ZH
RU
ES

before and after regulating valve

before and after regulating valve, Total:330 items.

In the international standard classification, before and after regulating valve involves: Valves, Power stations in general, Ventilators. Fans. Air-conditioners, Refrigerating technology, Fuels, Acoustics and acoustic measurements, Industrial automation systems, Burners. Boilers, Aircraft and space vehicles in general, Installations in buildings, Internal combustion engines for road vehicles, Internal combustion engines, Nuclear energy engineering, Railway rolling stock, Fluid power systems, Galvanic cells and batteries, Medical equipment, Machine tools, Fluid storage devices, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Road vehicle systems, Vacuum technology, Graphical symbols, Mining equipment, Agricultural machines, implements and equipment, Semiconductor devices, Hospital equipment, Protection against fire, Protection against excessive pressure, Domestic electrical appliances in general, Vocabularies, Spices and condiments. Food additives, Equipment for petroleum and natural gas industries, Protection against dangerous goods, Materials for aerospace construction, Aerospace electric equipment and systems.


SE-SIS, before and after regulating valve

United States Navy, before and after regulating valve

Association Francaise de Normalisation, before and after regulating valve

  • NF C46-525:1991 Industrial-process control valves. Control valve data sheet.
  • NF C46-525*NF EN 60534-7:2012 Industrial-process control valves - Part 7 : control valve data sheet
  • NF C46-502:1993 Industrial-process control valves. Part 1 : control valve terminology and general considerations.
  • NF C46-518:1988 INDUSTRIAL-PROCESS CONTROL VALVES. MOUNTING DETAILS FOR ATTACHMENT OF POSITIONERS TO CONTROL VALVE ACTUATORS.
  • NF C46-511*NF EN 60534-3-2:2001 Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.
  • NF C46-512*NF EN 60534-3-3:1999 Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.
  • NF C46-630*NF EN 60534-6-1:1998 Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.
  • NF C46-519:2001 Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.
  • NF S95-178/A1:2002 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.
  • NF C46-520:1993 Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.
  • NF EN ISO 10524-3:2019 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 3 : détendeurs intégrés dans les robinets des bouteilles de gaz (VIPR)
  • NF S95-159-3:2006 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.
  • NF S95-159-3*NF EN ISO 10524-3:2019 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves (VIPRs)
  • NF C46-531*NF EN 60534-6-2:2001 Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators
  • NF E29-411:1988 Industrial valves. Safety and relief valves. General design, test, maintenance marking, conditioning.
  • NF ISO 10770-3:2020 Transmissions hydrauliques - Distributeurs hydrauliques à modulation électrique - Partie 3 : méthodes d'essai pour distributeurs de commande de pression
  • NF EN ISO 22435:2007 Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et essais de type
  • NF ISO 10770-2:2013 Transmissions hydrauliques - Distributeurs hydrauliques à modulation électrique - Partie 2 : méthodes d'essai pour distributeurs de commande de débit à trois voies
  • NF ISO 10770-1:2009 Transmissions hydrauliques - Distributeurs hydrauliques à modulation électrique - Partie 1 : méthodes d'essai pour distributeurs de commande de débit à quatre voies
  • NF EN 478:2018 Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Caractérisation de l'aspect après conditionnement à 150 oC
  • NF C46-510:2001 Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves.
  • NF E29-699*NF EN ISO 22435:2007 Gas cylinders - Cylinder valves with integrated pressure regulators - Specifications and type testing
  • NF M88-765:1975 FIXED ADJUSTMENT,LOW PRESSURE,REDUCING VALVE FOR COMMERCIAL BUTANE FOR DOMESTIC USE CONSTRUCTION,OPERATION,TESTS.
  • NF ISO 11933-4:2001 Composants pour enceintes de confinement - Partie 4 : systèmes de ventilation et d'épuration tels que filtres, pièges, vannes de régulation et sécurité, organes de contrôle et de protection
  • NF C46-506:1990 Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.
  • NF E29-453:1976 FLANGED STEEL REGULATING VALVES FOR INDUSTRIAL USE. NOMINAL PRESSURE PN 10 TO 100. SERIES PE 150,300 AND 600.
  • NF E29-425:1987 Industrial valves. Bursting discs devices. Definitions. General design. Test. Classification. Marking. Conditioning.
  • NF EN ISO 22435/A1:2013 Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et essais de type - Amendement 1
  • NF EN 1074-5:2001 Robinetterie pour l'alimentation en eau - Prescriptions d'aptitude à l'emploi et vérifications s'y rapportant - Partie 5 : robinets de régulation
  • NF ISO 6953-3:2012 Transmissions pneumatiques - Régulateurs de pression et filtre-régulateurs pour air comprimé - Partie 3 : méthodes d'essai alternatives pour mesurer les caractéristiques de débit des réducteurs de pression
  • NF EN 2743:2002 Série aérospatiale - Plastiques renforcés de fibres - Procédures normalisées pour le conditionnement avant essais sur matériaux non vieillis
  • NF C46-522:1994 Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.
  • NF E29-699/A1*NF EN ISO 22435/A1:2013 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing - Amendment 1
  • NF C58-560-2*NF EN 61056-2:2013 General purpose lead-acid batteries (valve-regulated types) - Part 2 : dimensions, terminals and marking
  • NF C58-432:1996 Stationary lead-acid batteries. General requirements and methods of test. Part 2 : valve regulated types.
  • NF EN 60534-2-4:2009 Vannes de régulation des processus industriels - Partie 2-4 : capacité d'écoulement - Caractéristiques intrinsèques de débit et coefficient intrinsèque de réglage

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, before and after regulating valve

Professional Standard - Machinery, before and after regulating valve

Group Standards of the People's Republic of China, before and after regulating valve

U.S. Air Force, before and after regulating valve

American National Standards Institute （ANSI), before and after regulating valve

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), before and after regulating valve

Underwriters Laboratories (UL), before and after regulating valve

  • UL 144-1999 UL Standard for Safety LP-Gas Regulators Seventh Edition; Reprint with Revisions Through and Including January 18,2002
  • UL 17-1994 Vent or chimney connector dampers for oil-fired appliances
  • UL 144-1994 UL Standard for Safety Pressure Regulating Valves for LP-Gas (Sixth Edition)

Korean Agency for Technology and Standards (KATS), before and after regulating valve

  • KS B 8010-2010 Oil controler for oil burning appliances
  • KS R 2056-2002 Expansion valves for automobile air conditioners
  • KS R 2056-2013 Expansion valves for automobile air conditioners
  • KS R 9207-2006 Leveling valves for railway rolling stock
  • KS C 8519-1999(2019) Small­sized sealed lead­acid batteries(valve regulated types)
  • KS R ISO 8218:2004 Road vehicles-Levelling devices for headlamp dipped beam
  • KS R ISO 8218:2013 Road vehicles－Levelling devices for headlamp dipped beam
  • KS B 1564-2007 Face－to－face dimensions for flanged control valves
  • KS B 6968-2008 Reliability test method for the vacuum valves－Part 3：Pressure control valves
  • KS B ISO 10522-2002(2022) Agricultural irrigation equipment－Direct-acting pressure-regulating valves
  • KS I 4033-2018 Test methods of remanufactured main control valve for construction equipments
  • KS B 6510-1991 Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
  • KS B 6343-2001 Pressure compensating type flow controlvalves for oil-hydraulic use
  • KS C IEC PAS 62182:2003 Preconditioning of nonhermetic surface mount devices prior to reliability testing
  • KS B 6511-1991 Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
  • KS I ISO 5135:2004 Acoustics-Determination of sound power levels of noise fromair-terminal devices, air-terminal units, dampers and valves bymeasurement in a reverberation room
  • KS I ISO 5135:2014 Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room

Professional Standard - Electricity, before and after regulating valve

Professional Standard - Construction Industry, before and after regulating valve

RU-GOST R, before and after regulating valve

  • GOST 25923-1989 Butterfly control valves. Basic parameters
  • GOST 16587-1971 Safety valves, control valves and pressure regulators. Face-to-face lengths
  • GOST 23866-1987 Single-seated, double-seated and cage control valves. Basic parameters
  • GOST R IEC 60896-22-2015 Stationary lead-acid batteries. Part 22. Valve regulated types. Requirements
  • GOST R 53045-2008 Food additives. Food acids and acidity regulators. Terms and definitions
  • GOST R IEC 60896-21-2013 Stationary lead-acid batteries. Part 21. Valve regulated types. Methods of test
  • GOST R 56006-2014 Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements
  • GOST R IEC 61056-2-2012 General purpose lead-acid batteries (valve-regulated types). Part 2. Dimensions, terminals and marking
  • GOST 30481-1997 Hydraulic fluid power. Four- and five-port servovalves. Mounting dimensions of subplates joint surfaces

Society of Automotive Engineers (SAE), before and after regulating valve

  • SAE J879-1963 PASSENGER CAR FRONT SEAT AND SEAT ADJUSTER
  • SAE J879A-1968 PASSENGER CAR FRONT SEAT AND SEAT ADJUSTER
  • SAE AS85049/82-2000 Connector accessories, electrical, backshell, straight, self- locking, shield band termination (RFI/EMI), shrink sleeve accommodation, category 3B (for MIL-C-5015 crimp, MIL-C-26482 series 2 MIL-C-81703 series 3 and MIL-C-83723 series III connectors)

CZ-CSN, before and after regulating valve

Professional Standard - Urban Construction, before and after regulating valve

U.S. Military Regulations and Norms, before and after regulating valve

Standard Association of Australia （SAA）, before and after regulating valve

  • AS 5081:2008 Hydraulically operated automatic control valves for waterworks purposes
  • AS/NZS 4029.2:2000 Stationary batteries - Lead-acid - Valve-regulated type
  • AS 4267:1995 Pressure regulators for use with industrial compressed gas cylinders
  • AS 2402.2.1:2005 Traction batteries - Lead-acid - Valve-regulated cells - Requirements
  • AS 1682.1:2015 Fire, smoke and air dampers, Part 1: Specification
  • AS 1682.2:2015 Fire, smoke and air dampers, Part 2: Installation
  • AS 2402.2.2:2005 Traction batteries - Lead-acid - Valve-regulated cells - Installation and usage
  • AS 4267:1995/AMD 1:1995 Amendment No.1 to AS 4267-1995 Pressure regulators for use with industrial compressed gas cyllinders
  • AS 4267:1995/AMD 2:1998 Amendment No. 2 to AS 4267—1995 Pressure regulators for use with industrial compressed gas cylinders
  • AS 4032.3:2004 Water supply - Valves for the control of hot water supply temperatures - Requirements for field testing, maintenance or replacment of thermostatic mixing valves, tempering valves and end of line temperature control devices

IT-UNI, before and after regulating valve

HU-MSZT, before and after regulating valve

Guangdong Provincial Standard of the People's Republic of China, before and after regulating valve

JP-JARI, before and after regulating valve

  • JRIS R1612-2021 Rolling stock - Three-pressure type control valves
  • JRIS E 4117-2-2005 Rolling stock-levelling valves Part2: with throttled air flow around neutral position

Defense Logistics Agency, before and after regulating valve

International Telecommunication Union (ITU), before and after regulating valve

  • ITU-T N.12 FRENCH-1988 MEASUREMENTS TO BE MADE DURING THE LINE - UP PERIOD THAT PRECEDES A SOUND - PROGRAMME TRANSMISSION
  • ITU-T N.12 SPANISH-1988 MEASUREMENTS TO BE MADE DURING THE LINE - UP PERIOD THAT PRECEDES A SOUND - PROGRAMME TRANSMISSION

British Standards Institution (BSI), before and after regulating valve

  • BS EN ISO 10524-3+A1:2008 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
  • BS EN ISO 10524-3:2008 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
  • BS EN ISO 10524-3:2006+A1:2013 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
  • BS EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
  • BS EN 738-3:1999 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
  • BS ISO 14617-8:2004 Graphical symbols for diagrams - Valves and dampers
  • BS ISO 10522:2021 Agricultural irrigation equipment. Direct-acting pressure-regulating valves
  • BS EN 60896-22:2005 Stationary lead-acid batteries - Valve regulated types - Requirements
  • BS EN 60896-22:2004 Stationary lead-acid batteries - Valve regulated types - Requirements
  • BS EN ISO 10524-3:2019 Tracked Changes. Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves (VIPRs)
  • BS ISO 10770-3:2007 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
  • BS ISO 10770-3:2020 Tracked Changes. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
  • BS EN 60896-21:2005 Stationary lead-acid batteries - Valve regulated types - Methods of test
  • BS EN 60896-21:2004 Stationary lead-acid batteries - Valve regulated types - Methods of test
  • BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-port directional flow-control valves
  • BS 6290-4:1997 Lead-acid stationary cells and batteries - Specification for classifying valve regulated types
  • BS EN ISO 22435:2007+A1:2012 Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
  • BS EN 61056-2:2013 General purpose lead-acid batteries (valve-regulated types). Dimensions, terminals and marking
  • BS EN 61056-2:2012 General purpose lead-acid batteries (valve-regulated types). Dimensions, terminals and marking
  • BS ISO 10294-4:2001 Fire-resistance tests - Fire dampers for air distribution systems - Test of thermal release mechanism
  • BS EN 61056-2:2003 Portable lead-acid cells and batteries (valve-regulated types) - Dimensions, terminals and marking
  • 19/30372061 DC BS ISO 10770-3. Hydraulic fluid power. Electrically modulated hydraulic control valves. Part 3. Test methods for pressure control valves
  • BS 7350:1990 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
  • 23/30424799 DC BS EN ISO 22435. Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
  • BS EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
  • BS EN 61056-1:2003 Portable lead-acid cells and batteries (valve-regulated types) - General requirements, functional characteristics - Methods of test
  • BS ISO 7967-3:2010 Reciprocating internal combustion engines. Vocabulary of components and systems. Valves, camshaft drives and actuating mechanisms

Japanese Industrial Standards Committee (JISC), before and after regulating valve

  • JIS B 8357:1994 Pressure compensating type flow control valves for oil-hydraulic use
  • JIS C 8707:1992 Stationary sealed lead-acid batteries (valve regulated type)
  • JIS C 8704-2-2:2006 Stationary lead-acid batteries -- Part 2-2: Valve regulated types -- Requirements
  • JIS C 8704-2-2:2019 Stationary lead-acid batteries -- Part 2-2 : Valve regulated types -- Requirements
  • JIS Z 8617-8:2008 Graphical symbols for diagrams -- Part 8: Valves and dampers
  • JIS C 8704-2-1:2006 Stationary lead-acid batteries -- Part 2-1: Valve regulated types -- Methods of test
  • JIS C 8704-2-1:2019 Stationary lead-acid batteries -- Part 2-1: Valve regulated types -- Methods of test
  • JIS C 8702-2:2003 Small-sized valve regulated lead-acid batteries -- Part 2: Dimensions, terminals and marking
  • JIS B 8659-1:2013 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-port directional flow-control valves
  • JIS B 8659-1:2000 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves
  • JIS C 8702-2:2009 Small-sized valve regulated lead-acid batteries -- Part 2: Dimensions, terminals and marking
  • JIS C 8702-3:2003 Small-sized valve regulated lead-acid batteries -- Part 3: Safety recommendations for use in electric appliances
  • JIS C 8702-3:2009 Small-sized valve regulated lead-acid batteries -- Part 3: Safety recommendations for use in electric appliances
  • JIS B 8659-2:2002 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
  • JIS C 8704-2:1999 Stationary lead-acid batteries -- General requirements and methods of tests -- Part 2: Valve regulated types
  • JIS B 8659-2:2017 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-port directional flow-control valves

Professional Standard - Energy, before and after regulating valve

  • DL/T 5593-2021 Regulations for Type Selection and Design of Regulating Valves in Power Plants
  • NB/T 20078-2012 Qualification procedure for safety-related pneumatic control valve of pressurized water reactor nuclear power plants

Professional Standard - Nuclear Industry, before and after regulating valve

  • EJ/T 20127-2016 Specification for special electric control valves for centrifuge cascade process
  • EJ/T 479-1989 Selection and Design Regulations for Control Valves of 300MW Pressurized Water Reactor Nuclear Power Plant

Professional Standard - Chemical Industry, before and after regulating valve

  • HG/T 3237-2006 Self-operated pressure regulators for rubber machinery
  • HG/T 3237-1989 Self-operated pressure regulating valve for rubber machinery

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), before and after regulating valve

CEN - European Committee for Standardization, before and after regulating valve

  • EN ISO 10524-3:2019 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs)

JP-JEM, before and after regulating valve

  • JEM 1446-2008 Inspection of motor operated valve actuators used for nuclear power plant valves

VN-TCVN, before and after regulating valve

  • TCVN 7741-3-2007 Pressure regulators for use with medical gases.Part 3: Pressure regulators integrated with cylinder valves

International Organization for Standardization (ISO), before and after regulating valve

  • ISO 8218:1989 Road vehicles; levelling devices for headlamp dipped beam
  • ISO 10524-3:2005 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
  • ISO 10524-3:2019 Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves (VIPRs)
  • ISO 10294-5:2005 Fire resistance tests - Fire dampers for air distribution systems - Part 5: Intumescent fire dampers
  • ISO 14617-8:2002 Graphical symbols for diagrams - Part 8: Valves and dampers
  • ISO 10770-3:2007 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
  • ISO 10770-3:2020 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
  • ISO 22435:2007 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing
  • ISO/FDIS 22435:2023 Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
  • ISO 10294-1:1996 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
  • ISO 22435:2007/Amd 1:2012 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing; Amendment 1
  • ISO 10294-3:1999 Fire resistance tests - Fire dampers for air distribution systems - Part 3: Guidance on the test method
  • ISO 10294-4:2001 Fire resistance tests - Fire dampers for air distribution systems - Part 4: Test of thermal release mechanism

GM Europe, before and after regulating valve

  • GME 8270-2007 Front Seat Adjuster - Transverse Alternating Load Fatigue Test

Military Standard of the People's Republic of China-General Armament Department, before and after regulating valve

  • GJB 7969-2012 Self-operated pressure fuel oil regulator specification for ship

BR-ABNT, before and after regulating valve

German Institute for Standardization, before and after regulating valve

  • DIN 21635:2016 Air regulation systems in mining - Air locks - Building and operation
  • DIN 21635:1998 Air regulation systems in mining - Air locks - Building and operation
  • DIN EN ISO 10524-3:2019-08 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019); German version EN ISO 10524-3:2019
  • DIN 35861:2022-06 Regulated circulation valves in the drinking water installation - Requirements and tests / Note: This standard is part of the DVGW body of rules.
  • DIN 35861:2022 Regulated circulation valves in the drinking water installation - Requirements and tests
  • DIN EN ISO 10524-3:2019 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
  • DIN 3394-1:2004 Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar
  • DIN EN 60896-22:2004 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements (IEC 60896-22:2004); German version EN 60896-22:2004
  • DIN EN 215:2007 Thermostatic radiator valves - Requirements and test methods(includes Amendment A1:2006); English version of DIN EN 215:2007-11
  • DIN EN 60896-21 Berichtigung 1:2007 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test (IEC 60896-21:2004); German version EN 60896-21:2004, Corrigenda to DIN EN 60896-21:2004-12
  • DIN EN 60896-21:2004 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test (IEC 60896-21:2004); German version EN 60896-21:2004
  • DIN EN ISO 22435:2013-03 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007 + Amd.1:2012); German version EN ISO 22435:2007 + A1:2012
  • DIN 21639:2016 Air regulation systems for mining - Travel-way air locks with pressure-relief air doors
  • DIN EN ISO 22435:2007 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007); English version of DIN EN ISO 22435:2007-12
  • DIN EN ISO 5135:2020 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020); German version EN ISO 5135:2020
  • DIN 21636:2003 Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
  • DIN 21636:2016 Air regulation systems for mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
  • DIN EN 2743:2003-06 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
  • DIN 32730:1993 Valves with a safety function for water and steam in heating systems; safety requirements and testing
  • DIN EN ISO 22435:2023-04 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO/DIS 22435:2023); German and English version prEN ISO 22435:2023 / Note: Date of issue 2023-02-24*Intended as replacement for DIN EN ISO 22435 (201...
  • DIN EN ISO 10524-3:2013 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005 + Amd 1:2013); German version EN ISO 10524-3:2006 + A1:2013

GOSTR, before and after regulating valve

  • GOST R 55023-2012 Pipeline valves. Home regulators of pressure. General specifications

Danish Standards Foundation, before and after regulating valve

  • DS/EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
  • DS/EN ISO 22435:2008 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing
  • DS/EN ISO 22435/A1:2013 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing
  • DS/EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
  • DS/EN ISO 10524-3/A1:2013 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer

未注明发布机构, before and after regulating valve

  • BS EN 738-3:1999(2002) Pressure regulators for use with medical gases — Part 3 : Pressure regulators integrated with cylinder valves
  • BS 7350:1990(1999) Specification for Double regulating globe valves and flow measurement devices for heating and chilled water systems

Taiwan Provincial Standard of the People's Republic of China, before and after regulating valve

ES-UNE, before and after regulating valve

  • UNE-EN ISO 10524-3:2019 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
  • ISO/DIS 22435:2023 Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
  • UNE-EN 2743:2001 Aerospace series- Fibre reinforced plastics- Standard procedures for conditioning prior to testing unaged materials. (Endorsed by AENOR in February of 2002.)

FI-SFS, before and after regulating valve

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), before and after regulating valve

  • ASHRAE 17-2008 Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves

Guizhou Provincial Standard of the People's Republic of China, before and after regulating valve

  • DB52/T 1248-2017 Test specification for flow characteristics of steam turbine high pressure regulating steam valve

PT-IPQ, before and after regulating valve

  • NP EN 738-3-2000 Pressure regulators for use with medical gases Part 3:Pressure regulators integrated with cylinder valves

European Committee for Standardization (CEN), before and after regulating valve

  • EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005)
  • EN 1111:1998 Sanitary Tapware - Thermostatic Mixing Valves (PN-10) - General Technical Specification
  • EN 1111:2017 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
  • EN 738-3:1998 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves Includes amendment A1: 2002
  • EN ISO 22435:2007 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007)
  • prEN 50105-1992 Stationary lead-acid batteries; general requirements and test methods; valve regulated types
  • EN ISO 5135:2020 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020)
  • prEN ISO 22435 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO/DIS 22435:2023)
  • EN ISO 5135:1998 Acoustics - Determination of sound power levels of noise fromair-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
  • EN 1111:2017/prA1:2021 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
  • EN ISO 22435:2007/A1:2012 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012)

Canadian Standards Association (CSA), before and after regulating valve

  • CAN/CSA-Z10524-3-2012 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (First Edition)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, before and after regulating valve

Lithuanian Standards Office , before and after regulating valve

  • LST EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005)
  • LST EN 2743-2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
  • LST EN ISO 22435:2007 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007)

AENOR, before and after regulating valve

  • UNE-EN ISO 10524-3:2007 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005)
  • UNE-EN ISO 22435:2009 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007)
  • UNE 60402-2:2008/2M:2013 Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve an
  • UNE 60402-2:2008/1M:2012 Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve an
  • UNE 60402-2:2008 Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an oulet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve and
  • UNE-EN ISO 22435:2009/A1:2013 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012)

Professional Standard - Light Industry, before and after regulating valve

  • QB/T 4837-2015 Technical requirements and test methods of throttle valve of room air-conditioner

US-CFR-file, before and after regulating valve

  • CFR 10-1708.105-2014 Energy. Part1708:Procedures for safety investigations. Section1708.105:Promise of confidentiality.
  • CFR 29-101.19-2014 Labor. Part101:Statements of procedures. Section101.19:Consent adjustments before formal hearing.
  • CFR 10-1708.112-2014 Energy. Part1708:Procedures for safety investigations. Section1708.112:Appearance and practice before the Board.

YU-JUS, before and after regulating valve

  • JUS M.E3.473-1990 Self adiusting valves. Regulating dovice with or without shutting-off (zero-shutt-off) class R and R . Safetv reguirements and testings

Institute of Electrical and Electronics Engineers (IEEE), before and after regulating valve

  • IEEE 1189-2007 Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
  • IEEE 1188-2005 Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
  • IEEE 1188A-2014 Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications

American Society of Mechanical Engineers (ASME), before and after regulating valve

European Committee for Electrotechnical Standardization（CENELEC）, before and after regulating valve

  • EN 60896-22:2004 Stationary lead-acid batteries Part 22: Valve regulated types - Requirements

RO-ASRO, before and after regulating valve

  • STAS 10135/5-1987 Hydrostatic drives PRESSURE-REGULATING VALVES PN 200 bar Classification and symbolization

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, before and after regulating valve

  • PREN 2743-1991 Aerospace Series Reinforced Plastics Standard Procedures for Conditioning Prior to Testing (Issue P 1)

BE-NBN, before and after regulating valve

International Electrotechnical Commission (IEC), before and after regulating valve

  • IEC 61056-2:2002 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
  • IEC 61056-2:2012/COR1:2012 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
  • IEC 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
  • IEC 60896-2:1995 Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., before and after regulating valve

  • ASHRAE LV-11-C031-2011 Measured Levels of Hospital Noise Before@ During@ and After Renovation of a Hospital Wing@ and a Survey of Resulting Patient Perception

  Stretch before and after aging, Control valve, Control valve front and rear valve, before and after valve adjustment, Regulating valve before and after, Control valve front and rear valve, before and after regulating valve, Before and after virus removal, Front and rear dimensions of the regulating valve, Requirements before and after the regulating valve, Before and after development, Requirements before and after the regulating valve, Before and after the regulating valve, before and after treatment, Pressure before and after regulating valve, front and rear focal length, before and after ras, Before and after test comparison, front and rear primers, before and after comparison.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved