ZH
RU
ES

Tensile

Tensile, Total:499 items.

In the international standard classification, Tensile involves: Protection of and in buildings, Plastics, Rubber and plastics products, Wood, sawlogs and sawn timber, Materials for aerospace construction, Testing of metals, Waxes, bituminous materials and other petroleum products, Fasteners for aerospace construction, Electrical wires and cables, Road vehicle systems, Leather technology, Analytical chemistry, Paper and board, Rubber, Fibre optic communications, Metalliferous minerals, Textile fibres, Iron and steel products, Construction materials, Products of the textile industry, Products of the chemical industry, Adhesives, Welding, brazing and soldering, Cellular materials, Surface treatment and coating, Conducting materials, Electrical and electronic testing, Wood technology processes, Insulating fluids, Ferrous metals, Inorganic chemicals, Electromechanical components for electronic and telecommunications equipment, Ceramics, Refractories, Seals, glands, Materials for the reinforcement of composites, Reinforced plastics, Continuous handling equipment, Fasteners, Wood-based panels, Electrical accessories, Mechanical testing, Earthworks. Excavations. Foundation construction. Underground works, Equipment for the chemical industry, Electronic components in general, Powder metallurgy, Paper products, Non-textile floor coverings, Sports equipment and facilities, Products of non-ferrous metals, Birth control. Mechanical contraceptives, Cutting tools, Structures of buildings, Textile machinery, Mining and quarrying, Chipless working equipment, Footwear, Processes of the textile industry, Pulps, Insulating materials, Springs, Jewellery.

Taiwan Provincial Standard of the People's Republic of China, Tensile

CNS 10416-2001 Stretchy asphalt roofing felts (Synthetic fiber base)
CNS 456-2005 Wood - Determination of tensile properties
CNS 1278-1981 Method of Test for Tensile Strength of Leather
CNS 4396-1992 Method of Test for Tensile Properties of Plastics
CNS 5605-1980 Method of Determination for Tensile Strength of Adhesives
CNS 5366-1980 Indirected Test Method for Tensile Strength of Rock
CNS 13038-1992 Method of Test for Wide Plate Tension of Butt Welded Joint
CNS 10924-1984 Method of Test for Fiber Optic Devices (Tensile Proof Test)
CNS 13300-1993 Method of Test for Tensile Properties of Geotixtiles by the Wide - Width Strip
CNS 13555-1995 Method of Test for Tensile Properties of Carbon Fiber Reinforced Plastics
CNS 1011-1983 Method of Test for Tensile Strength of Hydraulic Cement Mortar
CNS 13336-1994 Method of Test for Tensile Properties of Plastic Films and Sheets
CNS 12779-1990 Method of Test for Tensile Properties of Glass Fiber Reinforced Plastics
CNS 13957-1997 Method of test for tensile strength of fine ceramics at room and elevated temperature
CNS 9532-1982 Method of Test for Direct Tensile Strength of Intact Rock Core Specimens
CNS 13039-1992 Covered electrodes for low alloy high tensile strength steel
CNS 13483-1995 Method of Test for Breaking Load and Elongation of Geotextiles (Grab Method)
CNS 5141-1980 Method of Test for Tensile Strength and Elongation at Break of Ebonite

American National Standards Institute （ANSI), Tensile

ANSI/ASTM D1708:1997 Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ANSI/TIA-455-31C-1994 Proof Testing Optical Fibers by Tension
ANSI/TIA-455-31-C-1994 Proof Testing Optical Fibers by Tension
ANSI/TIA/EIA 455-89B-1998 Jacket Elongation and Tensile Strength for Fiber Optic Cable
ANSI/TIA-455-89B-1998 Jacket Elongation and Tensile Strength for Fiber Optic Cable
ANSI/ASTM E8:2013 TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
ANSI/ASTM C749:2013 Test Method for Tensile Stress-Strain of Carbon and Graphite
ANSI/TIA-455-28-C-1999 Method for Measuring Dynamic Tensile Strength of Optical Fibers
ANSI/EIA 364-08B:1998 Electric Connectors – Crimp Tensile Strength Test Procedure
ANSI/ASTM E1450:1992 Test Method for Tension Testing of Structural Alloys in Liquid Helium
ANSI/SAE J271-1994 Special Quality High Tensile, Hard Drawn Mechanical Spring Wire and Springs

PK-PSQCA, Tensile

PS 242-1963 Tensile testing of steel wire.
PS 241-1963 Tensile testing of steel.
PS 151-1961 Method for Determination of Tensile strength and elongation of single yarns.
PS 424-1964 LOAD CALIBRATION TESTING MACHINES FOR TENSILE TESTING OF STEEL

Group Standards of the People's Republic of China, Tensile

T/JSGD 15-2022 Anti-stretch strap
T/QGCML 2054-2023

FI-SFS, Tensile

SFS 5226-1986
SFS 3477-1975
SFS 3478-1975
SFS 3472-1975
SFS 3471-1975
SFS 3473-1975
SFS 3474-1975
SFS 3475-1975
SFS-ISO 1184:1987 In case of interpretation disputes the English text applies
SFS 3476-1975

Professional Standard - Aviation, Tensile

HB 7184-1995 Tensile Type High Lock Nut
HB 5510-1983 High tensile strength type ring grooved rivet collar
HB 7186-1995 Tensile type flat head high lock bolt
HB 5505-1980 90° countersunk head pull ring groove rivets
HB 5511-1980 Tensile ring groove rivet set
HB 5510-1980 Tensile ring groove rivet set
HB 5506-1983 Flat round head high tensile ring grooved rivet
HB 5505-1983 90° countersunk head high tensile strength ring-grooved river
HB 5511-1983 High tensile strength type ring grooved rivet collar
HB 5506-1980 Flat round head pull ring groove rivets
HB 7185-1995 Tensile Type 100° Countersunk Head High Lock Bolts
HB 5475-1991 Test method for tensile strength of thermal sprayed coatings
HB 6847-1993 Pull riveting flat round head tensile titanium alloy ring groove rivets
HB 6849-1993 Blind riveting type 100° countersunk head tensile titanium alloy ring groove rivets
HB 8375-2013 Titanium alloy light tensile high lock bolt with flat head
HB 6853-1993 Bolts with a minimum tensile strength of 1470MPa use preloaded washers
HB 6852-1993 Bolts with a minimum tensile strength of 1075 MPa use preloaded washers
HB 6848-1993 Upset riveting flat round head tensile titanium alloy ring groove rivets
HB 6850-1993 Upset riveting type 100° countersunk head tensile titanium alloy ring groove rivets
HB 8373-2013 Titanium alloy light tensile type 100° countersunk head high lock bolt
HB 8374-2013 Stainless steel light tensile type sealed MJ thread high lock nut
HB 8376-2013 Stainless steel light tensile type spherical MJ thread high lock nut

American Society for Testing and Materials (ASTM), Tensile

ASTM D1708-02 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D1708-13 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM E345-93(2002) Standard Test Methods of Tension Testing of Metallic Foil
ASTM D2370-98 Standard Test Method for Tensile Properties of Organic Coatings
ASTM D2370-98(2002) Standard Test Method for Tensile Properties of Organic Coatings
ASTM A70-44 Specification for Low and Intermediate Tensile Strength Carbon-Steel
ASTM A679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM A679/A679M-17 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM E21-92(1998)e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-92(1998) Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM D2209-00(2004) Standard Test Method for Tensile Strength of Leather
ASTM D2209-00 Standard Test Method for Tensile Strength of Leather
ASTM D638-03 Standard Test Method for Tensile Properties of Plastics
ASTM E345-93(2008) Standard Test Methods of Tension Testing of Metallic Foil
ASTM E8/E8M-09 Standard Test Methods for Tension Testing of Metallic Materials
ASTM D2209-00(2010) Standard Test Method for Tensile Strength of Leather
ASTM A679/A679M-06(2012) Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM F152-95(2002) Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
ASTM F152-95 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
ASTM D3500-90(2009) Standard Test Methods for Structural Panels in Tension
ASTM D3500-14 Standard Test Methods for Structural Panels in Tension
ASTM C749-92(1996) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-92(2002) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D2370-98(2010) Standard Test Method for Tensile Properties of Organic Coatings
ASTM D2370-98(2002)e1 Standard Test Method for Tensile Properties of Organic Coatings
ASTM C749-08 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-08(2010)e1 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D2370-16 Standard Test Method for Tensile Properties of Organic Coatings
ASTM C749-13 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D882-02 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D882-01 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D882-00 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM A283/A283M-03(2007) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM D882-10 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM F152-95(2009) Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
ASTM D882-12 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D8480-23 Standard Test Method for Determining the Tensile Strength of GCCM Materials
ASTM D7269-06 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM D6644-01(2007) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM E21-03 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-03a Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-05 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM D6644-01(2002) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM D897-01 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-00 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-01e1 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-08 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM A283/A283M-12 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM A78-43 Specification for Low Tensile Strength Carbon-Steel Plates of Structured Quality for Welding
ASTM D6644-01(2013) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM D1822-21 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics
ASTM A770/A770M-03(2007) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM D7267-19 Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
ASTM D7267-19a Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
ASTM E1450-92(1998)e1 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E1450-03 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM D6768-04 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
ASTM D2256/D2256M-09 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D6768-04(2009) Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
ASTM D7269/D7269M-10 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM A307-97 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth

YU-JUS, Tensile

JUS C.K6.034-1982 Prestressing steels. Tensile test
JUS G.S2.612-1982 Plastics. Determination of tensile properties
JUS D.A8.066-1985 Testing of plywood. Determination of tensile strength
JUS G.E2.310-1983 Steel cord conveyor belts. Measurement of tensile strength
JUS C.T3.056-1991 Fusion welded butt joints in steel. Transverse tensile test
JUS C.N2.007-1990 Sintered metal materinis (excludlng hardmetal). Tenslle test pleces
JUS H.N8.214-1987 Testing ofpaper andboard. Determination oftensile properties. Constant rate ofloading method

CH-SNV, Tensile

Korean Agency for Technology and Standards (KATS), Tensile

KS F 2207-1994 Method of Tension Test for Wood
KS E 3032-2006 Method of test for tensile strength of rock
KS E 3032-2021 Method of test for tensile strength of rock
KS E 3032-2006(2016) METHOD OF TEST FOR TENSILE STRENGTH OF ROCK
KS E 3032-1977 Method of test for tensile strength of rock
KS F 2124-1999
KS D 3781-2016(2021) High tensile strength steel for tower structural purposes
KS L 5104-2012 Testing method for tensile strength of hydraulic cement mortars
KS L 5104-1986 Testing method for tensile strength of hydraulic cement mortars
KS M ISO 6922:2012 Adhesives-Determination of tensile strength of butt joints
KS D ISO 19819:2005 Metallic materials-Tensile testing in liquid helium
KS F 2423-2016 Method of test for splitting tensile strength of concrete
KS M ISO 15754:2022 Paper and board — Determination of z-directional tensile strength
KS K 0763-2015(2022) Test method for geogrid rib tensile strength
KS M ISO 15754:2016 Paper and board－Determination of z-directional tensile strength
KS K 0763-2015(2017) Test method for geogrid rib tensile strength
KS B ISO TR 10108-2003(2018)
KS L 5104-2017 Testing method for tensile strength of hydraulic cement mortars
KS M ISO 6922:2008 Adhesives－Determination of tensile strength of butt joints
KS K 0517-2016 Full thickness tensile strength and elongation for conveyor belts
KS L 5104-2022 Test method for tensile strength of hydraulic cement mortars
KS F 2423-2021 Standard test method for tensile splitting strength of concrete
KS M ISO 527-1:2012 Plastics－Determination of tensile properties－Part 1：General principles
KS M ISO 17706:2004 Footwear－Test methods for uppers－Tensile strength and elongation
KS B ISO 4136:2008 Destructive tests on welds in metallic materials－Transverse tensile test
KS M ISO 22654:2008 Footwear－Test methods for outsoles－Tensile strength and elongation
KS F 2480-2014 Method of test for splitting tensile strength of polyester resin concrete
KS W 1705-2002(2018) Aerospace－Tensile strength 897MPa(130ksi) steel bolts and screws

Japanese Industrial Standards Committee (JISC), Tensile

JIS Z 2112:1977 Method of tension test for wood
JIS H 7601-2:2002 Method of tensile test for intermetallic compounds -- Part 2: Elevated temperature tensile test
JIS H 7601-1:2002 Method of tensile test for intermetallic compounds -- Part 1: Room temperature tensile test
JIS C 3405:1998 Road vehicles -- High tension cables
JIS L 1069:1995 Tensile strength tests of natural fibres
JIS K 6251:1993 Tensile testing methods for vulcanized rubber
JIS Z 2201:1980 Test pieces for tensile test for metallic materials
JIS Z 3121:1993 Methods of tensile test for butt welded joints
JIS Z 2201:1998 Test pieces for tensile test for metallic materials
JIS Z 3121:2013 Methods of tensile test for butt welded joints
JIS Z 3192:1999 Methods of tensile and shear tests for brazed joint
JIS L 1069:2002 Tensile strength tests of natural fibres
JIS A 1113:2018 Method of test for splitting tensile strength of concrete
JIS Z 3127:1977 Method of wide plate tension test for butt welded joint
JIS C 5402-17-3:2018 Connectors for electronic equipment -- Tests and measurements -- Part 17-3: Cable clamping tests -- Test 17c: Cable clamp resistance to cable pull (tensile)
JIS L 1069 AMD 1:2008 Tensile strength tests of natural fibres (Amendment 1)
JIS R 1630:1997 Test methods for tensile strength of fine ceramic joint
JIS K 7054:1995 Testing method for tensile properties of glass fiber reinforced plastics
JIS K 6849:1994 Testing methods for tensile strength of adhesive bonds
JIS H 7501:2002 Method for evaluation of tensile properties of metallic superplastic materials
JIS H 7501:2016 Method for evaluation of tensile properties of metallic superplastic materials
JIS G 5111:1991 High tensile strength carbon steel castings and low alloy steel castings for structural purposes
JIS G 3223 AMD 1:2008 High tensile strength steel forgings for tower flanges (Amendment 1)

Society of Automotive Engineers (SAE), Tensile

SAE AMS3892/12-1992 Tow, Carbon Fiber for Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
SAE AMS3892/11A-1992 Tow, Carbon Fiber for Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/10A-1992 Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
SAE AMS3892/9B-1992 Tow, Carbon Fiber for Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/6A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
SAE AMS3892/5B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/4B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile ModuluS
SAE AMS3892/2B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus
SAE AMS3892/1B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3892/7A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/3B-1992 Tow or Yarn, Carbon Fibers for Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3345E-1992 Silicone Rubber 1000 psi (6.90 MPa) Tensile Strength 45 - 55
SAE AMS6315C-1946 Steel 1.8ni .25mo (0.38 - 0.43c) Heat Treated (105,000 Tensile Strength)
SAE AMS2310F-2006 Qualification Sampling and Testing of Steels for Transverse Tensile Properties
SAE AMS5315B-1981 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (414 MPa) Tensile Strength
SAE AMS5316D-2013 Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast
SAE AMS3349C-1993 Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75
SAE AMS3348C-1994 Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35
SAE AMS5316C-2011 DUCTILE (NODULAR) IRON CASTINGS, SAND 80,000 psi (550 MPa) Tensile Strength As Cast
SAE AMS5316B-1982 DUCTILE (NODULAR) IRON CASTINGS, SAND 80,000 psi (550 MPa) Tensile Strength As Cast
SAE AMS6367-2002 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 - .39 Carbon) (150,000 Tensile Strength)
SAE AMS6368-2002 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 - .39 Carbon) (200,000 Tensile Strength)
SAE AMS6366-2002 Steel Tubing, (Seamless), Round Chromium Molybdenum (.32 - .39 Carbon) (125,000 Tensile Strength)
SAE AMS3348D-2014 Silicone (VMQ) Rubber 1150 Psi (7.93 MPa) Tensile Strength, High Resiliency 25-35
SAE AMS3349D-2014 Silicone (VMQ) Rubber, 1100 psi (7.58 MPa) Tensile Strength, High Resiliency, 65 - 75
SAE TS24-7-2019 TS24 Manufacturing Specification for Bolts 1275 MPa (185,000 lbf/in²) Tensile Strength at Room Temperature 1000 MPa (145,000 lbf/in²) Tensile Strength at 650°C
SAE AMS5637D-1981 STEEL BARS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Drawn, 125,000 psi (860 MPa) Tensile Strength
SAE AMS5637C-1979 STEEL BARS, CORROSION RESISTANT 18Cr - 8.5Ni (SAE 30302) Cold Drawn, 125,000 psi (862 MPa) Tensile Strength
SAE AMS5636C-1981 STEEL BARS CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Drawn, 100,000 psi (690 MPa) Tensile Strength
SAE AMS3349C-2007 Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75

BR-ABNT, Tensile

ABNT P-MB-388-1966
ABNT NBR 16912-2020 Texture - Determination of adhesion tensile strength
ABNT MB-375-1969

RO-ASRO, Tensile

STAS 10077-1975 EBONITE Determination of tensile strength
STAS 6834-1975 Tests of metals TENSILE TEST AT LOW TEMPERATURES
STAS 8915-1978 CONVEYOR BELTS Determination of full thickness tensile strcngh and elongation
STAS 10897/1-1983 Tests of metals MECHANICAL TESTING OF BRAZED JOINTS Tensile testing

Association Francaise de Normalisation, Tensile

NF T60-127:1974 Tensile strength of paraffin wax.
NF T66-038:2010 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method.
NF T46-021:2011 Rubber, vulcanized - Determination of tension fatigue.
NF X41-021:1996 Self adhesive tapes. Measurement of breaking strength.
NF T46-002:2005 Vulcanized or thermoplastic rubber. Tensile test.
NF G07-217*NF EN 13895:2003 Textiles - Monofilaments - Determination of tensile properties
NF T46-002:1988 Vulcanized or thermoplastic rubber. Tensile test.
NF A91-211:1994 Thermal spraying. Determination of tensile adhesive strength.
NF T47-156*NF EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
NF T76-123:1993 Adhesives. Determination of tensile strength of butt joints.
NF T25-102*NF ISO 11566:1997 Carbon fibre. Determination of the tensile properties of single-filament specimens.
NF G52-007:1976 Determination of extension and tensile strength of the surface of a leather.
NF P90-134*NF EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
NF T51-122:1988 Plastics. Determination of tensile properties by use of small specimens.
NF Q03-004:1986 Paper and board. Determination of tensile properties. Constant rate of loading method.
NF P75-211:1997 Thermal insulating products for building applications. Determination of tensile strength perpendicular to faces.
NF P75-212:1997 Thermal insulating products for building applications. Determination of tensile strength parallel to faces.
NF P21-378*NF EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
NF P94-422:2001 Roches - Détermination de la résistance à la traction - Méthode indirecte - Essai brésilien
NF T46-200:1988 Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Description.
NF G62-615*NF EN ISO 10765:2010 Footwear - Test method for the characterization of elastic materials - Tensile performance.
NF T70-315:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. TENSILE PROPERTIES.
NF A51-110*NF EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test.
NF P75-212*NF EN 1608:2013 Thermal insulating products for building applications - Determination of tensile strength parallel to faces

Military Standard of the People's Republic of China-General Armament Department, Tensile

GJB 381.10-1987 Tensile ring groove rivet set
GJB 381.11-1987 Tensile ring groove rivet set
GJB 381.5-1987 100° countersunk head tensile ring groove rivets
GJB 381.6-1987 Flat round head tensile ring groove rivets
GJB 715.30-1990 Fastener Test Methods Tensile Fatigue
GJB 856-1990 Specification for tensile titanium alloy ring groove rivets
GJB 857.2-1990 Flat head tensile titanium alloy ring groove rivets
GJB 857.3-1990 Tensile titanium alloy ring groove rivet set
GJB 857.1-1990 100° countersunk head tensile titanium alloy ring groove rivets

Professional Standard - Aerospace, Tensile

QJ 534-1985 Rivet type anti-pull ring groove rivet set
QJ 1726-1989 Upset riveting pull ring groove rivet set
QJ 528-1985 Specifications for pull-rivet type pull-ring groove rivets
QJ 535-1985 Pull rivet type anti-pull ring groove rivet adjusting gasket
QJ 530-1985 Pull rivet type anti-pull flat round head ring groove rivet shank
QJ 532-1985 Pull riveting type tensile 90° countersunk head ring groove rivet shank
QJ 1723-1989 Specifications for Upset Riveting Tension Ring Groove Rivets
QJ 1724-1989 Upset riveting type flat cone head tension ring groove rivet shank
QJ 1725-1989 Upset riveting type 100° countersunk head pull ring groove rivet shank
QJ 531-1985 Pull riveting type tensile sealing flat round head ring groove rivet shank
QJ 533-1985 Rivet Type Tensile Seal 90° Countersunk Head Ring Groove Rivet Shank

International Organization for Standardization (ISO), Tensile

ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
ISO 6943:2007 Rubber, vulcanized - Determination of tension fatigue
ISO 15579:2000 Metallic materials - Tensile testing at low temperature
ISO 1924:1976 Paper and board — Determination of tensile strength
ISO 1924:1974 Title missing - Legacy paper document
ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength
ISO 14916:1999 Thermal spraying - Determination of tensile adhesive strength
ISO 4136:1989 Fusion-welded butt joints in steel; transverse tensile tests
ISO 4136:2022 Destructive tests on welds in metallic materials — Transverse tensile test
ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
ISO 1184:1983 Plastics; Determination of tensile properties of films
ISO 4108:1980 Concrete; Determination of tensile splitting strength of test specimens
ISO/TR 10108:1989 Steel; conversion of hardness values to tensile strength values
ISO 21180:2005 Light conveyor belts - Determination of the maximum tensile strength
ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
ISO 3345:1975 Wood; Determination of ultimate tensile stress parallel to grain
ISO 3346:1975 Wood; Determination of ultimate tensile stress perpendicular to grain
ISO 4074-9:1980 Rubber condoms; Part 9 : Determination of tensile properties
ISO 4074-9:1996 Rubber condoms - Part 9: Determination of tensile properties
ISO 22654:2002 Footwear - Test methods for outsoles - Tensile strength and elongation
ISO 17706:2003 Footwear - Test methods for uppers - Tensile strength and elongation
ISO 3268:1978 Plastics; Glass reinforced materials; Determination of tensile properties
ISO 6892-4:2015 Metallic materials - Tensile testing - Part 4: Method of test in liquid helium
ISO 5893:1993 Rubber and plastics test equipment; tensile, flexural and compression types (constant rate of traverse); description

RU-GOST R, Tensile

GOST 938.11-1969 Leather. Tensile strength test
GOST 11262-1980 Plastics. Tensile strength test method
GOST R ISO 3781-2016 Paper and board. Determination of tensile strength after immersion in water
GOST 15613.3-1977 Massive glued wood. Method for determination of ultimate strength in tension of glued butt joint
GOST 23409.7-1978 Moulding sands, moulding and core sand mixtures. Methods for determination of compressive, tensile, bending and shearing strength
GOST 9622-1987 Laminated glued wood. Methods for determination of ultimate strenght and modulus of elasticity in tension
GOST R 57159-2016 Timber structures. Test method for pull-through resistance of timber fasteners
GOST R 57867-2017 Polymer composites. Test methods for determination of pull-through resistance
GOST 473.7-1981 Chemically resistant and heat resistant ceramic wapes. The method for determination of tensile strength
GOST 15613.5-1979 Glued massive wood. Method for determination of ultimate tensile strength of finger glued joints
GOST ISO 17706-2013 Footwear. Test methods for uppers. Tensile strength and elongation

German Institute for Standardization, Tensile

DIN 46267-2:1985-10 Non tension-proof compression joints for aluminium conductors
DIN 46267-1:1985-10 Non tension-proof compression joints for copper conductors
DIN EN 13895:2003 Textiles - Monofilaments - Determination of tensile properties; German version EN 13895:2003
DIN 53430:1975 Testing of Rigid Cellular Materials; Tensile Test
DIN 50125:2016 Testing of metallic materials - Tensile test pieces
DIN 50125:2009 Testing of metallic materials - Tensile test pieces
DIN EN 582:1994 Thermal spraying; determination of tensile adhesive strength; German version EN 582:1993
DIN 53504:2009 Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53504:2017 Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 50148:1975 Tensile test pieces for non-ferrous metals pressure die castings
DIN 53504:1994 Testing of rubber; determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 50125:2004 Testing of metallic materials - Tensile test pieces
DIN EN ISO 12625-4:2017 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016); German version EN ISO 12625-4:2016
DIN 51914:1985 Testing of carbon materials; determination of tensile strength; solid matters
DIN ISO 3781:2012 Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011)
DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
DIN EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004

SE-SIS, Tensile

MNC 320-1990 Metallic materials — Testing — Tensile and compression properties — Summary
SIS 11 21 19 E-1963 Dragprovstavar typ J
SIS 11 21 18 E-1963 Dragprovstavar typ H
SIS PR 20 04 01
SIS MNC 1109-1982 Stee/ - Comparison between hardness values and tensile strength
SIS 11 21 29 E-1973 Dragprovstav typ T
SIS 11 21 23 E-1974 Dragprovstavar typ N
SIS 11 01 21 E-1972 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS 11 21 30 E-1970 Dragprovstav typ RC
SIS SS 11 21 18-1979 Tensile test pieces type H
SIS 11 01 20 E-1972 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS 11 01 35 E-1965 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS SS 13 72 31-1983 Concrete testing - Hardened concrete - Tensile strength of test specimens
SIS 11 21 11 E-1966 Dragprovstavar typ A

GM North America, Tensile

GM GM9205P-1993 Test for Tensile Strength of a Channeled Zipper Chain

European Committee for Standardization (CEN), Tensile

EN 13587:2016 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
EN 13895:2003 Textiles - Monofilaments - Determination of tensile properties
EN 582:1993 Thermal Spraying - Determination of Tensile Adhesive Strength
prEN 26922-1992 Adhesives; determination of tensile strength of butt joints (ISO 6922:1987)
EN ISO 21180:2013 Light conveyor belts - Determination of the maximum tensile strength
prEN 895-1992 Welding; welded joints in metallic materials; transverse tensile tests
EN ISO 14916:2017 Thermal spraying - Determination of tensile adhesive strength
EN 26922:1993 Adhesives - Determination of Tensile Strength of Butt Joints (ISO 6922 : 1987)
EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
EN 895:1995 Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test
EN 15870:2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
EN 2747:1998 Aerospace series - Glass fibre reinforced plastics - Tensile test

TR-TSE, Tensile

TS 2027-1975 DETERMINATION OF DIRECT TENSILE STRBNGTH OF ROCKS
TS 245-1965 METHOD OF DETERMINING THE TENSILE STRENGHT AND ELNGATION OF A SINGLE STRAND YARN
TS 2476-1976 Wood - Dete?mination of Ultimate Tensile Stress Perpendicular to G?ain
TS 2475-1976 Wood-Determination of Ultimate Tensile Stress Parallel to Grain

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tensile

GB/T 8641-1988 Thermal sprayed coatings--Determination of tensile strength
GB/T 8721-2009 Method for the determination of tensile strength of carbonaceous materials
GB/T 8721-2019 The test method for tensile strength of carbon materials
GB/T 14017-2009 Method of testing in tensile strength perpendicular to grain of wood
GB/T 1938-2009 Methods of testing in tensile strength parallel to grain of wood
GB/T 8642-2002 Thermal spraying--Determination of tensile adhesive strength
GB/T 8721-1988 Method for the determination of tensile strength of carbonaceous materials
GB/T 14017-1992 Method of testing in tensile strength perpendicular to grain of wood
GB/T 1938-1991 Method of testing in tensile stength parallel to grain of wood
GB/T 21921-2008 Test method for tensile strength of impermeable graphite materials
GB/T 10423-2002 Sintered metal friction materials--Determination of tensile strength
GB/T 11718.7-1989 Medium density fiberboard--Determination of flush tensile strength
GB/T 17911.5-1999 Refractory ceramic fibre products--Determination of tensile strength
GB/T 28487-2012 Precious metal alloys chains.Determination of tensile strength.Method of tensile testing
GB/T 15231.4-1994 Test methods for the properties of glass fibre reinforced cement. The properties of direct tension
GB/T 13465.9-2009 Test method of the adhesion tensile strength of graphite impermeable adhesion agent

Danish Standards Foundation, Tensile

DS/ISO 6943:1986 Rubber, vulcanized. Determination of tension fatigue
DS/EN 26922:1994 Adhesives-Determination of tensile strength of butt joints
DS/EN 582:1993 Thermal spraying. Determination of tensile adhesive strength
DS/INSTA 172:1989 Building sealants. Determination of tensile properties
DS/ISO 1184:1985 Plastics. Determination of tensile properties of films
DS 423.24:1984 Testing of concrete. Hardened concrete. Tensile strength
DS/ISO 4074/9:1980 Rubber condoms. Part 9: Determination of tensile properties
DS/EN 1383:2000 Timber structures - Test methods - Pull through resistance of timber fasteners
DS/ISO 8339:1985 Building construction. Jointing products. Sealants. Determination of tensile properties

British Standards Institution (BSI), Tensile

BS ISO 6943:2011 Rubber, vulcanized. Determination of tension fatigue
BS 2TA 56:2009 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS EN 13895:2003 Textiles - Monofilaments - Determination of tensile properties
BS ISO 3781:2011 Paper and board. Determination of tensile strength after immersion in water
BS ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
BS ISO 11566:1996 Carbon fibre - Determination of the tensile properties of single-filament specimens
BS EN 15870:2009 Adhesives - Determination of tensile strength of butt joints
BS ISO 15754:2009 Paper and board - Determination of z-directional tensile strength
BS EN ISO 21180:2013 Light conveyor belts. Determination of the maximum tensile strength
BS EN 60793-1-31:2002 Optical fibres - Measurement methods and test procedures - Tensile strength
BS EN 60793-1-31:2010 Optical fibres. Measurement methods and test procedures. Tensile strength
2TA 10-1974 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
BS ISO 3342:2011 Textile glass. Mats. Determination of tensile breaking force
BS 2TA 10:1974 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
BS EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
BS EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5% ammonia test
2TA 5-1973 Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm)
2TA 9-1973 Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm)
2TA 23-1973 Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm)
2TA 24-1973 Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm)
BS EN ISO 14916:2017 Thermal spraying. Determination of tensile adhesive strength
BS EN 12803:2000 Footwear - Test methods for outsoles - Tensile strength and elongation
BS EN 12390-6:2000 Testing hardened concrete - Tensile splitting strength of test specimens
BS EN 12390-6:2009 Testing hardened concrete - Tensile splitting strength of test specimens
BS EN 895:1995 Destructive tests on welds in metallic materials - Transverse tensile test
BS EN 12803:2000(2004) Footwear - Test methods for outsoles - Tensile strength and elongation
BS EN 12390-6:2010 Testing hardened concrete. Tensile splitting strength of test specimens
2TA 1-1974 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
BS 3TA 10:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
BS EN ISO 17706:2018 Footwear. Test methods for uppers. Tensile strength and elongation
BS 2TA 59:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)
BS 2TA 1:1974 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
BS TA 59:1980 Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa)
2TA 4-1973 Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm)
2TA 8-1973 Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm)

KR-KS, Tensile

KS D 7006-2018(英文版) Covered electrodes for high tensile strength steel
KS D 3777-2018(2023) High tensile strength steel tubes for tower structural purposes
KS M ISO 15754-2022 Paper and board — Determination of z-directional tensile strength
KS M ISO 6922-2008 Adhesives－Determination of tensile strength of butt joints
KS M ISO 15361-2017 Pulps－Determination of zero-span tensile strength, wet or dry

Professional Standard - Non-ferrous Metal, Tensile

YS/T 542-2006 Determination of tensile strength of thermal sprayed coatings

Indonesia Standards, Tensile

SNI 03-4812-1998 Test method for direct tensile strength of concrete
SNI 08-0365-1989 Test method for breaking strength and elongation of sacks fabrics
SNI 07-6403-2000 Specification for low and medium tensile strength carbon steel plates
SNI 2486-2011 Cara uji kuat tarik tidak langsung batu di laboratorium

CZ-CSN, Tensile

CSN 49 0177-1966 The lest of materiál resistanc against pull through of nail head
CSN 62 1436-1982 Vulcanizotl lubbur. Detonnination of teiisilo struss-stram properties
CSN 34 7010 Cast.16-1972 Tensile strength and elongation on plastic insulation and sheaths

PT-IPQ, Tensile

E 156-1964

NL-NEN, Tensile

NEN-EN 582-1994 Thermal spraying.Determination of adhesive tensile strength
NEN 1249-1988 Paper and board - Determination of tensile properties - Constant rate of tensile force
NEN 2150-1986 Paper and board Determination of tensile strength after immersion in water
NEN-ISO 6922:1993 Adhesives. Determination of tensile strength of butt joints (ISO 6922:1987)
NEN 5969-1988 Concrete and mortar - Determination of the tensile splitting strength of testspecimens
NEN 2013-1989 Paper and board - Determination of tensile properties Constant rate of testing speed

IN-BIS, Tensile

Standard Association of Australia （SAA）, Tensile

AS 1391:2005 Metallic materials - Tensile testing at ambient temperature
AS 1145.1:2001 Determination of tensile properties of plastics materials - General principles

工业和信息化部/国防科技工业局, Tensile

WJ/T 9086-2015 Test method for tensile properties of industrial detonators

(U.S.) Ford Automotive Standards, Tensile

FORD FLTM BO 132-01-2001 TENSILE TESTING OF PARKING BRAKE CABLE COATING
FORD FLTM BP 116-01-2001 PERMANENT TENSILE SET OF CIRCULAR RUBBER COMPONENTS
FORD FLTM EU BN 017-02-2001 DETERMINATION OF TENSILE STRENGTH OF TRIM MATERIALS AFTER AGEING

HU-MSZT, Tensile

MSZ 105/18-1980

IL-SII, Tensile

S.I.455-1962 TESTING THE TENSILE STRENGTH OF FIBRES YARNS AND THREADS

AR-IRAM, Tensile

IRAM 1622-1962

Professional Standard - Electron, Tensile

SJ/T 3326-2016 Sealing tensile strength test method for ceramic-metal
SJ/T 3326-2001 Test method used in tensile strength of ceramic to metal seal
SJ 3226-1989 Test methods for ceramics-motal sealing strength against teusion

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Tensile

GB/T 34219-2017 Refractory matericals—Determination of tensile strength at room temperature
GB/T 34220-2017 Refractory Products—Determination of tensile strength at elevated temperature

ES-AENOR, Tensile

UNE 36-465-1986

CEN - European Committee for Standardization, Tensile

EN ISO 21180:2006 Light conveyor belts - Determination of the maximum tensile strength
EN 1383:1999 Timber Structures - Test Methods - Pull-Through Resistance of Timber Fasteners
EN ISO 17706:2018 Footwear - Test methods for uppers - Tensile strength and elongation

Aerospace Industries Association/ANSI Aerospace Standards, Tensile

AIA/NAS NAS 1790-1996 Bolt, 100 Degree Flush Head 160,000 PSI UTS Rev. 4

PH-BPS, Tensile

PTS 155-1972 Method of Test for Tensile Bneaking strength of Paper and Board

NO-SN, Tensile

NS 3674-1987 Concrete testing - Hardened concrete - Tensile strength

Professional Standard - Coal, Tensile

MT/T 47-1987 Method for determination of unidirectional tensile strength of coal and rock
MT 47-1987 Method for determination of unidirectional tensile strength of coal and rock

Professional Standard - Water Conservancy, Tensile

SL 237-031-1999 Code for test of soil - uniaxial tensile strength test

VN-TCVN, Tensile

TCVN 7858-2008 Cold-reduced carbon steel sheet of commercial and drawing qualities
TCVN 3120-1993 Heavy weight concrete.Method for the determination of tensile spliting strength

TH-TISI, Tensile

TIS 528-2005 Hot rolled flat carbon steel of commercial and drawing qualities

Professional Standard - Forestry, Tensile

LY/T 1410-1999 Laminated wood plastics.Compreg Determination of tension strength parallel to face grain

ZA-SANS, Tensile

SANS 6016:2005 Transverse tensile (internal bond) strength of wood-based panels
SANS 50582:1993 Thermal spraying - Determination of tensile adhesive strength
SANS 4136:2004 Destructive tests on welds in metallic materials - Transverse tensile test

Professional Standard - Chemical Industry, Tensile

HG/T 2642-2006 Test method for tensile strength of impermeable graphite materials
HG/T 2378-2007 Test method of the adhesion tensile strength of graphite adhesion agent
HG/T 2378-1992 Test method for bond tensile strength of graphite adhesive
HG/T 2642-1994 Test method for tensile strength of impermeable graphite materials

Defense Logistics Agency, Tensile

DLA MS14188 NOTICE 2-1997 SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS
DLA MS14188 VALID NOTICE 1-1991 SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS
DLA MS14188-1978 SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS

BE-NBN, Tensile

NBN-EN 10002-1-1992 Metallic materials - Tensile testing - Part 1 : Method of test
NBN-EN 10002-5-1992 Metallic materials - Tensile testing - Part 5 : Method of testing at elevated temperature
NBN EN 582-1994 Thermal spraying - Determination of tensile adhesive strength
NBN-ISO 8339:1992 Building construction - Jointing products - Sealants - Determination of tensile properties

IT-UNI, Tensile

ESDU - Engineering Sciences Data Unit, Tensile

ESDU 88008-1988 Fatigue limit of unnotched steels (related to tensile strength).

Professional Standard - Machinery, Tensile

JB/T 7424-2007 Coated abrasives.Determination of tensile strength and extensibility
JB/T 7424-1994 Method for determination of tensile strength and elongation of coated abrasives
JB/T 8133.9-1999 Test method for physical-chemical properties of electrical carbon product.Tensil strength
JB/T 9141.2-2013 Flexible graphite sheets.Part 2: Test method for tensile strength

Lithuanian Standards Office , Tensile

LST EN 1383-2000 Timber structures - Test methods - Pull through resistance of timber fasteners

Electronic Components, Assemblies and Materials Association, Tensile

ECA EIA-364-08C-2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors

ECIA - Electronic Components Industry Association, Tensile

EIA-364-08C-2015 TP-08C Crimp Tensile Strength Test Procedure for Electrical Connectors
RS-364-08A-1983 TP-08A Crimp Tensile Strength Test Procedure for Electrical Connectors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Tensile

IEEE 84-1963 Test Procedure for DETERMINING TENSILE STRENGTH and HARDNESS OF LEAD SHEATHS

TIA - Telecommunications Industry Association, Tensile

EIA-455-89A-1989 FOTP-89 Fiber Optic Cable Jacket Elongation and Tensile Strength

Professional Standard - Textile, Tensile

FZ/T 90006.1-1991 Test method for shuttles used in shuttle looms

Anhui Provincial Standard of the People's Republic of China, Tensile

DB34/T 2235-2014 Technical specification for testing the tensile strength of structural concrete by drilling and pulling method

The American Road & Transportation Builders Association, Tensile

AASHTO T 132-1987(R2009) Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars

US-FCR, Tensile

FCR COE CRD-C 260-01-2001 STANDARD TEST METHOD FOR TENSILE STRENGTH OF HYDRAULIC CEMENT MORTARS

AASHTO - American Association of State Highway and Transportation Officials, Tensile

T 132-1987 Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars

SAE - SAE International, Tensile

SAE AMS5693C-2001 Steel@ Corrosion Resistant@ Wire 18Cr - 9.0Ni Cryogenically Produced@ High Tensile Strength

ISUZU - Isuzu Motors Ltd., Tensile

ISC-F12-012-1982 Method of Measuring Tensile Strength of Brake Drums (Japanese/English Version)