ZH
RU
ES

out of roundness porcelain

out of roundness porcelain, Total:57 items.

In the international standard classification, out of roundness porcelain involves: Linear and angular measurements, Insulating materials, Electrical wires and cables, Tyres, Ceramics, Components for electrical equipment, Gears, Tobacco, tobacco products and related equipment, Cutting tools, Fluid power systems, Construction materials, Electrical engineering in general.

American Society of Mechanical Engineers (ASME), out of roundness porcelain

ASME B89.3.1-1972(R1997) Measurement of Out-of-Roundness
ASME B89.3.1-1972 Measurement of Out-Of-Roundness
ASME B89.3.1-1972(R2003) Measurement of Out - Of - Roundness

RU-GOST R, out of roundness porcelain

GOST 14340.3-1969 Enamelled round wires. Methods of the flexibility test
GOST 14340.5-1978 Enamelled round wires. Method of bonding strength test
GOST 30224-1996 Novikov cilindrical gears with hardness of teeth surface not less 35 HRCe. Basic rack
GOST R 57971-2017 Ceramic composites. Determination of tensile strength at the hoop tension at normal temperature on cylindrical samples with elastomeric inserts

British Standards Institution (BSI), out of roundness porcelain

BS 3730-3:1982 Assessment of departures from roundness - Methods for determining departures from roundness using two- and three-point measurement
BS EN ISO 17161:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
BS EN IEC 63182-5:2022 Magnetic powder cores. Guidelines on dimensions and the limits of surface irregularities - Cylinder-cores
BS ISO 8434-6:2010 Metallic tube connections for fluid power and general use. 60 cone connectors with or without O-ring
BS ISO 8434-6:2009 Metallic tube connections for fluid power and general use - 60 ° cone connectors with or without O-ring
BS 4500-4:1985 ISO limits and fits - Specification for system of cone (taper) fits for cones from C=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
BS 3730-2:1982 Assessment of departures from roundness - Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, out of roundness porcelain

GB/T 30198-2013 Test method for run-out of motor vehicle tyres
GB/T 3389.5-1995 Test methods for the properties of piezoelectric ceramics--Thickness extension vibration mode for disk

Japanese Industrial Standards Committee (JISC), out of roundness porcelain

JIS B 7451:1997 Instruments for the assessment of departure from roundness -- Measurement of variations in radius
JIS R 1512:1991 Conical flanged 90 degrees bent pipes of acid proof porcelains for chemical industry
JIS R 1513:1991 Conical flanged 45 degrees bent pipes of acid proof porcelains for chemical industry

Association Francaise de Normalisation, out of roundness porcelain

NF EN ISO 17161:2016 Céramiques techniques - Céramiques composites - Détermination du degré de non-alignement lors des essais mécaniques uniaxiaux
NF EN IEC 63182-5:2022 Noyaux en poudre magnétique - Lignes directrices concernant les dimensions et les limites des irrégularités de surface - Partie 5 : noyaux cylindriques
NF E66-328*NF ISO 9361-2:2012 Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2 : dimensions of inserts with cylindrical fixing hole
NF E66-328:1991 Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Part 2 : dimensions of inserts with cylindrical fixing hole.
NF E66-327*NF ISO 9361-1:2014 Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1 : dimensions of inserts without fixing hole
NF E66-327:1991 Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Part 1 : dimensions of inserts without fixing hole.

ES-UNE, out of roundness porcelain

UNE-EN ISO 17161:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014) (Endorsed by AENOR in June of 2016.)

German Institute for Standardization, out of roundness porcelain

DIN EN ISO 17161:2016-10 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014); German version EN ISO 17161:2016
DIN EN 1071-2:2003 Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method; German version EN 1071-2:2002
DIN 6888:1956 Drive Type Fastenings without Taper Action; Woodruff Keys, Dimensions and Application
DIN 51030:2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products
DIN EN IEC 63182-5:2021-07 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores (IEC 51/1345/CD:2020); Text in English / Note: Date of issue 2021-06-04

American Society for Testing and Materials (ASTM), out of roundness porcelain

ASTM C1684-08 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength
ASTM C1684-13 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperaturemdash;Cylindrical Rod Strength
ASTM C1684-13e1 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperaturemdash;Cylindrical Rod Strength
ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM C1684-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature&x2014;Cylindrical Rod Strength
ASTM C1231/C1231M-07 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-00e1 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-06 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-15 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
ASTM C1231/C1231M-08a Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M-09 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

GOSTR, out of roundness porcelain

GOST 34233.11-2017 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and bottoms according to weld misalignment, angular misalignment and shell nonroundness

American Gear Manufacturers Association, out of roundness porcelain

AGMA 99FTM3-1999 Measurement Uncertainty for Pitch and Runout Artifacts

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, out of roundness porcelain

JEDEC JESD241-2015 Procedure for Wafer-Level DC Characterization of Bias Temperature Instabilities

AGMA - American Gear Manufacturers Association, out of roundness porcelain

ISO 1328-2:1999 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information

Danish Standards Foundation, out of roundness porcelain

DS/EN 843-4:2005 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 4: Vickers, Knoop and Rockwell superficial hardness

RO-ASRO, out of roundness porcelain

SR ISO 5166:1995 System of cone fits for cones fromC = 1:3 to 1:500, lengths from 6 to 630 mm and diameters up to 500 mm

AT-ON, out of roundness porcelain

ONORM M 3247-1986 Steel bars; hot rolled, unequal angles with round edges; dimensions, masses, permissible deviations, statte values

CZ-CSN, out of roundness porcelain

CSN 34 7010 Cast.65-1972 Test procedure for evalution of the thermal endurance of enamelled round wire by the loss of electric strength enamel insulation

National Metrological Technical Specifications of the People's Republic of China, out of roundness porcelain

JJF(烟草) 2.2-2008 Evaluation of Uncertainty in Measurement for Parameter of Physical Characteristics of Cigarettes.Part 2: Circumference.Laser Method
JJF(烟草)2.2-2008 Evaluation of Uncertainty in Measurment for Parameter of Physical Characteristics of Cigarettes—Part 2:Circumference—Laser Method

ESDU - Engineering Sciences Data Unit, out of roundness porcelain

TM 101-2011 Derivation of lubricant entrainment velocity for disc cams with six different types of follower

TIA - Telecommunications Industry Association, out of roundness porcelain

TIA/EIA-455-93-1993 FOTP-93 Test Method for Optical Fiber Cladding Diameter and Noncircularity by Noncontacting Michelson Interferometry

American Welding Society (AWS), out of roundness porcelain

WRC 465:2001 Technologies for the Evaluation of Non-Crack-Like Flaws in Pressurized Components -- Erosion/Corrosion, Pitting, Blisters, Shell Out-Of-Roundness, Weld Misalignment, Bulges and Dents

YU-JUS, out of roundness porcelain

JUS C.B5.309-1990 Plpetrork. Single averlap flexible metal boses (unpacksd, so tightttess, rrlth cir-cnlar or polygonal secticm, in protected carbon steel)

AT-OVE/ON, out of roundness porcelain

OVE EN IEC 63182-5:2021 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores (IEC 51/1375/CDV) (english version)