ZH
RU
ES

Roundness Sieve

Roundness Sieve, Total:460 items.

In the international standard classification, Roundness Sieve involves: Linear and angular measurements, Agricultural machines, implements and equipment, Thermodynamics and temperature measurements, Non-metalliferous minerals, On-board equipment and instruments, Fuels, Coals, Metalliferous minerals, Animal feeding stuffs, Medical equipment, Particle size analysis. Sieving, Soil quality. Pedology, Cutting tools, Paint ingredients, Fertilizers, Tea. Coffee. Cocoa, Construction materials, Products of the chemical industry, Machine tool systems, Lubricants, industrial oils and related products, Analytical chemistry, Pulps, Astronomy. Geodesy. Geography, Cork and cork products, Measurement of volume, mass, density, viscosity, Powder metallurgy, Paints and varnishes, Refractories, Dentistry, Testing of metals, Protection against dangerous goods, Non-ferrous metals, Ferroalloys, Inorganic chemicals, Measurement of time, velocity, acceleration, angular velocity, Road engineering, Mining and quarrying, Optics and optical measurements, Technical drawings, Vocabularies, Electrical and electronic testing, Gears, Shipbuilding and marine structures in general, Tobacco, tobacco products and related equipment, Machine tools, Miscellaneous domestic and commercial equipment, Wood, sawlogs and sawn timber, Electrical wires and cables, Spices and condiments. Food additives, Rubber, Glass.

Professional Standard - Forestry, Roundness Sieve

LY/T 1012-1991 Circular swing screen accuracy

林业部, Roundness Sieve

LY 1012-1991 Circular swing screen accuracy

CZ-CSN, Roundness Sieve

CSN 17 6205-1973 Instrument for siftíng
CSN 44 1640-2004 Brown coals - Size analysis by sieving
CSN 99 7101-1990 System EAN. Bar Code UCC/EAN 128. Application Identifiers
CSN 44 1704-1981 Non-ferrous ores and concentrates.Determination of size distribution by sieving and sedimentation analysis
CSN EN 60868-0-1995 Flickermeter.Part 0:Evaluation of flicker severity

Professional Standard - Machinery, Roundness Sieve

JB/T 10028-1999 Roundness measuring instrument
JB/T 10864-2008 Cylindricity measuring instrument
JB/T 53545-1999 Product quality classification of YA circular vibrating screen
JB/T 12199-2015 High-speed roundness measuring instrument for rolling bearings
JB/T 5996-1992 Roundness measurement Assessment of accuracy of three-point measuring method and the measurement instrument used
JB/T 3364.2-2011 Circular sawing machine.Part 2:Testing of the accuracy
JB/T 13096.4-2017 Numerical control circular sawing machine.Part 4: Numerical control circular pendulum sawing machine.Testing of the accuracy
JB/T 7418.3-2014 External cylindrical grinding machines.Parts 3: High accuracy machines.Testing of the accuracy

Association Francaise de Normalisation, Roundness Sieve

NF X11-511:1988 Tamis et tamisage - Tissus métalliques préformés à mailles carrées et à fils ronds en aciers durs à haute résistance pour criblage industriel
NF L72-410:1954 Aircraft instruments with round dials. Temperature gauges.
NF X11-510:1988 Sieves and sieving. Wire gauze with square apertures made from annealed round wire for industrial use. Wire diameters.
NF E75-233*NF ISO 9284:2013 Abrasive grains - Test-sieving machines
NF M03-040:1995 Hard coal. Size analysis by sieving.
NF V03-308*NF ISO 4150:1991 Green coffee. Size analysis. Manual sieving.
NF ISO 4150:1991 Café vert - Analyse granulométrique - Tamisage manuel.
NF C74-394*NF EN 80601-2-59:2010 Medical electrical equipment - Part 2-59 : particular requirements for basic safety and essential performance of screening thermographs for human febrile temperature screening
NF EN 12948:2010 Amendements minéraux basiques - Détermination de la distribution granulométrique par tamisage par voie sèche et par voie humide
NF L70-110:1986 Aircraft equipment. On board instrument with round dials. General dimensions.
L70-113:1986 Aircraft equipment. On board instrument with round dials in cylindrical housings.
NF C74-394*NF EN IEC 80601-2-59:2019 Medical electrical equipment - Part 2-59 : particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
NF A20-008*NF ISO 4701:1986 Iron ores. Determination of size distribution by sieving.
NF P18-622-2:1996 Tests for geometrical properties of aggregates. Part 2 : determination of particle size distribution. Test sieves, nominal size of apertures.
NF T30-499-1:2011 Coating powders - Part 1 : determination of particle size distribution by sieving.
NF T30-499-1*NF EN ISO 8130-1:2019 Coating powders - Part 1 : determination of particle size distribution by sieving
NF P18-052:1994 Method of testing fly ash. Part 2 : determination of fineness by wet sieving.
NF X34-110-1:2010 Solid biofuels - Determination of particle size distribution - Part 1 : oscillating screen method using sieve apertures of 1 mm and above.
NF EN ISO 8130-1:2019 Poudres pour revêtement - Partie 1 : détermination de la distribution granulmétrique par tamisage
NF L72-110:1986 Aircraft equipment. On board instrument with round dials, mechanical transmission tachometer.
NF EN ISO 12181-1:2011 Spécification géométrique des produits (GPS) - Circularité - Partie 1 : vocabulaire et paramètres de circularité
L70-112:1986 Aircraft equipment. On board instrument with round dials for front and rear mounting.
NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
NF EN 451-2:2017 Méthode d'essai des cendres volantes - Partie 2 : détermination de la finesse par tamisage humide
NF X34-110-2:2010 Solid biofuels - Determination of particle size distribution - Part 2 : vibrating screen method using sieve apertures of 3,15 mm and below.
NF EN 61207-6:2015 Expression des performances des analyseurs de gaz - Partie 6 : analyseurs photométriques
NF EN ISO 12180-1:2011 Spécification géométrique des produits (GPS) - Cylindricité - Partie 1 : vocabulaire et paramètres de cylindricité
NF C46-251-6*NF EN 61207-6:2015 Expression of performance of gas analyzers - Part 6 : photometric analyzers
NF C46-256:1994 Expression of performance of gas analysers. Part 6 : photometric analyzers.
NF U44-182*NF EN 12948:2010 Liming materials - Determination of size distribution by dry and wet sieving
NF E10-113-1*NF EN ISO 12181-1:2011 Geometrical product specifications (GPS) - Roundness - Part 1 : vocabulary and parameters of roundness
NF P12-301*NF EN 1015-1:1999 Methods of test for mortar for masonry. Part 1 : determination of particle size distribution (by sieve analysis).
NF EN 16424:2014 Caractérisation des déchets - Méthode de dépistage pour la détermination de la composition élémentaire au moyen d'analyseurs portables de fluorescence X
NF EN 933-1:2012 Essais pour déterminer les caractéristiques géométriques des granulats - Partie 1 : détermination de la granularité - Analyse granulométrique par tamisage
NF P18-622-1/A1:2006 Tests for geometrical properties of aggregates - Part 1 : determination of particle size distribution - Sieving method.
NF ISO 20977:2019 Amendements minéraux basiques - Détermination de la distribution granulométrique par tamisage à sec ou à l'état humide
NF S12-111*NF EN ISO 8429:1996 Optics and optical instruments. Ophthalmology. Graduated dial scale.
NF EN 1015-1:1999 Méthodes d'essai des mortiers pour maçonnerie - Partie 1 : détermination de la répartition granulométrique (par tamisage).
NF EN 1015-1/A1:2007 Méthodes d'essai des mortiers pour maçonnerie - Partie 1 : détermination de la répartition granulométrique (par tamisage)
NF P18-051-2*NF EN 451-2:2017 Method of testing fly ash - Part 2 : determination of fineness by wet sieving
NF EN ISO 17827-1:2016 Biocombustibles solides - Détermination de la distribution granulométrique des combustibles non comprimés - Partie 1 : méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm
NF EN ISO 17827-2:2016 Biocombustibles solides - Détermination de la distribution granulométrique des combustibles non comprimés - Partie 2 : méthode au tamis vibrant d'ouverture de maille inférieure ou égale à 3,15 mm
NF P18-622-10*NF EN 933-10:2009 Tests for geometrical properties of aggregates - Part 10 : assessment of fines - Grading of filler aggregates (air jet sieving)
NF X31-559*NF ISO 11277:2020 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
NF X34-124-1*NF EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1 : oscillating screen method using sieves with apertures of 3,15 mm and above
NF X34-124-2*NF EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2 : vibrating screen method using sieves with aperture of 3,15 mm and below

API - American Petroleum Institute, Roundness Sieve

API PUBL 332-1995 Comparison of Screening Values from Selected Hydrocarbon Screening Instruments

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Roundness Sieve

GB/T 26098-2010 Roundness measuring instrument
GB/T 19146-2010 Infrared devices for instant screening of human skin temperature
GB/T 5917.1-2008 Determination of feed particle size.Two.sieve screening method
GB/T 19146-2003 General requirements for infrared devices for instant screening of human skin temperature
GB/T 31313-2014 Fluorspar.Determination of particle size distribution by sieving
GB/T 2383-2003 Dyes--Determination of fineness by sieve analysis
GB/T 24192-2009 Chromium ores.Determination of particle size by sieving
GB/T 10322.7-2004 Iron ore-Determination of size distribution by sieving
GB/T 2383-2014 Powder dyes.Determination of fineness by sieve analysis
GB/T 6288-1986 Determination of particle size for granular molecular sieve
GB 6288-1986 Determiantion of particle size for granular molecular sieve
GB 6286-1986 Method for Determination of Bulk Density of Molecular Sieve
GB/T 6286-1986 Determination of bulk density for molecular sieve
GB/T 21997.2-2008 Instrument for soil test.Liquid limit device.Part 2: Fall cone liquid limit device
GB/T 29653-2013 Manganese ores.Determination of size distribution by sieving
GB/T 1480-2012 Metallic powders.Determination of particle size by dry sieving
GB/T 13220-1991 Determination of particle size distribution of fine powder--Method of sieve classfication with sonic wave
GB/T 21782.1-2008 Coating powders.part1: Determination of particle size distribution by sieving
GB/T 2441.7-2001 Determination of Urea Determination of particle size Sieve method
GB/T 3170.1-1982 Determination of particle size of aluminum powder--Mechanical vibration sieve method
GB/T 3170.2-1982 Determination of particle size of aluminum powder--Manual-air-blowing sieve method
GB/T 2441.7-2010 Determination of urea-Part 7: Particle size-Sieve method
GB/T 1480-1995 Determination of particle size for metallic powders--Dry sieving
GB/T 21524-2008 Particle size determination of inorganic chemical products.Sieving method
GB/T 22459.5-2008 Refractory mortars.Part 5:Determination of grain size distribution(sieve analysis)
GB/T 10322.7-2016 Iron ores and direct reduced iron.Determination of size distribution by sieving
GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
GB/T 31225-2014 Test method for the thickness of silicon oxide on Si substrate by ellipsometer
GB/T 4108-1983 Magnesium powders and aluminum-magnesium alloy powders--Determination of particle size by dry sieving method
GB/T 4108-2004 Magnesium powder and aluminium-magnesium alloy powder determination of particle size-Dry sieving method
GB/T 6109.3-1985 Enameled round winding wires--Part 3: Polyvinyl-formal enameled round copper wires with high mechanical properties
GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
GB/T 12807-1991 Laboratory glassware--Graduated pipettes

National Metrological Verification Regulations of the People's Republic of China, Roundness Sieve

JJG 429-2000 Verification Regulation for Measurement Standard Instrument of Roundness and Cylindricity
JJG 380-1995 Verification Regulation of Instruments for Measuring the Diameter、Angle and Straightness of Bearing Tapered Roller
JJG(机械) 85-1992 Verification regulations for tapered roller diameter, angle and linearity measuring instrument
JJG 167-2020 Laser particle size distribution analyzer
JJG(机械) 22-1990 Verification rules for tapered roller bearing raceway diameter and angle checker
JJG 886-1995 Verification Regulation of Tester for Measuring Raceway Diameter and Angle of Tapered Roller Bearing Ring
JJG(烟草) 23.1-2009 Verification Regulation of Detecting Instrument of Threshed Tobacco—Part 1:Stacked Sieve Shaker
JJG(烟草)23.1-2009 Verification Regulation of Detecting Instrument of Threshed Tobacco—Part 1:Stacked Sieve Shaker
JJG 950-2012 Verification Regulation of Analyzers for Oil Content in Water

工业和信息化部/国家能源局, Roundness Sieve

JB/T 13251-2017 Cylindrical Sieve Seed Classifier
JB/T 13113.3-2017 Internal cylindrical grinder Part 3: Accuracy inspection of vertical internal cylindrical grinder
JB/T 13096.2-2017 CNC Circular Sawing Machine Part 2: Accuracy Inspection of CNC Horizontal Circular Sawing Machine

National Metrological Technical Specifications of the People's Republic of China, Roundness Sieve

JJF 1827-2020 Calibration Specification for Cement Fineness Negative Pressure Screen Analyzers
JJF 1576-2016 Program of Pattern Evaluation of Infrared Devices for Instant Screening of Human Skin Temperature
JJF(机械) 1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument
JJF(机械)1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument
JJF 1684-2017 Calibration Specification for Comparators for Measuring the Diameter,Angle and Straightness of Bearings'Tapered Roller
JJF 1545-2015 Calibration specification for tapered roller bearing raceway diameter and angle measuring instrument
JJF 1211-2008 Calibration Specification for Static Light Scattering Particle Size Analyzers
JJF(纺织) 065-2013 Calibration Specification for Fiber Diameter Analyzer
JJF(纺织)065-2013 Calibration Specification for Fiber Diameter Analyzer
JJF 1568-2016 Specification for Calibration of Spectrophotometric Flow Analyzers

German Institute for Standardization, Roundness Sieve

DIN 4196:2015-08 Sieving media - Round monofilament yarns
DIN 66165-2:1987 Particle size analysis; sieve analysis; procedure
DIN ISO 9284:2014 Abrasive grains - Test-sieving machines (ISO 9284:2013)
DIN 66165-1:1987 Particle size analysis; sieve analysis; general principles
DIN 66165-2:2016 Particle size analysis - Sieving analysis - Part 2: Procedure
DIN 66165-2:2016-08 Particle size analysis - Sieving analysis - Part 2: Procedure
DIN 18721:1977 Circle graduation with visual reading for surveying instruments
DIN 66165-1:2016 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 66165-1:2022 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 66165-1:2022-06 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
DIN EN ISO 8130-1:2019-08 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019); German version EN ISO 8130-1:2019
DIN EN 16424:2015-03 Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments; German version EN 16424:2014
DIN 52098:2005 Aggregates test methods - Determination of particle size distribution by wet sieving
DIN EN ISO 12181-1:2011-07 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011); German version EN ISO 12181-1:2011
DIN EN 61207-6:1995 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994
DIN EN 12948:2011-02 Liming materials - Determination of size distribution by dry and wet sieving; German version EN 12948:2010
DIN EN 451-2:2017-08 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:2017
DIN EN 61207-6:2016-03 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015 / Note: DIN EN 61207-6 (1995-02) remains valid alongside this standard until 2017-12-30.
DIN EN 451-2:2017 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
DIN ISO/TS 12181-1:2008 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/TS 12181-1:2003); German version CEN ISO/TS 12181-1:2007
DIN EN ISO 8130-1:2019 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)
DIN EN 933-1:2021-07 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German and English version prEN 933-1:2021 / Note: Date of issue 2021-06-11*Intended as replacement for DIN EN 933-1 (2012-03).
DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN EN 933-1:2012-03 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:2012 / Note: To be replaced by DIN EN 933-1 (2021-07).
DIN 51938:2015-09 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
DIN 58542:1996 Reversible spring bow for standard drawing instruments
DIN 22019-1:1985 Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 20 Šm by sieve-analysis
DIN EN ISO 8429:1996 Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986); German version EN ISO 8429:1996
DIN EN 1015-1:2007-05 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis); German version EN 1015-1:1998+A1:2006
DIN EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:2012
DIN EN 933-1:2006 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; English version of DIN EN 933-1:1997 + A1:2005
DIN 22019-1:1985-03 Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution >20 µm by sieve-analysis
DIN EN ISO 8598-1:2015-01 Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO 8598-1:2014); German version EN ISO 8598-1:2014
DIN EN 451-2:1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994
DIN CEN/TS 15149-3:2006 Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method; German version CEN/TS 15149-3:2006
DIN EN 933-2:1996 Test for geometrical properties of aggregates - Part 2: Determination of particle size distribution; test sieves, nominal size of apertures; German version EN 933-2:1995
DIN 58545:1996 Pencil points or divider points for standard drawing instruments (S)

Group Standards of the People's Republic of China, Roundness Sieve

T/GDAQI 102-2023 Infrared devices of human skin temperature for instant screening
T/WHAS 0004-2020 High Precision Color Analyzer

RO-ASRO, Roundness Sieve

STAS 5306-1989 Weigliting apparatus CIHCCLAR GHADUATED DIALS
STAS 5196-1983 DRAW1NG INSTRUMENTS WITH DIVID1NG HEAD

Professional Standard - Aviation, Roundness Sieve

HB 6-62-1975 Aviation Instrument Circular Dial

International Organization for Standardization (ISO), Roundness Sieve

ISO 8876:1989 Fluorspar; determination of particle size distribution by sieving
ISO/DIS 1953:2022 Hard coal — Size analysis by sieving
ISO 6230:1989 Manganese ores; determination of size distribution by sieving
ISO 728:1974 Title missing - Legacy paper document
ISO 1953:1994 Hard coal - Size analysis by sieving
ISO 1953:2015 Hard coal - Size analysis by sieving
ISO 728:2021 Coke - Size analysis by sieving
ISO/CD 18386 Soil quality — Screening method for soil temperature — Measurement by IR thermometer
ISO 9284:1992 Abrasive grains; test-sieving machines
ISO 9284:2013 Abrasive grains - Test-sieving machines
ISO 4150:1980 Green coffee — Size analysis — Manual sieving
ISO 4701:1999 Iron ores - Determination of size distribution by sieving
ISO 4150:1991 Green coffee; size analysis; manual sieving
ISO 8876:1989/Cor 1:1991 Flourspar; determination of particle size distribution by sieving; technical corrigendum 1
ISO 2030:1990 Granulated cork; size analysis by mechanical sieving
ISO 2030:2018 Granulated cork - Size analysis by mechanical sieving
ISO 4701:1985 Iron ores; Determination of size distribution by sieving
ISO 23134:2022 Coffee and coffee products — Determination of particle size of ground roasted coffee — Horizontal sieving motion method using circular brushes
ISO 728:1995 Coke (nominal top size greater than 20 mm) - Size analysis by sieving
IEC 80601-2-59:2008 Medical electrical equipment - Part 2-59: Particular requirements for basic safety and essential performance of screening thermographs for human febrile temperature screening
ISO 8130-1:1992 Coating powders; part 1: determination of particle size distribution by sieving
ISO 8130-1:2019 Coating powders — Part 1: Determination of particle size distribution by sieving
ISO 13765-5:2004 Refractory mortars - Part 5: Determination of grain size distribution (sieve analysis)
ISO 5915:1980 Sodium hexafluorosilicate for industrial use; Determination of particle size distribution; Sieving method
ISO 2926:1974 Aluminium oxide primarily used for the production of aluminium; Particle size analysis; Sieving method
ISO 4701:2019 Iron ores and direct reduced iron — Determination of size distribution by sieving
ISO 4701:2008 Iron ores and direct reduced iron - Determination of size distribution by sieving
ISO 4701:2017 Iron ores and direct reduced iron - Determination of size distribution by sieving
ISO 3118:1976 Sodium perborates for industrial use; Determination of particle size distribution by mechanical sieving
ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
ISO/TS 12181-1:2003 Geometrical Product Specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
ISO 4150:2011 Green coffee or raw coffee - Size analysis - Manual and machine sieving
ISO 12756:1998/Amd 1:2011 Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary - Amendment 1: Viscosity of the writing fluid
ISO 8429:1986 Optics and optical instruments; Ophthalmology; Graduated dial scale
IEC 80601-2-59:2017/Amd 1:2023 Medical electrical equipment — Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening — Amendment 1
ISO 11277:2020 Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation
ISO 3588:1977 Spices and condiments; Determination of degree of fineness of grinding; Hand sieving method (Reference method)
ISO 11277:1998 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation

VN-TCVN, Roundness Sieve

TCVN 251-2007 Hard coal.Size analysis by sieving
TCVN 5225-2007 Coke (nominal top size greater than 20 mm).Size analysis by sieving
TCVN 4807-2013 Green coffee or raw coffee.Size analysis.Manual and machine sieving
TCVN 6862-2012 Soil quality.Determination of particle size distribution in mineral soil material.- Method by sieving and sedimentationMethod by sieving and sedimentation

Korean Agency for Technology and Standards (KATS), Roundness Sieve

KS E ISO 728:2022 Coke — Size analysis by sieving
KS E ISO 1953:2002 Hard coal－Size analysis by sieving
KS M ISO 2030:2004 Granulated cork－Size analysis by mechanical sieving
KS E ISO 6230:2003 Manganese ores－Determination of size distribution by sieving
KS M 5976-1-1999
KS M ISO 8130-1:2008 Coating powders－Part 1：Determination of particle size distribution by sieving
KS M ISO 8130-1:2019 Coating powders — Part 1: Determination of particle size distribution by sieving
KS M 1425-2004(2010) Testing method for particle size distribution of palletized media by sieving
KS E ISO 4701:2020 Iron ores and direct reduced iron —Determination of size distribution by sieving
KS B ISO 12181-1-2014(2019) Geometrical product specifications(GPS) — Roundness — Part 1: Vocabulary and parameters of roundness
KS M 1425-2013 Testing method for particle size distribution of palletized media by sieving
KS C IEC 61207-6-2014(2019) Expression of performance of gas analyzers — Part 6: Photometric analyzers
KS M ISO 2926:2010 Aluminium oxide primarily used for the production of aluminium-Particle size analysis for the range 45μm to 150μm - Method using electroformed sieves
KS B ISO 12181-1:2012 Geometrical product specifications(GPS)-Roundness-Part 1:Vocabulary and parameters of roundness
KS B ISO 12181-1:2014 Geometrical product specifications(GPS) — Roundness — Part 1: Vocabulary and parameters of roundness
KS L 2320-2006 Interchangeable conical glass ground joints
KS B ISO 12180-1:2012 Geometrical product specifications(GPS)-Cylindricity-Part 1:Vocabulary and parameters of cylindrical form
KS B ISO 12180-1:2014 Geometrical product specifications(GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form
KS E ISO 728:2002 Coke(nominal top size greater than 20 mm)－Size analysis by sieving
KS I ISO 11277:2005 Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)

KR-KS, Roundness Sieve

KS E ISO 728-2022 Coke — Size analysis by sieving
KS E ISO 1953-2018(2023) Hard coal — Size analysis by sieving
KS M ISO 8130-1-2019 Coating powders — Part 1: Determination of particle size distribution by sieving
KS E ISO 4701-2020 Iron ores and direct reduced iron —Determination of size distribution by sieving

British Standards Institution (BSI), Roundness Sieve

BS ISO 728:2021 Coke. Size analysis by sieving
BS ISO 1953:2015 Hard coal. Size analysis by sieving
BS ISO 20977:2018 Liming materials. Determination of size distribution by dry and wet sieving
BS EN ISO 8130-1:1993 Coating powders. Determination of particle size distribution by sieving
BS EN ISO 8130-1:2010 Coating powders. Determination of particle size distribution by sieving
BS ISO 13765-5:2004 Refractory mortars - Determination of grain size distribution (sieve analysis)
BS 6620 Pt.1:1991 Industrial plate screens. Guide for screens of thickness 3 mm and above
BS 6620 Pt.2:1991 Industrial plate screens. Guide for screens of thicknessbelow 3 mm
BS EN 80601-2-59:2009 Medical electrical equipment - Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
BS EN 80601-2-59:2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
BS ISO 4150:2012 Green coffee or raw coffee. Size analysis. Manual and machine sieving
DD CEN/TS 15415:2006 Solid recovered fuels — Determination of particle size distribution by screen method
BS ISO 2030:2018 Granulated cork. Size analysis by mechanical sieving
BS EN ISO 8130-1:2019 Tracked Changes. Coating powders. Determination of particle size distribution by sieving
BS EN 933-1:1997 Tests for geometrical properties of aggregates - Determination of particle size distribution - Sieving method
BS EN 933-1:2012 Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method
BS 5663-2:1987 Methods of testing iron ores - Determination of size distribution by sieving
BS 3730-3:1982 Assessment of departures from roundness - Methods for determining departures from roundness using two- and three-point measurement
DD CEN/TS 15149-1:2006 Solid biofuels — Methods for the determination of particle size distribution — Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above
DD CEN/TS 15149-2:2006 Solid biofuels — Methods for the determination of particle size distribution — Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
BS EN ISO 17827-1:2016 Solid biofuels. Determination of particle size distribution for uncompressed fuels. Oscillating screen method using sieves with apertures of 3,15 mm and above
BS PD CEN/TR 15149-3:2014 Solid biofuels. Determination of particle size distribution. Rotary screen method
BS EN 61207-6:2015 Tracked Changes. Expression of performance of gas analyzers. Photometric analyzers
BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above
BS EN 15149-2:2010 Solid biofuels. Determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
BS EN 12948:2010 Liming materials. Determination of size distribution by dry and wet sieving
BS ISO 11277:2010 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
BS ISO 11277:2020 Tracked Changes. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN ISO 8429:1987 Optics and optical instruments - Ophthalmology - Graduated dial scale
BS 3730-2:1982 Assessment of departures from roundness - Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration)
DD CEN/TS 15149-3:2006 Solid biofuels — Methods for the determination of particle size distribution — Part 3: Rotary screen method
BS EN 12948:2002 Liming materials - Determination of size distribution by dry and wet sieving
BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
BS ISO 4701:2019 Tracked Changes. Iron ores and direct reduced iron. Determination of size distribution by sieving

RU-GOST R, Roundness Sieve

GOST 8.481-1982 State system for ensuring the uniformity of measurements. Roundness measuring instruments. Methods and means for verification
GOST 5954.2-1991 Coke. Size analysis (Nominal top size 20 mm or less)
GOST 25469-1993 Alumina. Sieve method for the determination of particle size distribution
GOST ISO 13765-5-2017 Refractory mortars. Determination of grain size distribution (sieve analysis)
GOST 5954.1-1991 Coke. Sieve analysis (nominal top size greater than 20 mm)
GOST 32331-2013 Lubricating Grease. Determination of penetration with a penetrometer with a cone by one-quarter and one-half of the scale
GOST 5368-1981 Cylindrical gear checking machines. Types. Basic parameters. Accuracy limits
GOST 24236-1980 Manganese ores, concentrates and agglomerates. Determination of size distribution by sieving
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy
GOST 24598-1981 Ores and concentrates of non-ferrous metals. Size analysis and sedimentation methods for the determination of size distribution
GOST 32989.1-2014 Solid biofuels. Determination of particle size distribution. Part 1. Oscillating screen method using sieve apertures of 1 mm and above
GOST 32989.2-2014 Solid biofuels. Determination of particle size distribution. Part 2. Vibrating screen method using sieve apertures of 3,15 mm and below
GOST 32989.3-2014 Solid biofuels. Determination of particle size distribution. Part 3. Rotary screen method
GOST 27562-1987 Iron ores, concentrates, sinters and pellets. Determination of size distribution by sieving
GOST R 54190-2010 Solid biofuels. Determination of particle size distribution. Part 3. Rotary screen method

SG-SPRING SG, Roundness Sieve

SS 582-2-2013 Specification for thermal imagers for human temperature screening. Part 2: implementation guidelines
SS 582-1-2013 Specification for thermal imagers for human temperature screening. Part 1: requirements and test methods

Danish Standards Foundation, Roundness Sieve

DS/ISO 1953:1994 Hard coal - Size analysis by sieving
DS/EN 80601-2-59:2010 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
DS/EN ISO 8130-1:2011 Coating powders - Part 1: Determination of particle size distribution by sieving
DS/EN 15149-1:2011 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
DS/EN 15149-2:2011 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
DS/EN ISO 12181-1:2011 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
DS/EN 12948:2011 Liming materials - Determination of size distribution by dry and wet sieving
DS/EN 451-2:1996 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
DS/EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
DS/CEN/TS 15149-3:2006 Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method
DS/ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation

American Society for Testing and Materials (ASTM), Roundness Sieve

ASTM UOP422-66 Particle Size Distribution by Micromesh Sieves
ASTM D6184-98 Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
ASTM UOP563-90 Packed Apparent Bulk Density of Molecular Sieves
ASTM UOP563-14 Packed Apparent Bulk Density of Molecular Sieves
ASTM E276-21 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No. 4) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM UOP914-92 Automated Crush Strength of Catalysts or Molecular Sieves
ASTM E276-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E389-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM E276-13 Standard Test Method for Particle Size or Screen Analysis at No. 4 lpar;4.75-mmrpar; Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E389-13 Standard Test Method for Particle Size or Screen Analysis at No. 4 lpar;4.75-mmrpar; Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves
ASTM E276-03 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E389-93(1998) Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM D7971-20 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7971-15 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D4178-82(2005) Standard Practice for Calibrating Moisture Analyzers
ASTM D4749-87 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D4513-11 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM E389-21 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No.4) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM D4513-97(2006) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-97 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-97(2001)e1 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-11(2017) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-22 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D4749-87(2002)e1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4749-87(2002) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4749-87(2012) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4749-87(2007) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4570-02(2012) Standard Test Method for Rubber Chemicalsmdash;Determination of Particle Size of Sulfur by Sieving (Dry)

Japanese Industrial Standards Committee (JISC), Roundness Sieve

JIS B 7451:1997 Instruments for the assessment of departure from roundness -- Measurement of variations in radius
JIS B 6160:1985 Rotary indexing tables
JIS M 8706:1996 Iron ores -- Determination of size distribution by sieving
JIS T 5505-2:2001 Dental rotary instruments -- Diamond instruments -- Part 2: Discs
JIS T 5505-2:2014 Dental rotary instruments -- Diamond instruments -- Part 2: Discs
JIS M 8706:2022 Iron ores and direct reduced iron -- Determination of size distribution by sieving
JIS M 8706:2008 Iron ores and direct reduced iron -- Determination of size distribution by sieving
JIS M 8706:2015 Iron ores and direct reduced iron -- Determination of size distribution by sieving
JIS B 0682-1:2017 Geometrical product specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness
JIS Z 8781-1:2012 Colorimetry -- Part 1: CIE standard colorimetric observers

ZA-SANS, Roundness Sieve

SANS 6157:2007 Fineness of cement extenders (45 ?m sieve method)

Professional Standard - Petrochemical Industry, Roundness Sieve

SH/T 0340-1992 Determination of crystallinity of NaY molecular sieve

工业和信息化部, Roundness Sieve

HG/T 5336-2018 Determination method of molecular sieve powder falling degree

ES-AENOR, Roundness Sieve

Professional Standard - Agriculture, Roundness Sieve

GB/T 2383-1980 Method for determination of sieve fineness of dyestuffs
GB/T 2448-1991 Determination of urea particle size by sieving method
GB 12807-1991 Laboratory glass instrument graduated pipette

Taiwan Provincial Standard of the People's Republic of China, Roundness Sieve

CNS 12428-2002 Method of Test for Fiber Length of Pulp by Glassification
CNS 9774-1982 Spring Bow Divider for School Orawing Instruments
CNS 8891-1982 Spring - Bow Divider for Precision Drawing Instruments

国家市场监督管理总局、中国国家标准化管理委员会, Roundness Sieve

GB/T 6286-2021 Determination of bulk density for molecular sieve
GB/T 6288-2021 Determination of particle size for granular molecular sieve
GB/T 22459.5-2022 Refractory mortars—Part 5: Determination of grain size distribution ( sieve analysis )
GB/T 40177-2021 Optics and optical instruments—Ophthalmology—Graduated dial scale
GB/T 12807-2021 Laboratory glassware一Graduated pipettes

BE-NBN, Roundness Sieve

NBN-ISO 2030:1992 Granulated cork. Size analysis by mechanical sieving
NBN-ISO 2066:1992 Expanded pure agglomerated cork. Determination of moisture content
NBN-EN 451-2-1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving

GOSTR, Roundness Sieve

GOST 5954.2-2020 Coke. Size analysis nominal top size 20 mm or less
GOST 5954.1-2020 Coke. Sieve analysis (nominal top size greater than 20 mm)
GOST R 58868-2020 Instrument rolling bearings. Deviation from the roundness of the surfaces of parts. Measurement procedure
GOST 34233.2-2017 Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric and conic shells, convex and flat bottoms and covers
GOST 34233.11-2017 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and bottoms according to weld misalignment, angular misalignment and shell nonroundness

Universal Oil Products Company (UOP), Roundness Sieve

UOP 563-2014 Packed Apparent Bulk Density of Molecular Sieves

农业农村部, Roundness Sieve

NY/T 3979-2021 Green coffee particle size analysis manual and mechanical screening

European Committee for Electrotechnical Standardization（CENELEC）, Roundness Sieve

EN IEC 80601-2-59:2019 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers

International Electrotechnical Commission (IEC), Roundness Sieve

IEC 80601-2-59:2017/AMD1:2023 Amendment 1 - Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
IEC 80601-2-59:2008/COR1:2009 Corrigendum 1 - Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
IEC 80601-2-59:2017+AMD1:2023 CSV Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
IEC 65B/622/DTS:2007 IEC 62492-1: Radiation thermometers - Part 1: Specifications for radiation thermometers

Malaysia Standards, Roundness Sieve

MS 396-1976

CEN - European Committee for Standardization, Roundness Sieve

PD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size distribution by screen method
EN ISO 8130-1:2019 Coating powders - Part 1: Determination of particle size distribution by sieving
PD CEN/TS 15149-1:2006 Solid biofuels Methods for the determination of particle size distribution Part 1: Oscillating screen method using sieve apertures of 3@15 mm and above
PD CEN/TS 15149-2:2006 Solid biofuels Methods for the determination of particle size distribution Part 2: Vibrating screen method using sieve apertures of 3@15 mm and below
PD CEN/TS 15149-3:2006 Solid biofuels Methods for the determination of particle size distribution Part 3: Rotary screen method

Indonesia Standards, Roundness Sieve

SNI ISO 13765-5:2010 Refractory Mortars-Part 5: Determination of grain size distribution (sieve analysis)
SNI 7534.2-2010 Wood round leaf width - Part 2: Test

ES-UNE, Roundness Sieve

UNE-EN ISO 8130-1:2020 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)
UNE-EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers (Endorsed by AENOR in February of 2015.)
UNE-EN 451-2:2019 Method of testing fly ash - Part 2: Determination of fineness by wet sieving

AT-ON, Roundness Sieve

ONORM M 1157-3-1994 Testing methods for foundry sands - Determination of grain size distribution (sieve grading)
OENORM EN 933-1-2021 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

Standard Association of Australia （SAA）, Roundness Sieve

AS 1141.11.1:2009/Amdt 1:2011
AS 1141.11:1996 Methods for sampling and testing aggregates - Particle size distribution by sieving
AS 1141.11.1:2009 Methods for sampling and testing aggregates Method 11.1: Particle size distribution—Sieving method
AS 1141.11.1:2020 Methods for sampling and testing aggregates, Method 11.1: Particle size distribution — Sieving method
AS ISO 8598.1:2017 Optics and optical instruments — Focimeters, Part 1: General purpose instruments

未注明发布机构, Roundness Sieve

BS ISO 13765-5:2005 Refractory mortars — Part 5 : Determination of grain size distribution (sieve analysis)
BS EN 16424:2014(2015) Characterization of waste — Screening methods for the element composition by portable X - ray fluorescence instruments
DIN EN 933-1:1997 Test for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Granulometric analysis, Sieving method
NF P18-622-1*NF EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1 : determination of particle size distribution - Sieving method.
BS 812-103.1:1985(1998) Testing aggregates — Part 103 : Methods for determination of particle size distribution — Section 103.1 Sieve tests
BS EN 1015-1:1999(2007) Methods of test for mortar for masonry — Part 1 : Determination of particle size distribution (by sieve analysis)
BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement

Professional Standard - Ferrous Metallurgy, Roundness Sieve

YB/T 4392.3-2014 Sulphat titanium slag.Determination of particle size.Mechanical sieving method

Professional Standard - Petroleum, Roundness Sieve

SY/T 6542-2003 Core particle sizer
SY/T 6582.3-2003 The calibration for petroleum nuclear logging tool Part 3:The calibration for compensated density/litho-density tool
SY/T 6582.2-2003 The calibration for petroleum nuclear logging tool Part 2:The calibration for natural gamma-ray logging tool
SY/T 6582.4-2003 The calibration for petroleum nuclear logging tool Part 4:The calibration for compensated neutron tool

Professional Standard - Chemical Industry, Roundness Sieve

HG/T 5335～5339-2018 Determination method of molecular sieve adsorption temperature rise, determination method of molecular sieve dusting degree, lithium low-silicon X-type molecular sieve, molecular sieve adsorbent for decarboxylation and stable isotope 15N-labeled melamine

European Committee for Standardization (CEN), Roundness Sieve

EN ISO 8130-1:2010 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
EN 12948:2010 Liming materials - Determination of size distribution by dry and wet sieving
prEN 933-1-2021 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
PD CEN/TR 15149-3:2014 Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method
CEN ISO/TS 12181-1:2007 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
EN 15149-1:2010 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
EN 15149-2:2010 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
EN 451-2:1994 Method of Testing Fly Ash - Part 2: Determination of Fineness by Wet Sieving
EN ISO 8429:1996 Optics and Optical Instruments - Opthamology - Graduated Dial Scale
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3@15 mm and below

Defense Logistics Agency, Roundness Sieve

DLA A-A-50767 VALID NOTICE 3-2006 ANALYZER, SURFACE FINISH
DLA A-A-50767 VALID NOTICE 2-2001 ANALYZER, SURFACE FINISH
DLA A-A-50767 VALID NOTICE 1-1995 ANALYZER, SURFACE FINISH
DLA A-A-50767-1983 ANALYZER, SURFACE FINISH

CENELEC - European Committee for Electrotechnical Standardization, Roundness Sieve

EN 61207-6:1994 Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers

Lithuanian Standards Office , Roundness Sieve

LST EN 15149-2-2011 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
LST EN 15149-1-2011 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
LST EN 12948-2011 Liming materials - Determination of size distribution by dry and wet sieving
LST EN 80601-2-59-2010 Medical electrical equipment -- Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening (IEC 80601-2-59:2008 + corrigendum 2009)
LST EN 451-2-2000 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
LST EN ISO 8130-1:2011 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
LST EN 933-1-2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
LST EN ISO 12181-1:2011 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
LST EN 61207-6-2001 Expression of performance of gas analyzers. Part 6: Photometric analyzers (IEC 61207-6:1994)

PL-PKN, Roundness Sieve

PN Z04097 Arkusz 07-1974 Air purity protection Tests for size composition of dust Sieve analysis
PN P50146-1972 Fiber length of pulp by screen classificatiom lor paper industry products
PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)

AENOR, Roundness Sieve

UNE-EN 12948:2011 Liming materials - Determination of size distribution by dry and wet sieving
UNE 34232:1981 SODIUM CHLORIDE USED AS TABLE SALT. DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY MECHANICAL SIEVING.
UNE 80108:2010 Test Methods of cement: Physical analysis. Fineness determination by wet sieving.
UNE-EN 451-2:1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
UNE-EN ISO 8130-1:2011 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
UNE-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
UNE-CEN/TR 15149-3:2015 IN Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method
UNE-EN ISO 12181-1:2012 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
UNE-EN 1015-1:1999 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (BY SIEVE ANALYSIS)

American National Standards Institute （ANSI), Roundness Sieve

ANSI/ASAE S319.4-2008 Method of Determining and Expressing Fineness of Feed Materials by Sieving

Association of German Mechanical Engineers, Roundness Sieve

VDI/VDE 2615-2006 Surface roughness measurement of cylindrical gears and bevel gears by means on stylus-type instruments

Professional Standard-Ships, Roundness Sieve

CB/T 336-2002 Marine light-weright three fulcrum bar graduator

Professional Standard - Speciality, Roundness Sieve

ZB U65002-1990 Marine light three-bar indexer

TR-TSE, Roundness Sieve

TS 1945-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — PARTICLE S?ZE ANALYSIS — SIEVING METHOD

Military Standard of the People's Republic of China-General Armament Department, Roundness Sieve

GJB 771.106-1991 Test methods for gunpowder performance. Screening method for determination of propellant particle size distribution.
GJB/J 3606-1999 Modulation analyzer calibration procedures
GJB 8683.6-2015 Test methods for physical parameters of pyrotechnics Part 6: Particle size determination and screening method

Professional Standard - Commodity Inspection, Roundness Sieve

SN/T 1138-2002 Dry sieving test method for particle size composition of metal powders for import and export

Canadian Standards Association (CSA), Roundness Sieve

CAN/CSA-C22.2 NO.80601-2-59-2010 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening (First Edition; Incorporates Corrigendum 1: June 2011)
CAN/CSA-ISO/TR 13154:2014 Medical electrical equipment - Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph (First Edition)

AT-OVE/ON, Roundness Sieve

OVE EN IEC 80601-2-59/A1:2021 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening (IEC 62D/1892/CDV) (Amendment) (english version)

IN-BIS, Roundness Sieve

IS 11885-1987

Professional Standard - Energy, Roundness Sieve

NB/SH/T 6024-2021 Determination of Relative Crystallinity of ZSM-5 Molecular Sieve X-ray Diffraction Method

Professional Standard - Non-ferrous Metal, Roundness Sieve

YS/T 438.1-2001 Methods for physical performance determination of sandy alumina.Determination of size distribution.Sieving method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Roundness Sieve

GJB 5382.6-2005 Test methods of physical parameter for pyrotechnic. Part 6: Determination of particle size. Sieve method

IT-UNI, Roundness Sieve

UNI 5564-1965