ZH
RU
ES
Test method for high and low temperature test
Test method for high and low temperature test, Total:499 items.
In the international standard classification, Test method for high and low temperature test involves: Energy and heat transfer engineering in general, Road vehicle systems, Leather technology, Railway rolling stock, Rails and railway components, Printed circuits and boards, Photography, Testing of metals, Mechanical testing, Installations in buildings, Railway engineering in general, Road vehicles in general, Rubber and plastics products, Rubber, Refractories, Lubricants, industrial oils and related products, Environmental testing, Semiconductor devices, Products of the textile industry, Insulating materials, Thermodynamics and temperature measurements, Petroleum products in general, Ceramics, Vocabularies, Cellular materials, Fuels, Equipment for petroleum and natural gas industries, Protection against fire, Road engineering, Paint ingredients, Optics and optical measurements, Fluid storage devices, Reinforced plastics, Elements of buildings, Lamps and related equipment, Components for electrical equipment, Textile fibres, Soil quality. Pedology, Hydraulic fluids, Valves, Construction materials, Analytical chemistry, Electrical and electronic testing, Electrical engineering in general, Metalliferous minerals, Test conditions and procedures in general, Iron and steel products, Materials for aerospace construction, Pipeline components and pipelines, Fibre optic communications, Optical equipment, Coals, Insulating fluids, Powder metallurgy, Waxes, bituminous materials and other petroleum products, Electronic tubes, Nuclear energy engineering, Plastics, Electricity. Magnetism. Electrical and magnetic measurements, Environmental protection, Paints and varnishes, Non-destructive testing, Adhesives, Refrigerating technology, Microprocessor systems, Farm buildings, structures and installations, Glass, Water quality, Explosion protection, Corrosion of metals, Radiocommunications, Footwear, On-board equipment and instruments, Aerospace electric equipment and systems, Fuel cells, Inorganic chemicals, Semiconducting materials.
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test method for high and low temperature test
- GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
- GB/T 33979-2017 Test methods for proton exchange membrane fuel cell power system at subzero environment
Indonesia Standards, Test method for high and low temperature test
- SNI 09-4056-1996 Method of high and low temperatur test for motor vehicle parts
- SNI 07-6736-2002 Test methods for metallic materials elevating on high temperatures
- SNI 19-1141-1989 Temperature, Test method
- SNI 06-6992.2-2004 Sediment - Part 2: Test methods of mercury (Hg) with cold vapour by mercury analyzer
- SNI 07-1337-1989 Heat resistance steel and alloy steel at high temperature, Tensile test method
- SNI ASTM C24:2010 Standard Test Methods for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
PT-IPQ, Test method for high and low temperature test
- NP ISO 3383:1999 Rubber General directions for achieving elevated or subnormal temperaturas for test purposes
GM Daewoo, Test method for high and low temperature test
Japanese Industrial Standards Committee (JISC), Test method for high and low temperature test
- JIS K 6542:1974 Testing methods for cold resistance of leather
- JIS E 4035 AMD 1:2011 Railway rolling stock.High and low temperature test methods of parts (Amendment 1)
- JIS E 3019:1979 High and low temperature testing methods for parts of railway signaling
- JIS D 0204:1967 Method of high and low temperature test for automobile parts
- JIS S 3200-2:1997 Equipment for water supply service -- Test method of low temperature resistant
- JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
- JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
- JIS Z 2279:1992 Method of high temperature low cycle fatigue testing for metallic materials
- JIS R 1606:1995 Testing methods for tensile strength of fine ceramics at room and elevated temperature
- JIS Z 8706:1980 Methods of temperature measurement by optical pyrometers
- JIS R 1605:1995 Testing methods for elastic modulus of fine ceramics at elevated temperature
- JIS R 1623:1995 Testing method for vickers hardness of fine ceramics at elevated temperatures
- JIS R 1658:2003 Testing methods for bending fatigue of fine ceramics at elevated temperatures
- JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
- JIS R 1658:2008 Testing method for bending fatigue of fine ceramics at elevated temperature
- JIS R 1654:2003 Testing method for wear resistance of fine ceramics by ball-on-disk method at elevated temperatures
- JIS K 6330-4:2003 Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests
- JIS K 7216:1980 Testing method for brittleness temperature of plastics
- JIS K 7121:1987 Testing methods for transition temperatures of plastics
- JIS R 1604:2008 Testing method for flexural strength (modulus of rupture) of fine ceramics at elevated temperature
- JIS K 6261:1997 Low temperature testing methods for rubber, vulcanized or thermoplastic
- JIS L 0878:1995 Test methods for colour fastness to high temperature steaming
GM Global, Test method for high and low temperature test
- GMW 14692-2012 Methods of Test for Sound Deadener Pads; Test for Low Temperature Resistance Issue 2; English
Group Standards of the People's Republic of China, Test method for high and low temperature test
- T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
- T/WJDGC 0003-2021 Thermostat test method
- T/AQSPMK 0003-2023 Test method of artificial leather and synthetic leather — Determination of hydrolysis resistance at high temperature
- T/AQSPMK 003-2023 Test method of artificial leather and synthetic leather—Determination of hydrolysis resistance at high temperature
- T/CASME 787-2023 High and low temperature environment simulation device for automotive engine testing
- T/JAR 005/2-2022 Testing method of energy efficiency for temperature shock test chamber
- T/JAR 005/1-2022 Testing method of energy efficiency for temperature shock test chamber
- T/CAB 0238-2023 Performance requirements and test methods under high temperature condition for notebooks
- T/CCSA 355-2022 User Experience of Smart Terminal—Technical requirements and test methods for performance at low temperature conditions
- T/LZBX 010-2019 Cryogenic Environment (Polar Working Conditions) Quantification Comparison Test Method of Grease Filling Force
- T/WHQASA 1-2021 Test method for high and low temperature matching dimensions of automobile composite outer cover
PL-PKN, Test method for high and low temperature test
- PN C04237-05-1991 Rubber test methods at Iow temperatur? Determination of stiffening (Gehman test)
- PN E04160-69-1988 Electric cables Test methods Methods of heating cables for electrical tests in elevated temperatures
- PN C05011 ArkusZ06-1972 Test methods of conveyer belts Determination of the resistance to Iow temperatures
- PN C89085-21-1988 Epoxy resins Methods of testing Determination of the peak temperatur?
- PN C89085-11-1987 Epoxy resins Methods of testing Determination of durability in elevated temperatur?
- PN C89286-05-1989 Polyethylene Iow density Methods of testing
- PN E04160-46-1987 Electric cables Methods of testing Test of resistance to Iow temperature of rubber of thermoplastic insulation of sheath
- PN F06100-05-1988 Furniture Testing methods for the properties of lacquered and decorative laminated surfaces Determination of high temperature resistance
- PN M53802-1960 Thermometets for Te??lng Flash - Point by th? Marcus*on Me?hod
- PN H04372-1974 Impact test for metals at elevated temperatures
- PN H04060-1992 Iron ores. Low-temperature disintegration test. Method using cold tumbling after static reduction
- PN C89082-09-1986 Nienasycone ?ywice poliestrowe Metody badań Oznaczanie trwa?o?ci w podwy?szonej temperaturze
- PN C89055-1986 Plastics sheeting Test metods of the resistance to Iow temperatur?
- PN M53801-1960 Thermomefers for Testing Flash-Poin? by the Abal- Pen$ky Me?hod
Professional Standard - Electron, Test method for high and low temperature test
- SJ 2858-1988 Method for measurement of thermoelectric refrigeration modules properties--Test method for temperature difference and maximum cold side temperature
- SJ/T 31129-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature test equipment
- SJ/T 11040-1996 Test method for viscosity of electronic glass at high temperature
- SJ 3232.1-1989 Test method for softening temperature of low-melting welding glass powder
- SJ 2857.3-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermoelectric electromotance
- SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
- SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
- SJ 20551-1995 Test methods for high ferequency interference field tester
- SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes
- SJ 425-1973 Methods of measurement for power gain of low noise travelling wave tubes
- SJ 428-1973 Methods of measurement for dynamic ranges of low noise travelling wave tubes
IPC - Association Connecting Electronics Industries, Test method for high and low temperature test
Professional Standard - Machinery, Test method for high and low temperature test
British Standards Institution (BSI), Test method for high and low temperature test
- BS EN ISO 6892-2:2018 Metallic materials. Tensile testing - Method of test at elevated temperature
- BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures
- BS EN 60068-2-13:1999 Environmental testing. Test methods. Tests. Test M. Low air pressure
- BS 3424-8:1983 Testing coated fabrics - Methods 10A, 10B and 10C - Methods for determination of low temperature performance
- 22/30423707 DC BS ISO 5119. Low Temperature Sealing Capability of Elastomeric Seals. Test Methods
- BS 903-A13:1990 Physical testing of rubber - Method for determination of stiffness at low temperature (Gehman test)
- BS EN 60068-2-40:2000 Environmental testing. Test methods. Test Z/AM. Combined cold/low air pressure tests
- BS EN 60068-2-41:2000 Environmental testing. Test methods. Tests. Test Z/BM: Combined dry heat/low air pressure tests
- BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
- BS EN ISO 3452-6:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
- BS EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C
- BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
- BS EN 60749-6:2017 Semiconductor devices. Mechanical and climatic test methods - Storage at high temperature
- BS ISO 2921:2019 Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
- BS EN 993-7:2000 Methods of test for dense shaped refractory products. Determination of modulus of rupture at elevated temperatures
- BS EN 12697-46:2020 Tracked Changes. Bituminous mixtures. Test methods. Low temperature cracking and properties by uniaxial tension tests
- BS EN 60695-2-13:2010+A1:2014 Fire hazard testing - Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
- BS EN ISO 6892-3:2015 Metallic materials. Tensile testing. Method of test at low temperature
- BS EN ISO 17703:2018 Footwear. Test methods for uppers. High temperature behaviour
- BS ISO 2921:2011 Rubber, vulcanized. Determination of low-temperature retraction (TR test)
RO-ASRO, Test method for high and low temperature test
- STAS 11388/8-1990 Cables and wires TEST METHODS Low temperature test
- STAS 6669/2-1986 HIGH-VOLTAGE TESTS Test methods
- STAS 8894/2-1981 Testing of metals STEEL CREEP STRESS RUPTURE TESTING AT ELEVATED TEMPERATURES Data processing methods
- STAS 6834-1975 Tests of metals TENSILE TEST AT LOW TEMPERATURES
- STAS SR EN 60811-3-1-1995 Insulating and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 1: Pressure test at high temperature - Tests for resistance to cracking
Korean Agency for Technology and Standards (KATS), Test method for high and low temperature test
- KS R 0016-1971 Method of high and low temperature test for automobile parts
- KS B 0800-2001 Test methods for Vickers hardness at elevated temperatures
- KS R 9191-1996(2016) High and low temperature testing methods for parts of railway signaling
- KS R 0016-2015 Method of high and low temperature test for automobile parts
- KS B 0800-2001(2016) Test methods for Vickers hardness at elevated temperatures
- KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
- KS R 0016-1971(2010) Method of high and low temperature test for automobile parts
- KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
- KS L 1598-1994 Testing methods for elastic modulus of high performance ceramics at elevated temperature
- KS R 9213-2007(2017) Railway rolling stock－High and low temperature test methods of parts
- KS M 2414-2011(2016) Standard test method for sulfur in petroleum products (high-temperature method)
- KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
- KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
- KS B 2821-2007 Method for performance testing of low temperature valves
- KS B 2821-2007(2017) Method for performance testing of low temperature valves
- KS K 0766-2022 Test method for low temperature effect on coated cloth
- KS C IEC 60345-2002(2017) Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- KS A 0513-2016(2021) Methods of temperature measurement by optical pyrometers
- KS M 2450-2007(2022) Test method for low－temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
- KS M 1914-2002(2007) Phthalic anhydride for industrial use－Methods of test－Determination of impurities oxidizable in the cold by potassium permanganate－Iodometric method
- KS B 0800-1995 Test methods for Vickers hardness at elevated temperatures
- KS B 0800-2001(2021) Test methods for Vickers hardness at elevated temperatures
- KS C IEC 60811-506-2015(2020) Electric and optical fibre cables — Test methods for non-metallic materials — Part 506: Mechanical tests — Impact test at low temperature for insulations and sheaths
- KS D 0412-2021 Test methods for corrosion in high pressure or high pressure and high temperature environment
- KS C IEC 61180:2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
- KS C IEC 61180-2-2006(2016) High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
- KS C 2139-2002 Standards of testing method for Curie temperature of magnetic materials
- KS M ISO 17703:2004 Footwear－Test methods for uppers－High temperature behaviour
- KS D 0296-2009 Standard practice for determining area specific resistance of oxide scale formed on stainless steel plates
- KS M 1032-2017 Testing method for refractive index of high purity hydrocarbons
- KS C IEC 60811-508:2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 508: Mechanical tests — Pressure test at high temperature for insulation and sheaths
- KS D 0412-2008 Test methods for corrosion in high pressure or high pressure and high temperature environment
- KS I 3202-2007(2017) Testing methods for total organic carbon in highly purified water
TR-TSE, Test method for high and low temperature test
- TS 3047-1978 METHOD OF TEST FOR TEMPERATURE LIMIT OF BRITTLENESS FOR VULCANIZED RUBBERS
Professional Standard - Aerospace, Test method for high and low temperature test
- QJ 1402-1988 Test method for low temperature thermal conductivity of metals
- QJ 2506-1993 High temperature Young's modulus test method
- QJ 20027-2011 Test method for thermal conductivity of thermal conductive grease at low temperature
- QJ 20052-2011 Cryogenic test method for high pressure helium valve
- QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
- QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
- QJ 1522-1988 Test method for low temperature linear thermal expansion coefficient of rigid solid
- QJ 1114-1987 Low-temperature hemispherical total emissivity test method for thermal control coatings
- QJ 3061-1998 Hydrogen-oxygen rocket engine low temperature and high speed bearing test method
- QJ 2715-1995 Ultra-low frequency signal test method
- QJ 2941-1997 Medium and low frequency phase test method
- QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°
- QJ 2699-1995 Low frequency magnetic field susceptibility test method
- QJ 3167-2003 Test method and safety monitoring requirements for common-bottom vacuum performance of low-temperature storage tanks of launch vehicles
RU-GOST R, Test method for high and low temperature test
- GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
- GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
- GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
- GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
- GOST R IEC 811-1-4-1994 General test methods for insulating and sheathing materials of electric cables. Tests at low temperature
- GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
- GOST 25.601-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
- GOST 16126-1991 Coal. Determination of caking power. Gray-King method
- GOST R 55033-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of flexibility at low temperature
- GOST R ISO 17703-2017 Footwear. Test methods for uppers. High temperature behaviour
American Society for Testing and Materials (ASTM), Test method for high and low temperature test
- ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D3232-88 Test Method for Measurement of Consistency of Lubricating Greases at High Temperatures
- ASTM E639-78(1996)e1 Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
- ASTM E639-78(2002) Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
- ASTM D1552-90e1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
- ASTM D1552-95 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
- ASTM D1552-83 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
- ASTM D1552-16 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
- ASTM D1552-15 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
- ASTM D3769-96(2000) Standard Test Method for Microcellular Urethanes--High Temperature Sag
- ASTM D3769-96 Standard Test Method for Microcellular Urethanes--High Temperature Sag
- ASTM D3769-20 Standard Test Method for Microcellular Urethanes—High-Temperature Sag
- ASTM D6082-23 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D4539-22 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D2354-10(2023) Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
- ASTM D2354-10(2018) Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
- ASTM D4539-98 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D453-94(2000)e1 Standard test method for filterability of diesel fuel by cryogenic flow test
- ASTM C1795-17 Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
- ASTM D6351-99 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM D6351-99(2005) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM C765-97 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
- ASTM C765-97(2007) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
- ASTM D4539-03e1 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-03 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-02 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-09 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4539-10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4451-85(1996) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
- ASTM D4451-02 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
- ASTM D4451-02(2021) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
- ASTM D4451-22 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
- ASTM D3769-05 Standard Test Method for Microcellular Urethanes--High Temperature Sag
- ASTM D3769-15 Standard Test Method for Microcellular Urethanes&x2014;High-Temperature Sag
- ASTM D6351-10(2016) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM D7403-19 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
- ASTM E644-98 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-08 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-02 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM D7110-05a Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D1053-92a(1997) Standard Test Methods for Rubber Property8212;Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
- ASTM D3793-06 Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement
- ASTM D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM D2983-09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
- ASTM D2983-15 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
- ASTM D4451-02(2014) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
- ASTM D6335-03b Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
- ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
- ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM D2983-04a Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
- ASTM D2983-04 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
- ASTM D1552-08 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
- ASTM D6351-10 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
- ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
- ASTM D3723-84(1999) Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM D3723-05e1 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM D3723-22 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM D3723-05(2017) Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM D3723-05(2011) Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM D7110-14 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D7110-15 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM F495-99a(2004) Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
- ASTM G142-98(2004) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM G142-98 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM D4129-05(2020) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
- ASTM E1491-97(2002) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM E1491-97 Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM E644-06 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-04 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-09 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM C16-81(2001) Standard Test Method for Load Testing Refractory Brick at High Temperatures
- ASTM D7403-09 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
- ASTM D7150-05 Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress at Low Temperature
- ASTM D4832-95e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
- ASTM D4832-16e1 Standard test method for preparation and testing of controlled low strength material (CLSM) test cylinders
- ASTM D3723-05 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
- ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
- ASTM D1525-87 Standard Test Method for Vicat Softening Temperature of Plastics
- ASTM D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics
- ASTM D4832-02 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
- ASTM D7097-05 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
- ASTM E21-92(1998)e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-92(1998) Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM D5882-00 Standard Test Method for Low Strain Integrity Testing of Piles
- ASTM C1424-99 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperatures
- ASTM D4402-02 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
- ASTM D4402/D4402M-12 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
- ASTM D4832/D4832M-23 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens
- ASTM D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-00 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-96 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-12 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM D4741-13 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- ASTM E21-17e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM C16-81(1996)e1 Standard Test Method for Load Testing Refractory Brick at High Temperatures
- ASTM E21-17 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-03 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-03a Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
Professional Standard - Aviation Industry, Test method for high and low temperature test
- Q/HBm 109-1994 High temperature and low temperature test methods for auto parts
SG-SPRING SG, Test method for high and low temperature test
- SS 11 Pt.17-1986 Methods Of Sampling And Test For Oils And Fats Part 17 : Cold Test
VN-TCVN, Test method for high and low temperature test
- TCVN 3939-1984 Metals.Method for testing the impact strength at low temperature
- TCVN 6530-1-1999 Refractories.Methods of test.Part 1: Determination of cold compressive strength
- TCVN 6530-10-2007 Refractories.Method of test.Part 10: Determination of modulus of rupture at elevated temperatures
Standard Association of Australia （SAA）, Test method for high and low temperature test
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Test method for high and low temperature test
- GJB 6401-2008 Test method for resistivity of coating film at high temperature
Military Standard of the People's Republic of China-General Armament Department, Test method for high and low temperature test
- GJB 8806-2015 Test method for high temperature resistivity of paint film
- GJB 987.4-1991 Weather balloon test method for determination of low temperature elongation properties
- GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test
- GJB 328-1987 Test method for low-temperature steady-state thermal conductivity of thermal insulation materials
- GJB 983.4-1993 Test methods for military rubber films - Determination of low-temperature elasticity
- GJB 6612-2008 Test method for aerodynamic force measurements in hypersonic low density wind tunnel
- GJB 10252-2021 Test method for high-temperature steady-state thermal conductivity of thermal insulation materials
- GJB 737.2-1989 Test methods for pyrotechnics agents High temperature and high humidity stability determination Microcaloric thermal method
- GJB 10247.2-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 2: Peel strength
- GJB 10247.3-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 3: Tear-off strength
- GJB 383.2A-1997 Telemetry system and sub-system test methods Telemetry high-frequency preamplifier test methods
- GJB 383.2-1987 Telemetry system and sub-system test methods Telemetry high-frequency preamplifier test methods
Professional Standard - Aviation, Test method for high and low temperature test
- HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
- HB 5237-1983 Determination of low temperature properties of vulcanized rubber - Test method for retraction temperature (TR test)
- HB 5258-1983 Test method for determination of oxidation resistance of steel and superalloy
- HB 5258-2000 Test method for determination of oxidation resistance of steel and superalloy
Professional Standard - Military and Civilian Products, Test method for high and low temperature test
- WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments
工业和信息化部, Test method for high and low temperature test
- WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
FI-SFS, Test method for high and low temperature test
Association Francaise de Normalisation, Test method for high and low temperature test
- NF EN ISO 17703:2018 Chaussures - Méthodes d'essai des tiges - Comportement aux températures élevées
- NF EN 3102:2014 Série aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse température
- NF A03-001-2:2011 Metallic materials - Tensile testing - Part 2 : method of test at elevated temperature.
- NF C26-218:1972 Methods of testing insulating materials. Method of test for electrial resistance and resistivity of insulating materials at elevated temperatures.
- NF ISO 2921:2020 Caoutchouc vulcanisé - Détermination des caractéristiques à basse température - Méthode température-retrait (essai TR)
- NF L17-099*NF EN 3102:2014 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
- NF EN 60068-2-39:2016 Essais d'environnement - Partie 2-39 : essais - Essais et lignes directrices : essais combinés de température ou de température et d'humidité à basse pression atmosphérique
- NF C20-405:1985 Test Methods Basic Environmental Testing Procedures
Guidance for Test N:Change of Temperature
- NF EN 915:2009 Matériel de gymnastique - Barres asymétriques - Exigences et méthodes d'essai y compris de sécurité
- NF C41-106*NF EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
- NF G62-114:2002 Footwear - Test methods for uppers - High temperature behaviour.
- NF G62-130*NF EN ISO 17703:2018 Footwear - Test methods for uppers - High temperature behaviour
- NF EN 3745-405:2013 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 405 : essai de courbure aux températures basse/haute
- NF EN 3841-511:2005 Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 511 : essai combiné : température, altitude et vibrations
ES-UNE, Test method for high and low temperature test
- UNE-EN ISO 17703:2019 Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
- UNE-EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test (Endorsed by AENOR in August of 2012.)
- UNE-EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
- UNE-EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility (Endorsed by AENOR in April of 2013.)
- UNE-EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
- UNE-EN ISO 13257:2020 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
- UNE-EN 3841-511:2004 Aerospace series - Circuit breakers - Test methods - Part 511: Combined test: temperature, altitude and vibration (Endorsed by AENOR in April of 2005.)
German Institute for Standardization, Test method for high and low temperature test
- DIN EN ISO 17703:2018-12 Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003); German version EN ISO 17703:2018
- DIN EN ISO 17703:2018 Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
- DIN EN 3745-405:2012-10 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/high temperature bend test; German and English version EN 3745-405:2012
- DIN IEC 60345:1996 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures (IEC 60345:1971); German version HD 438 S1:1984
- DIN EN ISO 13257:2019-04 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018); German version EN ISO 13257:2018
IN-BIS, Test method for high and low temperature test
AIA/NAS - Aerospace Industries Association of America Inc., Test method for high and low temperature test
- NASM1312-28-1997 Fastener Test Methods; Method 28@ Elevated Temperature Double Shear
- NASM1312-18-1997 Fastener Test Methods; Method 18 Elevated Temperature Tensile Strength
- NASM1312-28-2012 FASTENER TEST METHODS METHOD 28 ELEVATED TEMPERATURE DOUBLE SHEAR (Rev 1)
- NASM1312-18-2012 FASTENER TEST METHODS METHOD 18 ELEVATED TEMPERATURE@ TENSILE STRENGTH (Rev 1)
Aerospace Industries Association/ANSI Aerospace Standards, Test method for high and low temperature test
Professional Standard - Ocean, Test method for high and low temperature test
- HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
- HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test
AENOR, Test method for high and low temperature test
- UNE 51215:1987 STANDARD TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS. (HIGH TEMPERATURE METHOD)
- UNE 28581:1986 AEROSPACE. FASTENERS. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERTURE LESS THAN OR EQUAL TO 425oC. TEST METHODS.
- UNE 22330:1992 COAL DUST EXPLOSIBILITY. TEST METHOD FOR DETERMINING THE MINIMUM IGNITION TEMPERATURE IN A LAYER.
- UNE 21330:1975 METHOD OF TEST FOR ELECTRICAL RESISTANCE AND RESISTIVITY OF INSULATING MATERIALS AT ELEVATED TEMPERATURES.
- UNE 112016:2011 High temperature corrosion. Test for the determination of the Pilling-Bedworth ratio.
- UNE-EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
- UNE-EN 61180-2:1996 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT. PART 2: TEST EQUIPMENT.
- UNE-EN 13519:2002 Footwear - Test methods for uppers - High temperature behaviour.
- UNE-ISO 2921:2017 Rubber, vulcanized. Determination of low temperature retraction (TR test)
Professional Standard - Railway, Test method for high and low temperature test
- TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
- TB/T 2953-1999 High temperature and low temperature test methods for railway ground signal products
KR-KS, Test method for high and low temperature test
- KS R 9213-2007(2017)(英文版) Railway rolling stock－High and low temperature test methods of parts
- KS C IEC 61180-2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
- KS C IEC 60811-508-2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 508: Mechanical tests — Pressure test at high temperature for insulation and sheaths
国家市场监督管理总局、中国国家标准化管理委员会, Test method for high and low temperature test
- GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
- GB/T 40286-2021 The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Test method for high and low temperature test
- PREN 3745-405-2010 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 405: Low/high temperature bend test (Edition P 1)
- PREN 3102-1996 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility
- PREN 3102-2000 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility (Edition P 1)
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Test method for high and low temperature test
Canadian General Standards Board （CGSB), Test method for high and low temperature test
Aerospace, Security and Defence Industries Association of Europe (ASD), Test method for high and low temperature test
- ASD-STAN PREN 3745-405-2010 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 405: Low/high temperature bend test (Edition P 1)
- ASD-STAN PREN 3102-2000 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility (Edition P 1)
Shaanxi Provincial Standard of the People's Republic of China, Test method for high and low temperature test
- DB61/T 1276-2019 Test method for acid dew point of boiler low temperature corrosion flue gas
AT-ON, Test method for high and low temperature test
- ONORM EN 10002-5-1992 Metallic materials - Tensile testing - Method of testing at elevated temperature
- ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures
ES-AENOR, Test method for high and low temperature test
TIA - Telecommunications Industry Association, Test method for high and low temperature test
Aerospace Industries Association, Test method for high and low temperature test
Professional Standard - Petroleum, Test method for high and low temperature test
- SY/T 7074-2016 Calibration method of HTHP drilling fluid filter press
- SY 7074-2016 Calibration method of high temperature and high pressure fluid loss tester for drilling fluid
European Committee for Standardization (CEN), Test method for high and low temperature test
- EN 14187-7:2003 Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame
- EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
- EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature
- EN 14187-1:2003 Cold applied joint sealants - Part 1:Test method for the determination of rate of cure
- EN 14187-3:2003 Cold applied joint sealants Part 3: Test method for the determination of self-levelling properties
- EN 14187-5:2003 Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis
- EN 14187-1:2017 Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test method for high and low temperature test
- GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
- GB/T 18443.3-2001 Testing method of cryo-insulation pressure vessels leakage measurement
- GB/T 18443.1-2001 Testing method of cryo-insulation pressure vessels volume measurement
- GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
- GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
- GB/T 23460.1-2009 Test methods of ceramic glazes.Part 1:Determination of fluidity behaviour.Fusion flow test
- GB/T 18443.2-2001 Testing method of cryo-insulation pressure vessels vacuum measurement
- GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
- GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
- GB/T 1682-2014 Rubber,vulcanized.Determination of low-temperature brittleness.Single test piece method
- GB/T 15256-1994 Rubber, vulcanized--Determination of low-temperature brittleness(multiple test piece method)
- GB/T 1682-1994 Rubber, vulcanized--Determination of low-temperature brittleness (single test piece method)
- GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
- GB/T 480-2000 Test for carbonization of coal in aluminum retort
- GB/T 1341-2001 Gray--King assay for coal
- GB/T 480-2010 Test method for aluminum retort low temperature carbonization of coal
- GB/T 1341-2007 Gray-King assay of coal
- GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
- GB/T 7758-1987 Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)
- GB/T 7758-2002 Rubber,vulcanized--Determination of low-temperature characteristics--Temperature-retraction procedure (TR test)
- GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
- GB/T 3789.29-1991 Measurements of the electrical properties of transmitting tubes--Method of measuring the non-linearity in the luminance of the lower frequency
- GB/T 10261-1988 Test procedures for stabilized d.c high/low voltage power for nuclear instruments
- GB/T 12085.2-2022 Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
- GB/T 13477.7-2002 Test method for building sealants Part 7: Determination of low-temperature flexibility
- GB/T 18443.4-2001 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement
- GB/T 18443.5-2001 Testing method of cryo-insulation pressure vessels static vaporation rate measurement
- GB/T 16864-1997 Method for testing cryogenic transmissivity of crystals
- GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
- GB/T 12085.16-1995 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration, in dry heat or cold
- GB/T 19560-2008 Experimental method of high-pressure isothermal adsorption to coal
- GB/T 32368-2015 Measurement of resistance to elevated temperature and humidity for adhesive tapes
- GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
- GB/T 7962.22-1987 Colourless optical glass test methods--Temperature coefficient of refractive index
- GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
- GB/T 12085.10-2010 Optics and optical instruments.Environmental test methods.Part 10:Combined sinusoidal vibration and dry heat or cold
- GB/T 12085.21-2011 Optics and optical instruments.Enviromental test methods.Part 21: Combined low pressure and ambient temperature or dry heat
- GB/T 13434-1992 Test method for H.P.S.Lamps
- GB/T 24581-2009 Test method for low temperature FT-IR analysis of single crystal silicon for Ⅲ-Ⅴ impurities
未注明发布机构, Test method for high and low temperature test
- DIN EN ISO 15027-3:2002 Protective clothing against hypothermia in water – Part 3: Test methods
- BS 3424-8:1982 Testing coated fabrics Part 8 . Methods 10A and 10C.Methods for determination of low temperature performance) * S * BITE)
Guangdong Provincial Standard of the People's Republic of China, Test method for high and low temperature test
- DB44/T 1894-2016 Test method for high and low temperature weather resistance of LED street lamps and tunnel lamps
SE-SIS, Test method for high and low temperature test
CZ-CSN, Test method for high and low temperature test
- CSN 65 6327-1961 Testing of greases at low emperatures by means of ntifriction bearing
- CSN 42 0351-1988 Testing of metals. Creep testing at elevated temperatures
- CSN IEC 355:1994 Electrotechnical and electronic products.An appraisal of the problems of accelerated testing for atmospheric corrosion
- CSN IEC 345:1992 Methods of test electrical resistance and resistivity of insultating materials at elevated temperatures
- CSN 26 9305-1983 Plastic crates. Testing method of stability to the form and dimension through the action of higher temperature
- CSN 34 5642-1982 Electrical apparatus and eguipment. Measuring methods in highvoltage tests
- CSN 72 7303 Z2-1996
Jilin Provincial Standard of the People's Republic of China, Test method for high and low temperature test
NZ-SNZ, Test method for high and low temperature test
- AS/NZS 1635.10.1:1995 Methods of Test for Pressure-Sensitive Adhesive Tape Method 10.1: Resistance to Shear Loading at Elevated Temperatures
WRC - Welding Research Council, Test method for high and low temperature test
- BULLETIN 391-1994 ELEVATED TEMPERATURE TESTING OF GASKETS FOR BOLTED FLANGED CONNECTIONS
American Welding Society (AWS), Test method for high and low temperature test
- WRC 391:1994 Elevated Temperature Testing of Gaskets for Bolted Flanged Connections
Electronic Components, Assemblies and Materials Association, Test method for high and low temperature test
- ECA EIA-448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature
GOSTR, Test method for high and low temperature test
- GOST IEC 60811-3-1-2011 Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking
- GOST R IEC 62984-2-2020 High-temperature secondary batteries. Part 2. Safety requirements and tests methods
BE-NBN, Test method for high and low temperature test
- NBN-ISO 1432:1990 Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)
- NBN T 31-031-1985 Rubber, vulcanized - Determinationof low temperature characteristics- Temperature-re-traction procedure(TR test)
Danish Standards Foundation, Test method for high and low temperature test
- DS/EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
- DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
- DS/EN 13519:2002 Footwear - Test method for uppers - High temperature behaviour
- DS/EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
American National Standards Institute （ANSI), Test method for high and low temperature test
BR-ABNT, Test method for high and low temperature test
工业和信息化部/国家能源局, Test method for high and low temperature test
- JB/T 13559-2018 Test method for high temperature tensile properties of bag dust collector filter materials
ECIA - Electronic Components Industry Association, Test method for high and low temperature test
- EIA-364-105B-2015 TP-105B Altitude – Low Temperature Test Procedure for Electrical Connectors and Sockets
- EIA/ECA-364-105A-2008 TP-105A ALTITUDE – LOW TEMPERATURE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS
- EIA-448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature
YU-JUS, Test method for high and low temperature test
- JUS N.C0.056-1980 Testing offlacible cords and cables. Elasticity at low temperatures
- JUS B.D8.321-1991 Refractories. Methods of physical testing. Determination ofmodulus ofrupture at elevated temperatu-res
Society of Automotive Engineers (SAE), Test method for high and low temperature test
SAE - SAE International, Test method for high and low temperature test
International Organization for Standardization (ISO), Test method for high and low temperature test
- ISO 2921:2005 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- ISO 17703:2003 Footwear - Test methods for uppers - High temperature behaviour
- ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
AR-IRAM, Test method for high and low temperature test
ETSI - European Telecommunications Standards Institute, Test method for high and low temperature test
- ETR 049-1992 Advanced Testing Methods (ATM); State of Research in the Area of Formal Test Specification Methods
JP-JEC, Test method for high and low temperature test
Alliance of Telecommunications Industry Solutions （ATIS), Test method for high and low temperature test
ATIS - Alliance for Telecommunications Industry Solutions, Test method for high and low temperature test
- 0500001-2011 High Level Requirements for Accuracy Testing Methodologies
- 0500001-2004 High Level Requirements for Accuracy Testing Methodologies
Professional Standard - Light Industry, Test method for high and low temperature test
- QB/T 3726-1999 Inner containers of the vacuum flask.Heat loss.Test method
Lithuanian Standards Office , Test method for high and low temperature test
- LST HD 438 S1-2002 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures (IEC 60345:1971)
- LST 1428.5-1996 Concrete. Testing methods. Determination of temperature of fresh concrete
- LST EN 13519-2002 Footwear - Test methods for uppers - High temperature behaviour
- LST EN 3745-405-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
Hebei Provincial Standard of the People's Republic of China, Test method for high and low temperature test
中华全国供销合作总社, Test method for high and low temperature test
- GH/T 1099-2014 Test method for temperature and humidity of seed cotton stacks
农业农村部, Test method for high and low temperature test
- NY/T 3894-2021 Test methods for energy consumption of multi-span greenhouses
Malaysia Standards, Test method for high and low temperature test
Illuminating Engineering Society of North America, Test method for high and low temperature test
SA-SASO, Test method for high and low temperature test
- SASO SSA 256-1981 METHODS OF TEST FOR GASOLINE - DETERMINATION OF LOW LEAD CONTENT IN GASOLINE
European Telecommunications Standards Institute (ETSI), Test method for high and low temperature test
- ETSI ETR 049-1992 Advanced Testing Methods (ATM); State of Research in the Area of Formal Test Specification Methods
International Electrotechnical Commission (IEC), Test method for high and low temperature test
- IEC 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
European Committee for Electrotechnical Standardization（CENELEC）, Test method for high and low temperature test
- EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
CEN - European Committee for Standardization, Test method for high and low temperature test
- EN 14187-5:2019 Cold applied joint sealants - Test methods - Part 5: Determination of the resistance to hydrolysis
- EN ISO 17703:2018 Footwear - Test methods for uppers - High temperature behaviour
HU-MSZT, Test method for high and low temperature test
AASHTO - American Association of State Highway and Transportation Officials, Test method for high and low temperature test
- T298-1993 Standard Method of Test for High-Strain Dynamic Testing of Piles (Eighteenth Edition)