ZH
RU
ES

capillary active compound

capillary active compound, Total:255 items.

In the international standard classification, capillary active compound involves: Medical equipment, Plastics, Products of the chemical industry, Organic chemicals, Insulating materials, Microbiology, Fuels, Air quality, Analytical chemistry, Paints and varnishes, Chipless working equipment, Raw materials for rubber and plastics, Water quality, Natural gas, Thermodynamics and temperature measurements, Protection against dangerous goods, Laboratory medicine, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Animal feeding stuffs, Wastes, Soil quality. Pedology, Sterilization and disinfection, Fuel cells.

General Motors do Brasil, capillary active compound

GMSA EMS 9309554-2011 Adhesive/sealant compound, thixotropic - capillary action Composto adesivo/selador, tixotr贸pico - a莽茫o capilar Do Not use on New Programs; No Replacement

Korean Agency for Technology and Standards (KATS), capillary active compound

KS P ISO 14602:2010 Non-N surgical implants-Implants for osteosynthesis-Particular requirements
KS M ISO 3146:2012 Plastics-Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
KS K 0195-2006 Non-ionic surface active agents-Determination of cloud point index-Volumetric method
KS C IEC 60455-3-2-2015(2020) Resin based reactive compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 2：Quartz filled epoxy resinous compounds
KS M ISO 3146-2012(2022) Plastics－Determination of melting behaviour(melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
KS M ISO 17052-2012(2022) Rubber, raw－Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography－ Thermal desorption(dynamic headspace) method
KS H ISO 17494:2021 Aromatic extracts, flavouring and perfuming compounds — Determination of ethanol content — Gas chromatographic method on packed and capillary columns
KS M ISO 17052-2012(2017) Rubber, raw－Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography－ Thermal desorption(dynamic headspace) method
KS I 3221-2007 Water quality－Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium[Semi-continuous activated sludge method(SCAS)]
KS I 3221-2007(2017) Water quality－Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium[Semi-continuous activated sludge method(SCAS)]
KS I ISO 11733-2008(2018) Water quality－Determination of the elimination and biodegradability of organic compounds in an aqueous medium－Activated sludge simulation test
KS H ISO 17494:2006 Aromatic extracts, flavouring and perfuming compounds－Determination of ethanol content－Gas chromatographic method on packed and capillary columns
KS M ISO 17052:2012 Rubber, raw－Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography－ Thermal desorption(dynamic headspace) method
KS I ISO 11733:2008 Water quality－Determination of the elimination and biodegradability of organic compounds in an aqueous medium－Activated sludge simulation test
KS I ISO 16017-2:2005 Indoor, ambient and workplace air-Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography-Part 2:Diffusive sampling
KS I ISO 16017-1-2008(2018) Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling
KS I ISO 16017-1:2008 Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling
KS I ISO 16017-2:2020 Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography —Part 2: Diffusive sampling

International Organization for Standardization (ISO), capillary active compound

ISO 14602:2010 Non-active surgical implants - Implants for osteosynthesis - Particular requirements
ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
ISO 3146:2000/cor 1:2002 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods; Technical Corrigendum 1
ISO 3146:2022 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
ISO 17052:2007 Rubber, raw - Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method
ISO 17494:2001 Aromatic extracts, flavouring and perfuming compounds - Determination of ethanol content - Gas chromatographic method on packed and capillary columns
ISO 11733:2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test
ISO 11733:1995 Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test
ISO 9887:1992 Water quality; evaluation of the aerobic biodegradability of organic compounds in an aqueous medium; semi-continuous activated sludge method (SCAS)
ISO 16017-1:2000 Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling
ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
ISO 16000-3:2022 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor and test chamber air — Active sampling method
ISO 14855:1999/Amd 1:2004 Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide; Amendment 1: Use of activated vermiculite instead of mature compost

Association Francaise de Normalisation, capillary active compound

NF S94-101*NF EN ISO 14602:2012 Non-active surgical implants - Implants for osteosynthesis - Particular requirements
NF T51-621:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods.
NF C26-163-4*NF EN 60455-3-4:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 4 : filled polyurethane compounds
NF C26-163-3*NF EN 60455-3-3:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 3 : unfilled polyurethane compounds
NF C26-163-1*NF EN 60455-3-1:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : unfilled epoxy resinous compounds.
NF C26-163-2*NF EN 60455-3-2:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : quartz filled epoxy resinous compounds
NF T51-621*NF EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
NF T75-512*NF ISO 17494:2002 Aromatic extracts, flavouring and perfuming compositions - Determination of ethanol content - Gas chromatographic method on packed and capillary columns.
NF ISO 17052:2007 Caoutchouc brut - Détermination des monomères résiduels et autres composés volatils de masse moléculaire faible par chromatographie en phase gazeuse sur colonne capillaire - Méthode par désorption thermique (espace de tête dynamique)
NF T90-314*NF EN ISO 9887:1995 Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Semi-continuous activated sludge method (scas).
NF C26-162*NF EN 60455-2:2016 Resin based reactive compounds used for electrical insulation - Part 2 : methods of test
NF T51-061-5*NF EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : thermoplastic polyester (TP) homopolymers and copolymers
NF EN ISO 1628-5:2015 Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de viscosimètres à capillaires - Partie 5 : homopolymères et copolymères des polyesters thermoplastiques (TP)
NF C26-161*NF EN 60455-1:1999 Resin based reactive compounds used for electrical insulation. Part 1 : definitions and general requirements.
NF T46-070*NF ISO 17052:2007 Rubber, raw - Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method.
NF EN ISO 9887:1995 Qualité de l'eau - Évaluation, en milieu aqueux, de la biodégradabilité aérobie des composés organiques - Méthode semi-continue par boues activées (méthode SCAS).
NF C26-163-8*NF EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 8 : resins for cable accessories
NF EN ISO 11733:2004 Qualité de l'eau - Détermination de l'élimination et de la biodégradabilité des composés organiques en milieu aqueux - Essai de simulation des boues activées
NF X30-453:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste, by using capillary gas chromatography with electron capture or mass spectrometric detection.
NF EN ISO 16017-1:2001 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 1 : échantillonnage par pompage
NF X43-341:2002 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method.
NF T90-323*NF EN ISO 11733:2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test.
NF X43-510-2*NF EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2 : diffusive sampling
NF EN ISO 16017-2:2003 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 2 : échantillonnage par diffu...
NF C26-163-8*NF EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8 : specifications for individual materials - Resins for cable accessories
NF X43-510-1*NF EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1 : pumped sampling
NF C26-163-5:1993 Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 5 : unsaturated polyester impregnating resins.

Guangdong Provincial Standard of the People's Republic of China, capillary active compound

DB44/T 784-2010 Determination of Rheological Properties of Polymer Melt by Plunger Capillary Rheometer
DB44/T 783-2010 Determination of Rheological Properties of Polymer Melt by Screw Extrusion Capillary Rheometer

British Standards Institution (BSI), capillary active compound

BS EN ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
BS EN ISO 1628-5:2015 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Thermoplastic polyester (TP) homopolymers and copolymers
BS 6829 Sec.4.2:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of polyethylene glycols and non-ionic active matter contents
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Sheet 8: Resins for cable accessories
BS EN ISO 6974-6:2002 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
BS EN ISO 6974-6:2008 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
BS EN 60455-1:1998 Resin based reactive compounds used for electrical insulation. Definitions and general requirements
BS EN ISO 11733:2004 Water quality. Determination of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test
BS EN ISO 9887:1995 Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Semi-continuous activated sludge method (SCAS)
BS EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
BS EN 13268:2001(2004) Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
BS ISO 1628-5:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Thermoplastic polyester (TP) homopolymers and copolymers
BS EN 60455-2:2015 Tracked Changes. Resin based reactive compounds used for electrical insulation. Methods of test
BS EN ISO 9509:2006 Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms
BS EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling
BS EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling
BS EN 13649:2002 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
BS EN 60455-3-5:2006 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unsaturated polyester based impregnating resins
BS EN ISO 11733:2005 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test
BS 6829 Sec.4.6:1988 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of hydroxyl value
BS EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
BS 6829 Sec.4.5:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of sulphated ash
BS 6829 Sec.4.3:1990 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups
19/30406660 DC BS EN IEC 60455-2. Resin based reactive compounds used for electrical insulation. Part 2. Methods of test
BS EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Resins for cable accessories
BS EN 60455-3-5:2002 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unsaturated polyester based impregnating resins - Sheet 5: Unsaturated polyester based impregnating resins

European Committee for Standardization (CEN), capillary active compound

EN ISO 3146:1997 Plastics - Determination of Melting Behaviour (Melting Temperature or Melting Range) of Semi-Crystalline Polymers ISO 3146: 1985
EN ISO 3146:2022 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
EN ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)
prEN ISO 3146:2021 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO/DIS 3146:2021)
EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
EN ISO 11733:1998 Water Quality - Evaluation of the Elimination and Biodegradability of Organic Compounds in an Aqueous Medium - Activated Sludge Simulation Test ISO 11733:1995
EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
EN ISO 11733:2004 Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test
EN ISO 9887:1994 Water Quality - Evaluation of the Aerobic Biodegradability of Organic Compounds in an Aqueous Medium - Semi- Continuous Activated Sludge Method (SCAS) (ISO 9887:1992)
EN 13649:2001 Stationary Source Emissions - Determination of the Mass Concentration of Individual Gaseous Organic Compounds - Activated Carbon and Solvent Desorption Method
EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
EN ISO 16017-1:2000 Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 1: Pumped Sampling ISO 16017-1:2000

Natural Gas Processor's Association (NGPA), capillary active compound

GPA STD 2199-1999 Determination of Specific Sulfur Compounds by Capillary Gas Chromatography and Sulfur Chemiluminescence Detection

American Society for Testing and Materials (ASTM), capillary active compound

ASTM D3835-16 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D2180-89(1995)e1 Standard Test Method for Active Oxygen in Bleaching Compounds
ASTM D2180-89(2003) Standard Test Method for Active Oxygen in Bleaching Compounds
ASTM D2180-17 Standard Test Method for Active Oxygen in Bleaching Compounds
ASTM D2180-89(2008) Standard Test Method for Active Oxygen in Bleaching Compounds
ASTM D5790-18 Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM F2739-16 Standard Guide for Quantifying Cell Viability within Biomaterial Scaffolds
ASTM F2739-19 Standard Guide for Quantifying Cell Viability and Related Attributes within Biomaterial Scaffolds
ASTM D6229-06(2010) Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
ASTM D5790-95(2001) Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5790-95 Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5790-95(2006) Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5790-95(2012) Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM E2783-22 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
ASTM E2783-10 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
ASTM E2783-11(2016) Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
ASTM E1625-94(2001) Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
ASTM E1625-94(2008) Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
ASTM D6345-98 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM D6345-98(2004)e1 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM E2783-11 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
ASTM D3686-08 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-95(2001)e1 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3686-20 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D3687-19 Standard Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D3686-13 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D5197-09e1 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
ASTM D3687-07 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D5197-21 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
ASTM D3686-95 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

RU-GOST R, capillary active compound

GOST 32507-2013 Motor gasolines and liquid hydrocarbon mixtures. Determination of individual and group hydrocarbon composition by capillary gas chromatography
GOST 23409.26-1978 Fluid self-hardening sand mixtures. Method for determination of surfactants solutions foaming ability and stability of foam
GOST R ISO 16000-3-2007 Indoor air. Part 3. Determination of formaldehyde and other carbonyl compounds. Active sampling method
GOST R 56375-2015 Feedstuffs, compound feeds, feed raw materials. Determination of mass fraction of chloride, sulfate, nitrate and phosphate ions using capillary electrophoresis
GOST ISO 16000-3-2016 Indoor air. Part 3. Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method
GOST 31483-2012 Premixes. Determination of vitamins: B1 (thiaminchloride), B2 (riboflavin), B3 (pantothenic acid), B5 (nicotinic acid and nicotinamide), B6 (pyridoxine), Bc (folic acid), C (ascorbic acid) content by method of capillary electrophoresis

Japanese Industrial Standards Committee (JISC), capillary active compound

JIS A 1968:2005 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Pumped sampling
JIS A 1968:2015 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Pumped sampling
JIS A 1969:2005 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1969:2015 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1967:2005 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1966:2005 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Pumped sampling
JIS A 1966:2015 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Pumped sampling
JIS A 1967:2015 Indoor air -- Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1962:2005 Indoor air -- Determination of formaldehyde and other carbonyl compounds -- Active sampling method
JIS A 1962:2015 Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air -- Active sampling method
JIS K 7367-5:2000 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers

PL-PKN, capillary active compound

PN C04550-12-1989 Water and waste water Tests for synthetic surface active agents and their biochemical oxidation Determination of biodegradability of anonic surfactans — primary test
PN Z04226-02-1992 Air purity protection -- Tests for individual toxic substances compounds (in their mixtures) in indoor air -- Determination of semi-volatile substances vapours emitted from materials and products applied in building, containing bitumens and their chlorode

Danish Standards Foundation, capillary active compound

DS/EN ISO 3146/AC:2003 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
DS/EN ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
DS/EN 60455-2:1999 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
DS/EN 60455-3-4:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds
DS/EN ISO 11733:2005 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004)
DS/EN 60455-3-3:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds
DS/EN ISO 9887:1996 Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS)
DS/EN 60455-3-1:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds
DS/EN 60455-3-2:2003 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds
DS/EN 60455-1:1999 Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements
DS/EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
DS/EN 13649:2002 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
DS/EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)
DS/EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation – Part 3-8: Specifications for individual materials – Resins for cable accessories
DS/EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
DS/EN ISO 6974-6+Corr.1:2006 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
DS/EN 60455-3-5:2006 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins

Aerospace Industries Association, capillary active compound

AIA NAS 1534-1993 (Inactive)Primer Coating: Low Volatile Organic Compound, Chemical and Solvent Resistant (Rev. 1)
AIA NAS 1545-1993 (Inactive)Coating: Low Volatile Organic Compound, for Topcoat Applications (Rev. 1)

CZ-CSN, capillary active compound

CSN 67 3095 Cast.2-1988 Paints. Resistance from external influences. Microbial resistance of disperse materials. Testing by bacteria La

BE-NBN, capillary active compound

NBN T 63-121-1980 Surface active agents - Ethylene oxide adducts - Iodometric determi-nation of oxyethylene groups

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, capillary active compound

GB/T 42162-2022 Rubber, raw—Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography—Thermal desorption (dynamic headspace) method
GB/T 21767-2008 Chemical.Test method of unscheduled DNA synthesis (UDS)test with mammalian liver cells In Vivo
GB/T 1632.5-2008 Plastics.Determination of the viscosity of polymers in dilute solution using capillary viscometers.Part 5:Thermoplastic polyester(TP) homopolymers and copolymers
GB/T 21768-2008 Chemical.Test method of DNA damage and repair/unscheduled DNA synthesis with mammalian cells in vitro

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, capillary active compound

GB/T 35893-2018 Determination of aluminium zirconium chloride hydroxide complexes, aluminium zirconium chloride hydroxide glycine complexes and aluminum chlorohydrate as antiperspirant active ingredients in cosmetics
GB/T 34682-2017 Determination of volatile organic compound(VOC) content in reactive diluent containing coatings
GB/T 35862-2018 Surface active agents—Determination of volatile organic compounds residues—Headspace gas chromatography-mass spectrometry (GC-MS)

API - American Petroleum Institute, capillary active compound

API PUBL 26-60103-1978 ESTIMATION OF THE MUTAGENICITY OF HYDROCARBON FRACTIONS UTILIZING THE BACTERIAL ASSAY PROCEDURE WITH MAMMALIAN TISSUE METABOLIC ACTIVATION - REPORT NO. 6
API PUBL 26-60100-1978 FURTHER STUDIES OF THE MUTAGENICITY OF HYDROCARBON FRACTIONS UTILIZING SOMATIC MUTATIONS IN RATS

KR-KS, capillary active compound

KS H ISO 17494-2021 Aromatic extracts, flavouring and perfuming compounds — Determination of ethanol content — Gas chromatographic method on packed and capillary columns
KS I ISO 16017-2-2020 Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography —Part 2: Diffusive sampling

AENOR, capillary active compound

UNE-EN ISO 3146:2001 PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS. (ISO 3146:2000)
UNE-EN 60455-2:2000 Resin based reactive compounds used for electrical insulation -- Part 2: Methods of test.
UNE-EN 60455-3-3:2004 Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds
UNE-EN ISO 11733:2005 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004)
UNE-EN 60455-3-1:2004 Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds
UNE-EN 60455-3-2:2004 Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds
UNE-EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
UNE-EN 60455-1:1999 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
UNE 55519:1974 SURFACE ACTIVE AGENTS. DETERMINATION OF POLYETHYLENE GLYCOL AND NON-IONIC MATTER IN ETHOXYLATED CONDENSATES. WEIBULL'S METHOD
UNE-EN ISO 9887:1995 WATER QUALITY. EVALUATION OF THE AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS IN AN AQUEOUS MEDIUM. SEMI-CONTINUOUS ACTIVATED SLUDGE METHOD (SCAS). (ISO 9887:1992).
UNE-EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Part 1: Pumped sampling. (ISO 16017-1:2000)
UNE-EN ISO 16017-2:2004 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003)
UNE 55750:1984 SURFACE ACTIVE AGENTS. CONDENSED PHOSPHATES TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. DETERMINATION OF CHLORIDE CONTENT. POTENCIOMETRIC METHOD
UNE 55820:1985 SURFACE ACTIVE AGENTS. ETHANOL TO BE USED AS RAW-MATERIAL IN DETERGENT FORMULATIONS. ESTIMATION OF HYDROCARBONS CONTENT. DISTILATION METHOD
UNE 55814:1984 SURFACE ACTIVE AGENTS. ETHANOL TO BE USED AS RAW-MATERIAL IN DETERGENT FORMULATIONS. ESTIMATION OF CONTENT OF CARBONYL COMPOUNDS PRESENT IN MODERATE AMOUNTS. TITRIMETRIC METHOD
UNE 55813:1984 SURFACE ACTIVE AGENTS. ETHANOL TO BE USED AS RAW-MATERIAL IN DETERGENT FORMULATIONS. ESTIMATION OF CONTENT OF CARBONYL COMPOUNDS PRESENT IN SMALL AMOUNTS. PHOTOMETRIC METHOD
UNE 55577:1990 SURFACE ACTIVE AGENTS. CHEMICAL PRODUCTS TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. GENERAL METHOD FOR DETERMINATION OF TRACES OF SULPHUR COMPOUNDS, AS SULPHATE, BY REDUCTION AND TITRIMETRY
UNE-EN ISO 6974-6:2006 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)

Lithuanian Standards Office , capillary active compound

LST EN ISO 3146:2002 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)
LST EN ISO 3146:2002/AC:2004 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000/Cor.1:2002)
LST EN ISO 11733:2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004)
LST EN 60455-3-4-2004 Resin based reactive compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 4: Filled polyurethane compounds (IEC 60455-3-4:2003)
LST EN 60455-2-2001 Resin based reactive compounds used for electrical insulation. Part 2. Methods of tests (IEC 60455-2:1998)
LST EN ISO 9887:2000 Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) (ISO 9887:1992)
LST EN 60455-3-3-2003 Resin based reactive compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 3: Unfilled polyurethane compounds (IEC 60455-3-3:2003)
LST EN 60455-3-1-2003 Resin based reactive compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 1: Unfilled epoxy resinous compounds (IEC 60455-3-1:2003)
LST EN 60455-3-2-2003 Resin based reactive compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 2: Quartz filled epoxy resinous compounds (IEC 60455-3-2:2003)
LST EN 60455-1-2001 Resin based reactive compounds used for electrical insulation. Part 1. Definitions and general requirements (IEC 60455-1:1998)
LST EN 13649-2002 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
LST EN ISO 16017-2:2004 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003)
LST EN ISO 16017-1:2002 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)
LST EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories (IEC 60455-3-8:2021)
LST EN ISO 6974-6:2005 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)

German Institute for Standardization, capillary active compound

DIN EN ISO 3146:2021 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO/DIS 3146:2021); German and English version prEN ISO 3146:2021
DIN EN ISO 1628-5:2015-05 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998); German version EN ISO 1628-5:2015
DIN EN ISO 11733:2004-11 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004); German version EN ISO 11733:2004
DIN EN ISO 3146:2002 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000); German version EN ISO 3146:2000
DIN EN ISO 3146 Corrigendum 1:2003 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000) Corrigendum 1 to English version of DIN EN ISO 3146:2002-06
DIN EN ISO 9887:1994-12 Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) (ISO 9887:1992); German version EN ISO 9887:1994
DIN EN ISO 11733:2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004); German version EN ISO 11733:2004
DIN EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection; English version of DIN EN 15308:2008-05
DIN EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003); German version EN ISO 16017-2:2003
DIN EN 13268:2001 Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; German version EN 13268:2001
DIN EN ISO 16017-1:2001 Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000
DIN EN ISO 16017-2:2003-09 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003); German version EN ISO 16017-2:2003
DIN EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998); German version EN ISO 1628-5:2015
DIN EN ISO 16017-1:2001-10 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000
DIN EN 60455-3-8:2014 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories (IEC 60455-3-8:2013); German version EN 60455-3-8:2013
DIN EN ISO 9887:1994 Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) (ISO 9887:1992); German version EN ISO 9887:1994
DIN EN 13649:2002 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method; German version EN 13649:2001

未注明发布机构, capillary active compound

BS EN ISO 9887:1995(2008)*BS 6068-5.14:1995 Water quality — Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium — Semi - continuous activated sludge method (SCAS)
BS EN ISO 11733:2004(2008) Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test

ES-UNE, capillary active compound

UNE-EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (Endorsed by AENOR in January of 2016.)
UNE-EN ISO 16017-1:2002 ERRATUM Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Part 1: Pumped sampling. (ISO 16017-1:2000)
UNE-EN IEC 60455-2:2023 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (Endorsed by Asociación Española de Normalización in October of 2023.)
UNE-EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories (Endorsed by AENOR in August of 2013.)

PT-IPQ, capillary active compound

NP 1374-1976

AR-IRAM, capillary active compound

IRAM 25 579-1956

International Electrotechnical Commission (IEC), capillary active compound

IEC 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
IEC 60455-3-5:2006 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins
IEC 60455-3-5:1989 Specification for solventless polymerisable resinous compounds used for electrical insulation; part 3: specifications for individual materials; sheet 5: unsaturated polyester impregnating
IEC PAS 62282-6-150:2011 Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN devision 4.3) compounds in indirect PEM fuell cells

司法部, capillary active compound

SF/T 0094-2021 Liquid chromatography-tandem mass spectrometry detection method for 7 synthetic cannabinoid new psychoactive substances in hair including 5F-MDMB-PICA

ZA-SANS, capillary active compound

SANS 12353:1999 Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity
SANS 12353:2008 Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal, mycobactericidal, sporicidal and fungicidal activity

TR-TSE, capillary active compound

TS 1849-1975 DETERMINATION OF FLOCCULATION PREVENTING POWER OF SURFACE ACTIVE AGENTS ?N THE PRESENCE OF AZOIC COMBINATIONS

Standard Association of Australia （SAA）, capillary active compound

AS 4351.7:1996 Biodegradability - Organic compounds in an aqueous medium - Determination by semi-continuous activated sludge method (SCAS)

VN-TCVN, capillary active compound

TCVN 6826-2009 Water quality.Determination of the elimination and biodegradability of organic compounds in an aqueous medium.Activated sludge simulation test

Association of German Mechanical Engineers, capillary active compound

VDI 2100 Blatt 2-2010 Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on activated charcoal - Solvent extraction
VDI 3865 Blatt 3-1998 Measurement of organic soil pollutants - Gas-chromatographic determination of volatile organic compounds in soil gas adsorption at activated carbon and desorption with organic solvents

European Committee for Electrotechnical Standardization（CENELEC）, capillary active compound

EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories

RO-ASRO, capillary active compound

STAS SR EN 60811-2-1-1995 Insulating and sheathing materials of electric cables Common test methods Part 2 : Methods specific to elastomeric compounds Section 1 : Ozone rezistance test - Hot set test - Mineral oil immersion test