ZH
RU
ES

Carbon 8-post and 18-post

Carbon 8-post and 18-post, Total:170 items.

In the international standard classification, Carbon 8-post and 18-post involves: Products of the chemical industry, Fasteners, Fasteners for aerospace construction, Iron and steel products, Rotating machinery, Cutting tools, Protection of and in buildings, Natural gas, Resistors, Shipbuilding and marine structures in general, Equipment for petroleum and natural gas industries, Shafts and couplings, Internal combustion engines for road vehicles, Refractories, Fibre optic communications, Glass.

Association Francaise de Normalisation, Carbon 8-post and 18-post

NF T75-404:1986 Oil of eucalyptus {globulus}. Determination of 1,8-cineol content. Gas chromatographic method on packed and capillary column.
NF M08-019:1996 Refrigerated light hydrocarbon fluids. Calibration of membrane tanks and independent prismatic tanks in ships. Physical measurement.
NF ISO 3364:2017 Plaquettes amovibles en métaux-durs (carbures métalliques) avec arrondi de pointe et trou de fixation cylindrique - Dimensions
NF T75-402:1986 Oils of spike, lavender, lavandin, rosemary. Determination of 1,8-cineole and camphor . Gas chromatographic method on capillary column.
NF EN 61755-3-8:2009 Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces optiques de connecteurs pour fibres optiques - Partie 3-8 : interfaces optiques, férules composites cylindriques APC-angle de 8 degrés, de diamètre 2,5 mm et 1,25 mm...
NF ISO 15169:2004 Pétrole et produits pétroliers liquides - Détermination du volume, de la masse volumique et de la masse d'hydrocarbures contenus dans les réservoirs cylindriques verticaux à l'aide de systèmes hybrides de mesurage
NF EN ISO 898-1:2013 Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié - Partie 1 : vis, goujons et tiges filetées de classes de qualité spécifiées - Filetages à pas gros et filetages à pas fin
NF C93-919-3-2*NF EN 61755-3-2:2009 Fibre optic connector optical interfaces - Part 3-2 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
NF C93-919-3-8*NF EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materi
NF X20-510-6*NF EN ISO 6974-6:2005 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6 : determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns.

AIA/NAS - Aerospace Industries Association of America Inc., Carbon 8-post and 18-post

NAS18-1950 Panel - Connector Electrical@ for #8 and #10 Posts (Rev 3)
NASM24149/1-2000 Stud@ Welding@ and Arc Shields (Ferrules); Type I@ Class 1@ 2@ 3@ and Type II@ Class 1@ 4@ 5@ 5A@ 6@ Carbon Steel@ for Direct Energy Arc Welding
NASM24149/1-2001 Stud@ Welding@ and Arc Shields (Ferrules); Type I@ Class 1@ 2@ 3@ and Type II@ Class 1@ 4@ 5@ 5A@ 6@ Carbon Steel@ for Direct Energy Arc Welding (Rev 1)

Society of Automotive Engineers (SAE), Carbon 8-post and 18-post

SAE AS3321F-2020 STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .3125-18 UNJC X .3125-24 UNJF
SAE AS150801B THRU AS151100B-2012 Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
SAE AS152901 THRU AS153200A-2006 (R) STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A FSC 5307

American Society for Testing and Materials (ASTM), Carbon 8-post and 18-post

ASTM A307-97 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth
ASTM A307-04e1 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A307-07 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A307-07a Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A307-04 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A307-07b Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A307-21 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM A307-14e1 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM A307-10 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM F2328-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM A307-12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM A307-14 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM F2328M-05 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
ASTM F2328-05 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F2328-04 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F2328-05(2011) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F2328-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM F2328M-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
ASTM F2328M-07(2013) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs lpar;Metricrpar;
ASTM F2328M-04 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
ASTM F2328M-06 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
ASTM F2328M-07 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
ASTM F2328-14 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM F2328M-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
ASTM F2328M-07(2014) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs 40;Metric41;
ASTM F2328M-14 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts 40;Metric41;
ASTM UOP670-68 Carbon Structure of C7 and Lower Boiling Hydrocarbons in Olefinic Samples by Hydrogenation and Capillary Column Gas Chromatography
ASTM F2437-06 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F2437-12 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F2437-11 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F2437-14 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F2437/F2437M-17 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM C1351M-96(2017) Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pa·s and 10⁸ Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]

Standard Association of Australia （SAA）, Carbon 8-post and 18-post

AS 4291.1:2000 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs
AS 4291.1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel, Part 1: Bolts, screws and studs

American Society of Mechanical Engineers (ASME), Carbon 8-post and 18-post

ASME SEC II A SA-307-2002 Specification for Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength ASTM A307-00

British Standards Institution (BSI), Carbon 8-post and 18-post

BS EN ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs
NA to BS EN 1998-6-2005 UK National Annex to Eurocode 8. Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
BS EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread (ISO 898-1:2009)
BS EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
BS 1902-5.8:1992 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal conductivity (split column method) (method 1902-508)
BS EN ISO 6974-3:2000 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
BS 1902 Sec.5.8:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (split column method) (method 1902-508)
BS 4193-3:1997 Hardmetal insert tooling - Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole
BS EN 61755-3-2:2010 Fibre optic connector optical interfaces. Optical interface, 2, 5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
BS EN 61755-3-2:2009 Fibre optic connector optical interfaces - Optical interface, 2, 5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
14/30297554 DC BS EN 61755-3-8. Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Part 3-8: Optical interface, connectors with 2,5 mm and 1,25 mm diameter cylindrical for 8 degrees angled polished composite ferrule ...
BS EN ISO 6974-6:2002 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
BS EN ISO 6974-6:2008 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
BS EN ISO 6974-4:2000 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
BS EN 61755-3-1:2010 Fibre optic connector optical interfaces. Optical interface, 2, 5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
BS EN 61755-3-1:2009 Fibre optic connector optical interfaces - Optical interface, 2, 5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
BS EN ISO 6974-5:2001 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
21/30433151 DC BS EN IEC 61755-3-8. Fibre optic interconnecting devices and passive components. Connector optical interfaces. Part 3-8. Connector parameters of non-dispersion shifted single mode physically contacting fibres. Angled 2,5 mm and 1,25 mm diameter cylindr...
BS EN ISO 6974-4:2001 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns

SAE - SAE International, Carbon 8-post and 18-post

SAE AS152901 THRU AS153200B-2016 (R) STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A FSC 5307

Indonesia Standards, Carbon 8-post and 18-post

SNI 04-0918.8-2001 Rotating electrical machines. Part 8: Terminal markings and direction of rotating machines

CZ-CSN, Carbon 8-post and 18-post

CSN 35 0000-8 ZZ1-1999

European Committee for Standardization (CEN), Carbon 8-post and 18-post

EN 40-3-2:2000 Lighting Columns - Part 3-2: Design and Verification - Verification by Testing Supersedes EN 40-8: 1982
EN ISO 898-1:2013/AC:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)
EN ISO 898-1:1999 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs ISO 898-1:1999; Supersedes EN 20898-1: 1991
EN ISO 6974-3:2018 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precision and bias (ISO 6974-3:2018)
EN ISO 6974-3:2001 Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 3: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide and Hydrocarbons up to C8 Using Two Packed Columns
EN ISO 6974-5:2001 Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory and On-Line Process Application Using Three Columns

International Organization for Standardization (ISO), Carbon 8-post and 18-post

ISO 3364:1997 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions
ISO 3364:2011 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions
ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs
ISO 6974-3:2000 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C<(Index)8> using two packed columns
ISO 6974-5:2000 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line process application usi
ISO 6974-6:2002 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C<(Index)1> to C<(Index)8> hydrocarbons using three capillary columns
KS I ISO 6974-4:2006 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 4:Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
ISO 6974-4:2000 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxyde and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line measuring system using
ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 898-1:2013/Cor 1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread; Technical Corrigendum 1

Japanese Industrial Standards Committee (JISC), Carbon 8-post and 18-post

JIS B 1051:2000 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs
JIS B 1051 ERRATUM 1:2001 (Erratum 1)
JIS B 1051:2014 Mechanical properties of fasteners made of carbon steel and alloy steel.Bolts, screws and studs with specified property classes.Coarse thread and fine pitch thread
JIS C 5965-3-2:2011 Fiber optic connector optical interfaces -- Part 3-2: Optical interface, 2.5 mm and 1.25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibers

German Institute for Standardization, Carbon 8-post and 18-post

DIN EN ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
DIN ISO 3364:2018 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions (ISO 3364:2017)
DIN 43675-2:1984-02 Connectors for terminal studs; flat connectors for outdoor transformer bushings; U<(Index)m> 24 and 36 kV, 5 and 8 kA
DIN EN ISO 898-1:2013-05 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013
DIN EN ISO 8311:2014-03 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods (ISO 8311:2013); German version EN ISO 8311...
DIN EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia
DIN EN 61755-3-8:2009-09 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding mate...
DIN EN 61755-3-8:2014-06 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, connectors with 2,5 mm and 1,25 mm diameter cylindrical for 8 degrees angled polished composite ferrule using titanium ...
DIN EN 61755-3-2:2009 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres (IEC 61755-3-2:2006, modified + Corrigendum 2009); German version EN 61755-3-
DIN EN ISO 6974-3:2002 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C<(Index)8> using two packed columns (ISO 6974-3:2000); German v
DIN EN 61755-3-8:2014 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, connectors with 2,5 mm and 1,25 mm diameter cylindrical for 8 degrees angled polished composite ferrule using titanium as
DIN EN 61755-3-2:2009-08 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres (IEC 61755-3-2:2006, modified + Corrigendum 2009); German version EN 61755...
DIN EN ISO 6974-6:2005 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C<(Index)1> to C<(Index)8> hydrocarbons using three capillary columns (ISO 6974-6:2

IN-BIS, Carbon 8-post and 18-post

IS 803-1976

ESDU - Engineering Sciences Data Unit, Carbon 8-post and 18-post

DWN 10020-2012 Dynamic characteristics of cylindrical helical springs. Part 4: examples and computer program (Issue 8)
ESDU 13008-2010 Fatigue strength of low-carbon steel stud threads under axial and combined axial and bending loading

Korean Agency for Technology and Standards (KATS), Carbon 8-post and 18-post

KS C 6054-2001 FIXED CARBON FILM CHIP CYLINDRICAL TYPE RESISTORS FOR USE IN ELECTRONIC EQUIPMENT (FORM 27, CHARACTERISTIC D AND G,GRADE C)
KS I ISO 6974-3:2006 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 3:Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
KS M ISO 8311:2003 Refrigerated light hydrocarbon fluids-Calibration of membrane tanks and independent prismatic tanks in ships-Physical measurement
KS M ISO 8311:2013 Refrigerated light hydrocarbon fluids－Calibration of membrane tanks and independent prismatic tanks in ships－Physical measurement
KS C 6054-1992(1997) FIXED CARBON FILM CHIP CYLINDRICAL TYPE RESISTORS FOR USE IN ELECTRONIC EQUIPMENT (FORM 27, CHARACTERISTIC D AND G,GRADE C)
KS R ISO 3539:2002 Road vehicles-Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
KS R ISO 3539:2014 Road vehicles — Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
KS I ISO 6974-5:2006 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 5:Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons fora laboratory and on-line process application using three columns
KS I ISO 6974-5:2015 Natural gas — Determination of composition and associated uncertainty by gas chromatography —Part 5: Isothermal method for nitrogen, carbon dioxide,C1 to C5 hydrocarbons and C6＋ hydrocarbons,
KS I ISO 6974-6:2008 Natural gas－Determination of composition with defined uncertainty by gas chromatography－Part 6：Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
KS I ISO 6974-4-2006(2016) Natural gas－Determination of composition with defined uncertainty by gas chromatography－Part 4：Determination of nitrogen, carbon dioxide and C1 to C5 and C6＋ hydrocarbons for a laboratory and on-line
KS I ISO 6974-4-2006(2021) Natural gas－Determination of composition with defined uncertainty by gas chromatography－Part 4：Determination of nitrogen, carbon dioxide and C1 to C5 and C6＋ hydrocarbons for a laboratory and on-line
KS I ISO 6974-3-2006(2016) Natural gas－Determination of composition with defined uncertainty by gas chromatography－Part 3：Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two p

RU-GOST R, Carbon 8-post and 18-post

GOST ISO 15917-2015 Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials. Dimensions
GOST 31371.3-2008 Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 3. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
GOST R ISO 898-1-2011 Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
GOST ISO 898-1-2014 Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse and fine pitch thread
GOST 31371.6-2008 Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 6. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
GOST 31371.5-2008 Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 5. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns

CEN - European Committee for Standardization, Carbon 8-post and 18-post

EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts@ screws and studs with specified property classes - Coarse thread and fine pitch thread
EN ISO 6974-6:2005 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen@ helium@ oxygen@ nitrogen@ carbon dioxide and C1 to C8 hydrocarbons using three capillary columns

ZA-SANS, Carbon 8-post and 18-post

SANS 1700-17-8:1998 Fasteners Part 17: Pins Section 8: Parallel pins with internal thread, of hardened steel and martensitic stainless steel
SANS 1700-5-8:2003 Fasteners Part 5: General requirements and mechanical properties Section 8: Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Carbon 8-post and 18-post

GB/T 3478.8-2008 Straight cylindrical involute splines.Metric module,side fit.Part 8:45°pressure angle M and W values
GB/T 27894.3-2011 Natrual gas.Determination of composition with defined uncertainty by gas chromatography.Part 3:Determination of hydrogen,helium,oxyen,nitrogen,carbon dioxide and hydrocarbons up to C using two packed columns

Aerospace Industries Association, Carbon 8-post and 18-post

AIA NAS 18-1950 (Inactive)Panel - Connector Electrical, for 8 and 10 Posts Superseded - January 1950 (Use AN3435) (Rev. 3)
AIA NAS 19-1950 (Inactive)Panel - Connector, Electrical, for 1/4, 5/16 & 3/8 Posts Superseded - January 1950 (Use AN3435) (Rev. 3)

European Association of Aerospace Industries, Carbon 8-post and 18-post

AECMA PREN 2995-004-1997 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Current 1 A to 25 A Part 004: With Signal Contact and Unified Mounting Hardware Centre-to-Centre Distance of Terminals 18 mm Product Standard Edition P 1
AECMA PREN 2995-004-1999 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Current 1 A to 25 A Part 004: With Signal Contact and Unified Mounting Hardware Centre-to-Centre Distance of Terminals 18 mm Product Standard Edition P 2
AECMA PREN 2995-005-1997 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Current 1 A to 25 A Part 005: With Polarized Signal Contact and Unified Mounting Hardware Centre-to-Centre Distance of Terminals 18 mm Product Standard Edition P 1

KR-KS, Carbon 8-post and 18-post

KS I ISO 6974-4-2022 Natural gas Determination of composition with defined uncertainty by gas chromatography Part 4: Determination of nitrogen, carbon dioxide and C 1 to C 5 and C 6+ hydrocarbons for a laboratory and on l

Danish Standards Foundation, Carbon 8-post and 18-post

DS/EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
DS/EN ISO 6974-4:2001 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
DS/EN ISO 6974-3:2001 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
DS/EN ISO 6974-6+Corr.1:2006 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
DS/EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia
DS/EN ISO 6974-5:2001 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
DS/EN 61755-3-2:2009 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres

ES-UNE, Carbon 8-post and 18-post

UNE-EN ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods (ISO 8311:2013) (Endorsed by AENOR in Febru...
UNE-EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces -- Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding mat...
UNE-EN 61755-3-2:2009 Fibre optic connector optical interfaces -- Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres (Endorsed by AENOR in May of 2009.)

Lithuanian Standards Office , Carbon 8-post and 18-post

LST EN ISO 6974-5:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974-
LST EN 61755-3-8-2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia
LST EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2009)
LST EN ISO 6974-3:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000)
LST EN ISO 6974-6:2005 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)

未注明发布机构, Carbon 8-post and 18-post

BS EN ISO 6974-4:2001(2002) Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4 : Determination of nitrogen, carbon dioxide and C1 to C5 and C6 + hydrocarbons for a laboratory and on - line measuring system using two columns
BS EN ISO 6974-6:2008(2009) Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6 : Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns

CENELEC - European Committee for Electrotechnical Standardization, Carbon 8-post and 18-post

EN 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface@ 2@5 mm and 1@25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia
EN 61755-3-2:2009 Fibre optic connector optical interfaces - Part 3-2: Optical interface@ 2@5 mm and 1@25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Carbon 8-post and 18-post

PREN 3388-1988 Aerospace Series Bolts@ Screws and Studs in Heat Resisting Nickel Base Alloy NI-P100HT (Inco 718) Classification : 1275 MPa/650 Degrees Celsius Technical Specification (Issue P1; Supersede C 8)

AENOR, Carbon 8-post and 18-post

UNE-EN ISO 898-1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
UNE-EN ISO 6974-3:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns. (ISO 6974-3:2000)
UNE-EN ISO 6974-6:2006 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002)
UNE-EN ISO 6974-4:2003 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns. (ISO 6974-4:20

AWS - American Welding Society, Carbon 8-post and 18-post

NAVSEA B2.1-8-309-2018 Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Austenitic Stainless Steel (S-8)@ 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick@ MIL-3XX-XX@ in the As-Welded Condition@ Primarily Plate and Stru

API - American Petroleum Institute, Carbon 8-post and 18-post

API MPMS 12.1.1 -2019 Manual of Petroleum Measurement Standards Chapter 12.1.1 - Calculation of Static Petroleum Quantities - Upright Cylindrical Tanks and Marine Vessels EI Hydrocarbon Management HM 1 Part 1 (Fourth Edition)

International Electrotechnical Commission (IEC), Carbon 8-post and 18-post

IEC 61755-3-8:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia