ZH
RU
ES
Plastic Ball Test
Plastic Ball Test, Total:497 items.
In the international standard classification, Plastic Ball Test involves: Insulating fluids, Valves, Plastics, Rubber and plastics products, Fishing and fish breeding, Sports equipment and facilities, Wastes, Welding, brazing and soldering, Aircraft and space vehicles in general, Textile machinery, Reinforced plastics, Leather technology, Installations in buildings, Products of the textile industry, Mechanical testing, Raw materials for rubber and plastics, Fuels, Cases. Boxes. Crates, Road vehicle systems, Pipeline components and pipelines, Construction materials, Equipment for entertainment, Protection against fire, Rubber.
Korean Agency for Technology and Standards (KATS), Plastic Ball Test
RO-ASRO, Plastic Ball Test
Professional Standard - Petroleum, Plastic Ball Test
CH-SNV, Plastic Ball Test
ZA-SANS, Plastic Ball Test
British Standards Institution (BSI), Plastic Ball Test
- BS EN ISO 2039-1:2003 Plastics - Determination of hardness - Ball indentation method
- 22/30449570 DC Plastics. Test specimens
- BS EN ISO 12058-1:1997 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
- BS EN ISO 12058-1:2002 Plastics - 12058-1:2002)
Determination of
viscosity using a
falling-ball
viscometer -
Part 1: Inclined-tube method
- BS EN ISO 12058-1:2018 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
- BS ISO 20819-2:2023 Plastics. Wood-plastic recycled composites (WPRC) - Test methods
- BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
- BS PD CEN/TS 16010:2020 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
- BS EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastic materials
- BS EN ISO 16135:2006+A1:2019 Industrial valves. Ball valves of thermoplastics materials
- BS 2782-10 Method 1003:1977 Methods of testing plastics. Glass reinforced plastics. Determination of tensile properties
- BS EN 28233:1992 Thermoplastics valves. Torque. Test method
- BS 2782-10 Method 1004:1977 Methods of testing plastics. Glass reinforced plastics. Standard atmospheres for conditioning and testing
- BS EN 12332-1:1999 Rubber- or plastics-coated fabrics - Determination of bursting strength - Steel ball method
- BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
- BS EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials
- BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
- BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
- BS EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS ISO 3303-1:2012 Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel-ball method
- BS EN ISO 3303-1:2020 Rubber- or plastics-coated fabrics. Determination of bursting strength - Steel-ball method
- BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
- BS EN ISO 20753:2018 Tracked Changes. Plastics. Test specimens
- BS EN ISO 527-2:2012 Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics
- BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
- BS EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS ISO 23559:2011 Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
- 22/30427258 DC BS ISO 5430. Plastics. Marine ecotoxicity testing scheme for biodegradable plastic materials. Test methods and requirements
- BS EN ISO 1163-2:2000 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS EN ISO 1163-2:1996 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
- BS ISO 20753:2008 Plastics - Test specimens
- BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
- 22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
- BS EN ISO 16012:2015 Plastics. Determination of linear dimensions of test specimens
- BS EN ISO 21970-2:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
- BS EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Preparation of test specimens and determination of properties
国家市场监督管理总局、中国国家标准化管理委员会, Plastic Ball Test
RU-GOST R, Plastic Ball Test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic Ball Test
- GB/T 3398-1982 Test for hardness of plastics by the ball indentation
- GB/T 14485-1993 Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball (falling ball)
- GB/T 3398.1-2008 Plastics.Determination of hardness.Part 1:Ball indentation method
- GB/T 12598-2023 Determination of the ball rate of plastic ion exchange resin after grinding and the ball rate after grinding
- GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
- GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
- GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
- GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
- GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics
- GB/T 32683.1-2016 Plastics.Determination of viscosity using a falling-ball viscometer.Part 1: Inclined-tube method
- GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
HU-MSZT, Plastic Ball Test
Professional Standard - Aquaculture, Plastic Ball Test
Professional Standard - Agriculture, Plastic Ball Test
Indonesia Standards, Plastic Ball Test
Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Plastic Ball Test
MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Plastic Ball Test
IL-SII, Plastic Ball Test
CZ-CSN, Plastic Ball Test
CEN - European Committee for Standardization, Plastic Ball Test
- EN ISO 2039-1:1996 Plastics - Determination of Hardness - Part 1: Ball Indentation Method
- EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- EN ISO 20753:2018 Plastics - Test specimens
International Organization for Standardization (ISO), Plastic Ball Test
- ISO 2039-1:2001 Plastics - Determination of hardness - Part 1: Ball indentation method
- ISO 2039-1:1993 Plastics; determination of hardness; part 1: ball indentation method
- ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
- ISO/DIS 20753:2023 Plastics — Test specimens
- ISO/FDIS 20753:2023 Plastics — Test specimens
- ISO 2039:1973 Plastics and ebonite — Determination of hardness by the ball indentation method
- ISO 2039-1:1987 Plastics — Determination of hardness — Part 1: Ball indentation method
- ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
- ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials
- ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials
- ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- ISO/DIS 8233 Thermoplastics valves — Torque — Test method
- ISO 4600:1981 Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
- ISO 4600:1992 Plastics; determination of environmental stress cracking (ESC); ball or pin impression method
- ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
- ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials
- ISO 2039-2:1981 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
- ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
- ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
- ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
- ISO 175:1999 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
- ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
- ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
- ISO 16929:2021 Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
- ISO 16929:2019 Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
- ISO 20753:2008 Plastics - Test specimens
- ISO 20753:2018 Plastics - Test specimens
- ISO 23559:2007 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
- ISO/FDIS 3671:2004 Plastics — Aminoplastic moulding materials — Determination of volatile matter
- ISO 3671:2023 Plastics — Aminoplastic moulding materials — Determination of volatile matter
- ISO 9988-2:2006 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
- ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
- ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
Association Francaise de Normalisation, Plastic Ball Test
German Institute for Standardization, Plastic Ball Test
- DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
- DIN 16726:2017 Plastic sheets - Testing
- DIN EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001); German version EN ISO 2039-1:2003
- DIN EN ISO 20753:2022-07 Plastics - Test specimens (ISO/DIS 20753:2022); German and English version prEN ISO 20753:2022 / Note: Date of issue 2022-06-17*Intended as replacement for DIN EN ISO 20753 (2019-02).
- DIN EN ISO 20753:2019-02 Plastics - Test specimens (ISO 20753:2018); German version EN ISO 20753:2018 / Note: To be replaced by DIN EN ISO 20753 (2022-07).
- DIN 16726:2017-08 Plastic sheets - Testing
- DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
- DIN CEN/TS 16010:2021-04 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
- DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); English version of DIN EN ISO 16138:2006-06
- DIN EN ISO 16135:2019-12 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006 + Amd 1:2019); German version EN ISO 16135:2006 + A1:2019
- DIN 53380-2:2006-11 Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films
- DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
- DIN EN ISO 8233:2023-02 Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023); German and English version prEN ISO 8233:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN 28233 (1991-06).
- DIN EN ISO 2039-1:2003-06 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001); German version EN ISO 2039-1:2003
- DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
- DIN EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); English version of DIN EN ISO 21787:2006-06
- DIN EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); English version of DIN EN ISO 16135:2006-06
- DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
- DIN 53380-3:1998-07 Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
- DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
- DIN 53435:2018-09 Testing of plastics - Bending test and impact test on dynstat test specimens
- DIN 51735:2009 Testing of solid fuels - Determination of plastic properties of coal with the Gieseler Plastometer
- DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
- DIN EN ISO 16929:2021-06 Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2021); German version EN ISO 16929:2021
- DIN EN ISO 8659:2020-07 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020
- DIN EN ISO 21787 Berichtigung 1:2008 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); German version EN ISO 21787:2006, Corrigenda to DIN EN ISO 21787:2006-06
- DIN 53380-4:2006-11 Testing of plastics - Determination of gas transmission rate - Part 4: Carbon dioxide specific infrared absorption method for testing of plastic films and plastic mouldings
- DIN EN ISO 12058-1:2018-11 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018); German version EN ISO 12058-1:2018
- DIN 53380-5:2014-12 Testing of plastics - Determination of gas transmission rate - Part 5: Optical method for plastic films and moulded plastic parts
- DIN 16906:2007 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
- DIN 16906:2015 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
- DIN 53369:1976-02 Testing of plastic films; determination of the shrinking stress
- DIN EN ISO 16012:2016-02 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015); German version EN ISO 16012:2015
- DIN 16781-2:1989 Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties
- DIN EN 28233:1991-06 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990 / Note: To be replaced by DIN EN ISO 8233 (2020-09), DIN EN ISO 8233 (2023-02).
- DIN EN ISO 7214:2012-07 Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012); German version EN ISO 7214:2012
- DIN EN 12814-1:1999-12 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999
- DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
- DIN EN ISO 20200:2016-05 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2015); German version EN ISO 20200:2015 / Note: To be replaced by DIN EN ISO 20200 (2023-01).
Danish Standards Foundation, Plastic Ball Test
- DS/EN ISO 16135:2006 Industrial valves – Ball valves of thermoplastics materials
- DS/EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method
- DS/CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- DS/CEN/TS 16010:2020 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
- DS/EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
- DS/EN ISO 12058-1/AC:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- DS/EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- DS/ISO 10093:2020 Plastics – Fire tests – Standard ignition sources
- DS/EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
AT-ON, Plastic Ball Test
ES-UNE, Plastic Ball Test
- UNE-EN ISO 20753:2019 Plastics - Test specimens (ISO 20753:2018)
- UNE-CEN/TS 16010:2022 EX:2022 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
- UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
- UNE-EN ISO 16929:2022 Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2021)
- UNE-EN ISO 8659:2021 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
- UNE-EN ISO 12058-1:2019 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018)
- UNE-EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
- UNE-EN 12814-2:2022 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
- UNE-EN 12814-1/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
European Committee for Standardization (CEN), Plastic Ball Test
- PD CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- PD CEN/TS 16010:2020 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
- EN ISO 4600:1997 ISO 4600: 1992
- EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
- EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
- EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- EN ISO 16929:2021 Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2021)
- EN ISO 16135:2006 Industrial Valves - Ball Valves of Thermoplastic Materials
- EN ISO 29988-2:2018 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
- EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
- prEN ISO 527-2 rev Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
- EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
- EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
IT-UNI, Plastic Ball Test
GOSTR, Plastic Ball Test
- GOST 9490-1975 Liqvid lubricating and plastic materials. Method of test for lubricating properties on four ball mashine
- GOST 34292-2017 Pipeline valves. Ball valves of thermoplastics materials. General specifications
PT-IPQ, Plastic Ball Test
Association of German Mechanical Engineers, Plastic Ball Test
PL-PKN, Plastic Ball Test
CU-NC, Plastic Ball Test
- NC 30-36-1984 Plastics Determination of Transparent Plastic Materials Refraction Index. Testing Method
- NC 30-63-1987 Plastics. Determination of Plasticizer Migration Testinq Method
- NC 30-71-1988 Plastics Industry. Determination Blocking of Plastic Films Testing Method
- NC 30-43-1985 Plastics. Buttons Testing Methods
- NC 30-68-1988 Plastics Industry. Determination of Coefficients of Static and Dynamic Friction of Plastic Films. Testing Methods
BR-ABNT, Plastic Ball Test
FI-SFS, Plastic Ball Test
Military Standards (MIL-STD), Plastic Ball Test
IN-BIS, Plastic Ball Test
YU-JUS, Plastic Ball Test
- JUS G.S2.526-1984 Plastics and ebonite. Determination of hardness by the ball indentation method
- JUS G.S2.638-1985 Plastics. Hole test on sheets.
- JUS G.S2.605-1980 Plastics Compression moulding test specimens of thermosetting materials
- JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness
- JUS G.S2.608-1980 Plastics. Thermosetting moulding materials. Determination of shrinkage of compression moulded test specimens in the form of bars
Group Standards of the People's Republic of China, Plastic Ball Test
- T/ZZB 1837-2020 Stainless steel ball valves for lining fluoroplastic
- T/CSRA 20-2022 Quantitative analysis method for degradable plastics in plastic composition test
- T/CFA 02010202-1-2017 The fittings of ductile iron for connecting plastic pipes and ductile iron pipes
- T/CFA 02010202-1-2012 The fittings of ductile iron for connecting plastic pipes and ductile iron pipes
- T/CSRA 19-2022 Plastic composition test pretreatment method
- T/CFA 02010202-2-2017 The jointing adaptor of ductile iron for connecting plastic pipes and ductile iron pipes
- T/CFA 02010202-2-2012 The jointing adaptor of ductile iron for connecting plastic pipes and ductile iron pipes
Professional Standard - Textile, Plastic Ball Test
- FZ/T 90080.1-1995 Test method for ball indentation hardness of plastic pick knots for looms
Lithuanian Standards Office , Plastic Ball Test
- LST CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- LST EN 12943-2001 Filler materials for thermoplastics - Scope, designation, requirements, tests
- LST EN ISO 2039-1:2004 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
- LST EN 28233-2001 Thermoplastics valves - Torque - Test method (ISO 8233:1988)
- LST EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
- LST EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
AENOR, Plastic Ball Test
- UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
- UNE-CEN/TS 16010:2015 EX Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
- UNE 53270:2012 Plastics. Barcol hardness test.
- UNE 53257-1:1988 PLASTICS. SHOPPING PLASTICS BAGS FOR ALIMENTARY USE. REQUIREMENTS AND TEST METHODS
- UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
- UNE-EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
- UNE 22350:1981 STEMMING PLASTIC CARTRIDGE. ELECTROSTATICS TESTINGS.
- UNE-EN 28233:1992 THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (ISO 8233:1988)
- UNE-EN ISO 16135:2007 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
- UNE-EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
- UNE-EN 12814-1:2000 TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: BEND TEST
- UNE-EN 917:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
WRC - Welding Research Council, Plastic Ball Test
- BULLETIN 164-1971 PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS; PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS
Japanese Industrial Standards Committee (JISC), Plastic Ball Test
- JIS K 6546:1995 Testing method for set in lasting with the dome plasticity apparatus
- JIS K 7122:1987 Testing methods for heat of transitions of plastics
- JIS K 7123:1987 Testing methods for specific heat capacity of plastics
- JIS K 7139:2009 Plastics -- Test specimens
- JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
- JIS K 7105:1981 Testing methods for optical properties of plastics
- JIS K 7216:1980 Testing method for brittleness temperature of plastics
- JIS K 7121:1987 Testing methods for transition temperatures of plastics
- JIS K 7145:2000 Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
- JIS K 7152-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
- JIS K 7152-4:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
SE-SIS, Plastic Ball Test
ES-AENOR, Plastic Ball Test
(U.S.) Ford Automotive Standards, Plastic Ball Test
GM North America, Plastic Ball Test
TR-TSE, Plastic Ball Test
- TS 2401-1976 PLATICS AND EBON?TE — DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD
- TS 1149-1978 PLASTICS - INJECTION MOULDING TEST SPECIMENS OF TERMOPLASTIC MATERIALS
- TS 1850-1975 PLASTICS DETERMINATION OF FLAMMABILITY OF PLASTICS ?N THE FORM OF BARS
American National Standards Institute （ANSI), Plastic Ball Test
AIA/NAS - Aerospace Industries Association of America Inc., Plastic Ball Test
- NAS198-2012 KNOB@ CONTROL@ 1.25 SPHERICAL@ PLASTIC (Rev 4)
International Federation of Trucks and Engines, Plastic Ball Test
未注明发布机构, Plastic Ball Test
- BS ISO 4433-2:1997(1999)*BS 2782-11 Method 1161B:1998 Methods of testing plastics : Part 11 : Thermoplastics pipes, fittings and valves, as Method 1161B, for association with related test methods for plastics materials and plastics piping components .
- BS EN ISO 4600:1998 Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
National Metrological Verification Regulations of the People's Republic of China, Plastic Ball Test
- JJG 369-1993 Verification Regulation of Plastic Ball Indentation Hardness Testing Machine
Professional Standard - Machinery, Plastic Ball Test
- JB/T 7410-2010 Specification for the ball indentation hardness testers of plastics
- JB/T 7410-1994 Specifications for Plastic Ball Indentation Hardness Tester
American Society for Testing and Materials (ASTM), Plastic Ball Test
- ASTM D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1045-08 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1045-14 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1692-68 Standard Method Of Test For Flammability Of Plastic Sheeting And Cellular Plastics
- ASTM D2122-98e1 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2122-22 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D2457-97 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
VN-TCVN, Plastic Ball Test
- TCVN 4501-2-2009 Plastics.Determination of tensile propertie.Part 2: Test conditions for moulding and extrusion plastics
- TCVN 4501-2-2014 Plastics - Determination of tensile properties .Part 2:Test conditions for moulding and extrusion plastics
Society of Automotive Engineers (SAE), Plastic Ball Test
- SAE J1717-2007 Interior Automotive Plastic Part Testing
- SAE J323-2009 Test Method for Determining Cold Cracking of Flexible Plastic Materials
GM Daewoo, Plastic Ball Test
SAE - SAE International, Plastic Ball Test
- SAE J1717-2017 Interior Automotive Plastic Part Testing
- SAE J323-1996 Test Method for Determining Cold Cracking of Flexible Plastic Materials
- SAE J323-1998 Test Method for Determining Cold Cracking of Flexible Plastic Materials
Aerospace Industries Association/ANSI Aerospace Standards, Plastic Ball Test
工业和信息化部, Plastic Ball Test
Standard Association of Australia （SAA）, Plastic Ball Test
- AS 1141.28:1999 Methods for sampling and testing aggregates - Ball mill value
- AS 1145.2:2001 Determination of tensile properties of plastics materials - Test conditions for moulding and extrusion plastics
- AS/NZS 1462.26:2003 Methods of test for plastics pipes and fittings - Determination of weathering resistance of plastics pipes for external storage
KR-KS, Plastic Ball Test
Professional Standard - Building Materials, Plastic Ball Test
- JC/T 783-2004 Ball valves of glass fiber reinforced modified phenolic
Taiwan Provincial Standard of the People's Republic of China, Plastic Ball Test
NO-SN, Plastic Ball Test
- NS 4000-1967 Pressure test of plastic bags by the use of the EPPT-tester
BE-NBN, Plastic Ball Test