ZH
RU
ES
metal stripping agent
metal stripping agent, Total:498 items.
In the international standard classification, metal stripping agent involves: Analytical chemistry, Powder metallurgy, Testing of metals, Construction materials, Elements of buildings, Leather technology, Ferroalloys, Non-ferrous metals, Coals, Fuels, Products of the chemical industry, Surface treatment and coating, Linear and angular measurements, Environmental protection, Paints and varnishes, Adhesives, Machine tool systems, Coatings and related processes used in aerospace industry, Materials for aerospace construction, Fluid storage devices, Power transmission and distribution networks, Energy and heat transfer engineering in general, Processes of the textile industry, Test conditions and procedures in general, Items of art and handicrafts, Paint ingredients, Corrosion of metals, Products of non-ferrous metals, Nuclear energy engineering, Non-metalliferous minerals, Terminology (principles and coordination), Road vehicle systems, Aerospace electric equipment and systems, Lubricants, industrial oils and related products, Footwear, Petroleum products in general, Sterilization and disinfection, Welding, brazing and soldering, Materials and articles in contact with foodstuffs, Water quality, Cutting tools, Food products in general, Products of the textile industry, Protection against fire, Valves, Aerosol containers, Inorganic chemicals, Metalliferous minerals, Biology. Botany. Zoology, Microbiology.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal stripping agent
- GB/T 10726-1989 Chemical reagent--General method for the determination of metals by solvent extraction followed by AAS
- GB/T 10726-2007 Chemical reagent.General method for the determination of metals by solvent extraction followed by AAS
- GB/T 4702.18-2020 Chromiun metal—Determination of vanadium content—Tantalum reagent trichloromethane extraction spectrophtometry method
- GB/T 8643-2002 Lubricated metal-powder mixes--Determination of lubricant content--Modified Soxhlet extraction method
- GB/T 13353-1992 Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
- GB/T 14567-1993 Specification and type for reverse domed metallic bursting discs
- GB/T 238-2002 Metallic materials-Wire-Reverse bend test
- GB/T 238-2013 Metallic materials.Wire.Reverse bend test
- GB/T 7749-1987 Test method of cleavage strength of adhesive (metal to metal)
- GB 7749-1987 Test Method for Splitting Strength of Adhesives (Metal to Metal)
- GB/T 7124-1986 The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
- GB/T 7750-1987 The method of creep properties of adhesive in shear by tension loading (metal to metal)
- GB 7750-1987 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
- GB/T 235-2013 Metallic materials.Sheet and strip.Reverse bend test
- GB/T 31311-2014 Metallurgical-grade fluorspar.Determination of lead content.Solvent extraction atomic absorption spectrometric method
- GB/T 31312-2014 Metallurgical grade fluorspar.Determination of antimony content.Solvent extraction atomic absorption spectrometric method
- GB/T 38498-2020 Evaluation method for determining metal corrosion of disinfectant
- GB/T 223.14-2000 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
- GB/T 9735-1988 Chemical reagent--General method for the determination of heavy metals
- GB/T 5009.74-2003 Method for limit test of heavy metals in food additives
- GB/T 25495-2010 Test methods for metal releasing characteristics of getters
- GB/T 9735-2008 Chemical reagent.General method for the determination of heavy metals
- GB/T 12789.4-1994 Criteria for nuclear reactor instrumentation. Part four: Liquid-metal cooled fast reactors
- GB/T 12789.4-94 Nuclear Reactor Instrumentation Guidelines Part IV: Liquid Metal Cooled Fast Reactors
- GB/T 10267.6-1988 Method for analysis of calcium metal--The determination of iron,nickel,copper and manganese in calcium metal by atomic absorption spectrophotometry after extractive separation
- GB 10267.4-1988 Calcium Metal Analysis Method 8-Hydroxyquinoline-Chloroform Extraction Spectrophotometric Determination of Aluminum
- GB/T 10267.4-1988 Method for analysis of calcium metal--The determination of aluminium by oxine chloroform extraction photometric method
国家市场监督管理总局、中国国家标准化管理委员会, metal stripping agent
- GB/T 8643-2021 Determination of lubricant content in lubricated metal-powder mixes—Soxhlet extraction method
- GB/T 22930.1-2021 Leather and fur—Chemical determination of metal content—Part 1:Extractable metals
- GB/T 37623-2019 Corrosion of metals and alloys—Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
Professional Standard - Agriculture, metal stripping agent
- GB 10726-1989 General method for the determination of metal impurities by chemical reagent solvent extraction-atomic absorption spectrometry
- GB/T 238-1984 Test method for repeated bending of metallic materials
- GB 9735-1988 General method for the determination of heavy metals in chemical reagents
- GB/T 8451-1987 Test method for the limit of heavy metals in food additives
SE-SIS, metal stripping agent
Korean Agency for Technology and Standards (KATS), metal stripping agent
AENOR, metal stripping agent
- UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
- UNE-EN ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011)
- UNE-EN ISO 3543:2001 Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method. (ISO 3543:2000).
- UNE-EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
- UNE 146507-1:1999 EX TEST FOR AGGREGATES. DETERMINATION OF THE POTENTIAL REACTIVITY OF AGGREGATES. CHEMICAL METHOD. PART 1: DETERMINACION OF THE REACTIVITY ALKALI-SILICA AND ALKALI-SILICATE.
- UNE-EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- UNE-EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
German Institute for Standardization, metal stripping agent
- DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
- DIN ISO 9649:1993 Metallic materials; wire; reverse torsion test; identical with ISO 9649:1990
- DIN EN ISO 17072-1:2019-07 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2019); German version EN ISO 17072-1:2019
- DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
- DIN ISO 9649:2018 Metallic materials - Wire - Reverse torsion test (ISO 9649:2016)
- DIN EN ISO 17072-1:2019 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2019)
- DIN 54233-2:2014-07 Testing of textiles - Determination of metals - Part 2: Determination of extractable metals by hydrochloric acid
- DIN ISO 9649:2018-01 Metallic materials - Wire - Reverse torsion test (ISO 9649:2016)
- DIN EN ISO 3543:2001-12 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000
- DIN EN ISO 3543:2001 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000
- DIN 54233-4:2014-07 Testing of textiles - Determination of metals - Part 4: Determination of extractable metals by synthetic salivary solution
- DIN EN ISO 13944:2013 Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO 13944:2012); German version EN ISO 13944:2012
- DIN EN ISO 13944:2012 Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO/FDIS 13944:2011); German version FprEN ISO 13944:2011
- DIN ISO 7801:2008-10 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
- DIN EN 12205:2001 Transportable gas cylinders - Non refillable metallic gas cylinders; German version EN 12205:2001
- DIN EN ISO 10270:2022-05 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022); German version EN ISO 10270:2022
- DIN 54455:2016 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
- DIN 54455:1984 Testing of adhesives for metals and of bonded metal joints; torsional shear test
- DIN 51367:1991 Testing of metal working fluids; determination of the stability of emulsified metal working fluids in hard water
- DIN 54455:2016-09 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
- DIN EN 2243-2:2006-10 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
- DIN 51521:1999 Lubricants - Metal working fluids - Water mix metal working fluids SE; specifications
- DIN 54452:1981 Testing of adhesives for metals and adhesively bonded metal joints; compression shear test
- DIN EN ISO 4491-4:2012 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
- DIN EN ISO 3543 Berichtigung 1:2006-07 Metallic and other inorganic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000), Corrigenda to DIN EN ISO 3543:2001-12; German version EN ISO 3543:2000/AC:2006
- DIN 53287:2006 Testing of adhesives for metals and adhesively bonded metal joints - Determination of the resistance to liquids
- DIN 53287:2018-07 Testing of adhesives for metals and adhesively bonded metal joints - Determination of the resistance to liquids
- DIN EN ISO 4491-4:2019-09 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2019); German version EN ISO 4491-4:2019 / Note: Applies in conjunction with DIN ISO 4491-1 (1990-06).
- DIN EN 13479:2017-10 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2017
- DIN 51385:1991 Lubricants; metal working fluids; terms
- DIN EN ISO 7539-10:2020-09 Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2020); German version EN ISO 7539-10:2020
- DIN EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
- DIN EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
- DIN EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture; English version of DIN EN 15006:2006-12
- DIN EN ISO 10270:2020 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO/DIS 10270:2020); German and English version prEN ISO 10270:2020
- DIN EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2004
ES-UNE, metal stripping agent
- UNE 7469:2003 ERRATUM METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
- UNE-EN ISO 17072-1:2020 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2019)
- UNE-EN ISO 3543:2001/AC:2007 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003)
- UNE 146512:2018 Test for aggregates. Determination of the potential reactivity of aggregates. Chemical method. Determination of the reactivity alkali-silica and alkali-silicate.
- UNE-EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
- UNE-EN ISO 4491-4:2020 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2019)
- UNE-EN 13479:2018 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
- UNE-EN ISO 7539-10:2021 Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2020)
- UNE-EN 4507:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water extractable matter (Endorsed by AENOR in August of 2013.)
British Standards Institution (BSI), metal stripping agent
- BS ISO 9649:2023 Metallic materials. Wire. Reverse torsion test
- BS EN ISO 17072-1:2019 Tracked Changes. Leather. Chemical determination of metal content. Extractable metals
- BS ISO 9649:2016 Metallic materials. Wire. Reverse torsion test
- BS ISO 1952:2008 Solid mineral fuels. Determination of extractable metals in dilute hydrochloric acid
- BS ISO 7539-10:2013 Corrosion of metals and alloys. Stress corrosion testing. Reverse U-bend method
- BS EN ISO 7539-10:2020 Corrosion of metals and alloys. Stress corrosion testing - Reverse U-bend method
- BS EN ISO 4491-4:2019 Tracked Changes. Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction
- BS ISO 10270:1996 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- BS EN ISO 10270:1996 Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- BS EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- BS EN ISO 10270:2022 Tracked Changes. Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- 20/30402751 DC BS EN ISO 10270. Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- BS EN ISO 4491-4:2013 Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction
- BS EN ISO 13944:2012 Lubricated metal-powder mixes. Determination of lubricant content. Soxhlet extraction method
- BS EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
- BS EN 4507:2013 Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water extractable matter
- BS EN 16057:2012 Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method
- BS EN 13479:2004 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
- BS EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
U.S. Air Force, metal stripping agent
Group Standards of the People's Republic of China, metal stripping agent
International Organization for Standardization (ISO), metal stripping agent
- ISO 13944:2012 Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method
- ISO 13944:1996 Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method
- ISO 17072-1:2019 Leather — Chemical determination of metal content — Part 1: Extractable metals
- ISO 17072-1:2019 | IULTCS/IUC 27-1 Leather — Chemical determination of metal content — Part 1: Extractable metals
- ISO 17072-1:2011 | IULTCS/IUC 27-1 Leather — Chemical determination of metal content — Part 1: Extractable metals
- ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals
- ISO 4495:1978 Lubricated metallic powders; Determination of lubricant content; Soxhlet extraction method
- ISO 1952:2008 Solid mineral fuels - Determination of extractable metals in dilute hydrochloric acid
- ISO 3543:1981 Metallic and non-metallic coatings; Measurement of thickness; Beta backscatter method
- ISO 9649:2016 Metallic materials - Wire - Reverse torsion test
- ISO 7801:1984 Metallic materials; Wire; Reverse bend test
- ISO 9649:1990 Metallic materials; wire; reverse torsion test
- ISO/CD 7801 Metallic materials — Wire — Reverse bend test
- ISO 9649:2023 Metallic materials — Wire — Reverse torsion test
- ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
- ISO/CD 1952:1976 Solid mineral fuels — Determination of extractable metals in dilute hydrochloric acid
- ISO 3543:2000/Cor 1:2003 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1
- ISO 2767:1973 Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity
- ISO 10270:2022 Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- ISO/TR 7655:2022 Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
- ISO 10270:1995 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- ISO 9779:1990 Metallurgical-grade fluorspar — Determination of lead content — Solvent extraction atomic absorption spectrometric method
- ISO 9779:1993 Metallurgical-grade fluorspar; determination of lead content; solvent extraction atomic absorption spectrometric method
- ISO 9504:1993 Metallurgical-grade fluorspar; determination of antimony content; solvent extraction atomic absorption spectrometric method
- ISO 4588:1995 Adhesives - Guidelines for the surface preparation of metals
- ISO 4588:1989 Adhesives; preparation of metal surfaces for adhesive bonding
- ISO 9504:1990 Metallurgical-grade fluorspar — Determination of antimony content — Solvent extraction atomic absorption spectrometric method
- ISO 7539-10:2020 Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
- ISO 7539-10:2013 Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method
Association Francaise de Normalisation, metal stripping agent
- NF EN ISO 13944:2013 Mélanges de poudres métalliques lubrifiées - Détermination de la teneur en lubrifiant - Méthode d'extraction au Soxhlet
- NF A95-184*NF EN ISO 13944:2013 Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method
- NF EN ISO 17072-1:2019 Cuir - Détermination chimique de la teneur en métal - Partie 1 : métaux extractibles
- NF A95-184:2006 Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method.
- NF A91-206*NF EN ISO 3543:2001 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method
- NF A91-115:1995 Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method.
- NF A03-403:1990 Metal products - Low-cycle fatigue test
- NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
- NF EN ISO 3543:2001 Revêtements métalliques et non métalliques - Mesurage de l'épaisseur - Méthode par rétrodiffusion des rayons bêta
- NF ISO 2726:1996 Outils pour le travail du bois - Rabots métalliques, fers de rabots et contrefers
- NF A05-401:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors.
- NF EN ISO 4491-4:2019 Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 4 : oxygène total par réduction-extraction
- NF L17-300-2*NF EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2 : peel metal-metal
- NF A05-401*NF EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- NF EN 16711-1:2015 Textiles - Détermination de la teneur en métaux - Partie 1 : dosage des métaux par minéralisation par micro-ondes
- NF P41-041*NF EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- NF EN 13479:2017 Produits consommables pour le soudage - Norme produit générale pour les métaux d'apport et les flux pour le soudage par fusion de matériaux métalliques
- NF H44-042*NF EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
- NF A05-501-10:2015 Corrosion of metals and alloys - Stress corrosion testing - Part 10 : reverse U-bend method
- NF A05-501-10*NF EN ISO 7539-10:2020 Corrosion of metals and alloys - Stress corrosion testing - Part 10 : reverse U-bend method
- NF L17-300-2:1991 Aerospace series. Structural adhesives. Test methods. Part 2 : peel metal-metal.
- NF EN ISO/ASTM 52931:2023 Fabrication additive de métaux - Environnement, santé et sécurité - Principes généraux pour l'utilisation de matériaux métalliques
- NF EN 2243-2:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 2 : essai de pelage métal-métal
- NF P92-505:1995 Safety against fire. Building materials. Reaction to fire tests. Test used for thermalmelting materials. Dripping test.
- NF A81-055:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials.
- NF L17-115*NF EN 4507:2014 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water extractable matter
- NF A95-181-4*NF EN ISO 4491-4:2019 Metallic powders - Determination of oxygen content by reduction methods - Part 4 : total oxygen by reduction-extraction
Professional Standard - Construction Industry, metal stripping agent
- JG/T 402-2013 Roofing products from metal sheet with reflect thermal coating
Professional Standard - Military and Civilian Products, metal stripping agent
- WJ 1852-2004 Specifications for metallic exterior reflectors
Danish Standards Foundation, metal stripping agent
- DS/EN ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals
- DS 10311:1959 Testing of metals. Reverse bend testing of wire. (Determination of number of bends)
- DS/EN ISO 3543:2001 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method
- DS/EN 2243-2:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
- DS/EN ISO 10270:2009 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- DS/EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- DS/EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
- DS/EN ISO 4491-4:2013 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
RU-GOST R, metal stripping agent
- GOST R ISO 17072-1-2015 Leather. Chemical determination of metal content. Part 1. Extractable metals
- GOST R 50708-1994 Wire. Reverse torsion test
- GOST 32983-2014 Solid mineral fuel. Determination of extractable metals in dilute hydrochloric acid
- GOST 17319-1976 Reagents. Methods for the determination of heavy metals
- GOST R EN 13479-2010 Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
- GOST 23273-1978 Metals and alloys. Measurement of shore hardness with method of striker recoil
- GOST 27417-1998 Metallic powders. Determination of total oxygen by reduction - extraction
- GOST 27417-1987 Metal powders. Methods for determination of oxygen
KR-KS, metal stripping agent
- KS I ISO 17072-1-2018 Leather — Chemical determination of metal content — Part 1: Extractable metals
- KS D ISO 10270-2016 Corrosion of metals and alloys-Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
- KS D ISO 4491-4-2003(2023) Metallic powders - Determination of oxygen content by reduction methods Part 4 : Total oxygen by reduction-extraction
- KS E ISO 15249-2021 Zinc sulfide concentrates — Determination of gold content —Acid dissolution/solvent extraction/flame atomic absorption spectrometric method
未注明发布机构, metal stripping agent
- GOST ISO 17072-1-2021 Leather.Chemical determination of metal content.Part 1.Extractable metals
- DIN EN ISO 13944:2006 Metal powder with added lubricant – Determination of the lubricant content – Modified extraction method according to Soxh
- BS EN ISO 3543:2001(2006) Metallic and non - metallic coatings — Measurement of thickness — Beta backscatter method
未注明发布机构, metal stripping agent
- GOST ISO 17072-1-2021 Leather.Chemical determination of metal content.Part 1.Extractable metals
- DIN EN ISO 13944:2006 Metal powder with added lubricant – Determination of the lubricant content – Modified extraction method according to Soxh
- BS EN ISO 3543:2001(2006) Metallic and non - metallic coatings — Measurement of thickness — Beta backscatter method
GM North America, metal stripping agent
- GM 9985509-1989 Sealant - Adhesive, Elastometric, Metal to Metal
- GM GM9020P-1988 Test for Metal to Metal Sealers - Adhesives
- GM 9985303-1994 Sealant - Adhesive, Elastomeric, Metal to Metal
- GM 9981673-2002 Adhesive - Metal-to-Metal Low Strength
- GM 9981989-1989 Adhesive, One-Part, Epoxy, Structural- Metal
- GM GM9901P-1999 Adhesive Sample Preparation for Metallic Substrates
- GM 9985699-2002 Adhesive, Structural Metal, Tape, Expandable
- GM GM6024M-2002 Solder Metals - Rosin Flux Cored Solder
- GM 9985455-1989 Adhesive, One-Part, Structural - Metal
- GM GM9617P-1988 Corrosion Test for Sheet Metal Forming Lubricants
YU-JUS, metal stripping agent
- JUS C.A4.018-1986 Mechanical testing ofmetals. Reverse bend test of wire
- JUS C.A6.038-1991 Metallic and non-metalllc coatings. Heasurement of tbickness. Beta backscatter method
European Committee for Standardization (CEN), metal stripping agent
- EN ISO 13944:2006 Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method
- EN ISO 3543:1994 Metallic and Non-Metallic Coatings - Measurement of Thickness - Beta Backscatter Method (ISO 3543 : 1981)
- EN 12205:2001 Transportable Gas Cylinders - Non-Refillable Metallic Gas Cylinders
- EN ISO 3543:2000/AC:2006 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003)
- EN ISO 10270:2022 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
- EN ISO 10270:2008 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995, including Cor 1:1997)
- EN ISO 3543:2000 Metallic and Non-Metallic Coatings - Measurement of Thickness - Beta Backscatter Method Incorporating Corrigendum April 2006; ISO 3543: 2000
- EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
- FprEN ISO 10270:2021 Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO/FDIS 10270:2021)
- EN 13479:2004 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
- EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
TH-TISI, metal stripping agent
- TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
- TIS 2177-2004 Reverse torsion test for metallic wire [iso title: metallic materials.wire.reverse torsion test]
- TIS 2176-2004 Torsion test for metallic wire [iso title: metallic materials.wire.simple torsion test]
- TIS 1035-1991 Standard for metal polish, liquid
- TIS 1036-1991 Standard for metal polish, pasted
- TIS 2174-2004 Reverse bend test for metallic sheet and strip 3 mm thick or less [iso title: metallic materials.sheet and strip 3 mm thick or less.reverse bend test]
ZA-SANS, metal stripping agent
- SANS 7799:2003 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
- SANS 3543:1981 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method
- SANS 3543:2008 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method
- SANS 7801:2003 Metallic materials - Wire - Reverse bend test
- SANS 1579:2007 Liquid metal polish
- SANS 1952:2009 Solid mineral fuels - Determination of extractable metals in dilute hydrochloric acid
- SANS 1116-2:2005 Retro-reflective number plates for motor vehicles Part 2: Metal
- SANS 1116-2:2003 Retro-reflective number plates for motor vehicles Part 2: Metal
- SANS 1116-1:1996 Retro-reflective registration plates for motor vehicles Part 1: Blanks (metal)
(U.S.) Ford Automotive Standards, metal stripping agent
- FORD ESB-M5P11-A-1991 METALLIZE PLASTIC PARTS, REFLECTORS
- FORD FLTM EU-BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
- FORD FLTM BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
- FORD ESB-M5P8-A-2000 METALLIZE, PLASTIC PARTS - REFLECTORS
- FORD FLTM BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
- FORD FLTM EU-BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
- FORD M5B290-A-1989 METAL CLEANER - IRON PHOSPHATE
- FORD ESK-M2G307-A2-1987 ADHESIVE, POLYURETHANE - METAL TO METAL - HEAT CURING - HOT APPLICABLE
- FORD ESK-M2G365-A2-1995 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT FREE, METAL TO E-COATED METAL, ISOCYANATE COMPONENT
- FORD ESK-M2G365-A1-1995 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT FREE, METAL TO E-COATED METAL, POLYOL COMPONENT
- FORD WSS-M14P18-A-1997 PERFOMANCE, CLEANER, BODY SHEET METAL
- FORD FLTM BU 119-1-2000 INDUCTION CURE TEST FOR METAL BONDING ADHESIVES
- FORD ESK-M2G365-A2-2015 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT FREE, METAL TO E-COATED METAL, ISOCYANATE COMPONENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M5P8-A-2011 METALLIZE PLASTIC PARTS - REFLECTORS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M2G308-A-1987 ADHESIVE, POLYACRYLIC ESTER-METAL/METAL - AIRLESS - EC COATABLE - CLINCH FLANGE
- FORD ESK-M2G365-A1-2015 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT FREE, METAL TO E-COATED METAL, POLYOL PART ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD FLTM BU 119-01-2000 INDUCTION CURE TEST FOR METAL BONDING ADHESIVES
Lithuanian Standards Office , metal stripping agent
- LST EN ISO 17072-1:2011 Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011)
- LST EN ISO 3543:2001 Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method (ISO 3543:2000)
- LST EN 2243-2-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
- LST EN 16057-2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
- LST EN 13479-2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
CZ-CSN, metal stripping agent
Canadian General Standards Board (CGSB), metal stripping agent
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, metal stripping agent
RO-ASRO, metal stripping agent
- STAS SR ISO 9649:1996 Metallic materials. Wire. Reverse torsion test
- STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
- STAS 1177-1974 Tests of metals REVERSE BEND TESTING OF STEEL WIRES
- STAS 9892-1974 Teststs of metals reverse bend testing of copper and copper alloy WIRES
- STAS 10047/1-1981 Metal Welding DETERMINATION OF DIFUSIBLE HYDROGEN IN DEPOSITED METAL WITH COVERED ELECTRODES BY THE METHOD OF EXTRACTION IN VACUUM
- STAS 7737-1990 Tests of metals. Sheets and plates reverse bend test
- STAS 11587-1983 Metal welding FLUX CORED WIRES FOR WELDING AND SURFACING
- STAS 11281/2-1979 Mct&ls tests DETERMINATION OF WELDING METALS COMPATIBILITY WITH THE BASIC METAL FOR CAST WELDING Flux shielded arc welding
- STAS 7335/9-1988 Corrosion protection of underground metallic constructions OUTER CATHODIG PROTECTION AND EARTHING BY METALLIC ACTIVE ANO0ES General specifications
- STAS SR EN 24491-4-1995 Metallic powders. Determination of oxygen content by reduction, methods. Part 4: Total oxygen by reduction-extraction
WRC - Welding Research Council, metal stripping agent
Indonesia Standards, metal stripping agent
HU-MSZT, metal stripping agent
General Motors do Brasil, metal stripping agent
- GMSA EMS 9309663-2011 Metal - metal adhesive - medium resistance - high tixotropy - medium expansion Adesivo metal-metal - m閐ia resist阯cia - alta tixotropia - m閐ia expans鉶 Do Not use on New Programs; No Replacement
- GMSA EMS 9309864-2011 Metal / Metal Adhesive - Medium Cure ? Medium Expansion Adesivo Metal / Metal - M茅dia Cura - M茅dia Expans茫o Revision A; Do Not use on New Programs; No Replacement
Professional Standard - Petrochemical Industry, metal stripping agent
VN-TCVN, metal stripping agent
Professional Standard - Chemical Industry, metal stripping agent
US-FCR, metal stripping agent
U.S. Military Regulations and Norms, metal stripping agent
- ARMY MIL-M-64032 A VALID NOTICE 2-2013 Mine, Anti-Tank, Metalparts for, M131 System
- ARMY MIL-F-45061 E NOTICE 2-1996 FUZE, MINE, AT, NM, M606 PARTS FOR
- ARMY MIL-F-45061 E VALID NOTICE 1-1988 FUZE, MINE, AT, NM, M606 PARTS FOR
- ARMY MIL-F-45061 E (2)-1976 FUZE, MINE, AT, NM, M606 PARTS FOR
- ARMY MIL-F-45061 E-1973 FUZE, MINE, AT, NM, M606 PARTS FOR
- ARMY MIL-M-63394 (3)-1998 MINE, ANTI-TANK: HE M75 METAL PARTS FOR
- ARMY MIL-M-63394 REINST NOTICE 3-1996 MINE, ANTI-TANK: HE M75 METAL PARTS FOR
- ARMY MIL-M-63394 VALID NOTICE 1-1988 MINE, ANTI-TANK: HE M75 METAL PARTS FOR
- ARMY MIL-M-63394-1980 MINE, ANTI-TANK: HE M75 METAL PARTS FOR
- ARMY MIL-F-11247 A NOTICE 5-1997 FUZE, MINE, AT, M603 FUZE, MINE, AT, PRACTICE, M604 METAL PARTS FOR
- ARMY MIL-M-12760 B REINST NOTICE 4-1996 MINE, ANTI-PERSONNEL NON-METALLIC, M14E1 WITH INTEGRAL FUZE PARTS FOR
- ARMY MIL-M-12760 B NOTICE 2-1996 MINE, ANTI-PERSONNEL NON-METALLIC, M14E1 WITH INTEGRAL FUZE PARTS FOR
- ARMY MIL-M-12760 B VALID NOTICE 1-1988 MINE, ANTI-PERSONNEL NON-METALLIC, M14E1 WITH INTEGRAL FUZE PARTS FOR
- ARMY MIL-M-12760 B (1)-1964 MINE, ANTI-PERSONNEL NON-METALLIC, M14E1 WITH INTEGRAL FUZE PARTS FOR
- ARMY MIL-M-12760 B-1963 MINE, ANTI-PERSONNEL NON-METALLIC, M14E1 WITH INTEGRAL FUZE PARTS FOR
- ARMY QPL-48611-7-1992 ADHESIVE SYSTEM EPOXY - ELASTROMERIC, FOR GLASS TO METAL
Professional Standard - Aviation, metal stripping agent
- HB 5175-1996 Metal wire repeated bending test method
- HB 5175-1981 Metal wire repeated bending test method
- HB 5178-1996 Metal sheet (strip) material repeated bending test method
- HB 5178-1981 Metal sheet (strip) material repeated bending test method
- HB 6686-1992 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
- HB 6685-1992 Test Method for Compression Shear Creep Properties of Adhesives (Metal to Metal)
- HB 5218.23-1995 Methods for Chemical Analysis of Aluminum Alloys - Determination of Vanadium Content by Reagent Extraction Spectrophotometry
- HB 5398-1988 Specification for structural adhesives for metal bonding
- HB 5297.5-2001 Titanium Alloy Chemical Analysis Methods Tantalum Reagent Extraction Spectrophotometric Determination of Vanadium Content
- HB 5399-1988 Specification for adhesives for metal honeycomb sandwich structures
- HB/Z 5218.23-2004 Methods for chemical analysis of aluminium alloys-Part 23:Determination of vanadium content by N-benzoyl-N-phenylhydroxylamine extraction spetrophotometric method
United States Navy, metal stripping agent
- NAVY QPL-MMM-A-132-10 NOTICE 2-2010 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
- NAVY QPL-MMM-A-132-2012 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
- NAVY QPL-MMM-A-132-2013 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
- NAVY QPL-MMM-A-132-QPD-2012 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
- NAVY MMM-A-132 B NOTICE 2-2005 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
- NAVY MMM-A-132 B-1994 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
- NAVY QPL-MMM-A-134-QPD-2010 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY QPL-MMM-A-134-2012 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY QPL-MMM-A-134-2013 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY MMM-A-1754 NOTICE 1-2001 ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED
- NAVY MMM-A-1754-1973 ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED
- NAVY MMM-A-138 B-1986 ADHESIVE, METAL TO WOOD, STRUCTURAL
- NAVY MMM-A-134 NOTICE 1-2001 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY MMM-A-134 (1)-1999 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY MMM-A-134-1970 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY QPL-MMM-A-132-10 NOTICE 2-2005 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
- NAVY QPL-MMM-A-132-9 (4)-1991 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
- NAVY QPL-MMM-A-132-9-1988 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
- NAVY QPL-MMM-A-134-11 NOTICE 1-2001 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY QPL-MMM-A-134-10-1997 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
- NAVY UFGS-03 53 14.00 20-2010 LIGHT REFLECTIVE NONFERROUS METALLIC AGGREGATE FLOOR SYSTEM
- NAVY MIL-C-82594 NOTICE 1-1996 CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS
- NAVY MIL-C-82594-1971 CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS
- NAVY QPL-AMS-A-25463-1-2001 ADHESIVE, FILM FORM, METALLIC STRUCTURAL, SANDWICH CONSTRUCTION [Superseded: NAVY QPL-25463 -31, NAVY QPL-25463 -30 (1), NAVY QPL-25463 -30, NAVY QPL-25463 -29, NAVY QPL-25463 -28 (1), NAVY QPL-25463 -28, NAVY QPL-25463 -27, NAVY QPL-25463 -26,
- NAVY MIL-I-17563 C-1992 IMPREGNANTS FOR CAST OR POWDER METAL COMPONENTS
- NAVY MIL-C-8514 C (1)-1999 COATING COMPOUND, METAL PRETREATMENT, RESIN-ACID
- NAVY MIL-C-8514 C-1967 COATING COMPOUND, METAL PRETREATMENT, RESIN-ACID
- NAVY QPL-17563-40-2006 IMPREGNANTS FOR CAST OR POWDER METAL COMPONENTS
- NAVY QPL-MMM-A-134-11 NOTICE 2-2009 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
- NAVY QPL-MMM-A-134-11 NOTICE 2-2010 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
- NAVY QPL-MMM-A-134-11 NOTICE 2 -QPD-2010 ADHESIVES, EPOXY RESIN, METAL STRUCTURAL BONDING
- NAVY MIL-R-46560 A NOTICE 1-1999 REMOVER, AIRCRAFT CANOPY, M3A1, METAL PARTS ASSEMBLY
- NAVY MIL-R-46560 A (1)-1986 REMOVER, AIRCRAFT CANOPY, M3A1, METAL PARTS ASSEMBLY
- NAVY MIL-R-46560 A-1965 REMOVER, AIRCRAFT CANOPY, M3A1, METAL PARTS ASSEMBLY
- NAVY MIL-R-60875 NOTICE 1-1996 REMOVER, AIRCRAFT CANOPY, M8A2 METAL PARTS ASSEMBLY
- NAVY MIL-R-60875 (1)-1987 REMOVER, AIRCRAFT CANOPY, M8A2 METAL PARTS ASSEMBLY
- NAVY MIL-R-60875-1973 REMOVER, AIRCRAFT CANOPY, M8A2 METAL PARTS ASSEMBLY
- NAVY MIL-R-60897 NOTICE 1-1999 REMOVER, AIRCRAFT CANOPY: M8A1 METAL PARTS ASSEMBLY (CONVERSION)
- NAVY MIL-R-60897 (4)-1989 REMOVER, AIRCRAFT CANOPY: M8A1 METAL PARTS ASSEMBLY (CONVERSION)
- NAVY MIL-R-60897-1968 REMOVER, AIRCRAFT CANOPY: M8A1 METAL PARTS ASSEMBLY (CONVERSION)
- NAVY MIL-V-20064 E-1972 VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS
- NAVY QPL-AMS-A-25463-1-2010 ADHESIVE, FILM FORM, METALLIC STRUCTURAL, SANDWICH CONSTRUCTION
Military Standard of the People's Republic of China-General Armament Department, metal stripping agent
- GJB 950.3-1990 Analysis methods for trace elements of precious metals and their alloys. Organic solvent extraction and malachite green photometric method for determination of trace amounts of gold in platinum and platinum and palladium alloys.
- GJB 950.4-1990 Analysis methods for trace elements of precious metals and their alloys. Organic solvent extraction of o-phenanthroline. Photometric method for determination of trace amounts of iron in platinum and platinum and palladium alloys.
- GJB 8671.17-2015 Test methods for metal cartridges Part 17: Repeated loading and repeated firing tests
- GJB 950.3A-2021 Analysis methods for trace elements of precious metals and their alloys Part 3: Determination of trace amounts of gold in platinum and platinum alloys and palladium alloys by organic solvent extraction malachite green photometric method
- GJB 446-1988 Adhesive 90° Peel Strength Test Method (Metal to Metal)
- GJB 445-1988 Test method for high temperature tensile strength of adhesives (metal to metal)
- GJB 950.4A-2021 Analysis methods for trace elements of precious metals and their alloys Part 4: Photometric determination of trace iron in platinum and platinum alloys and palladium alloys using organic solvent extraction of o-phenanthroline
- GJB 94-1986 Adhesives—Test Method for Uneven Peel Strength (Metal to Metal)
- GJB 448-1988 Adhesive low temperature 90° peel strength test method (metal to metal)
- GJB 447-1988 Adhesive high temperature 90° peel strength test method (metal to metal)
- GJB 444-1988 Test method for high temperature tensile shear strength of adhesives (metal-to-metal)
BE-NBN, metal stripping agent
- NBN EN ISO 3543:1995 Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:1981)
American Society for Testing and Materials (ASTM), metal stripping agent
- ASTM C1051-85(1994)e1 Standard Specification for Sodium (Na) as a Coolant for Liquid Metal-Cooled Reactors (Withdrawn 2000)
- ASTM D5517-14(2021) Standard Test Method for Determining Extractability of Metals from Art Materials
- ASTM D5517-14 Standard Test Method for Determining Extractability of Metals from Art Materials
- ASTM D5517-07 Standard Test Method for Determining Extractability of Metals from Art Materials
- ASTM D5517-00 Standard Test Method for Determining Extractability of Metals from Art Materials
- ASTM D5517-96 Standard Test Method for Determining Extractability of Metals from Art Materials
- ASTM B898-11(2016) Standard Specification for Reactive and Refractory Metal Clad Plate
- ASTM D1780-05(2020) Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
- ASTM D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM E2626-08 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
- ASTM E2626-08e1 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
- ASTM UOP873-86 Noble Metals and Modifiers in Catalysts by ICP-AES
- ASTM D1748-02 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
- ASTM D1748-83(1993)e1 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
- ASTM D1748-00 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
- ASTM D1748-10 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
- ASTM D1780-99 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
- ASTM D6412/D6412M-99 Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
- ASTM D6412/D6412M-99(2005) Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
- ASTM D6412/D6412M-99(2012) Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
- ASTM D6412/D6412M-99(2020) Standard Specification for Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
- ASTM D3166-99(2012) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM D3166-99(2020) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM E2097-00(2006) Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
- ASTM E2097-00 Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
- ASTM E2097-00(2014) Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., metal stripping agent
- ASHRAE CH-06-14-4-2006 Mechanism for Reaction between Polyolester Lubricant and Ferrous Metals Part II: Research Phase
Professional Standard - Machinery, metal stripping agent
Society of Automotive Engineers (SAE), metal stripping agent
- SAE AMS1650C-2001 Polish, Aircraft Metal
- SAE AMS1650D-2021 Polishing Compound, Aircraft Metal
- SAE AMS1626B-1989 Desmutter, Aluminum, Liquid
- SAE AMS1625B-1989 Desmutter, Aluminum, Powdered
- SAE J1523-2012 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
- SAE AMS1525E-2023 Cleaner for Aircraft Exterior Metallic Surfaces Wipe Solvent, Cold Operations
- SAE AMS1525B-1991 CLEANER FOR AIRCRAFT EXTERIOR METALLIC SURFACES Wipe Solvent, Cold Operations
- SAE AMS1525A-1980 CLEANER FOR AIRCRAFT EXTERIOR METALLIC SURFACES Wipe Solvent, Cold Operations
- SAE AMS1525-1977 CLEANER FOR AIRCRAFT EXTERIOR METALLIC SURFACES Wipe Solvent, Cold Operations
- SAE J1851-1987 Induction Cure Test for Metal Bonding Adhesives
- SAE AMS1525D-1995 (Noncurrent)Cleaner for Aircraft Exterior Metallic Surfaces, Wipe Solvent, Cold Operations
Taiwan Provincial Standard of the People's Republic of China, metal stripping agent
PL-PKN, metal stripping agent
IN-BIS, metal stripping agent
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), metal stripping agent
- ASHRAE 4776-2005 Mechanism for Reaction Between Polyolester Lubricant and Ferrous Metals, Part 1; Literature Search RP-1211
Defense Logistics Agency, metal stripping agent
FI-SFS, metal stripping agent
- SFS 3362-1975 Testing of materials. Reverse bend testing of metal sfteet and strip less than 3 mm thick
- SFS 4313-1979 METALLIEN PINNOITTEET. KIIHDYTETYT KORROOSIOKOKEET.CORRODKOTE-KOE
Liaoning Provincial Standard of the People's Republic of China, metal stripping agent
- DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine
Professional Standard - Light Industry, metal stripping agent
American Welding Society (AWS), metal stripping agent
Professional Standard - Nuclear Industry, metal stripping agent
- EJ/T 20191-2018 Determination of Plutonium α Activity Concentration in Radioactive Metal Waste TiOA Extraction-Liquid Scintillation Method
- EJ/T 20192-2018 Determination of 90Sr Activity Concentration in Radioactive Metal Waste by HDEHP Extraction Chromatography-β Counting Method
General Motors Corporation (GM), metal stripping agent
- GM 9984192-1997 Sealer - Preformed Patches Revision A
- GM 9985699-2004 Adhesive, Structural ?Metal, Tape, Expandable Revision D
- GM 9982142-1989 Adhesive, Two-Part, Epoxy, Structural- Metal
- GM 9982143-1989 Adhesive, Two-Part, Epoxy, Structural-Metal Shown on 9982142
- GM 9982144-1989 Adhesive, Two-Part, Epoxy, Structural-Metal Shown on 9982142
- GM 9985800-1990 Adhesive, One-Part, Structural-Metal
- GM 9985837-1997 Adhesive, One-Part, Structural - Metal
- GM 9984195-1992 Sealer - Preformed, Floor Pan Patch [Replaced: GMNA 9984217, GMNA 9984217, GMNA 9984233, GMNA 9984233, GMNA 9985302, GMNA 9985302]
- GM 9986076-1999 Adhesive, Hot Melt, Urethane, Plastics or Metal Revision B
GOSTR, metal stripping agent
- GOST 17319-2019 Reagents. Methods for determination of heavy metals
- GOST R 58418-2019 Additive technologies. Metal powders and wires. Types of defects. Classification, terms and definitions
Anhui Provincial Standard of the People's Republic of China, metal stripping agent
International Electrotechnical Commission (IEC), metal stripping agent
- IEC 60231G:1977 General principles of nuclear reactor instrumentation. Seventh supplement: Liquid-metal cooled fast reactor
IL-SII, metal stripping agent
- S.I.742-1969 METAL CONTAINERS FOR AEROSOL DISPENSERS: SAFETY REQUIREMENTS
Shaanxi Provincial Standard of the People's Republic of China, metal stripping agent
- DB6101/T 3121-2022 Guidelines for the protection of metals from corrosion by disinfectants
ANS - American Nuclear Society, metal stripping agent
- 54.1-1989 General Safety Design Criteria for a Liquid Metal Reactor Nuclear Power Plant
European Association of Aerospace Industries, metal stripping agent
- AECMA PREN 2002-13-1998 Aerospace Series Metallic Materials Test Methods Part 13: Reverse Torsion Testing of Wire Edition P 1
- AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
SAE - SAE International, metal stripping agent
- SAE J1523-2021 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
- SAE J1523-1985 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives@ Recommended Practice
- SAE AMS1525C-1992 Cleaner for Aircraft Exterior Metallic Surfaces Wipe Solvent@ Cold Operations
- SAE J1851-2021 Induction Cure Test for Metal Bonding Adhesives@ Recommended Practice
GM Holden Ltd, metal stripping agent
- HOLDEN HN 2079-2013 Adhesive - Metal to Metal - Non Flammable Do Not Use on New Programs, No Replacement
GM Daewoo, metal stripping agent
PT-IPQ, metal stripping agent
Professional Standard - Aerospace, metal stripping agent
- QJ 1707-1989 Pulse reflection ultrasonic thickness measurement method for metal and its products
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, metal stripping agent
- PREN 2243-2-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 2: Peel Metal-Metal (Edition P 1)
Association of German Mechanical Engineers, metal stripping agent
GM Europe, metal stripping agent
国家能源局, metal stripping agent
- NB/SH/T 0982-2019 Turbidity determination method for lubricating oil metal detergents
海关总署, metal stripping agent
- SN/T 5237-2020 Determination of extractable heavy metals in imported and exported textiles by inductively coupled plasma mass spectrometry
AT-ON, metal stripping agent
Aerospace, Security and Defence Industries Association of Europe (ASD), metal stripping agent
- ASD-STAN PREN 2243-2-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 2: Peel Metal-Metal (Edition P 1)