ZH
RU
ES

Absolute Count Quantitative Detection

Absolute Count Quantitative Detection, Total:90 items.

In the international standard classification, Absolute Count Quantitative Detection involves: Microbiology, Water quality, Electricity. Magnetism. Electrical and magnetic measurements, Protection of and in buildings, Metrology and measurement in general, Measurement of volume, mass, density, viscosity, Measurement of force, weight and pressure, Rubber and plastics products, Quality, Construction materials, Rubber, Radiation measurements, Paints and varnishes, Protection against fire, Photography, Insulating materials, Fibre optic communications, Processes in the food industry, Semiconducting materials, Glass, Radiation protection, Air quality.

National Metrological Verification Regulations of the People's Republic of China, Absolute Count Quantitative Detection

JJG 690-2003 Verification Regulation of High Insulation Resistance Meters
JJG 1100-2014 Gas-Flow Proportional Counter Gross Alpha and Gross Beta Measuring Instruments

ZA-SANS, Absolute Count Quantitative Detection

SANS 11731-2:2009 Water quality - Detection and enumeration of Legionella Part 2: Direct membrane filtration method for waters with low bacterial counts

Professional Standard - Navy, Absolute Count Quantitative Detection

HJB 449.13-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 13:Insulating examination
HJB 449.9-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 9:Connecting apparatus
HJB 449.18-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 18:Handling and analyzing apparatus for keeping track of statistics

RU-GOST R, Absolute Count Quantitative Detection

GOST R 8.768-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of relative permittivity and relative permeability at frequency range from 1 MHz to 18 GHz
GOST 8.510-2002 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass of liquid
GOST 8.510-1984 State system for ensuring the uniformity of measurements. State verification schedule for means measuring (meters) volume of liquid
GOST 8.223-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification for means measuring absolute pressure within the range of 2,7·10 in 2 degree to 4000·10 in 2 degree Pa
GOST R 8.762-2011 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the distortion coefficient
GOST 8.107-1981 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring absolute pressure within the range of 1·10 in minus 8 degree up to 1·10 in 3 degree Pa
GOST ISO 11843-3-2005 Statistical methods. Capability of detection. Methodology for determination of the critical value for the response variable when no calibration data are used
GOST 8.308-1978 State system of ensuring the uniformity of measurements. Functional units, sub-assemblies and devices in instruments for measurement of ionizing radiation. Counters of pulses. Methods and means of verification
GOST 8.412-1981 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring relative dielectric constant at frequency 1-200 MHz
GOST R 55027-2012 Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter spp. Part 3. Semi-quantitative method
GOST 8.284-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measuring of relative dielectric constant of liquids, solid and gases at frequencies 1 - 10 GHz
GOST 8.403-1980 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring of relative dielectric constant of solid and liquids at frequencies from 1·10 up to 1·10 in 7 degree Hz

German Institute for Standardization, Absolute Count Quantitative Detection

DIN 52619-3:1985 Testing of thermal insulation; determination of the thermal resistance and the thermal transmission coefficient of windows; determination on frames
DIN 53529-4:1991 Testing of rubber; curemetry; determination of vulcanization characteristics with the oscillating disc curemeter
DIN 25482-6:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements with allowance for the influence of sample treatment and equipment used
DIN EN ISO 11731-2:2008 Water quality - Detection and enumeration of Legionella - Part 2: Direct membrane filtration method for waters with low bacterial counts (ISO 11731-2:2004); German version EN ISO 11731-2:2008
DIN 25482-5:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements by high resolution gamma spectrometry, neglecting the influence of sample treatment
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN 52241-7:1986 Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of manganese content calculated as MnO
DIN 52240-5:1994 Testing of raw materials for the production of glass; chemical analysis of limestone with a minimum content of 95% calcium carbonate; determination of total iron content calculated as iron(III)oxide
DIN 52240-7:1994 Testing of raw materials for the production of glass; chemical analysis of limestone with a minimum content of 95% calcium carbonate; determination of manganese content calculated as MnO
DIN EN ISO 2884-1:2023-09 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO/DIS 2884-1:2023); German and English version prEN ISO 2884-1:2023 / Note...
DIN 38409-43:1981 German standard methods for the analysis of water, waste water and sludge; Summary action and material characteristic parameters (group H); Determination for the chemical oxygen demand (COD); short duration method (H 43)
DIN IEC/TS 60216-7-1:2014 Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of thermal endurance index (TI) and relative thermal endurance (RTE) using analytical test methods - Calculating procedures for TI and RTE based on activa
DIN 38409-41:1980 German Standard Methods for Examination of Water, Waste Water and Sludge; Summary Action and Material Characteristic Parameters (Group H); Determination of the Chemical Oxygen Demand (COD) in the Range over 15 mg/l (H41)
DIN IEC/TS 60216-7-1:2015 Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations based on activation energy (IEC/TS 60216-7-1:2015)

International Organization for Standardization (ISO), Absolute Count Quantitative Detection

ISO/TS 19036:2006/Amd 1:2009 Microbiology of food and animal feeding stuffs - Guidelines for the estimation of measurement uncertainty for quantitative determinations - Amendment 1: Measurement uncertainty for low counts
ISO/DIS 2884-1:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
ISO 14696:2009 Reaction-to-fire tests - Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
ISO 11731-2:2004 Water quality - Detection and enumeration of Legionella - Part 2: Direct membrane filtration method for waters with low bacterial counts
ISO 3028:1974 Photography — Expendable photoflash lamps — Determination of relative spectral energy distribution for calculation of spectral distribution index
ISO 11929-1:2000 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 1: Fundamentals and application to counting measurements without the influence of sample treatment
ISO 11929-2:2000 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 2: Fundamentals and application to counting measurements with the influence of sample treatment
ISO 11929-5:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
ISO 11929-3:2000 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs — Horizontal method for detection and enumeration of Campylobacter spp. — Part 3: Semi-quantitative method

Group Standards of the People's Republic of China, Absolute Count Quantitative Detection

T/YBL 003-2018 Preparation and quantitative calculation of acetaldehyde detection sample in polyethylene terephthalate (PET) bottles

British Standards Institution (BSI), Absolute Count Quantitative Detection

BS 8496:2007 Water quality - Enumeration of micro-organisms in water samples - Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
BS EN ISO 11731-2:2004 Water quality. Detection and enumeration of Legionella. Direct membrane filtration method for waters with low bacterial counts
BS EN ISO 11731-2:2008 Water quality - Detection and enumeration of Legionella - Direct membrane filtration method for waters with low bacterial counts
BS ISO 11929-2:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements with the influence of sample treatment
BS ISO 11929-1:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements without the influence of sample treatment
BS DD CEN ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp - Semi-quantitative method
DD CEN ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter spp.. Semi-quantitative method
BS ISO 11929-3:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment

American Society for Testing and Materials (ASTM), Absolute Count Quantitative Detection

ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM C1356-07 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM C1356-07(2012) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM D6113-03 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-02 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-99 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-09 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6113-21 Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D7510-10(2016)e1 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
ASTM F50-12(2015) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

FI-SFS, Absolute Count Quantitative Detection

SFS-ISO 6888 E:1987 This standard is approved in English

Korean Agency for Technology and Standards (KATS), Absolute Count Quantitative Detection

KS A ISO 11929-2:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 2:Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 11929-2:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 2：Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 11929-3:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
KS A ISO 11929-3:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
KS A ISO 11929-2-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 2：Fundamentals and application to counting measurements with the influence of sample treatment
KS I ISO 11731-2:2010 Water quality-Detection and enumeration of Legionella-Part 2:Direct membrane filtration method for waters with low bacterial counts
KS T ISO 4180-2:2004 Complete, filled transport packages-General rules for the compilation of performance test schedules-Part 2:Quantitative data
KS A ISO 11929-1-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 1：Fundamentals and application to counting measurements without the influence of sample treatment
KS A ISO 11929-5-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 5：Fundamentals and applications to counting measurements on filters during accumulation of radioact
KS A ISO 4037-3:2003 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy－Part 3：Calibration of area and personal dosemeters and the measurement of their response as a function of ener
KS A ISO 11929-3-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 3：Fundamentals and application to counting measurements by high resolution gamma spectrometry witho
KS C IEC 61582:2012 Radiation protection instrumentation－In vivo counters－Classification, general requirements and test procedures for portable, transportable and installed equipment

European Committee for Standardization (CEN), Absolute Count Quantitative Detection

EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019)
EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019)
CEN ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method

AT-ON, Absolute Count Quantitative Detection

ONORM S 5231-1993 Radiation protection dosemeters - Individual dosemeters and portable area monitors with ionization Chambers, countertubes or scintillators for y- and X-rays - Marking of conformity

CZ-CSN, Absolute Count Quantitative Detection

CSN 40 4012-1971 Measurement of ionizing radiation and particle emission of radionuclides. Relative activity measurement with internal proporlional counters.

American National Standards Institute （ANSI), Absolute Count Quantitative Detection

ANSI/ASTM D6113:2003 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM D6113:2002 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

Association Francaise de Normalisation, Absolute Count Quantitative Detection

NF M60-200-5:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 5 : fundamentals and applications to counting measurements on filters during accumulation of radioactive materiel.
NF V08-054:2009 Microbiology of food and animal feeding stuffs - Enumeration of presumptive enterobacteria by colony count technique at 30 oC or 37 oC.

NL-NEN, Absolute Count Quantitative Detection

NEN-ISO 4180-2:1993 Complete, filled transport packages. General rules for the compilation of performance test schedules. Part 2: Quantitative data (ISO 4180-2:1980)

Standard Association of Australia （SAA）, Absolute Count Quantitative Detection

AS 5013.15:2006 Food microbiology - Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of presumptive Escherichia coli - Most probable number technique

VN-TCVN, Absolute Count Quantitative Detection

TCVN 7715-3-2013 Microbiology of food and animal feeding stuffs.Horizontal method for detection and enumeration of Campylobacter spp.Part 3: Semi-quantitative method

Danish Standards Foundation, Absolute Count Quantitative Detection

DS/CEN ISO/TS 10272-3/AC:2012 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method
DS/CEN ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method

International Telecommunication Union (ITU), Absolute Count Quantitative Detection

ITU-T X.1086-2008 Telebiometrics protection procedures Part 1: A guideline to technical and managerial countermeasures for biometric data security Study Group 17

International Electrotechnical Commission (IEC), Absolute Count Quantitative Detection

IEC 112/276/CD:2013 IEC/TS 60216-7-1, Ed. 1: Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of thermal endurance index (TI) and relative thermal endurance (RTE) using analytical test methods - Calculating procedures for T