342-1-1994 Control of measuring and test equipment - Testing Instruction for micrometer callipers for external measurement
  • ONORM M 1348-1995 Control of measuring and test equipment - Testing instruction for electrical linear measuring probes
  • ONORM M 1346-2-1995 Control of measuring and test equipment - Testing instruction for ring gauges and setting ring gauges
  • ONORM EN 215 Teil.1-1988 Thermostatic radiator valves; requirements and fest methods
  • ONORM M 7436-1989 Lubricants forgas valves and controls; requirements, feste

CZ-CSN, din of the control test

American Society for Testing and Materials (ASTM), din of the control test

  • ASTM D4832-02 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
  • ASTM C1108-99(2006) Standard Test Method for Plutonium by Controlled-Potential Coulometry
  • ASTM C1108-99 Standard Test Method for Plutonium by Controlled-Potential Coulometry
  • ASTM E1910/E1910M-04(2009) Test Method for Agricultural pH Control Agents
  • ASTM D4832-95e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
  • ASTM D4832-16e1 Standard test method for preparation and testing of controlled low strength material (CLSM) test cylinders
  • ASTM D4832/D4832M-23 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens
  • ASTM D6567-18 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)
  • ASTM D5311-92(2004) Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
  • ASTM D6525/D6525M-18 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
  • ASTM D6525/D6525M-16 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
  • ASTM C1108-12 Standard Test Method for Plutonium by Controlled-Potential Coulometry
  • ASTM C1108-23 Standard Test Method for Plutonium by Controlled-Potential Coulometry
  • ASTM D4832-16 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
  • ASTM F1833-97(2017) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
  • ASTM E1910-04 Test Method for Agricultural pH Control Agents
  • ASTM E1910/E1910M-21 Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity
  • ASTM E2554-18 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
  • ASTM E2554-18e1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
  • ASTM E606/E606M-19 Standard Test Method for Strain-Controlled Fatigue Testing
  • ASTM E606-92(1998) Standard Practice for Strain-Controlled Fatigue Testing
  • ASTM E606/E606M-21 Standard Test Method for Strain-Controlled Fatigue Testing
  • ASTM E606/E606M-19e1 Standard Test Method for Strain-Controlled Fatigue Testing
  • ASTM E606/E606M-12 Standard Test Method for Strain-Controlled Fatigue Testing

Korean Agency for Technology and Standards (KATS), din of the control test

  • KS B 0540-2001 Industrial-process control valves-Inspection and routine testing
  • KS B 0540-2014 Industrial-process control valves — Inspection and routine testing
  • KS B 6719-1994 Testing methods of pH controlling equipments
  • KS B 6719-2009(2019) Testing methods of pH controlling equipments
  • KS R 8006-2001(2011) METHOD OF STABILITY TEST FOR BICYCLES
  • KS C 1008-1987(1997) METHOD OF EVALUATING THE PERFORMANCE OF CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL PROCESS CONTROL
  • KS C 1008-1987 METHOD OF EVALUATING THE PERFORMANCE OF CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL PROCESS CONTROL
  • KS M 3090-1994(1999) STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING OF PLASTICS
  • KS B 6510-1991(2016) Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
  • KS C IEC 60308:2006 Hydraulic turbines-Testing of control systems
  • KS C IEC 60308:2021 Hydraulic turbines — Testing of control systems
  • KS B 6511-1991(2011) Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
  • KS B 0540-2014(2019) Industrial-process control valves — Inspection and routine testing
  • KS C IEC 61131-2:2022 Industrial-process measurement and control — Programmable controllers — Part 2: Equipment requirements and tests
  • KS B 7068-2002(2022) Test code for accuracy of X－Y table for control position
  • KS B 4224-2007(2012) Test code for performance and accuracy of numerically controlled external cylindrical and universal grinding machines
  • KS F 2581-2013(2018) Standard test method for determination of aggregates impacting value?Method of test for production control of aggregate
  • KS B 4207-2007(2012) Test code for performance and accuracy of numerically controlled lathes
  • KS B 7068-2002 Test code for accuracy of X-Y table for control position
  • KS F 2581-2008 Testing Method for determination of aggregates impactingMethod of test for production control of aggregate
  • KS F 2581-2013 Standard test method for determination of aggregates impacting value ? Method of test for production control of aggregate

(U.S.) Ford Automotive Standards, din of the control test

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, din of the control test

  • ITU-T Z.166-2014 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI) (Study Group 17)
  • ITU-T Z.166-2017 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI) (Study Group 17)
  • ITU-T Z.166-2016 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI) (Study Group 17)
  • ITU-T Z.168-2017 Testing and Test Control Notation version 3: The IDL to TTCN-3 mapping (Study Group 17)
  • ITU-T Z.141-2003 Testing and Test Control Notation version 3 (TTCN-3): Tabular presentation format SERIES Z: LANGUAGES AND GENERAL SOFTWARE ASPECTS FOR TELECOMMUNICATION SYSTEMS Formal description techniques (FDT) – Testing and Test Control Notation (TTCN) (Study Group 17
  • ITU-T Z.142-2003 Testing and Test Control Notation version 3 (TTCN-3): Graphical presentation format SERIES Z: LANGUAGES AND GENERAL SOFTWARE ASPECTS FOR TELECOMMUNICATION SYSTEMS Formal description techniques (FDT) – Testing and Test Control Notation (TTCN) (Study Group
  • ITU-T Z.169-2011 Testing and Test Control Notation version 3: TTCN-3 mapping from XML data definition (Study Group 17)

SE-SIS, din of the control test

  • SIS SS IEC 546:1982 Process control - Controllers with analogue signals for industrial use - Tests
  • SIS SS 11 01 35-1984 Grey cast iron - Sampling for tensile testing, hardness testing and microstructure control

American National Standards Institute （ANSI), din of the control test

Indonesia Standards, din of the control test

ISA - International Society of Automation, din of the control test

CU-NC, din of the control test

  • NC 92-45-1987 Quality Control. Reliability Characteristics of Test Planes
  • NC 92-01-4-1987 Quality Control. Product Tests. Terms and Definitions

AENOR, din of the control test

  • UNE 40225-2:1974 IN PERIODICAL CONTROLS OF THE ELECTRONIC EVENESS TESTER.
  • UNE 80407:2014 Metrological control of measuring equipment used in the cement test
  • UNE-EN 60308:2006 Hydraulic turbines - Testing of control systems (IEC 60308:2005).
  • UNE-ISO 17063:2008 Earth-moving machinery -- Braking systems of pedestrian-controlled machines -- Performance requirements and test procedures.

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, din of the control test

Military Standard of the People's Republic of China-General Armament Department, din of the control test

  • GJB 2366-1995 Quality control of trial production process
  • GJB 1377.1-1992 Radar antenna control and synchronization subsystem performance test method Antenna control performance
  • GJB 8798-2015 Test method for spin-stabilized satellite control system
  • GJB 2324A-2021 Torpedo acoustic homing and control system testing and simulation test methods
  • GJB 2324-1995 Torpedo acoustic homing and control system testing and simulation test methods
  • GJB 4401-2002 Space flight test launch quality control procedures and requirements

British Standards Institution (BSI), din of the control test

  • BS ISO 21622-2:2023 Irrigation techniques. Remote monitoring and control for irrigation. Tests
  • 13/30261384 DC BS EN 50344. Routine tests for controls within the scope of the EN 60730 series
  • BS EN 60308:2005 Hydraulic turbines - Testing of control systems
  • BS EN 62271-101:2006+A1:2010 High-voltage switchgear and controlgear. Synthetic testing
  • BS EN 62271-101:2006 High-voltage switchgear and controlgear - Synthetic testing
  • BS EN 60534-4:2006 Industrial-process control valves - Inspection and routine testing
  • BS EN IEC 60534-4:2022 Industrial-process control valves - Inspection and routine testing
  • BS ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-port directional flow-control valves
  • 21/30404149 DC BS ISO 1352. Metallic materials. Torque-controlled fatigue testing
  • BS EN 60534-9:2007 Industrial-process control valves - Test procedure for response measurements from step inputs
  • BS EN ISO 8437-2:2021 Snow throwers. Safety requirements and test procedures - Pedestrian-controlled snow throwers
  • BS EN 62442-3:2014 Energy performance of lamp controlgear. Controlgear for halogen lamps and LED modules. Method of measurement to determine the efficiency of the controlgear
  • BS EN 60534-8-3:2011 Industrial-process control valves. Noise considerations. Control valve aerodynamic noise prediction method
  • BS EN 62442-1:2011 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
  • BS EN 62442-1:2012 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
  • BS EN 62271-101:2013 High-voltage switchgear and controlgear. Synthetic testing
  • BS ISO 1352:2021 Tracked Changes. Metallic materials. Torque-controlled fatigue testing
  • BS EN 61010-2-032:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
  • BS EN 61010-2-032:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

Institute of Environmental Sciences and Technology, din of the control test

ES-UNE, din of the control test

  • UNE-EN 61064:1992 ACCEPTANCE TESTS FOR STEAM TURBINE SPEED CONTROL SYSTEMS (Endorsed by AENOR in November of 1995.)
  • UNE-EN 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing (Endorsed by AENOR in January of 2011.)
  • UNE-EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing (Endorsed by AENOR in November of 2011.)
  • UNE-EN 12414:2021 Vehicle parking control equipment - Requirements and test methods for a parking terminal
  • UNE-EN 4662:2010 Aerospace series - Test specification for vibration control components (Endorsed by AENOR in May of 2010.)
  • UNE 318002-2:2022 Irrigation techniques -- Remote monitoring and control for irrigation—Part 2: Tests

Standard Association of Australia （SAA）, din of the control test

ETSI - European Telecommunications Standards Institute, din of the control test

  • ES 201 873-6-2016 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.8.1)
  • ES 201 873-6-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.2.1)
  • ES 201 873-6-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.5.1)
  • ES 201 873-6-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V3.2.1)
  • ES 201 873-6-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.6.1)
  • ES 201 873-6-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V3.2.1)
  • ES 201 873-6-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.2.5)
  • ES 201 873-6-2019 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.11.1)
  • ES 201 873-6-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V1.1.1)
  • ES 201 873-6-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.4.0)
  • ES 201 873-6-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interfaces (TCI) (V3.3.1)
  • ES 201 873-6-2018 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.10.1)
  • ES 201 873-6-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.1.1)
  • ES 201 873-6-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.9.1)
  • ES 201 873-6-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V3.1.1)
  • ES 201 873-6-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.7.1)
  • TS 102 369-2004 Methods for Testing and Specification (MTS); Stream Control Transmission Protocol (SCTP); Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • TS 102 695-3-2012 Smart Cards; Test specification for the Host Controller Interface (HCI); Part 3: Host Controller features (V8.3.0; Release 8)
  • TS 102 695-3-2011 Smart Cards; Test specification for the Host Controller Interface (HCI); Part 3: Host Controller features (V8.0.0; Release 8)
  • TS 102 695-3-2016 Smart Cards; Test specification for the Host Controller Interface (HCI); Part 3: Host Controller features (V11.0.0; Release 11)
  • TS 102 695-3-2013 Smart Cards; Test specification for the Host Controller Interface (HCI); Part 3: Host Controller features (V9.1.0; Release 9)
  • TS 102 695-3-2010 Smart Cards; Test specification for the Host Controller Interface (HCI); Part 3: Host Controller features (V7.0.0; Release 7)
  • TS 102 695-3-2019 Smart Cards; Test specification for the Host Controller Interface (HCI); Part 3: Host Controller features (V12.0.0; Release 12)
  • ES 201 873-8-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping
  • TS 102 995-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Proforma for TTCN-3 reference test suite (V1.1.1; Includes Diskette)
  • ES 201 873-8-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V4.2.1)
  • ES 201 873-8-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V3.3.1)
  • ES 201 873-8-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V4.5.1)
  • ES 201 873-8-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V4.6.1)
  • ES 201 873-8-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V4.4.1)
  • ES 201 873-8-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V3.2.1)
  • ES 201 873-8-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V4.3.1)
  • ES 201 873-8-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V4.7.1)

United States Navy, din of the control test

RU-GOST R, din of the control test

  • GOST R 52007-2003 Carbon manufactured articles. Acoustik methods of control. Testing of acoustik waves velocity
  • GOST R 52721-2007 Traffic control devices. Test methods for roadside barriers
  • GOST R 53402-2009 Pipeline valves. Methods of control and testing
  • GOST 12910-1979 Single-bucket universal excavators. Methods of control tests
  • GOST R 52849-2007 Vehicles. Chambers of pneumatic brake controls. Technical requirements and test methods
  • GOST IEC 60730-2-1-1995 Automatic electrical controls for household and similar use. Particular requirements for electrical controls for electrical household appliances and test methods
  • PNST 188-2017 Measurement procedures for operational control of instruments for activity measurement
  • GOST R IEC 730-2-9-1994 Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls and test methods

US-FCR, din of the control test

European Telecommunications Standards Institute (ETSI), din of the control test

  • ETSI ES 201 873-6-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) V1.1.1
  • ETSI ES 201 873-6-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) V3.2.1
  • ETSI ES 201 873-6-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) V3.1.1
  • ETSI ES 201 873-6-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) V3.4.1
  • ETSI ES 201 873-6-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) V4.1.1
  • ETSI ES 201 873-6-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) V4.2.1
  • ETSI ES 201 873-6-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI) (V4.7.1)
  • ETSI ES 201873-8 V 4.8.1-2021 Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - Part 8: The IDL to TTCN-3 Mapping
  • ETSI TS 102 369-2004 Methods for Testing and Specification (MTS); Stream Control Transmission Protocol (SCTP); Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • ETSI ES 201 873-8-2021 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping (V4.8.1)
  • ETSI TS 102 695-3-2016 Smart Cards; Test specification for the Host Controller Interface (HCI); Part 3: Host Controller features (V11.0.0; Release 11)
  • ETSI ES 203790 V 1.3.1-2021 Methods for Testing and Specification (MTS) - The Testing and Test Control Notation version 3 - TTCN-3 Language Extensions: Object-Oriented Features

Instrument Society of America (ISA), din of the control test

Professional Standard - Post and Telecommunication, din of the control test

  • YD/T 1663-2007 Testing Methods for Bearer Independent Call Control
  • YD/T 1444-2006 Test methods for stream control transmission protocol (SCTP)
  • YD/T 2422-2012 Testing method for media gateway control protocol based on H.248
  • YD/T 1609-2007 Testing Methods for Media Gateway Control Protocol (MGCP)

GOSTR, din of the control test

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), din of the control test

National Metrological Verification Regulations of the People's Republic of China, din of the control test

National Electrical Manufacturers Association（NEMA), din of the control test

  • NEMA HP 100-1991 High Temperature Instrumentation and Control Cables
  • NEMA ICS 5 ANNEX F-2002 Industrial Control and Systems: High Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices (Annex F-2002)

Professional Standard - Petroleum, din of the control test

Institute of Electrical and Electronics Engineers (IEEE), din of the control test

  • IEEE Std 2030.8-2018 IEEE Standard for the Testing of Microgrid Controllers
  • IEEE P2030.8/D12, March 2018 IEEE Draft Standard for the Testing of Microgrid Controllers
  • IEEE P2030.8/D10, December 2017 IEEE Draft Standard for the Testing of Microgrid Controllers
  • IEEE P2030.8/D11, February 2018 IEEE Draft Standard for the Testing of Microgrid Controllers
  • IEEE P2030.8/D13, March 2018 IEEE Draft Standard for the Testing of Microgrid Controllers
  • IEEE 2665-2022 IEEE Recommended Practice for Statistical Process Control for EMC Test Laboratories
  • IEEE Std 2665-2022 IEEE Recommended Practice for Statistical Process Control for EMC Test Laboratories
  • IEEE 498-1990 Requirements for the calibration and control of measuring and test equipment used in nuclear facilities
  • ANSI/IEEE Std 675-1982 IEEE Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)
  • ANSI/IEEE Std 498-1985 IEEE Standard Requirements for the Calibration and Control of Measuring and Test Equipment Used in Nuclear Facilities
  • IEEE Std 498-1990 IEEE Standard Requirements for the Calibration and Control of Measuring and Test Equipment Used in Nuclear Facilities
  • IEEE 532-2021 IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
  • IEEE P2665/D2, May 2022 IEEE Draft Recommended Practice for Statistical Process Control for EMC Test Laboratories
  • IEEE Std 1474.4-2011 IEEE Recommended Practice for Functional Testing of a Communications-Based Train Control (CBTC) System
  • IEEE 1865.1-2019 IEEE Standard Specifications for Maintenance and Test of Distributed Control Systems in Thermal Power Stations: Maintenance and Testing
  • IEEE Std 1865.1-2019 IEEE Standard Specifications for Maintenance and Test of Distributed Control Systems in Thermal Power Stations: Maintenance and Testing
  • IEEE 74-1958 IEEE Standard Test Code for Industrial Control (600 Volts or Less)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, din of the control test

  • GB/T 11259-2015 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
  • GB/T 3789.23-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 control ability
  • GB/T 31429-2015 Guide for quality management in a coal laboratory
  • GB/T 22914-2008 Control and monitoring of SPF swine pathogens
  • GB/T 43061-2023 Semiconductor integrated circuit PWM controller testing method
  • GB/T 32483.1-2016 Energy performance of lamp controlgear.Part 1:Controlgear for fluorescent lamps.Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

American Gear Manufacturers Association, din of the control test

  • AGMA 13FTM12-2013 Practical Considerations for the Use of Double Flank Testing for the Manufacturing Control of Gearing

AGMA - American Gear Manufacturers Association, din of the control test

  • 13FTM12-2013 Practical Considerations for the Use of Double Flank Testing for the Manufacturing Control of Gearing

Defense Logistics Agency, din of the control test

American Concrete Institute, din of the control test

  • ACI 363.2R-1998 Guide to Quality Control and Testing of High-Strength Concrete

U.S. Air Force, din of the control test

HU-MSZT, din of the control test

Lithuanian Standards Office , din of the control test

  • LST EN 60308-2005 Hydraulic turbines. Testing of control systems (IEC 60308:2005)
  • LST EN 61064-2001 Acceptance tests for steam turbine speed control systems (IEC 61064:1991)

Beijing Provincial Standard of the People's Republic of China, din of the control test

  • DB11/T 1795-2020 Quality control specification for sound source localization test

ES-AENOR, din of the control test

工业和信息化部, din of the control test

  • YD/T 3527-2019 Positioning system equipment testing method based on LTE control plane

Group Standards of the People's Republic of China, din of the control test

  • T/YH 1013-2020 Requirements for the polarity test of satellite control subsystem
  • T/YH 1014-2020 Requirements for the in-orbit test of satellite control subsystem
  • T/CASMES 45-2022 Function test system of blower inverter controller
  • T/SDIRAA 032-2021 Ocean data quality control system test specification
  • T/GDCKCJH 060-2022 Testing method for automatic testing line of vehicle domain control unit
  • T/CES 170-2022 Technical specification for test of automatic generation control and automatic voltage control systems in electrochemical energy storage power station
  • T/CESA 1219-2022 Test methods for server BMC
  • T/CSAE 41-2015 Electric vehicle controller test and evaluation specification
  • T/WZBF 001-2021 Fugitive detection and control of valves

U.S. Military Regulations and Norms, din of the control test

Professional Standard - Coal, din of the control test

国家林业和草原局, din of the control test

  • LY/T 3127-2019 Forestry application system quality control and testing

KR-KS, din of the control test

  • KS C IEC 60308-2021 Hydraulic turbines — Testing of control systems
  • KS C IEC 61131-2-2022 Industrial-process measurement and control — Programmable controllers — Part 2: Equipment requirements and tests
  • KS F 2581-2013(2023) Standard test method for determination of aggregates impacting value?Method of test for production control of aggregate

International Electrotechnical Commission (IEC), din of the control test

  • IEC 60308:2005 Hydraulic turbines - Testing of control systems
  • IEC 60729:1982 Multiple controllers in a CAMAC crate
  • IEC 62442-3:2014 Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear
  • IEC 60671:2007 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing

International Organization for Standardization (ISO), din of the control test

  • ISO 10770-3:2020 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
  • ISO 21622-2:2023 Irrigation techniques — Remote monitoring and control for irrigation — Part 2: Tests

The Aluminum Association, din of the control test

  • AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

NEMA - National Electrical Manufacturers Association, din of the control test

  • NEMA WC 53-1990 Standard Test Methods for Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test

Professional Standard - Electricity, din of the control test

  • DL/T 1142-2009 Software test for reactor control system of nuclear power plants
  • DL/T 2563-2022 Distributed energy automatic generation control and automatic voltage control system test technical specification
  • DL/T 1990-2019 Test method of SO3 in flue gas of thermal power plant Controlled condensation method

Professional Standard - Navy, din of the control test

  • HJB 111-1994 The application software testing for naval ship's command and control systems

Professional Standard - Aerospace, din of the control test

  • QJ 2463-1993 Three-axis stabilized satellite control system test method
  • QJ 1855-1990 Ballistic missile control system unit test specification
  • QJ 823-1984 Multiple Controllers in a Computerized Automatic Measurement and Control (CAMAC) Enclosure
  • QJ 2958-1997 Specifications for design of surface-to-surface missile test launch console
  • QJ 2277A-2004 Launch site testing method for control system of ground missiles

GB-REG, din of the control test

Underwriters Laboratories (UL), din of the control test

  • UL 991-1989 Tests for safety-related controls employing solid-state devices
  • UL 991-1995 Tests for safety-related controls employing solid-state devices
  • UL 991 BULLETIN-2000 UL Standard for Safety Tests for Safety-Related Controls Employing Solid-State Devices

BE-NBN, din of the control test

VE-FONDONORMA, din of the control test

European Committee for Electrotechnical Standardization（CENELEC）, din of the control test

  • EN 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
  • EN 62823:2015 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing

CENELEC - European Committee for Electrotechnical Standardization, din of the control test

  • EN 60546-2:1993 Controllers with Analogue Signals for Use in Industrial-Process Control Systems Part 2: Guidance for Inspection and Routine Testing

Professional Standard - Electron, din of the control test

  • SJ/T 11315-2005 Specifications for conformance test on the interface for home control sub-network
  • SJ/T 11681-2017 Source code defect control and testing guidelines for C#
  • SJ/T 11683-2017 Source code defect control and testing guidelines for Java
  • SJ/T 11682-2017 Source code defect control and testing guidelines for C/C++

Taiwan Provincial Standard of the People's Republic of China, din of the control test

  • CNS 13656-1996 Lot-Control Testing for Photodiode(for Communication)
  • CNS 13653-1996 Lot-Control Testing for Light Emitting Diode(for Communication)
  • CNS 13650-1996 Lot-Control Testing for Laser Diode(for Communication)

中国石油天然气总公司, din of the control test

  • SY 5066.2-1993 Ground control device for formation tester for oil and gas fields

National Association of Corrosion Engineers (NACE), din of the control test

  • NACE 5A195-1995 State-of-the-Art Report on Controlled-Flow Laboratory Corrosion Tests (Item No. 24187)

Shanxi Provincial Standard of the People's Republic of China, din of the control test

  • DB14/T 1981-2020 Internal quality control reference material control method for the validity of test results

Inner Mongolia Provincial Standard of the People's Republic of China, din of the control test

  • DB15/T 1336-2018 Coal chemical industry intelligent control system test and acceptance specification

国家市场监督管理总局、中国国家标准化管理委员会, din of the control test

  • GB/T 39360-2020 Evaluation and testing of performance of industrial robot control system

  Quality control of the testing process, din of the control test.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved