ZH
RU
ES

sheet metal curvature

sheet metal curvature, Total:363 items.

In the international standard classification, sheet metal curvature involves: Testing of metals, Springs, Components for aerospace construction, Wood-based panels, Products of non-ferrous metals, Linear and angular measurements, Surface treatment and coating, Materials for aerospace construction, Welding, brazing and soldering, Gas and steam turbines. Steam engines, Test conditions and procedures in general, Chipless working equipment, Iron and steel products, Paint coating processes, Powder metallurgy, Manufacturing forming processes, Aerospace electric equipment and systems, Seals, glands, Paper and board, Medical equipment, Materials and components for railway engineering, Materials for the reinforcement of composites, Construction materials, Insulating materials.

SE-SIS, sheet metal curvature

SIS SS 11 26 23-1983 Metallic materials - Strip. Sheet - Reverse bend test
SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
SIS SS 11 26 26-1979 Me tallic materials — Simple bend testing
SIS 11 26 12-1967 Simple bend texting of nietals Sheet and strip up to and including S mm
SIS SS 11 23 72-1979 Metallic materials — Rotating bar bending fatigue testing — Design of test pieces
SIS SS 11 23 90-1979 Metallic materials — Rotating bend fatigue test piece — Type Alfa
SIS 11 26 10-1967 Simple bend testing of metals Plate and strip 3 mm and thicker, bar and wire
SIS SS 11 21 14-1979 Tensile test pieces type D
SIS SS 11 23 88-1979 Metallic materials — Uniaxial fatigue test pieces from flat products with thickness exceeding 12 mm — Type UP

British Standards Institution (BSI), sheet metal curvature

BS EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
BS EN ISO 7438:2016 Metallic materials. Bend test
BS EN ISO 7438:2005 Metallic materials - Bend test
BS EN ISO 7438:2020 Metallic materials. Bend test
BS EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
BS ISO 24213:2017 Tracked Changes. Metallic materials. Sheet and strip. Method for springback evaluation in stretch bending
BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
BS ISO 22407:2021 Metallic materials. Fatigue testing. Axial plane bending method
BS EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
BS EN ISO 5173:2010+A1:2011 Destructive tests on welds in metallic materials. Bend tests
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
18/30366891 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
BS EN ISO 5173:2023 Destructive tests on welds in metallic materials. Bend tests
20/30404146 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
BS EN 13523-7:2021 Tracked Changes. Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS ISO 1143:2021 Tracked Changes. Metallic materials. Rotating bar bending fatigue testing
20/30361190 DC BS ISO 22407. Metallic materials. Fatigue testing. Axial plane bending method
BS ISO 24213:2008 Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending
20/30425653 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
21/30426853 DC BS EN ISO 5173. Destructive tests on welds in metallic materials. Bend tests
BS EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 2: Determination of forming-limit curves in the laboratory
BS EN ISO 12004-2:2021 Metallic materials. Determination of forming-limit curves for sheet and strip. Determination of forming-limit curves in the laboratory
BS EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
BS EN 14651:2005+A1:2007(2008) Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
19/30393818 DC BS EN ISO 12004-2. Metallic materials. Sheet and strip. Determination of forming-limit curves. Part 2. Determination of forming-limit curves in the laboratory

TH-TISI, sheet metal curvature

TIS 2174-2004 Reverse bend test for metallic sheet and strip 3 mm thick or less [iso title: metallic materials.sheet and strip 3 mm thick or less.reverse bend test]
TIS 2173-2012 Metallic materials.bend test
TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
TIS 2176-2004 Torsion test for metallic wire [iso title: metallic materials.wire.simple torsion test]

RU-GOST R, sheet metal curvature

GOST 30003-1993 Metals. Cylindrial bending test of sheets and strips less than 2,5 mm thick
GOST R ISO 7438-2013 Mettallic materials. Bend test
GOST R 52764-2007 Metallic materials. Method of bend test for sheets and strips 3 mm thick and less
GOST 30456-1997 Metal production. Rolled steel and tubes. Methods of blow bending tests
GOST 18228-1994 Sintered metal materials excluding hard metals. Determination of transverse rupture strength
GOST 18228-1985 Powder metallurgy. Determination of bending strength limit
GOST 24036-1980 Seal sheet materials, asbestos polymer. Method of test for folding resistance
GOST 6282-1988 Plate crank shears with inclined blade. Parameters and dimensions. Norms of accuracy
GOST IEC 60811-504-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths

Professional Standard - Aviation, sheet metal curvature

HB 5178-1996 Metal sheet (strip) material repeated bending test method
HB 5178-1981 Metal sheet (strip) material repeated bending test method
HB 5175-1996 Metal wire repeated bending test method
HB 5175-1981 Metal wire repeated bending test method
HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates
HB 6140.4-1987 Test methods for formability of sheet metal - bend test
HB 5180-1981 Test method for cold bending of metal plate and strip
HB 5261-1983 KR curve test method for sheet metal

VN-TCVN, sheet metal curvature

TCVN 198-2008 Metallic materials.Bend test
TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
TCVN 5891-2008 Metallic materials.Tube (in full section).Bend test
TCVN 5401-2010 Destructive tests on welds in metallic materials.Bend tests
TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

CZ-CSN, sheet metal curvature

CSN ISO 7438:1994 Metallic materials.Bend test
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN 64 0130-1953
CSN ISO 7799:1994 Metallic materials. Sheet and strip 3 mm or less. Reverse bend test
CSN 64 0124-1953
CSN 42 0323-1982 Metal testing. Tensile testing of metals. Sheets, strips, thickness from 0,1 up to 0,5 mm

TR-TSE, sheet metal curvature

TS 205-1977 BEND TESTING OF METALLIC MATERIALS

European Committee for Standardization (CEN), sheet metal curvature

EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
EN ISO 7438:2005 Metallic materials Bend test
EN ISO 7799:2000 Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test ISO 7799:1985
EN ISO 7438:2016 Metallic materials - Bend test
EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test
EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
CEN EN 13523-7-2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 13523-7:2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-7:2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
prEN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021)
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)

International Organization for Standardization (ISO), sheet metal curvature

ISO 7438:2005 Metallic materials - Bend test
ISO 7438:2016 Metallic materials - Bend test
ISO 7438:1985 Metallic materials; Bend test
ISO 7438:2020 Metallic materials — Bend test
ISO 7799:1985 Metallic materials; Sheet and strip 3 mm thick or less; Reverse bend test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
ISO 8491:1986 Metallic materials; Tube (in full section); Bend test
ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
ISO 1143:2021 Metallic materials - Rotating bar bending fatigue testing
ISO 5173:2009 Destructive tests on welds in metallic materials - Bend tests
ISO 22407:2021 Metallic materials — Fatigue testing — Axial plane bending method
ISO 5173:2023 Destructive tests on welds in metallic materials — Bend tests
ISO/R 954:1969 Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)
ISO 5173:2009/Amd 1:2011 Destructive tests on welds in metallic materials - Bend tests; Amendment 1
ISO 24213:2008 Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending
ISO 24213:2017 Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending
ISO 9291:1996 Textile-glass reinforced plastics - Rovings - Preparation of unidirectional plates by winding
ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory

Association Francaise de Normalisation, sheet metal curvature

NF A03-158:2005 Metallic materials - Bend test.
NF A03-158:2016 Metallic materials - Bend test
NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
NF A03-159*NF EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.
NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
NF A03-091:1994 Metallic materials. Tube (in full section). Bend test.
NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
NF A89-203*NF EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests.
NF A89-203:1996 Destructive tests on welds in metallic materials. Bend tests.
NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF EN ISO 5173:2023 Essais destructifs des soudures sur matériaux métalliques - Essais de pliage
NF EN 12384:1999 Cuivre et alliages de cuivre - Détermination de la limite élastique en flexion de bande.
NF F80-151:1980 Railway transport equipment - Cold fulding radii for flat products - Minimum folding radii for non-ferrous rolled products.
NF Q03-128-1*NF ISO 2493-1:2011 Paper and board - Determination of bending resistance - Part 1 : constant rate of deflection
NF EN 13892-2:2003 Méthodes d'essai des matériaux pour chapes - Partie 2 : détermination de la résistance à la flexion et à la compression
NF EN 14651+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF EN 14651/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
NF EN ISO 14556:2023 Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy à entaille en V - Méthode d'essai instrumenté
NF A03-670-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2 : determination of forming-limit curves in laboratory.
NF P19-212*NF EN 14651+A1:2007 Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual).
NF EN ISO 9016:2022 Essais destructifs des soudures sur matériaux métalliques - Essai de flexion par choc - Position de l'éprouvette, orientation de l'entaille et examen

ZA-SANS, sheet metal curvature

SANS 7438:2003 Metallic materials - Bend test
SANS 7438:2009 Metallic materials - Bend test
SANS 7799:2003 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
SANS 8491:2003 Metallic materials - Tube (in full section) - Bend test
SANS 7801:2003 Metallic materials - Wire - Reverse bend test
SANS 547:2006 Destructive tests on welds in metallic materials - Bend tests

German Institute for Standardization, sheet metal curvature

DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
DIN 9003-3:1994 Aerospace - Bending of light metal sheets and strips - Part 3: Bending radii, directions for design
DIN 9003-3:1994-08 Aerospace - Bending of light metal sheets and strips - Part 3: Bending radii, directions for design
DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN 9003-1:1984-10 Aerospace; bending of sheets, plates and strips of steel and heat-resisting alloys, bending radii, directions for design
DIN EN ISO 7799:2000-07 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN ISO 7801:2008-10 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
DIN 9003-5:1986-12 Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values / Note: To be replaced by DIN EN 3071 (1997-09).
DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
DIN EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001
DIN 50113:1982 Testing of metals; Rotating bar bending fatigue test
DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
DIN 9003-5:1986 Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values
DIN 9003-1:1984 Aerospace; bending of sheets, plates and strips of steel and heat-resisting alloys, bending radii, directions for design
DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN EN ISO 7438:2016 Metallic materials - Bend test (ISO 7438:2016); German version EN ISO 7438:2016
DIN EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN EN ISO 5173:2023-05 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023); German version EN ISO 5173:2023
DIN EN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021); German and English version prEN ISO 5173:2021
DIN EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2014
DIN 5520:2002 Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys
DIN 5520:2002-07 Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008); English version of DIN EN ISO 12004-2:2009-02
DIN EN 14651:2007-12 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual); German version EN 14651:2005+A1:2007
DIN EN 14651:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual) (includes Amendment A1:2007); English version of DIN EN 14651:2007-12
DIN EN ISO 12004-2:2021-07 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021); German version EN ISO 12004-2:2021
DIN EN ISO 12004-2:2019 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO/DIS 12004-2:2019); German and English version prEN ISO 12004-2:2019
DIN EN ISO 16808:2022-08 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022); German version EN ISO 16808:2022

KR-KS, sheet metal curvature

KS B 0804-2001(2021)(英文版) Metallic materials－Bend test
KS B ISO 1143-2003(2023)
KS B ISO 5173-2021 Destructive tests on welds in metallic materials — Bend tests
KS B ISO 5173-2016 Destructive tests on welds in metallic materials－Bend tests
KS D ISO 24213-2009 Metallic materials－Sheet and strip－ Method for springback evaluation in stretch bending

Danish Standards Foundation, sheet metal curvature

DS/EN ISO 7438:2005 Metallic materials - Bend test
DS/ISO 7438:2020 Metallic materials – Bend test
DS/EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
DS/EN ISO 7438:2020 Metallic materials – Bend test (ISO 7438:2020)
DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
DS/EN 10232:1994 Metallic materials-Tube(in full section)-Bend test
DS/EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DS/EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
DS/EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1
DS/EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
DS/ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory
DS/EN 14651+A1:2008 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
DS/EN ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)

IT-UNI, sheet metal curvature

UNI EN ISO 7438:2020 Metallic materials - Bend test
UNI 6381-1968
UNI 564-1960
UNI EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
UNI 5548-1965
UNI 5549-1965

Japanese Industrial Standards Committee (JISC), sheet metal curvature

JIS Z 2248:2022 Metallic materials -- Bend test
JIS Z 2248:2006 Metallic materials -- Bend test
JIS Z 2248:1996 Method of bend test for metallic materials
JIS Z 2204:1996 Bend test pieces for metallic materials
JIS Z 2248 AMD 1 R:2022 Metallic materials -- Bend test (Amendment 1)
JIS Z 2248 AMD 1:2014 Metallic materials.Bend test (Amendment 1)
JIS Z 2275:1978 Method of plane bending fatigue testing of metal plates
JIS Z 2274:1978 Method of rotating bending fatigue testing of metals
JIS Z 2286:2003 Method for high temperature rotating bending fatigue testing of metallic materials

Korean Agency for Technology and Standards (KATS), sheet metal curvature

KS B 0804-2001(2016) Metallic materials－Bend test
KS B 0804-2001(2021) Metallic materials－Bend test
KS B 0804-2001(2006) Metallic materials－Bend test
KS B ISO 7799:2004 Metallic materials-Sheet and strip 3 mm thick or less-Reverse bend test
KS B ISO 7799:2013 Metallic materials－Sheet and strip 3 mm thick or less－Reverse bend test
KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS
KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS B ISO 8491-2001(2011) Metallic materials Tube(in full section) Bend test
KS B ISO 8491:2001 Metallic materials Tube(in full section) Bend test
KS B ISO 8491:2015 Metallic materials Tube(in full section) Bend test
KS B ISO 7799-2004(2009) Metallic materials－Sheet and strip 3 mm thick or less－Reverse bend test
KS B ISO 1143-2003(2018)
KS B ISO 1143:2003 Metals－Rotating bar bending fatigue testing
KS B 0832-2001 Destructive tests on welds in metallic materials-Bend tests
KS B 0832-1985 Destructive tests on welds in metallic materials-Bend tests
KS B ISO 5173:2021 Destructive tests on welds in metallic materials — Bend tests
KS B ISO 5173:2016 Destructive tests on welds in metallic materials－Bend tests
KS D ISO 24213:2009 Metallic materials-Sheet and strip- Method for springback evaluation in stretch bending
KS D ISO 24213:2013 Metallic materials－Sheet and strip－ Method for springback evaluation in stretch bending

ES-UNE, sheet metal curvature

UNE-EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
UNE 7469:2003 ERRATUM METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE-EN ISO 5173:2011 ERRATUM:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
UNE-EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023)
UNE-EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
UNE-EN ISO 16808:2023 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)

FI-SFS, sheet metal curvature

SFS 3362-1975 Testing of materials. Reverse bend testing of metal sfteet and strip less than 3 mm thick
SFS 3361-1975 Testing of materia/s. Simple bend testing of metal sheet and strip less than 3 mm thick
SFS H.1.36-1965 Metalliputkien taivutuskoe

American National Standards Institute （ANSI), sheet metal curvature

ANSI/ASTM E855:1990 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ANSI/ASTM E646:2000 Test Method for Tensile Strain-Hardening Exponents (N-Values) of Metallic Sheet Materials

AENOR, sheet metal curvature

UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE-EN ISO 7799:2000 METALLIC MATERIALS. SHEET AND STRIP 3 MM THICK OR LESS. REVERSE BEND TEST (ISO 7799:1985)
UNE-EN ISO 8491:2006 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN ISO 5173:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
UNE-EN 14651:2007+A1:2008 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
UNE-EN ISO 12004-2:2010 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)

RO-ASRO, sheet metal curvature

STAS 10417-1975 Tests of metals SIMPLE BEND TEST FOR LIGHT METAL AND LIGHT METAL ALLOY SHEETS AND STRIPS
STAS IS0 8491-1992 Metallic materials. Tube (in full section). Bend test
STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
STAS 12054-1982 TESTING OF METALS BEND TEST OF ON FUSION WELDED PLATINGS
STAS 7737-1990 Tests of metals. Sheets and plates reverse bend test
STAS 8979-1971 Tests of metals SIMPLE BENDING TEST OF STEEL SHEETS AND STRIPS
STAS 2080-1967

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, sheet metal curvature

GB/T 232-1999 Metallic materials--Bend test
GB/T 232-2010 Metallic materials.Bend test
GB/T 235-2013 Metallic materials.Sheet and strip.Reverse bend test
GB/T 238-2002 Metallic materials-Wire-Reverse bend test
GB/T 238-2013 Metallic materials.Wire.Reverse bend test
GB/T 235-1999 Metallic materials--Sheet and strip 3mm thick or less--Reverse bend test
GB/T 32976-2016 Test method for transverse bending of tubes of metallic materials
GB/T 4337-2008 Metallic materials.Fatigue testing.Rotating bar bending method
GB/T 4337-2015 Metallic materials.Fatigue testing.Rotating bar bending method
GB/T 15825.5-1995 Sheet metal formability and test methods--Bending test
GB/T 41859-2022 Sheet metal precise cold bending—Technical specification
GB/T 15825.5-2008 Sheel metal formability and test methods.Part 5:Bending test
GB/T 22565-2008 Metallic materials.Sheet and strip.Method for springback evaluation in stretch bending
GB/T 13665-2007 Test method for damping capacity of metallic damping materials Torsion pendulum method and bending vibration method
GB/T 13665-1992 Test method for damping capacity of metallic damping materials--Torsion pendulum method and flexural resonance method
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 7732-1987 Standard test method for surface-crack fracture toughness Kle of metallie plates
GB/T 24171.2-2009 Metallic materials.Sheet and strip.Determination of forming limit curves.Part 2:Determinations of forming limit curves in laboratory

Taiwan Provincial Standard of the People's Republic of China, sheet metal curvature

CNS 3941-1999 Method of bend test for Metallic materials
CNS 3940-1999 Bend test pieces for metallic materials
CNS 7376-1997 Method of plane bending fatigue testing of metal plates
CNS 7375-1997 Method of rotating bending fatigue testing of metals

AT-ON, sheet metal curvature

ONORM EN 10232-1994 Metallic materials. Tube (in full section). Bend test
OENORM EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
OENORM EN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021)
ONORM B 3646 Teil.4-1986 Roll roofings and prefabricated sheets for waterproofing made of bitumen or modified bitumen; testing; flexibility at low temperatures (cold bending)
OENORM EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
ONORM M 3124 Teil.2-1973 Sheet (sheet and strip) of soft unalloyed steel; cold rolled in a certain tensile strength; Quality Specifications.w

Lithuanian Standards Office , sheet metal curvature

LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
LST EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985)
LST EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
LST EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
LST EN ISO 5173:2010/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd.1:2011)
LST EN 14651+A1-2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
LST EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
LST EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)

PL-PKN, sheet metal curvature

PN-EN ISO 7438-2021-04 E Metallic materials -- Bend test (ISO 7438:2020)
PN H04407-1990 Metals Reverse bend testing of sheet and strip
PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne
PN-EN ISO 12004-2-2021-08 E Metallic materials -- Determination of forming-limit curves for sheet and strip -- Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)

国家市场监督管理总局、中国国家标准化管理委员会, sheet metal curvature

GB/T 244-2020 Metallic material—Tube—Bend test method
GB/T 41049-2021 Test method for flexural properties of fibre metal laminates
GB/T 38806-2020 Metallic materials—Sheet and strip—Test method for bending and folding properties
GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve
GB/T 22565.1-2021 Metallic materials—Sheet and strip—Method for spring back evaluation—Part 1: Stretch bending
GB/T 38684-2020 Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring systems

BE-NBN, sheet metal curvature

NBN-EN 10232-1994 Metallic materials. Tube (in full section). Bend test
NBN-EN 26802-1993 Rubber and plastics hose and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing (ISO 6802:1991)

PT-IPQ, sheet metal curvature

NP 850-1985

Indonesia Standards, sheet metal curvature

SNI 07-4610-1998 Reverse bend test for metallic material sheets and strip, 3 mm thick less
SNI 07-4611-1998 Reverse bend test for metallic material wires
SNI 07-6525-2001 Methods of plane bending fatigue testing of metal plates
SNI 07-4612-1998 Bend tests for metallic material tubes in full section
SNI 05-1194-1989 Metal sheet bending roll machines, Accuracy test methods

IN-BIS, sheet metal curvature

Professional Standard - Agriculture, sheet metal curvature

GB/T 238-1984 Test method for repeated bending of metallic materials

BR-ABNT, sheet metal curvature

Standard Association of Australia （SAA）, sheet metal curvature

AS 2505.1:2004 Metallic materials - Sheet, strip and plate - Bend tests
AS 2505.3:2004 Metallic materials - Tubular products - Bend and related tests
AS/NZS 2205.3.1:2020 Destructive tests on welds in metallic materials, Method 3.1: Bend tests

American Society for Testing and Materials (ASTM), sheet metal curvature

ASTM E855-90(2000) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-08 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-08(2013) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM F382-99 Standard Specification and Test Method for Metallic Bone Plates
ASTM F382-99(2003)e1 Standard Specification and Test Method for Metallic Bone Plates
ASTM A1122/A1122M-22 Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion
ASTM E855-90(1995) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-21 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

Society of Automotive Engineers (SAE), sheet metal curvature

SAE AMS4908F-1988 Titanium Alloy Sheet and Strip, 8Mn, Annealed, 110 ksi (760 MPa) Yield Strength
SAE AMS6386C-2000 Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and 100,000 psi (690 MPa) Yield Strength
SAE AMS4940B-2012 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength

Professional Standard - Ferrous Metallurgy, sheet metal curvature

YB/T 5349-2014 Metallic materials.Determination of bending mechanical porperties

Liaoning Provincial Standard of the People's Republic of China, sheet metal curvature

DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine

HU-MSZT, sheet metal curvature

MSZ 105/22-1979

CH-SNV, sheet metal curvature

VSM 10850-1973

Association of German Mechanical Engineers, sheet metal curvature

DVS 2203-1 Beiblatt 3-2001
DVS 2203-1 Beiblatt 3-2003 Testing of welded joints of thermoplastics sheet and pipes - Requirements - Technological bend test; Bend angle/ram displacement

AR-IRAM, sheet metal curvature

IRAM PROYECTO DE NORMA 106-P.-1944

European Association of Aerospace Industries, sheet metal curvature

AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
AECMA PREN 2002-6-1987 Aerospace Series Test Methods for Metallic Materials Part 6 - Bend Testing Issue P 1
AECMA PREN 2002-6-1999 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing Edition P2
AECMA PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing Edition P 2
AECMA PREN 3071-1997 Aerospace Series Straight Bending of Sheets and Strips in Aluminium and Aluminium Alloys Dimensioning Methods and Calculations of Developed Lengths Edition 1

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, sheet metal curvature

PREN 2002-6-1999 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P2)
PREN 2002-6-1987 Aerospace Series Test Methods for Metallic Materials Part 6 - Bend Testing (Issue P 1)
PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P 2)
PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)

Aerospace, Security and Defence Industries Association of Europe (ASD), sheet metal curvature

ASD-STAN PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P 2)
ASD-STAN PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)

CU-NC, sheet metal curvature

NC 43-08-2-1987 Artificial and Natural Wood Industry. Partiole and Fibre Boards. Determination of Strength to Static Flexure

未注明发布机构, sheet metal curvature

DIN EN ISO 12004-2:2021 Metallic materials – Determination of the forming limit curve for sheets and strips – Part 2: Determination of forming limit curves in the laboratory
DIN EN ISO 6507-3 Bei 1:1998 Metallic materials – Hardness test according to Vickers – Part 3: Calibration of hardness reference plates