ZH
RU
ES
Deuterium Reagent Acceptance
Deuterium Reagent Acceptance, Total:198 items.
In the international standard classification, Deuterium Reagent Acceptance involves: Analytical chemistry, Gears, Quality, Agricultural machines, implements and equipment, Acoustics and acoustic measurements, Equipment for the chemical industry, Welding, brazing and soldering, Insulation, Aids for disabled or handicapped persons, Products of the chemical industry, Organic chemicals, Adhesives, Road vehicle systems, Raw materials for rubber and plastics, Non-destructive testing, Water quality, Soil quality. Pedology, Lubricants, industrial oils and related products, Structures of buildings, Surface treatment and coating, Sterilization and disinfection, Plastics, Road engineering, Construction materials, Television and radio broadcasting, Non-ferrous metals, Electronic components in general, Petroleum products in general, Waxes, bituminous materials and other petroleum products.
工业和信息化部, Deuterium Reagent Acceptance
- HG/T 5170-2017 Isotope Abundance Determination of Stable Isotope Deuterium Labeling Reagent Halogenated Benzene by Gas Chromatography-Mass Spectrometry
- HG/T 5036-2016 Test method for catalytic performance of organic sulfur conversion and absorption catalysts at room temperature
(U.S.) Ford Automotive Standards, Deuterium Reagent Acceptance
- FORD FLTM BV 153-07-2001 WATER ABSORPTION TEST FOR ADHESIVES AND SEALANTS (Replaces FLTM EU-BV 053-07)
- FORD FLTM BV 109-01-2000 WELDING ACCEPTANCE TEST FOR WELD THROUGH SEALERS
- FORD FLTM BV 118-01-2000 SAG TEST FOR ADHESIVES AND SEALANTS Replaces FLTM BV 018-01 [Replaced: FORD FLTM BV 018-01]
- FORD FLTM BV 109-1-2000 WELDING ACCEPTANCE TEST FOR WELD THROUGH SEALERS
- FORD FLTM BV 117-01-2000 WATER ABSORPTION TEST FOR ADHESIVES AND SEALANTS Replaces FLTM BV 017-01 [Replaced: FORD FLTM BV 017-01]
- FORD FLTM BV 122-01-2000 MANDREL BEND TEST FOR ADHESIVES AND SEALANTS Replaces FLTM BV 022-01 [Replaced: FORD FLTM BV 022-01]
- FORD FLTM BV 107-01-2000 SEALER STAIN TEST - PLASTICIZER MIGRATION Replaces FLTM BV 007-01 [Replaced: FORD FLTM BV 007-01]
- FORD FLTM BV 116-01-2000 WASH RESISTANCE TEST FOR ADHESIVES AND SEALANTS Replaces FLTM BV 016-01 [Replaced: FORD FLTM BV 016-01]
- FORD FLTM BJ 107-03-2001 HUMIDITY TEST FOR RUST PREVENTIVE COMPOUNDS Replaces FLTM BJ 007-03, Replaces FLTM EU-BJ 007-03
- FORD FLTM BV 122-1-2000 MANDREL BEND TEST FOR ADHESIVES AND SEALANTS (Replaces FLTM BV 022-01)
- FORD FLTM BV 101-04-2000 CROSS LAP ADHESION TEST FOR ADHESIVES AND SEALANTS (Replaces FLTM BV 001-04)
- FORD FLTM BV 062-01-2014 ALUMINUM RESISTANCE SPOT WELDING ACCEPTANCE TEST FOR WELD THROUGH ADHESIVES AND SEALERS
- FORD FLTM BV 101-02-2000 COLD ADHESION TEST FOR BODY SEALERS Replaces FLTM BV 001-02
- FORD FLTM BU 105-01-2000 STAINING TEST FOR ADHESIVES AND PRESSURE SENSITIVE TAPES Replaces FLTM BU 005-01 [Replaced: FORD FLTM BU 005-01]
- FORD FLTM BV 106-01-2000 LEAK TEST FOR ENGINE AND CHASSIS SEALERS Replaces FLTM BV 006-01 [Replaced: FORD FLTM BV 006-01]
- FORD FLTM BV 114-01-2000 SPOT WELDING FLAMMABILITY TEST FOR WELD THROUGH SEALERS Replaces FLTM BV 014-01 [Replaced: FORD FLTM BV 014-01]
- FORD FLTM BV 101-1-2000 COLD ADHESION TEST FOR DEADENERS AND UNDERCOATING (Replaces FLTM BV 001-01)
- FORD FLTM AZ 102-01-2000 PREPARATION OF STANDARD LABORATORY REAGENTS AND INDICATORS Replaces FLTM AZ 002-01, FLTM EU-AZ 002-01 [Replaced: FORD FLTM AZ 002-01, FORD FLTM EU-AZ 002-01]
- FORD FLTM AZ 102-1-2000 PREPARATION OF STANDARD LABORATORY REAGENTS AND INDICATORS (Replaces FLTM AZ 002-01, FLTM EU-AZ 002-01)
- FORD FLTM BA 113-1-2001 SPOT WELDING ACCEPTANCE TEST FOR ZINC, ZINC/IRON AND ZINC/ALLOY COATED LOW CARBON STEEL SHEET (Replaces FLTM BA 013-01)
- FORD FLTM BA 113-01-2001 SPOT WELDING ACCEPTANCE TEST FOR ZINC, ZINC/IRON AND ZINC/ALLOY COATED LOW CARBON STEEL SHEET Replaces FLTM BA 013-01 [Replaced: FORD FLTM BA 013-01]
- FORD FLTM BU 152-02-2000 STAINING TEST FOR ADHESIVES ON TRIM MATERIALS Replaces FLTM EU-BU 052-02 [Replaced: FORD FLTM EU-BU 052-02]
- FORD FLTM BV 101-06-2001 OVERLAP SHEAR ADHESION TEST FOR ADHESIVES AND SEALANTS (Replaces FLTM BV 001-06)
- FORD FLTM BV 151-1-2001 COLD ADHESION TEST FOR SPRAY DEADENERS AND UNDERCOATING (Replaces FLTM EU-BV 051-01)
- FORD FLTM BB 113-07-2002 WELDING ACCEPTANCE TEST FOR ALUMINUM (Formerly FLTM BA 113-07)
- FORD FLTM BV 107-02-2000 STAINING TESTS FOR WINDSHIELD SEALERS Replaces FLTM BV 007-02, FLTM EU-BV 007-02 [Replaced: FORD FLTM BV 007-02, FORD FLTM EU-BV 007-02]
Canadian General Standards Board （CGSB), Deuterium Reagent Acceptance
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Deuterium Reagent Acceptance
- GB/T 619-1988 Chemical reagent--Regulations for sampling and acceptance
- GB/T 13465.5-2009 Test method of contraction of the impermeable graphite phenolic aldehyde agglomerant
- GB/T 31193-2014 Test method of activity for titanium oxide type sulfur recovery catalyst
- GB/T 31198-2014 Test method of activity for deoxidizing protection type sulfur recovery catalyst
- GB/T 31583-2015 Test method of physical properties for deoxidizing protection type sulfur recovery catalyst
Professional Standard - Chemical Industry, Deuterium Reagent Acceptance
- HG/T 3921-2006 Chemical reagent.Regulations for sampling and acceptance
- HG/T 2380-1992 Test method for shrinkage of graphite phenolic adhesive
- HG/T 5035~5037-2016 Catalytic Performance Test of Nitrobenzene Hydrogenation to Aniline Catalyst and Normal Temperature Organic Sulfur Conversion and Absorption Catalyst and Activity Test Method of Methanol Hydrogen Production Catalyst (2016)
Professional Standard - Agriculture, Deuterium Reagent Acceptance
- GB 619-1988 Chemical reagent sampling and acceptance rules
American Society for Testing and Materials (ASTM), Deuterium Reagent Acceptance
- ASTM F716-82(2001) Standard Methods of Testing Sorbent Performance of Absorbents
- ASTM F716-82(1993)e1 Standard Methods of Testing Sorbent Performance of Absorbents
- ASTM F716-09 Standard Test Methods for Sorbent Performance of Absorbents
- ASTM F716-07 Standard Test Methods for Sorbent Performance of Absorbents
- ASTM D3401-97 Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
- ASTM D3401-97(2017) Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
- ASTM D3401-97(2012) Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
- ASTM C1241-14(2022) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
- ASTM C1241-00(2005) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
- ASTM E1220-05 Standard Test Method for Visible Penetrant Examination Using the Solvent-Removable Process
- ASTM D2110-00(2012) Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
- ASTM D2106-07(2012) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
- ASTM E1219-05 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process
- ASTM D7575-11 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
- ASTM E1520-99 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM E1520-99(2004) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM D7098-05 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM D7098-06e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM D7098-06 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM D7098-08e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM E1520-99(2015) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM D2106-05 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
- ASTM D2106-07(2017) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
- ASTM D1768-89(1995)e1 Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM F716-18 Standard Test Methods for Sorbent Performance of Absorbents for Use on Chemical and Light Hydrocarbon Spills
- ASTM D7098-08(2015) Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- ASTM D5153-10 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
- ASTM D5153-10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
- ASTM D6903-07(2013) Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
- ASTM D5547-95(2003) Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
- ASTM D3367-98(2004) Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
- ASTM D5547-95 Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
- ASTM D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
- ASTM D3367-09 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
- ASTM D5547-95(2009) Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
- ASTM D7575-10e1 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
- ASTM D5153-22 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
- ASTM D6847-02 Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
- ASTM D7575-10 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
- ASTM D7575-11(2017) Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
- ASTM D6129-97(2021) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
- ASTM D6129-97(2015) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
- ASTM D6903-07 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
- ASTM D2074-07(2019) Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
- ASTM D6129-97(2007) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
- ASTM D6129-97 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
- ASTM D6129-97(2002) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
- ASTM PS136-02 Standard Provisional Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
- ASTM C413-18 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM D3367-13 Standard Test Method for Plasticizer Sorption of Polylpar;Vinyl Chloriderpar; Resins Under Applied Centrifugal Force
- ASTM E1938-97 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
- ASTM E668-10 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
- ASTM D1768-89(2009) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM D1768-89(2016) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM E668-13 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
- ASTM D1319-15 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
- ASTM E668-05 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
British Standards Institution (BSI), Deuterium Reagent Acceptance
- BS 7676-2:1993 Acceptance code for gears. Determination of mechanical vibrations of gear units during acceptance testing
- BS ISO 4652:2012 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
- BS EN 302-4:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
- BS EN 302-4:2004 Adhesives for load-bearing timber structures - Test methods - Determination of the effects of wood shrinkage on the shear strength
- BS 2782-4 Method 434B:1977 Methods of testing plastics - Chemical properties - Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract
- BS EN 13074:2002 Methods of test for petroleum and its products - Petroleum products - Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation
Association Francaise de Normalisation, Deuterium Reagent Acceptance
- NF E51-271*NF ISO 18740:2016 Turbocompressors - Performance test code - Simplified acceptance test
- NF ISO 18740:2016 Turbocompresseurs - Code d'essais des performances - Essai de réception simplifié
- NF EN 480-5:2006 Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 5 : détermination de l'absorption capillaire
- NF P18-364:2016 Adjuvants pour bétons, mortiers et coulis - Coulis courants d'injection pour précontrainte - Essai d'absorption capillaire
- NF T76-152-4*NF EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4 : determination of the effects of wood shrinkage on the shear strength
- NF EN 302-4:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 4 : détermination de l'influence du retrait du bois sur la résistance au cisaillement
Shanxi Provincial Standard of the People's Republic of China, Deuterium Reagent Acceptance
- DB1404/T 10-2021 Reagent acceptance management requirements for inspection and testing institutions
RU-GOST R, Deuterium Reagent Acceptance
- GOST 28301-2007 Grain harvesters. Test methods
- GOST 3885-1973 Reagents and superpure substances. Regulations of acceptance, sampling, packing, marking, transportation and storage
- GOST R 56457-2015 Digital video broadcasting. Integrated receiver decoder of a second generation digital satellite television broadcasting system (DVB-T2). Test metods
- GOST R 56151-2014 Digital Video Broadcasting. Test reciever of a second generation digital terrestrial television broadcasting system (DVB-T2). Basic parameters. Technical requirements
GM North America, Deuterium Reagent Acceptance
- GM GM9753P-1991 Tensile and Shrinkage Test for Expanding Adhesives and Sealers
- GM GM9641P-2011 Push Out Force Test for Sealants and Adhesives (Issue 2; Do Not Use on New Programs; No Replacement)
- GM GM9802P-2011 Adhesion Test for Sealants (Issue 3; Do Not Use on New Programs; Replaced by GMW3019)
- GM9753P-2011 Tensile and Shrinkage Test for Expanding Adhesives and Sealers Issue 4; Do Not Use on New Programs; No Replacement
- GM GM9013P-2010 Test for Viscosity of Adhesives and Sealers (Issue 6; Do Not Use on New Programs; Replaced by SAE J1524)
- GM GM9775P-2011 Tensile Test for Adhesive for Bonding Stationary Glass (Issue 3; Do Not Use on New Programs; Replaced by GMW15736)
Danish Standards Foundation, Deuterium Reagent Acceptance
- DS/ISO 8579-1:2003 Acceptance code for gear units - Part 1: Test code for airborne sound
- DS/EN ISO 11140-4:2007 Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration
- DS/ISO 17190-7:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 7: Test method for gravimetric determination of absorption against pressure
- DS/EN 480-5:2005 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption
- DS/EN 302-4:1994 Adhesives for load-bearing timber structures. Test methods. Part 4: Determination of the effect of wood shrinkage on the shear strength
- DS/EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
IN-BIS, Deuterium Reagent Acceptance
European Committee for Standardization (CEN), Deuterium Reagent Acceptance
- EN ISO 23277:2009 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels [Superseded: CEN EN 1289]
- EN ISO 23278:2009 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels [Superseded: CEN EN 1291]
- EN ISO 9653:2000 Adhesives - Test Method for Shear Impact Strength of Adhesives Bonds ISO 9653: 1998; Supersedes EN 29653: 1994
- EN ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints Supersedes EN 29142: 1993; ISO 9142: 2003
- EN ISO 11140-4:2007 Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dicktype test for detection of steam penetration
- EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
- prEN 302-4-2021 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
- EN 302-4:2023 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
European Committee for Electrotechnical Standardization（CENELEC）, Deuterium Reagent Acceptance
- EN 60193:1999 Hydraulic turbines, storage pumps and pump-turbines Model acceptance tests
Group Standards of the People's Republic of China, Deuterium Reagent Acceptance
- T/SDAS 247-2021 Management specifiaction of reagent consumables of ecological environmental monitoring laboratory
Taiwan Provincial Standard of the People's Republic of China, Deuterium Reagent Acceptance
- CNS 8789-1988 Method of Test for Solvent Resistance of Heat Shrinkable Tubing for Electrical Insulation
Korean Agency for Technology and Standards (KATS), Deuterium Reagent Acceptance
- KS P ISO 17190-1-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－
- KS P ISO 17190-7-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 7：Gravimetric determination of absorption under pressure
- KS P ISO 17190-3-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation
- KS P ISO 17190-4-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 4：Determination of moisture content by mass loss upon heating
- KS P ISO 17190-11-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 11：Determination of content of respirable particles
- KS P ISO 17190-2-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 2：Determination of amount of residual monomers
- KS P ISO 17190-9-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 9：Gravimetric determination of density
- KS P ISO 17190-8-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 8：Gravimetric determination of flowrate
- KS P ISO 17190-10-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 10：Determination of extractable polymer content by potentiometric titration
Hebei Provincial Standard of the People's Republic of China, Deuterium Reagent Acceptance
- DB13/T 81.25-1992 Qualitative test method for hexachlorobenzene in fireworks and firecrackers mixture
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Deuterium Reagent Acceptance
- GB/T 33103-2016 Test method of activity for alumium oxide type sulfur recovery catalyst
- GB/T 35961-2018 Test method of physical properties for titanium oxide type sulfur recovery catalysts
Society of Automotive Engineers (SAE), Deuterium Reagent Acceptance
- SAE J1659-2011 Vehicle Testing Requirements for Replacement Refrigerants for CFC-12 (R-12) Mobile Air-Conditioning Systems
SAE - SAE International, Deuterium Reagent Acceptance
- SAE J1659-1993 Vehicle Testing Requirements for Replacement Refrigerants for CFC-12 (R-12) Mobile Air-Conditioning Systems
The American Road & Transportation Builders Association, Deuterium Reagent Acceptance
- AASHTO T 170-2000(R2009) Standard Method of Test for Recovery of Asphalt Binder from Solution by Abson Method
- AASHTO T 319-2014 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
- AASHTO T 319-2015 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
API - American Petroleum Institute, Deuterium Reagent Acceptance
- API PUBL 4390-1985 Test Results of Surfactant Enhanced Gasoline Recovery in a Large-Scale Model Aquifer
International Organization for Standardization (ISO), Deuterium Reagent Acceptance
- ISO/TR 20152-3:2013 Timber structures-Bond performance of abhesives-part 3:Use of alternative species for bond tests
- ISO 4652:2012 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
German Institute for Standardization, Deuterium Reagent Acceptance
- DIN 51391-1:1997 Testing of lubricants - Determination of additive elements - Part 1: Direct determination by atomic absorption spectrometry
- DIN 51431-1:1997 Testing of lubricants - Determination of the magnesium content - Part 1: Direct determination by atomic absorption spectrometry
- DIN 51443:1992 Testing of lubricants; determination of the boron content in lubricating oils; direct determination by Atomic Absorption Spectrometry (AAS)
- DIN EN 480-5:2005-12 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption; German version EN 480-5:2005
- DIN EN ISO 11140-4:2007 Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007);German version EN ISO 11140-4:2007
- DIN EN 302-4:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength; German version EN 302-4:2023
未注明发布机构, Deuterium Reagent Acceptance
- DIN EN 12697-3:2005 Asphalt – Test method for hot asphalt – Part 3: Recovery of the binder: rotary evaporator
- DIN EN 12697-4:2001 Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Binder recovery: Fractionating column
- DIN EN 12697-3:2001 Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Binder recovery: Rotary evaporator
- DIN EN 480-5:1997 Admixtures for concrete, mortar and grout — Test methods — Part 5: Determination of capillary absorption
BELST, Deuterium Reagent Acceptance
- STB 1769-2013 Stabilizing fibrous admixture for asphaltic concrete mixtures. Technical requirements, test methods and acceptance
AASHTO - American Association of State Highway and Transportation Officials, Deuterium Reagent Acceptance
- T 319-2003 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
- T 319-2014 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
- T 319-2008 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
American Concrete Institute, Deuterium Reagent Acceptance
- ACI 374.1-2005 Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary
TH-TISI, Deuterium Reagent Acceptance
- TIS 1710.1-1998 Rubber compounding ingredients.carbon black.determination of specific surface area by nitrogen adsorption methods.part 1: single-point procedures
Lithuanian Standards Office , Deuterium Reagent Acceptance
- LST EN 480-5-2006 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption
- LST EN 302-4-2004 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
AENOR, Deuterium Reagent Acceptance
- UNE-EN 480-5:2006 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption
- UNE-EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
AT-ON, Deuterium Reagent Acceptance
- OENORM EN 302-4-2021 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength