ZH
RU
ES
Test method for flexural strength of plastics
Test method for flexural strength of plastics, Total:498 items.
In the international standard classification, Test method for flexural strength of plastics involves: Measurement of force, weight and pressure, Reinforced plastics, Glass, Materials for aerospace construction, Ceramics, Pipeline components and pipelines, Construction materials, Plastics, Raw materials for rubber and plastics, Wood-based panels, Insulating materials, Piezoelectric and dielectric devices, Solar energy engineering, Gears, Cellular materials, Mining and quarrying, Insulating fluids, Semiconducting materials, Structures of buildings, Inorganic chemicals, Paints and varnishes, Rubber and plastics products, Elements of buildings, Wood, sawlogs and sawn timber, Products of the textile industry, Kitchen equipment, Leather technology, Semi-manufactures of timber, Welding, brazing and soldering, Valves, Materials for the reinforcement of composites, Rubber, Textile machinery, Testing of metals, Protection of and in buildings, Adhesives, Mechanical testing, Waxes, bituminous materials and other petroleum products, External sewage systems, Paper and board, Aerospace electric equipment and systems, Earthworks. Excavations. Foundation construction. Underground works, Road vehicle systems, Textile fibres, Equipment for the metallurgical industry, Equipment for the chemical industry, Integrated circuits. Microelectronics, Medical equipment.
Professional Standard - Aerospace, Test method for flexural strength of plastics
- QJ 2199-1991 Test method for flexural strength of rigid foamed plastics
- QJ 1869-1990 Test method for flexural properties of small specimens of fiber-reinforced plastic sheets
- QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Test method for flexural strength of plastics
- PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
- PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)
Group Standards of the People's Republic of China, Test method for flexural strength of plastics
- T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
- T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
- T/CSRA 12-2021 Test method for flexural properties of aramid fiber Ⅲ reinforced materials
- T/CSEB 0006-2018 Testing method for determining dynamic fracture toughness of rock materials by the Notched Semi-circular Bending specimen
British Standards Institution (BSI), Test method for flexural strength of plastics
- BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
- BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
- BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
- BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
- BS EN 12372:2006 Natural stone test methods — Determination of flexural strength under concentrated load
- BS EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
- BS 2782-3 Method 323B:1996 Methods of testing plastics. Mechanical properties. Flexural vibration. Non-resonance method
- 18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
- BS EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - 'Simplified bending test' method
- BS EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength, "complete bending test" method
- BS EN 1704:1997 Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending
- BS DD 86-1:1983 Damp-proof courses - Methods of test for flexural bond strength and short term shear strength
- BS EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural
strength (bending)
- BS EN 2562:1997 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
- BS ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
- BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
- 21/30403937 DC BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
- BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
- BS EN 772-6:2001 Methods of test for masonry units - Determination of bending tensile strength of aggregate concrete masonry units
- BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
- BS EN 12372:2022 Tracked Changes. Natural stone test methods. Determination of flexural strength under concentrated load
- BS 2782 Pt.3 Meth.335A:1993 Test methods for plastics. Part 3: Mechanical properties. Test method 335A: Determination of bending properties
- BS EN ISO 32100:2018 Tracked Changes. Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method
- BS ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength
- BS EN ISO 75-1:2004 Plastics - Determination of temperature of deflection under load - General test method
- BS EN ISO 75-1:2020 Tracked Changes. Plastics. Determination of temperature of deflection under load. General test method
- 19/30376356 DC BS EN ISO 8659. Thermoplastics valves. Fatigue strength. Test method
- BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method
- BS EN ISO 8659:2020 Tracked Changes. Thermoplastics valves. Fatigue strength. Test method
- BS EN ISO 75-1:2013 Plastics. Determination of temperature of deflection under load. General test method
- BS 2782-3 Method 341A:1977 Methods of testing plastics - Mechanical properties - Determination of apparent interlaminar shear strength of reinforced plastics
- BS 3531-23.1:1991 Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
- BS EN 13892-9:2018 Methods of test for screed materials - Determination of flexural and compressive strength
- BS EN 13161:2001 Natural stone test methods - Determination of flexural strength under constant moment
- BS EN 13892-2:2014 Methods of test for screed materials - Determination of flexural and compressive strength
- BS EN 13892-2:2002 Methods of test for screed materials - Determination of flexural and compressive strength
- BS EN 1015-11:1999 Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar
- BS EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment
Japanese Industrial Standards Committee (JISC), Test method for flexural strength of plastics
- JIS K 7074:1988 Testing methods for flexural properties of carbon fiber reinforced plastics
- JIS K 7096:2017 Test method for through-thickness tensile properties of carbon fibre reinforced plastics -- Flexure method
- JIS K 7116:1987 Testing method for flexural creep of plastics
- JIS K 7055:1995 Testing method for flexural properties of glass fiber reinforced plastics
- JIS K 7221:1995 Testing method for flexural properties of rigid cellular plastics
- JIS A 1106:1993 Method of test for flexural strength of concrete
- JIS R 1624:1995 Testing method for bending strength of fine ceramic joint
- JIS R 1624:2010 Testing method for bending strength of fine ceramic joint
- JIS K 7119:1972 Testing method of flexural fatigue of rigid plastics by plane bending
- JIS R 1664:2004 Testing method for bending strength of porous fine ceramics
- JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
- JIS K 7082:1993 Testing method for complete reversed plane bending fatigue of carbon fibre reinforced plastics
- JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
- JIS R 1663:2017 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites at room temperature
- JIS A 1114:1993 Method of test for compressive strength of concrete using portions of beams broken in flexure
- JIS K 6330-9:1998 Testing methods for rubber and plastics hoses -- Part 9: Bending tests
- JIS K 7088:1996 Testing methods for flexural creep of carbon fibre reinforced plastics
- JIS K 6330-4:2003 Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests
- JIS A 1183:1995 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
- JIS K 7058:1995 Testing method for transverse shear strength of glass fiber reinforced plastics
- JIS K 6545:1994 Testing method for flexing endurance of light leathers and their surface finishes
- JIS K 7214:1985 Testing methods for shear strength of plastics by punch tool
- JIS K 7061:1992 Testing method for charpy impact strength of glass fiber reinforced plastics
- JIS K 7057:1995 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
- JIS K 7080:1991 Testing methods for bearing strength of carbon fiber reinforced plastics
国家市场监督管理总局、中国国家标准化管理委员会, Test method for flexural strength of plastics
Professional Standard - Building Materials, Test method for flexural strength of plastics
- JC/T 676-1997 Test method for flexure of glass material
- JC/T 263-1993 Performance test method for cast stone products. Bending strength test
- JC/T 778-2010 Test method for flexural creep of glass fibre reinforced plastics sheet and sandwich construction with honeycomb core
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test method for flexural strength of plastics
- GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties
- GB/T 4741-1999 Standard test method for bending strength of ceramic materials
- GB/T 8805-1988 Determination of deflection for rigid plastic pipes
- GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
- GB/T 3356-1999 Test method for flexural properties of unidirectional fiber reinforced plastics
- GB/T 1449-1983 Test method for flexural properties of glass fiber-reinforced plastics
- GB/T 9341-2000 Plastics--Determination of flexural properties
- GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
- GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
- GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
- GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
- GB/T 14230-1993 Standard of test methed for bending load capacity of gears
- GB 6569-1986 Testing method for flexural strength of high performance ceramics
- GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
- GB/T 16419-1996 Plastics--Determination of flexural properties by use of small specimens
- GB/T 8812-1988 Test method for bending of rigid cellular plastics
- GB/T 13096.2-1991 Test method for flexural properties of pultruded glass fiber reinforced plastic rods
- GB/T 6619-1995 Test methods for bow of silicon slices
- GB/T 6619-2009 Test method for bow of silicon wafers
- GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
- GB/T 14390-2008 Fine ceramics (advanced ceramics,advanced technical ceramics).Test methos for flexural strength of monolithic ceramics at elevated temperature
- GB/T 7689.4-2001 Reinforcements--Test method for woven fabrics Part 4: Determination of flexural stiffness
- GB/T 7689.4-2013 Reinforcements.Test method for woven fabrics.Part 4: Determination of flexural stiffness
- GB/T 1634-1979 Test method of heat deflection temperature under bending load for plastics
- GB/T 15615-1995 Test method for measuring flexture strength of silicon slices
- GB/T 31353-2014 Test methods for bow of sapphire substrates
- GB/T 14484-1993 Test method for bearing strength of plastics
- GB/T 42667-2023 Test method for iso-biaxial bending strength of fine ceramics at room temperature Double ring method
- GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- GB/T 14235.2-1993 Testing methods for bending strength of pattern materials in investment casting
- GB/T 13465.2-2002 Test method for flexure strength of impermeable graphite materials
- GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool
- GB/T 9966.2-2001 Test methods for natural facing stones Part 2: Dry and wet test methods for flexural strength
- GB/T 42895-2023 Bending strength test method of microelectromechanical system (MEMS) technology silicon-based MEMS microstructure
- GB/T 3854-2005 Test method for hardness of reinforced plastics by means of a Barcol impresser
- GB/T 1450.1-2005 Fibre-reinforced plastic composites-Determination of interlaminar shear strength
- GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials
PL-PKN, Test method for flexural strength of plastics
- PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus
AENOR, Test method for flexural strength of plastics
- UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
- UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
- UNE-EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
- UNE-EN 1704:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER TEMPERATURE CYCLING UNDER BENDING.
- UNE-EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
- UNE-EN 28659:1992 THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (ISO 8659:1989)
- UNE-EN 2562:1997 AEROSPACE SERIES. CARBON FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. FLEXURAL TEST PARALLEL TO THE FIBRE DIRECTION.
- UNE-EN 12100:1998 PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO BENDING BETWEEN SUPPORTS.
- UNE-EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
未注明发布机构, Test method for flexural strength of plastics
- BS 2782-10-Method 1008B:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008B : Determination of flexural strength on rods made of roving - reinforced resin
- BS 1881-118:1983(1998) Testing concrete — Part 118 : Method for determination of flexural strength
- BS EN 2562:1997(1999) Carbonfibre reinforced plastics — Unidirectional laminates — Flexural test parallel to the fibre direction
- BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
- DIN EN 1015-11:1999 Test method for mortar for masonry DIN Part 11: Determination of bending tensile and compressive strength
Professional Standard - Light Industry, Test method for flexural strength of plastics
- QB/T 2803-2006 Method for measuring bending degree of rigid plastic pipes
Lithuanian Standards Office , Test method for flexural strength of plastics
- LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
- LST EN 1533-2010 Wood flooring - Determination of bending strength under static load - Test methods
- LST EN 1170-5-2003 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
- LST EN 1170-4-2000 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
- LST EN 12372-2007 Natural stone test methods - Determination of flexural strength under concentrated load
- LST EN 1704-2002 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
- LST EN 28659-2001 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989)
- LST EN 13892-2-2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
Danish Standards Foundation, Test method for flexural strength of plastics
- DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
- DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
- DS/EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
- DS/EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, ""Complete bending test"" method
- DS/EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, ""Simplified bending test"" method
- DS/EN 12372:2007 Natural stone test methods - Determination of flexural strength under concentrated load
- DS/EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
- DS 438.15:1984 Test method for the structural use of brickwork. Determination of the tensile strength in bending of brickwork
- DS/EN 13892-2:2003 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
German Institute for Standardization, Test method for flexural strength of plastics
- DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- DIN EN 1052-2:1999 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:1999
- DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
- DIN EN 14617-2:2016-09 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
- DIN 53864:1978-08 Testing of textiles; determination of the bending strength, method according to Schlenker
- DIN EN 1533:2010-12 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
- DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
- DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN EN 1704:1997-03 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
- DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
- DIN EN 1170-5:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
- DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
- DIN EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
- DIN EN 12372:2022-05 Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2022
- DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
- DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
- DIN EN ISO 8659:2020-07 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020
- DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
- DIN EN 772-6:2002 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; German version EN 772-6:2001
- DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
- DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
- DIN EN ISO 32100:2019-02 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018); German version EN ISO 32100:2018
- DIN EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
- DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
- DIN EN 1052-2:2016 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:2016
- DIN EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
- DIN EN 2562:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997
- DIN 51030:2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
- DIN EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods; German version EN 1533:2010
- DIN EN ISO 13783:1998-07 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997
- DIN EN 13161:2008-08 Natural stone test methods - Determination of flexural strength under constant moment; German version EN 13161:2008
- DIN EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment; English version of DIN EN 13161:2008-08
- DIN EN 2562:1997-05 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997
Professional Standard - Chemical Industry, Test method for flexural strength of plastics
- HG/T 4283-2011 Testing method for bending of plastic welding specimens
- HG/T 3840-2006 Plastics. Determination of flexural properties by use of small specimens
- HG/T 3839-2006 Testing methods for shear strength of plastics by punch tool
Korean Agency for Technology and Standards (KATS), Test method for flexural strength of plastics
- KS M 3382-2004 Testing methods for flexural properties of glass fiber reinforced plastics
- KS M 3036-2016 Testing method of flexural fatigue of rigid plastics by plane bending
- KS M 3036-2016(2021) Testing method of flexural fatigue of rigid plastics by plane bending
- KS M 3044-1988(1998) TESTING METHOD FOR FLEXURAL CREEP OF PLASTICS
- KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
- KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
- KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
- KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
- KS M ISO 458-1:2007 Plastics－Determination of stiffness in torsion of flexible materials－Part 1：General method
- KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
- KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
- KS M 3830-1997 TESTING METHODS FOR FLEXURAL PROPERTIES OF RIGID CELLULAR PLASTICS
- KS M 3830-1987 TESTING METHODS FOR FLEXURAL PROPERTIES OF RIGID CELLULAR PLASTICS
- KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
- KS F 2211-2004 Method of impact bending test for wood
- KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
- KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
- KS F 2413-2015 Method of test for compressive strength of concrete using portions of beams broken in flexure
- KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
- KS F 2408-2000 Method of test for flexural strength of concrete
- KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
- KS M 7123-1993 Testing Method for Stiffness of Paper by Bending Load
- KS M 3708-2002 Testing method for bearing strength of carbon fiber reinforced plastics
- KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
- KS M 3816-1997 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
- KS M 3816-1982 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
- KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
- KS F 2232-2016 Testing method for bending strength of polystyrene composite wood wool cement boards
- KS M 3084-2003 TESTING METHOD FOR LZOD IMPACT STRENGTH OF GLASS FIBER REINFORCED PLASTICS
- KS F 2326-2002(2017) Testing method for compressive strength of soil－cement using portions of beam broken in flexure
- KS M 3819-2011 Plastics－Determination of resistance to environmental stress cracking(ESC)－Bent strip method
- KS M 3019-2018 Testing methods for shear strength of plastics by punch tool
- KS M ISO 15108-2009(2019) Adhesives－Determination of strength of bonded joints using a bending-shear method
- KS F 2390-2009 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
- KS M ISO 3597-2:2012 Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
- KS F 2413-1995 Testing method for compressive strength of concrete using portions of beams broken in flexure
- KS F 2483-2014 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
- KS M 3708-2014 Testing method for bearing strength of carbon fiber reinforced plastics
- KS M ISO 3597-2:2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
- KS T 1317-2014 Test for impact resistance of plastic film
- KS T 1317-1976 Test for impact resistance of plastic film
- KS M 3708-2002(2012) Testing method for bearing strength of carbon fiber reinforced plastics
- KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure
RU-GOST R, Test method for flexural strength of plastics
- GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
- GOST 4648-2014 Plastics. Method of static bending test
- GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
- GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
- GOST 16483.3-1984 Wood. Method of static bending strength determination
- GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
- GOST 18564-2017 Rigid cellular plastics. Static bending test method
- GOST 11262-1980 Plastics. Tensile strength test method
- GOST 17302-1971 Plastics. Method of test for shear strength
- GOST 28791-1990 Rubber- or plastics-coated fabrics. Determination of resistance to damage by flexing (dynamic method)
- GOST 31974-2012 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
- GOST 12021-1984 Plastics and ebonite. Method of determination of deflection under load temperature
- GOST 21554.3-1982 Sawn timber and blanks. Method for control of strength at bending, tension and compression
- GOST R 56657-2015 Polymer composites. Method for determination of flexural properties of glass-fibre reinforced pultruded plastic rods
- GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
- GOST 28790-1990 Rubber or plastics-coated fabrics. Determination of flexibility. Flat loop method
- GOST R 57732-2017 Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
- GOST 8462-1985 Wall materials. Methods for determination of ultimate compressive and bending strength
YU-JUS, Test method for flexural strength of plastics
- JUS G.S2.630-1991 Plastics. Determination of stiffness in torsion of flexible materials. General method
American Society for Testing and Materials (ASTM), Test method for flexural strength of plastics
- ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM D790-15e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D790-00 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D790-02 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM D610-85(1989)e1 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
- ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D4476-97 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
- ASTM D4476-03 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
- ASTM D4476-09 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
- ASTM D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
- ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics
- ASTM D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
- ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
- ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D6109-19 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
- ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
- ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
- ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
- ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
- ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
- ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
- ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
- ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
- ASTM D3846-94 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
- ASTM D3846-02 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
- ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
- ASTM D6395-10 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
- ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
- ASTM D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
- ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
- ASTM C1499-02 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C149-86(2000) Standard Test Method for Thermal Shock Resistance of Glass Containers
- ASTM C1499-08 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
- ASTM C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
- ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
- ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM D3929-03(2010)e1 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
- ASTM D4032-94 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-94(2001) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-08 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-08(2012) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
- ASTM D953-10 Standard Test Method for Bearing Strength of Plastics
- ASTM D953-09 Standard Test Method for Bearing Strength of Plastics
- ASTM D953-95 Standard Test Method for Bearing Strength of Plastics
- ASTM D953-02 Standard Test Method for Bearing Strength of Plastics
- ASTM D2290-19 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
- ASTM D2290-19a Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
- ASTM D2290-16 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
American National Standards Institute （ANSI), Test method for flexural strength of plastics
Standard Association of Australia （SAA）, Test method for flexural strength of plastics
- AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
- AS 2498.4:1993 Methods of testing rigid cellular plastics - Determination of cross-breaking strength
- AS/NZS 4257.9:1995 Plastic roof and wall cladding materials - Methods of test - Determination of transverse bending stiffness
- AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
- AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittings - Method for determination of bond strength
- AS/NZS 3572.22:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of hardness by means of a Barcol impressor
- AS/NZS 3572.24:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial hoop tensile strength by means of a tensile plate test
- AS/NZS 3572.23:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial longitudinal tensile strength by means of a tensile plate test
- AS/NZS 4266.10(Int):2001 Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70 degrees Celsius or boiling temperature
Association Francaise de Normalisation, Test method for flexural strength of plastics
- NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
- NF EN ISO 17707:2005 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion
- NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
- NF P12-702-2*NF EN 1052-2:2016 Methods of test for masonry - Part 2 : determination of flexural strength
- NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
- NF EN 13892-2:2003 Méthodes d'essai des matériaux pour chapes - Partie 2 : détermination de la résistance à la flexion et à la compression
- NF EN 13161:2008 Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant
- NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
- NF EN 2746:1998 Série aérospatiale - Plastiques renforcés au verre textile - Essai de flexion. Méthode des trois pannes.
- NF EN 14617-2:2016 Pierre agglomérée - Méthodes d'essai - Partie 2 : détermination de la résistance à la flexion (traction)
- NF EN ISO 17694:2016 Chaussures - Méthodes d'essai pour les tiges et les doublures - Résistance à la flexion
- NF P19-829-5*NF EN 1170-5:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, ""Complete bending test"" method.".
- NF B10-621*NF EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
- NF EN 14651+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
- NF EN 14651/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
- NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
- NF B10-621:2007 Natural stone test methods - Determination of flexural strength under concentrated load.
- NF T57-303:1989 PLASTICS. CARBON REINFORCED COMPOSITES. DETERMINATION OF INTERLAMINAR SHEAR STRENGTH. FLEXURE METHOD WITH SHORT SPAN LENGHT.
- NF P14-204-2*NF EN 13892-2:2003 Methods of test for screed materials - Part 2 : determination of flexural and compressive strength
- NF T57-160-2*NF ISO 3597-2:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2 : determination of flexural strength.
- NF EN 1680:1997 Systèmes de canalisations en plastique - Robinets pour les systèmes de canalisations en polyéthylène (PE) - Méthode d'essai d'étancheité sous et après une flexion appliquée au mécanisme d'entraînement.
- NF T54-084*NF EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method
- NF T54-921*NF EN 1704:1997 Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.
- NF P12-106*NF EN 772-6:2002 Methods of test for masonry units - Part 6 : determination of bending tensile strength of aggregate concrete masonry units
- NF B10-625*NF EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment.
- NF EN 2562:1997 Série aérospatiale - Plastiques renforcés de fibres de carbone. Stratifiés unidirectionnels. Essai de flexion parallèle à la direction des fibres
European Association of Aerospace Industries, Test method for flexural strength of plastics
- AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1
- AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
Aerospace, Security and Defence Industries Association of Europe (ASD), Test method for flexural strength of plastics
- ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
European Committee for Standardization (CEN), Test method for flexural strength of plastics
- EN 12372:2006 Natural stone test methods - Determination of flexural strength under concentrated load
- EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
- EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
- EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
- EN 1052-2:1999 Methods of Test for Masonry - Part 2: Determination of Flexural Strength
- EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
- FprEN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
- EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]
- EN 1170-5:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
- EN 1170-4:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
- EN 1052-2:2016/AC:2016 Methods of test for masonry - Part 2: Determination of flexural strength
- prEN 772-6-1992 Methods of test for masonry units; part 6: determination of bending tensile strength of concrete masonry units
- EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
- EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
- EN 2562:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
- EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment
- EN 13161:2001 Natural Stone Test Methods - Determination of Flexural Strength under Constant Moment
- EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
CEN - European Committee for Standardization, Test method for flexural strength of plastics
- EN 12372:1999 Natural Stone Test Methods - Determination of Flexural Strength Under Concentrated Load
- EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
PT-IPQ, Test method for flexural strength of plastics
- NP 2255-1988 Plastics Rigid cellular plastics. Bending test
- NP EN 1876-1-2000 Rubber-or plastics-coated fabrics Low temperature tests Part 1:Bending test
International Organization for Standardization (ISO), Test method for flexural strength of plastics
- ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
- ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
- ISO 3597-2:1993 Textile-glass-reinforced plastics; determination of mechanical properties on rods made of roving-reinforced resin; part 2: determination of flexural strength
- ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength
- ISO 8659:1989 Thermoplastics valves; fatigue strength; test method
- ISO 8659:2020 Thermoplastics valves — Fatigue strength — Test method
ES-UNE, Test method for flexural strength of plastics
- UNE-EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- UNE-EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
- UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
- UNE-EN ISO 32100:2019 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018)
- UNE-EN 12372:2022 Natural stone test methods - Determination of flexural strength under concentrated load
- UNE-EN ISO 8659:2021 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
CZ-CSN, Test method for flexural strength of plastics
- CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination
- CSN 26 9308-1983 Plastic crates. Testing method of fixed handle strenght
- CSN 34 6314-1985 Testing of ceramic electrotechnic materials. Method of the determination of the bending strenght
- CSN 34 6315-1984 Testing of ceramic elektrotechnic materials. Method of the determination of the impulse flexural strenght
Professional Standard - Automobile, Test method for flexural strength of plastics
- QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method
VN-TCVN, Test method for flexural strength of plastics
- TCVN 4032-1985 Cements.Test methods of bending and compression strengths
- TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
- TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength
Guangdong Provincial Standard of the People's Republic of China, Test method for flexural strength of plastics
- DB44/T 1100.2-2012 Test methods for artificial stone: Part 2 Determination of bending strength
Professional Standard - Aviation, Test method for flexural strength of plastics
- HB 5434.6-2004 Test methods for aircraft wheel friction materials-Part 6:Test method for bend strength
- HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes
- HB 5295-1984 Kiscc test method for cantilever-bending pre-cracked specimens of high-strength alloys
- HB 5350.3-1986 Method for determination of flexural strength of investment casting mold materials
- HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates
BE-NBN, Test method for flexural strength of plastics
Association of German Mechanical Engineers, Test method for flexural strength of plastics
Indonesia Standards, Test method for flexural strength of plastics
Professional Standard - Machinery, Test method for flexural strength of plastics
- JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method
- JB/T 6543-1993 Plane bending fatigue characteristic of hard plastic sheet - Test method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test method for flexural strength of plastics
- GB/T 35160.2-2017 Test methods for agglomerated stone—Part 2：Determination of flexural strength
- GB/T 3854-2017 Test method for hardness of reinforced plastics by means of a Barcol impresser
NZ-SNZ, Test method for flexural strength of plastics
- AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)
- AS/NZS 3572.21:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 21: Method for the Determination of the Shear Strength of a Sandwich Panel
- AS/NZS 3572.19:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 19: Method for the Determination of the Lap Shear Strength of Laminate
- AS/NZS 3572.20:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 20: Method for the Determination of the Peel Strength of the Bond between Laminate Layers
工业和信息化部, Test method for flexural strength of plastics
- JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature
- JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method
- HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing
IN-BIS, Test method for flexural strength of plastics
AT-ON, Test method for flexural strength of plastics
- OENORM EN 12372-2021 Natural stone test methods - Determination of flexural strength under concentrated load
Professional Standard - Textile, Test method for flexural strength of plastics
SE-SIS, Test method for flexural strength of plastics
AASHTO - American Association of State Highway and Transportation Officials, Test method for flexural strength of plastics
- TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
- T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
- TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
- T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
- T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
- T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
GOSTR, Test method for flexural strength of plastics
- GOST 12021-2017 Plastics and ebonite. Method for determination of temperature of deflection under load
- GOST R 58527-2019 Wall materials. Methods for determination of ultimate compressive and bending strength
HU-MSZT, Test method for flexural strength of plastics
Malaysia Standards, Test method for flexural strength of plastics
- MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending
KR-KS, Test method for flexural strength of plastics
- KS F 2326-2022 Test method for compressive strength of soil cement using portions of beam broken in flexure
- KS K 0855-2018(2023) Test method of resistance to damage by flexing for rubber or plastics coated fabric
- KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
- KS M ISO 3597-2-2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
RO-ASRO, Test method for flexural strength of plastics
- STAS 5162/5-1973 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEA'IH. Melhods o{ bending test
Society of Automotive Engineers (SAE), Test method for flexural strength of plastics
- SAE J949-2003 Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates
- SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE - SAE International, Test method for flexural strength of plastics
- SAE J949-1981 Test Method for Determining Stiffness (Modulus of Bending) of Fiberboards@ Standard (August 1981)
The American Road & Transportation Builders Association, Test method for flexural strength of plastics
- AASHTO T 140-1997(R2009) Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
- AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
- AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
- AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
VE-FONDONORMA, Test method for flexural strength of plastics
GM Daewoo, Test method for flexural strength of plastics
CU-NC, Test method for flexural strength of plastics
- NC 10-27-1984 Powder Metallurgy. Determination of Plexural Strength. Testing Method
TR-TSE, Test method for flexural strength of plastics
- TS 3287-1979 STANDARD METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE