ZH
RU
ES

High and low temperature alternating test

High and low temperature alternating test, Total:276 items.

In the international standard classification, High and low temperature alternating test involves: Fibre optic communications, Electricity. Magnetism. Electrical and magnetic measurements, Environmental testing, TESTING, Photography, Mechanical testing, Internal combustion engines for road vehicles, Thermodynamics and temperature measurements, Energy and heat transfer engineering in general, Rubber, Road vehicles in general, Wind turbine systems and other alternative sources of energy, Electrical and electronic testing, Optical equipment, Testing of metals, Railway rolling stock, Analytical chemistry, Road vehicle systems, Rails and railway components, Electrical accessories, Railway engineering in general, Test conditions and procedures in general, Manufacturing forming processes, Refractories, Optics and optical measurements, Iron and steel products, Ceramics, Lamps and related equipment, Products of the chemical industry, Power stations in general, Reinforced plastics, Metalliferous minerals, Fuel cells, On-board equipment and instruments, Aerospace electric equipment and systems, Materials for aerospace construction, Pipeline components and pipelines, Rectifiers. Convertors. Stabilized power supply, Insulation, Rotating machinery, Nuclear energy engineering, Switchgear and controlgear, Road engineering, Materials and articles in contact with foodstuffs, Protection of and in buildings, ELECTRICAL ENGINEERING, Transformers. Reactors, Rubber and plastics products, Electrical wires and cables, Lubricants, industrial oils and related products, Semiconductor devices, Fruits. Vegetables.

American National Standards Institute （ANSI), High and low temperature alternating test

ANSI/TIA-455-37-A-1993 Low or High Temperature Bend Test
ANSI/EIA/TIA 455-37A:1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/TIA-455-37A-1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/EIA 364-105-A:2008 Altitude - Low Temperature Test Procedure for Electrical Connectors
ANSI/TIA/EIA 455-69-A-1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers
ANSI/EIA/TIA 455-69A:1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers
ANSI/IEEE 433:2009 Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
ANSI/ASTM E209:2000 Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

Professional Standard - Electron, High and low temperature alternating test

SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G
SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
SJ/Z 9001.44-1987 Basic environmental testing procedures--Part 3: Background information--Section One:Cold and dry heat tests

Korean Agency for Technology and Standards (KATS), High and low temperature alternating test

KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
KS R 0016-1971 Method of high and low temperature test for automobile parts
KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
KS R 0016-2015 Method of high and low temperature test for automobile parts
KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
KS M 6670-2016 Testing method for low-temperature compression set of vulcanized elastomers
KS R 9213-2007(2017) Railway rolling stock－High and low temperature test methods of parts
KS R 9191-1996(2016) High and low temperature testing methods for parts of railway signaling
KS M 6670-1995 Testing method for low-Temperature compression set of vulcanized elastomers
KS M 6670-2016(2021) Testing method for low-temperature compression set of vulcanized elastomers
KS M ISO 3383-2002(2007) Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
KS E ISO 4696-2:2003 Iron ores-Static test for low-temperature reduction-disintegration-Part 2:Reaction with CO
KS E ISO 4696-2:2017 Iron ores－Static test for low-temperature reduction-disintegration－Part 2:Reaction with CO
KS M ISO 28702:2009 Rubber and plastics hoses and tubing-Textile-reinforced types-Sub-ambient temperature crush test
KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M 1914-2002(2007) Phthalic anhydride for industrial use－Methods of test－Determination of impurities oxidizable in the cold by potassium permanganate－Iodometric method
KS E ISO 4696-1:2008 Iron ores for blast furnace feedstocks-Determination of low-temperature reduction-disintegration indices by static method-Part 1:Reduction with CO, CO2, H2 and N2
KS E ISO 4696-1:2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by static method－Part 1：Reduction with CO, CO2, H2 and N2

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High and low temperature alternating test

GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
GB/T 10592-2008 Specifications for low/high temperature test chambers
GB/T 10592-1989 Specification for low/high temperature test chambers
GB/T 10592-2023 High and low temperature test chamber technical conditions
GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
GB/T 2424.1-2005 Environmental testing for electric and electronic products Guidance for high temperature and low temperature tests
GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
GB/T 12085.22-2022 Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
GB/T 42900-2023 High temperature compression test method for metallic materials with high strain rate
GB/T 9868-1988 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
GB/T 2424.1-2015 Environmental testing.Part 3:Supporting documentation and guidance.Cold and dry heat tests
GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
GB/T 32967.1-2016(英文版) Metallic materials—Torsional test method at high strain rates—Part 1: Method of test at room temperature
GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
GB/T 14999.2-1994 Methods of acid etch test for transvese macro-structures of heat-resisting superalloys
GB/T 34108-2017(英文版) Metallic materials—High strain rate compression test method at ambient temperature
GB/T 4194-1984 Creep testing,high temperature treatment and metallographic examination of the tungsten wires
GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures
GB/T 9979-2005 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
GB/T 14999.1-1994 Methods of acid etch test for longitudinal macro-structures of heat-resisting superalloy bars
GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
GB/T 32967.1-2016 Metallic materials—Torsional test method at high strain rates—Part 1: Method of test at room temperature
GB/T 12085.2-2022 Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
GB/T 12085.16-1995 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration, in dry heat or cold
GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
GB/T 2423.26-1992 Basic environmental testing procedures for electric and electronic products--Test Z/BM: combined heat/low air pressure tests
GB/T 31035-2014 Test methods for proton exchange membrane fuel cell stack at subzero environment
GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
GB/T 12085.10-2010 Optics and optical instruments.Environmental test methods.Part 10:Combined sinusoidal vibration and dry heat or cold
GB/T 12085.21-2011 Optics and optical instruments.Enviromental test methods.Part 21: Combined low pressure and ambient temperature or dry heat
GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
GB/T 12085.15-1995 Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold
GB/T 12085.16-2010 Optics and optical instruments.Environmental test methods.Part 16:Combined bounce or steady-state acceleration and dry heat or cold
GB/T 12085.13-1989 Optics and optical instruments--Environmental test methods--Shock,bump or freefall,dry heat,cold
GB/T 14999.2-2012 Test methods for superalloys.Part 2:Verification of transverse macro-structures and defect by etch
GB/T 14999.1-2012 Test method for superal loys.Part 1:Verification of longitudinal macro-structures and defect by etch
GB/T 12085.13-2010 Optics and optical instruments.Environmental test methods.Part 13:Combined shock,bump or free fall and dry heat or cold
GB/T 12085.15-2010 Optics and optical instruments.Environmental test methods.Part 15:Combined digitally controlled broad-band random vibration and dry heat or cold
GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
GB/T 328.15-2007 Test methods for building sheets for waterproofing Part 15: Bitumen sheets for waterproofing-foldability at low temperature
GB/T 31923.2-2015 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 2:Reduction with CO and N<下标2>
GB/T 31923.1-2015 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 1: Reduction with CO, CO<下标2>, H<下标2> and N<下标2>
GB/T 25096-2010 Composite station post insulators for substations with AC voltages greater than 1000V.Definitions,test methods and acceptance riteria

Professional Standard - Machinery, High and low temperature alternating test

JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras
JB/T 2980.1-1999 Test method for hot deformation of investment casting shell
JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions
JB/T 7900-2002 Standard test method for change of resistance with temperature of high resistance alloys for electrical heating

工业和信息化部/国家能源局, High and low temperature alternating test

JB/T 13229-2017 High and low temperature environmental chamber for testing machine

TIA - Telecommunications Industry Association, High and low temperature alternating test

EIA/TIA-455-37A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

Taiwan Provincial Standard of the People's Republic of China, High and low temperature alternating test

CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
CNS 11788-1986 Method of Test for Fiber Optic Devices (FOTP-37 Cable Bend Test Low and High Temperature)
CNS 10022-1983 Method of test for permanent compression set under low temperature of vulcanized rubber (→CNS 3564)
CNS 12867-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Dry Heat/Low Air Pressure Tests
CNS 5540-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Reverse Bias Test of Variable Capacitance Diodes Under High Temperature)

SE-SIS, High and low temperature alternating test

SIS SS 11 23 15-1982 Steel- Interruptedcreep testing at elevated temperatures(Load and temperature interrupted)
SIS SS 11 23 12-1982 Steel- Creep-rupture testing at elevated temperatures
SIS 11 23 12-1966 Creep-rupture testing of steel at elevated temperatures
SIS 11 23 12-1973 Creep-rupture testing of steel at elevated temperatures
MNC 323-1982 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
MNC 323 E-1984 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
MNC 323-1979 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
MNC 323 E-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing — Summary
MNC 323-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
MNC 323 E-1982 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
MNC 323-1984 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
SIS 11 23 15-1966 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
SIS 11 23 15-1973 Interrupted creep testing of steel at elevated temperatures (Load and temperature interrupted)
MNC 323-1972 Summary of Swedish Standard for testing at elevated temperatures, creep testing, relaxation testing and fatigue testing

International Organization for Standardization (ISO), High and low temperature alternating test

ISO/R 204:1961 Non-interrupted creep testing of steel at elevated temperatures
ISO/R 206:1961 Creep stress rupture testing of steel at elevated temperatures
ISO/R 203:1961 Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
ISO 23838:2022 Metallic materials — High strain rate torsion test at room temperature
ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
ISO 28702:2008 Rubber and plastics hoses and tubing - Textile-reinforced types - Sub-ambient temperature crush test
ISO 4233:2023 Reactor technology — Nuclear fusion reactors — Hot helium leak testing method for high temperature pressure-bearing components in nuclear fusion reactors
ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, High and low temperature alternating test

GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
GB/T 4194-2017 Creep testing, high temperature treatment and metallographic examination of the tungsten wire
GB/T 34108-2017 Metallic materials—High strain rate compression test method at ambient temperature
GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures

British Standards Institution (BSI), High and low temperature alternating test

BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures
BS ISO 23838:2022 Metallic materials. High strain rate torsion test at room temperature
21/30391471 DC BS ISO 23838. Metallic Materials. High Strain Rate Torsion Test at Room Temperature
BS EN 3745-405:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/High temperature bend test
BS ISO 28702:2008 Rubber and plastics hoses and tubing - Textile reinforced types - Sub-ambient temperature crush test
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
BS ISO 9022-22:2012 Optics and photonics. Environmental test methods. Combined cold, dry heat or temperature change with bump or random vibration
BS PD IEC TR 62271-312:2021 High-voltage switchgear and controlgear. Guidance for the transferability of type tests of high-voltage/low-voltage prefabricated substations
PD IEC TR 62271-312:2021 High-voltage switchgear and controlgear. Guidance for the transferability of type tests of high-voltage/low-voltage prefabricated substations
DD ENV 820-4-2002 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural creep deformation at elevated temperatures
BS 1902 Sec.10.1:1993 Methods of testing refractory materials. Investment casting shell mould systems. Determination of resistance to deformation at elevated temperatures
BS EN 2349-318:2007 Aerospace series - Requirements and test procedures for relays and contactors - Pick-up voltage at high temperature and drop-out voltage at low temperature
BS EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
BS EN 62772:2016 Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria

(U.S.) Telecommunications Industries Association , High and low temperature alternating test

TIA-455-37-A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
TIA-455-37-A-2000(2013) FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

Professional Standard - Aviation Industry, High and low temperature alternating test

Q/HBm 109-1994 High temperature and low temperature test methods for auto parts

CZ-CSN, High and low temperature alternating test

CSN 42 0351-1988 Testing of metals. Creep testing at elevated temperatures
CSN 34 7010 Cast.68-1972 Low and high temperature endurance test of fibrous impregnated coverings
CSN 34 7010 Cast.69-1972 Low and high temperature endurance test of fibrous impregnated coveringa

国家市场监督管理总局、中国国家标准化管理委员会, High and low temperature alternating test

GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
GB/T 37783-2019 Metallic materials—High strain rate tensile test method at elevated temperature

Professional Standard - Military and Civilian Products, High and low temperature alternating test

WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments

工业和信息化部, High and low temperature alternating test

WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
JB/T 13702.1-2019 Camera Environmental Testing Part 1: High and Low Temperature Tests
YS/T 1551-2022 Room temperature high strain rate compression test method for titanium alloys

Professional Standard - Aviation, High and low temperature alternating test

HB 5151-1996 High temperature tensile creep test method for metals
HB 5151-1980 High temperature tensile creep test method for metals
HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
HB 5352.2-2004 Test method for properties of investment casting shell-Part 2:Determination of deformation under weight at elevated temperature
HB 5352.3-2004 Test method for properties of investment casting shell-Part 3:Determination of deformation under load at elevated temperature

Professional Standard - Aerospace, High and low temperature alternating test

QJ 20052-2011 Cryogenic test method for high pressure helium valve
QJ 3061-1998 Hydrogen-oxygen rocket engine low temperature and high speed bearing test method

Liaoning Provincial Standard of the People's Republic of China, High and low temperature alternating test

DB21/T 2761-2017 High and low temperature test specification for wind power gearbox

IN-BIS, High and low temperature alternating test

Professional Standard - Ocean, High and low temperature alternating test

HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
HY 016.6-1992 High temperature change test of basic environmental test methods for marine instruments
HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test

RU-GOST R, High and low temperature alternating test

GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
GOST 25.601-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
GOST R 55033-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of flexibility at low temperature

Japanese Industrial Standards Committee (JISC), High and low temperature alternating test

JIS D 0204:1967 Method of high and low temperature test for automobile parts
JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
JIS R 2207:1976 Test method for the rate of linear change of refractory brick on heating
JIS Z 2279:1992 Method of high temperature low cycle fatigue testing for metallic materials
JIS R 1642-1:2002 The test method for internal friction test of fine ceramics at elevated temperatures -- Part 1: Free decay method by the torsion pendulum
JIS R 1723:2015 Testing method for creep behavior of continuous fiber-reinforced ceramic composites under tensile loading at elevated temperature

国家能源局, High and low temperature alternating test

NB/T 42154-2018 Test Guidelines for High Voltage/Low Voltage Prefabricated Substations

Group Standards of the People's Republic of China, High and low temperature alternating test

T/CNS 20-2020 Fretting wear test method for metallic materials in nuclear power plants under alternating conditions in high temperature and high pressure water
T/CNS 49-2021 Test method for stress corrosion cracking in high temperature pressurized water of metallic materials used in nuclear power plants - slow strain rate test
T/CSTM 00079-2019 Metallic tube-uniaxial creep testing method in tension under high-temperature water/flue gas
T/WHQASA 1-2021 Test method for high and low temperature matching dimensions of automobile composite outer cover
T/CSAE 233-2021 Methods of tensile testing for metal bar at high strain rates at room temperature for the automobile
T/CSEE 0213-2021 Test methods for low-voltage three-level AC/DC, DC/DC bidirectional converters
T/CEC 216-2019 Technical specification for inspection and test of AC charging piles for electric vehicles Special requirements for high-temperature coastal areas
T/CEEIA 306-2018 Cold dielectric（CD）high temperature superconducting（HTS）power cables and their accessories for rated voltages from 6 kV（Um=7.2kV） to 35 kV（Um=40.5kV） – test methods and requirements

Professional Standard - Railway, High and low temperature alternating test

TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
TB/T 2953-1999 High temperature and low temperature test methods for railway ground signal products

Association Francaise de Normalisation, High and low temperature alternating test

NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
NF EN 3745-405:2013 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 405 : essai de courbure aux températures basse/haute
NF L52-400-405*NF EN 3745-405:2013 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: low/High temperature bend test
NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
NF EN ISO 10619-3:2012 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 3 : essais de courbure à des températures basses et élevées
NF EN 2349-318:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 318 : tension de collage à haute température et de décollage à basse température
NF L58-100-318*NF EN 2349-318:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 318 : pick-up voltage at high temperature and drop-out voltage at low temperature

IT-UNI, High and low temperature alternating test

UNI 5111-1969 Mechanical tests of ferrous materials. Creep test for steel at elevated temperatures.
UNI 7533-1976
UNI 5920-1966

AENOR, High and low temperature alternating test

UNE 7323:1975 CREEP STRESS RUPTURE TESTING OF STEEL AT ELEVATED TEMPERATURES.

AT-ON, High and low temperature alternating test

ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures

RO-ASRO, High and low temperature alternating test

STAS 6596-1981 Test of metals NON-INTERRUPTED CREEP TESTING OF STEEL AT ELEVATED TEMPERATURES
STAS 8894/1-1980 Testing metals CREEP STRESS RUPTURE TESTING OF STEEL AT ELEVATED TEMPERATURES Elements and technical requirements for testing

Military Standard of the People's Republic of China-General Armament Department, High and low temperature alternating test

GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test
GJB 796.6-1990 High and low temperature test procedures for design and finalization of military fixed bridge beam equipment
GJB 1264.4-1994 Test method for aviation turbine engine lubricating oil. Method for determination of viscosity and viscosity change after standing at low temperature.

KR-KS, High and low temperature alternating test

KS R 9213-2007(2017)(英文版) Railway rolling stock－High and low temperature test methods of parts

National Metrological Verification Regulations of the People's Republic of China, High and low temperature alternating test

JJG 276-1988 Verification Regulation of High-Temperature Creep and Stress-Rupture Testing Machine
JJG 276-2009 Verification Regulation of High-Termperature Creep and Stress-Rupture Testing Machines

Electronic Components, Assemblies and Materials Association, High and low temperature alternating test

ECA EIA-364-105-1999 TP-105 Altitude - Low Temperature Test Procedure for Electrical Connectors

American Society for Testing and Materials (ASTM), High and low temperature alternating test

ASTM C1291-00a Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00a(2005) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM C1291-00a(2010) Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
ASTM D1229-03 Standard Test Method for Rubber Property8212;Compression Set at Low Temperatures
ASTM D1229-03(2015) Standard Test Method for Rubber Property&x2014;Compression Set at Low Temperatures
ASTM D1229-87(1997)e1 Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D1229-03(2019) Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM C1337-10 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM D2532-16 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2532-17 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2532-93(1998) Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2532-22 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2532-14 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM C1337-96(2005) Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
ASTM C1337-96(2000) Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
ASTM C1337-10(2015) Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM C1337-17 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM D1204-08 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-14(2020) Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-14 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D2532-10 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2983-22 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-21 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM E209-00(2005) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM E209-00(2010) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM E209-18 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM D8210-19a Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-20 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-18 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19b Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-22 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer

Guangdong Provincial Standard of the People's Republic of China, High and low temperature alternating test

DB44/T 1894-2016 Test method for high and low temperature weather resistance of LED street lamps and tunnel lamps

Professional Standard - Chemical Industry, High and low temperature alternating test

HG/T 3544-2006 Test method of activity for high temperature carbon monoxide shift catalyst
HG/T 4352-2012 Test method of activity for low temperature carbon monoxide shift catalysts in high pressure
HG/T 4353-2012 Test method of activity for low temperature carbon monoxide shift catalysts in ordinary pressure
HG/T 3544-2014 Test method of activity for high temperature carbon monoxide shift catalyst in atmospheric pressure
HG/T 4554-2013 Test method of activity for high temperature carbon monoxide shift catalysts in high pressure

National Metrological Technical Specifications of the People's Republic of China, High and low temperature alternating test

JJF 1298-2011 Program of Pattern Evaluation of High-Temperature Creep and Stress-Rupture Testing Machines

Professional Standard - Electricity, High and low temperature alternating test

DL/T 1331-2014 The guide for the test of AC transformation equipment without removing the high-voltage lead

(U.S.) Ford Automotive Standards, High and low temperature alternating test

FORD FLTM BB 101-11-2000 PHYSICAL, ELECTRICAL, HEAT AND COLD TESTING OF AUTOMOTIVE CABLE (Replaces FLTM BB 001-11)

Lithuanian Standards Office , High and low temperature alternating test

LST EN 3745-405-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
LST EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
LST EN 2349-318-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature

Danish Standards Foundation, High and low temperature alternating test

DS/EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
DS/IEC TR 62271-312:2021 High-voltage switchgear and controlgear – Part 312: Guidance for the transferability of type tests of high-voltage/low-voltage prefabricated substations
DS/EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature

GB-REG, High and low temperature alternating test

REG NASA-TN-D-1522-1962 Variable-amplitude fatigue tests with particular attention to the effects of high and low loads

Institute of Electrical and Electronics Engineers (IEEE), High and low temperature alternating test

IEEE Unapproved Draft Std P433/D15 Sept 2009 Draft Recommeded Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
IEEE Std C57.154-2012 IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., High and low temperature alternating test

IEEE 433-1974 Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Voltage at Very Low Frequency

YU-JUS, High and low temperature alternating test

JUS N.A5.705-1980 Basic environmental testing procedures. Test Aa: Cold of non heat-dissipating components, ajuipment or other articles with sudden change of temperature

European Committee for Standardization (CEN), High and low temperature alternating test

EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
EN 14187-4:2003 Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel
EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)

Standard Association of Australia （SAA）, High and low temperature alternating test

AS 1683.9:1992 Methods of test for elastomers - Rubber, vulcanized or thermoplastic - Determination of tension set at normal and high temperatures
AS 1774.12:2001(R2013)

国家质量监督检验检疫总局, High and low temperature alternating test

SN/T 2816-2011 Test method for total migration of polymeric materials for exported food contact materials at low temperatures

Jilin Provincial Standard of the People's Republic of China, High and low temperature alternating test

DB22/T 3410-2022 Low-temperature performance requirements and test methods for traction batteries for pure electric vehicles in alpine regions

German Institute for Standardization, High and low temperature alternating test

DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011
DIN ISO 9022-22:2012 Optics and photonics - Environmental test methods - Part 22: Combined cold, dry heat or temperature change with bump or random vibration (ISO 9022-22:2012)
DIN EN 2349-318:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature; German and English version EN 2349-318:2006
DIN EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/high temperature bend test; German and English version EN 3745-405:2012
DIN EN 2349-318:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature; German and English version EN 2349-318:2006

European Association of Aerospace Industries, High and low temperature alternating test

AECMA PREN 2349-318-1999 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 318: Pick-Up Voltage at High Temperature and Drop-Out Voltage at Low Temperature Edition 3E
AECMA PREN 2349-318-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 318: Pick-Up Voltage at High Temperature and Drop-Out Voltage at Low Temperature Edition P 1