Internal Laboratory Testing Procedures

Internal Laboratory Testing Procedures, Total:421 items.

In the international standard classification, Internal Laboratory Testing Procedures involves: Metrology and measurement in general, Civil engineering in general, Ground service and maintenance equipment, Coals, Ferrous metals, Construction industry, Quality, Testing of metals, Farming and forestry, Tyres, Medical sciences and health care facilities in general, Terminology (principles and coordination), Test conditions and procedures in general, Road vehicle systems, Occupational safety. Industrial hygiene, Applications of information technology, Air quality, Vocabularies, Protection of and in buildings, Meat, meat products and other animal produce, Construction materials, Laboratory medicine, Analytical chemistry, Optics and optical measurements, Road engineering, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Electricity. Magnetism. Electrical and magnetic measurements, Crude petroleum, Fuels, Software development and system documentation, Veterinary medicine, Pulps, Welding, brazing and soldering, Physics. Chemistry, General methods of tests and analysis for food products, Solar energy engineering, Acoustics and acoustic measurements, Audio, video and audiovisual engineering, Water quality, Gears, Fibre optic communications, Fluid storage devices, Domestic, commercial and industrial heating appliances, Construction technology, Electrical and electronic testing, Buildings, Hydraulic energy engineering, Vibrations, shock and vibration measurements, Construction of railways, Structures of buildings, Valves, Industrial automation systems, Electromechanical components for electronic and telecommunications equipment, Refractories, Non-destructive testing.

Group Standards of the People's Republic of China, Internal Laboratory Testing Procedures

T/LZZLXH 063-2021 Internal Calibration Specifications for Inspection and Testing Laboratories
T/CECS 1283-2023 Building materials laboratory smart testing technical regulations
T/GDCAA 008-2023 Grade Evaluation Specification for Internal Testing Laboratory of Enterprise（Electrical,Mechanical）
T/SCETIA 1001-2021 Specification for inter-laboratory comparison of construction engineering testing
T/JLFX 002-2022 Technical Teregulation for Laboratory detection of Bursa phelenchus xylophilus (Steine rand Buhrer) Nickle
T/SDAS 589-2023 Technical regulations for the construction of food inspection and testing laboratory information management system
T/SDAS 590-2023 Technical regulations for the construction of information management system for drug inspection and testing laboratories
T/LZZLXH 033-2020 Guide for whole process records management of laboratory product testing
T/CAAPP 003-2022 Basic specifications for testing and inspection laboratories for slaughtering enterprises Part 1: Livestock
T/CAAPP 00015-2022 Basic Specifications for Testing and Inspection Laboratories of Slaughtering Enterprises Part 1: Livestock
T/CSTM 00277.2-2022 Evaluation of stability for analytical instruments Part 2: Evaluation based on the precision of intra-laboratory determination results

Yunnan Provincial Standard of the People's Republic of China, Internal Laboratory Testing Procedures

DB53/T 681-2015 Testing Laboratory Internal Calibration Specifications
DB53/T 1064.3-2021 Green Peacock Quarantine Technology Part 3: Technical Specifications for Feather Lice Laboratory Testing
DB53/T 1059.2-2021 The quarantine technology of Yunnan snub-nosed monkey part 2: Technical specification for laboratory detection of Trichocephala elegans
DB53/T 1059.4-2021 Yunnan snub-nosed monkey quarantine technology part 4: Shigella laboratory testing technical specifications
DB53/T 1064.2-2021 Green Peacock Quarantine Technology Part 2: Technical Specifications for Laboratory Detection of Avian Influenza Virus
DB53/T 1059.3-2021 Yunnan snub-nosed monkey quarantine technology part 3: Technical specifications for laboratory detection of Cryptosporidium
DB53/T 1064.1-2021 Green Peacock Quarantine Technology Part 1: Technical Specifications for Laboratory Testing of Avian Paramyxovirus
DB53/T 1064.4-2021 Green Peacock Quarantine Technology Part 4: Technical Specifications for Laboratory Testing of Gastrointestinal Nematodes
DB53/T 1059.1-2021 Yunnan snub-nosed monkey quarantine technology part 1: Laboratory testing technical specifications for Clostridium perfringens

SCC, Internal Laboratory Testing Procedures

UNE 171330-2:2009 Indoor air quality. Part 2: Indoor air quality inspection procedures.
ASTM Adjunct E691-01 Program to Compute the Within-Lab and Between-Lab Variation of a Test Method from an Interlaboratory Round Robin Study
DANSK DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
SN-CEN/TR 10350:2013 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
SN-CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
BS PD CEN/TR 10350:2013 Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
UNE-CEN/TS 14793:2008 EX Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
SN-CEN/TS 14793:2005 Stationary source emission — Intralaboratory validation procedure for an alternative method compared to a reference method
DANSK DS/ISO 10140-4:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements
NS-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
AENOR UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
DANSK DS/EN ISO 15195:2019 Laboratory medicine – Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
ASTM D7782-12 Standard Practice for Determination of the 99%/95% Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
DANSK DS/ISO 17822:2020 In vitro diagnostic test systems – Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens – Laboratory quality practice guide
DIN EN ISO 15195 E:2018 Draft Document - Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO/DIS 15195:2018); German and English version prEN ISO 15195:2018
NS-EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
DANSK DS/EN ISO 10140-4:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
NS-EN ISO 10140-4:2010 Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
NS-EN 17136:2019 Water quality — Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
DANSK DS/EN 17136:2019 Water quality – Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
DANSK DS/EN 60793-1-30:2011 Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test
CEI EN 60793-1-30:2012 Optical fibres Part 1-30: Measurement methods and test procedures - Fibre proof test
DIN 45673-6 E:2009 Draft Document - Mechanical vibration - Resilient elements used in railway tracks - Part 6: Laboratory test procedures for under-sleeper pads
DIN 45673-5 E:2008 Draft Document - Mechanical vibration - Resilient elements used in railway tracks - Part 5: Laboratory test procedures for under-ballast mats
DIN EN 17136 E:2017 Draft Document - Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macro-invertebrates from inland surface waters; German and English version prEN 17136:2017
DANSK DS/ISO 17892-10:2019 Geotechnical investigation and testing – Laboratory testing of soil – Part 10: Direct shear tests
DANSK DS/ISO 17892-11:2019 Geotechnical investigation and testing – Laboratory testing of soil – Part 11: Permeability tests
DANSK DS/EN ISO 17892-1/A1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
DANSK DS/EN ISO 17892-1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
CAN/CSA-C22.2 No.61010-2-051-2004(C2014) Safety regulations for electrical measuring, regulating and laboratory apparatus - Part 2-051: Particular requirements for laboratory apparatus used for mixing and stirring
DANSK DS/CWA 50272:2021 Methodology, procedures and equipment required for the laboratory testing of a modular and crosscutting Power Take-Off for wave energy converters
DANSK DS/EN ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
DANSK DS/EN ISO 17892-3:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
DIN ISO 16331-1 E:2018 Draft Document - Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017); Text in German and English
NS-EN ISO 17892-6:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test (ISO 17892-6:2017)
DANSK DS/ISO 17892-12/AMD 2:2020 Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of liquid and plastic limits
DANSK DS/EN ISO 17892-6:2017 Geotechnical investigation and testing – Laboratory testing of soil – Part 6: Fall cone test (ISO 17892-6:2017)
DANSK DS/EN ISO 17892-10:2019 Geotechnical investigation and testing – Laboratory testing of soil – Part 10: Direct shear tests (ISO 17892-10:2018)
NS-EN ISO 17892-10:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests (ISO 17892-10:2018)
DIN EN ISO 17892-1 E:2013 Draft Document - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content; German version prEN ISO 17892-1:2013
DIN 45673-8 E:2015 Draft Document - Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
NS-EN ISO 17892-5:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
DANSK DS/EN ISO 17892-5:2017 Geotechnical investigation and testing – Laboratory testing of soil – Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
DANSK DS/EN ISO 17892-11:2019 Geotechnical investigation and testing – Laboratory testing of soil – Part 11: Permeability tests (ISO 17892-11:2019)
NS-EN ISO 17892-11:2019 Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests (ISO 17892-11:2019)

Indonesia Standards, Internal Laboratory Testing Procedures

SNI 2848-2008 Procedure for testing objects in a rock mechanics laboratory
SNI 8059-2014 Standard practice for conducting an interlaboratory test program to determine the precision of test methods for construction materials
SNI 03-6798-2002 Procedure for test specimen production and treatment for compressive and tensile strength laboratory test of soil-cement
SNI 03-6865-2002 Procedure for preparation of inter-laboratory testing program for determining precission of construction materials test method
SNI 03-6804-2002 Manual for laboratory preparation of chemical-grouted soil test specimen for obtaining design strength parameter

Professional Standard - Civil Aviation, Internal Laboratory Testing Procedures

MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory
MH/T 3012.15-2008 Maintenance for civil aircraft.Ground maintenance facilities.Part 15: Calibration & testing lab

AENOR, Internal Laboratory Testing Procedures

UNE 171330-2:2014 Indoor air quality. Part 2: Indoor air quality inspection procedures.
UNE-EN ISO 10140-4:2011 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
UNE 51082:1986 STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL-OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE)
UNE-ENV 1997-2:2001 EUROCODE 7: GEOTECHNICAL DESIGN. PART 2: DESIGN ASSISTED BY LABORATORY TESTING.

US-FCR, Internal Laboratory Testing Procedures

FCR COE ER 1110-1-261-1999 QUALITY ASSURANCE OF LABORATORY TESTING PROCEDURES

HU-MSZT, Internal Laboratory Testing Procedures

MSZ 18567/4.lap-1966 Black coal mine. Laboratory testing content

Korean Agency for Technology and Standards (KATS), Internal Laboratory Testing Procedures

KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
KS E ISO 8858-1:2007 Hard coal－Froth flotation testing－Part 1：Laboratory procedure
KS E ISO 8858-1:2022 Hard coal — Froth flotation testing — Part 1: Laboratory procedure
KS P ISO 17822:2021 In vitro diagnostic test systems — Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide
KS F ISO 10140-4:2016 Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements
KS F ISO 10140-4-2016(2021) Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements
KS F ISO 10140-4-2021 Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements
KS P 1977-2018 Protocol for evaluation of qualitative test performance in in-vitro diagnostic medical laboratory
KS M ISO 5350-1:2007 Pulps－Estimation of dirt and shives－Part 1：Inspection of laboratory sheets by transmitted light
KS M ISO 5350-1:2017 Pulps－Estimation of dirt and shives－Part 1：Inspection of laboratory sheets by transmitted light
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS B ISO 9459-1:2003 Solar heating－Domestic water heating systems－Part 1：Performance rating procedure using indoor test methods
KS B ISO 9459-1-2003(2018) Solar heating - Residential solar hot water supply system - Part 1: Performance evaluation procedure using indoor test method
KS P 2094-2020 Protocol for measurement procedures comparison and bias estimation using patient samples in in-vitro diagnostic medical laboratory
KS C IEC 60512-5:2004 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 5:Impact tests(free components), static load tests(fixed components), endurance tests and overload tests
KS C IEC 60512-5:2014 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 5:Impact tests(free components), static load tests(fixed components), endurance tests and overload tests

British Standards Institution (BSI), Internal Laboratory Testing Procedures

BS ISO 8858-1:2019 Hard coal. Froth flotation testing - Laboratory procedure
BS EN ISO 15195:2019 Laboratory medicine. Requirements for the competence of calibration laboratories using reference measurement procedures
BS 7530-1:1992(2007) Methods for Froth flotation testing of hard coal — Part 1 : Laboratory procedure
BS PD CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
BS ISO 17822:2020 In vitro diagnostic test systems. Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens. Laboratory quality practice guide
BS EN ISO 10140-4:2021 Acoustics. Laboratory measurement of sound insulation of building elements. Measurement procedures and requirements
19/30381866 DC BS ISO 17822-2. In vitro diagnostic test systems. Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens - Part 2. Laboratory quality practice guide
BS ISO 17822:2020(2021) In vitro diagnostic test systems — Nucleic acid amplification - based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide
15/30316475 DC BS EN ISO 10140-4. Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement procedures and requirements
20/30404156 DC BS EN ISO 10140-4. Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement procedures and requirements
BS EN 17136:2019 Water quality. Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
20/30419948 DC BS EN 17542-1. Earthworks. Geotechnical laboratory tests. Part 1. Degradability
BS ISO 16331-1:2017 Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
20/30419954 DC BS EN 17542-2. Earthworks. Geotechnical laboratory tests. Part 2. Fragmentability test standard
BS EN 61300-3-46:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Measurement. Bore diameter for guide pin in MT ferrules
BS EN 61300-3-36:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules
BS EN 61300-3-4:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Attenuation
BS EN 61300-3-1:2005 Fire optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
BS EN 61300-3-1:2006 Fire optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual examination
BS IEC 61300-3-21:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Switching time
BS EN 993-13:1995 Methods of test for dense shaped refractory products - Specification for pyrometric reference cones for laboratory use

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Internal Laboratory Testing Procedures

ASHRAE 68-1986 Laboratory Method of Testing In-Duct Sound Power Measurement Procedure for Fans (AMCA 330-86)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Internal Laboratory Testing Procedures

GB/T 21919-2022 Laboratory medicine—Requirements for the competence of calibration laboratories using reference measurement procedures
GB/T 32146.3-2015 Technical requirements of design and construction for inspection and testing laboratory—Part 3: Food laboratory
GB/T 32146.2-2015 "Technical requirements of design and construction for inspection and testing laboratory—Part 2: Electrical laboratory"
GB/T 32146.2-2015(俄语版) Technical requirements for the design and construction of inspection and testing laboratories Part 2: Electrical laboratories (Russian)
GB/T 37986-2019 General technical specification for mobile laboratory of engineering test
GB/T 32146.3-2015(法语版) Technical requirements for the design and construction of inspection and testing laboratories Part 3: Food laboratories (French translation)
GB/T 27476.1-2014 Safety in testing laboratories.Part 1:General aspects
GB/T 22274.1-2008 Guidance for authorities overseeing good laboratory practice - part 1: guidance for procedures for overseeing compliance with good laboratory practice
GB/T 27476.2-2014 Safety in testing laboratories.Part 2:Electrical aspects
GB/T 27476.3-2014 Safety in testing laboratories.Part 3:Mechanical aspects
GB/T 27476.5-2014 Safety in testing laboratories.Part 5:Chemical aspects
GB/T 27476.7-2022 Safety in testing laboratories—Part 7：Ergonomic aspects
GB/T 32146.1-2015 Technical requirements of design and construction for inspection and testing laboratory—Part 1: General specification
GB/T 27476.4-2014 Safety in testing laboratories.Part 4: Non-ionizing radiations aspects
GB/T 32146.1-2015(法语版) Technical requirements for the design and construction of inspection and testing laboratories Part 1: General requirements (French)
GB/T 26610.1-2011 Guideline for implementation of risk-based inspection of pressure equipment system.Part 1:Basic requirements and implementation procedure
GB/T 26610.1-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 1：Basic requirements and implementation procedure
GB/T 17213.14-2005 Industrial-process control valves.Part 8-2: Noise considerations.Laboratory of noise generated by hydrodynamic flow through control valves

Danish Standards Foundation, Internal Laboratory Testing Procedures

DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/ISO 17822:2020 In vitro diagnostic test systems – Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens – Laboratory quality practice guideLaboratory quality practice guide
DS/CEN/TS 14793:2007 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
DS/EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
DS/ISO 10140-4:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements
DS/EN ISO 10140-4:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
DS/ISO 140-1:1991 Acoustics. Measurement of sound insulation in buildings and of building elements. Part 1: Requirements for laboratories
DS/CWA 50272:2021 Methodology, procedures and equipment required for the laboratory testing of a modular and crosscutting Power Take-Off for wave energy converters

Association Francaise de Normalisation, Internal Laboratory Testing Procedures

FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
NF S31-049-4*NF EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4 : measurement procedures and requirements
NF EN ISO 10140-4:2021 Acoustics - Laboratory measurement of the sound insulation of construction elements - Part 4: requirements and measurement procedures
NF EN 17542-2:2022 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test
NF V03-110:1998 Analysis of agri-foodstuffs. Intralaboratory validation procedure for an alternative method compared to ? reference method. Case of quantitative analysis methods.
NF EN ISO 15195:2019 Medical biology - Requirements for the competence of calibration laboratories using reference measurement procedures
NF C97-331*NF EN 61094-1:2001 Measurement microphones - Part 1 : specifications for laboratory standard microphones.
NF EN ISO 17892-6:2017 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 6: cone penetration test
NF EN ISO 17892-11:2019 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 11: permeability tests
NF EN ISO 7263-1:2019 Fluted paper - Determination of flat compressive strength after fluting in the laboratory - Part 1: fluted A
NF C93-903-1:1998 Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-1 : examinations and measurements. Visual examination.
NF P94-512-11*NF EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11 : permeability tests
NF EN ISO 17892-1:2014 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 1: determination of water content
NF EN ISO 17892-7:2018 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 7: uniaxial compression test
NF EN ISO 17892-8:2018 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 8: unconsolidated undrained triaxial test
NF P94-512-10*NF EN ISO 17892-10:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 10 : direct shear tests
NF P94-512-1*NF EN ISO 17892-1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1 : determination of water content
NF EN ISO 17892-5:2017 Reconnaissance and geotechnical tests - Laboratory tests on soils - Part 5: edometer step loading test
NF EN ISO 17892-2:2014 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 2: determination of the density of fine soil
NF C93-903-11*NF EN 61300-3-11:1998 Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 3-1 : examinations and measurements. Engagement and separation forces.
NF S31-049-4:2013 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: measurement procedures and requirements
NF P94-512-4*NF EN ISO 17892-4:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 4 : Determination of particle size distribution
NF P94-512-3*NF EN ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3 : determination of particle density
NF P94-512-2*NF EN ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2 : determination of bulk density
NF P94-512-7*NF EN ISO 17892-7:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 7 : unconfined compression test
NF EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for duct silencers and terminal units - Insertion loss, flow noise and total pressure loss
NF P94-512-12*NF EN ISO 17892-12:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 12 : determination of liquid and plastic limits
NF EN ISO 17892-3:2015 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 3: determination of the density of solid particles
NF EN ISO 17892-4:2018 Geotechnical reconnaissance and testing - Laboratory tests on soils - Part 4: Determination of particle size distribution
NF C93-903-36*NF EN 61300-3-36:2000 Fibre optic interconnecting devices and passives components - Basic test and measurement procedures - Part 3-36 : examinations and measurements - measurrement methods for the inside and outside diameters of fibre optic connector ferrules.

European Committee for Standardization (CEN), Internal Laboratory Testing Procedures

CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
EN ISO 17892-1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)
CEN ISO/TS 17892-6/AC:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO/TS 17892-6:2004)
EN ISO 17892-1:2014/A1:2022 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/Amd 1:2022)
CEN ISO/TS 17892-5/AC:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO/TS 17892-5:2004)
EN ISO 5350-1:1998 Pulp - Estimation of Dirt and Shives - Part 1: Inspection of Laboratory Sheets ISO 5350-1:1998
EN ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
EN ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
EN ISO 5350-1:2006 Pulp - Estimation of Dirt and Shives - Part 1: Inspection of Laboratory Sheets
EN ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

Society of Automotive Engineers (SAE), Internal Laboratory Testing Procedures

SAE J346-1968 SEATBACK ASSEMBLY LABORATORY IMPACT TEST PROCEDURE-HEAD AREA
SAE J944A-1968 STEERING CONTROL SYSTEM — PASSENGER CAR — LABORATORY TEST PROCEDURE
SAE J1633-1995 Laboratory Speed Test Procedure for Light Truck Tires
SAE J944-2022 Steering Control System - Passenger Car - Laboratory Test Procedure
SAE J2425-1998 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J921-1981 Motor Vehicle Instrument Panel Laboratory Impact Test Procedure-Head Area
SAE J346-1981 Motor Vehicle Seatback Assembly Laboratory Impact Test Procedure-Head Area

GSO, Internal Laboratory Testing Procedures

OS GSO ISO 8858-1:2013 Hard coal - Froth flotation testing - Part 1: Laboratory procedure
GSO ISO 8858-1:2013 Hard coal - Froth flotation testing - Part 1: Laboratory procedure
GSO ISO 10140-4:2013 Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements
BH GSO ISO 10140-4:2016 Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements
OS GSO 374:1994 Code of practice for the inspection and testing of steam and hot water boilers --Part4: Comprehensive procedure for thermal performance tests
OS GSO 373:1994 Code of practice for the inspection and testing of steam and hot water boilers--part3: concise procedure for thermal performance test
GSO IEC 60793-1-30:2016 Optical fibres – Part 1- 30: Measurement methods and test procedures – Fibre proof test
BH GSO IEC 60793-1-30:2017 Optical fibres – Part 1- 30: Measurement methods and test procedures – Fibre proof test
OS GSO IEC 60793-1-30:2016 Optical fibres – Part 1- 30: Measurement methods and test procedures – Fibre proof test
OS GSO ISO 16331-1:2013 Optics and optical instruments -- Laboratory procedures for testing surveying and construction instruments -- Part 1: Performance of handheld laser distance meters
GSO ISO 16331-1:2013 Optics and optical instruments -- Laboratory procedures for testing surveying and construction instruments -- Part 1: Performance of handheld laser distance meters
GSO ISO/TS 17892-5:2013 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 5: Incremental loading oedometer test
GSO ISO/TS 17822-1:2015 In vitro diagnostic test systems -- Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens -- Part 1: General requirements, terms and definitions
GSO ISO 5350-1:2015 Pulps -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets by transmitted light
BH GSO ISO 9459-1:2016 Solar heating -- Domestic water heating systems -- Part 1: Performance rating procedure using indoor test methods
GSO ISO 9459-1:2013 Solar heating -- Domestic water heating systems -- Part 1: Performance rating procedure using indoor test methods
OS GSO ISO 9459-1:2013 Solar heating -- Domestic water heating systems -- Part 1: Performance rating procedure using indoor test methods
OS GSO ISO/TS 17892-4:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

GOST, Internal Laboratory Testing Procedures

GOST R 59778-2021 Procedures for taking samples of venous and capillary blood for laboratory tests
GOST 8.532-1985 State system for ensuring the uniformity of measurements. Certified reference materials of composition of substances and materials. Procedure for interlaboratory certification

International Organization for Standardization (ISO), Internal Laboratory Testing Procedures

ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
ISO 8858-1:1990 Hard coal; froth flotation testing; part 1: laboratory procedure
ISO 17822:2020 In vitro diagnostic test systems - Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens - Laboratory quality practice guide
ISO 10140-4:2021 Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements
ISO 8858-1:1990/Cor 1:2001 Hard coal - Froth flotation testing - Part 1: Laboratory procedure; Technical Corrigendum 1
ISO 17892-1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
ISO/TS 17892-1:2004 Geotechnical reconnaissance and testing - Laboratory soil testing - Part 1: Determination of water content
ISO/TS 17892-4:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-12:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of Atterberg limits
ISO/TS 17892-2:2004 Geotechnical reconnaissance and testing - Laboratory soil testing - Part 2: Determination of the density of fine soil (First edition)
ISO/TS 17892-5:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
ISO/TS 17892-3:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO 29701:2010 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test
ISO/TS 17892-1:2004/Cor 1:2006 Geotechnical reconnaissance and testing - Laboratory soil testing - Part 1: Determination of water content TECHNICAL CORRECTION 1 (First edition)
ISO/TS 17892-12:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of Atterberg limits
ISO/TS 17892-11:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head
ISO/TS 17892-3:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
ISO/TR 10064-6:2009 Code of inspection practice - Part 6: Bevel gear measurement methods
ISO/TS 17892-11:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head
ISO 17892-10:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests
ISO/TS 17892-2:2004/Cor 1:2006 Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil — Technical Corrigendum 1
ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements

PL-PKN, Internal Laboratory Testing Procedures

PN-EN ISO 15195-2019-04 P Laboratory medicine -- Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
PN-EN ISO 10140-4-2021-10 E Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements (ISO 10140-4:2021)

未注明发布机构, Internal Laboratory Testing Procedures

DIN EN ISO 15195 E:2018-05 Competence requirements for calibration laboratories using reference measurement procedures in laboratory medicine (draft)
DIN EN ISO 10140-4 E:2015-12 Laboratory measurements of sound insulation of acoustic building components Part 4: Measurement procedures and requirements (draft)
DIN EN ISO 10140-4 E:2020-08 Laboratory measurements of sound insulation of acoustic building components Part 4: Measurement procedures and requirements (draft)
DIN EN ISO 17892-4 E:2014-08 Laboratory examination of soils for geotechnical investigation and examination Part 4: Determination of particle size distribution (draft)
ASTM RR-C24-1056 2009 C1501-Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM RR-C24-1053 1996 C1501-Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM RR-C24-1057 2010 C1519-Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
DIN ISO 16331-1 E:2018-10 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters
DIN EN 17136 E:2017-07 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
DIN EN 17542-2 E:2020-08 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard
DIN 45673-8 E:2009-04 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
DIN 45673-8 E:2015-04 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
DIN 45673-8 Beiblatt 1:2013-07 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports; Supplement 1: Test form
DIN EN ISO 17892-5 E:2015-02 Geotechnical Investigation and Testing Soil Laboratory Testing Part 5: Incremental Loading Odometer Testing (Draft)
DIN 45673-9 E:2013-11 Mechanical vibration - Resilient elements used in railway tracks - Part 9: Laboratory test procedures for discrete resilient rail fastening systems
DIN 45673-7 E:2008-07 Mechanical vibration - Resilient elements used in railway tracks - Part 7: Laboratory test procedures for resilient elements of floating slab track systems

Professional Standard - Commodity Inspection, Internal Laboratory Testing Procedures

SN/T 1309.6-2010 Rules for footwear inspection.Part 6:Indoor footwear
SN/T 2294.4-2011 Inspection and quarantine laboratory management.Part 4:Rules for the laboratory accident disposal
SN/T 1932.3-2008 Rules for inspection on import and export garment.Part 3:Indoor wear
SN/T 1843.4-2014 Rules for the inspection of electrical equipment for measurement,control,and laboratory use for import and export.Part 4:Insulation resistance meter
SN/T 1843.2-2013 Rules for the inspection of electrical equipment for measurement, control, and laboratory use for import and export.Part 2:Alternating current static watt-hour meters
SN/T 4652.3-2016 Technical specification for Zika virus disease prevention and control at point of entry.Part 3:Laboratory detecting methods

KR-KS, Internal Laboratory Testing Procedures

KS E ISO 8858-1-2022 Hard coal — Froth flotation testing — Part 1: Laboratory procedure
KS P ISO 17822-2021 In vitro diagnostic test systems — Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide
KS F ISO 10140-4-2016 Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements

German Institute for Standardization, Internal Laboratory Testing Procedures

DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
DIN EN ISO 10140-4:2021-09 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021); German version EN ISO 10140-4:2021
DIN V VDE V 0126-18-4-2:2007 Solar wafers - Part 4-2: Process for measuring the electrical characteristics of silicon - Minority carrier lifetime, Laboratory measuring method
DIN EN 17136:2019-12 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters; German version EN 17136:2019
DIN EN 17136:2019 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
DIN EN 17542-2:2022 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard
DIN EN 17542-2:2022-08 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard; German version EN 17542-2:2022
DIN EN 17542-1:2022-08 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard; German version EN 17542-1:2022
DIN ISO 16331-1:2020-09 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
DIN EN ISO 17892-10:2019-04 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018); German version EN ISO 17892-10:2018
DIN EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021); German version EN ISO 10140-4:2021
DIN EN ISO 17892-11:2021-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019); German version EN ISO 17892-11:2019
DIN EN 61300-3-36:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements; Measurement methods for the inside and outside diameters of fibre optic connector ferrules (IEC 61300-3-36:2000)
DIN ISO 16331-1:2020 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)
DIN EN ISO 17892-1:2022-08 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014 + Amd 1:2022); German version EN ISO 17892-1:2014 + A1:2022
DIN 45673-8:2018 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
DIN 45673-8 Beiblatt 1:2020-02 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports; Supplement 1: Test form, with CD-ROM / Note: CD-ROM
DIN 45673-8:2018-12 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
DIN EN ISO 17892-8:2018-07 Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018); German version EN ISO 17892-8:2018
DIN EN ISO 17892-2:2015-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014); German version EN ISO 17892-2:2014
DIN EN ISO 17892-3:2016-07 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15); German version EN ISO 17892-3:2015
DIN EN ISO 17892-4:2017-04 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016); German version EN ISO 17892-4:2016
DIN EN ISO 17892-12:2022-08 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018 + Amd 1:2021 + Amd 2:2022); German version EN ISO 17892-12:2018 + A1:2021 + A2:2022
DIN EN ISO 17892-6:2017-07 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017); German version EN ISO 17892-6:2017
DIN 45673-9 Beiblatt 1:2015-08 Mechanical vibration - Resilient elements used in railway tracks - Part 9: Laboratory test procedures for discrete resilient rail fastening systems; Supplement 1: Test form, with CD-ROM
DIN 45673-9:2015-08 Mechanical vibration - Resilient elements used in railway tracks - Part 9: Laboratory test procedures for discrete resilient rail fastening systems
DIN EN ISO 17892-4:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016); German version EN ISO 17892-4:2016
DIN EN ISO 17892-5:2017-08 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO 17892-5:2017); German version EN ISO 17892-5:2017
DIN 41636-1:1980 Sensitive switches for communication technology; climatic test categories, measuring methods and testing procedures
DIN EN 60512-1-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination; Section 3: Test 1c: Electrical engagement length (IEC 60512-1-3:1997); German version EN 60512-1-3:1997
DIN EN ISO 29701:2011 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test (ISO 29701:2010); German version EN ISO 29701:2010
DIN EN ISO 7235:2010-01 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2009
DIN 45673-7:2010-08 Mechanical vibration - Resilient elements used in railway tracks - Part 7: Laboratory test procedures for resilient elements of floating slab track systems

API - American Petroleum Institute, Internal Laboratory Testing Procedures

API RP 13I SPANISH-1995 Práctica Recomendada Procedimiento Estándar Para Las Pruebas De Laboratorio Con Fluidos De Perforación (QUINTA EDICION)
API RP 13I-2000 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Sixth Edition)
API RP 13I-1990 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (FOURTH EDITION)
API RP 13I SUPP 1-1992 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Fourth Edition)
API RP 13I-1985 RECOMMENDED PRACTICE STANDARD PROCEDURE FOR LABORATORY TESTING DRILLING FLUIDS SECOND EDITION; SUPPLEMENT 1 - 1986
API RP 13I-1988 RECOMMENDED PRACTICE STANDARD PROCEDURE FOR LABORATORY TESTING DRILLING FLUIDS THIRD EDITION; SUPPLEMENT 1 - JUNE 1989
API RP 13I-1995 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Supplement 1 - July 1996; Supplement 2 - June 1997)
API PUBL 4657-1997 Effects of Sampling and Analytical Procedures on the Measurement of Geochemical Indicators of Intrinsic Bioremediation: Laboratory and Field Studies

Jilin Provincial Standard of the People's Republic of China, Internal Laboratory Testing Procedures

DB22/T 3038-2019 Technical regulations for laboratory testing of edible dog diseases

SAE - SAE International, Internal Laboratory Testing Procedures

SAE J944-1968 STEERING CONTROL SYSTEM - PASSENGER CAR - LABORATORY TEST PROCEDURE
SAE J944-1965 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
SAE J944-1980 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
SAE J2425-2021 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J2425-2004 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J921B-1971 MOTOR VEHICLE INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURES - HEAD AREA

Inner Mongolia Provincial Standard of the People's Republic of China, Internal Laboratory Testing Procedures

DB15/T 2843.3-2022 Management Standards for Plague Testing Laboratories at Border Ports Part 3: Plague Nucleic Acid Testing Laboratories
DB15/T 2843.2-2022 Management Standards for Plague Testing Laboratories at Frontier Ports Part 2: Plague Rapid Screening Laboratory
DB15/T 2843.1-2022 Management Standards for Plague Testing Laboratories at Frontier Ports Part 1: General Rules

American Society for Testing and Materials (ASTM), Internal Laboratory Testing Procedures

ASTM D4210-89(1996)e1 Standard Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data
ASTM D7782-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM D7783-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM F3539-24 Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D6617-13 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM C1210-18 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C1501-09 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1501-14 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1501-23 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1519-10(2017) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C943-96 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
ASTM D6091-07(2014) Standard Practice for 99?%/95?% Interlaboratory Detection Estimate 40;IDE41; for Analytical Methods with Negligible Calibration Error
ASTM C1501-04 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1501-19 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

ES-UNE, Internal Laboratory Testing Procedures

UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
UNE-EN ISO 10140-4:2022 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
UNE-EN 17136:2020 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
UNE 102045:2019 Procedure for monitoring and characterisation of installation of construction systems with gypsum plasterboards for laboratory measurements of airborne sound insulation
UNE-EN 60793-1-30:2011 Optical fibres -- Part 1-30: Measurement methods and test procedures - Fibre proof test (Endorsed by AENOR in June of 2011.)
UNE-EN 17542-1:2023 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard.
UNE-EN 17542-2:2023 Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard.
UNE-EN ISO 17892-6:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017)
UNE-EN ISO 17892-10:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
UNE-EN ISO 17892-11:2020 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)
UNE-EN ISO 17892-5:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
UNE-EN ISO 17892-1:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)
UNE-EN ISO 17892-2:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
UNE-EN ISO 17892-4:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016)
UNE-EN ISO 17892-3:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15)
UNE-EN ISO 17892-8:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018)

US-CFR-file, Internal Laboratory Testing Procedures

CFR 40-1065.15-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.15:Overview of procedures for laboratory and field testing.
CFR 10-430.25-2014 Energy. Part430:Energy conservation program for consumer products. SubpartB:Test Procedures. Section430.25:Laboratory Accreditation Program.

CEN - European Committee for Standardization, Internal Laboratory Testing Procedures

PD CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
EN 17136:2019 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
EN ISO 17892-10:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
DD ENV 1997-2-1999 Eurocode 7: Geotechnical Design - Part 2: Design Assisted by Laboratory Testing

RU-GOST R, Internal Laboratory Testing Procedures

GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R 53133.1-2008 Clinical laboratory technologies. Quality control of clinical laboratory tests. Part 1. Limits of allowable errors of the results of the analyte measurements in clinical-diagnostics laboratories
GOST 8.298-2013 State system for ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Verification procedure
GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST 8.292-2013 State system for ensuring the uniformity of measurements. Laboratory conductometers of liquid. Verification procedure
GOST 19.401-1978 Unified system for program documentation. Text of program. Requirements to contents and form of presentation
GOST ISO 16000-3-2016 Indoor air. Part 3. Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method
GOST R ISO 10140-4-2012 Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement methods and procedures

IT-UNI, Internal Laboratory Testing Procedures

UNI EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
UNI EN ISO 17892-12:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits

American National Standards Institute （ANSI), Internal Laboratory Testing Procedures

ANSI/ASTM D6617:2013 Practice For Laboratory Bias Detection Using Single Test Result from Standard Material
ANSI/ASTM D6617:2021 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

UNKNOWN, Internal Laboratory Testing Procedures

MATU 001.1-2016 Inspection and Testing Laboratory Safety Level Assessment Standards Part 1: General Principles
农业农村部公告第323号-24-2020 Good Laboratory Practice for Genetically Modified Organisms Part 3: Food Safety Testing

YU-JUS, Internal Laboratory Testing Procedures

JUS M.N4.813-1987 Braking of road vehicles, tractors and earth moving machiner/. Laboratory evaluation ofbrake functio-nal characteristics — test procedure
JUS U.J5.060-1983 Testing methods of heat transfer troughout of bilding constructtons in laboratory
JUS U.J6.230-1984 Building acoustics. Laboratory test on the noise emitted by valves, fittings and equipment in water supply installations. Measuring procedure and test arrangement
JUS M.N3.323-1987 Clutch for motor vehicles, traktors and earth-moving machinery.Laboratory experiments functional clutch fasings. General procedure

Standard Association of Australia （SAA）, Internal Laboratory Testing Procedures

AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct

US-CLSI, Internal Laboratory Testing Procedures

CLSI H18-A4-2010 Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests

ANSI - American National Standards Institute, Internal Laboratory Testing Procedures

N15.51-1990 Nuclear Materials Management - Measurement Control Program - Nuclear Materials Analytical Chemistry Laboratory (INMM)
N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (INMM)

Xinjiang Provincial Standard of the People's Republic of China, Internal Laboratory Testing Procedures

DB65/T 4553-2022 Specifications for biosafety risk monitoring procedures for novel coronavirus etiology laboratories

国家市场监督管理总局、中国国家标准化管理委员会, Internal Laboratory Testing Procedures

GB/T 27476.6-2020 Safety in testing laboratories—Part 6:Ionising radiations aspects
GB/T 17213.14-2018 Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves

Lithuanian Standards Office , Internal Laboratory Testing Procedures

LST EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
LST EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)

AT-ON, Internal Laboratory Testing Procedures

OENORM EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
OENORM EN ISO 17892-11:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)

VN-TCVN, Internal Laboratory Testing Procedures

TCVN 1773-13-1999 Agricultural wheeled tractors.Test procedures.Part13.Operator's seat.Laboratory measurement of transmitted vibration

Shaanxi Provincial Standard of the People's Republic of China, Internal Laboratory Testing Procedures

DB61/T 1327.11-2023 Qualification Certification of Inspection and Testing Institutions Part 11: Management Specifications for Laboratory Sample Records and Testing Records

Association of German Mechanical Engineers, Internal Laboratory Testing Procedures

DVS-EWF 1178 Beiblatt 2-1997 DVS-EWF Course - Welding Inspector Level 1 to Level 4 - Technical Inspection Training Laboratory Facilities; Personnel Requirements

PT-IPQ, Internal Laboratory Testing Procedures

NP EN ISO 5350-1:2000 Pulps Estimation of dirt and shives Part 1:Inspection of laboratory sheets(ISO 5350-1:1997)

Taiwan Provincial Standard of the People's Republic of China, Internal Laboratory Testing Procedures

CNS 15125-1-2007 Solar heating - Domestic water heating systems - Part 1 : Performance rating procedure using indoor test methods

AASHTO - American Association of State Highway and Transportation Officials, Internal Laboratory Testing Procedures

R 18-1997 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories (Nineteenth Edition)
R 18-1993 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories (Eighteenth Edition)

CZ-CSN, Internal Laboratory Testing Procedures

CSN 73 0513-1983 Measurement of aound insulation in buildings and of building elements. Laboratory measurements of airborne sound insulation
CSN ISO 140-1:1993 Acoustics-Measurement of sound insulation in buildings and of building elements. Part 1: Requirements for laboratories
CSN CEN ISO/TS 17892-10:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests

Institute of Electrical and Electronics Engineers (IEEE), Internal Laboratory Testing Procedures

IEEE 2003.2-1996 Standard for Information Technology - Test Methods for Measuring Conformance to POSIX - Part 2: Shell and Utilities Interfaces IEEE Computer Society Document

SE-SIS, Internal Laboratory Testing Procedures

SIS SS 02 72 21-1-1990 Test methods for wood preservatives — Laboratory method for determining the preventive effectiveness of a preservative treatment against blue stain in service — Part 1: Brushing procedure

National Association of Corrosion Engineers (NACE), Internal Laboratory Testing Procedures

NACE TM0103-2003 Laboratory Test Procedures for Evaluation of SOHIC Resistance of Plate Steels Used in Wet H2S Service Item No:21242

Professional Standard - Agriculture, Internal Laboratory Testing Procedures

WS/T 10011.5-2023 Terminology standards for commonly used terms in public health testing and evaluation laboratories Part 5: Molecular biology testing
农业农村部公告第111号-17-2018 Good Laboratory Practice for Genetically Modified Organisms Part 2: Environmental Safety Testing
WS/T 10011.2-2023 Terminology standards for commonly used terms in public health testing and evaluation laboratories Part 2: Physical and chemical testing (partly replaces WS/T 455-2014)
WS/T 10011.3-2023 Standard terminology for common terms in public health testing and evaluation laboratories Part 3: Microbial testing (partially replaces WS/T 455-2014)

NL-NEN, Internal Laboratory Testing Procedures

NEN-EN 302-2-1993 Adhesives for load-bearing timber stuctures. Test methods. Part 2: Determination of resistance to delamination (Laboratory method)

Agricultural Standard of the People's Republic of China, Internal Laboratory Testing Procedures

农业部2259号公告-19-2015 Good laboratory practice for genetically modified organisms.Part 1:Molecular characteristics detection

国家质量监督检验检疫总局, Internal Laboratory Testing Procedures

SN/T 4346.8-2015 Technical Specifications for Health and Quarantine of Violent Contact Infectious Diseases at Border Ports Part 8: Laboratory Testing
SN/T 4301.3-2015 General Technical Requirements for Import and Export Textiles Part 3: Guidelines for Establishing Laboratory Standard Operating Procedures

Underwriters Laboratories (UL), Internal Laboratory Testing Procedures

UL 2997-2020 Environmental Claim Validation Procedure (ECVP) for Determination and Verification of Chemical and Particle Emissions from Combustion Devices Used Indoors

PH-BPS, Internal Laboratory Testing Procedures

PNS ISO 17892-1:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
PNS ISO 17892-2:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
PNS ISO 17892-3:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
PNS ISO 17892-4:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

The American Road & Transportation Builders Association, Internal Laboratory Testing Procedures

AASHTO R 18-1997 Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories HM-22; Part IB

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Internal Laboratory Testing Procedures

ASHRAE LO-09-044-2009 An Experimental Evaluation of HVAC-Grade Carbon Dioxide Sensors-Part I: Test and Evaluation Procedure