ZH
RU
ES

How to Test Wire Conductivity

How to Test Wire Conductivity, Total:500 items.

In the international standard classification, How to Test Wire Conductivity involves: Electrical wires and cables, Products of the textile industry, Telecommunication systems, Components and accessories for telecommunications equipment, Electrical accessories, On-board equipment and instruments, Printed circuits and boards, Testing of metals, Electromagnetic compatibility (EMC), Conducting materials, Surface treatment and coating, Water quality, Radiocommunications, Integrated circuits. Microelectronics, Power transmission and distribution networks, Electricity. Magnetism. Electrical and magnetic measurements, Electronic tubes, Analytical chemistry, Semiconductor devices, Electrical and electronic testing, Insulating materials, Optics and optical measurements, Television and radio broadcasting, Special measuring equipment for use in telecommunications, Aerospace electric equipment and systems, Power stations in general, Chipless working equipment, Piezoelectric and dielectric devices, Shipbuilding and marine structures in general, Road vehicle systems, Protection against fire, Materials for aerospace construction, Railway rolling stock, Linear and angular measurements, Adhesives, Welding, brazing and soldering, Rubber, Mobile services, Astronomy. Geodesy. Geography, Lubricants, industrial oils and related products, Telecommunications in general, Packaging machinery, Applications of information technology, Mechanical testing, Electrical engineering in general, Radiation measurements, Corrosion of metals, Petroleum products in general, Products of the chemical industry, Graphic technology, Rubber and plastics products.

FI-SFS, How to Test Wire Conductivity

• SFS-IEC 885-1:1989
• SFS 2905-1975
• SFS 4879-1982

Defense Logistics Agency, How to Test Wire Conductivity

• DLA MIL-DTL-13169 D-2006 WIRE, ELECTRICAL (FOR INSTRUMENT TEST LEADS)
• DLA SMD-5962-93228 REV B-2005 MICROCIRCUIT, DIGITAL, CMOS, TEST BUS CONTROLLER, MONOLITHIC SILICON

Korean Agency for Technology and Standards (KATS), How to Test Wire Conductivity

• KS C IEC 61788-21:2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
• KS C IEC 61788-14:2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
• KS C 6111-2-2005 Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system composite superconductors by a magnetic method using an ac susceptometer
• KS C IEC 61788-24:2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
• KS C IEC 60332-1-2002(2012) Tests on electric cables under fire conditions－Part 1：Test on a single vertical insulated wire or cable
• KS C IEC 60851-5-2015(2020) Winding wires — Test methods — Part 5：Electrical properties
• KS C CISPR 16-2-1-2012 Specification for radio disturbance and immunity measuring apparatus and methods-Part 2-1:Methods of measurement of disturbances and immunity-Conducted disturbance measurements
• KS X IEC 60872-3:2005 Maritime navigation and radiocommunication equipment and systems-Radar plotting aids-Part 3:Electronic plotting aid(EPA)-Performance requirements-Methods of testing and required test results
• KS X IEC 61174-2003(2018) Maritime navigation and radiocommunication equipment and systems — Electronic chart display and information system(ECDIS) — Operational and performance requirements,methods of testing and required tes
• KS X IEC 60872-3:2013 Maritime navigation and radiocommunication equipment and systems－Radar plotting aids－Part 3：Electronic plotting aid(EPA)－Performance requirements－Methods of testing and required test results

KR-KS, How to Test Wire Conductivity

• KS C IEC 61788-21-2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
• KS C IEC 61788-14-2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
• KS C IEC 61788-24-2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

CZ-CSN, How to Test Wire Conductivity

• CSN 34 7007-1964 Power conductors and cables. Testing.
• CSN 34 7171-1965 Breakdown voltage test. Wires. Conductors for winding
• CSN 30 4011-1993 Road vehicles. Electromagnetic compatibility. Electrical transient conduction along supply lines. Requirements and test methods
• CSN 37 1340-1985 Connecting and ending elements for power cables and conductors. Technical requirements and testing methods
• CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity

Henan Provincial Standard of the People's Republic of China, How to Test Wire Conductivity

• DB41/T 1790-2019 Determination of Conductive Properties of Textile Conductive Yarns

RU-GOST R, How to Test Wire Conductivity

• GOST 7229-1976 Cables, wires and cords. Method of measurement of electrical resistance of conductors
• GOST 12182.2-1980 Cables, wires and cords. Method of control of winding strength
• GOST 12182.4-1980 Cables, wires and cords. Method of control of re-winding strength
• GOST 12182.6-1980 Cables, wires and cords. Method of control of crushing resistance
• GOST R 53316-2009 Cable lines. Circuit integrity under fire. Test method
• GOST R 53316-2021 Electrica wiring. Maintaining operability in the conditions of the standard temperature regime of afire. Test methods
• GOST R 51318.16.2.1-2008 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of measurement of radio disturbances and immunity. Conducted radio disturbance measurements
• GOST 17491-1980 Cable wires and cords with rubber and plastic insulation and sheath. Methods of frostproofness test
• GOST R 52865-2009 Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods
• GOST R 52865-2007 Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods
• GOST R ISO/IEC 18046-2009 Automatic identification. Radio frequency identification. Radio frequency identification device performance test methods
• GOST IEC 60851-3-2016 Winding wires. Test methods. Part 3. Mechanical properties
• GOST 19868-1974 Spectrometric linear amplifiers for transistorized detectors of ionizing radiations. Methods of measuring parameters
• GOST R IEC 61174-2009 Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
• GOST R 51318.16.1.2-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-2. Radio disturbance and immunity measuring apparatus and methods. Conducted radio disturbance measuring and imm
• GOST R 52691-2006 Electromagnetic compatibility of technical equipment. Maritime navigation and radiocommunication equipment and systems. Requirements and test methods
• GOST R 51320-1999 Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources

Association Francaise de Normalisation, How to Test Wire Conductivity

• NF EN 62567:2014 Lignes électriques aériennes - Méthodes d'essai des caractéristiques d'auto-amortissement des conducteurs
• NF C31-800:1989 Wires for electrical machinery and apparatus. Measurement of the characteristics of a niobiom-titanium multifilamentary superconducting wire without insulation.
• NF EN 16812:2016 Textiles et produits textiles - Textiles électriquement conducteurs - Détermination de la résistance électrique linéaire des pistes conductrices
• NF C31-888-14*NF EN 61788-14:2014 Superconductivity - Part 14 : supercondcuting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
• NF EN ISO 284:2013 Courroies transporteuses - Conductibilité électrique - Spécification et méthode d'essai
• NF F21-206-1*NF EN 50206-1:2000 Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 1 : pantographs for main line vehicles
• NF F21-206-1*NF EN 50206-1:2011 Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 1 : pantographs for main line vehicles
• NF EN 61000-4-6:2014 Compatibilité électromagnétique (CEM) - Partie 4-6 : Techniques d'essai et de mesure - Immunité aux perturbations conduites, induites par les champs radioélectriques
• NF Z84-394-1*NF EN 300394-1:2015 Terrestrial trunked radio (TETRA) - Conformance testing specification - Part 1 : radio (V3.3.1)
• NF EN 300394-1:2015 Réseau radio transeuropéen (TETRA) - Spécification d'essai de conformité - Partie 1 : radio (V3.3.1)
• NF C45-205-6:2001 Electrical relays - Part 22-6 : elctrical disturbances tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields.
• NF EN 61788-14:2014 Supraconductivité - Partie 14 : dispositifs supraconducteurs de puissance - Exigences générales pour les essais de caractéristiques d'amenées de courant conçus pour alimenter des dispositifs supraconducteurs
• NF C46-671*NF EN 62376:2011 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results
• NF F21-702*NF EN 50702:2021 Railway applications - Rolling stock - Conductor rail current collectors (shoegear) : characteristics and tests
• NF C31-888-8:2003 Superconductivity - Part 8 : AC loss measurements - Total AC loss measurement of Cu/Nb To composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method.
• NF ISO 16525-2:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 2 : détermination des propriétés électriques pour utilisation dans des assemblages électroniques
• NF EN 62047-11:2014 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 11 : méthode d'essai pour les coefficients de dilatation thermique linéaire des matériaux autonomes pour systèmes microélectromécaniques
• NF C46-814*NF EN 62388:2017 Maritime navigation and radiocommunication equipment and systems Shipborne radar - Performance requirements, methods of testing and required test results
• NF C91-004-3:1997 Electromagnetic compatibility (EMC). Part 4 : testing and measurement techniques. Section 3 : radiated, radio-frequency, electromagnetic field immunity test.
• NF L52-252-302*NF EN 4057-302:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 302 : flammability
• NF C32-074:1993 TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.
• NF C46-812-4*NF EN 61108-4:2005 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4 : shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test
• NF C31-888-24*NF EN IEC 61788-24:2018 Superconductivity - Part 24 : critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
• NF C91-004-20*NF EN IEC 61000-4-20:2022 Electromagnetic compatibility (EMC) - Part 4-20 : testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• NF EN 61000-4-31:2017 Compatibilité électromagnétique (CEM) - Partie 4-31 : techniques d'essai et de mesure - Essai d'immunité aux perturbations conduites à large bande sur les accès d'alimentation secteur en courant alternative
• NF EN IEC 63203-201-1:2022 Technologies et dispositifs électroniques prêts-à-porter - Partie 201-1 : Textile électronique - Méthodes de mesure des propriétés fondamentales des fils conducteurs
• NF C91-004-31*NF EN 61000-4-31:2017 Electromagnetic compatibility (EMC) - Part 4-31 : testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test
• NF C91-004-20*NF EN 61000-4-20:2011 Electromagnetic compatibility (EMC) - Part 4-20 : testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides.
• NF C96-022-26*NF EN IEC 60749-26:2018 Semiconductor devices - Mechanical and climatic test methods - Part 26 : electrostatic discharge (ESD) sensitivity testing - Human body model (HBM)
• NF EN IEC 60749-26:2018 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 26 : essai de sensibilité aux décharges électrostatiques (DES) - Modèle du corps humain (HBM)
• NF EN IEC 60749-28:2022 Dispositifs à semiconducteurs - Méthodes d'essai mécaniques et climatiques - Partie 28 : Essai de sensibilité aux décharges électrostatiques (DES) - Modèle de dispositif chargé (CDM) - niveau du dispositif
• NF L52-250-418:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418 : thermal endurance for conductors.
• NF EN 3475-301:2002 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie 301 : résistance électrique linéique
• NF C46-819*NF EN 61174:2015 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results

BR-ABNT, How to Test Wire Conductivity

• ABNT NBR 9150-2013 Wire and cables for telecommunication — Separation of insulated conductors — Test method

NZ-SNZ, How to Test Wire Conductivity

• AS/NZS 1660.5.5:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.5: Fire Tests - Circuit integrity
• AS/NZS 1660.5.6:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.6: Fire Tests - Test for vertical flame propagation for a single insulated wire or cable
• AS/NZS 1660.1:1998 Test Methods for Electric Cables, Cords and Conductors Method 1: Conductors and Metallic Components
• AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity
• AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductors Method 5.2: Fire testsMeasurement of smoke density of cables burning under defined conditions
• AS/NZS 1660.5.3:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.3: Fire Tests - Determination of the Amount of Halogen Acid Gas Evolved During the Combustion of Polymeric Materials Taken from Cables

German Institute for Standardization, How to Test Wire Conductivity

• DIN VDE 0472-604:1985 Testing of cables, wires and flexible cords; tightness of cables sheaths
• DIN 57472-625:1983 Testing of cables, wires and flexible cords; traction relief for cables and insulated wires by strain-bearing elements [VDE Specification]
• DIN 57472-506:1983 Testing of cables, wires and flexible cords; capacitance unbalance [VDE Specification]
• DIN VDE 0472-603:1989 Testing of cables, wires and flexible cords; bending behaviour
• DIN EN 16812:2016-11 Textiles and textile products - Electrically conductive textiles - Determination of the linear electrical resistance of conductive tracks; German version EN 16812:2016
• DIN EN 16812:2016 Textiles and textile products - Electrically conductive textiles - Determination of the linear electrical resistance of conductive tracks; German version EN 16812:2016
• DIN EN ISO 284:2013-04 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012); German version EN ISO 284:2012
• DIN 57472-812:1984 Testing of cables, wires and flexible cords; continuity of metallic coatings [VDE Specification]
• DIN 57472-808:1984 Testing of cables, wires and flexible cords; tinning, solderability and soldering shrinkage [VDE Specification]
• DIN EN 300394-1:2015-10 Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 1: Radio (Endorsement of the English version EN 300 394-1 V3.3.1 (2015-04) as German standard) / Note: DIN ETS standards collection*Endorsement notice
• DIN EN 61788-14:2011 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (IEC 61788-14:2010); German version EN 61788-14:2010
• DIN 53142-2:2014-12 Testing of board - Puncture test - Part 2: Puncture test with linear move
• DIN EN 61924:2007-02 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results (IEC 61924:2006); German version EN 61924:2006, text in English / ...
• DIN EN 3475-505:2023-05 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands; German and English version EN 3475-505:2023
• DIN EN 61108-4:2005-06 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required tes...
• DIN EN 62388 Berichtigung 1:2014-05 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results (IEC 62388:2013); English Version EN 62388:2013, Corrigendum to DIN EN 62388:2014-04; (IEC-Cor.:...
• DIN EN 4057-302:2008 Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability; German and English version EN 4057-302:2006
• DIN EN 62047-11:2014-04 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems (IEC 62047-11:2013); German version EN 62047-11:2013
• DIN 51412-1:2005 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
• DIN EN 62376:2011-08 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results (IEC 62376:2010); English version EN 62376:2011
• DIN EN 13763-4:2021-05 Explosives for civil uses - Detonators and detonating cord relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes; German and English version prEN 13763-4:2021 / Note: Date of issue 2021-04-23*Intended as replacement ...
• DIN EN 62388:2014-04 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results (IEC 62388:2013); English version EN 62388:2013 / Note: DIN EN 62388 (2008-09) remains valid alo...
• DIN EN 3475-306:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors; German and English version EN 3475-306:2005

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to Test Wire Conductivity

• GB/T 33655-2017 Superconducting power devices—General requirements for characteristic tests of current leads designed for powering superconducting devices
• GB/T 12631-2017 Test method for resistance of conductors of printed boards
• GB/T 34657.1-2017 Interoperability test specifications of electric vehicle conductive charging—Part 1: Supply equipment
• GB/T 34657.2-2017 Interoperability test specifications of electric vehicle conductive charging—Part 2：Vehicle

IX-ICAO, How to Test Wire Conductivity

• ICAO 8071-1-2000 Manual on Testing of Radio Navigation Aids - Volume I: Testing of Ground-based Radio Navigation Systems
• ICAO 8071-2-2007 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems
• ICAO 8071-2 CORR-2008 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems; Corrigendum
• ICAO 8071-3-1998 Manual on Testing of Radio Navigation Aids - Volume III: Testing of Surveillance Radar Systems

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to Test Wire Conductivity

• GB/T 3048.4-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of D.C. resistance of conductors
• GB/T 12631-1990 Test method for resistance of conductor of printed boards
• GB/T 3048.2-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of resistivity of metallic conductive materials
• GB/T 3048.4-2007 Test methods for electrical properties of electric cables and wires.Part 4: Test of DC resistance of conductors
• GB/T 3048.3-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of volumeresistivity of semi-conducting rubbers and plastics
• GB/T 4825.1-1984 Test method for partial discharge of conductors on printed boards
• GB/T 2951.37-1994 Test method for determining mechanical and physical properties of electric cables and wires. Test for oxidative inductive time
• GB/T 3048.3-2007 Test methods for electrical properties of electric cables and wires.Part 3: Test of volume resistivity of semi-conducting rubbers and plastics
• GB/T 13170.2-1991 Test charts of reflection for television.Linear test chart A
• GB/T 13170.3-1991 Test charts of reflection for television.linear test chart B
• GB/T 6833.9-1987 Electromagnetic compatibility test specification forelectronic measuring instruments--Conduced interference test
• GB 6996.2-1986 Linear test chart A of transparencies for television
• GB/T 6996.2-1986 Linear test chart A of transparencies for television
• GB/T 6996.3-1986 Linear test chart B of transparencies for television
• GB/T 12079-1989 Measurements of the photoelectric properties for X-ray tubes
• GB/T 12079-2012 Measurements of the photoelectric properties for X-ray tubes
• GB/T 3789.13-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common grid circuit
• GB/T 3789.14-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common cathode circuit
• GB/T 6833.6-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Conducted susceptibility test
• GB/T 3789.19-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of frequency characteristic curve
• GB/T 3789.6-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of transconductance and amplification factor
• GB/T 14024-1992 Limits and methods of measurement of radio interference characteristics of electric power plant with internal combustion engines.Conducted interference
• GB/T 3789.29-1991 Measurements of the electrical properties of transmitting tubes--Method of measuring the non-linearity in the luminance of the lower frequency
• GB/T 3789.24-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of dual tone inter-modulation distortion of linear amplifier tubes
• GB/T 43053-2023 Maritime navigation and radiocommunication equipment and systems Electronic Chart Display and Information System (ECDIS) Operational and performance requirements, test methods and required test results

BE-NBN, How to Test Wire Conductivity

• NBN I-983-1969
• NBN I-982-1969
• NBN I-984-1969

Professional Standard - Aerospace, How to Test Wire Conductivity

• QJ 20022-2011 The electrical measuring method of radome for passive seeker
• QJ 2428-1993 Electromagnetic Compatibility Test Method for Tactical Missile Weapon System

YU-JUS, How to Test Wire Conductivity

• JUS N.A5.053-1990 Electrotechnical engineering. Pire bazsrd testivg. Glou-wire test
• JUS N.C0.039-1984 Testing ofcables and flexible cords. Voltage test
• JUS N.C6.005-1981 Ri>dio-frequency cables. Continuity test of the silver coating of inner conductors
• JUS N.C0.035-1983 Tatting of insulatad conductors and cables. Measurement of electrical resistance of conductors.
• JUS N.C0.082-1990 Electric povverandlighting. Testing ofinsu/atedconductors andcables. Tinning ofplain conductors
• JUS N.C0.052-1984 Electrical povner and lighting. Testing of insulated conductors andcables. Flexibility
• JUS N.C0.056-1985 Electrical povverand lighting\ Testing of insulatedconductors andcables. Elasticity atlow temperatures
• JUS N.C0.036-1980 Testing offlexible cords and cables. Measurements ofinsulation resistance, resistance of semi-conducting layers and surface resistance.
• JUS N.C0.030-1980 Testing offlacible cords and cables. General testing conditions
• JUS N.C0.031-1987 Electric povver and lighting. Testing of insulated conductors and cables. Checking of construction
• JUS N.C0.050-1984 Electrical power andlighting. Tests of insulatedconductors and cables. I/Vear resistance
• JUS N.C0.041-1984 Testing ofcables and flexible cords. Resistance to direct voltage
• JUS N.C0.071-1980 Testing offlexible cords and cables. Tear resistance
• JUS N.C0.055-1985 Electric povverandlighting. Testing of insulatedconductors andcables. Hotdeformation
• JUS N.C0.030-1987 E/etric povver and lighting. Testing of insulated conductors and cab/es. General testing conditions
• JUS N.C0.074-1987 Electric povver and lighting. Testing of insulated conductors and cables. Resistance to oil
• JUS N.C0.075-1984 Electrical pover and lighting. Testing of insulated conductors and cables. Fire resistance
• JUS N.C0.048-1985 Electrical power and lighting. Testing of insulated conductors and cables. Separability of cores of flat twin insulated conductors
• JUS N.C0.058-1980 Testing of insulated cords and cables. Thermal stability
• JUS N.C0.076-1995 Testing of insylated cords and cables - Ozone resistance
• JUS N.R4.464-1978 Electromechanical components for electronic equipment. Test metho?s. Test 16f: Robustness of terminations

Standard Association of Australia （SAA）, How to Test Wire Conductivity

• AS/NZS 1660.4:1998 Test methods for electric cables, cords, and conductors - Complete cable and flexible cord
• AS/NZS 1660.4:1998/AMD 1:1998 Amendment No. 1 to AS/NZS 1660.4:1998 Test methods for electric cables, cords and conductors Method 4: Complete cable and flexible cord
• AS 3894.1:2002(R2013)
• AS 3894.2:2002(R2013)
• AS/NZS CISPR 16.1.2:2004(2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
• IEC 61174:2015 RLV Maritime navigation and radiocommunication equipment and systems — Electronic chart display and information system (ECDIS) — Operational and performance requirements, methods of testing and required test results

International Electrotechnical Commission (IEC), How to Test Wire Conductivity

• IEC 61788-25:2018 Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires
• IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
• IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
• IEC 62615:2010 Electrostatic discharge sensitivity testing - Transmission line pulse (TLP) - Component level
• IEC 60851-5:2011 Winding wires - Test methods - Part 5: Electrical properties
• IEC 61000-4-3:2010 Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test (Edition 3.2; Consolidated Reprint; Includes Interpretation 1: 08/2008)
• IEC 61788-8:2010 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
• IEC 61108-4:2004 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test r
• IEC 61000-4-31:2016 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test
• IEC 62065:2014 Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results
• IEC 60872-3:2000 Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA); Performance requirements; Methods of testing and required test results
• IEC 61000-4-20:2003 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides

European Committee for Standardization (CEN), How to Test Wire Conductivity

• EN 16812:2016 Textiles and textile products - Electrically conductive textiles - Determination of the linear electrical resistance of conductive tracks
• EN 3475-306:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors
• prEN 13763-4-2021 Explosives for civil uses - Detonators and detonating cord relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes
• EN 4057-302:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability

ES-UNE, How to Test Wire Conductivity

• UNE-EN 16812:2016 Textiles and textile products - Electrically conductive textiles - Determination of the linear electrical resistance of conductive tracks
• UNE-EN 61788-14:2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (Endorsed by AENOR in November of 2010.)
• UNE-EN ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012) (Endorsed by AENOR in February of 2013.)
• UNE-EN 50702:2021 Railway applications - Rolling stock - Conductor rail current collectors (shoegear): Characteristics and tests
• UNE-EN 62047-22:2014 Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates (Endorsed by AENOR in November of 2014.)
• UNE-EN 62376:2011 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results (Endorsed by AENOR in June of 2011.)
• UNE-EN 3475-505:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands (Endorsed by Asociación Española de Normalización in April of 2023.)
• UNE-EN 62388:2013 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results (Endorsed by AENOR in January of 2014.)
• UNE-ETS 300394-2-1 Ed1:2006 Terrestrial Trunked Radio (TETRA). Conformance testing specification; Part 2: Protocol testing specification for Voice plus Data (V+D); Sub-part 1: Test suite structure and test purposes (Endorsed by AENOR in November of 2006.)
• UNE-EN 62616:2010 Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) - Performance requirements, methods of testing and required test results (Endorsed by AENOR in August of 2010.)
• UNE-EN 61000-4-31:2017 Electromagnetic Compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test (Endorsed by Asociación Española de Normalización in April of 2017.)
• UNE-EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems (Endorsed by AENOR in November of 2013.)
• UNE-EN 61174:2015 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (Endorsed by AENOR in January of 2016.)
• UNE-EN IEC 63203-201-1:2022 Wearable electronic devices and technologies - Part 201-1: Electronic textile - Measurement methods for basic properties of conductive yarns (Endorsed by Asociación Española de Normalización in July of 2022.)
• UNE-EN IEC 61000-4-20:2022 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• UNE-EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires (Endorsed by Asociación Española de Normalización in October of 2018.)

工业和信息化部, How to Test Wire Conductivity

• SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials

British Standards Institution (BSI), How to Test Wire Conductivity

• BS EN 61000-4-6:2014 Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
• BS EN 60851-5:2008+A2:2019 Winding wires. Test methods - Electrical properties
• BS EN 61788-14:2010 Superconductivity. Part 14: Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices
• BS EN 61395:1998 Overhead electrical conductors. Creep test procedures for stranded conductors
• BS EN IEC 62496-2-5:2022 Optical circuit boards. Basic test and measurement procedures - Flexibility test for flexible opto-electric circuits
• BS IEC 62047-32:2019 Semiconductor devices. Micro-electromechanical devices - Test method for the nonlinear vibration of MEMS resonators
• BS IEC 62951-6:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Test method for sheet resistance of flexible conducting films
• BS EN 60851-3:2009+A2:2019 Winding wires. Test methods - Mechanical properties
• BS EN IEC 60851-3:2023 Winding wires. Test methods - Mechanical properties
• BS EN 3475-306:2006 Aerospace series. Cables, electrical, aircraft use. Test methods. Continuity of conductors
• BS EN 3475-306:2005 Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors
• BS EN 61788-8:2003 Superconductivity - AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
• BS ISO 14137:2015 Tracked Changes. Test conditions for wire electrical-discharge machines (wire EDM). Testing of the accuracy
• BS EN IEC 61788-24:2018 Superconductivity - Critical current measurement. Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
• BS DD IEC/PAS 61338-1-5:2010 Waveguide type dielectric resonators - General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
• BS EN 61338-1-5:2015 Waveguide type dielectric resonators. General information and test conditions. Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
• BS EN IEC 63203-201-1:2022 Wearable electronic devices and technologies - Electronic textile. Measurement methods for basic properties of conductive yarns
• BS EN 50702:2021 Railway applications. Rolling stock. Conductor rail current collectors (shoegear): Characteristics and tests
• BS EN 61788-8:2010 Superconductivity. AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
• BS EN 61788-6:2011 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
• BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of electrical characteristics for use in electronic assemblies
• BS IEC 62047-35:2019 Semiconductor devices. Micro-electromechanical devices - Test method of electrical characteristics under bending deformation for flexible electromechanical devices
• BS EN 3475-505:2023 Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands
• BS EN 61924:2006 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results
• BS IEC 62153-4-8:2018 Metallic cables and other passive components. Test methods - Electromagnetic compatibility (EMC). Capacitive coupling admittance
• BS EN 61000-4-20:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• BS EN 61000-4-20:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• BS EN 3475-418:2019 Aerospace series. Cables, electrical, aircraft use. Test methods - Thermal endurance for conductors
• BS EN 4057-302:2007 Aerospace series - Cable ties for harnesses - Test methods - Flammability
• BS EN 4057-302:2006 Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 302: Flammability
• BS IEC 62951-1:2017 Semiconductor devices. Flexible and stretchable semiconductor devices - Bending test method for conductive thin films on flexible substrates
• BS EN 60851-4:2016 Tracked Changes. Winding wires. Test methods. Chemical properties
• BS IEC 62047-40:2021 Semiconductor devices. Micro-electromechanical devices. Test methods of micro-electromechanical inertial shock switch threshold
• BS EN IEC 61000-4-20:2022 Tracked Changes. Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• BS EN 61000-4-3:2006+A1:2008 Electromagnetic compatibility (EMC) — Part 4-3: Testing and measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test
• BS IEC 62830-5:2021 Semiconductor devices. Semiconductor devices for energy harvesting and generation. Test method for measuring generated power from flexible thermoelectric devices
• BS IEC 62951-9:2022 Semiconductor devices. Flexible and stretchable semiconductor devices - Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
• BS EN 61000-4-31:2017 Electromagnetic compatibility (EMC). Testing and measurement techniques. AC mains ports broadband conducted disturbance immunity test
• BS EN IEC 61108-5:2020 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS) - BeiDou navigation satellite system (BDS). Receiver equipment. Performance requirements, methods of testing and required test results

ZA-SANS, How to Test Wire Conductivity

• SANS 6282-1:2007 Test methods for bare conductors and conductors of insulated electric cables Part 1: Conductor resistance
• SANS 6282-3:2007 Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests
• SANS 60851-5:2009 Winding wires - Test methods Part 5: Electrical properties
• SANS 300127:1999 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radiated emission testing of physically large telecommunication systems
• SANS 6282-2:2007 Test methods for bare conductors and conductors of insulated electric cables Part 2: Quality of metallic coatings

Danish Standards Foundation, How to Test Wire Conductivity

• DS/EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
• DS/EN 61924:2006 Maritime navigation and radiocommunication equipment and systems – Integrated navigation systems – Operational and performance requirements, methods of testing and required test results
• DS/EN 62376:2012 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results
• DS/EN 50702:2021 Railway applications – Rolling stock – Conductor rail current collectors (shoegear): Characteristics and tests
• DS/EN 61108-4:2005 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) -- Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test
• DS/ETS 300394-1:1997 Radio Equipment and Systems (RES) - Trans-European Trunked Radio (TETRA) - Conformance testing specification - Part 1: Radio
• DS/I-ETS 300235:1995 Radio Equipment and Systems (RES) - Technical characteristics, test conditions and methods of measurement for radio aspects of cordless telephones CT1
• DS/ETS 300836-1:1998 Broadband Radio Acces Networks (BRAN) - HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 - Conformance testing specification - Part 1: Radio type approval and Radio Frequency (RF) conformance test specification
• DS/EN 62388:2008 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results
• DS/EN 62388:2013 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results
• DS/EN 300789 V1.1.1:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Avionic termination radio testing specification
• DS/EN 61000-4-20:2011 Electromagnetic compatibility (EMC) – Part 4-20: Testing and measurement techniques – Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• DS/EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
• DS/EN 60749-26:2006 Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM)
• DS/EN 61174:2009 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results
• DS/ETS 300836-3:1998 Broadband Radio Access Networks (BRAN) - HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 - Conformance testing specification - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification
• DS/EN 300127 V1.2.1:2000 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiated emission testing of physically large telecommunication systems

European Committee for Electrotechnical Standardization（CENELEC）, How to Test Wire Conductivity

• EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
• EN IEC 63203-201-1:2022 Wearable electronic devices and technologies - Part 201-1: Electronic textile - Measurement methods for basic properties of conductive yarns
• EN 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
• EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
• EN IEC 61000-4-20:2022 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
• EN 61000-4-31:2017 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test
• EN 60749-26:2014 Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM)
• EN IEC 60749-26:2018 Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM)
• EN 61174:2015 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results

ES-AENOR, How to Test Wire Conductivity

• UNE 7 044
• UNE 20-606 Pt.2-1986

American Society for Testing and Materials (ASTM), How to Test Wire Conductivity

• ASTM D4399-90(1999) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
• ASTM D1125-95(1999) Standard Test Methods for Electrical Conductivity and Resistivity of Water
• ASTM D4399-05e1 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
• ASTM D4399-05(2011) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
• ASTM D4399-05(2017) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
• ASTM D5128-90(1999)e1 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
• ASTM D4872-99 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
• ASTM D4872-99(2004)e1 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
• ASTM D4872-14 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
• ASTM D5128-90(2005) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
• ASTM D5128-09 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
• ASTM D5128-14(2022) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
• ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
• ASTM D4566-20 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
• ASTM D5647-95 Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
• ASTM D2633-20 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ASTM D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
• ASTM D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
• ASTM E1161-95 Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components
• ASTM D991-89(2005) Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
• ASTM D6504-11 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
• ASTM D6745-06(2011) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
• ASTM D6745-01 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
• ASTM D6745-06 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
• ASTM G149-97 Standard Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion
• ASTM F326-96(2001)e1 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
• ASTM F326-96(2001)e2 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
• ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
• ASTM F617-00 Standard Test Method for Measuring MOSFET Linear Threshold Voltage (Withdrawn 2006)
• ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

HU-MSZT, How to Test Wire Conductivity

• MSZ 1168/4-1984
• MSZ 1168/3-1983
• MSZ 21880/3-1982
• MSZ 21470/2-1981

International Telecommunication Union (ITU), How to Test Wire Conductivity

• ITU-R INFORME M.2032 SPANISH-2003 Tests illustrating the compatibility between maritime radionavigation radars and emissions from radiolocation radars in the band 2 900-3 100 MHz
• ITU-R QUESTION 216-2/5-2001 Compatibility of radionavigation earth exploration-satellite (active) space research (active) mobile and radiolocation services operating in the band 5 350-5 650 MHz and compatibility between the radionavigation and radiolocation services in the band 2 90
• ITU-R RAPPORT M.2032 FRENCH-2003 Tests illustrating the compatibility between maritime radionavigation radars and emissions from radiolocation radars in the band 2 900-3 100 MHz
• ITU-R REPORT M.2032-2003 Tests illustrating the compatibility between maritime radionavigation radars and emissions from radiolocation radars in the band 2 900-3 100 MHz
• ITU-R QUESTION 216-25-2001 Compatibility of radionavigation, earth exploration-satellite (active), space research (active), mobile, and radiolocation services operating in the band 5 350-5 650 MHz and compatibility between the radionavigation and radiolocation services in the band
• ITU-R REPORT M.2081-2006 Test results illustrating compatibility between representative radionavigation systems and radiolocation and EESS systems in the band 8.5-10 GHz

(U.S.) Ford Automotive Standards, How to Test Wire Conductivity

• FORD FLTM BI 128-1-2001 ELECTROSTATIC CONDUCTIVITY TEST FOR PLASTIC PARTS

Institute of Electrical and Electronics Engineers (IEEE), How to Test Wire Conductivity

• IEEE 356-1974 Guide for radio methods of measuring earth conductivity
• IEEE 1595-2022 IEEE Standard for Testing and Performance for Optical Phase Conductor (OPPC) for Use on Electrical Utility Power Lines
• IEEE Std 1595-2022 IEEE Standard for Testing and Performance for Optical Phase Conductor (OPPC) for Use on Electrical Utility Power Lines
• IEEE P1595/D7, December 2021 IEEE Approved Draft Standard for Testing and Performance for Optical Phase Conductor (OPPC) for Use on Electrical Utility Power Lines
• IEEE 82/COR-2009 Errata to IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
• IEEE P1595/D6, June 2021 IEEE Draft Standard for Testing and Performance for Optical Phase Conductor (OPPC) for Use on Electrical Utility Power Lines
• IEEE Std 1210-1996 IEEE Standard tests for determining compatibility of cable - pulling lubricants with wire and cable
• IEEE Std 1210-2004 IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
• IEEE P1210 IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
• IEEE P1210/D2, June 2022 IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
• IEEE 1138-2021 IEEE Standard for Testing and Performance of Optical Ground Wire (OPGW) for use on Electric Utility Power Lines
• IEEE Std 1210-2004/COR 1-2014 IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable - Corrigendum 1
• IEEE 1775-2010 Power Line Communication Equipment—Electromagnetic Compatibility (EMC) Requirements—Testing and Measurement Methods
• IEEE Std 1138-2009 IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
• IEEE P1210-2004/Cor 1/D2, August 2013 IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable - Corrigendum 1
• IEEE Std 1775-2010 IEEE Standard for Power Line Communication Equipment--Electromagnetic Compatibility (EMC) Requirements--Testing and Measurement Methods
• IEEE 1210/COR 1-2014 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable Corrigendum 1
• IEEE P1138/D7, 2021 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
• IEEE Unapproved Draft Std P1138/D13.2, Oct 2008 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
• IEEE P1138/D6 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
• IEEE Unapproved Draft Std P1138/D14, Jul 2009 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
• IEEE Unapproved Draft Std P1138/D13.3, Feb, 2009 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines

Professional Standard - Electron, How to Test Wire Conductivity

• SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers
• SJ/Z 9010.12-1987 Measurements of electrical properties of electronic tubes and valves--Part 12: Methods of measuring for electrode resistance, transcondductance, amplification factor, conversion resistance and conversion transconductance
• SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
• SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
• SJ/Z 9010.3-1987 Measurements of electrical properties of electronic tubes and valves--Part 3: Measurement of equivalent input and output admittances
• SJ/Z 9010.24-1987 Measurement of electrical properties of electronic tubes Part 24 Methods of measurement for cathode-ray charge-storage tubes
• SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
• SJ/Z 9010.14-1987 Measurements of electrical properties of electronic tubes--Part 14: Methods of measurement of radar and osciloscope cathode-ray tubes

Professional Standard - Electricity, How to Test Wire Conductivity

• DL/T 1566-2016 Guide for measurement of DC transmission line and earth electrode line parameters
• DL/T 1329-2014 Realtime online economical performance monitoring guidelines for thermal power plants
• DL/T 2145.2-2020 On-site test guidelines for on-line monitoring devices for substation equipment Part 2: On-line monitoring devices for insulation between capacitive equipment and metal oxide arresters

PT-IPQ, How to Test Wire Conductivity

• NP 2849-1985
• NP 1143-1976
• NP 1142-1976
• NP 1140-1976
• NP 1141-1976
• NP 1139-1976

Lithuanian Standards Office , How to Test Wire Conductivity

• LST EN 61788-14-2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (IEC 61788-14:2010)
• LST EN 61395-2001 Overhead electrical conductors. Creep test procedures for stranded conductors (IEC 61395:1998)
• LST EN 50702-2021 Railway applications - Rolling stock - Conductor rail current collectors (shoegear): Characteristics and tests
• LST EN 300 789 V1.1.1-2005 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Terrestrial Flight Telecommunications System (TFTS); Avionic termination radio testing specification
• LST EN 61924-2006 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results (IEC 61924:2006)
• LST L I-ETS 300 235-1997 Radio equipment and systems (RES). Technical characteristics, test conditions and methods of measurement for radio aspects of cordless telephones CT1
• LST ETS 300 836-1-2002 Broadband Radio Acces Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance testing specification;Part 1: Radio type approval and Radio Frequency (RF) conformance test specification
• LST EN 61108-4-2005 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS). Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment. Performance requirements, methods of testing and required test resu
• LST EN 62376-2011 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results (IEC 62376:2010)
• LST EN 62388-2008 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results (IEC 62388:2007)
• LST EN 300 127 V1.2.1-2000 Electromagnetic compatibility and Radio spectrum Matters (ERM). Radiated emission testing of physically large telecommunication systems

AENOR, How to Test Wire Conductivity

• UNE-EN 61395:1999 OVERHEAD ELECTRICAL CONDUCTORS. CREEP TEST PROCEDURES FOR STRANDED CONDUCTORS.
• UNE 18155:1981 ANTISTATIC ENDLESS V-BELTS - ELECTRICAL CONDUCTIVITY - CHARACTERISTICS AND METHOD OF TEST.
• UNE 15601:2004 Wire electrical-discharge machines (wire EDM). Test conditions. Terminology and testing of the accuracy.
• UNE-I-ETS 300235:1999 RADIO EQUIPMENT AND SYSTEMS (RES). TECHNICAL CHARACTERISTICS, TEST CONDITIONS AND METHOD OF MEASUREMENT FOR RADIO ASPECTS OF CORDLESS TELEPHONES CT1.

Group Standards of the People's Republic of China, How to Test Wire Conductivity

• T/CIMA 0007-2020 Test guideline for synchronous line loss measuring device of distribution network
• T/CSEE 0114-2019 Injection capacitive current test guide for neutral point different frequency signal
• T/CEC 556-2021 Guidelines for installation, commissioning, operation and maintenance of high-voltage AC cable on-line monitoring device

AT-ON, How to Test Wire Conductivity

• ONORM E 3652-1989 Tests on cables and flexible cords; flame retardance-test on bunched cables
• ONORM M 1348-1995 Control of measuring and test equipment - Testing instruction for electrical linear measuring probes

PL-PKN, How to Test Wire Conductivity

• PN E04160 ArkusZ11-1973 Electric cables Methods of testing Test of the mechanical characteristics of vires
• PN E04164-12-1988 Enamelled round winding wires Methods of test Test of the electrical properties
• PN T06255-05-1988 Electronic e?Uipment for homeuse Radio receiver e?uipment Reliabilety testing in produce
• PN E04614-02-1988 Electrical and electronic products Environmental testing procedures Fire hazard testing . Guidance for electronic components [Translation of IEC Publication 695-1-2 (1982)]

Taiwan Provincial Standard of the People's Republic of China, How to Test Wire Conductivity

• CNS 8104-1981 Method for Measuring MOSFET Linear Threshold Voltage

未注明发布机构, How to Test Wire Conductivity

• DIN EN ISO 284:2004 Conveyor Belts – Electrical Conductivity – Specification and Test Methods

NEMA - National Electrical Manufacturers Association, How to Test Wire Conductivity

• NEMA WC 56-1986 3.0 kHz Insulation Continuity Proof Testing of Wire and Cable

TR-TSE, How to Test Wire Conductivity

• TS 2452-1976 MEASUBEMENTS OF THE ELECTRICAL PROPERTIES OF EIJECTRONIC TUBES AND VALVES PART 12 : METHODS OF MEASURING ELECTRODE RESISTANCE, TRANSCONDUCTANE, AMPLIFICATION FACTOR, CONVERSION RESISTANCE AND CONVERSION TRANSCONDUCTANCE
• TS 2443-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 3 : MEASUREMENT OF EQUIVALENT INPUT AND OUTPUT ADMITTANCES
• TS 2454-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 14 : METHODS OF MEASUREMENT OF RADAR AND OSCILLOSCOPE CATHODERAY TUBES

RO-ASRO, How to Test Wire Conductivity

• STAS 5924/5-1990 Winding wires methods of test elrctrical properties determination
• STAS 6693/2-1975 Semiconductor devices TRANSISTORS Methods for measuring electrical properties

Military Standard of the People's Republic of China-General Armament Department, How to Test Wire Conductivity

• GJB 6919-2009 Test and evaluation methods of conductorial-fibre performance

SE-SIS, How to Test Wire Conductivity

• SIS SS 424 02 62-1979 Rubber and thermoplastic insulated cords and cables — Lift cables — Testing

Professional Standard - Machinery, How to Test Wire Conductivity

• JB/T 10696.8-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires Part 8: Test for oxidative inductive time
• JB/T 12748-2015 Methods of test for the performance of wood alternative composite material for delivery drums for wires and cables
• JB/T 8261-2015 Test chart (A3) for screen and density inhomogeneity of electrostatic copy
• JB/T 8261-1999 The screening and non-uniformity of image density test chart for electrostatic copying process A3

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, How to Test Wire Conductivity

• REPORT M.2081-2006 Test results illustrating compatibility between representative radionavigation systems and radiolocation and EESS systems in the band 8.5-10 GHz
• REPORT M.2032-2003 Tests illustrating the compatibility between maritime radionavigation radars and emissions from radiolocation radars in the band 2 900-3 100 MHz
• QUESTION 216-2/5-2001 Compatibility of radionavigation@ earth exploration-satellite (active)@ space research (active)@ mobile@ and radiolocation services operating in the band 5 350-5 650 MHz and compatibility between the radionavigation and radiolocation services in the band

ETSI - European Telecommunications Standards Institute, How to Test Wire Conductivity

• TS 102 692-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); RF conformance testing of radar level gauging applications in still pipes (V1.1.1)
• TS 101 570-4-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability Testing for Maritime Digital Selective Calling (DSC) Radios; Part 4: Class E Test Descriptions (V1.1.1)
• TS 101 570-3-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability Testing for Maritime Digital Selective Calling (DSC) Radios; Part 3: Class D Test Descriptions (V1.1.1)
• PRETS 300 836-1-1997 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 Conformance Testing Specification; Part 1: Radio Type Approval and Radio Frequency (RF) Conformance Test Specification
• PRETS 300 836-1-1998 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance Testing Specification; Part 1: Radio Type Approval and Radio Frequency (RF) Conformance Test Specification
• PRETS 300 394-1-1995 Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA); Conformance Testing Specification Part 1: Radio
• TS 102 362-2-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (V1.2.1)
• TS 102 362-2-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (V1.3.1)
• TS 102 362-2-2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (V1.1.1)
• TS 102 587-6-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 6: Interoperability testing; Test Descriptions (TD) (V1.2.1)
• TS 102 587-6-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability testing for the Peer-to-Peer Digital Private Mobile Radio; Part 6: Test Descriptions (TD) (V1.1.1)
• TS 101 570-2-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability Testing for Maritime Digital Selective Calling (DSC) Radios; Part 2: Class A/B Test Descriptions (V1.1.1)
• PRI-ETS 300 235-1993 Radio Equipment and Systems (RES); Technical Characteristics@ Test Conditions and Methods of Measurement for Radio Aspects of Cordless Telephones CTI
• PRI-ETS 300 235-1992 Radio Equipment and Systems (RES); Technical Characteristics@ Test Conditions and Methods of Measurement for Radio Aspects of Cordless Telephones CT1
• ETSI EN 300 789:1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Terrestrial Flight Telecommunications System (TFTS); Avionic Termination Radio Testing Specification (V1.1.1)
• ETSI EN 300 789:1997 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Terrestrial Flight Telecommunications System (TFTS); Avionic Termination Radio Testing Specification (V1.1.1)
• TS 102 587-2-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 2: Conformance testing; Test Suite Structure and Test Purposes (TSS&TP) specification (V1.3.1)
• TS 102 587-2-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Peer-to-Peer Digital Private Mobile Radio; Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (V1.2.1)
• TS 102 587-2-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Peer-to-Peer Digital Private Mobile Radio; Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (V1.1.1)
• TS 102 362-3-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 3: Abstract Test Suite (ATS) (V1.2.1; Includes Diskette)
• TS 102 362-3-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 3: Abstract Test Suite (ATS) (V1.3.1; Includes Diskette)
• TR 102 750-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radar level gauging applications in still pipes (V1.1.1)
• TR 136 903-2011 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Derivation of test tolerances for multi-cell Radio Resource Management (RRM) conformance tests (V9.1.0; 3GPP TR 36.903 version 9.1.0 Release 9; Includes Diskette)
• TS 101 570-5-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability Testing for Maritime Digital Selective Calling (DSC) Radios; Part 5: Handheld VHF Class D Test Descriptions (V1.1.1)
• TS 102 587-5-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 5: Interoperability testing; Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification (V1.3.1)
• TS 102 587-5-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM; Interoperability testing for the Peer-to-Peer Digital Private Mobile Radio; Part 5: Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification (V1.1.1)
• TS 102 587-5-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Interoperability testing for the Peer-to-Peer Digital Private Mobile Radio; Part 5: Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification (V1.2.1)
• TS 102 726-3-2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMRTM); Part 3: Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification (V2.2.1)
• TS 102 726-3-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMR); Part 3: Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification (V2.1.1)
• TS 102 726-3-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMR); Part 3: Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification (V1.1.1)
• TS 102 726-2-2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (V2.1.1)
• TS 102 726-2-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification (V1.1.1)
• TS 102 587-4-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 4: Conformance testing; Abstract Test Suite (ATS) (V1.2.1; Includes Diskette)
• TS 102 587-4-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Peer-to-Peer Digital Private Mobile Radio; Part 4: Abstract Test Suite (ATS) (V1.1.1; Includes Diskette)
• TS 102 362-3-2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 3: Abstract Test Suite (ATS) specification (V1.1.1; Includes Diskette)
• TS 103 302-2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Test Specification for the RFID Interoperability Test Event in Brazil May 2013 (V1.1.1)
• ETS 300 836-1-1998 Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance Testing Specification; Part 1: Radio Type Approval and Radio Frequency (RF) Conformance Test Specification
• PRETS 300 836-3-1998 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance Testing Specification; Part 3: Test Suite Structure and Test Purposes (TSS&TP) Specification
• PRETS 300 836-3-1997 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 Conformance Testing Specification; Part 3: Test Suite Structure and Test Purposes (TSS&TP) Specification
• PRETS 300 836-4-1997 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 Conformance Testing Specification; Part 4: Abstract Test Suite (ATS) Specification
• PRETS 300 836-4-1998 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance Testing Specification; Part 4: Abstract Test Suite (ATS) Specification

Japanese Industrial Standards Committee (JISC), How to Test Wire Conductivity

• JIS H 7314:2013 Superconductivity -- Superconducting power devices -- General requirements for characteristic tests of current leads designed for powering superconducting devices
• JIS H 7310:2006 Superconductivity -- AC loss measurements -- Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
• JIS H 7310:2013 Superconductivity -- AC loss measurements -- Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., How to Test Wire Conductivity

• IEEE 1210 INT 1-2010 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
• IEEE 1210-2004 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable
• IEEE 1210 CORR 1-2014 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable Corrigendum 1
• IEEE 1210-1996 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable (CSA C22.2 No 249-96)

Society of Motion Picture and Television Engineers (SMPTE), How to Test Wire Conductivity

• SMPTE RP 38.1-1989 Specifications for Deflection Linearity Test Pattern for Television

国家市场监督管理总局、中国国家标准化管理委员会, How to Test Wire Conductivity

• GB/T 37656-2019 Maritime navigation and radiocommunication equipment and systems—VHF radiotelephone equipment incorporating Class“D”Digital Selective Calling（DSC）—Methods of testing and required test results
• GB/T 39042-2020 Measurement of the magnetic properties of electrical steels by means of a single sheet tester—H-coil method
• GB/T 21437.2-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only
• GB/T 37132-2018 General requirements and test methods of electromagnetic compatibility for wireless power transmission equipment

United States Navy, How to Test Wire Conductivity

• NAVY MIL-T-81404 B NOTICE 1-1996 TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER AND AIRCRAFT, AN/ASM-149C
• NAVY MIL-T-81404 B (1)-1985 TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER AND AIRCRAFT, AN/ASM-149C
• NAVY MIL-T-81404 B-1985 TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER AND AIRCRAFT, AN/ASM-149C

European Telecommunications Standards Institute (ETSI), How to Test Wire Conductivity

• ETSI PRI-ETS 300 235-1992 Radio Equipment and Systems (RES); Technical Characteristics, Test Conditions and Methods of Measurement for Radio Aspects of Cordless Telephones CT1
• ETSI PRI-ETS 300 235-1993 Radio Equipment and Systems (RES); Technical Characteristics, Test Conditions and Methods of Measurement for Radio Aspects of Cordless Telephones CTI
• ETSI ETS 300 394- 1-1996 Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA); Conformance Testing Specification; Part 1: Radio
• ETSI PRETS 300 394-1-1995 Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA); Conformance Testing Specification Part 1: Radio
• ETSI EN 300 394-1-2006 Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio V2.4.1
• ETSI EN 300 394-1-2007 Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio V3.0.1
• ETSI EN 300 394-1-2000 Terrestrial Trunken Radio (TETRA) Conformance Testing Specification; Part 1: Radio V2.2.1
• ETSI EN 300 394-1-2001 Terrestrial Trunked Radio (TETRA); Conformance Testing Specification; Part 1: Radio V2.3.1
• ETSI TS 100 394-1-2000 Terrestrial Trunked Radio (TETRA); Conformance Testing Specification; Part 1: Radio
• ETSI I-ETS 300 235-1994 Radio Equipment and Systems (RES); Technical Characteristics, Test Conditions and Methods of Measurement for Radio Aspects of Cordless Telephones CT1
• ETSI PRETS 300 836-1-1998 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance Testing Specification; Part 1: Radio Type Approval and Radio Frequency (RF) Conformance Test Specification
• ETSI PRETS 300 836-1-1997 Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 Conformance Testing Specification; Part 1: Radio Type Approval and Radio Frequency (RF) Conformance Test Specification
• ETSI TS 102 726-3-2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMRTM); Part 3: Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification (V2.2.1)
• ETSI TS 102 587-6-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 6: Interoperability testing; Test Descriptions (TD)
• ETSI TR 138905 V 16.8.0,3GPP TR 38.905 Version 16. 5G - NR - Derivation of test points for radio transmission and reception User Equipment (UE) conformance test cases (3GPP TR 38.905 version 16.8.0 Release 16)
• ETSI TS 103 302-2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Test Specification for the RFID Interoperability Test Event in Brazil May 2013 (V1.1.1)
• ETSI TS 102 362-2-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
• ETSI TS 102 362-2-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification V1.2.1
• ETSI TS 102 362-2-2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification V1.1.1

American National Standards Institute （ANSI), How to Test Wire Conductivity

• ANSI/ASTM D2633:2013 Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
• ANSI/IEEE 1210:2004 Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable

Institute of Interconnecting and Packaging Electronic Circuits (IPC), How to Test Wire Conductivity

• IPC J-STD-002B-2003 Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC - Association Connecting Electronics Industries, How to Test Wire Conductivity

• IPC/JEDEC J-STD-002D-2013 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
• IPC EIA/IPC/JEDEC J-STD-002E-2017 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
• IPC J-STD-002A-1998 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
• IPC EIA/IPC/JEDEC J-STD-002D CHINESE-2013 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
• IPC/JEDEC J-STD-002D ERTA-2014 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
• IPC J-STD-002-1992 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
• IPC J-STD-002D CD-2013 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
• IPC EIA/IPC/JEDEC J-STD-002D CHINESE-2017 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires

ECIA - Electronic Components Industry Association, How to Test Wire Conductivity

• J-STD-002B-2003 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires

Society of Automotive Engineers (SAE), How to Test Wire Conductivity

• SAE J1113/26-2006 Electromagnetic Compatibility Measurement Procedure for Vehicle Components--Immunity to AC Power Line Electric Fields
• SAE J1113/42-2010 Electromagnetic Compatibility—Component Test Procedure—Part 42—Conducted Transient Emissions

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, How to Test Wire Conductivity

• I-ETS 300 235-1994 Radio Equipment and Systems (RES) Technical Characteristics@ Test Conditions and Methods of Measurement for Radio Aspects of Cordless Telephones CT1

Professional Standard - Post and Telecommunication, How to Test Wire Conductivity

• YD/T 1013-1999 Cabling system for building general electronic performance technical specifications and testing method
• YD/T 1013-2013 General test method for electrical characteristics of integrated wiring system

National Metrological Verification Regulations of the People's Republic of China, How to Test Wire Conductivity

• JJG(电子) 12030-1989 Verification Regulations for VS22 TV Nonlinear Distortion Tester
• JJG(电子) 04029-1989 J273B type linear integrated circuit test system verification regulations

Professional Standard - Speciality, How to Test Wire Conductivity

• ZB G72002-1989 Determination of conductivity of water or aqueous solutions for surfactant tests

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to Test Wire Conductivity

• PREN 3475-505-2010 Aerospace series Cables@ electrical@ aircraft use Test methods Part 505: Tensile test on conductors and strands (Edition P 3)
• PREN 3475-505-2006 Aerospace series Cables@ electrical@ aircraft use Test methods Part 505: Tensile test on conductors and strands (Edition P 2)

ATIS - Alliance for Telecommunications Industry Solutions, How to Test Wire Conductivity

• 0800049-2011 Test Cases for Linear TV Service Selection@ Attachment@ and Usage

Guizhou Provincial Standard of the People's Republic of China, How to Test Wire Conductivity

• DB52/T 726-2011 Guizhou Provincial Energy Conservation Power Generation Dispatch Coal Consumption Online Monitoring System Comparison Test Guidelines

GOSTR, How to Test Wire Conductivity

• GOST IEC 61000-4-31-2019 Electromagnetic compatibility (EMC). Part 4-31. Testing and measurement techniques. AC mains ports broadband conducted disturbance immunity test

Professional Standard - Chemical Industry, How to Test Wire Conductivity

• HG/T 3506-1999 Surface active agents.Determination of electrical conductivity of water or aqueous solutions for tests

National Association of Corrosion Engineers (NACE), How to Test Wire Conductivity

• NACE RP0188-1999 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

CENELEC - European Committee for Electrotechnical Standardization, How to Test Wire Conductivity

• EN 60749-26:2006 Semiconductor devices - Mechanical and climatic test methods Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM)
• EN 61174:2008 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements@ methods of testing and required test results

Others:   How to test electrical conductivity, How to Test Wire Conductivity.