ZH
RU
ES
Coupling gasket
Coupling gasket, Total:500 items.
In the international standard classification, Coupling gasket involves: Pipeline components and pipelines, Shipbuilding and marine structures in general, Aircraft and space vehicles in general, Bearings, Fasteners, Aerospace fluid systems and components, Shafts and couplings, Lifting equipment, Insulation, Components for aerospace construction, Motor cycles and mopeds, Fasteners for aerospace construction, Electrical accessories, Flexible drives and transmissions, Railway rolling stock, Agricultural machines, implements and equipment, Road vehicle systems, Seals, glands, Dentistry, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Materials and components for railway engineering, Vacuum technology, Mining equipment, Resistors, Capacitors, Equipment for the paper industry, Wind turbine systems and other alternative sources of energy, Fluid storage devices.
Group Standards of the People's Republic of China, Coupling gasket
Association Francaise de Normalisation, Coupling gasket
- NF J65-165:1958 Shipbuilding. Shaft lines. Couplings. Shaft ends, keys, nuts.
- NF P16-214-2*NF EN 16397-2:2014 Flexible couplings - Part 2 : characteristics and testing for metal banded flexible couplings, adaptors and bushes
- NF J65-135:1958 Shipbuilding. Shaft lines. Jointing of composite continuous sheathing.
- NF L26-210:1964 Serrated couplings.
- NF J65-175:1958 Shipbuilding. Shaft lines. Couplings. Details of shaft ends, keys and assembly bolts for muff couplings.
- NF EN 3244:2002 Série aérospatiale - Système de raccordement 8o30' en alliage de titane - Raccords droits
- NF EN 15807:2021 Applications ferroviaires - Demi-accouplements pneumatiques
- NF S61-707:1973 Demi-raccord de ventilation incendie DN 300
- NF C93-020*NF EN 60915:2013 Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
German Institute for Standardization, Coupling gasket
- DIN 28135:1987-05 Axial thrust washers for flange couplings of vertical shaft for agitators
- DIN 28135:1987 Axial thrust washers for flange couplings of vertical shaft for agitators
- DIN EN 16397-2:2015-01 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes; German version EN 16397-2:2014
- DIN 31696:1978 Plain Thrust Bearings; Pivoted Pad Thrust Bearings; Fitting Dimensions
- DIN 3867:2012-02 Non-soldering compression couplings - Pressure bush for butt joints
- DIN 11028:1999-07 Agricultural tractors and machinery - Trailer coupling - Bolt coupling for coupling-ring 40
- DIN 3863:2003-08 Compression couplings - Spherical liners - Design and types of port end U and Y
- DIN EN 2311:1988 Aerospace series; bushes with self-lubricating liner; technical specification
- DIN 20583:1995-11 Mine cars - Shackle coupling
- DIN 7647:1995 Compression couplings with spherical liners - Adaptors with parallel screwed-in ends
- DIN 74058:1988-09 Coupling ball; dimensions, clearance
- DIN 74304:1987-09 Compression coupling; hose coupling
- DIN 20581:1988-03 Mine cars; strap type coupling
- DIN EN 4806:2017-08 Aerospace series - Flange couplings - Weld coupling, straight, in nickel alloy - Inch series; German and English version; EN 4806:2017
- DIN EN 4805:2017-08 Aerospace series - Flange couplings - Weld coupling, straight, in heat resisting steel - Inch series; German and English version EN 4805:2017
- DIN 15451-2:1978-08 Cranes; cardan shafts, connection to coupling flange
- DIN EN 15807:2021-05 Railway applications - Pneumatic half couplings; German version EN 15807:2021
- DIN EN 15807:2019 Railway applications - Pneumatic half couplings; German and English version prEN 15807:2019
- DIN 74075-1:1997 Hydraulic couplings on lorries and semi-trailer towing vehicles - Part 1: Location of hydraulic couplings
- DIN 74075-1:1997-04 Hydraulic couplings on lorries and semi-trailer towing vehicles - Part 1: Location of hydraulic couplings
- DIN 3859:2022 Compression couplings - Technical delivery conditions
- DIN 3859:2022-01 Compression couplings - Technical delivery conditions / Note: Under certain conditions, DIN 3859-1 (2005-09) remains valid alongside this standard until 2024-12-31.
- DIN 74344:1998-10 Air braking systems - Dummy coupling
- DIN 28159:2006 Shaft end for externally coupled glass lined steel agitators - Dimensions
- DIN 7632:1985 Compression couplings with spherical liner; reducers
- DIN EN 13371:2002-03 Cryogenic vessels - Couplings for cryogenic service; German version EN 13371:2001
- DIN EN 4816:2017-08 Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal - Technical specification - Inch series; German and English version EN 4816:2017
Military Standards (MIL-STD), Coupling gasket
- DOD A-A-53008-1987 PAD, LEG HOLDER
- DOD A-A-51319-1985 PAD, CONTAMINATION CONTROL MAT
- DOD A-A-50991-1985 PAD, MAGNETIC, SURGICAL INSTRUMENT
- DOD A-A-54093-1990 HEATER, HEAT TREATMENT PAD
- DOD A-A-54371-1991 HEATER, HEAT TREATMENT PAD
- DOD A-A-54527-1991 PAD, ELECTRODE, DEFIBRILLATOR
- DOD A-A-53027-1987 LINER, FLASK, DENTAL CASTING MACHINE (NON-WATER ABSORBING)
- DOD A-A-53757-1988 LINER, FLASK, DENTAL CASTING MACHINE (ALUMINUM SILICATE, WATER ABSORBING)
International Organization for Standardization (ISO), Coupling gasket
British Standards Institution (BSI), Coupling gasket
- BS ISO 14287:2013 Plain bearings. Pad materials for tilting pad bearings
- BS EN 16397-2:2014 Flexible couplings. Characteristics and testing for metal banded flexible couplings, adaptors and bushes
- BS SP 94:1964+A2:2012 Specification for bronze oil-retaining bushes and thrust washers. For aircraft
- BS 3170:1972 Specification for flexible couplings for power transmission
RU-GOST R, Coupling gasket
European Committee for Standardization (CEN), Coupling gasket
- EN 16397-2:2014 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
- EN 4806:2017 Aerospace series - Flange couplings - Weld coupling@ straight@ in nickel alloy - Inch series
- EN 4808:2017 Aerospace series - Flange couplings - Weld coupling@ 90��lbow@ in nickel alloy - Inch series
- EN 4807:2017 Aerospace series - Flange couplings - Weld coupling@ 90��lbow@ in heat resisting steel - Inch series
AENOR, Coupling gasket
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Coupling gasket
工业和信息化部, Coupling gasket
PL-PKN, Coupling gasket
- PN M51046-1991 Fire fighting equipment. Gaskets for couplings, hose coupling reducers, outlet couplings and blank couplings
- PN M51038-1991 Fire fighting equipment. Outlet couplings
- PN-EN 15807-2021-08 E Railway applications -- Pneumatic half couplings
SE-SIS, Coupling gasket
CH-SNV, Coupling gasket
American Society for Testing and Materials (ASTM), Coupling gasket
- ASTM F1476-01(2006) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
- ASTM F1476-01 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
- ASTM F1476-07 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
- ASTM F1548-01(2006) Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
- ASTM F1548-01 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
- ASTM F1548-94 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
- ASTM F1476-95a Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
- ASTM F1476-07(2019) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
- ASTM F1548-01(2018) Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
- ASTM C1541-04 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
- ASTM F1548-01(2023) Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
United States Navy, Coupling gasket
CZ-CSN, Coupling gasket
Society of Automotive Engineers (SAE), Coupling gasket
- SAE AS1736B-1993 Washer, Coupling, Rigid, Fixed Cavity, Threaded Ferrule Type Tube Ends
- SAE AS4326-2015 NUT, COUPLING
- SAE J756-1981 MARINE PROPELLER-SHAFT COUPLINGS
- SAE AS8942-2014 Bearings, Plain and PTFE Lined, Self - Aligning
- SAE AS5175-2015 NUT, COUPLING, FLARED
- SAE AIR869A-2004 V-Couplings, Application of
- SAE ARP4968-2013 Installation Standard for Couplings
- SAE AS527-1991 COUPLING - FORGED RETAINER - QAD
- SAE AS526-1991 COUPLING - SHEET METAL RETAINER - QAD
- SAE AS527A-2001 Coupling - Forged Retainer - QAD
- SAE AS526A-2001 Coupling - Sheet Metal Retainer - QAD
- SAE AGS950-16-1975 AGS950 Metal Couplings Reducing Union Body (Steel)
- SAE J756-1987 Marine Propeller Shaft Couplings
- SAE AS1895/4A-1988 COUPLING, TYPE II (LOW PROFILE)
- SAE AS1895/4-1985 COUPLING, TYPE II (LOW PROFILE)
- SAE AIR869-2011 APPLICATION OF V-BAND COUPLINGS
- SAE AS1861-2002 NUT, SLEEVE COUPLING, TUBE REDUCER, FLARED
- SAE AS5355-1998 Couplings, Clamp, Grooved, V-Band
- SAE AS1895/1-1985 COUPLING, TYPE 1 (STANDARD PROFILE)
- SAE AS5355-2004 Couplings, Clamp, Grooved, V-Band
- SAE AGS954-17-1975 AGS954 Metal Couplings. (Steel). Outer Sleeve
- SAE AGS955-19-1978 AGS955 Metal Couplings (Steel) Inner Sleeve
- SAE AS5355B-2013 Couplings, Clamp, Grooved, V-Band
- SAE AIR869B-2014 V-Couplings, Including V-Band and V-Retainer Coupling Assemblies, Flange and Seal Design, Application of
- SAE AS1792B-1992 NUT, COUPLING, LIGHTWEIGHT, FLARELESS
- SAE AS1792-1985 NUT, COUPLING, LIGHTWEIGHT, FLARELESS
- SAE AGS712-14-1950 AGS712 Metal Couplings, Inner Sleeve (Brass)
- SAE AGS711-17-1937 AGS711 Metal Couplings. Outer Sleeve. (Brass)
- SAE AS43020-3-1993 AS43020 Swaged Couplings-Typical Joints (Steel)
- SAE AS1895/21-1992 INSTALLATION, JOINT, V-RETAINER COUPLING ASSEMBLY
- SAE AS1895/21A-2013 INSTALLATION, JOINT, V-RETAINER COUPLING ASSEMBLY
Professional Standard - Aviation, Coupling gasket
IN-BIS, Coupling gasket
Korean Agency for Technology and Standards (KATS), Coupling gasket
Professional Standard - Machinery, Coupling gasket
Defense Logistics Agency, Coupling gasket
- DLA AN4052 REV 7 VALID NOTICE 2-2013 Coupling, Shaft, Rigid
- DLA MS14271 REV D-2010 HANDLE, COUPLING, PNEUMATIC STARTER
- DLA AN3058 REV 6 VALID NOTICE 4-2013 Coupling, Electrical Conduit, Rigid
- DLA AN3054 REV 8 VALID NOTICE 4-2008 Nut, Coupling, Electrical Conduit
- DLA AN3054 REV 8 VALID NOTICE 5-2013 Nut, Coupling, Electrical Conduit
- DLA A-A-59439 A-2013 COUPLING HALVES, QUICK-DISCONNECT
- DLA AN6238 REV 4-2004 GASKET- HYDRAULIC REPLACEABLE RESERVOIR TYPE FILTER ELEMENT
- DLA MS17814 REV C VALID NOTICE 2-2012 COUPLING, FRANGIBLE, AVIATION GROUND LIGHTS
- DLA MS90133 REV F VALID NOTICE 1-2013 Gaskets, V - Groove; Part of RF Coaxial Connectors
- DLA A-A-59447 VALID NOTICE 2-2012 Reducer Coupling, Tube Female to Female Solder-Joint, Refrigeration
KR-KS, Coupling gasket
AGMA - American Gear Manufacturers Association, Coupling gasket
ZA-SANS, Coupling gasket
SAE - SAE International, Coupling gasket
U.S. Military Regulations and Norms, Coupling gasket
- ARMY A-A-52598 VALID NOTICE 1-2004 COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE
- ARMY A-A-52598-1996 COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE
- ARMY MIL-C-52705 B NOTICE 1-1998 COUPLINGS, HOSE, STEAM
- ARMY MIL-C-52705 B-1994 COUPLINGS, HOSE, STEAM
- ARMY MIL-B-13501 D VALID NOTICE 3-2010 Bearings and Bushings, Brass and Bronze, Machined or Formed
- ARMY A-A-59326/3 A VALID NOTICE 1-2008 Coupling Half, Male by External Pipe Thread, Type III
- ARMY A-A-59326/10 B-2011 COUPLING HALF, CAP, DUST, TYPE IX
- ARMY A-A-59326/18 A VALID NOTICE 1-2008 COUPLING HALF, FEMALE REDUCER BY INTERNAL PIPE THREAD, TYPE XVIII
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Coupling gasket
HU-MSZT, Coupling gasket
Professional Standard - Textile, Coupling gasket
Taiwan Provincial Standard of the People's Republic of China, Coupling gasket
工业和信息化部/国家能源局, Coupling gasket
Japanese Industrial Standards Committee (JISC), Coupling gasket
- JIS B 1456:2022 Roller chain shaft couplings
- JIS B 1456:1989 Roller chain shaft couplings
- JIS B 1456 AMD 1:2009 Roller chain shaft couplings (Amendment 1)
- JIS C 5270:2011 Capacitors and resistors for use in electronic equipment -- Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
RO-ASRO, Coupling gasket
- STAS 4697-1988 COMPRESSED-AIR AUTOMATIC BRAKES FOR RA1I.WAY YEHICLES Rubber gaskets for semi-coupling and alarm valves
- STAS 4698-1976 Fire fighting equipment RUBBER GASKETS FOR COUPLINGS
- STAS 11911/2-1986 Mechanical coupling's for general purpose FRICTION COUPLINGS WITH MECHANICAL CONTROL AND FREEWHEELING COUPLINGS Types
- STAS 7082-1987 COUPLINGS Terminology and classification
GM Global, Coupling gasket
- GMW 14742-2011 Elastomer for Pad Brake Pedal and Pad Clutch Pedal Issue 2; English
Professional Standard-Ships, Coupling gasket
- CB/T 4226-2013 Hydraulic Coupling for Ship
- CB/T 3417-1992 Technical Requirements for Ship Stern Shaft, Intermediate Shaft, Thrust Shaft and Coupling Repair
- CB/T 3417-2015 Technical Requirements for Ship Stern Shaft, Intermediate Shaft, Thrust Shaft and Coupling Repair
AIA/NAS - Aerospace Industries Association of America Inc., Coupling gasket
- NAS945-1961 Cap - Protective@ NAS 591 Coupling
- NAS945-2012 CAP@ PROTECTIVE@ NAS591 COUPLING (Rev 1)
- NAS522-1953 Coupling - Flexible@ Low Pressure Air Line
- NAS591-2011 COUPLING@ RIGID TUBE CONNECTOR@ ALUMINUM (Rev 6)
- NAS591-2017 COUPLING@ RIGID TUBE CONNECTOR@ ALUMINUM (Rev 7)
- NAS591-1981 Coupling - Rigid Tube Connector@ Aluminum (Rev 5)
- NAS594-2016 COUPLING@ RIGID TUBE CONNECTOR@ CRES (Rev 7)
- NAS594-2011 COUPLING@ RIGID TUBE CONNECTOR@ CRES (Rev 6)
North Atlantic Treaty Organization Standards Agency, Coupling gasket
Professional Standard - Military and Civilian Products, Coupling gasket
未注明发布机构, Coupling gasket
- SAE AS5234-2019 NUT@ COUPLING@ FLARELESS
- BS EN 60915:2007(2008) Capacitors and resistors for use in electronic equipment — Preferred dimensions of shaft ends, bushes and for the mounting of single - hole, bush - mounted, shaft - operated electronic components
国家铁路局, Coupling gasket
National Aeronautics and Space Administration (NASA), Coupling gasket
Aerospace Industries Association/ANSI Aerospace Standards, Coupling gasket
- AIA/NAS NAM14290-1999 Clamp, Loop, Cushioned, Rectangular, Metric
- AIA/NAS NAM14289-1998 Strap, Retaining, Cushioned, Rectangular, Two-Piece, Metric
- AIA/NAS NAS945-2012 CAP, PROTECTIVE, NAS591 COUPLING (Rev 1)
- AIA/NAS NAS594-2011 COUPLING, RIGID TUBE CONNECTOR, CRES (Rev 6)
- AIA/NAS NAS594-2016 COUPLING, RIGID TUBE CONNECTOR, CRES (Rev 7)
API - American Petroleum Institute, Coupling gasket
- API STD 671-1990 Special-Purpose Couplings for Refinery Service
- API STD 671-1979 Special-Purpose Couplings For Refinery Services (FIRST EDITION)
- API STD 671 ERTA-1984 Special-Purpose Couplings For Refinery Services (FIRST EDITION)
- API SPEC 11B-1982 SPECIFICATION FOR SUCKER RODS (PONY RODS@ POLISHED RODS@ COUPLINGS AND SUBCOUPLINGS) (Nineteenth Edition; Supplement 1: March 1983)
International Federation of Trucks and Engines, Coupling gasket
NZ-SNZ, Coupling gasket
Institute of Electrical and Electronics Engineers (IEEE), Coupling gasket
AR-IRAM, Coupling gasket
Professional Standard - Electron, Coupling gasket
American Gear Manufacturers Association, Coupling gasket
Aerospace Industries Association, Coupling gasket
American National Standards Institute (ANSI), Coupling gasket
Professional Standard - Chemical Industry, Coupling gasket
国家市场监督管理总局、中国国家标准化管理委员会, Coupling gasket
Military Standard of the People's Republic of China-General Armament Department, Coupling gasket
Standard Association of Australia (SAA), Coupling gasket
- AS 4177.3:1994 Caravan and light trailer towing components Part 3: Coupling body for ball couplings
ES-UNE, Coupling gasket
- UNE-EN 4806:2017 Aerospace series - Flange couplings - Weld coupling, Straight, in nickel alloy - Inch series (Endorsed by Asociación Española de Normalización in July of 2017.)
- UNE-EN 4805:2017 Aerospace series - Flange couplings - Weld coupling, Straight, in heat resisting steel - Inch series (Endorsed by Asociación Española de Normalización in July of 2017.)
- UNE-EN 4807:2017 Aerospace series - Flange couplings - Weld coupling, 90° elbow, in heat resisting steel - Inch series (Endorsed by Asociación Española de Normalización in June of 2017.)
- UNE-EN 4808:2017 Aerospace series - Flange couplings - Weld coupling, 90° elbow, in nickel alloy - Inch series (Endorsed by Asociación Española de Normalización in June of 2017.)
- UNE-EN 15807:2021 Railway applications - Pneumatic half couplings
- UNE-EN 4816:2017 Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal - Technical specification - Inch series (Endorsed by Asociación Española de Normalización in July of 2017.)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Coupling gasket
- PREN 4805-2015 Aerospace series Flange couplings Weld coupling@ straight@ in heat resisting steel Inch series (Edition P 1)
- PREN 4806-2015 Aerospace series Flange couplings Weld coupling@ straight@ in nickel alloy Inch series (Edition P 1)
机械工业部, Coupling gasket
- JB/T 7919.7-1995 Technical specifications for rolling bearing accessories tapered bushings, lock nuts and lock washers
BR-ABNT, Coupling gasket
Professional Standard - Railway, Coupling gasket
NEMA - National Electrical Manufacturers Association, Coupling gasket
Danish Standards Foundation, Coupling gasket
Lithuanian Standards Office , Coupling gasket
AT-ON, Coupling gasket
IT-UNI, Coupling gasket
CEN - European Committee for Standardization, Coupling gasket
Professional Standard - Petroleum, Coupling gasket
International Electrotechnical Commission (IEC), Coupling gasket
- IEC 60915:2006 Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
American Petroleum Institute (API), Coupling gasket
- API Spec 11B-2010(2019) Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod Clamps, Stuffing Boxes, and Pumping Tees (Twenty-Seventh Edition: Incorporating Errata 1: October 2010; Errata 2: February 2011)
Professional Standard - Light Industry, Coupling gasket
- QB/T 1418-1991 Interchangeable dimensions of paper roll bearing shell and coupling
国家能源局, Coupling gasket
- NB/T 10995-2022 Technical specifications for high-speed shaft couplings for wind turbines
European Committee for Electrotechnical Standardization(CENELEC), Coupling gasket
- EN 60915:2007 Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
VN-TCVN, Coupling gasket
NATO - North Atlantic Treaty Organization, Coupling gasket
- AASSEP-04-2014 TYRE VALVE COUPLINGS (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additional information ple
BE-NBN, Coupling gasket
ES-AENOR, Coupling gasket
Canadian Standards Association (CSA), Coupling gasket
- CSA B242-05-2005 Groove- and shoulder-type mechanical pipe couplings Third Edition