ZH
RU
ES

Thermogravimetric and Enthalpy Tests

Thermogravimetric and Enthalpy Tests, Total:318 items.

In the international standard classification, Thermogravimetric and Enthalpy Tests involves: Thermodynamics and temperature measurements, Plastics, METALLURGY, Iron and steel products, Analytical chemistry, Test conditions and procedures in general, Solar energy engineering, Leather technology, Environmental protection, Refractories, Veterinary medicine, Road vehicle systems, GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION, Surface treatment and coating, Non-ferrous metals, Dentistry, Construction materials, Installations in buildings, Raw materials for rubber and plastics, Corrosion of metals, Energy and heat transfer engineering in general, Burners. Boilers, Vocabularies, Insulating materials, Agricultural machines, implements and equipment, Physics. Chemistry, Protection of and in buildings, Heat pumps, Technical product documentation, Medical equipment, Ventilators. Fans. Air-conditioners, Internal combustion engines for road vehicles, Non-destructive testing, Kitchen equipment, Electronic tubes, Rubber, Metalliferous minerals, Pipeline components and pipelines, Power stations in general, Materials for the reinforcement of composites, Lubricants, industrial oils and related products, Welding, brazing and soldering, Road engineering, Production of metals, Continuous handling equipment, Protective equipment, Electrical equipment for working in special conditions, Optical equipment, Sterilization and disinfection, Pumps, Protection against fire, Pesticides and other agrochemicals, Ceramics, CHEMICAL TECHNOLOGY, Crude petroleum, Coals, Industrial furnaces, Hydraulic fluids, Radiation measurements, Petroleum products in general, Structures of buildings, Electromechanical components for electronic and telecommunications equipment.

American Society for Testing and Materials (ASTM), Thermogravimetric and Enthalpy Tests

ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E637-05(2016) Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2008-17 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM D2288-97 Standard Test Method for Weight Loss of Plasticizers on Heating
ASTM D228-08 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
ASTM D2288-97(2001) Standard Test Method for Weight Loss of Plasticizers on Heating
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1868-10(2021) Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM E2008-17(2021) Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM F2625-10 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM E1868-97 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E2008-07 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E1868-09 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-10(2015) Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM E637-98 Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E637-22 Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1868-02 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-04 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E637-05 Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E637-05(2011) Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM A630-98 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM C1607-06 Standard Test Method for Determination of "Microwave Safe for Reheating" for Ceramicware
ASTM A630-03(2014) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM A630-16 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D8474-23 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM E2965-15 Standard Test Method for Determination of Low Levels Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2965-16 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM C1607-12 Standard Test Method for Determination of ldquo;Microwave Safe for Reheatingrdquo; for Ceramicware
ASTM E207-00 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials By Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM E2403-06(2018) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2958-14 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM E2403-23 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM D6559-00A(2016)e1 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D6559-00a(2005) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6559-00a(2010) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM E2958-19 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM E1641-23 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM C1616-07e1 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM C1616-07 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM E295-82(2000) Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E2958-21 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM C884/C884M-23 Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
ASTM D2444-99 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2043-99(2021) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99(2017) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D6558-22 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM D6559-22 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2043-99(2012) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM E2043-99(2006) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D7582-09 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E2043-99 Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D6558-00A(2015)e1 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM F3058-16(2021) Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
ASTM F2331-11(2016) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermogravimetric and Enthalpy Tests

GB/T 33957-2017 Methods of determination and calculation of heat balance in heat treatment furnace
GB/T 33956-2017 Methods of determination and calculation of heat balance in continuous reheating furnace for steel rolling
GB/T 34476-2017 Methods of determination and calculation of heat balance in converter
GB/T 33962-2017 Methods of determination and calculation of heat balance in coke oven
GB/T 34473-2017 Methods of determination and calculation of heat balance for sintering machine
GB/T 34916-2017 Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis
GB/T 34191-2017 Methods of determination and calculation of heat balance in straight grate process for pellet firing of iron and steel industry
GB/T 31984-2015 Test method for determining the content of vinyl acetate in ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA)

CZ-CSN, Thermogravimetric and Enthalpy Tests

CSN 25 0405-1961 Testing and calibration of thermocouples.
CSN 26 9347-1982 Thermal freight containers — specification and testing.
CSN ISO 7459:1992 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
CSN ISO 718:1993 Laboratory glassware - Thermal shock and thermal shock endurance - Test methods
CSN 03 8332-1993 Corrosion protection. Testing of tape coatings and heat shrinkable materials
CSN 06 1912-1989 Gas appliances for catering plants. Bains-marie. Hot cupboards. Warm tables. Technical requirements. Tes-ting

Natural Gas Processor's Association (NGPA), Thermogravimetric and Enthalpy Tests

GPA RR-12-1975 Enthalpy and Phase Boundry Measurements on Carbon Dioxide and Mixtures of Carbon Dioxide with Methane, Ethane, and Hydrogen Sulfide

Professional Standard - Non-ferrous Metal, Thermogravimetric and Enthalpy Tests

YS/T 118.7-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (submerged heat smelting electric furnace)
YS/T 118.6-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (fuming furnace)
YS/T 118.16-2012 Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals (Copper flash smelting furnace)
YS/T 118.17-2012 Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals (Nickel flash smelting furnace)
YS/T 118.15-2012 Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals (Converter)
YS/T 118.15-1992 Determination and Calculation Method of Heat Balance of Heavy Nonferrous Metallurgy Furnace (Blowing Converter)
YS/T 121.7-1992 Heat Balance Test and Calculation Method of Resistance Soaking Furnace in Non-ferrous Metal Processing Enterprises
YS/T 118.11-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (vertical distillation furnace)
YS/T 118.1-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (fluidized roasting furnace)
YS/T 118.14-1992 Heat balance measurement and calculation method for heavy non-ferrous metallurgical furnaces (briquette coking furnace)
YS/T 118.2-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (multi-chamber roasting furnace)
YS/T 118.3-1992 Determination and Calculation Method of Heat Balance of Heavy Nonferrous Metallurgy Furnaces (Volatilization Rotary Kiln)
YS/T 118.4-1992 Determination and Calculation Method of Heat Balance of Heavy Nonferrous Metallurgy Furnace (Dry Rotary Kiln)
YS/T 118.5-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (segregation rotary kiln)
YS/T 118.9-1992 Determination and Calculation Method of Heat Balance of Heavy Nonferrous Metallurgy Furnace (Copper Refining Reverberatory Furnace)
YS/T 118.10-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (copper smelting reverberatory furnace)
YS/T 118.12-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (tower zinc rectification furnace)
YS/T 121.5-1992 Heat Balance Test and Calculation Method for Ingot Induction Heating Furnace in Non-ferrous Metal Processing Enterprises
YS/T 118.8-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (copper and lead smelting blast furnace)
YS/T 118.13-1992 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnace (lead-zinc closed blast furnace)
YS/T 121.10-1992 Heat Balance Test and Calculation Method of Cemented Carbide Resistance Heating Furnace in Non-ferrous Metal Processing Enterprises
YS/T 121.4-1992 Heat balance test and calculation method of flame heating furnace and annealing furnace in non-ferrous metal processing enterprises
YS/T 121.6-1992 Heat Balance Test and Calculation Method of Push-type Air Circulation Resistance Heating Furnace in Non-ferrous Metal Processing Enterprises
YS/T 121.8-1992 Non-ferrous metal processing enterprises resistance annealing heat balance test and calculation method
YS/T 121.2-1992 Heat Balance Test and Calculation Method of Resistance Melting Furnace in Non-ferrous Metal Processing Enterprises
YS/T 121.3-1992 Heat Balance Test and Calculation Method of Induction Melting Furnace in Non-ferrous Metal Processing Enterprises
YS/T 121.9-1992 Heat Balance Test and Calculation Method of Vacuum Electric Arc Furnace in Non-ferrous Metal Processing Enterprises
YS/T 121.1-1992 Heat Balance Test and Calculation Method of Flame Reflective Melting Furnace in Non-ferrous Metal Processing Enterprises

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermogravimetric and Enthalpy Tests

ASHRAE 4708-2004 Calibration and Testing of Thermal Simulation Models of Air Heaters
ASHRAE CH-93-7-1993 Modeling and Testing of Thermal Performance of Fenestration Components
ASHRAE HI-02-8-2-2002 Field Test Comparison of Hot Water Recirculation Loop vs. Point-of-Use Water Heaters in a High School
ASHRAE SF-98-19-1-1998 Relevance of Existing Heat Pump Testing and Rating Method Assumptions to Residential Gas Engine Heat Pumps (RP-780)
ASHRAE 4577-2002 Design and Testing of a Garment for Measuring Sensible Heat Transfer Between the Human Body and Its Environment

中国有色金属工业总公司, Thermogravimetric and Enthalpy Tests

YS/T 118-1992 Measurement and calculation methods for heat balance of heavy non-ferrous metals and furnaces

Japanese Industrial Standards Committee (JISC), Thermogravimetric and Enthalpy Tests

JIS K 7120:1987 Testing methods of plastics by thermogravimetry
JIS W 1201:1986 Control and test requirements for thermal treatment and pyrometric equipments for aerospace use

Association Francaise de Normalisation, Thermogravimetric and Enthalpy Tests

NF P85-701:2022 Produits pour joints - Essais d'identification - Analyse thermogravimétrique
NF EN 15648:2009 Projection thermique - Épreuve de qualification d'un mode opératoire relative à élément
NF EN 60695-10-2:2014 Essais relatifs aux risques du feu - Partie 10-2 : chaleurs anormales - Essai à la bille
NF EN 60695-8-2:2017 Essais relatifs aux risques du feu - Partie 8-2 : dégagement de chaleur - Résumé et pertinence des méthodes d'essais
NF EN 60512-20-3:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 20-3 : essais relatifs aux risques du feu - Essais 20c : inflammabilité, fil incandescent
NF EN ISO 17652-3:2003 Soudage - Essai sur peintures primaires en relation avec le soudage et les techniques connexes - Partie 3 : coupage thermique
NF B41-210-2*NF EN 820-2:2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2 : determination of self-loaded deformation
NF EN 60695-10-3:2016 Essais relatifs aux risques du feu - Partie 10-3 : chaleur anormale - Essai de déformation par réduction des contraintes de moulage
NF C26-935:1965 Méthodes d'essai des vernis isolants - Vernis d'imprégnation en couche épaisse - Évaluation des caractéristiques d'état liées au traitement thermique.
NF EN 13880-9:2003 Produits de scellement de joints appliqués à chaud - Partie 9 : méthode d'essai pour la détermination de la compatibilité avec les revêtements bitumineux
NF EN 820-2:2003 Céramiques techniques avancées - Méthodes d'essai pour céramiques monolithiques - Propriétés thermo-mécaniques - Partie 2 : détermination de la déformation sous son propre poids

GB-REG, Thermogravimetric and Enthalpy Tests

REG NASA-LLIS-0781-2000 Lessons Learned - Thermal-Vacuum Versus Thermal-Atmospheric Tests of Electronic Assemblies

Indonesia Standards, Thermogravimetric and Enthalpy Tests

SNI 07-0322-1989 Hot rolled strip steel, Specification and test method
SNI 06-0464-1989 Heat resistance sole leather, Specification and test method
SNI 09-2772-1992 Brake lining and pads, Test method for thermal expansion
SNI 07-0070-1987 Hot rerolled equilateral rectangles steel with round edge, Specification and test method
SNI 07-1337-1989 Heat resistance steel and alloy steel at high temperature, Tensile test method
SNI 19-6713-2002 Air conditioning and heat pumps without - channels - Testing and performance assesment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermogravimetric and Enthalpy Tests

GB/T 31229-2014 Test method for volatility rate by thermogravimetry
GB/T 32974-2016 Methods of determination and calculation of heat balance in regenerative furnace of iron and steel industry
GB/T 42259-2022 Metallic and other inorganic coatings—Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
GB/T 32971-2016 Methods of determination and calculation of heat balance in regenerative burner for ladle preheating system of iron and steel industry
GB/T 8174-2008 Method of measuring and evaluation thermal insulation effects for equipments and pipes
GB/T 26550-2011 Testing and appraising of similitude thermal efficiency for grain dryer
GB/T 28638-2023 Heat loss test and thermal insulation effect evaluation method of thermal insulation structure of urban heating pipelines
GB/T 28638-2012 Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes
GB/T 23651-2009 Rubber,vulcanized or thermoplastic.Hardness testing.Introduction and guide
GB/T 2407-2008 Plastics.Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
GB/T 32956-2016 Methods of determination and calculation of heat balance in grate-kiln process forpellet firing system of iron and steel industry

HU-MSZT, Thermogravimetric and Enthalpy Tests

MSZ 8888/3-1971

国家市场监督管理总局、中国国家标准化管理委员会, Thermogravimetric and Enthalpy Tests

GB/T 40858-2021 General requirements and test methods for receivers of solar thermal power plants
GB/T 37428-2019 Methods of determination and calculation of thermal balance in electric arc furnace

Professional Standard - Textile, Thermogravimetric and Enthalpy Tests

FZ/T 07008-2020 Heat balance test and calculation method of setting machine

Professional Standard - Special Equipment Specification, Thermogravimetric and Enthalpy Tests

TSG R0010-2019 Heat exchanger energy efficiency test and evaluation rules

SE-SIS, Thermogravimetric and Enthalpy Tests

SIS SS IEC 779:1989 Industrial electroheating installations — Test methods for e/ectro-slag remelting furnaces

PL-PKN, Thermogravimetric and Enthalpy Tests

PN C04302-1989 Coke of hard coal Thermogravimetric method of combustibility determina.tion

Korean Agency for Technology and Standards (KATS), Thermogravimetric and Enthalpy Tests

KS L 3304-2012(2017) Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-1964 Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-1987 Testing method for specific gravity and true porosity of insulating fire bricks
KS B ISO 13256-2-2014(2019) Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps
KS B ISO 15042:2006 Multiple split-system air-conditioners and air-to-air heat pumps－Testing and rating for performance
KS M ISO 20823-2004(2019) Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test
KS M ISO 13846:2012 Plastics piping systems-End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping-Test method for long-term leaktightness under internal water pressure
KS M ISO 20823:2004 Petroleum and related products－Determination of the flammability characteristics of fluids in contact with hot surfaces－Manifold ignition test

Professional Standard - Ferrous Metallurgy, Thermogravimetric and Enthalpy Tests

YB/T 4313-2012 Methods of determination and calculation of heat balance in regenerative furnace of iron and steel industry
YB/T 4484-2015 Methods of determination and calculation of heat balance in regenerative burner for ladle preheating system of iron and steel industry
YB/T 4309-2015 Methods of determination and calculation of heat balance in grate-kiln process forpellet firing system of iron and steel industry

Shandong Provincial Standard of the People's Republic of China, Thermogravimetric and Enthalpy Tests

DB37/T 4362-2021 Double Fluorescent RT-PCR Detection Method of Influenza Virus and Canine Distemper Virus

未注明发布机构, Thermogravimetric and Enthalpy Tests

Shanghai Provincial Standard of the People's Republic of China, Thermogravimetric and Enthalpy Tests

DB31/T 34-2020 General Rules for Testing and Calculating Heat Balance of Industrial Furnaces

工业和信息化部, Thermogravimetric and Enthalpy Tests

YS/T 1176-2017 Measurement and calculation method of heat balance of heavy non-ferrous metallurgical furnaces (copper bottom-blown furnace)
YB/T 4918-2021 Thermal balance test and calculation method of dry quenching system
YS/T 1291-2018 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnaces (oxygen-rich side-blown bath melting furnace)

European Committee for Standardization (CEN), Thermogravimetric and Enthalpy Tests

EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
EN 12269-1:2000 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test
EN 13880-8:2003 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

Professional Standard - Urban Construction, Thermogravimetric and Enthalpy Tests

CJ/T140-2001 Methods measuring and evaluating heat loss and thermal insulation efficiency for thermal insulation construction of heating pipeline
CJ/T 140-2001 Methods measuring and evaluating heat loss and thermal insulation efficiency for thermal insulation construction of heating pipeline

American National Standards Institute （ANSI), Thermogravimetric and Enthalpy Tests

ANSI/ASTM D2288:2001 Test Method for Weight Loss of Plasticizers on Heating (X-15-373-1) (08.02)
ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)

Canadian Standards Association (CSA), Thermogravimetric and Enthalpy Tests

CSA CGA P.6-1993-1993 Testing Method for Measuring Thermal and Operating Efficiencies of Gas-Fired Pool Heaters First Edition

AT-ON, Thermogravimetric and Enthalpy Tests

ONORM EN 215 Teil.1-1988 Thermostatic radiator valves; requirements and fest methods
ONORM M 7540-1-1994 Atomizing oil burners of monobloc type for the heating fuels "fuel oil light", "fuel oil medium" and 'iuel oil heavy" - Terminology, requirements, testing, marking of conformity

Shaanxi Provincial Standard of the People's Republic of China, Thermogravimetric and Enthalpy Tests

DB61/T 544-2012 Energy Efficiency Testing and Evaluation of Industrial Heat Exchange Pressure Vessels

Gansu Provincial Standard of the People's Republic of China, Thermogravimetric and Enthalpy Tests

DB62/T 2248-2022 Energy Efficiency Test and Evaluation Method for Industrial Heat Exchangers

Group Standards of the People's Republic of China, Thermogravimetric and Enthalpy Tests

T/CSEE 0073-2018 Thermogravimetric test and evaluation method of combustion performance of power coal
T/CPCIF 0181-2022 Measurement and calculation methods for quantity of surplus heat resources in chemical enterprise

Professional Standard - Petroleum, Thermogravimetric and Enthalpy Tests

SY/T 6767-2016 Measuring and calculating specification for quantity of waste heat resources in petroleum enterprise
SY/T 6767-2009 Measuring and calculating criterion for quantity of waste heat resources in petroleum enterprise

Hubei Provincial Standard of the People's Republic of China, Thermogravimetric and Enthalpy Tests

DB42/T 2049-2023 Energy efficiency grades and test rules for rolling continuous heating furnaces

British Standards Institution (BSI), Thermogravimetric and Enthalpy Tests

BS PD CEN/TR 15131:2006 Thermal performance of building materials — The use of interpolating equations in relation to thermal measurement on thick specimens — Guarded hot plate and heat flow meter apparatus
BS ISO 18251-2:2023 Non-destructive testing. Infrared thermography - Test method for integrated performance of system and equipment
BS EN 13880-9:2003 Hot applied joint sealants - Test method for the determination of compatibility with asphalt pavements
BS ISO 9022-23:2023 Tracked Changes. Optics and photonics. Environmental test methods. Low pressure combined with cold, ambient temperature and dry or damp heat
BS EN ISO 7623:2022 Tracked Changes. Steel cord conveyor belts. Cord-to-coating bond test. Initial test and after thermal treatment
22/30448672 DC BS EN ISO 7623. Steel cord conveyor belts. Cord-to-coating bond test. Initial test and after thermal treatment
BS EN 820-2:2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Determination of self-loaded deformation
PD IEC/TR 60216-7-2:2016 Electrical insulating materials. Thermal endurance properties. Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data
BS 1902-5.14:1992 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (temperatures up to 1500 °C) (methods 1902-5.14)
BS 1902 Sec.5.14:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (temperatures up to 1500C) (methods 1902-5.14)
18/30371883 DC BS EN 14500. Blinds and shutters. Thermal and visual comfort. Test and calculation methods
BS EN 13880-11:2003 Hot applied joint sealants - Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements
BS EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
BS EN 13880-8:2003 Hot applied joint sealants - Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

RU-GOST R, Thermogravimetric and Enthalpy Tests

GOST R 51148-1998 Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical analyses, tests for sterility and pyrogenicity
GOST R 53832-2010 Vehicles. Heat exchangers and thermostats. Technical requirements and test methods
GOST R 51894-2002 Aerosol devices with pyromechanical bottles. Safety requirements and safety test methods
GOST R IEC 60079-30-1-2009 Explosive atmospheres. Electrical resistance trace heating. Part 30-1. General technical requirements and test methods
GOST R ISO 15883-2-2009 Washer-disinfectors. Part 2. Requirements and test methods for washerdisinfectors employing thermal disinfection
GOST R IEC 1066-1993 Thermoluminescene dosimetry systems for personal and environmental monitoring. General technical requirements and test methods
GOST R IEC 60811-1-2-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods

ES-UNE, Thermogravimetric and Enthalpy Tests

UNE-EN IEC 60779:2020 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces (Endorsed by Asociación Española de Normalización in September of 2020.)
UNE-EN 1183:1997 MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR THERMAL SHOCK AND THERMAL SHOCK ENDURANCE (Endorsed by AENOR in August of 1997.)
UNE-EN ISO 7623:2022 Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2022) (Endorsed by Asociación Española de Normalización in January of 2023.)

German Institute for Standardization, Thermogravimetric and Enthalpy Tests

DIN ISO 718:1993-02 Laboratory glassware; thermal shock and thermal shock endurance; test methods; identical with ISO 718:1990
DIN EN ISO 7623:2023-02 Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2022); German version EN ISO 7623:2022
DIN EN ISO 7623:2023 Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2022)
DIN EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements; German version EN 13880-9:2003
DIN EN ISO 20823:2003-10 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003); German version EN ISO 20823:2003
DIN EN 62359:2018-09 Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields (IEC 62359:2010 + Cor.:2011 + A1:2017); German version EN 62359:2011 + A1:2018 / Note: DIN EN 62...
DIN EN 13880-9:2003-09 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements; German version EN 13880-9:2003
DIN EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003); German version EN ISO 20823:2003
DIN EN 820-2:2003 Advanced technical ceramics - Methods of test for monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation; German version EN 820-2:2003
DIN EN 13880-8:2003 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion; German version EN 13880-8:2003
DIN 51045-5:2007-01 Determination of linear change of solids by thermal effect using the dilatometer method - Part 5: Testing of non-fired heavy ceramic materials
DIN 51045-4:2007-01 Determination of linear change of solids by thermal effect using the dilatometer method - Part 4: Testing of fired heavy ceramic materials

SAE - SAE International, Thermogravimetric and Enthalpy Tests

SAE AS6171/10-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Thermogravimetric Analysis (TGA) Test Methods

Society of Automotive Engineers (SAE), Thermogravimetric and Enthalpy Tests

SAE AS6171/10-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Thermogravimetric Analysis (TGA) Test Methods

The American Road & Transportation Builders Association, Thermogravimetric and Enthalpy Tests

AASHTO T 209-2010 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
AASHTO T 209-2011 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
AASHTO T 209-2012 Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA)
AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method

AASHTO - American Association of State Highway and Transportation Officials, Thermogravimetric and Enthalpy Tests

T 209-2009 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2008 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2011 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2010 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)
T 209-2012 Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA)
T 209-2005 Standard Method of Test for Theoretical Maximum Specific Gravity and Density of Hot-Mix Asphalt Paving Mixtures
T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method

Professional Standard - Electron, Thermogravimetric and Enthalpy Tests

SJ 446-1973 Methods of measurement for tube voltage drop and tube voltage drop on underheated condition of high-voltage rectifier tubes
SJ 444-1973 Methods of measurement for anode current and anode current on underheated condition of high-voltage rectifier tubes
SJ 447-1973 Methods of measurement for pulse tube voltage drop and pulse tube voltage drop on underheated condition of high-voltage rectifier tubes

GOSTR, Thermogravimetric and Enthalpy Tests

GOST IEC 60811-3-2-2011 Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Loss of mass test. Thermal stability test

Professional Standard - Electricity, Thermogravimetric and Enthalpy Tests

DL/T 934-2005 The rule for measuring and evaluating thermal insulation of thermal power plant

(U.S.) Ford Automotive Standards, Thermogravimetric and Enthalpy Tests

FORD WSS-M97B56-A1-2012 INHIBITOR, ENGINE HOT TEST FLUID ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M97B56-A1-2013 INHIBITOR, ENGINE HOT TEST FLUID ***TO BE USED WITH FORD WSS-M99P1111-A***

IT-UNI, Thermogravimetric and Enthalpy Tests

UNI 5639-1965

International Organization for Standardization (ISO), Thermogravimetric and Enthalpy Tests

ISO 15042:2011 Multiple split-system air-conditioners and air-to-air heat pumps - Testing and rating for performance
ISO 15042:2017 Multiple split-system air conditioners and air-to-air heat pumps - Testing and rating for performance
ISO/CD 3957:2011 Reaction to fire tests — Façades — Measurement of heat and smoke generation in severe exterior fire scenarios
ISO 181:1981 Plastics; Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
ISO 6964:1986 Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification
ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test

Association of German Mechanical Engineers, Thermogravimetric and Enthalpy Tests

DVS 2212-1-2006 "Qualification testing of plastics welders - Qualification test groups I and II - Hot gas welding with the torch separate from the filler rod (WF), high-speed hot gas welding (WZ), heated toolbutt welding (HS), sleeve welding with an incorporated electric

Lithuanian Standards Office , Thermogravimetric and Enthalpy Tests

LST EN ISO 7623:2002 Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996)
LST EN 13880-9-2004 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

RO-ASRO, Thermogravimetric and Enthalpy Tests

STAS SR ISO 6964:1995 Poiyoiefin pipes and fittings - Determination of carbon black by calclnatlon and pyrolysis - Test method and basic spec?fication

CH-SNV, Thermogravimetric and Enthalpy Tests

VSM 37252-1963

Danish Standards Foundation, Thermogravimetric and Enthalpy Tests

DS/EN ISO 17652-3:2003 Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting
DS/EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
DS/ENV 820-2:1993 Advanced technical ceramics. Methods of test for monolithic ceramics. Thermo-mechanical properties. Part 2: Determination of selfloaded deformation

AENOR, Thermogravimetric and Enthalpy Tests

UNE-EN 13880-9:2004 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

Taiwan Provincial Standard of the People's Republic of China, Thermogravimetric and Enthalpy Tests

CNS 15125-2-2007 Solar heating - Domestic water heating systems - Part 2 : Outdoor test methods for system performance characterization and yearly performance prediction of solar-only systems

AT-OVE/ON, Thermogravimetric and Enthalpy Tests

OVE EN IEC 60779:2021 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces (( IEC 60779:2020) EN IEC 60779:2020) (german version)

CENELEC - European Committee for Electrotechnical Standardization, Thermogravimetric and Enthalpy Tests

EN 62359:2005 Ultrasonics – Field characterization – Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Thermogravimetric and Enthalpy Tests

IPC TR-486-2001 Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress/Microsectioning Evaluations for Detecting the Presence of Inner-Layer Seperations

CEN - European Committee for Standardization, Thermogravimetric and Enthalpy Tests

EN 13880-8:2018 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion