ZH
RU
ES

type test

type test, Total:321 items.

In the international standard classification, type test involves: Test conditions and procedures in general, Switchgear and controlgear, Lifting equipment, Rotating machinery, Valves, Electrical accessories, Earth-moving machinery, Shafts and couplings, Industrial trucks, Electrical engineering in general, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE, Cableway equipment, Gears, Fluid storage devices, Continuous handling equipment, Analytical chemistry, Railway rolling stock, Protection against excessive pressure, Construction equipment, Nuclear energy engineering, Mechanical testing, Road engineering, Power transmission and distribution networks, Ventilators. Fans. Air-conditioners, Electrical wires and cables, Shipbuilding and marine structures in general, Construction materials, Electrical and electronic testing, Agricultural machines, implements and equipment, Wood-based panels, Pipeline components and pipelines, Materials and components for railway engineering, Sewing machines and other equipment for the clothing industry, Fluid power systems, Insulating materials, Radiocommunications, Electromagnetic compatibility (EMC), Thermodynamics and temperature measurements, Air quality, Petroleum, petroleum products and natural gas handling equipment, Semiconductor devices, Electromechanical components for electronic and telecommunications equipment.

国家能源局, type test

NB/T 42101-2016 General Guidelines for Type Tests and Type Test Reports of High Voltage Switchgear
NB/T 10318-2019 Type test outline for complete sets of electronic control equipment for wind turbines
NB/T 31143-2018 Technical specifications for type testing of main shaft bearings of direct drive wind turbines
NB/T 31141-2018 Technical specifications for type testing of yaw and pitch bearings of direct-drive wind turbines

British Standards Institution (BSI), type test

BS EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assemblies
BS EN ISO 10497:2022 Tracked Changes. Testing of valves. Fire type-testing requirements
21/30402748 DC BS EN ISO 10497. Testing of valves. Fire type-testing requirements
BS EN 14813-2:2006+A1:2010 Railway applications. Air conditioning for driving cabs. Type tests
BS EN ISO 17871:2015 Gas cylinders. Quick-release cylinder valves. Specification and type testing
BS EN ISO 15996:2005 Gas cylinders - Residual pressure valves - General requirements and type testing
BS EN 12899-5:2007(2008) Fixed, vertical road traffic signs. Initial type testin
14/30302515 DC BS EN 14175-3. Fume cupboards. Part 3. Type test methods
BS EN 13108-20:2016 Tracked Changes. Bituminous mixtures. Material specifications. Type Testing
BS EN 13129-2:2004 Railway applications. Air conditioning for main line rolling stock. Type tests
BS EN 16236:2013 Evaluation of conformity of aggregates. Initial Type Testing and Factory Production Control
BS EN 16236:2018 Assessment and Verification of the Constancy of Performance (AVCP) of aggregates. Type testing and Factory Production Control
BS 7767:1994 Method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
PD 6574:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
BS EN 326-2:2010+A1:2014 Wood-based panels. Sampling, cutting and inspection - Initial type testing and factory production control
BS ISO 10804:2011 Restrained joint systems for ductile iron pipelines. Design rules and type testing
BS ISO 10804:2010 Restrained joint systems for ductile iron pipelines. Design rules and type testing
BS EN ISO 10297:2014+A1:2017 Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes
BS EN 13129:2016 Railway applications. Air conditioning for main line rolling stock. Comfort parameters and type tests
BS EN ISO 15996:2017 Tracked Changes. Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices
BS 594987:2015 Asphalt for roads and other paved areas. Specification for transport, laying, compaction and product-type testing protocols
BS 7933-1:2007 Electric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds
BS EN 16589-1:2022 Tracked Changes. Laboratory local exhaust devices. General requirements and type test methods for articulated extraction arms
BS ISO 10804:2018 Tracked Changes. Restrained joint systems for ductile iron pipelines. Design rules and type testing
PD IEC TR 62271-312:2021 High-voltage switchgear and controlgear. Guidance for the transferability of type tests of high-voltage/low-voltage prefabricated substations
BS EN 1434-4:1997 Heat meters - Pattern approval tests
BS PD IEC TR 62271-312:2021 High-voltage switchgear and controlgear. Guidance for the transferability of type tests of high-voltage/low-voltage prefabricated substations
BS EN 62047-13:2012 Semiconductor devices. Micro-electromechanical devices. Bend-and shear-type test methods of measuring adhesive strength for MEMS structures

Professional Standard - Special Equipment Specification, type test

TSG R7002-2009 Regulation for Type Test of Gas Cylinders
TSG T7007-2016 Elevator Type Test Rules
TSG Q7008-2007 Type Test Rule for Hoist
TSG S7003-2005 Regulation of Type Test for Passenger Ropeway
TSG Q7002-2019 Rules for Type Test of Lifting Machinery
TSG Q7004-2006 Type Test Rule for Tower Crane
TSG Q7002-2007 Type Test Rule for Overhead Crane
TSG Q7003-2007 Type Test Rule for Gantry Crane
TSG Q7006-2007 Type Test Rule for Railway Crane
TSG Q7007-2007 Type Test Rule for Portal Crane
TSG Q7009-2007 Type Test Rule for Cable Grane
TSG Q7010-2007 Type Test Rule for Derrick Crane
TSG Q7011-2006 Type Test Rule for Slewing Jib Crane
TSG Q7005-2008 Type Test Rules for Mobile Crane
TSG D7002-2006 Pressure Piping Components Type Test Regulation
TSG S7005-2005 Type Test Rule of Passenger Ropeway Parts
TSG ZB002-2008 Type Test Rule for Oil and Gas Burners
TSG S7004-2005 Type Test Rule of Passengers Surface Lifts
TSG Q7013-2006 Type Test Rule for Mechanical Parking System
TSG Q7012-2008 Type Test Rule for lifting Equipments
TSG Z7004-2011 Accreditation Criteria on Special Equipment Type Test Agencies
TSG Q7014-2008 Type Test Rule for Safety Accessories and Safety Protection Device for Lifting Appliances

European Committee for Standardization (CEN), type test

prEN 849-1992 Gas cylinder valves; specification and type testing
EN 14175-3:2003 Fume cupboards - Part 3: Type test methods
EN 60439-1:1990 Low-voltage switchgear and controlgear assemblies; part 1: requirements for type-tested and partially type-tested assemblies (IEC 439-1:1985, modified)
EN 60439-1:1990/prA1:1992 Low-voltage switchgear and controlgear assemblies; part 1: requirements for type-tested and partially type-tested assemblies (IEC 439-1:1985/A1:1991)
EN ISO 3807:2013 Gas cylinders - Acetylene cylinders - Basic requirements and type testing
EN 14813-2:2006+A1:2010 Railway applications - Air conditioning for driving cabs - Part 2: Type tests
EN ISO 15996:2017 Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)
EN 16236:2013 Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control
EN 16236:2018 Assessment and Verification of the Constancy of Performance (AVCP) of aggregates - Type testing and Factory Production Control
DD ENV 1170-8-1996 Test Method for Glass-Fibre Reinforced Cement - Part 8: Cyclic Weathering Type Test
EN ISO 28921-2:2017 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing
EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing (Remains Current)
EN ISO 15996:2005 Gas cylinders - Residual pressure valves - General requirements and type testing (Incorporates Amendment A1: 2007)
EN 16589-1:2022 Laboratory local exhaust devices - Part 1: General requirements and type test methods for articulated extraction arms

Professional Standard - Electricity, type test

DL/T 2024-2019 Guidelines for Type Test of Large Condensers

Indonesia Standards, type test

SNI IEC 60439-1:2009 Low-voltage switchgear and controlgear assemblies. Part 1: Type-tested and partially type-tested assemblies
SNI 04-6916-2002 A method of temperature-rise assesment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear

Malaysia Standards, type test

MS 1445 Pt.1-1998

Standard Association of Australia （SAA）, type test

AS 3439.1:1993 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies
AS 4278:1995 A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
AS 4388:1996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear

Taiwan Provincial Standard of the People's Republic of China, type test

CNS 14854-2004 Testing of valves－Fire type-testing requirements

Professional Standard - Non-ferrous Metal, type test

YS/T 1-1991 Type test method for underground scraper

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, type test

GB 7251.1-1997 Low-voltage switchgear and controlgear assemblies. Part 1: Type-tested and partially type-tested assemblies
GB 7251.1-2005 Low-voltage switchgear and controlgear assemblies-Part 1:Type-tested and partially type-tested assemblies
GB/T 33193.2-2016 Air conditioning for main line rolling stock.Part 2:Type tests
GB 567.4-2012 Bursting disc safety devices.Part 4:Type test
GB/T 24277-2009 A method for assessing the short-circuit withstand.Strength of partially type-tested assemblies(PTTA)
GB/T 24276-2009 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies(PTTA) of low-voltage switchgear and controlgear
GB/T 22720.1-2008 Rotating eletrical machines.Qualification and type tests for type Ⅰ electrical insulation systems used in rotating eletrical machines fed from voltage converters

Professional Standard - Machinery, type test

JB/T 7153.3-1993 Tire dozers Method for type test
JB/T 9004.2-1999 Load limiting type of constant filling fluid coupling.Test of type
JB/T 5931.3-1991 Wheel loaders for plateau Method for type test
JB/T 6039.2-1992 Crawler bulldozers for plateau. Test method
JB/T 5077-1991 Universal gear device Method for type test
JB/T 9721-1999 Engineering machinery redcer type test method
JB/T 7695.2-1995 Spreading machines for slip form cement concrete Method for type test
JB/T 4238.3-1986 Type test method for variable-speed hydraulic couplings and hydraulic coupling transmissions
JB/T 4238.3-2005 Variable speed fluid couplings and fluid coupling transmissions-Test-Part 3: Type test method
JB/T 4238.4-1986 Type test technical indicators of speed-regulating hydraulic couplings and hydraulic coupling transmissions
JB/T 4238.4-2005 Variable speed fluid couplings and fluid coupling transmissions-Test-Part 4: Type test technical index

Association Francaise de Normalisation, type test

NF C71-815-2:2002 Essais de type pour les sources centralisées de série
NF C63-421:1994 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 1 : TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES. (EUROPEAN STANDARD EN 60 439-1).
NF X15-203-3*NF EN 14175-3:2019 Fume cupboards - Part 3 : type test methods
NF EN ISO 10297:2014 Bouteilles à gaz - Robinets de bouteilles - Spécifications et essais de type
NF E29-768*NF EN ISO 3807:2013 Gas cylinders - Acetylene cylinders - Basic requirements and type testing
NF E29-673*NF EN ISO 17879:2017 Gas cylinders - Self-closing cylinder valves - Specification and type testing
NF EN ISO 17871:2020 Bouteilles à gaz - Robinets de bouteilles à ouverture rapide - Spécifications et essais de type
NF EN 14175-3:2019 Sorbonnes - Partie 3 : méthodes d'essai de type
NF E29-131*NF EN ISO 17871:2020 Gas cylinders - Quick-release cylinder valves - Specification and type testing
NF E29-131:2015 Gas cylinders - Quick-release cylinder valves - Specification and type testing
NF EN 14813-2+A1:2011 Applications ferroviaires - Conditionnement de l'air pour cabine de conduite - Partie 2 : essais de type
NF EN 14813-2/IN1:2011 Applications ferroviaires - Conditionnement de l'air pour cabine de conduite - Partie 2 : essais de type
NF EN 12899-5:2008 Signaux fixes de signalisation routière verticale - Partie 5 : essai de type initial
NF J38-107:1970 Shipbuilding. Magnetic compasses and accessories. Class A. Type testing and certification.
NF J38-109:1970 Shipbuilding. Binnacles and adjusting devices. Type testing and certification.
NF E29-490-2*NF EN ISO 28921-2:2017 Industrial valves - Isolating valves for low-temperature applications - Part 2 : type testing
NF EN ISO 17879:2017 Bouteilles à gaz - Robinets de bouteilles équipés de clapets auto-obturants - Spécifications et essais de type
NF EN ISO 22435:2007 Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et essais de type
NF F13-813-2*NF EN 14813-2+A1:2011 Railway applications - Air conditioning for driving cabs - Part 2 : type tests
NF F13-813-2/IN1*NF EN 14813-2/IN1:2011 Railway applications - Air conditioning for driving cabs - Part 2 : type tests
NF E29-690:1996 Transportable gas cylinders. Cylinder valves. Specification and type testing.
NF EN ISO 28921-2:2017 Robinetterie industrielle - Robinets d'isolement pour application à basses températures - Partie 2 : essais de type
NF EN 13129:2016 Applications ferroviaires - Conditionnement de l'air pour matériel roulant grandes lignes - Paramètres de bien-être et essais de type
NF F13-016*NF EN 13129:2016 Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests
NF F70-031:1995 Installations fixes ferroviaires - Relais électromécaniques de sécurité - Procédure d'homologation et essais de type.
NF E29-690/A1*NF EN ISO 10297/A1:2017 Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1 : pressure drums and tubes
NF E29-697*NF EN ISO 15996:2017 Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices
NF EN ISO 10297/A1:2017 Bouteilles à gaz - Robinets de bouteilles - Spécifications et essais de type - Amendement 1 : fûts à pression et tubes
NF EN ISO 15996:2017 Bouteilles à gaz - Robinets à pression résiduelle - Spécifications et essais de type de robinets de bouteille intégrant des dispositifs de pression résiduelle
NF EN ISO 22435/A1:2013 Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et essais de type - Amendement 1
NF EN 14750-2:2006 Applications ferroviaires - Conditionnement de l'air pour matériel roulant urbain et banlieue - Partie 2 : essais de type
NF F13-016-2:2005 Railway applications - Air conditioning for main line rolling stock - Part 2 : type tests.
NF EN 326-2+A1:2014 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 2 : essai de type initial et contrôle de la production en usine
NF EN 326-2/IN1:2014 Panneaux à base de bois - Échantillonnage, découpe et contrôle - Partie 2 : essai de type initial et contrôle de la production en usine
NF EN 16589-1:2022 Dispositifs d'aspiration locale de laboratoire - Partie 1 : exigences générales et méthodes d'essais de type pour les bras d'extraction articulés
NF Z84-793*NF EN 300793:1999 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land mobile service - Presentation of equipment for type testing
NF P21-500-2*NF EN 14081-2:2018 Timber structures - Strength graded structural timber with rectangular cross section - Part 2 : machine grading;additional requirements for type testing
NF EN 50156-2:2016 Équipements électriques d'installation de chaudière - Partie 2 : règles pour la conception, le développement et essai de type d'élément sécurité et sous-systèmes

CENELEC - European Committee for Electrotechnical Standardization, type test

EN 60439-1:1994 Low-Voltage Switchgear and Controlgear Assemblies Part 1: Specification for Type-Tested and Partially Type-Tested Assemblies (Incorporates Amendments A1 : 1995 and A11 : 1996)
EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (Incorporates Amendment A1: 2004; Incorporating Corrigendum No. 1)
HD 631.2 S1-2007 Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications

Korean Agency for Technology and Standards (KATS), type test

KS C IEC 60439-1:2003 Low-voltage switchgear and controlgear assemblies－Part 1：Type-tested and partially type-tested assemblies
KS B ISO 3807:2016 Gas cylinders - Acetylene cylinders - Basic requirements and type testing
KS B ISO 3807-2016(2021) Gas cylinders - Acetylene cylinders - Basic requirements and type testing
KS B ISO 10297:2018 Gas cylinders－cylinder valves－Specification and type testing
KS B ISO 10297-2023 Specifications and type tests for refillable gas cylinder valves
KS B ISO 15996:2018 Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices
KS D ISO 10804-1-2006(2011) Restrained joint systems for ductile iron pipelines－Part 1：Design rules and type testing
KS B ISO 10692-2:2014 Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 2: Specification and type testing for valve to cylinder connections
KS B ISO 10692-2:2003 Gas cylinders-Gas cylinder valve connections for use in the micro-electronics industry-Part 2:Specification and type testing for valve to cylinder connections
KS B ISO 10692-2-2014(2019) Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 2: Specification and type testing for valve to cylinder connections

International Organization for Standardization (ISO), type test

ISO 10297:2014 Gas cylinders - Cylinder valves - Specification and type testing
ISO/FDIS 10297:2023 Gas cylinders — Cylinder valves — Specification and type testing
ISO 17871:2015 Gas cylinders — Quick-release cylinder valves — Specification and type testing
ISO 17871:2020 Gas cylinders — Quick-release cylinder valves — Specification and type testing
ISO 3807:2013 Gas cylinders.Acetylene cylinders.Basic requirements and type testing
ISO 10297:2006 Transportable gas cylinders - Cylinder valves - Specification and type testing
ISO 10297:1999 Gas cylinders - Refillable gas cylinder valves - Specification and type testing
ISO 17879:2017 Gas cylinders — Self-closing cylinder valves — Specification and type testing
ISO 15996:2005 Gas cylinders - Residual pressure valves - General requirements and type testing
ISO 17871:2015/Amd 1:2018 Gas cylinders — Quick-release cylinder valves — Specification and type testing — Amendment 1
ISO 10297:2014/Amd 1:2017 Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes
ISO/FDIS 22435:2023 Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
ISO 15996:2017 Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices
ISO 22435:2007/Amd 1:2012 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing; Amendment 1
ISO 10804:2018 Restrained joint systems for ductile iron pipelines — Design rules and type testing
ISO 10692-2:2001 Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 2: Specification and type testing for valve to cylinder connections

KR-KS, type test

KS B ISO 10297-2018(2023) Gas cylinders－cylinder valves－Specification and type testing
KS B ISO 3807-2016 Gas cylinders - Acetylene cylinders - Basic requirements and type testing
KS B ISO 10297-2018 Gas cylinders－cylinder valves－Specification and type testing
KS B ISO 15996-2018 Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices
KS B ISO 15996-2018(2023) Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices

International Electrotechnical Commission (IEC), type test

IEC 60439-1:2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 60439-1/AMD1/COR1:2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies; Corrigendum 1
IEC 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 60439-1/AMD1:2004 Amendment 1 - Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC TR3 60092-390:1997 Electrical installations in ships - Part 390: Cable penetrations - Fire type test procedure
IEC TR3 61117:1992 A method for assessing the short-circuit withstand strength of Partially Type-Tested Assemblies (PTTA)
IEC TR3 60890:1987 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear

ZA-SANS, type test

SANS 60439-1:2004 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies

CEN - European Committee for Standardization, type test

EN 14175-3:2019 Fume cupboards - Part 3: Type test methods
PREN 14175-3-2017 Fume cupboards - Part 3: Type test methods
EN 849:1996 Transportable Gas Cylinders - Cylinder Valves - Specification and Type Testing
EN ISO 17879:2017 Gas cylinders - Self-closing cylinder valves - Specification and type testing
EN 1800:2006 Transportable gas cylinders - Acetylene cylinders - Basic requirements@ definitions and type testing
EN 13129:2016 Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests

Danish Standards Foundation, type test

DS/EN 14175-3:2004 Fume cupboards - Part 3: Type test methods
DS/EN ISO 3807:2013 Gas cylinders - Acetylene cylinders - Basic requirements and type testing
DS/EN ISO 15996:2005 Gas cylinders - Residual pressure valves - General requirements and type testing
DS/EN ISO 10297:2006 Transportable gas cylinders - Cylinder valves - Specification and type testing
DS/EN 14813-2+A1:2011 Railway applications - Air conditioning for driving cabs - Part 2: Type tests
DS/EN 13108-20/AC:2008 Bituminous mixtures - Material specifications - Part 20: Type Testing
DS/EN 13108-20/NA:2008 Bituminous mixtures - Material specifications - Part 20: Type Testing
DS/EN 13108-20:2006 Bituminous mixtures - Material specifications - Part 20: Type Testing
DS/EN ISO 15996/A1:2008 Gas cylinders - Residual pressure valves - General requirements and type testing - Amendment 1
DS/EN 16236:2013 Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control
DS/EN 1800:2007 Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing
DS/EN 13129-2:2004 Railway applications - Air conditioning for main line rolling stock - Part 2: Type tests
DS/EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5: Initial type testing
DS/EN ISO 22435:2008 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing
DS/EN ISO 22435/A1:2013 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing
DS/EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
DS/EN 14750-2:2006 Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests
DS/EN 12966-2:2006 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing
DS/EN 326-2:2011 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
DS/HD 631.1 S2:2008 Electric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds
DS/HD 631.2 S1:2008 Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications
DS/CLC/TR 60890:2004 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
DS/EN 124:1996 Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
DS/IEC TR 62271-312:2021 High-voltage switchgear and controlgear – Part 312: Guidance for the transferability of type tests of high-voltage/low-voltage prefabricated substations
DS/EN ISO 10692-2:2002 Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections

Lithuanian Standards Office , type test

LST EN 14175-3-2004 Fume cupboards - Part 3: Type test methods
LST EN ISO 15996:2005 Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005)
LST EN 14813-2-2006+A1-2011 Railway applications - Air conditioning for driving cabs - Part 2: Type tests
LST EN 13108-20-2006 Bituminous mixtures - Material specifications - Part 20: Type Testing
LST EN 13108-20-2006/AC-2008 Bituminous mixtures - Material specifications - Part 20: Type Testing
LST EN 1800-2007 Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing
LST EN 13129-2-2004 Railway applications - Air conditioning for main line rolling stock - Part 2 : Type tests
LST EN 12899-5-2008 Fixed, vertical road traffic signs - Part 5: Initial type testing
LST EN 1170-8-2009 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
LST EN 14750-2-2006 Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests
LST EN 12966-2-2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing
LST EN ISO 15996:2005/A1:2008 Gas cylinders - Residual pressure valves - General requirements and type testing - Amendment 1 (ISO 15996:2005/Amd 1:2007)
LST EN 326-2-2010 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
LST HD 631.1 S2-2008 Electric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds
LST EN 300 793 V1.1.1-2005 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Land mobile service; Presentation of equipment for type testing
LST HD 631.2 S1-2008 Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications
LST EN 124-1998 Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control

AENOR, type test

UNE-EN 14175-3:2004 Fume cupboards - Part 3: Type test methods
UNE-EN ISO 15996:2006 Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005)
UNE-EN 13108-20:2007 Bituminous mixtures - Material specifications - Part 20: Type Testing
UNE-EN 14813-2:2007+A1:2011 Railway applications - Air conditioning for driving cabs - Part 2: Type tests
UNE-EN 12899-5:2009 Fixed, vertical road traffic signs - Part 5: Initial type testing
UNE-CR 1404:2001 DETERMINATION OF EMISSIONS FROM APPLIANCES BURNING GASEOUS FUELS DURING TYPE-TESTING.
UNE-EN 13129:2017 Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests
UNE-EN 14750-2:2007 Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests
UNE-EN ISO 15996:2006/A1:2008 Gas cylinders - Residual pressure valves - General requirements and type testing - Amendment 1 (ISO 15996:2005/Amd 1:2007)
UNE-EN ISO 3807:2014 Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013, Corrected version 2013-11-15)
UNE-EN 326-2:2011+A1:2015 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control

German Institute for Standardization, type test

DIN EN 14175-3:2019 Fume cupboards - Part 3: Type test methods
DIN EN 14175-3:2019-07 Fume cupboards - Part 3: Type test methods; German version EN 14175-3:2019
DIN 18095-2:1991-03 Smoke control doors; type testing for durability and leakage
DIN EN 60439-1 Bb.2:2009 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies - Guide for testing under conditions of arcing due to an internal fault (IEC/TR 61641:2008)
DIN EN ISO 10297:2006 Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2006); English version of DIN EN ISO 10297:2006-04
DIN EN ISO 3807:2015-02 Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013, Corrected version 2014-11-01); German version EN ISO 3807:2013
DIN EN 13108-20:2016-12 Bituminous mixtures - Material specifications - Part 20: Type Testing; German version EN 13108-20:2016 / Note: DIN EN 13108-20 (2006-07) and DIN EN 13108-20 Berichtigung 1 (2009-05) remain valid alongside this standard until 2018-03-31.
DIN EN 14813-2:2011-01 Railway applications - Air conditioning for driving cabs - Part 2: Type tests; German version EN 14813-2:2006+A1:2010
DIN EN ISO 28921-2:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015); German version EN ISO 28921-2:2017
DIN EN 12899-5:2008-02 Fixed, vertical road traffic signs - Part 5: Initial type testing; German version EN 12899-5:2007 / Note: To be amended by DIN EN 12899-5/A1 (2012-03).
DIN EN 13129:2016-12 Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests; German version EN 13129:2016
DIN EN 1170-8:2009-05 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version EN 1170-8:2008
DIN 42707:1980 Industrial sewing machines; motor with clutch for position drive, typetest
DIN EN ISO 10297:2014 Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014); German version EN ISO 10297:2014
DIN EN 14750-2:2006-08 Railway applications - Air conditioning for urban and suburban rolling stock - Part 2: Type tests; German version EN 14750-2:2006 / Note: To be replaced by DIN EN 14750 (2022-11).
DIN EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing; German version EN 12966-2:2005
DIN EN 326-2:2014-10 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014
DIN EN ISO 17871:2015 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2015); German version EN ISO 17871:2015
DIN EN ISO 17871:2020 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020); German version EN ISO 17871:2020
DIN EN 14750:2022-11 Railway applications - Air conditioning for urban, suburban and regional rolling stock - Comfort parameters and type tests; German and English version prEN 14750:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14750-1 (2006-08)...
DIN EN 16589-1:2023 Laboratory local exhaust devices - Part 1: General requirements and type test methods for articulated extractions arms
DIN EN 16589-1:2023-03 Laboratory local exhaust devices - Part 1: General requirements and type test methods for articulated extractions arms; German version EN 16589-1:2022
DIN EN 16236:2018 Assessment and Verification of the Constancy of Performance (AVCP) of aggregates - Type testing and Factory Production Control; German version EN 16236:2018
DIN EN 14813-2:2011 Railway applications - Air conditioning for driving cabs - Part 2: Type tests; German version EN 14813-2:2006+A1:2010
DIN EN 13129:2016 Railway applications - Air conditioning for main line rolling stock - Comfort parameters and type tests; German version EN 13129:2016
DIN EN ISO 17871:2018 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2015 + Amd 1:2018); German version EN ISO 17871:2015 + A1:2018
DIN SPEC 25716:2020 Heavy duty bags (HDB) made of thermally welded PVC-coated fabrics - Testing of physical and mechanical properties, marking, processing procedures and type tests
DIN EN ISO 10692-2:2003 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001
DIN EN ISO 15996:2017 Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017); German version EN ISO 15996:2017
DIN EN 14081-2/A1:2019 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for type testing; German and English version EN 14081-2:2018/prA1:2019

ES-UNE, type test

UNE-EN 14175-3:2020 Fume cupboards - Part 3: Type test methods
UNE-EN 13108-20:2007/AC:2009 Bituminous mixtures - Material specifications - Part 20: Type Testing
UNE-EN ISO 28921-2:2018 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
ISO/DIS 22435:2023 Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
UNE-EN 1170-8:2009 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test

Professional Standard - Energy, type test

DL/T 2592-2023 Type test regulations for large Francis hydro-generator units
NB/T 20209-2013 Type tests for transducers for rod position detector of nuclear power plants
NB/T 20229-2013 Electrical module type test of safety important instrumentation and control system for nuclear power plants
NB/T 20215-2013 Type test of movable micro-fission chamber for pressurized water reactor nuclear power plants in-core neutron flux measurement
NB/T 20228-2013 Type testing of measuring sensors and transducers of safety important instrumentation and control system for nuclear power plants

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., type test

IEEE 381-1977 CRITERIA FOR TYPE TESTS OF CLASS 1E MODULES USED IN NUCLEAR POWER GENERATING STATIONS
IEEE 382-1972 Trial-Use Guide for Type Test of Class 1 Electric Valve Operators for Nuclear Power Generating Stations
IEEE 383 INT 1-6-2005 Type Test of Class 1E Electric Cables@ Field Splices and Connections for Nuclear Power Generating Stations
IEEE 334-1974 STANDARD FOR TYPE TESTS OF CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS (R 1980) (WITHDRAWN)

BE-NBN, type test

NBN C 63-439-1-1990 Low-voltage switchgear and controlgear assemblies Requirements for type-tested and partially type-tested assemblies

IN-BIS, type test

IS 8623 Pt.1-1993 Specification for low-voltage switchgear and controlgear assemblies. Part 1: Requirements for type-tested and partially type-tested assemblies (First Revision)
IS 4020-1992 Methods of tests for wooden flush door shutters: type tests (First Revision)
IS 13705-1993 Transition joints of cables for working voltages from 11kV up to and including 33kV. Performance requirements and type tests
IS 9920 Pt.4-1985

未注明发布机构, type test

BS EN 849:1997(2002) Transportable gas cylinders — Cylinder valves — Specification and type testing
BS EN ISO 3807:2013(2014) Gas cylinders — Acetylene cylinders — Basic requirements and type testing
BS EN 1800:2006(2007) Transportable gas cylinders — Acetylene cylinders — Basic requirements, definitions and type testing
BS EN ISO 28921-2:2017 Industrial valves — Isolating valves for low - temperature applications Part 2 : Type testing
BS 7767:1994(1999)*IEC 1117:1992 Method for Assessing the short - circuit withstand strength of partially type - tested assemblies (PTTA)
BS 5486-12:1989(1999) Low - voltageswitchgear and controlgear assemblies — Part 12 : Specification for particular requirements of type - tested miniature circuit - breaker boards

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, type test

GB/T 567.4-2012 Bursting disc safety devices － Part 4: Type test

Group Standards of the People's Republic of China, type test

T/CASEI 33001-2019 Specifications for pressure testing machine for metal valve type test
T/GAIA 006.1-2020 The method of performance testing for fume cupboards— Part 1:Type test methods
T/GDC 141-2021 Specification for type test and test report preparation of medium and high voltage switchgear

API - American Petroleum Institute, type test

API STD 622-2011 Type Testing of Process Valve Packing for Fugitive Emissions (Second Edition)
API STD 622-2006 Type Testing of Process Valve Packing for Fugitive Emissions (First Edition)
API STD 622-2018 Type Testing of Process Valve Packing for Fugitive Emissions (THIRD EDITION)
API STD 641-2016 Type Testing of Quarter-turn Valves for Fugitive Emissions (FIRST EDITION)
API STD 624-2014 Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emissions (FIRST EDITION)

Professional Standard - Commodity Inspection, type test

SN/T 0306.5-2012 Rules of the inspection of export fireworks and firecracker.Part 5:Type test

Professional Standard - Agriculture, type test

SN/T 0306.5-2018 Regulations for the Inspection of Fireworks and Firecrackers for Export Part 5: Type Test

Conference of European Post Telecommunication (CEPT), type test

CEPT/ERC/REC 01-06 E-1994 Procedure for Mutual Recognition of Type Testing and Type Approval for Radio Equipment (Brussels 1994)

Professional Standard - Nuclear Industry, type test

EJ/T 705-2006 Type test of class 1E electric cables and field splices for nuclear power plants

IT-UNI, type test

UNI 11801-2020 Type testing for the performance assessment of safety valves for protection against excessive pressure

TR-TSE, type test

TS 2689-1977 High - Voltage Alternatig - Current Circuit - Breakers Part 4 : Type Tests And Routine Tests

Professional Standard - Petroleum, type test

SY/T 5207-1987 Piston cylinder type test for pneumatic components used in petroleum drilling and production equipment

Institute of Electrical and Electronics Engineers (IEEE), type test

IEEE 383-1974 Type test of class 1E electric cables; field splices and connections for nuclear power generating stations
ANSI/IEEE Std 381-1977 IEEE Standard Criteria for Type Tests of Class 1E Modules Used in Nuclear Power Generating Stations
ANSI/IEEE Std 334-1974 IEEE Standard for Type Tests of Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
ANSI/IEEE Std 383-1974 IEEE Standard for Type Test of Class 1E Electric Cables, Field Splices, and Connections for Nuclear Power Generating Stations

PL-PKN, type test

PN-EN ISO 17871-2021-02 E Gas cylinders -- Quick-release cylinder valves -- Specification and type testing (ISO 17871:2020)

Professional Standard - Coal, type test

MT 98-1984 Specification for type test of hydraulic support hose assembly and intermediate joint components

RU-GOST R, type test

GOST 25836-1983 Tractors. Testing types and programs

国家市场监督管理总局、中国国家标准化管理委员会, type test

GB/T 36173-2018 Restrained joint systems for ductile iron pipelines—Design rules and type testing
GB/T 38658-2020 Guidance for the extension of validity of type tests of AC metal enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV

ETSI - European Telecommunications Standards Institute, type test

PRETS 300 793-1996 Radio Equipment and Systems (RES); Land Mobile Service; Presentation of Equipment for Type Testing
ETSI EN 300 793:1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Presentation of Equipment for Type Testing (V1.1.1)
ETSI EN 300 793:1997 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Presentation of Equipment for Type Testing (V1.1.1)

SE-SIS, type test

SIS SS 82 56 10-1988 Gully tops and manhole tops for vehicular and pedestrian areas -Design requirements, type testing, marking

European Committee for Electrotechnical Standardization（CENELEC）, type test

HD 631.1 S2-2007 Electric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds
HD 528 S1-1989 A Method of Temperature - Rise Assessment by Extrapolation for Partially Type-Tested Assemblies (PTTA) of Low Voltage Switchgear and Controlgear

Association of German Mechanical Engineers, type test

VDI 4205 Blatt 4-2005 Measurement and test methods for the assessment of vapour recovery systems on filling stations - Type test of active vapour recovery systems