PTFE

PTFE, Total:500 items.

In the international standard classification, PTFE involves: Pipeline components and pipelines, Installations in buildings, Insulating materials, Rubber and plastics products, Aerospace electric equipment and systems, Electrical wires and cables, Materials for aerospace construction, Products of the textile industry, Environmental protection, Aerospace fluid systems and components, Plastics, Construction materials, Bearings, Bridge construction, Construction industry, Coatings and related processes used in aerospace industry, Analytical chemistry, Linear and angular measurements, Components for aerospace construction.

American National Standards Institute （ANSI), PTFE

ANSI/ASTM D3295:2001 Specification for PTFE Tubing (08.03)
ANSI/ASTM D3308:2001 Specification for PTFE Resin Skived Tape (08.03)
ANSI/ASTM D3293:1991 Specification for PTFE Resin Molded Sheet (08.03)
ANSI/ASTM D4969:1997 Specification for PTFE Coated Glass Fabric (08.03)
ANSI/ASTM D6040:2001 Guide to Standard Test Methods for Unsintered Polytetrafluorethylene (PTFE) Extruded Film or Tape
ANSI/ASTM D4894:1998 Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram (08.03)
ANSI/ASTM D4895:1998 Specification for Polytetrafluoroethylene (PTFE) Resins Produced from Dispersion (08.03)
ANSI/ASTM D3297:1988 Practice for Molding and Machining Tolerances for PTFE Resin Parts (08.03)
ANSI/ASTM D6457:1999 Specification for Extruded and Compression Molded Rod and Heavy Walled Tubing Made from Polytetrafluoroethylene (PTFE)

Society of Automotive Engineers (SAE), PTFE

SAE AGS4671-2-1990 AGS4671 Ring, Locating P.T.F.E.
SAE AS9956A-2018 PACKING, PREFORMED (PTFE) - AMS3668, SEAL
SAE MA3296A-2023 CUSHION - TUBE CLAMP SUPPORT, PTFE, METRIC
SAE AS9956B-2021 Packing, Preformed (PTFE) - AMS3668, Seal
SAE MA3296-2012 CUSHION - TUBE CLAMP SUPPORT, PTFE, METRIC
SAE AS22759/1-2000 Wire, Electrical, Fluoropolymer-Insulated, PTFE and PTFE-Coated Glass, Silver-Coated Copper Conductor, 600-Volt
SAE AS22759/1-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, SILVER-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS22759/1A-2022 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, SILVER-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
SAE AS22759/2A-2022 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS22759/2-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT
SAE AMS3678/1A-2004 Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions
SAE AS85449/4-2013 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PTFE
SAE MA2151/4-2015 CLAMP, SADDLE TYPE, CUSHIONED, PTFE, METRIC
SAE AGS4670-2-1990 AGS4670 Sealed, Bonded - with P.T.F.E. Locating Ring
SAE AS85449/4A-2020 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PTFE
SAE AMS3661C-2006 Polytetrafluoroethylene (PTFE) Film Premium Grade
SAE RS-681-2-2009 RS681 Directions for Application of P.T.F.E. Impregnated Marker Tape
SAE AMS3661D-2015 Polytetrafluoroethylene (PTFE) Film Premium Grade
SAE AMS3652C-2006 Polytetrafluoroethylene (PTFE) Film Non-Critical Grade
SAE AS8942A-2022 Bearings, Plain and PTFE Lined, Self-Aligning
SAE AMS3666D-1998 Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
SAE AMS3666C-1991 POLYTETRAFLUOROETHYLENE (PTFE) SHEET, GLASS CLOTH REINFORCED
SAE ARP1785-2000 STANDARD CODES FOR SLEEVING ON PTFE HOSE ASSEMBLIES
SAE AS2078-2007 Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE AGS3812-3-1996 AGS3812 Bearing, Self-Aligning, Grooved Outer Ring, P.T.F.E. Lined, Wide
SAE AGS3815-3-1996 AGS3815 Bearing, Self-Aligning, Plain Outer Ring, P.T.F.E. Lined, Narrow
SAE AGS3814-3-1996 AGS3814 Bearing, Self-Aligning, Plain Outer Ring, P.T.F.E. Lined, Wide
SAE AGS3813-3-1996 AGS3813 Bearing, Self-Aligning, Grooved Outer Ring, P.T.F.E. Lined, Narrow
SAE AS2078A-2015 Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE AMS2491G-2022 Surface Treatment of Polytetrafluoroethylene (PTFE) Preparation for Bonding
SAE AMS3668E-2011 Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered
SAE AMS3667D-2008 (R) Polytetrafluoroethylene (PTFE) Sheet, Molded General Purpose Grade, AS Sintered
SAE AMS3668D-2010 Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered
SAE AS2078-1991 Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE AS2078A-2008 (R) Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE AMS3660D-2010 Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered
SAE AMS3668C-1994 Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered
SAE AMS3660C-2003 Polytetrafluoroethylene (PTFE) Moldings General Purpose Grade, As Sintered
SAE AMS3668C-2003 Polytetrafluoroethylene (PTFE) Moldings Premium Grade, As Sintered
SAE AMS3655C-2016 Tubing, Electrical Insulation Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3655B-1999 Tubing, Electrical Insulation Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3654C-1999 Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3655A-1991 TUBING, ELECTRICAL INSULATION Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3660E-2011 Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered
SAE AMS3669G-2012 Polytetrafluoroethylene (PTFE) Sheet, Molded, Premium Grade, As Sintered
SAE MA3399-2012 Clamp - Tube Support, Spring Clips and PTFE Cushion Procurement Specification for
SAE AS626D-2022 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 90 TO 90°, HEAVYWEIGHT
SAE AMS3678/8-2004 Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber
SAE AMS3657D-2008 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3656G-2010 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE MA2078A-2004 Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE), Metric
SAE AS622D-2022 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHT
SAE AS625D-2022 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 45 TO 90°, HEAVYWEIGHT
SAE AMS3654B-2011 TUBING, ELECTRICAL INSULATION Light Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3678/1-1999 Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions
SAE AMS3678/1A-2006 Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions
SAE AS622C-2013 HOSE ASSEMBLY, 3000 psi, PTFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHT
SAE AS624D-2022 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 45° TO 45°, HEAVYWEIGHT
SAE AS621D-2022 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
SAE AS623D-2022 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO 90°, HEAVYWEIGHT
SAE AMS3678/1B-2010 Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions
SAE AMS3678/7-2004 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
SAE AMS3656F-2008 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS3136D-1989 COATING MATERIAL, PHENOLIC RESIN PTFE Pigmented, 150°C (300°F) Cure
SAE AMS3136C-1984 COATING MATERIAL, PHENOLIC RESIN PTFE Pigmented, 150°C (300°F) Cure
SAE AMS3136B-1976 COATING MATERIAL, PHENOLIC RESIN PTFE Pigmented, 300°F (149°C) Cure
SAE AMS3653F-2016 Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3653E-1999 Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3653D-2011 TUBING, ELECTRICAL INSULATION Standard Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3657F-2011 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3667E-2011 Polytetrafluoroethylene (PTFE) Sheet, Molded, General Purpose Grade, AS Sintered
SAE AMS3657E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3678/5A-2010 Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment
SAE AMS2454-2012(R2018) Plating, Electroless Nickel, Codeposited with Polytetrafluoroethylene (PTFE)
SAE MA3399-1990 Clamp - Tube Support, Spring Clips and PTFE Cushion Procurement Specification for FSC 5340
SAE AMS2491E-2009 Surface Treatment of Polytetrafluoroethylene (PTFE), Preparation for Bonding
SAE AMS2454-2012 Plating, Electroless Nickel, Codeposited with Polytetrafluoroethylene (PTFE)
SAE ARP5448/4-2018 Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners
SAE AMS3656H-2011 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AS639-1994 Hose, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Hydraulic, 450 Degrees F
SAE AMS2516E-2013 Polytetrafluoroethylene (PTFE) Resin Coating, High Build, 698-752°F (370-400°C) Fusion
SAE AMS3136E-2005 Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150 °C (302 °F) Cure
SAE AS8791D-2020 Hydraulic and Pneumatic Retainers (Backup Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AS8791B-2009 Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AIR5693-2004 Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications
SAE AMS3678B-2006 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components
SAE AMS3678/14-2010 Type 14, 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/2-1999 Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/6-1999 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/2-2006 Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AS157E-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT
SAE AS154E-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 45°, FLARED, LIGHTWEIGHT
SAE AS156E-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 45°, FLARED, LIGHTWEIGHT
SAE AS153F-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO STRAIGHT, FLARED, LIGHTWEIGHT
SAE AS155E-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 90°, FLARED, LIGHTWEIGHT
SAE AS120D-2000 HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, 90° TO 90°, FLARELESS LIGHTWEIGHT
SAE AS158E-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT
SAE AS81914/1A-2019 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED HELICAL, POLYTETRAFLUOROETHYLENE (PTFE) STANDARD CONVOLUTIONS
SAE AS155J-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 90°, FLARED, LIGHTWEIGHT
SAE AS81914/2B-2019 TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED HELICAL, POLYTETRAFLUOROETHYLENE (PTFE) CLOSE CONVOLUTIONS
SAE AS157J-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT
SAE AS154J-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 45°, FLARED, LIGHTWEIGHT
SAE AS156J-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 45°, FLARED, LIGHTWEIGHT
SAE AS153K-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO STRAIGHT, FLARED, LIGHTWEIGHT
SAE AS158J-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT
SAE AS4897B-2015 Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for
SAE AS81914/1-2011 Tubing, Plastic, Flexible, Convoluted Helical, Polytetrafluoroethylene (PTFE) Standard Convolutions
SAE AMS2482D-2010 Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated or Codeposited
SAE AMS2515F-2011 Polytetrafluoroethylene (PTFE) Resin Coating, Low Build, 370 to 400°C (698 to 752°F) Fusion
SAE AS116F-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 45° FLARELESS, LIGHTWEIGHT
SAE AS120-1976 Hose Assembly,PTFE, CRES Braid, 3000 psig, 400°F, 90° to 90°, Flareless Lightweight
SAE AS4897-2015 Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for
SAE AMS3678/6-2006 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/5-2006 Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment
SAE AS4897A-2019 Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for
SAE AIR5693-2014 Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications
SAE AMS3678/9B-2010 Type 9, Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings
SAE AMS3659E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved
SAE AMS3678/4A-2010 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/6A-2010 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE MA2078A-1992 Test Methods, Hose Assemblies, Polytetafluoroethylene (PTFE), Metric Same as ISO 8829
SAE AMS3383-1995 Polytetrafluoroethylene (PTFE) - Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 75 - 85
SAE AMS3678/2A-2010 Type 2, 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/8A-2010 Type 8, Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber
SAE AMS2515G-2013 Polytetrafluoroethylene (PTFE) Resin Coating, Low Build, 370 to 400°C (698 to 752°F) Fusion
SAE AMS3678-1999 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components
SAE AMS2516C-2003 Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 to 400 °C (698 to 752 °F) Fusion
SAE AMS3383-2001 Polytetrafluoroethylene (PTFE) - Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 75 - 85
SAE AMS2515E-2003 Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 to 400 °C (698 to 752 °F) Fusion
SAE AMS2515D-2003 Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 to 400 °C (698 to 752 °F) Fusion
SAE AMS2516D-2003 Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 to 400 °C (698 to 752 °F) Fusion
SAE AS119H-2018 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARELESS, LIGHTWEIGHT
SAE AS120H-2018 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARELESS, LIGHTWEIGHT
SAE AS115F-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO STRAIGHT, FLARELESS, LIGHTWEIGHT
SAE AS4011-2015 HOSE ASSEMBLY, POLYETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, 90° TO 90°
SAE AS118F-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 45°, FLARELESS, LIGHTWEIGHT
SAE AS120F-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARELESS LIGHTWEIGHT
SAE AS118H-2018 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 45°, FLARELESS, LIGHTWEIGHT
SAE AS4010-2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, 45° TO 90°
SAE AS115H-2018 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO STRAIGHT, FLARELESS, LIGHTWEIGHT
SAE AS4008-2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE BEAM SEAL, STRAIGHT TO 90°
SAE AS116H-2018 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 45°, FLARELESS, LIGHTWEIGHT
SAE AS4009-2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, 45° TO 45°
SAE AS117F-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 90°, FLARELESS, LIGHTWEIGHT
SAE AS4007-2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, STRAIGHT TO 45°
SAE AS119F-2007 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARELESS LIGHTWEIGHT
SAE AS117H-2018 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 90°, FLARELESS, LIGHTWEIGHT
SAE AMS3678/4-1999 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/4-2006 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AS115K-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO STRAIGHT, FLARELESS, LIGHTWEIGHT
SAE AS119K-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45 TO 90°, FLARELESS, LIGHTWEIGHT
SAE AS120K-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARELESS, LIGHTWEIGHT
SAE AMS3659F-2011 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved
SAE AS4006-2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, STRAIGHT TO STRAIGHT
SAE AS118K-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 45°, FLARELESS, LIGHTWEIGHT
SAE AS117K-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 90°, FLARELESS, LIGHTWEIGHT
SAE AS116K-2021 HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 45°, FLARELESS, LIGHTWEIGHT
SAE MA614A-2015 Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric
SAE AS631C-2001 HOSE ASSEMBLY, 3000 psi, PTFE, FLARED, 45?TO 90? HEAVYWEIGHT FSC 4720
SAE AS81914/1A-2014 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED HELICAL, POLYTETRAFLUOROETHYLENE (PTFE) STANDARD CONVOLUTIONS
SAE MA2177A-1996 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE CRES REINFORCED, 232℃ , 10 500 kPa, BEAM SEAL, STRAIGHT TO 45° METRIC
SAE AMS2482E-2017 Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated or Codeposited
SAE AMS3678/8-2006 Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber

Group Standards of the People's Republic of China, PTFE

T/QGCML 1906-2023 Coated PTFE filter bag
T/SDMS 008-2023 PTFE acoustic compounded membrane
T/QGCML 2439-2023 High temperature resistant PTFE fiber cloth dust filter bag
T/SDAS 206-2020 Polytetrafluoroethylene (PTFE) nanocomposite film for masks
T/ZJHJ 008-2021 Polytetrafluoroethylene (PTFE) sheets for building sliding bearings
T/GITU 006-2021 Technical requirements for the new type facemasks—Part 1: PTFE filter material
T/CASME 1055-2023 PTFE reinforced wear-resistant plastic composite tube for metal mining engineering

SAE - SAE International, PTFE

SAE AS22759/2-2000 Wire@ Electrical@ Fluoropolymer-Insulated@ PTFE and PTFE-Coated Glass@ Nickel-Coated Copper Conductor@ 600-Volt (FSC 6145)
SAE AS22759/2 -2000 WIRE@ ELECTRICAL@ FLUOROPOLYMER-INSULATED@ PTFE AND PTFE-COATED GLASS@ NICKEL-COATED COPPER CONDUCTOR@ 600-VOLT
SAE AS21231-1998 Bearing@ Plain@ Self-Aligning@ TFE Lined@ Wide
SAE AS21231A-2012 BEARING@ PLAIN@ SELF-ALIGNING@ PTFE LINED@ WIDE
SAE AS22759/1A-2017 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, SILVER-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
SAE AS22759/2A-2017 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS630B-2000 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
SAE AS630A-1999 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
SAE AS629B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 90°@ HEAVYWEIGHT
SAE AS628B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
SAE AS631A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 90°@ HEAVYWEIGHT
SAE AS631B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 90°@ HEAVYWEIGHT
SAE AS623A-1999 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO 90°@ HEAVYWEIGHT
SAE AS623B-2000 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO 90°@ HEAVYWEIGHT
SAE AS629A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 90°@ HEAVYWEIGHT
SAE AS628A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
SAE AS632B-2000 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 90° TO 90°@ HEAVYWEIGHT
SAE AS632A-1999 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 90° TO 90°@ HEAVYWEIGHT
SAE AS630C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
SAE AS621C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO STRAIGHT@ HEAVYWEIGHT
SAE AS623C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARELESS@ STRAIGHT TO 90°@ HEAVYWEIGHT
SAE AS628C-2001 HOSE ASSEMBLY@ 3000 psi@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
SAE ARP1785-1981 Standard Codes for Sleeving on PTFE Hose Assemblies
SAE ARP1785A-2000 Standard Codes for Sleeving on PTFE Hose Assemblies
SAE AS629D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 90°@ HEAVYWEIGHT
SAE AS628D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO 45°@ HEAVYWEIGHT
SAE AMS3652D-2015 Polytetrafluoroethylene (PTFE) Film Non-Critical Grade
SAE AS630D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 45°@ HEAVYWEIGHT
SAE AS632D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 90° TO 90°@ HEAVYWEIGHT
SAE AS631D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ 45° TO 90°@ HEAVYWEIGHT
SAE AS627B-2000 Hose Assembly@ 3000 psi@ PTFE@ Flared@ Straight to Straight@ Heavyweight
SAE AS627A-1999 Hose Assembly@ 3000 psi@ PTFE@ Flared@ Straight to Straight@ Heavyweight
SAE AMS3666C-1985 Polytetrafluoroethylene (PTFE) Sheet@ Glass Fabric Reinforced
SAE AS627C-2001 Hose Assembly@ 3000 psi@ PTFE@ Flared@ Straight to Straight@ Heavyweight
SAE AS627D-2018 HOSE ASSEMBLY@ 3000 PSI@ PTFE@ FLARED@ STRAIGHT TO STRAIGHT@ HEAVYWEIGHT
SAE AS626B-2000 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 90 TO 90°, HEAVYWEIGHT
SAE AS626A-1999 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, 90 TO 90°, HEAVYWEIGHT
SAE AMS3669F-2010 Polytetrafluoroethylene (PTFE) Sheet@ Molded Premium Grade@ As Sintered
SAE AMS3654D-2016 Tubing@ Electrical Insulation Light Wall@ Extruded Polytetrafluoroethylene (PTFE)
SAE AS81822/5-1998 WIRE@ ELECTRICAL@ SOLDERLESS WRAP@ FLUOROCARBON POLYIMIDE TAPE AND POLYTETRAFLUOROETHYLENE (PTFE) INSULATION@ SILVER COATED SOLID CONDUCTOR
SAE AS81822/4-2004 WIRE@ ELECTRICAL@ SOLDERLESS WRAP@ POLYIMIDE COATING OVER EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION@ SILVER COATED SOLID CONDUCTOR
SAE AS81822/5A-2011 WIRE@ ELECTRICAL@ SOLDERLESS WRAP@ FLUOROCARBON POLYMIDE TAPE AND POLYTETRAFLUOROETHYLENE (PTFE) INSULATION@ SILVER COATED SOLID CONDUCTOR
SAE AMS3655D-2018 Tubing@ Electrical Insulation Thin Wall@ Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3654E-2018 Tubing@ Electrical Insulation Light Wall@ Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3050/5-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - PTFE Only
SAE AS622B-2000 HOSE ASSEMBLY, 3000 psi, PTFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHT
SAE AS621B-2000 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
SAE AS621A-1999 HOSE ASSEMBLY, 3000 PSI, PTFE, FLARELESS, STRAIGHT TO STRAIGHT, HEAVYWEIGHT
SAE AS625A-1999 Hose Assembly@ 3000 psi@ PTFE@ Flareless@ 45 Degree to 90 Degree@ Heavyweight
SAE AS625B-2000 Hose Assembly@ 3000 psi@ PTFE@ Flareless@ 45 Degree to 90 Degree@ Heavyweight
SAE AS622A-1999 HOSE ASSEMBLY, 3000 psi, PTFE, FLARELESS, STRAIGHT TO 45°, HEAVYWEIGHT
SAE AMS2454-2018 Plating@ Electroless Nickel@ Codeposited with Polytetrafluoroethylene (PTFE)
SAE AS119G-2012 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45 DEGREE TO 90 DEGREE@ FLARELESS@ LIGHTWEIGHT
SAE AS157F-2012 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45 DEGREE TO 90 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS157G-2017 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45 DEGREE TO 90 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS120G-2012 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 90 DEGREE TO 90 DEGREE@ FLARELESS@ LIGHTWEIGHT
SAE AS156F-2012 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45 DEGREE TO 45 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS158G-2017 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 90 DEGREE TO 90 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS158H-2018 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 90 DEGREE TO 90 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS157H-2018 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45 DEGREE TO 90 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS155G-2017 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI @ 400 °F@ STRAIGHT TO 90°@ FLARED@ LIGHTWEIGHT
SAE AS155H-2018 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI @ 400 °F@ STRAIGHT TO 90°@ FLARED@ LIGHTWEIGHT
SAE AS153J-2018 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO STRAIGHT@ FLARED@ LIGHTWEIGHT
SAE AS153F-2003 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO STRAIGHT@ FLARED@ LIGHTWEIGHT
SAE AS156E-2003 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45° TO 45°@ FLARED@ LIGHTWEIGHT
SAE AS625C-2001 Hose Assembly@ 3000 psi@ PTFE@ Flareless@ 45 Degree to 90 Degree@ Heavyweight
SAE AS156H-2018 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45° TO 45°@ FLARED@ LIGHTWEIGHT
SAE AS154H-2018 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO 45°@ FLARED@ LIGHTWEIGHT
SAE AS156G-2017 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ 45° TO 45°@ FLARED@ LIGHTWEIGHT
SAE AS153H-2017 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO STRAIGHT@ FLARED@ LIGHTWEIGHT
SAE AS153G-2012 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO STRAIGHT@ FLARED@ LIGHTWEIGHT
SAE AS154G-2017 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO 45°@ FLARED@ LIGHTWEIGHT
SAE AS153E-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ Straight to Straight@ Flared@ Lightweight
SAE MA2078B-2009 Test Methods@ Hose Assemblies@ Polytetrafluoroethylene (PTFE)@ Metric
SAE AMS3678/1C-2016 Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions
SAE AS624B-2000 Hose Assembly@ 3000 psi@ PTFE@ Flareless@ 45 Degree to 45 Degree@ Heavyweight
SAE AS624A-1999 Hose Assembly@ 3000 psi@ PTFE@ Flareless@ 45 Degree to 45 Degree@ Heavyweight
SAE AS632C-2001 Hose Assembly@ 3000 psi@ PTFE@ Flared@ 90 Degree to 90 Degree@ Heavyweight
SAE AS154F-2012 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO 45 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS154E-2003 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 DEGREES F@ STRAIGHT TO 45 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS158E-2003 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 DEGREES F@ 90 DEGREES TO 90 DEGREES@ FLARED@ LIGHTWEIGHT
SAE AS155F-2012 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 °F@ STRAIGHT TO 90 DEGREE@ FLARED@ LIGHTWEIGHT
SAE AS624C-2001 Hose Assembly@ 3000 psi@ PTFE@ Flareless@ 45 Degree to 45 Degree@ Heavyweight
SAE AS119E-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ 45 Degree to 90 Degree@ Flareless Lightweight
SAE AS115E-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ Straight to Straight@ Flareless@ Lightweight (FSC 4720)
SAE AS156D-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ 45 Degree to 45 Degree@ Flared@ Lightweight
SAE AS157D-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ 45 Degrees to 90 Degrees@ Flared@ Lightweight
SAE AS158D-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ 90 Degrees to 90 Degrees@ Flared@ Lightweight
SAE AS120C-2000 Hose Assembly@ PTFE@ Cres Braid@ 3000 PSIG@ 400 Degrees F@ 90 Degrees to 90 Degrees@ Flareless Lightweight
SAE AMS3653G-2018 Tubing@ Electrical Insulation Standard Wall@ Extruded Polytetrafluoroethylene (PTFE)
SAE AS8791C-2014 Hydraulic and Pneumatic Retainers (Back-Up Rings)@ Polytetrafluoroethylene (PTFE) Resin
SAE AS117E-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ Straight to 90 Degree@ Flareless@ Lightweight (FSC 4720)
SAE AS120F-2003 HOSE ASSEMBLY@ PTFE@ CRES REINFORCED@ 3000 PSI@ 400 DEGREES F@ 90 DEGREE TO 90 DEGREE@ FLARELESS LIGHTWEIGHT
SAE AS629C-2001 Hose Assembly@ 3000 psi@ PTFE@ Flared@ Straight to 90 Degree@ Heavyweight (FSC 4720)
SAE AS120E-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ 90 Degree to 90 Degree@ Flareless Lightweight
SAE AS156C-2000 Hose Assembly@ PTFE@ CRES Braid@ 3000 psig@ 400 Degrees F@ 45 Degree to 45 Degree@ Flared@ Lightweight
SAE AS116E-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ Straight to 45 Degree Flareless@ Lightweight (FSC 4720)
SAE AS8791A-2003 Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AS118E-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ 45 Degree to 45 Degree@ Flareless@ Lightweight (FSC 4720)
SAE AS81822/6-2004 WIRE@ ELECTRICAL@ SOLDERLESS WRAP@ EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION@ SILVER COATED SOLID CONDUCTOR
SAE AS22759/7-2000 Wire@ Electrical@ Fluoropolymer-Insulated@ Abrasion Resistant Extruded PTFE@ Medium Weight@ Silver-Coated Conductor@ 600 Volt
SAE AS81822/6A-2011 WIRE@ ELECTRICAL@ SOLDERLESS WRAP@ EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION@ SILVER COATED SOLID CONDUCTOR
SAE AMS3678/6B-2016 Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AS4569C-2001 Hose Assembly@ PTFE@ Aramid Reinforced@ Standard Duty@ 4000/3000 psi@ 275 Degrees F@ Titanium Fittings@ Flareless@ Straight to 45 Degree
SAE AMS3678C-2010 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled
SAE AS4570A-1994 Hose Assembly@ PTFE@ Aramid Reinforced@ Standard Duty 4000/3000 psi@ 275 Degrees F@ Titanium Fittings@ Flareless@ Straight to 90 Degree
SAE AS154D-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ Straight to 45 Degree@ Flared@ Lightweight
SAE AS155D-2001 Hose Assembly@ PTFE@ Cres Braid@ 3000 psig@ 400 Degrees F@ Straight to 90 Degree@ Flared@ Lightweight
SAE AS4569B-1994 Hose Assembly@ PTFE@ Aramid Reinforced@ Standard Duty@ 4000/3000 psi@ 275 Degrees F@ Titanium Fittings@ Flareless@ Straight to 45 Degree
SAE AS81914/2-2011 TUBING@ PLASTIC@ EXTRA FLEXIBLE@ CONVOLUTED HELICAL@ POLYTETRAFLUOROETHYLENE (PTFE) CLOSE CONVOLUTIONS
SAE AS81914/2B-2014 TUBING@ PLASTIC@ EXTRA FLEXIBLE@ CONVOLUTED HELICAL@ POLYTETRAFLUOROETHYLENE (PTFE) CLOSE CONVOLUTIONS
SAE AS81914/2A-2012 TUBING@ PLASTIC@ EXTRA FLEXIBLE@ CONVOLUTED HELICAL@ POLYTETRAFLUOROETHYLENE (PTFE) CLOSE CONVOLUTIONS
SAE AMS3678/2B-2016 Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678D-2016 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled
SAE AS4569D-2018 HOSE ASSEMBLY@ PTFE@ PARA-ARAMID REINFORCED@ STANDARD DUTY@ 3000 PSI@ 275 ?F@ TITANIUM FITTINGS@ FLARELESS@ STRAIGHT TO 45?
SAE AMS3678/14A-2016 Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AMS3678/5B-2016 Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment
SAE AMS2515H-2018 Polytetrafluoroethylene (PTFE) Resin Coating@ Low Build@ 370 to 400 °C (698 to 752 °F) Fusion
SAE AS4010-1993 HOSE ASSEMBLY@ POLYTETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ 45? TO 90?
SAE AS4011-1993 "HOSE ASSEMBLY@ POLYETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ 90° TO 90°,,"
SAE AS4008-1993 "HOSE ASSEMBLY@ POLYTETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ STRAIGHT TO 90°,,"
SAE MA614A-1998 Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric
SAE AMS2516F-2018 Polytetrafluoroethylene (PTFE) Resin Coating High Build@ 698 to 752 °F (370 to 400 °C) Fusion.
SAE AS4572A-1994 Hose Assembly@ PTFE@ Aramid Reinforced@ Standard Duty@ 4000/3000 psi@ 275 Degrees F@ Titanium Fittings@ Flareless@ 45 Degrees to 45 Degrees
SAE AS4571A-1994 Hose Assembly@ PTFE@ Aramid Reinforced@ Standard Duty@ 4000/3000 psi@ 275 Degrees F@ Titanium Fittings@ Flareless@ 45 Degree to 90 Degree
SAE AS4573A-1994 Hose Assembly@ PTFE@ Aramid Reinforced@ Standard Duty@ 4000/3000 psi@ 275 Degrees F@ Titanium Fittings@ Flareless@ 90 Degree to 90 Degree
SAE AMS3678/5-1999 Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment
SAE AMS3678/4B-2016 Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE AS4008A-2017 "HOSE ASSEMBLY@ POLYTETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ STRAIGHT TO 90°,,"
SAE AS4010A-2017 HOSE ASSEMBLY@ POLYTETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ 45? TO 90?
SAE AS4011A-2017 HOSE ASSEMBLY@ POLYETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ 90? TO 90?
SAE AMS3678/9-2004 Type 9 Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 Backup Rings
SAE AMS3678A-2004 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled Components

Defense Logistics Agency, PTFE

DLA MS28783 REV F VALID NOTICE 1-2010 Ring, Gasket, Back-up, PTFE
DLA DESC-DWG-88012 REV E-2013 CAPACITORS, FIXED, METALLIZED PTFE (TEFLON) DIELECTRIC, HERMETICALLY SEALED

AIA/NAS - Aerospace Industries Association of America Inc., PTFE

NAS1554-1994 Grommet@ PTFE-Split (Rev 2)
NAS1554-2015 GROMMET@ PTFE@ SPLIT (Rev 5)
NAS1554-2011 GROMMET@ PTFE@ SPLIT (Rev 4)
NAS1554-1997 Grommet@ PTFE-Split (Rev 3)
NASM85449/4-2019 CLAMP ASSEMBLY@ SADDLE-TYPE@ CUSHIONED@ PTFE@ 321 CRES@ -320 °F TO 450 °F@ GENERAL PURPOSE (Rev 3)
NASM85449/4-2012 CLAMP ASSEMBLY@ SADDLE-TYPE@ CUSHIONED@ PTFE@ 321 CRES@ -320 °F TO 450 °F@ GENERAL PURPOSE (Rev 2)
NASM85449/4-2011 CLAMP ASSEMBLY@ SADDLE-TYPE@ CUSHIONED@ PTFE@ 321 CRES@ -320 °F TO 450 °F@ GENERAL PURPOSE (Rev 1)

General Motors Corporation (GM), PTFE

GM 9986139-1996 Grease, PTFE Filled Synthetic
GM 9986114-1995 Grease, Polyurea, PTFE, Multi-Temperature, NLGI 2

Aerospace Industries Association/ANSI Aerospace Standards, PTFE

AIA/NAS NAS1554-2015 GROMMET, PTFE, SPLIT (Rev 5)
AIA/NAS NASM85449/4-2012 CLAMP ASSEMBLY, SADDLE-TYPE, CUSHIONED, PTFE, 321 CRES, -320 °F TO 450 °F, GENERAL PURPOSE (Rev 2)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, PTFE

GB/T 42733-2023 Extruded PTFE sleeving for electrical applications

Professional Standard - Light Industry, PTFE

QB/T 5257-2018 Polytetrafluoroethylene (PTFE) sheet

IN-BIS, PTFE

IS 9718-1981 Fixtures, Cutting, PTFE Piston Specifications
IS 9558-1980 Size, depth, PTFE (Teflon) piston size

International Federation of Trucks and Engines, PTFE

NAVISTAR MPAPS K-15-5009-2015 Polytetrafluoroethylene (PTFE) Seal Material
NAVISTAR CEMS DT-3-2001 Methods of Determining Glass and PTFE Fillers in Thermoplastic Urethane

American Welding Society (AWS), PTFE

WRC 442:1999 Polytetrafluoroethylene (PTFE) Gasket Qualification

未注明发布机构, PTFE

SAE MA2151/4-2007 CLAMP, SADDLE TYPE, CUSHIONED, PTFE, METRIC
SAE AMS2454A-2021 Plating@ Electroless Nickel@ Codeposited with Polytetrafluoroethylene (PTFE)
DIN 30654:2020-01 Sealing profiles of expanded PTFE for flanged joints in the gas supply
DIN EN 751-3:2022E Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings

Standard Association of Australia （SAA）, PTFE

AS 1272:1974 Unsintered PTFE tape for thread sealing applications

GSO, PTFE

GSO ISO 7313:2015 Aircraft -- High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
OS GSO ISO 7313:2015 Aircraft -- High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
BH GSO ISO 7313:2017 Aircraft -- High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
OS GSO EN 1337-7:2011 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
GSO ISO 13000-1:2014 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products -Part 1: Requirements and designation
BH GSO ISO 13000-1:2015 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products -Part 1: Requirements and designation
OS GSO ISO 13000-1:2014 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products -Part 1: Requirements and designation

WRC - Welding Research Council, PTFE

BULLETIN 442-1999 POLYTETRAFLUOROETHYLENE (PTFE) GASKET QUALIFICATION

SCC, PTFE

BS 4893:1973 Specification for veneered polytetrafluoroethylene (PTFE) tape
NS-EN 4166:2003 Aerospace series — Clips, spring tension, three parts — PTFE bushes
BS 5238:1975 Specification for polytetrafluoroethylene (PTFE) granular powder for moulding purposes
BS EN ISO 13000-1:2005 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products-Requirements and designation
DIN 30654:2020 Sealing profiles of expanded PTFE for flanged joints in the gas supply
BS EN ISO 13000-1:1998 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products-Requirements and designation
NS-EN 751-3:2022 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
DANSK DS/EN 751-3:2022 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes and PTFE strings
NS-EN 1337-7:2004 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings
DANSK DS/EN 1337-7:2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
NS-EN 1337-7:2000 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings
BS 5130:1974 Specification for polytetrafluoroethylene (PTFE) tube manufactured from granular powder
BS 7485:1991 Method of specifying aqueous dispersions of polytetrafluoroethylene (PTFE) materials
DIN 30654 E:2017 Draft Document - Sealing profiles of expanded PTFE for flanged joints in the gas supply
NS-EN 4166:2004 Aerospace series — Clips, spring tension, three parts — PTFE bushes
BS 5184:1975 Specification for glass fibre filled polytetrafluoroethylene (PTFE) moulding powders
AS C186:1970 Approval and test specification for polytetrafluoroethylene (PTFE) insulated flexible cords
DIN EN 1337-7 E:2018 Draft Document - Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German and English version prEN 1337-7:2018
DANSK DS/EN ISO 13000-1:2005 Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 1: Requirements and designation
BS EN ISO 13000-2:1998 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products-Preparation of test specimens and determination of properties
DANSK DS/ISO 13000-1:2021 Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 1: Requirements and designation
BS EN ISO 13000-2:2005 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products-Preparation of test specimens and determination of properties
SAE AS6996-2024 HOSE ASSEMBLY, CONVOLUTED, PTFE, METALLIC REINFORCED, LOW PRESSURE, CONDUCTIVE, FLARELESS, STRAIGHT TO STRAIGHT

(U.S.) Ford Automotive Standards, PTFE

FORD ESB-M4D169-A2-1978 ACETAL RESIN, 15% PTFE FILLED
FORD SA-M99P9100-A-1994 PTFE COATING, RESIN BONDED, PERFORMANCE
FORD ESA-M1C200-A-2004 GREASE, SILICONE, PTFE ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1C274-A-2008 GREASE, SYNTHETIC, PTFE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2L63-A-2003 NICKEL WIRE, PTFE INSULATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSL-M4D632-A-2005 POLYTETRAFLUOROETHYLENE (PTFE), SINTER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D465-A2-1988 TUBING, PTFE - POLYPHENYLENE SULFIDE FILLED Shown on ESA-M4D465-A1
FORD WSG-M1C218-B2-2010 GREASE, PTFE, LIGHT CONSISTENCY ***TO BE USED WITH FORD WSS-M99P1111-A***

ZA-SANS, PTFE

SANS 1834:2005 Unsintered polytetrafluoroethylene (PTFE) tapes for engineering applications

GM Europe, PTFE

GME STD 518868-2000 Plastic 8868 PTFE Plast 8868 PTFE English/Swedish
GME QK 000728-2012 Blends of PC and PTFE (Issue 1; English/German)
GME QK 000369-2010 Polyoxymethylene with Aramidfasern and PTFE (Issue 1; English/German)
GME STD 518839-1999 Anti-friction varnish 8839 Polyurethane bonded PTFE Glidlack 8839 Polyuretanbunden PTFE
GME QK 000654-2004 Blend of polycarbonate (PC) and polytetrafluoroethylene (PTFE) English/German
GME QK 000419-2003 Polytetrafluoroethylene resin (PTFE) with Shore hardness D.60±5 English/German

Aerospace Industries Association, PTFE

AIA NAS 1554-1997 Grommet, PTFE-Split Revision 3; FSC 5325

US-FCR, PTFE

FCR FED PS28-70-1970 GLASS STOPCOCKS WITH POLYTETRAFLUORETHYLENE (PTFE) PLUGS

American Society for Testing and Materials (ASTM), PTFE

ASTM D3369-01 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film
ASTM D4969-97 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric
ASTM D3308-12(2017) Standard Specification for PTFE Resin Skived Tape
ASTM D5675-13 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D496-74(1995) Standard specification for polytetrafluoroethylene (PTFE) coated glass cloth
ASTM D3308-12 Standard Specification for PTFE Resin Skived Tape
ASTM D4969-07 Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric
ASTM D3295-97 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
ASTM D3295-20 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
ASTM D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
ASTM D5675-13(2018) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D3295-15 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
ASTM D4969-07(2012) Standard Specification for Polytetrafluoroethylenendash;(PTFE) Coated Glass Fabric
ASTM D5675-13(2023) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D4895-18(2023) Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D4895-16 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D4895-98 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM E911-98(2004) Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM E911-98(2015) Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM D4895-15 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D4895-10 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM E911-98(2021) Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM E911-98(2009) Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM E911-98 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
ASTM D6585-17(2017) Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D4895-18 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D6585-17(2022) Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D6585-11 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D7193-11 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D4745-11ae1 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D7193-17 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D4969-17 Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
ASTM D4894-19 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM D1710-15(2021) Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
ASTM D4745-06 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4745-01 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4745-97 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D1710-02 Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing
ASTM D4894-98a Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM D4894-04 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM D6457-08 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
ASTM D1710-99 Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing

Association Francaise de Normalisation, PTFE

NF ISO 7313:1987 Aéronefs - Tuyauterie flexible, haute température, convolutée, en polytetrafluoréthylène (PTFE)
NF EN 4166:2005 Aerospace Series - Three-Piece Spring Loaded Clamps - PTFE Bushings
NF L40-050*NF ISO 7313:1987 Aircraft. High temperature convoluted hose assemblies in polytetrafluoroethylene (ptfe).
NF E29-260:1987 Industrial pipes. Pipe components with PTFE - FEP - PFA fluorocarbon resin.
NF T51-550-1:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1 : requirements and designation.
NF T51-550-1*NF EN ISO 13000-1:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1 : requirements and designation
NF EN 1337-7:2004 Appareils d'appui structuraux - Partie 7 : appareils d'appui cylindriques et sphériques comportant du PTFE
NF EN ISO 13000-1:2021 Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 1 : spécifications et désignation
NF T51-550-1:1998 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Part 1 : requirements and designation.
NF ISO 7258:1987 Polytetrafluoroethylene (PTFE) tubes for aeronautical use - Methods for determining density and density
NF E29-260:2015 Industrial pipes - Metallic pipe components internally coated with fluorocarbon resins - PTFE - FEP - PFA

工业和信息化部, PTFE

JB/T 14003-2020 Spherical bearing PTFE fabric pad type self-lubricating bearing

German Institute for Standardization, PTFE

DIN 28148:1992-01 PTFE envelope gaskets for glass lined agitator vessels
DIN EN 751-3:2022 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
DIN EN 751-3:2022-08 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings; German version EN 751-3:2022 / Note: This standard is part of the DVGW body of rules.
DIN EN 751-3:2021 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings; German and English version prEN 751-3:2021
DIN EN 751-3:2024-03 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings; German version EN 751-3:2022+A1:2023 / Note: This standard is part of the DVGW body of rules.
DIN EN 1337-7:2018 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German and English version prEN 1337-7:2018
DIN EN 1337-7:2004-08 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German version EN 1337-7:2004 / Note: To be replaced by DIN EN 1337-7 (2018-02).
DIN 65374:1989-11 Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification
DIN EN ISO 13000-1:2021-11 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021); German version EN ISO 13000-1:2021
DIN 65374:1989 Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification

British Standards Institution (BSI), PTFE

BS EN 751-3:2022+A1:2023 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Unsintered PTFE tapes and PTFE strings
BS EN 751-3:2022 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Unsintered PTFE tapes and PTFE strings
BS ISO 7313:2020 Aircraft. High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
BS EN ISO 13000-1:2021 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation
BS 7786:1995 Specification for unsintered PTFE tape - General requirements
BS EN 1337-7:2004(2006) Structural bearings — Part 7 : Spherical and cylindrical PTFE bearings
BS EN ISO 13000-1:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Requirements and designation
18/30379015 DC BS ISO 7313. Aircraft. High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
21/30407321 DC BS EN 751-3. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Part 3. Unsintered PTFE tapes and PTFE strings
BS EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties
18/30365857 DC BS EN 1337-7. Structural bearings - Part 7. Spherical and cylindrical PTFE bearings
18/30381685 DC BS EN 4878-001. Aerospace series. Polytetrafluoroethylene (PTFE). Part 001. Moulded
BS ISO 9938:2022 Aerospace. Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C/28 000 kPa. Procurement specification
BS ISO 8829-1:2009 Aerospace - Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies - Metallic (stainless steel) braid
BS EN 12560-3:2001 Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets
BS ISO 8829-2:2006 Aerospace. Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies. Non-metallic braid

International Organization for Standardization (ISO), PTFE

ISO 7313:2020 Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
ISO 8829:1990 Aerospace; polytetrafluoroethylene (PTFE) hose assemblies; test methods
ISO 7313:1984 Aircraft; High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
ISO 13000-1:1997 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation
ISO 13000-1:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation

AT-ON, PTFE

OENORM EN 751-3-2021 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings

European Committee for Standardization (CEN), PTFE

prEN 751-3-2021 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
EN 751-3:2022+A1:2023 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
EN ISO 13000-1:1997 Plastics - Polytetrafluoroethylene (PTFE) Semi-Finished Products - Part 1: Requirements and Designation ISO 13000-1:1997
EN ISO 13000-1:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)
EN ISO 13000-1:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation

ES-UNE, PTFE

UNE-EN 4708-201:2022 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
UNE-EN 751-3:2023 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
UNE-EN 4166:2004 Aerospace series - Clips, spring tension, three parts - PTFE bushes (Endorsed by AENOR in March of 2005.)
UNE-EN ISO 13000-1:2022 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)

GM North America, PTFE

GM 9986172-1999 Grease, Silicone, PTFE Fortified, NLGI No. 1 Door Lock Tumbler Mechanisms
GM GMP.PA66.008-2013 Nylon 66 - 20% PTFE Filled, Heat Stabilized (Issue 6; Do Not Use on New Programs; No Replacement)

AENOR, PTFE

UNE-EN 1337-7:2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings

Danish Standards Foundation, PTFE

DS/EN 1337-7:2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
DS/EN ISO 13000-1:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation
DS/ISO 13000-1:2021 Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 1: Requirements and designation

Lithuanian Standards Office , PTFE

LST EN 1337-7-2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings

CEN - European Committee for Standardization, PTFE

PREN 1337-7-2018 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings

SE-SIS, PTFE

SIS SS-ISO 8829:1991 Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies — Test methods
SIS SS-ISO 7313:1986 Aircraft - High temperature convoluted hose assemblies in polytetrafluoro- ethylene (PTFE)

Aerospace, Security and Defence Industries Association of Europe (ASD), PTFE

ASD-STAN PREN 4166-1994 Aerospace Series Clips, Spring Tension, Three Parts PTFE Bushes (Edition P1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, PTFE

PREN 4166-1993 Aerospace Series Busching in PTFE for Clips Spring Tension (Edition P1)
PREN 4166-1994 Aerospace Series Clips@ Spring Tension@ Three Parts PTFE Bushes (Edition P1)

Japanese Industrial Standards Committee (JISC), PTFE

JIS K 7137-1:2001 Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation

IT-UNI, PTFE

UNI EN ISO 13000-1:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation

Korean Agency for Technology and Standards (KATS), PTFE

KS M ISO 13000-1-2011(2016) Plastics－Polytetrafluoroethylene(PTFE) semi-finished products－Part 1：Requirements and designation
KS M ISO 13000-1-2011(2021) Plastics－Polytetrafluoroethylene(PTFE) semi-finished products－Part 1：Requirements and designation
KS M ISO 13000-1-2021 Plastics－Polytetrafluoroethylene(PTFE) semi-finished products－Part 1：Requirements and designation
KS M ISO 13000-1:2011 Plastics－Polytetrafluoroethylene(PTFE) semi-finished products－Part 1：Requirements and designation

国家市场监督管理总局、中国国家标准化管理委员会, PTFE

GB/T 39714.1-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 1:Requirements and designation