ZH
RU
ES

nozzle

nozzle, Total:499 items.

In the international standard classification, nozzle involves: Textile machinery, Protection against fire, Horology, Lubrication systems, Internal combustion engines for road vehicles, Equipment for the chemical industry, Fluid power systems, Road vehicle systems, Barrels. Drums. Canisters, Installations in buildings, Surface treatment and coating, Valves, Internal combustion engines, On-board equipment and instruments, Pipeline components and pipelines, Ceramics, Petroleum, petroleum products and natural gas handling equipment, Measurement of fluid flow, Ground service and maintenance equipment, Materials for aerospace construction, Vocabularies, Burners. Boilers, Linear and angular measurements, Diagnostic, maintenance and test equipment, Shipbuilding and marine structures in general, Energy and heat transfer engineering in general, Welding, brazing and soldering, Aerospace engines and propulsion systems, Hydraulic energy engineering, Agricultural machines, implements and equipment, Lubricants, industrial oils and related products, Electrical engineering in general, Refractories, Mining equipment, Equipment for petroleum and natural gas industries, Pumps, Lighting, Fluid storage devices, Earth-moving machinery, Hand-held tools, Floor treatment appliances, Bearings.


CZ-CSN, nozzle

CH-SNV, nozzle

  • SN ISO 105/B01:1984 Textiles — Tests for colour fastnessSection B01: Colour fastness to light: Daylight
  • SN 197 432-1984 Linear density of yarns and twists - Titer
  • SNV 29619-1966 Textiles — Tests for colour fastness Section S02: Colour fastness to vulcanizing: Sulphur monochloride
  • SN ISO 105/X10:1984
  • SN EN ISO 5167-3:2021 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2019)

HU-MSZT, nozzle

Professional Standard - Textile, nozzle

Korean Agency for Technology and Standards (KATS), nozzle

AENOR, nozzle

  • UNE 23410-1:1994 WATER NOZZLES FOR FIRE FIGHTING. PART 1: CONVENTIONAL NOZZLES.
  • UNE 26476:1998 ROAD VEHICLES. NOZZLE SPOUTS FOR UNLEADED GASOLINE.
  • UNE 10074:1979 FUEL INJECTION NOZZLES. SIZE S.
  • UNE-EN 299:2010 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
  • UNE 10084:1979 ROAD VEHICLES. CALIBRATING NOZZLE DELAY PINTLE TYPE.
  • UNE 26477:1998 ROAD VEHICLES. NOZZLE SPOUTS FOR LEADED GASOLINE AND DIESEL FUEL.
  • UNE-EN ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003)
  • UNE-EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
  • UNE 68055:1982 AGRICULTURAL MACHINERY. EQUIPMENT FOR CROP PROTECTION. SPRAYERS NOZZLES. TEST METHODS

YU-JUS, nozzle

German Institute for Standardization, nozzle

  • DIN 14200:1979 Nozzle discharge
  • DIN 28151:1999 Nozzles of jacket on agitated vessels, of glass lined steel - Position of nozzles
  • DIN 28151:2021-10 Nozzles of jacket on agitated vessels, of glass lined steel - Position of nozzles
  • DIN 28151:2021 Nozzles of jacket on agitated vessels, of glass lined steel - Position of nozzles
  • DIN 20038:1990-10 Hose fittings; coupling nozzles
  • DIN 12338:1970-05 Crystallizing dishes with spout
  • DIN 14494:1979 Water spray systems, fixed, with open nozzles
  • DIN 28115:2003 Carbon steel nozzles - PN 10 to PN 40
  • DIN 8535:1970-01 Pneumatic tools, screw nozzle tips
  • DIN 8536:1970-10 Pneumatic tools; transition nozzle tips
  • DIN 12337:1970-05 Crystallizing dishes without spout
  • DIN 28115:2003-02 Carbon steel nozzles - PN 10 to PN 40
  • DIN 73372:1978-08 Fuel injection nozzles, size T and U
  • DIN 28025:2003 Nozzles of stainless steel - PN 10 to PN 40
  • DIN 28025:2003-02 Nozzles of stainless steel - PN 10 to PN 40
  • DIN EN 293:1992 Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992
  • DIN EN 293:1992-06 Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992
  • DIN 5042-7:1988-12 Combustion lamps and gas luminaires; fixed nozzles
  • DIN ISO 2697:2002-05 Diesel engines - Fuel nozzles - Size "S" (ISO 2697:1999)
  • DIN EN 299:2009-11 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics; German version EN 299:2009
  • DIN EN ISO 5167-3:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003
  • DIN 20035:1990-10 Hose fittings; flange nozzle; nominal pressure 16
  • DIN ISO 4010:1978 Calibrating Nozzle, Delay Pintle Type
  • DIN ISO 3539:1981-12 Road vehicles; injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
  • DIN EN ISO 9300:2021-09 Measurement of gas flow by means of critical flow nozzles (ISO/DIS 9300:2021); German and English version prEN ISO 9300:2021 / Note: Date of issue 2021-07-30*Intended as replacement for DIN EN ISO 9300 (2005-11).
  • DIN 20033:1990-07 Hose fittings; tapered nozzle with clamping nut
  • DIN 3528:1986 Valves for gas installations; nozzles with gasket
  • DIN EN 14972-10:2022-06 Fixed firefighting systems - Water mist systems - Part 10: Test protocol for atrium protection with sidewall nozzles for open nozzle systems; German version EN 14972-10:2022
  • DIN 11210:1982-10 Agricultural machinery; band sprayer; connection dimensions for nozzleholders
  • DIN 5042-7:1988 Combustion lamps and gas luminaires; fixed nozzles
  • DIN 4661-4:1968 Gas cylinders, welded steel gas cylinders; nozzles
  • DIN EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005); English version of DIN EN ISO 9300
  • DIN ISO 9158:1989-05 Road vehicles; nozzle spouts for unleaded gasoline; identical with ISO 9158:1988
  • DIN 11215:1978-07 Agricultural machinery; sprayers for crop protection, connection dimensions for nozzles
  • DIN 11210:1982 Agricultural machinery; band sprayer; connection dimensions for nozzleholders
  • DIN EN 14972-10:2022 Fixed firefighting systems - Water mist systems - Part 10: Test protocol for atrium protection with sidewall nozzles for open nozzle systems
  • DIN EN ISO 9300:2005-11 Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005); German version EN ISO 9300:2005 / Note: To be replaced by DIN EN ISO 9300 (2021-09).
  • DIN 8537:1970-10 Pneumatic tools; cone nozzle tips, connection nuts, connection nipples
  • DIN EN ISO 9300:2023-11 Measurement of gas flow by means of critical flow nozzles (ISO 9300:2022); German version EN ISO 9300:2022
  • DIN 11215:1978 Agricultural machinery; sprayers for crop protection, connection dimensions for nozzles
  • DIN 24375:1981 Surface treatment; flat-stream nozzles for airless spray guns; dimensions, testing, marking
  • DIN 24375:1981-06 Surface treatment; flat-stream nozzles for airless spray guns; dimensions, testing, marking
  • DIN 7589:1994 Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
  • DIN 7588:1994 Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
  • DIN EN ISO 5167-3:2019 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO/DIS 5167-3:2019); German and English version prEN ISO 5167-3:2019
  • DIN EN ISO 20182:2008-04 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008); German version EN ISO 20182:2008
  • DIN EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics; English version of DIN EN 299:2009-11

UNKNOWN, nozzle

Professional Standard - Ferrous Metallurgy, nozzle

SE-SIS, nozzle

U.S. Military Regulations and Norms, nozzle

Japanese Industrial Standards Committee (JISC), nozzle

SAE - SAE International, nozzle

Society of Automotive Engineers (SAE), nozzle

Professional Standard - Machinery, nozzle

National Sanitation Foundation (NSF), nozzle

Professional Standard - Automobile, nozzle

IN-BIS, nozzle

Professional Standard - Military and Civilian Products, nozzle

Professional Standard - Aviation, nozzle

  • HB 7640-1999 Centralized air supply nozzle
  • HB 7641-1999 Centralized air supply nozzle technical requirements
  • HB 6813.4-1993 Parts nozzles for measuring tools of pneumatic measuring instruments
  • HB 7667-2000 Aeroengine fuel nozzle performance test
  • HB 6813.3-1993 Parts nozzles for measuring tools of pneumatic measuring instruments (D=5~8)
  • HB 6813.10-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)
  • HB 6813.11-1993 Nozzle body for measuring tools of pneumatic measuring instruments (L=58~78)

KR-KS, nozzle

工业和信息化部/国家能源局, nozzle

Group Standards of the People's Republic of China, nozzle

American National Standards Institute （ANSI), nozzle

BE-NBN, nozzle

Underwriters Laboratories (UL), nozzle

  • UL 2351-2004 UL Standard for Safety Spray Nozzles for Fire-Protection Service (Second Edition; Reprint with Revisions Through and Including June 3, 2014)
  • UL 1238A-2012 Battery operated hose nozzle valve readers
  • UL 2167 BULLETIN-2001 UL Standard for Safety Water Mist Nozzles for Fire Protection Service
  • UL 2167 BULLETIN-2003 UL Standard for Safety Water Mist Nozzles for Fire Protection Service
  • UL 2351 BULLETIN-2002 UL Standard for Safety Spray Nozzles for Fire-Protection Service
  • UL 2351 BULLETIN-2004 UL Standard for Safety Spray Nozzles for Fire-Protection Service
  • UL 2167-2002 UL Standard for Safety Water Mist Nozzles for Fire Protection Service (First Edition)

National Fire Protection Association (NFPA), nozzle

Institute of Electrical and Electronics Engineers (IEEE), nozzle

American Society of Mechanical Engineers (ASME), nozzle

  • ASME N-565-2001 Alternative Methods of Nozzle Attachment for Class 1 Vessels Section III, Division 1
  • ASME SEC VIII D2 ART D-6-2002 Article D-6 Nozzles and Other Connections
  • ASME N-619-2001 Alternative Requirements for Nozzle Inner Radius Inspections for Class 1 Pressurizer and Steam Generator Nozzles Section XI, Division 1
  • ASME MFC-7M-1987 Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
  • ASME N-575-2001 Alternative Examination Requirements for Full Penetration Nozzle-to-Vessel Welds in Reactor Vessels with Set-On Type Nozzles Section XI, Division 1
  • ASME N-702-2001 Alternative Requirements for Boiling Water Reactor (BWR) Nozzle Inner Radius and Nozzle-to-Shell Welds Section XI, Division 1; (SUPP 12)
  • ASME 2148-2001 Use of Rod and Bar for Nozzle Necks Section VIII, Division 1

GOSTR, nozzle

International Organization for Standardization (ISO), nozzle

  • ISO 6182-14:2019 Fire protection — Automatic nozzle systems — Part 14: Requirements and test methods for water spray nozzles
  • ISO 7026:1990 Road vehicles; screw-in injection nozzle holders, types 20, 21 and 27 for pintle nozzle size "S", type "B"
  • ISO 7026:1981 Road vehicles — Screw-in injection nozzle holder types 20 and 21 for pintle nozzle size "S", type "B"
  • ISO 4010:1977 Road vehicles — Calibrating nozzle, delay pintle type
  • ISO 9300:2022 Measurement of gas flow by means of critical flow nozzles
  • ISO 5167-3:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
  • ISO 5167-6:2019 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
  • ISO/CD 20182 Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns
  • ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
  • ISO 7026:1997 Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B"
  • ISO 20182:2008 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns
  • ISO 7030:1981 Road vehicles — Screw-mounted injection nozzle holder, types 12, 13, 14, 15, 16, 17, 18 and 19
  • ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 6392-2:1996 Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles
  • ISO 9300:1990 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 5167-3:2020 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
  • ISO/TR 21784:2018 Plain bearings - Spray nozzle type directed lubrication for tilting pad bearings
  • ISO 11545:2001 Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution

Defense Logistics Agency, nozzle

NL-NEN, nozzle

RU-GOST R, nozzle

  • GOST R 50399-1992 Air-foam nozzies. Specifications
  • GOST 11101-1973 Air-foam nozzle. Specifications
  • GOST 17612-1989 Ceramic acid-resistant pocking rings. Specifications
  • GOST R ISO 9158-1993 Road vehicles. Nozzle spouts for unleaded gasoline
  • GOST R 54441-2011 Heating boilers. Part 2. Heating boilers with forsed draught burner. Special requirements for boilers with atomizing oil burners
  • GOST R 54441-2011(2019) Heating boilers. Part 2. Heating boilers with forsed draught burner. Special requirements for boilers with atomizing oil burners
  • GOST R ISO 9159-1993 Road vehicles. Nozzle spouts for leaded gasoline and diesel fuel
  • GOST 23689-1979 Mechanical atomizing and mechanical steam-atomizing burners. Types and basic parameters. General technical requirements
  • GOST ISO 5682-1-2004 Equipment for crop protection. Spraying equipment. Part 1. Test methods for sprayer nozzles
  • GOST 8.586.3-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements

United States Navy, nozzle

American Water Works Association (AWWA), nozzle

工业和信息化部, nozzle

VN-TCVN, nozzle

Association Francaise de Normalisation, nozzle

  • NF R16-319:1992 Road vehicles. Screw-in injection nozzle holders, types 20, 21 and 27 for pintle nozzle size "S", type "B".
  • NF ISO 10072:2004 Outillage de moulage - Buses d'injection - Dimensions
  • NF E31-320*NF EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
  • NF E31-319*NF EN 293:1992 Oil pressure atomizing nozzles. Minimum requirements. Testing.
  • NF ISO 9158:1988 Véhicules routiers - Pistolets de remplissage pour essence sans plomb
  • NF L29-050*NF EN 3908:2017 Nipples, lubricating, axial type, in corrosion resisting steel, passivated
  • NF E31-353:1989 Heating and fuel-burning equipement. Automatic domestic fuel oil boilers fitted with atomizing burners and rated power less than or equal to 300 kw.
  • NF T51-075:1986 Plastics. Fire behaviour. Needle burner test.
  • NF X10-102-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3 : nozzles and Venturi nozzles.
  • NF EN ISO 5167-3:2022 Mesurage du débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire - Partie 3 : Tuyères et Venturi-tuyères
  • NF EN 15767-1:2009 Équipement portable de projection d'agents d'extinction alimenté par des pompes à usage incendie - Lances-canon portables - Partie 1 : prescriptions générales pour les ensembles lances-canons portables
  • NF S61-820:2001 Firefighting and rescue service equipment - Hand-held nozzles for firefighting.
  • NF ISO 9159:1988 Véhicules routiers - Pistolets de remplissage pour essence au plomb et carburant diesel
  • NF EN ISO 16380:2018 Véhicules routiers - Pistolet de remplissage pour les mélanges de carburants gazeux
  • NF EN 14972-10:2022 Installations fixes de lutte contre l'incendie - Systèmes à brouillard d'eau - Partie 10 : protocole d'essai des systèmes à buses ouvertes pour protection d'atrium avec buses murales
  • NF B40-671*NF EN ISO 20182:2008 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns
  • NF X10-150*NF EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • NF X10-150:1995 Measurement of gas flow by means of critical flow venturi nozzles.
  • NF D35-325:1986 HEATING. GAS. LIQUID FUEL. SOLID FUEL. DOMESTIC STORAGE WATER HEATERS WITH ATMOSPHERIC BURNERS BURNING GAS. WATER HEATERS.
  • NF ISO 10625:2018 Matériel de protection des cultures - Buses de pulvérisation - Code de couleur pour l'identification
  • NF ISO 14710:1997 Matériel de protection des cultures - Pulvérisateurs à jet porté - Dimensions des écrous-raccords de buse.
  • NF S62-235-10*NF EN 14972-10:2022 Fixed firefighting systems - Water mist systems - Part 10 : test protocol for atrium protection with sidewall nozzles for open nozzle systems
  • NF E86-600*NF EN 13012:2021 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
  • NF EN 15182-2:2019 Équipement portable de projection d'agents d'extinction alimenté par des pompes à usage incendie - Lances à main destinées aux services d'incendie et de secours - Partie 2 : lances combinées PN 16
  • NF R16-331*NF ISO 8356:1986 Road vehicles. Diesel engines. Screw-in injector, type 22.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., nozzle

  • ASHRAE 3919-1995 Nozzle-Sprayed Flow Rate Distribution on a Horizontal Tube Bundle
  • ASHRAE 3845-1995 Evaporation Heat Transfer Performance of Nozzle-Sprayed Ammonia on a Horizontal Tube
  • ASHRAE 4059-1997 Performance of Nozzle-Sprayed Ammonia Evaporator with Square-Pitch Plain-Tube Bundle (RP 725)
  • ASHRAE 4370-2000 Velocity Decay in Air Jets for HVAC Applications
  • ASHRAE CH-03-6-4-2003 Improving Airflow Measurements by a New Inlet Nozzle Contour
  • ASHRAE 4827-2006 Comparison of SPIV Measurements for Different Test Room Air Inlet Nozzle Configurations

U.S. Air Force, nozzle

PL-PKN, nozzle

  • PN M75161-1991 Hoses nozzles for flexible hoses
  • PN BN 3744-08-1965
  • PN L01270-1992 Aircraft. Fuel nozzle grounding plugs and sockets
  • PN S36005-1970 Internal combustion engines Corburettor nozzles Requirem?nts and tests
  • PN M51068-1974 Fire fighting e?uipment Foam making branch (nozzle) Technical reauirements
  • PN M35003-1989 Industrial gas burners Pilot burner and pilot-flame burner Re?uirements
  • PN-EN ISO 5167-3-2021-03 E Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2019)

TH-TISI, nozzle

European Committee for Standardization (CEN), nozzle

  • prEN 676-1992 Forced draught burners for gaseous fuels
  • DD ENV 299-1992 Oil pressure atomizing nozzles; angle and spray characteristics
  • EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
  • EN 293:1992 Oil Pressure Atomizing Nozzles - Minimum Requirements - Testing
  • EN ISO 5167-3:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2022)
  • EN ISO 20182:2008 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008)
  • EN 303-2:1998 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
  • EN ISO 9300:1995 Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles (ISO 9300 : 1990)
  • EN ISO 9300:2022 Measurement of gas flow by means of critical flow nozzles (ISO 9300:2022)
  • FprEN 14972-10-2021 Fixed firefighting systems - Water mist systems - Part 10: Test protocol for atrium protection with sidewall nozzles for open nozzle systems
  • EN 303-2:2017 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
  • EN 303-2:1992 Heating boilers; heating boilers with forced draught burners; part 2: special requirements for boilers with atomizing oil burners
  • EN ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003)

Professional Standard - Chemical Industry, nozzle

British Standards Institution (BSI), nozzle

  • BS ISO 7026:1998 Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'
  • BS EN ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Nozzles and Venturi nozzles
  • BS ISO 2697:1999 Diesel engines - Fuel nozzles - Size "S"
  • BS ISO 2697:2000 Diesel engines - Fuel nozzles - Size "S"
  • BS EN 299:2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
  • BS ISO 7026:1997 Diesel engines. Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'
  • BS EN 293:1992 Specification for oil pressure atomizing nozzles - Minimum requirements - Testing
  • BS ISO 4010:1998 Diesel engines - Calibrating nozzle, delay pintle type
  • BS EN ISO 5167-3:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Nozzles and Venturi nozzles
  • BS EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • 19/30400422 DC BS EN 14972-10. Fixed firefighting systems. Water mist systems - Part 10. Test protocol for atrium protection with sidewall nozzles for open nozzle systems
  • BS ISO 14681:1998 Diesel engines - Fuel injection pump testing - Calibrating fuel injectors
  • BS ISO 9102:1997 Diesel engines - Screw-in injection nozzle holders types 24, 25, 26 and 26.1
  • BS ISO 9102:1998 Diesel engines - Screw-in injection nozzle holders types 24, 25, 26 and 26.1

Danish Standards Foundation, nozzle

  • DS/ENV 299:1994 Oil pressure atomizing nozzels. Angle and spray characteristics
  • DS/EN 293:1993 Oil pressure atomizing nozzles. Minimum requirements. Testing
  • DS/EN 299:2010 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
  • DS/EN ISO 9300:1995 Measurement of gas flow by means of critical flow Venturi nozzles
  • DS/EN ISO 20182:2008 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns
  • DS/EN ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
  • DS/EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
  • DS/EN ISO 9300:2007 Measurement of gas flow by means of critical flow Venturi nozzles

RO-ASRO, nozzle

  • STAS 9420-1987 Compression ignition engines SPRAY NOZZLES Dimensions
  • STAS 9421-1987 Compression ignition engines S SIZE INJECTION NOZZLES Dimensions
  • STAS 9927-1988 Crop protection machines SPRAYERS AND SPRAY1NG NOZZLES Connecting dimensions
  • STAS 11200/483-1982 GRAPHICAL SYMBOL FOR PLASMA TORCH CONNECTION + NOZZLE (POSITIVE SUPPLY)

Canadian Standards Association (CSA), nozzle

American Society for Testing and Materials (ASTM), nozzle

  • ASTM F1546/F1546M-96 Standard Specification for Fire Hose Nozzles
  • ASTM F1546-23 Standard Specification for Fire Hose Nozzles
  • ASTM F1546-96(2018) Standard Specification for Fire Hose Nozzles
  • ASTM E641-01(2012)e1 Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
  • ASTM E641-01 Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
  • ASTM E641-85(2000) Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
  • ASTM E641-01(2006) Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
  • ASTM E641-21 Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
  • ASTM F922-01 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
  • ASTM F922-01(2023) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle

AWS - American Welding Society, nozzle

  • C4.5M-2006 Uniform Designation System for Oxyfuel Nozzles
  • C4.5M-2000 Uniform Designation System for Oxyfuel Nozzles
  • C4.5M-2012 Uniform Designation System for Oxyfuel Nozzles (3rd Edition)

FI-SFS, nozzle

ACI - American Concrete Institute, nozzle

GM Global, nozzle

  • GMW 16642-2011 Headlamp Washer Systems/High Pressure Nozzle Jets or Nozzle Jets with Telescopic Drives Issue 1; English

GB-REG, nozzle

National Metrological Verification Regulations of the People's Republic of China, nozzle

  • JJG 620-2008 Verification Regulation of Critical Flow Venturi Nozzle

US-FCR, nozzle

Lithuanian Standards Office , nozzle

  • LST EN 293-2001 Oil pressure atomizing nozzles - Minimum requirements - Testing
  • LST EN 299-2009 Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
  • LST EN ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003)
  • LST EN ISO 5167-3:2020 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2019)
  • LST EN 13012-2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
  • LST EN ISO 20182:2008 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008)

ES-UNE, nozzle

  • UNE 9293:1993 Oil pressure atomizing nozzles - Minimum requirements - Testing
  • UNE-EN ISO 9300:2023 Measurement of gas flow by means of critical flow nozzles (ISO 9300:2022)
  • UNE-EN 14972-10:2022 Fixed firefighting systems - Water mist systems - Part 10: Test protocol for atrium protection with sidewall nozzles for open nozzle systems
  • UNE-EN ISO 5167-3:2021 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2020)
  • UNE-EN 13012:2022 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers

AT-ON, nozzle

  • ONORM V 5140-1988 Nozzle spouts and tank filier openings for refueling of road vehicles
  • ONORM F 2190-1989 Multi purpose nozzles;　requirements, testing, marking of conformity　
  • ONORM F 2191-1990 Multi-purpose adjustable nozzles; requirements, testing, marking of conformity
  • OENORM EN ISO 5167-3:2021 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2020)
  • OENORM EN 13012-2021 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
  • ONORM ENV 299-1992 Oil pressure atomizing nozzles - Angle and spray characteristics

Professional Standard - Coal, nozzle

  • MT/T 240-1997 General specification for the water nozzle to control dusts in coal mine
  • MT/T 662-1997 Spraying nozle for shearer.Outlet diameters and connecting threads
  • MT/T 662-2007 Spraying nozzle for shearer-Outlet diameters and connecting threads

Professional Standard - Traffic, nozzle

  • JT/T 638-2005 Cleaning and detecting instrument for spray nozzles of vehicle engine

Professional Standard - Civil Aviation, nozzle

未注明发布机构, nozzle

  • BS G 175:1959(2000) Aircraft fuel nozzle grounding plugs and sockets
  • BS EN 14972-10:2022 Fixed firefighting systems — Water mist systems Part 10 : Test protocol for atrium protection with sidewall nozzles for open nozzle systems
  • DIN EN 1360:2005 Rubber and plastic nozzle hoses and hose lines – requirements
  • DIN EN ISO 9300:1995 Measurement of gas flow by means of critical flow Venturi nozzles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, nozzle

  • GB/T 10826.3-2008 Fuel injection equipment.Vocabulary.Part 3:Unit injectors
  • GB/T 2624.3-2006 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles
  • GB/T 21188-2007 Measurement of gas flow by means of critical flow Venturi nozzles
  • GB/T 26549-2011 Turbocharger variable nozzle ring.General specifications

Professional Standard - Petrochemical Industry, nozzle

  • SH/T 0764-2005 Test method for diesel engine injector nozzle coking test (XUD-9)

Taiwan Provincial Standard of the People's Republic of China, nozzle

  • CNS 11872-1987 Measurement of Fluid Flow by Means of Orifice Plates or Nozzles
  • CNS 11177-1989 Hoses, Nozzles, Nozzle Valves and Hoses Reel for Moveable Carbon Dioxide,Halon and Dry Chemical Power of Fire Extinguise

US-HI, nozzle

  • HI 9.6.2-2001 Centrifugal and Vertical Pumps for Allowable Nozzle Loads
  • HI 9.6.2-2011 Rotodynamic Pumps for Assessment of Applied Nozzle Loads

Professional Standard - Energy, nozzle

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, nozzle

  • GB/T 34166-2017 Measumement of natural gas flow by means of standard nozzle meters

Underwriter Laboratories of Canada (ULC), nozzle

American Welding Society (AWS), nozzle

  • AWS C4.5M-2000 Uniform Designation System for Oxyfuel Nozzles Errata:2000
  • AWS C4.5M-2006 Uniform Designation System for Oxyfuel Nozzles
  • WRC 219:1976 Experimental Investigation of Limit Loads of Nozzles In Cylindrical Vessels
  • WRC 089:1963(1977) Experimental Investigation Of Stresses In Nozzles In Cylindrical Pressure Vessels
  • WRC 451:2000 Internal Pressure Design Of Isolated Nozzles In Cylindrical Vessels With d/D Up To And Including 1.00: Report No. 1: Code Rules For Internal Pressure Design Of Isolated Nozzles In Cylindrical Vessels

IT-UNI, nozzle

  • UNI EN ISO 5167-3:2021 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles

WRC - Welding Research Council, nozzle

  • BULLETIN 90-1963 A CRITICAL STUDY OF THE SOLUTIONS OF THE ASYMMETRIC BENDING OF SPHERICAL SHELLS SOLUTIONS FOR THE STRESSES AT NOZZLES IN PRESSURE VESSELS STRESS CONCENTRATION FACTORS FOR THE STRESSES AT NOZZLE INTERS
  • BULLETIN 89-1963 EXPERIMENTAL INVESTIGATION OF STRESSES IN NOZZLES IN CYLINDRICAL PRESSURE VESSELS
  • BULLETIN 219-1976 EXPERIMENTAL INVESTIGATION OF LIMIT LOADS OF NOZZLES IN CYLINDRICAL VESSELS

PH-BPS, nozzle

PT-IPQ, nozzle

  • NP 2185-1988 Small tools Gingle point cutting tools. Corner radii

National Aeronautics and Space Administration (NASA), nozzle

US-GSA, nozzle

BELST, nozzle

  • STB 11.16.06-2011/GOST R 51043-2002 Fire safety standards system. Automatic water and foam fire fighting systems. Sprinklers, spray nozzles and water mist nozzles. General technical requirements. Test methods

Standard Association of Australia （SAA）, nozzle

  • AS ISO 5167.3:2023 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full, Part 3: Nozzles and Venturi nozzles
  • AS ISO 6392.2:2021 Earth-moving machinery — Lubrication fittings, Part 2: Grease-gun nozzles

CEN - European Committee for Standardization, nozzle

  • PREN 13012-2018 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers

  nozzle seat, fluid nozzle, nozzle seat, nozzle, nozzle, needle nozzle, air nozzle, Purpose Nozzle, fire nozzle, fire nozzle, Nozzle check, nozzle contamination, seal nozzle, standard nozzle, oxygen nozzle, nozzle tool, oxygen nozzle, carbon steel nozzle, oil nozzle, nozzle pressure.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved