ZH

RU

ES

Tin content in the air

Tin content in the air, Total:499 items.

In the international standard classification, Tin content in the air involves: Products of the chemical industry, Wood, sawlogs and sawn timber, Paints and varnishes, General methods of tests and analysis for food products, Analytical chemistry, Food products in general, Non-ferrous metals, Air quality, Rubber and plastics products, Testing of metals, Glass, Wastes, Transformers. Reactors, Processes of the textile industry, Power stations in general, Spices and condiments. Food additives, Occupational safety. Industrial hygiene, Construction materials, Products of non-ferrous metals, Fuels, Powder metallurgy, Installations in buildings, Insulating fluids, Vocabularies, Waxes, bituminous materials and other petroleum products, Lubricants, industrial oils and related products, Acoustics and acoustic measurements, Physics. Chemistry, Tobacco, tobacco products and related equipment, Farming and forestry, Compressors and pneumatic machines, Organic chemicals, Natural gas, Postal services, Electrical wires and cables, Inorganic chemicals, Materials for the reinforcement of composites, Protective equipment, Cereals, pulses and derived products, Fruits. Vegetables, Galvanic cells and batteries, Protection of and in buildings, Coals, Passenger and cabin equipment, Environmental protection.


CZ-CSN, Tin content in the air

  • CSN 56 0073-1972 Determination of tin content in food roducts
  • CSN 38 5526-1961 Determination of che benzole content and carbonisacion gasoline content in gas
  • CSN ISO 4848:1994 Concrete.Determinatin of air content of freshly mixed concrete.Pressure method
  • CSN 73 1313-1968 Determination of air content in air-entrained concrete mixture
  • CSN 83 4728 Cast.4-1984 Air quality. Emission measurement of ammonia from stationary sources of air pollution. Photometric method
  • CSN 83 4728 Cast.3-1984 Air quality. Emission measurement of ammonia from stationary sources of air pollution. Titration method
  • CSN 83 4728 Cast.5-1984 Air quality. Emission measurement of ammonia from stationary sources of air pollution. Potentiometric method
  • CSN 38 5525-1961 Determination of the content of pyridine bases in coke-oven gas
  • CSN 83 5510-1983 Measurement methods of air poTlutants In ambient air. General requirements
  • CSN 83 4728 Cast.2-1984 Air quality. Emission measurement of ammonia from stationary sources of air pollution. Sampling for manual methods
  • CSN 80 0215-1993 Linear density determination of flax fibres by an airflow method
  • CSN 72 2444-1968 Testing o? air content in aerated fresh mortar
  • CSN 83 5611-1984 Air pollution control. Determination of flying dust in ambient air. Gravimetric method

ZA-SANS, Tin content in the air

PL-PKN, Tin content in the air

  • PN H04805-10-1991 Zinc powder Determination of tin content
  • PN Z04041-1971 Deferminafion o? ammonia confent in air
  • PN Z04044-1970 De?erminoiion of phenol yapours conten? in air
  • PN Z04060-1971 Determination of pyridine vopours content in ai
  • PN Z04082-1969 De?ermina?ion o? chlorobenzene vapór? content in air
  • PN Z04036-1970 Determination of ni?robenzene yapours con?en? in air
  • PN Z04075-1961 Speedy Me?hod for De?er mina?ion of Ni?rogen Oxyde* in Air
  • PN Z04071-1961 Determination of vapor n-butyl alcohol con?ens in air. Speedy me?hod
  • PN Z04229-02-1992 Air purity protection ests for content of tin and its ompounds etermination of tin and its inorganic ompounds in work places y spectrophotometric method with yrocatechol violet
  • PN Z04072-1961 Determination of Thionyl Chloride Vaponr Contens in Air. Speedy Method
  • PN Z04062-1971 Air pur?ty protectton Determination of hydirogen bromide content
  • PN Z04058-1971 Air purity protectiom Determinatioin of fuirfural content
  • PN Z04045-09-1992 Air purity protection ests for content of aldehydes etermination of furfuraldehyde n work places by gas chromatography
  • PN Z04020-01-1991 Air purity protection. Tests for elemental carbon content. General
  • PN Z04035-1971 Air purity ponotection Determination of styrane conteint
  • PN Z04045-01-1992 Air purity protection Tests for content of aldehydes General
  • PN Z04064-1971 Air purity protection Determination of dimethylamine content
  • PN Z04152-05-1993 Air purity protection. Tests for styrene content. Determination of styrene in ambient air (imission) by gas chromatography
  • PN Z04222-02-1991 Air purity protection. Tests for carbon black content. Determination of carbon black in work places by gravimetric method
  • PN Z04020-02-1991 Air purity protection. Tests for elemental carbon content. Determination of elemental carbon in dust in ambient air (immission) by gas chromatography
  • PN Z04225-03-1993 Air purity protection. Tests for hydrogen chloride content. Determination of hydrogen chloride by turbidimetry in workplaces with sampling using gas washing bottles
  • PN Z04048-1969 De?ermination of ace?one vapours content in air
  • PN Z04214-01-1991 Air purity protectionTests for furfuryl alcohol content General
  • PN Z04224-01-1992 Air purity protection Tests for propyl alcohol content General
  • PN Z04009-04-1993 Air purity protection. Tests for content of nitrogen and its compounds. Determination of nitrates in dust in ambient air (imission) by spectrophotometric method with sodium salicilate
  • PN Z04227-02-1992 Air purity protection ests for kerosene content etermination of kerosene vapours n work places by gas chromatography
  • PN Z04225-01-1992 Air purity protection Tests for hydrogen chloride content General
  • PN Z04227-01-1992 Air purity protection ests for kerosene content eneral

Professional Standard - Chemical Industry, Tin content in the air

  • HG/T 4552.1~4552.3-2013 Determination method of tin content in tin stripping wastewater (2013)
  • HG/T 4552.1-2013 Method for the measurement tin-content in spent tin-stripping solution.Part 1:Potassium iodate titration method
  • HG/T 4552.2-2013 Method for the measurement tin-content in spent tin-stripping solution.Part 2:Atomic absorption spectrophotometry method
  • HG/T 4552.3-2013 Method for the measurement tin-content in spent tin-stripping solution.Part 3:Inductively coupled plasma atomic emission spectrometric method
  • HG/T 5362~5365-2018 Treatment and disposal methods of chromium-containing waste liquid, phosphorous-containing waste liquid and tin-containing waste liquid and determination method of copper content in copper-containing sludge (2018)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Tin content in the air

  • GB/T 34706-2017 Determination of organotins content in coatings—Gas chromatography/mass spectrometry method
  • GB/T 35492-2017 Determination of organotin content of latex products—GC-MS method

HU-MSZT, Tin content in the air

RO-ASRO, Tin content in the air

Chongqing Provincial Standard of the People's Republic of China, Tin content in the air

国家质量监督检验检疫总局, Tin content in the air

  • SN/T 4558-2016 Determination of tricyclic tin (triazoletin) and styrenebutin content in exported foods
  • SN/T 4675.17-2016 Determination of butyltin content in exported wines by gas chromatography-mass spectrometry/mass spectrometry
  • SN/T 4949-2017 Determination of dioxane content in detergent products by headspace gas chromatography-mass spectrometry

Korean Agency for Technology and Standards (KATS), Tin content in the air

  • KS D 1758-2005 Method for determination of tin in zinc metal
  • KS D 1879-2003 Determination of tin in iron and steel
  • KS D 1872-2011 Methods for determination of tin in aluminium and aluminium alloys
  • KS D 2581-1995 Methods for determination of tin in zirconium alloys
  • KS D 1894-2013 Methods for determination of tin in copper and copper alloys
  • KS M 1075-2008 Determination of organotin compounds(MBT, DBT, TBT) in ceramic powder-GC/MS method
  • KS K 0737-2019 Determination of selected organotin compounds content in textiles
  • KS K 0737-2007 Test method for the determination of selected organotin compounds in textiles
  • KS M 2300-2005 Methods for determination of oxygen in flue gas
  • KS M 2304-2006 Method for determination of phosgene in exhaust gas
  • KS L 3136-2005 Testing method for air content of hydraulic cement mortar
  • KS M 2098-2004 Methods for determination of ammonia in exhaust gas
  • KS M 2100-2005 Methods for determination of chlorine in flue gas
  • KS M 2302-2006 Methods for determination of arsenic in flue gas
  • KS M 2402-2007 Petroleum products-Gasoline-Determination of lead content
  • KS M 2402-1982 Petroleum products-Gasoline-Determination of lead content
  • KS L 3136-2021 Standard test method for air content of hydraulic cement mortar
  • KS B 5353-1980 Continuous Analyzers for Oxygen in Flue Gas
  • KS K 0737-2014 Test method for determination of selected organotin compounds content in textiles
  • KS I ISO 5221-2007(2012) Air distribution and air diffusion-Rules to methods of measuring air flow rate in an air handling duct
  • KS D ISO 4496:2003 Metallic powders-Determination of acid-insoluble content in iron, copper,tin and bronze powders
  • KS D ISO 4496-2003(2018) Metallic powders-Determination of acid-insoluble content in iron, copper,tin and bronze powders
  • KS M 2104-2005 Methods for determination of hydrogen cyanide in exhaust gas
  • KS M 2096-2013 Method for determination of cadmium and lead in stack gas
  • KS B 5356-1981 Continuous analyzers for chlorine in ambient air
  • KS M 2102-2005 Methods for determination of hydrogen chloride in flue gas
  • KS M 2103-2004 Analytical methods for determination of hydrogen sulfide in exhaust gas
  • KS M 2096-2006 Method for determination of cadmium and lead in stack gas
  • KS B 5356-2001 Continuous analyzers for chlorine in ambient air
  • KS M 2096-1985 Method for determination of cadmium and lead in stack gas
  • KS M 2097-2005 Methods for determination of carbon monoxide in flue gas
  • KS M 2303-2006 Methods for determination of carbon disulfide in exhaust gas
  • KS M 2099-2005 Methods for determination of fluorine compounds in exhaust gas
  • KS I ISO 16000-3:2008 Indoor air-Part 3:Determination of formaldehyde and other carbonyl compounds-Active sampling method
  • KS I ISO 16000-3:2014 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — N sampling method
  • KS B ISO 8573-2-2003(2008) Compressed air for general use-Test methods for aerosol oil content
  • KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
  • KS I ISO 13138:2020 Air quality — Sampling conventions for airborne particle deposition in the human respiratory system
  • KS I ISO 13794-2008(2018) Ambient air-Determination of asbestos fibres-Indirect-transfer transmission electron microscopy method
  • KS F 2421-2006 Method of test for air content of fresh concrete by pressure method
  • KS B ISO 8573-4-2003(2008) Compressed air-Test methods for solid particle content
  • KS I 2005-2005(2010) Air quality-Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
  • KS I ISO 5221:2007 Air distribution and air diffusion-Rules to methods of measuring air flow rate in an air handling duct
  • KS I ISO 9855-2005(2020) Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS I ISO 13964-2014(2019) Air quality — Determination of ozone in ambient air — Ultraviolet photometric method
  • KS B 5354-2003 Continuous analyzers for dioxide sulfur in flue gas
  • KS B 5360-1990 Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS B 5359-1990 Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5358-1987 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5358-2001 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5360-2001 Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS B 5358-1982 Continuous analyzer for carbon monoxide in ambient air
  • KS I ISO 4219:2022 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment
  • KS A 0080-2007 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
  • KS B 5644-2008 Continuous analyzers for fluorine compounds in ambient air

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tin content in the air

  • GB/T 5009.215-2008 Determination of organotins in foods
  • GB 16216-1996 Health standard for tin dioxide in the air of workplace
  • GB 18547-2001 Occupational exposure limit for dioctyltin-S,S'-bis(isooctylmercaptoacetate) in the air of workplace
  • GB 16199-1996 Health standard for dibutyltin dilaurate in the air of workplace
  • GB/T 12210-1990 Determination of ammonia of gas in urban area
  • GB/T 42515-2023 Determination of acid-insoluble content in metal powders iron, copper, tin and bronze powders
  • GB/T 41682-2022 Determination of headspace gas content in plastic packaging container for food—Sensor method
  • GB/T 26570.1-2011 Determination of particle in gases.Light-scattering method.Part 1:Determination of particle in pipeline gases
  • GB/T 12209.2-1990 Determination of naphthalene of gas in urban area--Gas chromatographic method
  • GB/T 12211-1990 Determination of hydrogen sulfide of gas in urban area
  • GB/T 11060.1-1998 Natural gas--Determination of hydrogen sulfide content--Iodometric titration method
  • GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
  • GB/T 14605-1993 Determination of trace argon, nitrogen and krypton inoxygen. Gas chromatographic method
  • GB/T 13277.2-2015 Compressed air.Part 2:Test methods for oil aerosol content
  • GB/T 13277.9-2022 Compressed air—Part 9:Test methods for liquid water content
  • GB/T 12209.1-1990 Determination of naphthalene of gas in urban area--Picric acid method
  • GB 24428-2009 Limitation of mercury content for zinc silver oxide,zinc oxygen and zinc manganese dioxide button batteries
  • GB/T 17062-1997 Workplace air--Determination of tin and its inorganic compounds--Flame atomic absorption spectroscopy
  • GB/T 32492-2016 Content of dimethyl ether in liquefied petroleum gas by gas chromatography

Indonesia Standards, Tin content in the air

Japanese Industrial Standards Committee (JISC), Tin content in the air

Jiangxi Provincial Standard of the People's Republic of China, Tin content in the air

AR-IRAM, Tin content in the air

API - American Petroleum Institute, Tin content in the air

NO-SN, Tin content in the air

  • NS 4870-1985 Air quality - Acrolein content in workplace atmosphere
  • NS 4869-1985 Air quality - Nitrogen dioxide content in workplace atmosphere - Colometric metod
  • NS 4868-1985 Air quality - Content of lower aldehydes and ketones in workplace atmosphere - Volumetric method
  • NS 4855-1981 Air quality - Determination of nitrogendioxide in ambient air
  • NS 4850-1980 Air quality - Determination of gaseous sulphur compounds in ambient air - Sampling equipment

SE-SIS, Tin content in the air

  • SIS SS 02 84 14-1980 Workplace atmosphere — Formaldehyde content in air — Colorimetric method
  • SIS SS 02 84 13-1980 Workplace atmosphere - Content of lower aldehydes and ketones in air — Volumetric method
  • SIS SS 02 84 16-1980 Workplace atmosphere — Acrolein content in air — Colorimetric method
  • SIS SS 02 84 15-1980 Workplace atmosphere — Nitrogen dioxide content in air — Colorimetric method

British Standards Institution (BSI), Tin content in the air

  • DD CEN/TS 15022-4:2006 Copper and copper alloys — Determination of tin content — Part 4: Medium tin content — Flame atomic absorption spectrometry method (FAAS)
  • BS 3338-2:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in ingot tin (aluminium reduction method)
  • BS 3338-3:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in ingot tin (photometric method)
  • BS 3338-5:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of lead in ingot tin and tin-antimony solders (photometric method)
  • BS 3338-11:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in solders (nickel coil reduction method)
  • BS 3338-21:1983 Methods for the sampling and analysis of tin and tin alloys - Determination of high cadmium content of soft solders
  • BS 3338-7:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of silver in solders (volumetric: ammonium thiocyanate method)
  • BS EN 13615:2001(2002) Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • BS 3338-8:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
  • BS 3338-10:1961 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)
  • BS 3338-16:1965 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)
  • BS EN ISO 4496:2017 Metallic powders. Determination of acid-insoluble content in iron, copper, tin and bronze powders
  • BS 3338-9:1965 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)
  • BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles
  • BS ISO 8573-4:2019 Compressed air. Contaminant measurement - Particle content
  • BS 3338-20:1970 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of nickel in capping metal (photometric method)
  • BS EN 24496:1993 Metallic powders - Determination of acid insoluble content in iron, copper, tin and bronze powders
  • BS ISO 8573-2:2007 Compressed air - Test methods for oil aerosol content
  • PD CEN/TS 17660-1:2021 Air quality. Performance evaluation of air quality sensor systems. Gaseous pollutants in ambient air
  • BS ISO 8573-6:2003 Compressed air - Test methods for gaseous contaminant content
  • BS 3338-13:1965 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)
  • BS ISO 8573-2:2018 Tracked Changes. Compressed air. Contaminant measurement. Oil aerosol content
  • BS EN 13274-6:2002 Respiratory protective devices - Methods of test - Determination of carbon dioxide content of the inhalation air
  • BS EN 1015-7:1999 Methods of test for mortar for masonry - Determination of air content of fresh mortar
  • BS EN 12350-7:2000 Testing fresh concrete - Air content - Pressure methods
  • BS ISO 8573-9:2004 Compressed air - Test methods for liquid water content
  • BS 3338-15:1965 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)
  • BS 3338-18:1966 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)
  • BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
  • BS ISO 8573-4:2001 Compressed air - Test methods for solid particle content
  • BS 1747-11:1993 Methods for measurement of air pollution. Determination of a black smoke index in ambient air
  • BS ISO 8573-5:2002 Compressed air - Test methods for oil vapour and organic solvent content

CEN - European Committee for Standardization, Tin content in the air

  • PD CEN/TS 15022-4:2006 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS)

Danish Standards Foundation, Tin content in the air

  • DS/EN 15022-4:2012 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
  • DS/EN 13615/AC:2003 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90% and 99,85% by atomic spectrometry
  • DS/EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90% and 99,85% by atomic spectrometry
  • DS/EN 24496:1994 Metallic powders-Determination of acid-insoluble content in iron,copper,tin and bronze powders
  • DS/ISO 4496:1994 Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders
  • DS/EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air

Lithuanian Standards Office , Tin content in the air

  • LST EN 15022-4-2012 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
  • LST EN 13615-2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • LST EN 13615-2002/AC-2003 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • LST EN 24496-2000 Metallic powders - Determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
  • LST EN 15549-2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air

AENOR, Tin content in the air

  • UNE-EN 15022-4:2012 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
  • UNE-EN 24496:2003 Metallic powders - Determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
  • UNE-EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • UNE 81588:1991 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF VYNIL CHLORIDE IN AIR
  • UNE 81582:1991 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF CHLORINATED HYDROCARBONS IN AIR
  • UNE 77221:2000 AIR QUALITY. DETERMINATION OF OZONE IN AMBIENT AIR. ULTRAVIOLET PHOTOMETRIC METHOD.
  • UNE 77202:1991 AIR QUALITY. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR. SAMPLING EQUIPMENT.

Taiwan Provincial Standard of the People's Republic of China, Tin content in the air

  • CNS 3797-1975 Method for Measuring Water Content in Stack Gas
  • CNS 14561-2001 Method of test for determination of bezene and toluene in finished motor and aviation gasoline by gas chromatography
  • CNS 3948-1976 Nethod of Test for Moisture in Ethylene
  • CNS 3798-1975 Location for Measurement of Dust Content in Stack Gas.
  • CNS 787-1983 Method of Test for Air Content of Hydraulic Cement Mortar
  • CNS 9662-1987 Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • CNS 9661-1987 Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method

European Committee for Standardization (CEN), Tin content in the air

  • EN 15022-4:2011 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
  • EN ISO 4496:2017 Metallic powders - Determination of acid-insoluble content in iron@ copper@ tin and bronze powders
  • EN 24496:1993 Metallic powders; determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
  • EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • CEN EN 15549-2008 Air quality — Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
  • FprCEN/TS 17660-1-2021 Air quality - Performance evaluation of air quality sensor systems - Part 1: Gaseous pollutants in ambient air
  • prEN 481-1992 Workplace atmospheres; size fraction definitions for measurement of airbone particles

BE-NBN, Tin content in the air

German Institute for Standardization, Tin content in the air

  • DIN ISO 13964:1999 Air quality - Determination of ozone in ambient air - Ultraviolet photometric method (ISO 13964:1998)
  • DIN EN 15022-4:2012 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS); German version EN 15022-4:2011
  • DIN EN 15022-4:2012-01 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS); German version EN 15022-4:2011
  • DIN EN ISO 4496:2017-11 Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders (ISO 4496:2017); German version EN ISO 4496:2017
  • DIN EN 13615:2002-04 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry; German version EN 13615:2001
  • DIN EN ISO 4496:2017 Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders (ISO 4496:2017)
  • DIN EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
  • DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
  • DIN ISO 16000-3:2013 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011)
  • DIN CEN/TS 15506:2007 Foodstuffs - Determination of trace elements - Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS); German version CEN/TS 15506:2007
  • DIN ISO 13964:1999-12 Air quality - Determination of ozone in ambient air - Ultraviolet photometric method (ISO 13964:1998)
  • DIN CEN/TS 17660-1:2022-04 Air quality - Performance evaluation of air quality sensor systems - Part 1: Gaseous pollutants in ambient air; German version CEN/TS 17660-1:2021
  • DIN ISO 4219:1990 Air quality; determination of gaseous sulfur compounds in ambient air; sampling equipment; identical with ISO 4219:1979

Association Francaise de Normalisation, Tin content in the air

  • NF EN 13615:2002 Méthodes pour l'analyse des lingots d'étain - Détermination des teneurs en impuretés dans l'étain de qualité 99,90 % et 99,85 % par spectrométrie atomique
  • NF X43-256:1988 AIR QUALITY. WORKPLACE AIR. SAMPLING AND DETERMINATION OF LEAD AIRBONE PARTICULATE MATTER.
  • NF X43-027:1993 Air quality. Ambient air. Determination of lead in aerosols X-ray fluorescence spectrometry.
  • NF X43-011:1975 Air pollution. Determination of gaseous sulphur compounds in ambient air sampling equipment and method.
  • NF X43-275:2002 Qualité de l'air - Air des lieux de travail - Dosage d'éléments présents dans l'air des lieux de travail par spectrométrie atomique
  • NF X43-253:1987 Air quality. Workplace air. Determination of ethylene oxide.
  • NF A06-903*NF EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry.
  • NF EN 15022-4:2011 Cuivre et alliages de cuivre - Détermination de la teneur en étain - Partie 4 : étain en moyenne teneur - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)
  • NF X43-019:1983 Atmospheric pollution. Determination of the sulphur dioxide content of the ambient air by means of ultraviolet fluorescence.
  • NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.
  • NF X43-012:1974 Determination of carbon monoxide content in the ambient outdoor air, by absorption of an infrared radiation.
  • NF X43-404-3*NF ISO 16000-3:2011 Indoor air - Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Part 3 : Active sampling method.
  • NF E51-301-2*NF ISO 8573-2:2018 Compressed air - Contaminant measurement - Part 2 : oil aerosol content
  • NF X43-020:1983 ATMOSPHERIC POLLUTION. DETERMINATION OF TOTAL GASEOUS SULPHUR OR SULPHUR DIOXIDE ONLY BY FLAME. PHOTOMETRY IN AMBIANT AIR.
  • NF EN 15549:2008 Qualité de l'air - Méthode normalisée pour le mesurage de la concentration du benzo[a]pyrene dans l'air ambiant
  • NF X43-560*NF EN 15549:2008 Air quality - Standard method for the measurement of the concentration of Benzo[a]pyrene in ambient air
  • NF X43-404-34*NF ISO 16000-34:2019 Indoor air - Part 34 : strategies for the measurement of airborne particles
  • NF ISO 13964:1999 Qualité de l'air - Dosage de l'ozone dans l'air ambiant - Méthode photométrique dans l'ultraviolet.
  • XP X43-100-1*XP CEN/TS 17660-1:2022 Air quality - Performance evaluation of air quality sensor systems - Part 1 : gaseous pollutants in ambient air
  • XP CEN/TS 17660-1:2022 Qualité de l'air - Evaluation des performances des systèmes capteurs de la qualité de l'air - Partie 1 : polluants gazeux dans l'air ambiant
  • NF ISO 8573-2:2018 Air comprimé - Mesurage de contaminants - Partie 2 : teneur en aérosols d'huile

YU-JUS, Tin content in the air

  • JUS U.M1.031-1982 Concrete. Determ inati on of air conteints in fresh concrete
  • JUS Z.B0.001-1991 Safety precautions. Maximum allowable concentrations of toxic gases vapours and aerosols in working premises atmosphere
  • JUS C.A1.520-1990 Metallc ponders. Determlnation of acl?-insolable cantent in iron, copper, tin and brcmze pcmders
  • JUS H.Z1.307-2003 Air quality - Ambient air Determination of settleable matter content by means of metal plaquettes
  • JUS B.C8.050-1981 Air content of hydraulic cement mortar

国家市场监督管理总局、中国国家标准化管理委员会, Tin content in the air

  • GB/T 38214-2019 Test method of inert gas concentration for insulating glass unit
  • GB/T 13277.6-2021 Compressed air—Part 6:Test methods for gaseous contaminant content
  • GB/T 38234-2019 Determination of fatty acid methyl esters (FAME) in aviation turbine fuel—Gas chromatography-mass spectrometry

未注明发布机构, Tin content in the air

  • GJB 2373-1995 Monitoring method for hydrazine propellant content in air
  • BS ISO 13964:1998(1999) Air quality — Determination of ozone in ambient air — Ultravioletphotometric method

Group Standards of the People's Republic of China, Tin content in the air

  • T/FSI 102-2023 Determination of Hydrogen Content in Hydrogen Silicone Oil by Headspace Gas Chromatography
  • T/BSM 0001-2023 Determination of hydrogen content in hydrogen water Headspace gas chromatographic method
  • T/CAQI 27-2017 Specification of indoor air quality for classroom of elementary and secondary school
  • T/SDAQI 031-2021 Determination of methanol content in liquefied petroleum gas by gas chromatography
  • T/SEA 003-2020 Indoor air quality requirements in primary and secondary schools

Professional Standard - Electricity, Tin content in the air

  • DL 423-1991 Determination of gas content in insulating oil Differential-vacuum-pressure method
  • DL/T 423-2009 Determination of dissolved gas content in insulatingoil.Method of vacuum pressure difference
  • DL/T 1824-2018 Method for the determination of acetone content in operating transformer oil by headspace gas chromatography
  • DL/T 703-1999 Determination of dissolved gas content in insulating oil by gas chromatography
  • DL/T 703-2015 Determination of dissolved gas content in insulating oil by gas chromatography

IX-SA, Tin content in the air

Yunnan Provincial Standard of the People's Republic of China, Tin content in the air

  • DB53/T 796-2016 Determination of Indium Content in Tin-rich Slag by Atomic Absorption Spectrometry

ES-UNE, Tin content in the air

  • UNE-EN 13615:2001 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
  • UNE-EN 13615:2001/AC:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry (Endorsed by AENOR in February of 2003.)
  • UNE-EN ISO 4496:2018 Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders (ISO 4496:2017)
  • UNE-CEN/TS 17660-1:2021 Air quality - Performance evaluation of air quality sensor systems - Part 1: Gaseous pollutants in ambient air (Endorsed by Asociación Española de Normalización in February of 2022.)

Professional Standard - Forestry, Tin content in the air

  • LY/T 1221-1999 Determination of carbon dioxide content in forest soil air

NL-NEN, Tin content in the air

  • NEN 5961-1988 Concrete - Determination of air content of fresh concrete (displacement method)
  • NEN 2037-1982 Air quality — Reference method for the determination of ozone in air — Photometric determination after absorption in potassium iodide thiosulphate solution
  • NEN 2785-1990 Air quality - Ambient air - Collection of particulate matter for the determination of the content of metals - HVS-method
  • NEN 2789-1983 Air quality - Ambient air - Photometric determination of ozone content with indigo disulphonate
  • NEN-ISO 4496:1993 Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
  • NEN 2044-1985 Air quahty - txhaust gases Wet chemical determination of nitrogen oxides content

ES-AENOR, Tin content in the air

FI-SFS, Tin content in the air

National Health Commission of the People's Republic of China, Tin content in the air

  • GB 5009.215-2016 National Food Safety Standards Determination of Organotin Content in Food

Professional Standard - Commodity Inspection, Tin content in the air

  • SN/T 3149-2012 Determination of fentin and fenbutatin oxide residues in food for export.Gas chromatography-mass spectrometry method
  • SN/T 1990-2007 Determination of azocyclotin and cyhexatin residues in food for import and export.GC-MS method
  • SN/T 2268-2009 Determination of organic volatiles in enameled wire.Headspace.GC-MS method

IN-BIS, Tin content in the air

工业和信息化部, Tin content in the air

  • HG/T 5016-2016 Determination method of fluorine content in fluorine-containing waste gas

BR-ABNT, Tin content in the air

  • ABNT NBR 16887-2020 Concrete - Determination of air content of freshly mixed concrete - Pressure method

Guangdong Provincial Standard of the People's Republic of China, Tin content in the air

  • DB44/T 1031-2012 Determination of Methanol Content in Pulping Waste Liquid by Headspace Gas Chromatography
  • DB44/T 1030-2012 Determination of Carboxylic Acid Group Content in Pulp by Headspace Gas Chromatography
  • DB44/T 1157-2013 Determination of Oxalate Content in Pulp Bleaching Wastewater by Headspace-Gas Chromatography
  • DB44/T 1027-2012 Determination of Carbonate Content in Alkali Pulping Black Liquor by Headspace Gas Chromatography
  • DB44/T 1158-2013 Determination of Residual Hydrogen Peroxide Content in Pulp Bleaching Wastewater by Headspace-Gas Chromatography

VN-TCVN, Tin content in the air

  • TCVN 5293-1995 Air quality.Indophenol method for determination of ammonia content
  • TCVN 5067-1995 Air quality.Weight method for determination of suspended dusts content
  • TCVN 5968-1995 Air quality.Determination of gaseous sulphur compounds in ambient air.Sampling equipment
  • TCVN 7171-2002 Air quality.Determination of ozone in ambient air.Ultraviolet photometric method

Hunan Provincial Standard of the People's Republic of China, Tin content in the air

  • DB43/T 1652-2019 Determination of Calcium Carbonate Content in Tissue Paper by Headspace Gas Chromatography
  • DB43/T 1646-2019 Indoor air quality requirements for primary and secondary schools

International Organization for Standardization (ISO), Tin content in the air

  • ISO 4496:1978 Metallic powders; Determination of acid insoluble content in iron, copper, tin and bronze powders
  • ISO 4496:2017 Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders
  • ISO/DIS 7383-1:2023 Fine bubble technology — Evaluation method for determining gas content in ultrafine bubble dispersions in water — Part 1: Oxygen content
  • ISO 11454:1997 Tobacco and tobacco products - Determination of vapour-phase nicotine in air - Gas-chromatographic method
  • ISO 8573-2:2018 Compressed air - Contaminant measurement - Part 2: Oil aerosol content
  • ISO 16000-3:2011 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method
  • ISO 4219:1979 Air quality; Determination of gaseous sulphur compounds in ambient air; Sampling equipment
  • ISO 5221:1984 Air distribution and air diffusion; Rules to methods of measuring air flow rate in an air handling duct
  • ISO 16000-34:2018 Indoor air - Part 34: Strategies for the measurement of airborne particles

Society of Automotive Engineers (SAE), Tin content in the air

  • SAE AS22759/13-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, MEDIUM WEIGHT, TIN-COATED COPPER CONDUCTOR, 600-VOLT
  • SAE AS22759/13A-2020 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, MEDIUM WEIGHT, TIN-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
  • SAE AS22759/13B-2021 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, MEDIUM WEIGHT, TIN-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
  • SAE AS22759/16-2008 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, MEDIUM WEIGHT, TIN-COATED COPPER CONDUCTOR, 600-VOLT, 150°C
  • SAE AS81044/9-2004 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER, MEDIUM WEIGHT, 600-VOLT, 150°C
  • SAE AS81044/9A-2022 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER, MEDIUM WEIGHT, 600 VOLT, 150 °C
  • SAE AS22759/16A-2019 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED ETFE, MEDIUM WEIGHT, TIN-COATED COPPER CONDUCTOR, 600-VOLT, 150 °C, ROHS
  • SAE AIR4766-2007 Air Quality for Commercial Aircraft Cabins

Standard Association of Australia (SAA), Tin content in the air

  • AS 1012.4.3:1999 Methods of testing concrete - Determination of air content of freshly mixed concrete - Measuring air volume when concrete dispersed in water
  • AS 1012.4.3:2014 Methods of testing concrete, Method 4.3: Determination of air content of freshly mixed concrete — Measuring air volume when concrete is dispersed in water
  • AS 3980:1999 Guide to the determination of gas content of coal - Direct desorption method

Professional Standard - Energy, Tin content in the air

  • NB/SH/T 0707-2016 Determination of Benzene and Toluene in Paraffin Waxes by Headspace Injection Gas Chromatography

Professional Standard - Petrochemical Industry, Tin content in the air

  • SH/T 0707-2001 Determination of benzene and toluene in petroleum waxes using headspace gas chromatography with flame ionization detection
  • SH/T 0713-2002 Standard test method for determination of benzene and toluene in finished motor and aviation gasoline by gas chromatography
  • SH/T 0021-1990 Determination method of naphthenic acid soap in jet fuel

KR-KS, Tin content in the air

  • KS F 2449-2022 Test method for air content of fresh concrete by the volumetric method
  • KS I ISO 13138-2020 Air quality — Sampling conventions for airborne particle deposition in the human respiratory system
  • KS I ISO 4219-2017 Air quality-Determination of gaseous sulphur compounds in ambient air-Sampling equipment
  • KS I ISO 4219-2022 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment

国家能源局, Tin content in the air

  • SH/T 0707-2016 Determination of benzene and toluene content in paraffin wax by headspace sampling gas chromatography
  • SY/T 7507-2016 Determination of water content in natural gas by electrolysis method

International Truck and Engine Corporation (ITEC), Tin content in the air

SAE - SAE International, Tin content in the air

  • SAE AS22759/13A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, MEDIUM WEIGHT, TIN-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
  • SAE AS22759/13-2000 WIRE@ ELECTRIC@ FLUOROPOLYMER-INSULATED@ FEP-PVF2@ MEDIUM WEIGHT@ TIN-COATED COPPER CONDUCTOR@ 600-VOLT
  • SAE AS81044/9A-2011 WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, TIN-COATED COPPER, MEDIUM WEIGHT, 600 VOLT, 150 °C
  • SAE AS22759/16A-2015 "WIRE@ ELECTRIC@ FLUOROPOLYMER-INSULATED@ EXTRUDED ETFE@ MEDIUM WEIGHT@ TIN-COATED COPPER CONDUCTOR@ 600-VOLT@ 150°C,"
  • SAE AS22759/16-2001 "WIRE@ ELECTRIC@ FLUOROPOLYMER-INSULATED@ EXTRUDED ETFE@ MEDIUM WEIGHT@ TIN-COATED COPPER CONDUCTOR@ 600-VOLT@ 150°C,"

American National Standards Institute (ANSI), Tin content in the air

American Society for Testing and Materials (ASTM), Tin content in the air

  • ASTM D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
  • ASTM D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
  • ASTM C231/C231M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-97e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231/C231M-22 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-08 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-08a Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-08b Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-08c Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-09 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-09a Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM E649-00(2011) Standard Test Method for Bromine in Chlorine
  • ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
  • ASTM C231-04 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-03 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231/C231M-09b Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C185-99 Standard Test Method for Air Content of Hydraulic Cement Mortar
  • ASTM C185-19 Standard Test Method for Air Content of Hydraulic Cement Mortar
  • ASTM C185-20 Standard Test Method for Air Content of Hydraulic Cement Mortar
  • ASTM C185-08 Standard Test Method for Air Content of Hydraulic Cement Mortar
  • ASTM D2913-96 Standard Test Method for Mercaptan Content of the Atmosphere
  • ASTM D2913-96(2007) Standard Test Method for Mercaptan Content of the Atmosphere
  • ASTM D2913-96(2001)e1 Standard Test Method for Mercaptan Content of the Atmosphere
  • ASTM D2913-20 Standard Test Method for Mercaptan Content of the Atmosphere
  • ASTM D2913-14 Standard Test Method for Mercaptan Content of the Atmosphere
  • ASTM C231/C231M-14 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM D2685-95(2003) Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
  • ASTM D2685-11 Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography

Inner Mongolia Provincial Standard of the People's Republic of China, Tin content in the air

  • DB15/T 3075-2023 Determination Method of Harmful Microorganisms in the Air of Large-scale Sheep Farms

RU-GOST R, Tin content in the air

  • GOST 30550-1998 Metallic of powders. Determination of acid-insoluble content in iron, copper, tin and bronze powders
  • GOST 32527-2013 Mineral nitrogen-containing substances. Determination in air and water
  • GOST ISO 24557-2015 Pulses. Determination of moisture content. Air-oven method

CL-INN, Tin content in the air

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Tin content in the air

中华人民共和国国家卫生和计划生育委员会, Tin content in the air

  • GBZ/T 192.4-2007 Determination of dust in the air of workplace. Part 4:Content of free silica in dust

Professional Standard - Agriculture, Tin content in the air

  • SN/T 5053-2018 Determination of Arsenic, Mercury, Selenium, Tin and Bismuth in Antimony Concentrates by Hydride Atomic Fluorescence Spectrometry

The American Road & Transportation Builders Association, Tin content in the air

(U.S.) Ford Automotive Standards, Tin content in the air

International Federation of Trucks and Engines, Tin content in the air

Professional Standard - Petroleum, Tin content in the air

  • SY/T 7507-1997 Determination of water in natural gas-Electrolytic method

Professional Standard - Machinery, Tin content in the air

  • JB/T 6647-1993 Determination of total carbon content in carbide Gas volumetric method
  • JB/T 6647-2011 The gas-volumetric method after combustion in the pipe furnace for the determination of total carbon content.Method for chemical analysis of carbonate

SG-SPRING SG, Tin content in the air

  • SS 78 Pt.A6-1987 Testing Concrete Part A6: Methods For Determination Of Air Content Of Fresh Concrete

Anhui Provincial Standard of the People's Republic of China, Tin content in the air

  • DB34/T 2086-2014 Determination method of N-methylpyrrolidone content in lubricating oil by headspace gas chromatography
  • DB34/T 3690-2020 Determination of carbon dioxide and nitrogen content in liquefied petroleum gas

Professional Standard - Environmental Protection, Tin content in the air

GOSTR, Tin content in the air

Military Standard of the People's Republic of China-General Armament Department, Tin content in the air

  • GJB 311-1987 Determination of wear metal content in aviation lubricants

Association of German Mechanical Engineers, Tin content in the air

  • VDI 4280 Blatt 4-2009 Planning of ambient air quality measurements - Substitution of missing values in series of measured values of ambient air quality

IT-UNI, Tin content in the air

TR-TSE, Tin content in the air

  • TS 2901-1977 (DETERMINATION OF AIR CONTENT OF FRESH CONCRETE BY THE PRESSURE METHOD)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved