ZH
RU
ES

Quality Monitoring Emissions

Quality Monitoring Emissions, Total:388 items.

In the international standard classification, Quality Monitoring Emissions involves: Air quality, Nuclear energy engineering, Water quality, Radiation measurements, Gas and steam turbines. Steam engines, Ferrous metals, Internal combustion engines, Environmental protection, Quality, Pumps, Transport, Shipbuilding and marine structures in general, Small craft, Fluid power systems, Wood-based panels, Vocabularies, Microbiology, Farming and forestry, Microprocessor systems, Commercial vehicles, Acoustics and acoustic measurements, Radiation protection, Safety of machinery, Protection against dangerous goods, Protection against fire, Wastes, Software development and system documentation, Internal combustion engines for road vehicles.

Association Francaise de Normalisation, Quality Monitoring Emissions

NF EN 15859:2010 Qualité de l'air - Certification des analyseurs automatiques pour la surveillance des systèmes de réduction des poussières à l'émission des sources fixes - Spécifications de performance et modes opératoires d'essai
XP X43-420:2011 Émissions de sources fixes - Assurance qualité des PEMS (Système prédictif de suivi des émissions atmosphériques)
NF X43-110*NF EN 17389:2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
NF X43-550:1999 Qualité de l'air - Émissions de sources fixes - Expression des résultats issus de mesures à l'émission des installations industrielles
NF X43-312*NF EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
NF EN ISO 11771:2011 Qualité de l'air - Détermination de la moyenne temporelle des émissions massiques et des facteurs d'émission - Approche générale
NF EN 17389:2020 Émissions de sources fixes - Procédures d'assurance qualité et de contrôle qualité applicables aux analyseurs automatiques pour la surveillance des systèmes de dépoussiérage
XP X43-362:2004 Stationary source emissions - Qualification and monitoring of AMS
NF X43-360:2004 Stationary source emissions - Quality assurance of automated measuring systems.
NF X43-360*NF EN 14181:2014 Stationary source emissions - Quality assurance of automated measuring systems
NF EN 14181:2014 Émission de sources fixes - Assurance qualité des systèmes automatiques de mesure
NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
NF X43-303:2007 Air quality-Stationary source emissions-Determination of ammonla(NH3)
NF E37-504-2:1999 Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.
NF X43-700-3*NF EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3 : performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
NF X43-309*NF EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury : automated measuring systems.
NF ISO 10396:2007 Émissions de sources fixes - Échantillonnage pour la détermination automatisée des concentrations d'émission de gaz pour des systèmes fixes de surveillance
NF X43-302:1986 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration de poussière par opacimétrie à lumière réfléchie.
NF X43-308*NF EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method
NF EN ISO 21877:2019 Émissions de sources fixes - Détermination de la concentration en masse de l'ammoniac - Méthode manuelle
XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF X43-553*NF ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems.
NF B51-272-3*NF EN 717-3:1996 Wood-based panels. Determination of formaldehyde release. Part 3 : formaldehyde release by the flask method.
NF EN 16516+A1:2020 Produits de construction : évaluation de l'émission de substances dangereuses - Détermination des émissions dans l'air intérieur
NF EN 16516/IN1:2020 Produits de construction : évaluation de l'émission de substances dangereuses - Détermination des émissions dans l'air intérieur
NF X43-308:1992 Air quality - Stationary source emissions - Determination of mercury content - Manual method
XP CEN/TS 15674:2008 Qualité de l'air - Mesures des émissions de sources fixes - Lignes directrices pour l'élaboration de méthodes normalisées
NF EN 17656:2022 Émissions de sources fixes - Exigences relatives aux programmes d'essais d'aptitude destinés aux mesurages des émissions
NF X43-329:2003 Émissions de sources fixes - Prélèvement et mesurage d'hydrocarbures aromatiques polycycliques à l'émission
NF X43-372:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method.
XP X43-113*XP CEN/TS 17286:2019 Stationary source emissions - Mercury monitoring using sorbent traps
NF EN 13284-2:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 2 : assurance qualité des systèmes de mesurage automatisés
XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
XP CEN/TS 17286:2019 Émissions de sources fixes - Surveillance du mercure à l'aide de pièges adsorbants
NF R10-019*NF ISO 3930:2001 Instruments for measuring vehicle exhaust emissions
XP X43-378*XP CEN/TS 15674:2008 Air Quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
NF X44-052:2002 Émissions de sources fixes - Détermination de fortes concentrations massiques de poussières - Méthode gravimétrique manuelle
NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
BP X43-555:2012 Émissions de sources fixes - Guide de bonnes pratiques pour le mesurage des émissions diffuses dans le secteur de la pétrochimie
NF C19-112*NF EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters.
NF X43-551/A1:2023 Qualité de l'air - Emissions de sources fixes - Exigences spécifiques de mesurage (ressources, processus de mise en oeuvre, rapportage)
NF X43-551:2021 Qualité de l'air - Emissions de sources fixes - Exigences spécifiques de mesurage (ressources, processus de mise en oeuvre, rapportage)
NF E09-081-2/IN1*NF EN 1093-2/IN1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2 : tracer gas method for the measurement of the emission rate of a given pollutant

British Standards Institution (BSI), Quality Monitoring Emissions

BS PD CEN/TS 17198:2018 Stationary source emissions. Predictive Emission Monitoring Systems (PEMS). Applicability, execution and quality assurance
BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
BS EN 17389:2020 Stationary source emissions. Quality assurance and quality control procedures for automated dust arrestment plant monitors
BS EN ISO 11771:2011 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
19/30386014 DC BS EN 17389. Stationary source emissions. Quality assurance and quality control procedures for automated dust arrestment plant monitors
BS ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
BS EN 15267-3:2007 Air quality - Certification of automated measuring systems - Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
BS EN 15267-3:2008 Air quality - Certification of automated measuring systems - Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
BS ISO 20181:2023 Stationary source emissions. Quality assurance of automated measuring systems
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
22/30454084 DC BS EN 15267-3. Air quality. Assessment of air quality monitoring equipment. - Part 3. Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources
BS EN ISO 18854:2015 Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
BS EN 14884:2005 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
BS EN 14884:2005(2010) Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
21/30427641 DC BS ISO 20181. Stationary source emissions. Quality assurance of automated measuring systems
BS EN 17656:2022 Stationary source emissions. Requirements on proficiency testing schemes for emission measurements
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
BS EN 16516:2017+A1:2020 Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air
22/30454087 DC BS EN 15267-4. Air quality. Assessment of air quality monitoring equipment. - Part 4. Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources
BS DD CEN/TS 15675:2007 Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
DD CEN/TS 15675:2007 Air quality — Measurement of stationary source emissions — Application of EN ISO/IEC 17025:2005 to periodic measurements
BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
BS PD IEC/TR 62921:2015 Quantification methodology for greenhouse gas emissions for computers and monitors
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
BS EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
21/30427433 DC BS EN 17656. Stationary source emissions. Requirements on proficiency testing schemes for emission measurements
BS DD CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DD CEN/TS 15674:2007 Air quality — Measurement of stationary source emissions — Guidelines for the elaboration of standardised methods
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS EN 1093-2:2006 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given pollutant
BS EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given pollutant
BS EN 1093-3+A1:2007 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the emission rate of a given pollutant
BS EN 1093-3:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant
BS ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
BS 6069 Sec.4.2:1991 Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement

European Committee for Standardization (CEN), Quality Monitoring Emissions

CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
PD CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability@ execution and quality assurance
EN 14181:2014 Stationary source emissions - Quality assurance of automated measuring systems
EN 14884:2005 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
PD CEN/TS 15675:2007 Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
prEN 17656-2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
EN 17656:2022 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
PD CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
CEN/TS 17286:2019 Stationary source emissions - Mercury monitoring using sorbent traps

German Institute for Standardization, Quality Monitoring Emissions

DIN CEN/TS 17198:2018-10*DIN SPEC 33979:2018-10 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance; German version CEN/TS 17198:2018
DIN 25465:1999 Monitoring and assessment of the discharge of radioactive substances in liquid effluents
DIN CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance; German version CEN/TS 17198:2018
DIN EN 17389:2020-07 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors; German version EN 17389:2020
DIN EN 17389:2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
DIN EN 15267-3:2022-08 Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources; German and English version prEN 1...
DIN EN 14181:2015-02 Stationary source emissions - Quality assurance of automated measuring systems; German version EN 14181:2014
DIN EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; English version of DIN EN 15267-3:2008-03
DIN EN 15267-4:2022-08 Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of emissions from stationary sources; German and English version prEN 152...
DIN EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
DIN EN 16516:2020-10 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air; German version EN 16516:2017+A1:2020
DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
DIN EN 15267-3:2008-03 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; German version EN 15267-3:2007 / Note: To be replaced by DIN...
DIN CEN/TS 15675:2008 Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements; German version CEN/TS 15675:2007
DIN EN 17656:2022-12 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements; German version EN 17656:2022 / Note: Applies in conjunction with DIN EN ISO/IEC 17043 (2010-05).
DIN EN 17656:2022 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
DIN 25457-1:1993 Activity measurement methods for the release of radioactive residual materials and decommissioning components of nuclear facilities; principles for beta and gamma radiation measurements
DIN EN 17656:2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements; German and English version prEN 17656:2021
DIN EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
DIN EN 13211 Berichtigung 1:2005-06 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
DIN EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method; English version of DIN EN 14791:2006-04
DIN EN 13211:2001-06 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods; German version CEN/TS 15674:2007
DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
DIN EN 15445:2008 Fugitive and diffuse emissions of common concern to industry sectors - Qualification of fugitive dust sources by Reverse Dispersion Modelling; English version of DIN EN 15445:2008-04
DIN EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters (IEC 60861:2006, modified); German version EN 60861:2008
DIN CEN/TS 17286:2019-07*DIN SPEC 33980:2019-07 Stationary source emissions - Mercury monitoring using sorbent traps; German version CEN/TS 17286:2019
DIN EN 1093-3:2007 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant; German version EN 1093-3:2006

US-FCR, Quality Monitoring Emissions

FCR 40 CFR PART 75-2014 CONTINUOUS EMISSION MONITORING
FCR 40 CFR PART 75-2013 CONTINUOUS EMISSION MONITORING
FCR 40 CFR PART 58-2014 AMBIENT AIR QUALITY SURVEILLANCE
FCR 40 CFR PART 58-2015 AMBIENT AIR QUALITY SURVEILLANCE
FCR 40 CFR PART 58-2013 AMBIENT AIR QUALITY SURVEILLANCE

U.S. Environmental Protection Agency (U.S. EPA), Quality Monitoring Emissions

EPA 40 CFR PART 75-2010 CONTINUOUS EMISSION MONITORING
EPA 40 CFR PART 58-2010 AMBIENT AIR QUALITY SURVEILLANCE

GB-REG, Quality Monitoring Emissions

REG 40 CFR PART 75-2011 CONTINUOUS EMISSION MONITORING
REG 40 CFR PART 58-2011 AMBIENT AIR QUALITY SURVEILLANCE

Professional Standard - Agriculture, Quality Monitoring Emissions

空气和废气监测分析方法 5.5.7-2003 Part Five Pollution Source Monitoring Chapter Five Continuous Monitoring of Flue Gas Pollutant Emission Seven Calculation of Emission Concentration and Total Emission
空气和废气监测分析方法 5.5.8-2003 Part V Monitoring of Pollution Sources Chapter V Continuous Monitoring of Flue Gas Pollutant Discharge VIII Quality Assurance and Quality Control
空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions
空气和废气监测分析方法 5.5.1-2003 Part Five Monitoring of Pollution Sources Chapter Five Continuous Monitoring of Flue Gas Pollutant Discharge - An Overview
空气和废气监测分析方法 3.4.4-2003 Part Three Air Quality Monitoring Chapter Four Air Quality Continuous Automatic Monitoring System (B) Four Air Quality Continuous Automatic Monitoring System Quality Assurance and Quality Control
空气和废气监测分析方法 5.5.4-2003 Part Five Pollution Source Monitoring Chapter Five Continuous Monitoring of Flue Gas Pollutant Emission Four Determination of Smoke and Dust
空气和废气监测分析方法 5.5.2-2003 Part Five Pollution Source Monitoring Chapter Five Continuous Monitoring of Flue Gas Pollutant Discharge II Installation Requirements

RU-GOST R, Quality Monitoring Emissions

GOST R ISO 11771-2016 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
GOST R ISO 10396-2012 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
GOST R 56717-2015 Air quality. Stationary source emission. Guidelines for the elaboration of methods of measurement
GOST R ISO 10155-2006 Stationary source emissions. Automated monitoring of mass concentrations of solid particles. Performance characteristics, test methods and technical requirements
GOST ISO 8178-2-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions

CH-SNV, Quality Monitoring Emissions

SN EN 17389-2020 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors

PL-PKN, Quality Monitoring Emissions

PN-EN 17389-2020-11 E Stationary source emissions -- Quality assurance and quality control procedures for automated dust arrestment plant monitors
PN-EN 16516+A1-2020-12 E Construction products: Assessment of release of dangerous substances -- Determination of emissions into indoor air
PN-EN 17416-2021-08 E Glass in building -- Assessment of release of dangerous substances -- Determination of emissions into indoor air from glass products

ES-UNE, Quality Monitoring Emissions

UNE-EN 17389:2021 Stationary source emissions - Quality assurance and quality control procedures for automated dust arrestment plant monitors
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 16516:2018+A1:2021 Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air
UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
UNE-EN 17656:2023 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
UNE-EN 13211:2001/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems

Korean Agency for Technology and Standards (KATS), Quality Monitoring Emissions

KS I ISO 11771-2013(2018) Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS I ISO 11771:2013 Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS I ISO 10849:2008 Stationary source emissions－Determination of the mass concentration of nitrogen oxides－Performance characteristics of automated measuring systems
KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS I ISO 10155:2008 Stationary source emissions-Automated monitoring of mass concentrations of particles-Performance characteristics, test methods and specifications
KS I ISO 10155-2008(2018) Stationary source emissions－Automated monitoring of mass concentrations of particles－Performance characteristics, test methods and specifications
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS B 6302-2001 Measurement methods of pump discharge
KS B 6302-1996 Measurement methods of pump discharge
KS B 6302-1986 Measurement methods of pump discharge
KS I ISO 10396-2009(2019) Stationary source emissions－Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS I ISO 10396:2009 Stationary source emissions-Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS I ISO 10397-2006(2016) Stationary source emissions－Determination of asbestos plant emmissions(Method by fibre count measurement)
KS I ISO 10397:2006 Stationary source emissions－Determination of asbestos plant emmissions(Method by fibre count measurement)
KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS B 6352-2007(2017) Measuring methods for coefficient of discharge of safety valves

API - American Petroleum Institute, Quality Monitoring Emissions

API 4103-1971 VEHICLE EMISSIONS SURVEILLANCE STUDY
API PUBL 342-1998 Fugitive Emissions from Equipment Leaks 1: Monitoring Manual
API PUBL 4772-2008 Measuring Particulate Emissions from Combustion Sources

Professional Standard - Environmental Protection, Quality Monitoring Emissions

HJ/T 92-2002 Technical requirements for monitoring of total amount of pollutants in waste water
HJ/T 75-2001 Technical norm for continuous emissions monitoring of flue gas emitted from thermal power plants
HJ/T 55-2000 Technical guidelines for fugitive emission monitoring of air pollutants

CZ-CSN, Quality Monitoring Emissions

CSN IEC 761-2:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosol effluent monitors
CSN IEC 761-3:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 3: Specific requirements for noble gas effluent monitors
CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors
CSN IEC 761-5:1993 Equipment for continuously monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium effluent monitors
CSN IEC 761-4:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 4: Sepcific requirements for iodine monitors
CSN IEC 761-1:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 1: General requirements
CSN 17 8055-1962 Measurement of the noise emitted by computing machines
CSN 83 4501-1987 Air quality Measurement of emisslons írom the sources of air pollution Basic terms and definitions
CSN 83 4728 Cast.1-1984 Air quality. Emission measurement of ammonia from stationary sources of air pollution. General part
CSN 83 4728 Cast.4-1984 Air quality. Emission measurement of ammonia from stationary sources of air pollution. Photometric method
CSN 83 4728 Cast.3-1984 Air quality. Emission measurement of ammonia from stationary sources of air pollution. Titration method
CSN IEC 60761-2 ZZ1:2005

AT-ON, Quality Monitoring Emissions

ONORM M 9410-1991 Air quality; measuring technique; definitions and characteristics for continuous emission and ambient air monitoring instruments
ONORM M 9415 Teil.2-1991 Measuring technique — Measurement ofthe emission of substances into the atmosphere — Regulations for measuring
ONORM M 9415 Teil.3-1991 Measuring technique — Measurement ofthe emission of substances into the atmosphere — Safety regulations
ONORM M 9415 Teil.1-1991 Measuring technique — Measurement ofthe emission of substances into the atmosphere — General requirements
OENORM EN 17656-2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
ONORM S 5024-1995 Measurement of noise emitted by railbound vehicles Mesurage du bruit emis par les vehicules circulant sur rails

International Organization for Standardization (ISO), Quality Monitoring Emissions

ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
ISO 10849:1996 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Performance characteristics of automated measuring systems
ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
ISO 20181:2023 Stationary source emissions — Quality assurance of automated measuring systems
ISO 10155:1995 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 21877:2019 Stationary source emissions— Determination of the mass concentration of ammonia — Manual method
ISO 10397:1993 Stationary source emissions; determination of asbestos plant emissions; method by fibre count measurement
ISO 15259 Air quality — Measurement of stationary source emissions — Requirements for measurement sections and sites and for the measurement objective, plan and report
ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO 8178-2:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
ISO 3182:2022 Light measuring system for smoke emission testing
ISO 8178-1:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO/TR 4227:1989 Planning of ambient air quality monitoring
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions

VN-TCVN, Quality Monitoring Emissions

TCVN 5976-1995 Stationary source emission.Determination of the mass concentration of sulfur dioxide.Performance characteristics of automated measuring methods
TCVN 6501-1999 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Performance characteristics of automated measuring systems
TCVN 6192-2010 Stationary source emmissions.Sampling for the automated determination of gas emission concentrations for permanently.installed monitoring systems
TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 7734-2007 Air quality.Emission standards for chemical fertilizer manufacturing
TCVN 7735-2007 Air quality.Emission standards for cement manufacturing
TCVN 6852-2-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
TCVN 6852-1-2008 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

SAE - SAE International, Quality Monitoring Emissions

SAE R-237-1999 Emissions and Air Quality
SAE J1003-1990 DIESEL ENGINE EMISSION MEASUREMENT PROCEDURE
SAE J1003-1984 Diesel Engine Emission Measurement Procedure
SAE J1003-1973 Diesel Engine Emission Measurement Procedure@ Recommended Practice
SAE JPF-HOR-002-2013 Engine Emissions Measurement Handbook
SAE J1003-2002 Diesel Engine Emission Measurement Procedure
SAE J254-1971 INSTRUMENTATION AND TECHNIQUES FOR EXHAUST GAS EMISSIONS MEASUREMENT
SAE J254-1984 Instrumentation and Techniques for Exhaust Gas Emissions Measurement

AENOR, Quality Monitoring Emissions

UNE 77209:1989 GASEOUS EMISSIONS. REQUERIMENTS OF CONTINUOUS MONITORING FOR THE MEASUREMENT OF OPACITY
UNE 77219:1998 STACIONARY SOURCE EMISSIONS. AUTOMATED MONITORING OF MASS CONCENTRATIONS OF PARTICLES. PERFORMANCE CHARACTERISTICS, TEST METHODS AND SPECIFICATIONS.
UNE-EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
UNE-EN 14181:2015 Stationary source emissions - Quality assurance of automated measuring systems
UNE-EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems
UNE-ISO 10396:2009 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
UNE 77220:1998 STATIONARY SOURCE EMISSIONS. DETERMINATION OF ASBESTOS PLANT EMISSIONS. METHOD BY FIBRE COUNT MEASUREMENT.
UNE-CEN/TS 15674:2009 EX Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
UNE-CEN/TS 15675:2009 EX Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.

RO-ASRO, Quality Monitoring Emissions

STAS SR CEI 761-2-1996 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 2: Specific requirements for aerosol effluent monitors.

Group Standards of the People's Republic of China, Quality Monitoring Emissions

T/ZZB 1096-2019 Continuous emission monitoring system
T/SSEA 0318-2023
T/CSTA 0049-2023
T/CICEIA /CAMS41-2022 Space-Ground-Vehicle-People integration (SGVP) - Mobile source emission monitoring system - Specifications for rapid measurement and evaluation of vehicle emissions: Remote sensing method
T/CIPR 050-2022 Technical requirements for sewage discharge testing and monitoring
T/CAEPI 3-2016 Technical Requirements for Total Pollutant Discharge Monitor
T/SDEPI 026-2022 Guidelines for Acceptance of Power Consumption Monitoring System for Exhaust Emission Units
T/ZGCERIS 0008-2019 Technical specification for assement of ruminal methane emissions of dairy cows
T/CACE 027-2021 Specification for continuous emission monitoring of NH3 in the flue gas emitted from stationary sources
T/LCAA 01-2020 Technical specifications for monitoring greenhouse gas emissions in power generation industry
T/AHEMA 20-2022 Technical Specification for On-line Monitoring of Cooking Fume
T/CACE 026-2021 Specification for continuous emission monitoring of Hg in the flue gas emitted from stationary sources
T/LCAA 02-2020 Technical specifications for monitoring greenhouse gas emissions in cement industry
T/LCAA 004-2020 Specification for monitoring of greenhouse gas emission in breeding enterprises
T/AHEMA 29-2023 Performance guidelines for fugitve emission monitoring of air pollutants
T/SDJHXH 001-2022 Coking Industry Ultra-Low Emission Assessment and Monitoring Technical Guidelines
T/SBX 077-2023 Technical specifications for greenhouse gas emission monitoring in the steel industry
T/CQSES 02-2020 Technical Specifications of the water quality and flow rate online monitoring system for urban drainage pipe network
T/SDEPI 024-2022 Technical Guidelines for the Construction of Power Consumption Monitoring System for Exhaust Gas Emission Units
T/ZS 0220-2021 Technical specification for on-line monitoring system for cooking fume emission（trail implementation）
T/LCAA 003-2020 Specification for monitoring of greenhouse gas emission in planting enterprises(organizations)
T/AHEMA 25-2022 Technical specification for operation and maintenance of online monitoring system for cooking fume emission
T/ZAEPI 005-2023 Technical specification for continuous emission monitoring system of flue gas from thermal power units
T/JSEE 019-2020 Coal-fired power plant ultra-low emission monitoring system integration technical guidelines
T/QGCML 164-2021 General technical requirements for on-line monitoring system of cooking oil fume emission
T/CNTAC 145-2023 Estimation method for the emission quantity of chemicals in dyeing and finishing industry

Japanese Industrial Standards Committee (JISC), Quality Monitoring Emissions

JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

未注明发布机构, Quality Monitoring Emissions

BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications
DIN EN 16516:2018 Construction products – assessment of the release of hazardous substances – determination of emissions into indoor air
BS EN 15267-3:2007(2008) Air quality — Certification of automated measuring systems — Part 3 : Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
DIN EN 13211 Ber-1:2005 Air quality — Emissions from stationary sources — Manual method for determining total mercury concentration
BS 3841-2:1994(1999) Determination of smoke emission from manufactured solid fuels for domestic use — Part 2 : Methods for measuring the smoke emission rate
DIN EN 1948-3:1997 Emissions from stationary sources —— Determination of mass concentration of PCDD/PCDF I Part 3: Identification and quantification
BS 6069-4.2:1991(1999) Characterization of air quality — Part 4 : Stationary source emissions — Section 4.2 Method for the determination of asbestos plant emissions by fibre count measurement

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Quality Monitoring Emissions

GB/T 18345.2-2001 Gas turbines--Exhaust gas emission--Part 2: Automated emission monitoring
GB/T 7165.5-1988 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 5:Specific requirements for tritium effluent monitors
GB/Z 41599-2022 Total mass monitoring of vehicle
GB/T 7165.4-2008 Equipment for continuous monitoring of radioactivity in gaseous effluents.Part 4:Specific requirements for radioactive iodine monitors
GB/T 8190.2-2011 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site
GB/T 8190.2-1999 Reciprocating internal combustion engines Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site
GB/T 7165.2-1988 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 2: specific requirements for aerosol effluent monitors
GB/T 8190.1-1999 Reciprocating internal combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 8190.1-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
GB 13801-1992 Limit value and determination of pollutants emission for diesel oil cremator
GB/T 7165.3-1989 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 3: Specific requirement for noble gas effluent monitors
GB/T 15097-1994 Measurement method for emission pollutants of exhaust gas of marine diesel engine
GB/T 15097-2008 Measure method for emission pollutant of exhaust gas of marine diesel engine
GB/T 15097-94 Measurement method of exhaust pollutants from marine diesel engines

Danish Standards Foundation, Quality Monitoring Emissions

DS/ISO 10155/Corr.1:2002 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/EN 14181:2004 Stationary source emissions - Quality assurance of automated measuring systems
DS/EN ISO 11771:2011 Air quality – Determination of time-averaged mass emissions and emission factors – General approach
DS/EN 14884:2006 Air quality - Stationary source emissions - Determination of total mercury - Automated Measuring Systems
DS/EN 15267-3:2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
DS/CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DS/EN 17416:2021 Glass in building – Assessment of release of dangerous substances – Determination of emissions into indoor air from glass products
DS/EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
DS/CEN/TS 15675:2008 Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
DS/ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
DS/EN 13211/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

Lithuanian Standards Office , Quality Monitoring Emissions

LST ISO 10155:2001 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
LST EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
LST EN 14181-2015 Stationary source emissions - Quality assurance of automated measuring systems
LST EN 14181-2004 Stationary source emissions - Quality assurance of automated measuring systems
LST EN 14884-2006 Air quality - Stationary source emissions - Determination of total mercury: automated measuring systems
LST EN 15267-3-2008 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
LST ISO 10155:2001/AC1:2003 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications (idt ISO 10155:1995/Cor.1:2002)
LST ISO 10397:2001 Stationary source emissions. Determination of asbestos plant emissions. Method by fibre count measurement
LST EN 14791-2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
LST EN 13211-2002 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
LST EN 13211-2002/AC-2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Quality Monitoring Emissions

CEPT T/R 01-02 E-1988 Monitoring of Emissions Where Space-Service Stations Are Involved

Association of German Mechanical Engineers, Quality Monitoring Emissions

VDI 3454 Blatt 2-2012 Emission control - Claus units - Emission measurement
VDI 3454 Blatt 2-1989 Emission control; Claus units; emission measurement
VDI 4206 Blatt 2-2015 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI 4206 Blatt 2-2011 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI 4280 Blatt 3-2003 Planning of ambient air quality measurements - Measurement strategies for the determination of air quality characteristics in the vicinity of stationary emission sources
VDI 4257 Blatt 1-2013 Bioaerosols and biological agents - Emission measurement - Planning and performing emission measurements
VDI 4206 Blatt 1-2010 Performance criteria and test procedures for measuring devices for monitoring emissions at firing installations - Measuring devices for the determination of gaseous emissions and flue gas parameters
VDI 2291-2016 Emission control - Test criteria for monitoring vapour recovery systems
VDI 3896-2015 Emission control - Preparation of biogas to natural gas quality
VDI 3862 Blatt 4-2001 Gaseous emission measurement - Mesurement of formaldehyde by the AHMT method
VDI 3862 Blatt 6-2004 Gaseous emission measurement - Measurement of formaldehyde by the acetylacetone method
VDI 3950-2006 Stationary source emissions - Quality assurance of automated measuring and electronic data evaluation systems
VDI 3488 Blatt 2-1980 Gaseous emission measurement; measurement of chlorine concentration; bromide iodide method
VDI 4208 Blatt 2-2011 Requirements on bodies for emission monitoring at small firing installations - Bodies for periodic testing of performance-tested measuring devices

Shanxi Provincial Standard of the People's Republic of China, Quality Monitoring Emissions

DB14/T 2051-2020 Technical Specifications for Quality Control of Operation and Maintenance of Continuous Monitoring System for Flue Gas Emission from Stationary Pollution Sources

Jiangsu Provincial Standard of the People's Republic of China, Quality Monitoring Emissions

DB3212/T 1125-2022 Specifications for the Construction of Carbon Emissions Online Monitoring System
DB3206/T 1022-2021 Specifications for Monitoring Radioactive Pollution of Environmental Media

KR-KS, Quality Monitoring Emissions

KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

交通运输部, Quality Monitoring Emissions

JT/T 1361-2020 Technical requirements for monitoring water pollutant emissions from ships
JT/T 1360-2020 General requirements for ship air pollutant emission monitoring

SE-SIS, Quality Monitoring Emissions

SIS SS IEC 579:1981 Nuclear instrumentation - Radioactive aerosol contamination meters and monitors
SIS SS 02 84 22-1990 Stationary source emissions — Determination of the mass concentration of hydrogen chloride — Potentiometric titration.
SIS SS 02 84 23-1991 Air Quality — Stationary source emissions — Determination of the total mass concentration ofmercury — Flameless atomic absorption methods

Professional Standard - Urban Construction, Quality Monitoring Emissions

CJ/T 252-2011 Technical requirements of the water quality and flowrate online monitoring system for urban drainage

Society of Automotive Engineers (SAE), Quality Monitoring Emissions

SAE J1003-1995 DIESEL ENGINE EMISSION MEASUREMENT PROCEDURE
SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J254-2011 Instrumentation and Techniques for Exhaust Gas Emissions measurement

CEN - European Committee for Standardization, Quality Monitoring Emissions

PD CEN/TS 17286:2019 Stationary source emissions - Mercury monitoring using sorbent traps
EN 16516:2017/PRA1:2019 Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air
EN ISO 8178-2:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site

National Metrological Technical Specifications of the People's Republic of China, Quality Monitoring Emissions

JJF(机械) 1058-2021 Calibration specification for heavy-duty vehicle remote emission monitoring system
JJF(机械)1058-2021

民政部, Quality Monitoring Emissions

MZ/T 146-2019 Technical Specifications for Continuous Monitoring of Smoke Emissions at Funeral Places

International Electrotechnical Commission (IEC), Quality Monitoring Emissions

IEC TR 62921:2015 Quantification methodology for greenhouse gas emissions for computers and monitors
IEC TR 62921:2016 Quantification methodology for greenhouse gas emissions for computers and monitors
IEC 60861:2006 Equipment for monitoring of radionuclides in liquid effluents and surface waters

国家市场监督管理总局、中国国家标准化管理委员会, Quality Monitoring Emissions

GB/T 38340-2019 Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions

ES-AENOR, Quality Monitoring Emissions

UNE 77-211-1989

American Society for Testing and Materials (ASTM), Quality Monitoring Emissions

ASTM E749/E749M-12 Standard Practice for Acoustic Emission Monitoring During Continuous Welding

American National Standards Institute （ANSI), Quality Monitoring Emissions

BS ISO 15259:2023 Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report (British Standard)

HU-MSZT, Quality Monitoring Emissions

Professional Standard - Railway, Quality Monitoring Emissions

TB/T 2324-1992 Monitoring method of radioactive material transported by railway

BELST, Quality Monitoring Emissions

STB 17.13.05-48-2020 Еnvironmental pгоtесtion and nature use. Sampling, measurments and monitoring. Ambient air. Determination of mass concentration of chlorine in emissions into the аmbient air from stationary sources

European Committee for Electrotechnical Standardization（CENELEC）, Quality Monitoring Emissions

EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters

Shandong Provincial Standard of the People's Republic of China, Quality Monitoring Emissions

DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources

Henan Provincial Standard of the People's Republic of China, Quality Monitoring Emissions

DB41/T 2199-2021 Technical specifications for continuous monitoring of ammonia emissions from stationary pollution sources

IT-UNI, Quality Monitoring Emissions

UNI 11806-2021 Air quality - Odour emissions and odour impact - Vocabulary

Indonesia Standards, Quality Monitoring Emissions

SNI 19-1666-1989 Exhaust-gases, Test methods for vanadium content
SNI 19-2965-1992 Exhaust - gases, Test method for mercury content