ZH
RU
ES

Fault

Fault, Total:498 items.

In the international standard classification, Fault involves: Company organization and management, Nuclear energy engineering, Characteristics and design of machines, apparatus, equipment, Power transmission and distribution networks, Quality, Electrical engineering in general, Telecommunication systems, Electrical accessories, Test conditions and procedures in general, Road vehicle systems, Applications of information technology, Software development and system documentation, Vocabularies, Transport, Air quality, Industrial automation systems, Diagnostic, maintenance and test equipment, Lamps and related equipment, On-board equipment and instruments, Electrical wires and cables, Installations in buildings, Industrial trucks, Mechanical testing, Aircraft and space vehicles in general, Aerospace electric equipment and systems, Electricity. Magnetism. Electrical and magnetic measurements, Electronic components in general, Character sets and information coding, Extraction and processing of petroleum and natural gas, Mathematics, Corrosion of metals, Interface and interconnection equipment, Shipbuilding and marine structures in general, Passenger cars. Caravans and light trailers, Components for electrical equipment, Standardization. General rules, Motor cycles and mopeds, Rails and railway components, Insulating fluids, Storage equipment, Machine tool systems, Semiconductor devices, Commercial vehicles, Services, Medical equipment, Accident and disaster control, Railway engineering in general, Electromagnetic compatibility (EMC), Hydraulic energy engineering, Road vehicles in general, Rotating machinery, Transformers. Reactors, Electromechanical components for electronic and telecommunications equipment, Open systems interconnection (OSI), Geology. Meteorology. Hydrology, Bearings, Power stations in general, Space systems and operations, Fluid storage devices, Protection against dangerous goods, Tyres, Electrical equipment for working in special conditions.

SAE - SAE International, Fault

• SAE ARP926A-1979 Fault/Failure Analysis Procedure
• SAE ARP1834-1986 Fault/Failure Analysis for Digital Systems and Equipment
• SAE ARP926C-2018 Fault/Failure Analysis Procedure (Use ARP4761 for Aircraft Safety Assessment)
• SAE J2012-1992 Diagnostic Trouble Code Definitions
• SAE J2012-2016 Diagnostic Trouble Code Definitions (See Also SAE J2012DA)
• SAE J2012-1999 Recommended Practice for Diagnostic Trouble Code Definitions
• SAE J2012-1996 Recommended Practice for Diagnostic Trouble Code Definitions@ Recommended Practice
• SAE J2012-1994 Diagnostic Trouble Code Definitions
• SAE ARP1834B-2018 Fault/Failure Analysis For Digital Systems and Equipment (Use ARP 4761 for Aircraft Safety Assessment)
• SAE R-441-2015 No Fault Found: The Search for the Root Cause
• SAE R-387-2008 Tire Forensic Investigation Analyzing Tire Failure
• SAE J2869-2016 Mechanical Systems Physics-of-Failure Analysis Experimental Validation
• SAE AIR5699-2007 A Guide for the Damaging Effects of Tire and Wheel Failures
• SAE AIR1266A-1993 Fault Isolation in Environmental Control Systems of Commercial Transports
• SAE RB9-1971 Failure Mode and Effect Analyses (Formerly TechAmerica RB9)
• SAE J2012DA-2010 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions (See Also SAE J2012; Includes Access to Additional Content)
• SAE J2012DA-2018 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions (See Also SAE J2012; Includes Access to Additional Content)

Society of Automotive Engineers (SAE), Fault

• SAE ARP926A-2011 FAULT/FAILURE ANALYSIS PROCEDURE
• SAE J2012DA-2013 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
• SAE J2012DA-2016 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
• SAE J2012DA-0120 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
• SAE J2012DA-0720 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
• SAE J2012-2013 Diagnostic Trouble Code Definitions
• SAE J2012-2007 Diagnostic Trouble Code Definitions
• SAE ARINC431-2010 NO FAULT FOUND - A CASE STUDY
• SAE AIR5273-2001 Actuation System Failure Detection Methods
• SAE AIR5273-2007 Actuation System Failure Detection Methods
• SAE ARINC672-2008 GUIDELINES FOR THE REDUCTION OF NO FAULT FOUND (NFF)
• SAE J2012DTC-1220 J2012 Diagnostic Trouble Code Spreadsheet
• SAE J2869-2010 Mechanical Systems Physics-of-Failure Analysis Experimental Validation
• SAE AS6019-2023 ARC Fault Circuit Breaker (AFCB), Aircraft, Trip-Free 28 VDC
• SAE J1739-2002 Potential Failure Mode and Effects Analysis in Design (Design FMEA), Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA), and Potential Failure Mode and Effects Analysis for Machinery (Machinery FMEA)
• SAE AIR5699-2013 A Guide for the Damaging Effects of Tire and Wheel Failures
• SAE AIR1266A-2011 Fault Isolation in Environmental Control Systems of Commercial Transports
• SAE AIR769-1973 Ground Fault Protection on 400-Cycle Ground Power Unit
• SAE AIR1266B-2021 Fault Isolation in Environmental Control Systems of Commercial Transports
• SAE AIR5699A-2022 A Guide for the Damaging Effects of Tire and Wheel Failures
• SAE AIR1266-1993 FAULT ISOLATION IN ENVIRONMENTAL CONTROL SYSTEMS OF COMMERCIAL TRANSPORTS
• SAE AIR5273A-2022 Aircraft Flight Control Actuation System Failure-Detection Methods

Military Standard of the People's Republic of China-General Armament Department, Fault

• GJB 768.2-1989 Fault tree analysis method Fault tree representation
• GJB 768.3-1989 Fault tree analysis method: formal fault tree qualitative analysis
• GJB 768.1-1989 Fault tree analysis method Basic rules and methods for constructing fault trees
• GJB/Z 29A-2003 Fuze Typical Fault Tree Manual
• GJB/Z 29-1992 Fuze Typical Fault Tree Manual
• GJB/Z 29A-2021 Fuze Typical Fault Tree Manual
• GJB 4807-1997*GJBz 20448-1997 Armored vehicle failure judgment criteria
• GJB 1829-1993 Criteria for fault identification of small self-propelled anti-aircraft guns
• GJB 5564-2006 Requirement for preparation of trouble shooting manual of aircraft
• GJB/Z 179-2015 Fuze Failure Tree Bottom Event Data Book
• GJB 5084-2004 Optical fiber communication digital channel fault detection
• GJB 632-1988 Aircraft and airborne equipment malfunction codes
• GJB 1415-1992 Satellite control system fault simulation and processing
• GJB 5570-2006 Requirement for preparation of trouble shooting manual for airborne equipment
• GJB/Z 1391-2006 Guide to failure mode, effects and criticality analysis
• GJB 1391-1992 Failure mode, effects and hazard analysis procedures
• GJB 7894-2012 Requirements of processing failure in test mission for spacecraft launch site
• GJB 1415A-2020 Satellite control system fault diagnosis and processing requirements
• GJB 59.23-1989 Armored vehicle test procedures fault classification and classification
• GJB 6930-2009 General specification for malfunction detection and processing system of launch vehicle

Association Francaise de Normalisation, Fault

• NF EN 61078:2017 Diagramme de fiabilité
• NF EN 17397-1:2020 Applications ferroviaires - Défauts de rails - Partie 1 : gestion des défauts de rails
• NF C20-318*NF EN 61025:2007 Fault tree analysis (FTA).
• NF EN 61025:2007 Analyse par arbre de panne (AAP)
• NF X50-841:1997 Activité de dépannage-remorquage - Dépannage-remorquage des véhicules légers - Spécification du matériel et des moyens.
• NF EN 61124:2012 Essais de fiabilité - Plans d'essais de conformité d'un taux de défaillance constant et d'une intensité de défaillance constante
• NF EN IEC 61124:2023 Essais de fiabilité - Plans d'essai de conformité pour un taux de défaillance constant et une intensité de défaillance constante
• NF EN IEC 62812:2019 Mesures de faibles résistances - Méthodes et recommandations
• NF C61-606*NF EN 62606:2014 General requirements for arc fault detection devices
• NF C96-023:1990 Microcircuits Methodology for technology and failure analyses
• NF C20-302*NF EN IEC 60812:2018 Failure Modes and Effects analysis (FMEA and FMECA)
• NF X50-210:1992 Accident repair of light vehicles. Technical specifications.
• NF C61-606/A1*NF EN 62606/A1:2017 General requirements for arc fault detection devices
• NF EN 62606/A1:2017 Exigences générales des dispositifs pour la détection de défaut d'arcs
• NF EN 62606:2014 Exigences générales des dispositifs pour la détection de défaut d'arcs
• NF C20-327/A1:1990 Equipment reliability testing Part 7:Compliance test plans for failure rate and mean time between failures-assuming constant failure rate Clause 6 - Procedures for design and application of time terminated test plans
• NF UTE C80-811:2011 Méthodologie de fiabilité pour les systèmes électroniques - Guide FIDES 2009 Édition A
• NF E22-326:2004 Rolling bearings - Damages and failures - Terms, characteristics and causes.
• NF M88-325:1981 Road tankers in reinforced plastic. Faults. Acceptable level.
• NF E22-326*NF ISO 15243:2017 Rolling bearings - Damage and failures - Terms, characteristics and causes

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Fault

• ASHRAE 3899-1995 Fault Direction Space Method for On-Line Fault Detection
• ASHRAE CH-99-5-1-1999 Fault Detection Tool for School Buildings
• ASHRAE AC-02-12-1-2002 A Survey of Common Faults for Chillers
• ASHRAE AT-96-3-5-1996 Typical Faults of Air-Conditioning Systems and Fault Detection by ARX Model and Extended Kalman Filter
• ASHRAE 4268-1999 Common Faults and Their Impacts for Rooftop Air Conditioners
• ASHRAE AT-96-3-4-1996 Generic Approach to Identifying Faults in HVAC Plants
• ASHRAE OR-16-C065-2016 An EnergyPlus/OpenStudio-based Fault Simulator for Buildings
• ASHRAE CH-99-5-3-1999 Fault Detection and Diagnosis of HVAC Systems
• ASHRAE AT-01-14-2001 Recent Results from Fault Detection and Diagnostic Research
• ASHRAE 4545-2002 The Sensitivity of Chiller Performance to Common Faults
• ASHRAE AT-01-14-1-2001 Model-Based Fault Detection and Diagnosis for Cooling Towers
• ASHRAE 3679-1993 Fault Detection and Load Monitoring in Ventilation Systems
• ASHRAE AT-96-3-1996 Fault Detection and Diagnosis for HVAC Systems - Part I
• ASHRAE AT-96-6-1996 Fault Detection and Diagnosis for HVAC Systems - Part 2
• ASHRAE KC-03-8-1-2003 Application of Control Charts for Detecting Faults in Variable-Air-Volume Boxes
• ASHRAE CH-99-18-5-1999 Classification Techniques for Fault Detection and Diagnosis of an Air-Handling Unit
• ASHRAE AT-01-14-4-2001 An Expert Rule Set for Fault Detection in Air-Handling Units
• ASHRAE PH-97-7-1997 Symposium on HVAC System Fault Detection and Diagnosis
• ASHRAE AT-96-6-3-1996 Application of Black-Box Models to HVAC Systems for Fault Detection
• ASHRAE 4546-2002 Detection and Diagnosis of HVAC Faults Via Electrical Load Monitoring

Association of German Mechanical Engineers, Fault

• VDI 3822-2011 Failure analysis - Fundamentals and performance of failure analysis
• VDI 3822 Blatt 2-2008 Failure analysis - Failures caused by mechanical working conditions
• VDI/VDE 2650 Blatt 2-2006 Requirements regarding self-monitoring and diagnosis in field instrumentation - General faults and fault conditions
• VDI 3963-2007 Fault codes for repairs in industrial trucks
• VDI 3580-1995 High bay warehouses - Basic data to record failures
• VDI/VDE 2426 Blatt 3-2000 Catalogues in maintenance and management of medical devices - Fault catalogues
• VDI 4009 Blatt 10-1986 Analytical methods for fault detection in reliability assurance

ATIS - Alliance for Telecommunications Industry Solutions, Fault

• 0800028-2009 Fault Codes for IPTV
• 0300094-2014 Trouble Type Codes in Support of ATIS Trouble Administration Standards
• 0300094-2015 Trouble Type Codes in Support of ATIS Trouble Administration Standards
• 0300094-2008 Trouble Type Codes in Support of ATIS Trouble Administration Standards
• 0300003-2005 XML Schema Interface for Fault Management (Trouble Administration)
• 0300003-2017 XML Schema Interface for Fault Management (Trouble Administration)
• 0300003-2010 XML Schema Interface for Fault Management (Trouble Administration)
• 0300003-2012 XML Schema Interface for Fault Management (Trouble Administration)
• 0300003-2015 XML Schema Interface for Fault Management (Trouble Administration)
• 0300003A-2006 Schema Interface for Fault Management (Trouble Administration) (Supplement to ATIS-0300003)
• 0300003-2008 XML Schema Interface for Fault Management (Trouble Administration) (Pre-Pub)
• T1.278-2003 XML Schema Interface for Fault Management (Trouble Administration) (Trial-Use Standard)
• T1.227A-2001 CORBA IDL Model for Interfaces Across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)
• 0300228-2006 OAM&P – Services for Interfaces Between Operations Systems Across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)
• 0300228-2011 OAM&P – Services for Interfaces Between Operations Systems Across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)
• 0300227A-2012 Supplement to Operations@ Administration@ Maintenance@ and Provisioning (OAM&P) – Interfaces Between Operations Systems Across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)
• T1.228-1995 Telecommunications - Operations@ Administration@ Maintenance@ and Provisioning (OAM&P) - Services for Interfaces Between Operations Systems Across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)

AT-ON, Fault

• ONORM A 9013-1986 Fault tree analysis; probabilistic evaluation
• ONORM A 9012-1982 Fault tree analysis; Method and symbols

German Institute for Standardization, Fault

• DIN 25424-2:1990 Fault tree analysis; manual calculation procedures for the evaluation of a fault tree
• DIN EN 61025:2007-08 Fault tree analysis (FTA) (IEC 61025:2006); German version EN 61025:2007 / Note: DIN IEC 61025 (1993-12) remains valid alongside this standard until 2010-03-01.
• DIN 66271:1995 Information technology - Software failures and their assessment by suppliers and customers
• DIN EN 61124:2013-01 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012); German version EN 61124:2012 / Note: DIN EN 61124 (2007-01) remains valid alongside this standard until 2015-06-27.
• DIN 25448:1990 Failure mode and effects analysis (FMEA)
• DIN EN 60812:2015-08 Failure Mode and Effects analysis (FMEA) (IEC 56/1579/CD:2014) / Note: Date of issue 2015-07-03*Intended as replacement for DIN EN 60812 (2006-11).
• DIN IEC 60605-6:2007-11 Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity (IEC 60605-6:2007)
• DIN EN 60812:2015 Failure Mode and Effects analysis (FMEA) (IEC 56/1579/CD:2014)
• DIN ISO 8093:1986 Road vehicles; diagnostic testing of electronic systems; identical with ISO 8093, edition 1985

Alliance of Telecommunications Industry Solutions （ATIS), Fault

• ATIS 0300094-2008 Trouble Type Codes in Support of ATIS Trouble Administration Standards
• ATIS 0300094-2015 Trouble Type Codes in Support of ATIS Trouble Administration Standards
• ATIS 0300003-2010 XML Schema Interface for Fault Management (Trouble Administration) Pre-Pub
• ATIS 0800032-2009 Metadata for IPTV Fault Codes

Professional Standard - Machinery, Fault

• JB/T 8173-2000 Specification for fault oscillograph panel
• JB/T 11681-2013 General Requirements for Arc Fault Detection Devices (AFDD)

International Telecommunication Union (ITU), Fault

• ITU-T M.85 FRENCH-1992 FAULT REPORT POINTS
• ITU-T M.85 SPANISH-1992 FAULT REPORT POINTS
• ITU-T M.715-1988 FAULT REPORT POINT (CIRCUIT)
• ITU-T M.715 FRENCH-1988 FAULT REPORT POINT (CIRCUIT)
• ITU-T M.715 SPANISH-1988 FAULT REPORT POINT (CIRCUIT)
• ITU-T M.716-1988 FAULT REPORT POINT (NETWORK)
• ITU-T M.716 FRENCH-1988 FAULT REPORT POINT (NETWORK)
• ITU-T M.716 SPANISH-1988 FAULT REPORT POINT (NETWORK)
• ITU-T U.31-1988 PREVENTION OF CONNECTION TO FAULTY STATIONS AND/OR STATION LINES IN THE GENTEX SERVICE
• ITU-T Q.33-1989 Protection Against the Effects of Faulty Transmission on Groups of Circuits - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 17 pp
• ITU-T Q.33 FRENCH-1988 PROTECTION AGAINST THE EFFECTS OF FAULTY TRANSMISSION ON GROUPS OF CIRCUITS
• ITU-T Q.33 SPANISH-1988 PROTECTION AGAINST THE EFFECTS OF FAULTY TRANSMISSION ON GROUPS OF CIRCUITS
• ITU-T Q.130-1988 Special arrangements in case of failures in the sequence of signals
• ITU-T Q.117-1989 Alarms for Technical Staff and Arrangements in Case of Faults - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 1 pp
• ITU-T Q.117-1988 ALARMS FOR TECHNICAL STAFF AND ARRANGEMENTS IN CASE OF FAULTS

Aeronautical Radio Inc., Fault

• ARINC 628P8 ITEM 3.0 Availability Failures
• ARINC 672-2008 GUIDELINES FOR THE REDUCTION OF NO FAULT FOUND (NFF)

ECIA - Electronic Components Industry Association, Fault

• EIA 61025-2017 Fault Tree Analysis
• EIA 61124-2017 Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity

GB-REG, Fault

• REG NASA-LLIS-0839-2000 Lessons Learned ?Fault-Detection, Fault-Isolation and Recovery (FDIR) Techniques
• REG NASA-LLIS-0221-1992 Lessons Learned - Failure Analysis
• REG NASA-LLIS-0772--2000 Lessons Learned ?Fault Protection
• REG NASA-LLIS-0370--1995 Lessons Learned - DDM Power Supply Failure
• REG NASA-LLIS-0393-1995 Lessons Learned - ATMOS Laser Failure
• REG NASA-LLIS-0452-1991 Lessons Learned - Failure Analysis Investigation
• REG NASA-LLIS-1734--2006 Lessons Learned ?Antenna Pole Failure
• REG NASA-LLIS-0570-1997 Lessons Learned ?SCUBA hose failure
• REG NASA-LLIS-0931-2000 Lessons Learned ?Faulty Chair Mechanism
• REG NASA-LLIS-0561-1997 Lessons Learned ?Voyager Plated - Through Hole Failures (1976)
• REG NASA-LLIS-0474-1993 Lessons Learned ?Telephone System Failure
• REG NASA-LLIS-0650-2000 Lessons Learned ?Fail Safe Firex/Deluge System
• REG NASA-LLIS-0616-1998 Lessons Learned ?Building 4777 Impeller Tip Failure
• REG NASA-LLIS-0989-2001 Lessons Learned ?ETU Laser Diode Pump Array Failure - Indium gasket short between contacts caused electrical failure
• REG NASA-LLIS-0606-1998 Lessons Learned - High Pressure Steam Strainer Failure
• REG NASA-LLIS-0507-1994 Lessons Learned - Prevention of LaRC T-38 Canopy Failures
• REG NASA-LLIS-0389--1995 Lessons Learned - In-Flight Power Converter Failure
• REG NASA-LLIS-1219--2000 Lessons Learned - Integrated Configuration Control/Troubleshooting
• REG NASA-LLIS-0757--2000 Lessons Learned ?The Team Approach to Fault-Tree Analysis
• REG NASA-LLIS-0908-2000 Lessons Learned ?NOAA-15(K) S-Band Antenna Failure
• REG NASA-LLIS-0870-2000 Lessons Learned ?Fault Isolation Using Terminal Blocks
• REG NASA-LLIS-0791--2000 Lessons Learned ?Risk Rating of Problem/Failure Reports
• REG NASA-LLIS-2049-2009 Lessons Learned ?Improving Fault Management for Spaceflight Missions
• REG NASA-LLIS-0492-1997 Lessons Learned - Galileo High Gain Antenna (HGA) Failure (1991)

Korean Agency for Technology and Standards (KATS), Fault

• KS A IEC 61025:2003 Fault Tree Analysis(FTA)
• KS A IEC 61025-2003(2018)
• KS A IEC 61124:2005 Reliability testing-Compliance tests for constantfailure rate and constant failure intensity
• KS A IEC 61124:2021 Reliability testing — Compliance tests for constant failure rate and constant failure intensity
• KS A IEC 61124-2005(2015) Reliability testing－Compliance tests for constantfailure rate and constant failure intensity
• KS A IEC 61650:2003 Reliability data analysis techniques-Procedures for comparison of two constant failure rates and two constant failure(event) intensities
• KS C 4621-2011 Residual current operated circuit-breaker with integral overcurrent protection for household uses(RCBO)
• KS C 4617-1998(2008) Fault interrupter for underground line
• KS A IEC 60812:2003 Failure Mode and Effects Analysis(FMEA)
• KS C 4617-1998 Fault interrupter for underground line
• KS A IEC 60605-6:2003 Equipment reliability testing－Part 6：Tests for the validity of the constant failure rate or constant failure intensity assumptions
• KS C 6032-1981(2016) General test procedure of failure rate for electronic components
• KS C IEC 62606-2014(R2019) General requirements for arc fault detection devices
• KS C IEC 62606-2014(2019) General requirements for arc fault detection devices
• KS C 6032-1981(2021) General test procedure of failure rate for electronic components
• KS C 6105-1981(2008) F type interference suppressors for standard broadcast band
• KS A 3112-2007(2022) Failure Reporting, Analysis and Corrective Action System (FRACAS)
• KS A 3112-2007(2017) Failure Reporting, Analysis and Corrective Action System (FRACAS)
• KS A 3112-2007 Failure Reporting, Analysis and Corrective Action System(FRACAS)
• KS X 3106-2013 Automatic fault isolation procedures using test loops
• KS X 3106-2006(2011) Automatic fault isolation procedures using test loops

CZ-CSN, Fault

• CSN 49 0015-1976
• CSN IEC 1025:1994 Fault tree analysis (FTA)
• CSN 38 0709-1966 Suppression of Earth-fault Currents in H V. Systems
• CSN 33 3070-1979 Electric engineering regulations. Suppression of earth-fault currents in high voltage network

International Electrotechnical Commission (IEC), Fault

• IEC 61025:1990 Fault tree analysis (FTA)
• IEC 61025:2006 Fault tree analysis (FTA)
• IEC 61124:2012/COR1:2013 Reliability testing - Compliance tests for constant failure rate and constant failure intensity; Corrigendum 1
• IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
• IEC 62606:2013+AMD1:2017 CSV General requirements for arc fault detection devices
• IEC 62606:2013/COR1:2013 General requirements for arc fault detection devices; Corrigendum 1
• IEC 62606:2013/AMD1:2017 General requirements for arc fault detection devices

US-FCR, Fault

• FCR FED H-08-4 VOL 4-E-NC-14-1988 GAS FAILURE ALARM
• FCR COE ETN 78-9-1978 GROUND FAULT PROTECTION AT CONSTRUCTION SITES
• FCR FED OSHA 3007-1998 GROUND-FAULT PROTECTION ON CONSTRUCTION SITES
• FCR COE ETN 82-7-1982 FACILITIES ENGINEERING MAINTENANCE AND REPAIR CAPACITOR FAILURES

American Industrial Hygiene Association （AIHA), Fault

• ASSE 5000-APPENDIX E-1998 Trouble-Shooting Guide
• ASSE 5000-APPENDIX A-1998 Trouble Shooting Flow Charts

Danish Standards Foundation, Fault

• DS/EN 61025:2007 Fault tree analysis (FTA)
• DS/EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity

American National Standards Institute （ANSI), Fault

• ANSI/ATIS 0100012-2013 Standard Outage Classification
• ANSI/ATIS 0300003-2012 XML Schema Interface for Fault Management (Trouble Administration)
• ANSI C136.26-2010 Troubleshooting Guide for HID Luminaires
• ANSI/ATIS 0100030-2012 Mean Time Between Outages - A Generalized Metric for Assessing Production Failure Rates in Telecommunications Network Elements
• ANSI/EIA 671:1996 Component Problem Analysis and Corrective Action Requirements
• ANSI/NECA 169-2010 Standard for Installing and Maintaining Arc-Fault Circuit Interrupters (AFCIs) and Ground-Fault Circuit Interrurpters (GFCIs)
• ANSI/ATIS 0300227.a-2012 Supplement to ATIS 0300228.2007, OAM&P - Interface to Support Fault Management (Trouble Administration)
• ANSI/AIAA S-102.2.18-2008 Performance-Based Fault Tree Analysis Requirements
• ANSI/IEEE 495:2007 Guide for Testing Faulted Circuit Indicators
• ANSI/UL 1699-2017 UL Standard for Safety Arc-Fault Circuit-Interrupters (Third Editioin)
• ANSI/AIAA S-102.1.5-2008 Performance-Based Failure Review Board (FRB) Requirements
• ANSI/IEEE C57.12.59:2002 Guide for Dry-Type Transformer Through-Fault Current Duration
• ANSI/IEEE 1234:2007 Guide for Fault Locating Techniques on Shielded Power Cable Systems

Standard Association of Australia （SAA）, Fault

• AS IEC 61025:2008

Professional Standard - Military and Civilian Products, Fault

• WJ 2436-1997 Classification of firearm failure

AENOR, Fault

• UNE-EN 61025:2011 Fault tree analysis (FTA)
• UNE-EN 61124:2014 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
• UNE-EN 62606:2014 General requirements for arc fault detection devices
• UNE 135480-3:2006 IN Road equipment. Maintenance. Recommendations for breakdowns codification
• UNE-EN ISO 10365:1996 ADHESIVES. DESIGNATION OF MAIN FAILURE PATTERNS. (ISO 10365:1992).

IETF - Internet Engineering Task Force, Fault

• RFC 4951-2007 "Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) ""failover"""
• RFC 8156-2017 DHCPv6 Failover Protocol
• RFC 8104-2017 Pseudowire (PW) Endpoint Fast Failure Protection
• RFC 7455-2015 Transparent Interconnection of Lots of Links (TRILL): Fault Management
• RFC 6427-2011 MPLS Fault Management Operations@ Administration@ and Maintenance (OAM)
• RFC 4379-2006 Detecting Multi-Protocol Label Switched (MPLS) Data Plane Failures
• RFC 8029-2017 Detecting Multiprotocol Label Switched (MPLS) Data-Plane Failures

RO-ASRO, Fault

• STAS R 12500/3-1987 Ultrasonic fault detection CHECKING LP METHODS IX SERVICE OF ULTRASONICFAULT DETECTORS
• STAS 9139/14-1981 MAN MADE FIBRES Faults determination

Underwriters Laboratories (UL), Fault

• UL 943B BULLETINS-2005 Ground-fault circuit-interrupters
• UL 94-2022 Ground-fault circuit-interrupters
• UL 94-2020 Ground-fault circuit-interrupters
• UL 943-2006 Ground-fault circuit-interrupters
• UL 94-2021 Ground-fault circuit-interrupters
• UL 94-2018 Ground-fault circuit-interrupters
• UL 943 BULLETINS-2002 Ground-fault circuit-interrupters
• UL 943 BULLETINS-2003 Ground-fault circuit-interrupters
• UL 943-1993 Ground-fault circuit-interrupters
• UL 3801 BULLETIN-2018 UL Outline for Investigation Fault Limiters
• UL 1053-1999 UL Standard for Safety Ground-Fault Sensing and Relaying Equipment Sixth Edition
• UL 1699 BULLETIN-2011 UL Standard for Safety Arc-Fault Circuit-Interrupters
• UL 943 BULLETIN-2005 UL Standard for Safety Ground-Fault Circuit-Interrupters
• UL 943 BULLETIN-2003 UL Standard for Safety Ground-Fault Circuit-Interrupters
• UL SUBJECT 3801-2018 UL Outline for Investigation Fault Limiters (Issue 1)
• UL SUBJECT 943C-2011 Outline of investigation for special purpose ground-fault circuit-interrupters
• UL SUBJECT 2748A-2014 Outline of Investigation for Arcing Fault Interrupting Devices (Issue 2)
• UL SUBJECT 2748-2011 OUTLINE OF INVESTIGATION FOR ARCING FAULT MITIGATION EQUIPMENT (Issue No. 1)
• UL 1699-2006 UL Standard for Safety Arc-Fault Circuit-Interrupters Second Edition; Reprint with revisions through and including February 28, 2007
• UL 1699A BULLETIN-2013 OUTLINE OF INVESTIGATION FOR OUTLET BRANCH CIRCUIT ARC-FAULT CIRCUIT-INTERRUPTERS
• UL SUBJECT 2748-2015 UL Outline for Investigation Arcing Fault Quenching Equipment (Issue 3)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fault

• GB/T 7829-1987 Procedure for fault tree analysis
• GB 7829-1987 Fault Tree Analysis Program
• GB/T 4888-1985 Terms and symbols of fault tree
• GB/T 4888-2009 Terms and symbols for fault tree
• GB/T 32673-2016 Technical guide of fault inspection for overhead transmission line
• GB/T 4474-1992 Proximity Fault Test of AC High Voltage Circuit Breaker
• GB/T 31143-2014 General requirements for arc fault detection devices (AFDD)
• GB/T 13626-2001 Application of the single failure criterion to safety systems in nuclear power plant
• GB/T 13626-2008 Application of the single failure criterion to safety systems in nuclear power plant

US-VA, Fault

• VA FED H-08-4 VOL 4-E-NC-14-1988 GAS FAILURE ALARM

American Gear Manufacturers Association, Fault

• AGMA 912-A04-2004 Mechanisms of Gear Tooth Failures
• AGMA 08FTM13-2008 Hydrogen and Internal Residual Stress Gear Failures - Some Failure Analyses and Case Studies
• AGMA 08FTM01-2008 Parametric Study of the Failure of Plastic Gears
• AGMA 05FTM20-2005 Dual Drive Conveyor Speed Reducer Failure Analysis
• AGMA 04FTM10-2004 The Failure Investigation and Replacement of a Large Marine Gear
• AGMA 06FTM11-2006 On Tooth Failure Analysis in Small--Teeth--Number Gearing: An Analytical Approach

(U.S.) Parachute Industry Association, Fault

• PIA-TB-230-1998 Main Canopy Malfunctions Photos
• PIA-TB-231-1998 Main Canopy Malfunctions Slides

Taiwan Provincial Standard of the People's Republic of China, Fault

• CNS 4982-1992 Warning Reflex Reflectors for Automobiles
• CNS 4983-1992 Method of Test for Warning Reflex Reflectors for Automobiles
• CNS 11381-1-1985 Glossary of Terms for Reliability (Terms of Failure)
• CNS 11381.1-1985 Glossary of Terms for Reliability (Terms of Failure)
• CNS 11476-1994 General Test Procedure of Failure Rate for Electronic Components

未注明发布机构, Fault

• GJB/Z 768A-1998 Fault Tree Analysis Guide
• GJB 841-1990 Failure reporting, analysis and corrective action system
• GJB 7635-2012 Requirements for preparation of military helicopter failure analysis manual

GOSTR, Fault

• GOST R IEC 60605-6-2007 Reliability in techniques. Tests for the validity of the constant failure rate and failure intensity
• GOST R 51901.12-2007 Risk management. Procedure for failure mode and effects analysis

RU-GOST R, Fault

• GOST R IEC 61650-2007 Reliability in techniques. Procedures for comparison of constant failure rates and constant failure intensities
• GOST R 51901.13-2005 Risk management. Fault tree analysis
• GOST R 27.302-2009 Dependability in technics. Fault tree analyses

HU-MSZT, Fault

• MSZ 16456/2-1975
• MSZ 18956-1985
• MSZ 7494-1982
• MSZ 18971-1985

Professional Standard - Public Safety Standards, Fault

• GA 184-1999 Warning retro reflectors for defective automobiles

European Committee for Standardization (CEN), Fault

• HD 617 S1-1992 Fault tree analysis (FTA) (IEC 1025:1990)
• prEN 61132-1991 Failure rate prediction of items having a series structure

WRC - Welding Research Council, Fault

• BULLETIN 19-1954 REVIEW OF WELDED SHIP FAILURES

KR-KS, Fault

• KS A IEC 61124-2021 Reliability testing — Compliance tests for constant failure rate and constant failure intensity
• KS A IEC 60812-2003(2023)
• KS A IEC 61650-2003(2023)
• KS A IEC 60605-6-2003(2023)

CENELEC - European Committee for Electrotechnical Standardization, Fault

• EN 61124:2006 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
• EN IEC 60812:2018 Failure modes and effects analysis (FMEA and FMECA)

European Committee for Electrotechnical Standardization（CENELEC）, Fault

• EN 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
• EN 61025:2007 Fault tree analysis (FTA)
• EN 62606:2013 General requirements for arc fault detection devices
• EN 62606:2013/A1:2017 General requirements for arc fault detection devices

Group Standards of the People's Republic of China, Fault

• T/CIE 123-2021 Fault Diagnosis and Predictive Maintenance of Industrial Robots Part 3: Fault Diagnosis
• T/SHQAII 102-2022 Guidance for E-commerce SaaS product system fault classification
• T/FSAS 24-2018 Specification for Fault Diagnosis of Industrial Robots
• T/CEC 203-2019 Fault phase grounding arc suppression device via reactor
• T/CSEE 0159-2020 Technical specifications for power cable fault detection vehicle
• T/EGAG 014-2022 Quality test specification for fault injection test tool
• T/CSEE 0048-2017 Technical specifications of transient recorder type fault indicator
• T/CEC 712-2022 Guidelines for the Configuration of Fault Recording in Pumped Storage Power Stations
• T/QGCML 185-2021 Fault Diagnosis Method for Multiplexing Channel of Pilot Protection
• T/CIE 116-2021 Electronic Components Fault Tree Analysis Method and Program
• T/CSAE 42-2015 Electric vehicle CAN bus fault diagnosis service specification
• T/QGCML 185-2023 Fault diagnosis method for pilot protection multiplexing channel
• T/QGCML 1735-2023 Arc ultrasonic fault location online monitoring device
• T/AHMS 0005-2023 Guidelines for malfunction alarm level of surface meteorological observation

ES-UNE, Fault

• UNE-EN IEC 61124:2023 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (Endorsed by Asociación Española de Normalización in May of 2023.)
• UNE-EN 62606:2014/A1:2018 General requirements for arc fault detection devices

AGMA - American Gear Manufacturers Association, Fault

• 08FTM13-2008 Hydrogen and Internal Residual Stress Gear Failures - Some Failure Analyses and Case Studies
• 05FTM20-2005 Dual Drive Conveyor Speed Reducer Failure Analysis
• 04FTM10-2004 The Failure Investigation and Replacement of a Large Marine Gear

Professional Standard - Traffic, Fault

• JT/T 632-2005 Computer monitor for vehicle trouble diagnosis

ACI - American Concrete Institute, Fault

• ACI SCM-17-2008 Troubleshooting Concrete Construction
• ACI SCM-17-2005 Troubleshooting Concrete Construction

Lithuanian Standards Office , Fault

• LST EN 61025-2007 Fault tree analysis (FTA) (IEC 61025:2006)
• LST EN 61124-2006 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2006)
• LST EN 61124-2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012)

British Standards Institution (BSI), Fault

• 18/30378905 DC BS EN 61025. Fault tree analysis (FTA)
• 21/30434436 DC BS EN IEC 61025. Fault tree analysis (FTA)
• BS EN IEC 61124:2023 Tracked Changes. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
• 19/30404091 DC BS EN IEC 61124. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
• BS EN 62606:2013 General requirements for arc fault detection devices
• BS EN 62606:2013+A1:2017 General requirements for arc fault detection devices
• BS ISO 15243:2004 Rolling bearings - Damage and failures - Terms, characteristics and causes

Professional Standard - Aviation, Fault

• HB 6158-1988 Classification of Reliability Test Faults
• HB 8485-2014 Requirements for fault isolation in environmental control system of civil aircraft

交通运输部, Fault

• JT/T 632-2018 Car fault computer diagnostic instrument

American Welding Society (AWS), Fault

• WRC 019:1954 Review of Welded Ship Failures

IN-BIS, Fault

• IS 8161 Pt.7-1977

Defense Logistics Agency, Fault

• DLA MIL-STD-690 D-2005 FAILURE RATE SAMPLING PLANS AND PROCEDURES
• DLA QPL-83287-2012 Indicators, Fault Locating, General Specification for
• DLA MIL-STD-690 D CHANGE 1-2013 FAILURE RATE SAMPLING PLANS AND PROCEDURES
• DLA QPL-83287-24-2004 INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR
• DLA MIL-PRF-83287 G (1)-2010 INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR
• DLA MIL-PRF-83287 G-2007 INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR
• DLA A-A-55458 C-2003 INTERRUPTER, GROUND FAULT, TWO-POLE, THREE-WIRE, 15-AMPERE
• DLA A-A-55459 C-2003 INTERRUPTER, GROUND FAULT, TWO-POLE, THREE-WIRE, 20-AMPERE
• DLA A-A-55458 D-2009 INTERRUPTER, GROUND FAULT, TWO-POLE, THREE-WIRE, 15-AMPERE
• DLA A-A-55459 D-2009 INTERRUPTER, GROUND FAULT, TWO-POLE, THREE-WIRE, 20-AMPERE

ZA-SANS, Fault

• NRS 068-2002 Electricity distribution - Cable earth fault indicator
• NRS 072-2003 Overhead line fault path indicators
• SANS 1809:2003 Fail-safe underground mine locomotive control systems
• SANS 570:2008 Directional stability performance of vehicles in the event of tyre failure

Anhui Provincial Standard of the People's Republic of China, Fault

• DB34/T 3552-2019 Elevator breakdown repair service specification

Professional Standard - Automobile, Fault

• QC/T 34-1992 Failure Modes and Classifications of Automobiles
• QC/T 903-2013 Fault-types for motorcycles and mopeds

Professional Standard - Railway, Fault

• TB/T 2615-1994 Railway Signaling Failures - Safety Principles
• TB/T 2807-1997 Specifications for Electrified Railway Fault Indicators

Professional Standard - Energy, Fault

• NB/T 20558-2019 Guidelines for Fault Tree Analysis of Nuclear Power Plants
• DL/T 2456-2021 Technical Specifications for Fault Detection and Finding of Transmission Cables
• NB/T 10674-2021 Technical Requirements for DC Fault Current Controller
• NB/T 20096-2012 Failure mode and effects analysis for system of nuclear power plants
• NB/T 10905-2021 Fault classification and codes of electric vehicle charging facilities

国家铁路局, Fault

• TB/T 2615-2018 Railway signal failure - safety principles

U.S. Military Regulations and Norms, Fault

• ARMY MIL-STD-40051-3 B CHANGE 2-2006 TECHNICAL MANUALS TROUBLESHOOTING PROCEDURES

United States Navy, Fault

• NAVY A-A-50631-1995 BUS FAILURE ALARM, ELECTRICAL, SHIPBOARD
• NAVY MIL-HDBK-2155-1985 HANDBOOK FOR FAILURE REPORTING, ANALYSIS AND CORRECTIVE ACTION SYSTEM

Professional Standard - Electron, Fault

• SJ 20955-2006 Indicators, fault locating, general specification for
• SJ 20135-1992 Vibration monitoring and mechanical fault diagnosis for electronic equipments

Institute of Electrical and Electronics Engineers (IEEE), Fault

• IEEE 495-1986 Guide for testing faulted circuit indicators
• IEEE 495-2007 Guide for Testing Faulted Circuit Indicators
• ANSI/IEEE Std 495-1986 IEEE Guide for Testing Faulted Circuit Indicators
• IEEE Std 495-2007 IEEE Guide for Testing Faulted Circuit Indicators - Redline
• IEEE 1415-2006 Induction Machinery Maintenance Testing and Failure Analysis
• IEEE Std C57.12.59/COR-2006 Errata to IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
• ANSI/IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
• IEEE Std C57.109-1985 IEEE Guide for Transformer Through-Fault-Current Duration
• IEEE P495/D1, August 2023 IEEE Draft Standard for Testing Faulted Circuit Indicators
• IEEE 1234-2007 Guide for Fault-Locating Techniques on Shielded Power Cable Systems
• IEEE 1610-2016 Guide for the Application of Faulted Circuit Indicators on Distribution Circuits
• IEEE P1610/D9, September 2016 IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Fault

• JEDEC JESD659B-2007 Failure-Mechanism-Driven Reliability Monitoring [Replaced: JEDEC JESD29-A]
• JEDEC JESD659-A-1999 Failure-Mechanism-Driven Reliability Monitoring
• JEDEC JESD85-2001 Methods for Calculating Failure Rates in Units of FITs
• JEDEC JEP122C-2006 Failure Mechanisms and Models for Silicon Semiconductor Devices

IPC - Association Connecting Electronics Industries, Fault

• IPC 9121-2016 Troubleshooting for Printed Board Fabrication Processes
• IPC 9121 CHINESE-2016 Troubleshooting for Printed Board Fabrication Processes
• IPC PE-740A CD-1997 Troubleshooting for Printed Board Manufacture and Assembly
• IPC PE-74- Trouble Shooting Guide for Printed Board Manufacture and Assembly
• IPC 9121-AM1-2018 Troubleshooting for PCB Fabrication Processes Amendment 1

Canadian Standards Association (CSA), Fault

• CSA C22.2 NO.270-2014 Arc fault protective devices (First Edition)
• CSA C22.2 No.144.1-06 UPD 1-2007 Ground-Fault Circuit-Interrupters First Edition
• CSA C22.2 No.144.1-06-2006 Disjoncteurs diff閞entiels Premi鑢e 閐ition; Mise ?jour no. 1: 4/2007; Mise ?jour no. 2: 2/2008; Mise ?jour no. 3: 5/2010

NEMA - National Electrical Manufacturers Association, Fault

• NEMA 280-1984 APPLICATION GUIDE FOR GROUND FAULT CIRCUIT INTERRUPTERS
• NEMA ICS 2.2-1983 Maintenance of Motor Controllers After a Fault Condition
• NEMA PB 2.2-1983 APPLICATION GUIDE FOR GROUND FAULT PROTECTIVE DEVICES FOR EQUIPMENT
• NEMA PB 2.2-1988 Application Guide for Ground Fault Protective Devices for Equipment
• NEMA PB 2.2-2014 Application Guide for Ground Fault Protective Devices for Equipment

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Fault

• IEEE 495-1985 Guide for Testing Faulted Circuit Indicators
• IEEE C37.114-2014 Guide for Determining Fault Location on AC Transmission and Distribution Lines
• IEEE C37.114-2004 Guide for Determining Fault Location on AC Transmission and Distribution Lines
• IEEE C57.109-1985 GUIDE FOR TRANSFORMER THROUGH-FAULT-CURRENT DURATION
• IEEE C37.10-1995 Guide for Diagnostics and Failure Investigation of Power Circuit Breakers
• IEEE C57.109-1993 Guide for Liquid-Immersed Transformer Through-Fault-Current Duration
• IEEE C37.10-2011 Guide for Investigation@ Analysis@ and Reporting of Power Circuit Breaker Failures

Gansu Provincial Standard of the People's Republic of China, Fault

• DB62/T 2765-2017 Plug type arc fault protection switch

National Metrological Technical Specifications of the People's Republic of China, Fault

• JJF(机械) 1042-2020 Calibration Specifications for Cable Fault Testers
• JJF(机械)1042-2020 Calibration Specifications for Cable Fault Testers

API - American Petroleum Institute, Fault

• API PUBL 4637-1996 Analysis of Causes of Failure in High Emitting Cars

National Electrical Manufacturers Association（NEMA), Fault

• NEMA 280-1990 Application Guide for Ground Fault Circuit Interrupters
• NEMA PB 2.2-2004 Application Guide for Ground Fault Protective Devices for Equipment
• NEMA PB 2.2-1999 Application Guide for Ground Fault Protective Devices for Equipment

Professional Standard - Petroleum, Fault

• SY/T 5247-2008 Recommended handling methods of downhole problems in driling
• SY 5247-2008 Recommended methods for troubleshooting downhole drilling
• SY/T 6484-2005 Recommended practice for operations, maintenance, and trouble-shooting of gas lift installations

Society of Motion Picture and Television Engineers (SMPTE), Fault

• SMPTE 269M-1999 Television - Fault Reporting in Television Systems
• SMPTE ST 269M-1999 Television - Fault Reporting in Television Systems

ANSI - American National Standards Institute, Fault

• INCITS 275-1996 Information Technology - Fault Isolation - Information Characterization
• X3.275-1996 Information Technology - Fault Isolation - Information Characterization

American Institute of Aeronautics and Astronautics (AIAA), Fault

• AIAA S-102.2.18-2009 Performance-Based Fault Tree Analysis Requirements
• AIAA S-102.1.5-2009 Performance-Based Failure Review Board (FRB) Requirements

NATO - North Atlantic Treaty Organization, Fault

• STANAG 2940-1985 Reporting of Major Ammunition Malfunctions (ED 2 AMD 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For addit
• STANAG 2940-1995 Reporting of Ammunition Malfunctions (ED 3; Amendment 3 - 08/27/2001; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.

AIAA - American Institute of Aeronautics and Astronautics, Fault

• S-102.2.18-2009 Performance-Based Fault Tree Analysis Requirements
• S-102.1.5-2009 Performance-Based Failure Review Board (FRB) Requirements

国家市场监督管理总局、中国国家标准化管理委员会, Fault

• GB/T 41397-2022 Quality control of production process—Fault diagnostics
• GB/T 39129-2020 Numerical control system of machine tool—Fault diagnosis and correction specification

American Society for Testing and Materials (ASTM), Fault

• ASTM G161-00(2018) Standard Guide for Corrosion-Related Failure Analysis

国家能源局, Fault

• NB/T 10580-2021 Wind turbine fault coding specifications

SE-SIS, Fault

• SIS SEN 04 05 26

Professional Standard-Ships, Fault

• CB 1379-2005 Failure classification of reliability test for ship products

Professional Standard - Electricity, Fault

• DL/T 1157-2012 Specification of fault indicators for distribution lines
• DL/T 1481-2015 Guide of fault risk calculation for overhead transmission line
• DL/T 1350-2014 General specification for fault separation equipment of substation
• DL/T 1157-2019 General specification for distribution line fault indicator
• DL/T 1296-2013 Technical specification of series resonant fault current limiter
• DL/T 357-2010 Specification for transmission line fault location equipment based on traveling wave
• DL/T 337-2010 Coal feeder fault diagnosis and automatic loosening device for coal silo

American Society of Mechanical Engineers (ASME), Fault

• ASME SEC XI D1 NMA APP G-2002 Appendix G Fracture Toughness Criteria for Protection Against Failure

PL-PKN, Fault

• PN P04681-1987 Filament yarn Determination of number of faults on the surface of package
• PN P67012-1988 Household sewing machines Names of stitches and stitch faults

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fault

• GB/T 35721-2017 Distributed fault diagnosis system of transmission lines
• GB/T 35695-2017 Technology guide for preventing bird-related outages of overhead transmission lines
• GB/T 35708-2017 Testing method of fault location system in plateau distribution network

Japanese Industrial Standards Committee (JISC), Fault

• JIS E 3702:1974 Out of order indicators for level crossing signal
• JIS E 3704:1992 Operating switch for obstruction warning device of level crossing
• JIS B 1562:2009 Rolling bearings -- Damage and failures -- Terms, characteristics and causes

TIA - Telecommunications Industry Association, Fault

• IEB11-1972 Fault Isolation Methods for Data Communications Systems

Instrument Society of America (ISA), Fault

• ISA TRBLSHT-A TECH GUD-2006 Troubleshooting - A Technician's Guide (Second Edition)

ISA - International Society of Automation, Fault

• ISA TRBLSHT - A TECH GUD-2006 Troubleshooting - A Technician's Guide (Second Edition)

Professional Standard - Post and Telecommunication, Fault

• YD/T 2496-2013 Mitigation method of electromagnetic fault in communication installation

Illuminating Engineering Society of North America, Fault

• IESNA TM-26-2015 Methods for Projecting Catastrophic Failure Rate of LED Packages

US-Unspecified Preparing Activity, Fault

• DI-SESS-81927-2013 Failure Analysis and Corrective Action Report (FACAR) (NAVY)

Professional Standard - Aerospace, Fault

• QJ 2437-1993 Satellite Failure Mode Impact and Criticality Analysis
• QJ 1544A-1996 Defect,nonconformity,failure and hazard classiffication for astronautical product

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Fault

• GJB 5363-2005 Test method for machinery rehearsal of ground-to-ground solid propellant strategic missile ground equipments

International Organization for Standardization (ISO), Fault

• ISO 8093:1985 Road vehicles; Diagnostic testing of electronic systems
• ISO 15243:2004 Rolling bearings - Damage and failures - Terms, characteristics and causes
• ISO 27026:2011 Space systems - Programme management - Breakdown of project management structures

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Fault

• IPC TR-460A-1984 Trouble Shooting Checklist for Wave Soldering of Printed Wiring Boards

ECSS - European Cooperation for Space Standardization, Fault

• Q-ST-40-12C-2008 Fault tree analysis - Adoption notice ECSS/IEC 61025 (Second Issue)

ANS - American Nuclear Society, Fault

• 51.7-1977 SINGLE FAILURE CRITERIA FOR PWR FLUID SYSTEMS (ANSI N658-1976)

Fujian Provincial Standard of the People's Republic of China, Fault

• DB35/T 1801-2018 General specification for distribution line fault indicator

CN-QIYE, Fault

• Q/GDW 627-2011 Technical Specifications for DC Fault Recording Devices in Converter Stations

CN-STDBOOK, Fault

• 图书 3-9155 Typical Defects and Fault Identification of Overhead Transmission Lines

European Telecommunications Standards Institute (ETSI), Fault

• ETSI TS 132 111-1-2000 Universal Mobile Telecommunications System (UMTS); Telecommunication Management; Fault Management; Part 1: 3G Fault Managment Requirements 3GPP TS 32.111-1 Version 3.2.0 Release 1999

ETSI - European Telecommunications Standards Institute, Fault

• TS 132 111-1-2001 Universal Mobile Telecommunications System (UMTS); Telecommunication Management; Fault Management; Part 1: 3G Fault Management Requirements (3GPP TS 32.111-1 Version 4.0.0 Release 4)
• TS 132 111-1-2002 Universal Mobile Telecommunications System (UMTS); Telecommunication management; Fault management; Part 1: 3G Fault management requirements (3GPP TS 32.111-1 Version 4.0.1 Release 4)
• TS 132 111-1-2000 Universal Mobile Telecommunications System (UMTS); Telecommunication Management; Fault Management; Part 1: 3G Fault Managment Requirements (3G TS 32.111-1 Version 3.1.0 Release 1999)

CH-SNV, Fault

• VSM 12786-1971

AASHTO - American Association of State Highway and Transportation Officials, Fault

• PP39-1999 Standard Practice for Estimating Faulting of Concrete Pavements
• R 36-2004 Standard Practice for Evaluating Faulting of Concrete Pavements
• R 36-2012 Standard Practice for Evaluating Faulting of Concrete Pavements
• R 36-2017 Standard Practice for Evaluating Faulting of Concrete Pavements
• R 36-2013 Standard Practice for Evaluating Faulting of Concrete Pavements

American Bearing Manufacturers Association, Fault

• ABMA 15243-2010 Rolling Bearings - Damage and Failures - Terms, Characteristics, and Causes

Government Electronic & Information Technology Association, Fault

• GEIA-GEB-0002-2003 Reducing the Risk of Tin Whisker-Induced Failures in Electronic Equipment

The American Road & Transportation Builders Association, Fault

• AASHTO R 36-2013 Standard Practice for Evaluating Faulting of Concrete Pavements

Others:   Failure Analysis, Fault, Failure Analysis, latent failure, frequency failure, error code, error occured, malfunction, Troubleshooting, probabilistic failure, Fault detection, pump failure, Equipment failure, Equipment failure, malfunctioning device, Fault judgment, troubleshooting, Fault judgment, Troubleshooting, failure.