ZH
RU
ES

bottle mouth

bottle mouth, Total:208 items.

In the international standard classification, bottle mouth involves: Bottles. Pots. Jars, Rubber and plastics products, Beverages, Glass, Pharmaceutics, Aerosol containers, Analytical chemistry.

German Institute for Standardization, bottle mouth

• DIN 6094-7:1995 Packaging - Finishes for bottles - Part 7: Pilferprooffinishes
• DIN EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids; German version EN 15543:2008
• DIN 6094-14:1995 Packaging - Finishes for bottles - Part 14: 8 G screw-thread for bottles with internal pressure
• DIN 6094-12:1995 Packaging - Finishes for bottles - Part 12: Screw thread 7,5 R for bottles with internal pressure
• DIN 6094-3:2003 Means of packaging - Finishes - Part 3: Finish for lever stoppers
• DIN EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish; German version EN 16289:2013
• DIN EN 15543:2009 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids(includes Corrigendum AC:2008）; English version of DIN EN 15543:2009-09
• DIN EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish; German version EN 16291-2:2013
• DIN EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish; German version EN 16291-1:2013
• DIN EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005); German version EN ISO 9100-1:2005
• DIN EN 16292:2013 Glass packaging - Screw finishes - Depressed threads; German version EN 16292:2013
• DIN EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005); German version EN ISO 9100-7:2005
• DIN EN 29885:1994 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994
• DIN EN ISO 9100-3:2006 Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005); German version EN ISO 9100-3:2005
• DIN EN ISO 9100-11:2005 Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005); German version EN ISO 9100-11:2005
• DIN EN ISO 9100-14:2009 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005 + Cor. 1:2008) (includes Corrigendum AC:2009); English version of DIN EN ISO 9100-14:2009-05
• DIN EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005); German version EN ISO 9100-13:2005
• DIN EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005); German version EN ISO 9100-10:2005
• DIN EN ISO 9100-12:2005 Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005); German version EN ISO 9100-12:2005
• DIN EN 12726:2000 Packaging - Cork mouth finish with a bore diatmeter of 18,5 mm for corks and tamper evident capsules; German version EN 12726:2000
• DIN EN ISO 9100-6:2005 Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular (ISO 9100-6:2005); German version EN ISO 9100-6:2005
• DIN EN ISO 9100-9:2005 Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005); German version EN ISO 9100-9:2005
• DIN EN ISO 9100-5:2005 Glass containers - Vacuum lug finishes - Part 5 :43 and 48 regular (ISO 9100-5:2005); German version EN ISO 9100-5:2005
• DIN EN ISO 9100-8:2005 Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular (ISO 9100-8:2005); German version EN ISO 9100-8:2005

HU-MSZT, bottle mouth

• MSZ 8070/3.lap-1967
• MSZ 6444/1-1970

British Standards Institution (BSI), bottle mouth

• BS EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
• BS EN 16289:2013 Glass packaging. Screw finishes for pressure capsules. MCA 7,5 RF finish
• BS EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - General
• BS ISO 9100:1995 Wide-mouth glass containers. Vacuum lug finishes. Dimensions
• BS EN ISO 9100-2:2006 Glass containers - Vacuum lug finishes - 33 medium
• BS EN ISO 9100-4:2006 Glass containers - Vacuum lug finishes - 38 medium
• BS EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - 33 medium
• BS EN ISO 9100-4:2005 Glass containers - Vacuum lug finishes - 38 medium
• BS ISO 12821:2013 Glass packaging. 26 H 180 crown finish. Dimensions
• BS EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - 58 deep
• BS ISO 12822:2015 Glass packaging. 26 H 126 crown finish. Dimensions
• BS EN ISO 12822:2020 Tracked Changes. Glass packaging. 26 H 126 crown finish. Dimensions
• BS EN 14634:2010 Glass packaging.26 H 180 crown finish.Dimensions
• BS EN ISO 9100-3:2006 Glass containers - Vacuum lug finishes - 38 regular
• BS EN 14634:2006 Glass packaging - 26 H 180 crown finish - Dimensions
• BS EN 14635:2006 Glass packaging - 26 H 126 crown finish - Dimensions
• BS EN ISO 9100-14:2007 Glass containers - Vacuum lug finishes - 110 regular
• BS EN ISO 9100-3:2005 Glass containers - Vacuum lug finishes - 38 regular
• BS EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - 77 regular
• BS EN ISO 9100-11:2005 Glass containers - Vacuum lug finishes - 82 regular
• BS EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - 100 regular
• BS EN ISO 9100-14:2005 Glass containers - Vacuum lug finishes - 110 regular
• BS EN ISO 9100-12:2005 Glass containers - Vacuum lug finishes - 89 regular
• BS EN 14635:2010 Glass packaging - 26 H 126 crown finish - Dimensions
• BS EN ISO 9100-9:2005 Glass containers - Vacuum lug finishes - 63, 66 and 70 deep
• BS EN ISO 9100-5:2005 Glass containers - Vacuum lug finishes - 43 and 48 regular
• BS EN ISO 9100-6:2005 Glass containers - Vacuum lug finishes - 53 and 58 regular
• BS EN 12726:2018 Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
• BS EN 12726:2000 Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
• BS EN ISO 9100-8:2005 Glass containers - Vacuum lug finishes - 63, 66 and 70 regular
• BS EN ISO 4796-1:2001 Laboratory glassware. Bottles. Screw-neck bottles

CZ-CSN, bottle mouth

• CSN 70 3004-1981 Cork moutb f inish
• CSN ST SEV 2436-1980

Association Francaise de Normalisation, bottle mouth

• NF H35-114*NF EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids.
• NF H35-129*NF EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish
• NF H35-027:2015 Bottling industry - Port wine finish
• NF H35-027:1972 PORT WINE FINISH.
• NF H35-092:1991 Bottling industry. Wide-mouth glass containers (thead finish).
• NF H35-093:1991 Bottling industry. Wide-mouth glass containers (crimp finish).
• NF H35-127-2*NF EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: one way glass MCA 2 finish
• NF H35-127-1*NF EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1 : returnable glass MCA 2 finish
• NF H35-023:1973 BOTTLING-SCREW FINISHES FOR PRESSURE CAPSULES.
• NF H35-096:1991 Bottling industry. Glass bottles. Glass finishes, low form.
• NF H35-090:1986 Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of diameter 29 and 35 mm, special for edible oil. Dimensions.
• NF H35-131*NF EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
• NF H35-085:1991 Bottling industry. Glass bottles. Neck glass container finish 29 mm 185. Dimensions.
• NF H35-095:1991 Bottling industriy. Glass bottles. Glass crimps finish, tall form.
• NF H35-036:1984 Bottling industry. Plastic screw finish. Parfumery type. Dimensions.
• NF H35-043:1996 Bottling industry. Glass bottles. 26 H 180 crown finish. Dimensions.
• NF H35-111:1996 BOTTLING INDUSTRY. GLASS BOTTLES. 26 MILLIMETERS CROWN CORK.
• NF H35-044:1996 Bottling industry. Glass bottles. 26 H 126 crown finish. Dimensions.
• NF H35-029:1995 Bottling industry. Glass bottles. Glass crown champagne finish 26 and 29.
• NF H35-088:1991 Bottling industry. Screw neck glass container finish. Flask thread height.
• NF H35-028:1995 Bottling industry. Glass bottles. Glass champagne finish. Dimensions.
• NF H35-065:1990 Bottling industrie. Plastic screw finish for flat products.
• NF H35-080:2006 Bottling industry - Glass bottles - 26 H 126 and 26 H 180 Twist Crown Finish.
• NF H35-033:1972 SINGLE,FLAT RING FOR TRADITIONAL TYPE WINE BOTTLES.
• NF H35-050:1975 BOTTLING INDUSTRY-SCREW NECK GLASS CONTAINER,FINISH,EUROPA TYPE.
• NF H35-068:1991 Bottling industry. Glass bottles. Press-screw neck glass finish, 31.
• NF H35-098:1991 Bottling industry. Glass bottles. Flat glass finish with 29 mm groove. Dimensions.
• NF H35-100:2000 Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules.
• NF H44-009:1986 Aerosols dispensers. Glass containers. Dimensions of finish 18 mm.
• NF H44-034:1986 Aerosols dispensers. Glass containers. Dimensions of finish 11 mm.
• NF H44-032:1986 Aerosols dispensers. Glass containers. Dimensions of finish 17 mm.
• NF H44-033:1986 Aerosols dispensers. Glass containers. Dimensions of finish 13 mm.
• NF H44-010:1986 Aerosols dispensers. Glass containers. Dimensions of finish 20 mm.
• NF H35-032:1972 Plastic finishes, 26 and 29 for crown cork.
• NF H35-043:2010 Glass packaging - 26 H 180 crown finish - Dimensions.
• NF H35-044:2010 Glass packaging - 26 H 126 crown finish - Dimensions.
• NF H35-043:2015 Glass packaging - 26 H 180 crown finish - Dimensions
• NF H35-113-1*NF EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1 : general
• NF H44-008:1986 Aerosols dispensers. Glass containers. Dimensions of finish 15 mm.
• NF H35-105-1:1993 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 1 : 38 mm nominal diameter.
• NF H35-105-3:1993 Bottling industry. Wide mouth glass containers. Vacuum finish. Part 3 : 89 mm nominal diameter.
• NF H35-105-4:1993 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 4 : 100 mm nominal diameter.
• NF H35-105-7:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 7 : 77 mm nominal diameter.
• NF H35-105-8:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 8 : 82 mm nominal diameter.
• NF H35-080:1991 Bottling industry. Glass bottles. Glass low turn-off crown finish 26 mm. Dimensions.
• NF H35-105-2:1993 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 2 : 43 mm and 48 mm nominal diameters.
• NF H35-105-5:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 5 : 53 mm and 58 mm nominal diameters.
• NF H35-113-7*NF EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7 : 58 deep
• NF H35-103:1993 Bottling industry. Glass bottles. Glass screw finishes for non carbonated products so-called "bvp". Dimensions.
• NF H35-109:1997 Bottling industry. Glass bottles. Cider, pressure type crown finish 29. Dimensions.
• NF H35-105-6:1994 Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 6 : 63 mm, 66 mm and 70 mm nominal diameters.
• NF H35-106:1997 Bottling industry. Glass bottles. Finish 29 for sparkling wine produced in a closed tank. Dimensions.
• NF H35-113-4*NF EN ISO 9100-4:2006 Glass containers - Vacuum lug finishes - Part 4 : 38 medium.
• NF H35-113-3*NF EN ISO 9100-3:2006 Glass containers - Vacuum lug finishes - Part 3 : 38 regular
• NF H35-113-14*NF EN ISO 9100-14:2005 Glass containers - Vacuum lug finishes - Part 14 : 110 regular
• NF H35-113-10*NF EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10 : 77 regular
• NF H35-113-2*NF EN ISO 9100-2:2006 Glass containers - Vacuum lug finishes - Part 2 : 33 medium
• NF H35-113-12*NF EN ISO 9100-12:2005 Glass containers - Vacuum lug finishes - Part 12 : 89 regular
• NF H35-113-11*NF EN ISO 9100-11:2005 Glass containers - Vacuum lug finishes - Part 11 : 82 regular
• NF H35-113-13*NF EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13 : 100 regular
• NF H35-106:2007 Bottling industry - Glass bottles - Finish 29 for sparkling wine produced in a closed tank - Dimensions.
• NF H35-024:1986 Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of 26-39-32-36-44 diameters. Dimensions.
• NF H35-113-9*NF EN ISO 9100-9:2005 Glass containers - Vacuum lug finishes - Part 9 : 63, 66 et 70 deep
• NF H35-113-5*NF EN ISO 9100-5:2005 Glass containers - Vacuum lug finishes - Part 5 : 43 and 48 regular
• NF H35-113-6*NF EN ISO 9100-6:2005 Glass containers - Vacuum lug finishes - Part 6 : 53 and 58 regular
• NF H44-038:1986 Aerosols dispensers. Metal containers. Dimensions of aluminium monobloc containers with finish 20 mm.
• NF H35-025:1991 Bottling industry. Glass bottles. Glass crown finish (with possibility of internal recorking) 161 high form 26. Dimensions.
• NF H35-113-8*NF EN ISO 9100-8:2005 Glass containers - Vacuum lug finishes - Part 8 : 63, 66 and 70 regular
• NF H35-071:1991 Bottling industry. Glass bottles. 38 and 43 short glass finishes for crown cork and prefabricated tear-off capsules.
• NF H35-072:1991 Bottling industry. Glass bottles. 38 and 43 high glass finishes for crown corks and prefabricated tear-off capsules.

Professional Standard - Light Industry, bottle mouth

• QB/T 3562-1999 500ml Crown Bottle Liquor Bottle
• QB/T 3729-1999 Glass containers.Crown finishes dimensions
• QB/T 1245-1991 Anti-theft cap glass bottle sealing machine

IT-UNI, bottle mouth

• UNI 6508-1969
• UNI 5882-1966 Glass bottle mouths. Flat cork (clamp) mouth.
• UNI 5300-1963

European Committee for Standardization (CEN), bottle mouth

• EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
• EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish (Incorporating corrigendum August 2014)
• EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish
• EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
• EN 16291-2:2013/AC:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
• EN ISO 12821:2019 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)
• EN ISO 12822:2020 Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)
• EN 14634:2010 Glass packaging - 26 H 180 crown finish - Dimensions
• EN 14635:2010 Glass packaging - 26 H 126 crown finish - Dimensions
• EN 12726:2000 Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and temper evident capsules
• EN ISO 12821:2015 Glass packaging - 26 H 180 crown finish - Dimensions
• EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7@5 RF finish
• EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10: 77 regular
• EN ISO 9100-14:2005 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005)
• EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13: 100 regular
• EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: General
• EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005)
• EN ISO 9100-4:2005 Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)
• EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep

RO-ASRO, bottle mouth

• STAS 6337-1974 Glass bottles with cork closure BOTTLE MOUTH Dimensions
• STAS 4887-1986 Glass packages Bottles for enclosing by capsule MOUTH OF BOTTLE Shapes and dimen&ions
• STAS 10182-1982 Glass bottles for threaded cap clousure BOTTLE MOUTH Shape and dimensions
• STAS 7726-1985 Glass packings Jars for sterilized preserves MOUTH OF JAR Shapes and dimensions

Professional Standard - Agriculture, bottle mouth

• GB 10809-1989 Glass container crown neck size

Group Standards of the People's Republic of China, bottle mouth

• T/TPCX 003-2021 Wine bottle outer packaging rubber cap
• T/CFCA 0022-2021 General requirements for liquor bottle mouth design
• T/NAIA 0189-2023 Bottle top dispenser evaluation test specification

KE-KEBS, bottle mouth

• KS 03-353-1985 KENYA STANDARD SPECIFICATION FOR CROWN FINISH GLASS BOTTLES

NL-NEN, bottle mouth

• NEN 3202-1962 Narrow-necked glass bottles with crown -cork finish suitable to sterilization
• NEN 2640-1968 Wide-necked glass bottles with capsule or crown-cork finish suitable to milk and milkproducts
• NEN-ISO 8362-2:1993 Injection containers for injectables and accessories. Part 2: Closures for injection vials (ISO 8362-2:1988)

国家市场监督管理总局、中国国家标准化管理委员会, bottle mouth

• GB/T 37856-2019 Glass containers—Dimensions for 26H180 crown finish
• GB/T 37855-2019 Glass containers—Dimensions for 26H126 crown finish
• GB/T 37869.1-2019 Glass containers—Vacuum lug finishes—Part 1:General
• GB/T 37869.14-2019 Glass containers—Vacuum lug finishes—Part 14:8 leads 110 regular
• GB/T 37869.10-2019 Glass containers—Vacuum lug finishes—Part 10: 6 leads 77 regular
• GB/T 37869.3-2019 Glass containers—Vacuum lug finishes—Part 3: 3 leads 38 regular
• GB/T 37869.2-2019 Glass containers—Vacuum lug finishes—Part 2: 3 leads 33 medium
• GB/T 37869.7-2019 Glass containers—Vacuum lug finishes—Part 7: 4 leads 58 deep
• GB/T 37869.13-2019 Glass containers—Vacuum lug finishes—Part 13: 6 leads 100 regular
• GB/T 37869.11-2019 Glass containers—Vacuum lug finishes—Part 11:6 leads 82 regular
• GB/T 37869.12-2019 Glass containers—Vacuum lug finishes—Part 12: 6 leads 89 regular
• GB/T 37869.4-2019 Glass containers—Vacuum lug finishes—Part 4: 3 leads 38 medium

TR-TSE, bottle mouth

• TS 3258-1978 SHAPES AND DIMENSIONS OF GLASS CONTAINER FINISHES

International Organization for Standardization (ISO), bottle mouth

• ISO 8162:1985 Glass containers; Tall crown finishes; Dimensions
• ISO 8163:1985 Glass containers; Shallow crown finishes; Dimensions
• ISO 9056:1990 Glass containers; series of pilferproof finish; dimensions
• ISO 9100:1992 Wide-mouth glass containers; vacuum lug finishes; dimensions
• ISO 12822:2015 Glass packaging - 26 H 126 crown finish - Dimensions
• ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: General
• ISO 9057:1991 Glass containers; 28 mm tamper-evident finish for pressurized liquids; dimensions
• ISO 9100-4:2005 Glass containers - Vacuum lug finishes - Part 4: 38 medium
• ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium
• ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep
• ISO 9100-14:2005 Glass containers - Vacuum lug finishes - Part 14: 110 regular
• ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10: 77 regular
• ISO 9100-11:2005 Glass containers - Vacuum lug finishes - Part 11: 82 regular
• ISO 9100-12:2005 Glass containers - Vacuum lug finishes - Part 12: 89 regular
• ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13: 100 regular
• ISO 9100-3:2005 Glass containers - Vacuum lug finishes - Part 3: 38 regular
• ISO 9057:1991/cor 1:2006 Glass containers - 28 mm tamper-evident finish for pressurized liquids - Dimensions; Technical Corrigendum 1
• ISO 9100-5:2005 Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular
• ISO 9100-6:2005 Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular
• ISO 9100-9:2005 Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep
• ISO 9100-8:2005 Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular

Professional Standard - Machinery, bottle mouth

• JB/T 20066-2014 Easy-folding plastic-bottle oral liquid filling&sealing machine
• JB/T 20066-2005 Easy-folding plastic-bottle oral liquid filling & sealing machine
• JB/T 20114.4-2009 Syrup filling compact line.Sealing machien

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, bottle mouth

• GB/T 17449-1998 Packaging--Glass containers--Thread finish dimensions

Professional Standard-Packaging, bottle mouth

• BB/T 0071-2017 Packaging glass container cassette bottle size

CEN - European Committee for Standardization, bottle mouth

• EN 14635:2004 Glass packaging - 26 H 126 crown finish - Dimensions
• EN 14634:2004 Glass packaging - 26 H 180 crown finish - Dimensions
• EN 12726:2018 Packaging - Cork mouth finish with a bore diameter of 18@5 mm for corks and tamper evident capsules

Others:   bottle dispenser, bottle mouth, plastic bottle thread, bottle dispenser, Vacuum Flange Bottle Neck, plastic bottle thread, bottle mouth, Standard neck, Standard neck, Bottle equipment, Micro bottle size, Glass Bottle Top Dispenser, bottle thread, Bottle Top Dispenser Micro, bottle thread, glass bottle screw neck, glass bottle mouth.