ZH
RU
ES

molecular weight

molecular weight, Total:499 items.

In the international standard classification, molecular weight involves: Rubber, Crude petroleum, Petroleum products in general, Medical equipment, Plastics, Rubber and plastics products, Products of the textile industry, Textile fibres, Reinforced plastics, Protection against dangerous goods, Installations in buildings, Mining equipment, Environmental protection, Waxes, bituminous materials and other petroleum products, Fishing and fish breeding, Raw materials for rubber and plastics, Fuels, Water quality, Organic chemicals, Equipment for the chemical industry, Continuous handling equipment, Storage equipment, Bridge construction, Analytical chemistry, Materials for aerospace construction, Fertilizers, Fluid power systems, Extraction and processing of petroleum and natural gas, Air quality, Products of the chemical industry, Insulating fluids, Construction industry, Photography, Lubricants, industrial oils and related products, Construction materials, Beverages, Farming and forestry, Thermodynamics and temperature measurements, Physics. Chemistry, Soil quality. Pedology, Equipment for petroleum and natural gas industries.

Professional Standard - Commodity Inspection, molecular weight

SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method
SN/T 2492-2010 Determination of molecular weight of liquefied petroleum gas- Gas chromatography
SN/T 3600-2013 Determination of residual monomers and other volatile low-molecular-mass compounds in raw rubber.Dynamic headspace-gas chromatography method

Professional Standard - Chemical Industry, molecular weight

HG/T 4787-2014 Middle molecular polyisobutylene
HG/T 4375-2012 Modified material of ultra-high molecular weight polyethylene for pipe lining
HG/T 4744-2014 Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC
HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

Society of Automotive Engineers (SAE), molecular weight

SAE AMS3728-2011 EPOXY CRESOL NOVOLAC RESIN Low Molecular Weight
SAE AMS3728A-2022 Epoxy Cresol Novolac Resin Low Molecular Weight
SAE AMS3728A-1994 Epoxy Cresol Novolac Resin Low Molecular Weight

Military Standard of the People's Republic of China-General Armament Department, molecular weight

GJB 1965-1994 Determination of molecular weight and molecular weight distribution of hydroxyl-terminated polybutadiene by gel permeation chromatography
GJB 1059.6-2020 Test methods for phenolic resins for ablative materials Part 6: Molecular weight and distribution testing

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, molecular weight

GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 29554-2013 Ultra high molecular weight polyethylene fibre
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene.High performance size-exclusion chromatography
GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
GB/T 32679-2016 Ultra-high-molecular-weight polyethylene (PE-UHMW) resin
GB/T 36214.2-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 2:Universal calibration method
GB/T 12005.10-1992 Determination for molecular weight of polyacrylamide by viscometry
GB/T 23961-2009(英文版) Determination of low molecular weight aliphatic amines—Gas chromatographic method
GB/T 19701.1-2005 Implants for surgery-Ultra-high molecular weight polyethylene part 1:Powder form
GB/T 19701.1-2016 Implants for surgery.Ultra-high-molecular-weight polyethylene.Part 1:Powder form
GB/T 19701.2-2005 Implants for surgery Ultra-high molecular weight polyethylene-part 2:Moulded forms
GB/T 19701.2-2016 Implants for surgery.Ultra-high-molecular-weight polyethylene.Part 2: Moulded forms
GB/T 27843-2011 Chemicals.Determination of the low molecular weight content of a polymer using Gel permeation chromatography (GPC)
GB/T 31816-2015 Water treatment chemicals.Determination of the molecular weight and molecular weight distribution of polymers.Gel filtration chromatography
GB/T 13530.3-1992 Sodium ethoxylated alkyl sulfate--Determination of the mean relative molecular mass
GB/T 5177.3-1985 Determination of mean relative molecular mass for industrial alkylbenzene--Gas-liquid chromatographic method
GB/T 30668-2014 Ultra high molecular weight polyethylene fibre 8-strand braided ropes, 12-strand braided ropes and covered ropes
GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB 6598-1986 Determination of Weight Average Molecular Weight of Polystyrene Standard Samples by Small Angle Laser Light Scattering Method
GB/T 30787-2014 Binder Resin applied in digital printing materials.The determination average molecular weight and its distribution.Gel permeation chromatography
GB/T 5178-1985 Determination of mean relative molecular mass for technical straight-chain sodium alkyl benzene sulphonates--Gas-liquid chromatographic method
GB/T 11988-1989 Surface active agent--Technical alkane sulfonates--Determination of mean relative molecular mass and content of alkane monosulfonates
GB/T 21461.1-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 1:Designation system and basis for specifications
GB/T 21461.2-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties

American Society for Testing and Materials (ASTM), molecular weight

ASTM D2502-04 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6579-00 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-92(1996) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-12 adjunct(2020) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D6579-11(2020) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D2502-92(2002) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM F2759-11 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
ASTM D6579-11 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D3973-85(2003) Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
ASTM UOP676-84 Molecular Weight by Vapor Pressure Osmometry
ASTM D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM D3536-91 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
ASTM D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM UOP375-07 Calculation of UOP Characterization Factor and Estimation of Molecular Weight of Petroleum Oil
ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D5675-13 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM F2848-21 Standard Specification for Medical-Grade Ultra-High-Molecular-Weight Polyethylene Yarns
ASTM D3973-85(2011) Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
ASTM D5675-13(2018) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D5675-13(2023) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM F2003-00 Standard Guide for Accelerated Aging of Ultra-High Molecular Weight Polyethylene
ASTM D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM D3973-85(1995)e1 Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
ASTM D3973-85(2017) Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
ASTM D6579-11(2015) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM UOP375-86 Calculation of UOP Characterization Factor and Estimation of Molecular Weight of Petroleum Oils
ASTM F2848-10 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
ASTM F2848-16 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
ASTM F2848-17 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
ASTM E1343-90(2001) Standard Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes
ASTM D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration
ASTM E1343-90(1997)e1 Standard Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes
ASTM D7134-05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM D6712-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM D4020-05 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D4020-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D4020-01a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D4020-00a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D4020-11 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM D2878-21 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D6579-06 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D2878-95(2005) Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
ASTM D2878-10 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D2878-10(2016) Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM F648-10a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F648-14 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM D2878-95 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM F648-10 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F648-00e1 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F648-00 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F2214-02(2008) Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
ASTM F2214-16 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
ASTM F2759-19 Standard Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
ASTM D5222-23 Standard Specification for Less Flammable High Molecular Weight Hydrocarbon Mineral Electrical Insulating Liquids
ASTM F648-21 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F2214-02 Standard Test Method forIn Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
ASTM F648-04 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F648-07e1 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F648-07 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F2759-09 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
ASTM F3336-22 Standard Practice for Lipid Preconditioning of Ultra-High-Molecular-Weight Polyethylene for Accelerated Aging
ASTM F2003-02(2022) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene After Gamma Irradiation in Air
ASTM F2003-02(2015) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
ASTM F648-13 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM F2214-23 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
ASTM F2565-13 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
ASTM F2102-06e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2102-06 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2102-01 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2102-01e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM F2565-06 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
ASTM F2625-10 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F2565-21 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
ASTM F2695-07 Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications

国家药监局, molecular weight

YY/T 1678-2019 Method for detecting molecular weight and molecular weight distribution of polylactic acid and its copolymers for surgical implants
YY/T 0811-2021 Standard guide for extensively irradiation.Crosslinked ultra-high molecular weight polyethylene fabricated forms for surgical implant applications

Professional Standard - Petrochemical Industry, molecular weight

SH/T 0108-1992 Determination of average molecular weight and molecular weight distribution of certain polymeric additives (Size Exclusion Chromatography)
SH/T 0398-2007 Standard test method for molecular weight of petrolemn wax and petrolatum
SH/T 0398-1992 Petroleum Wax and Petroleum Fat Molecular Weight Determination
SH/T 0730-2004 Estimation of molecular weigh (relative molecular mass) of petroleum oils from viscosity measurements
SH/T 1759-2007 Determinaaonof the molecular.mass distribution of solution polpners by gel permeation chromatography
SH/T 0583-1994 Determination of relative molecular weight of hydrocarbons (thermoelectric measurement of vapor pressure method)
SH/T 0169-1992 Methods of measurement for the average molecular weight of mineral insulating oil (depression of freezing point)
SH/T 1836-2023 Plastics - Determination of the melt volume-flow rate (MVR) of ultra-high molecular weight polyethylene (PE-UHMW)

Professional Standard - Light Industry, molecular weight

QB/T 2668.2-2017 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipe fittings
QB/T 2668-2004 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes
QB/T 2668.1-2017 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes

Professional Standard - Textile, molecular weight

FZ/T 63028-2015 Ultra-high molecular weight polyethylene netting twine
FZ/T 54027-2010 Ultra-high molecular weight polyethylene (UHMWPE) filament yarns
FZ/T 54027-2022 UHMWPE Filament
FZ/T 54129-2020 Colored UHMWPE Filament
FZ/T 54056-2012 Ultra-high molecular weight polyethylene (UHMWPE) /nano-carbon tube filament yarns
FZ/T 54102-2018 UHMWPE Filament for Cut Resistant Gloves
FZ/T 50025-2014 Test method for abrasion performance of UHMWPE filament yarns

GM North America, molecular weight

GM GMP.POM.012-1989 Acetal - High Molecular Weight Copolymer
GM GMP.PE.050-1991 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.062-2001 Polyethylene - High Density, High Molecular Weight
GM GMP.PMMA.007-1998 Acrylic - Exterior Lenses, High Molecular Weight
GM GM6419M-2001 Performance Requirements of Ultra High Modecular Weight Polyethlene (UHMW PE) Tape
GM GMP.PE.051-1998 Polyethylene - Ultra High Molecular Weight, Ram Extrusion/Compression Molded Grade
GMP.PMMA.007-2010 Acrylic - Exterior Lenses, High Molecular Weight Issue 3; Do Not Use on New Programs; Replaced by GMW16335
GM6419M-2011 Performance Requirements of Ultra High Molecular Weight Polyethylene (UHMW PE) Tape Issue 3; Do Not Use on New Programs; No Replacement

Henan Provincial Standard of the People's Republic of China, molecular weight

DB41/T 893-2014 UHMWPE sheet

国家市场监督管理总局、中国国家标准化管理委员会, molecular weight

GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
GB/T 40169-2021 Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD)

British Standards Institution (BSI), molecular weight

BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
BS ISO 16014-4:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-3:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 16014-1:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. General principles
BS EN ISO 16014-5:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Light-scattering method
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Method using light-scattering detection
BS ISO 16014-2:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Universal calibration method
BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 5834-1:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Powder form
BS ISO 5834-2:2009 Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
BS ISO 5834-2:2011 Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS 3762-3.24:1988 Analysis of formulated detergents - Quantitative test methods - Method for determination of low molecular mass alcohols content
BS ISO 5834-3:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Accelerated ageing methods
BS ISO 5834-4:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Oxidation index measurement method
BS ISO 5834-1:2019 Implants for surgery. Ultra-high-molecular-weight polyethylene - Powder form
BS ISO 5834-5:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Morphology assessment method
BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
BS 3762 Sec.3.24:1988 Analysis of formulated detergents. Quantitative test methods. Method for determination of low molecular mass alcohols content
BS ISO 5834-2:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
BS EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - High-molecular-mass cationic-active matter
BS ISO 5834-3:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Accelerated ageing methods
BS ISO 5834-5:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Morphology assessment method
BS ISO 5834-4:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Oxidation index measurement method
BS EN ISO 11542-2:1999 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 21304-1:2019 Tracked Changes. Plastics. Ultra-high-molecular-weight polyethylene (PE- UHMW) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 21304-2:2021 Plastics. Ultra-high-molecular-weight polyethylene (PE- UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Cationic-active matter of low molecular mass (between 200 and 500)

International Organization for Standardization (ISO), molecular weight

ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
ISO 16014-1:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-5:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
ISO 16014-2:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
ISO 16014-1:2003/Cor 1:2005 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles; Technical Corrigendum 1
ISO 16014-4:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16014-4:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method
ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
ISO 16014-2:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 16014-2:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method
ISO 5834-1:1998 Implants for surgery - Ultra-high molecular weight polyethylene - Part 1: Powder form
ISO 5834-1:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form
ISO 5834-2:1985 Implants for surgery — Ultra-high molecular weight polyethylene — Part 2: Moulded forms
ISO 5834-1:1985 Implants for surgery — Ultra-high molecular weight polyethylene — Part 1: Powder form
ISO 5834-2:2011 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms
ISO 5834-2:1998 Implants for surgery - Ultra-high molecular weight polyethylene - Part 2 : Moulded forms
ISO 5834-2:2006 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms
ISO 5834-2:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms
ISO 5834-1:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 5834-3:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3: Accelerated ageing methods
ISO 5834-4:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method
ISO 5834-5:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5: Morphology assessment method
ISO 5834-3:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods
ISO 5834-4:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 4: Oxidation index measurement method
ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 5834-5:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method
ISO 5834-1:2005/cor 1:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form; Technical Corrigendum 1
ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 11542-1:1994 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 21304-1:2019 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
ISO 11542-2:1998 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 11542-1:1994/Amd 1:1996 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications — Amendment 1

American National Standards Institute （ANSI), molecular weight

ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)
ANSI/ASTM D6712:2001 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ANSI/ASTM D4020:2001 Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials (08.02)
ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

Professional Standard - Urban Construction, molecular weight

CJ/T 320-2009 UItrahigh molecular weight polyethylene composite pipe
CJ/T 427-2013 Ultra-high molecular weight polyethylene sheet composite pipe
CJ/T 323-2015 Steel wire reinforced ultra-high molecular weight polyethylene composite pipe

Group Standards of the People's Republic of China, molecular weight

T/FSI 035-2019 Ultra-high molecular weight polytetrafluoroethylene resin
T/HEBQIA 056-2022 Ultra High Molecular Weight Polyethylene (UHMW-PE) Roller
T/SHXCL 000002-2019 Waterborne nanoscale narrow-band polymerized acrylic resin
T/CPCIF 0059-2020 Ultra-high molecular weight polyethylene for fiber spinning
T/ZZB 1957-2020 Low line density ultra-high molecular weight polyethylene filament yarns
T/YNSX 9-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Inspection Well
T/CASME 480-2023 High molecular weight styrene - maleic anhydride copolymers
T/YNSX 009-2022 High Molecular Weight High Density Polyethylene (HMWHDPE) Inspection Well
T/SOFIDPA 0005-2023 Fermentation process specifications for producing ultra-high molecular weight polyglutamic acid
T/CPCIF 0046-2020 Steel-lined ultrahigh molecular weight polyethylene pipe for metal mines
T/YNSX 5-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Double Wall Corrugated Pipe
T/DYZL 25-2021 Temperature resistant and instant high molecular weight polyacrylamide for oil displacement
T/QGCML 1337-2023 Ultra-high molecular weight polyethylene anti-static sintered plate filter element
T/YNSX 005-2022 High molecular weight high density polyethylene (HMWHDPE) double wall corrugated pipe
T/SHXCL 0017-2022 Ultra-high-molecular-weight polyethylene (PE-UHMW) resin for joint replacements
T/ZZB 1184-2019 Ultra high molecular weight polyethylene fiber rope for offshore lifting
T/CECS 10189-2022 Concrete Water Reducer Molecular Weight Test Gel Permeation Chromatography
T/YNSX 003-2022 High molecular weight high density polyethylene (HMWHDPE) hollow structural wall composite pipe
T/CAMDI 076-2022 Gel chromatography method for molecular weight and distribution of polysulfone specialty for medical devices
T/YNSX 6-2020 High Molecular Weight High Density Polyethylene (HMWHDPE) Double Wave Wound Structural Wall Pipe
T/YNSX 3-2020 High molecular weight high density polyethylene (HMWHDPE) hollow winding structure wall composite pipe
T/FSI 052-2020 Method for Determination of Molecular Weight of Methyl Vinyl Silicone Rubber - Mooney Viscosity Method
T/YNSX 010-2022 Large diameter high molecular weight high density polyethylene (HMWHDPE) plastic steel wound drainage pipe
T/CAMDI 079-2022 Standard guide for extensively irradiation-crosslinked ultra-high molecular weight polyethylene fabricated form for surgical implant applications
T/SHXCL 0005-2020 Technical specification for green-design product evaluation— Ultra-high-molecular-weight polyethylene(PE-UHMW) resin
T/CECS 10143-2021 High Molecular Weight High Density Polyethylene (HMWHDPE) Dual-Crest Winding Structure Wall Drain Pipe
T/YNSX 10-2020 Large diameter high molecular weight high density polyethylene (HMWHDPE) plastic steel winding drainage pipe
T/YNSX 004-2022 Galvanized steel strip reinforced high molecular weight high density polyethylene (HMWHDPE) spiral corrugated pipe
T/CSCA 110049-2020 “Shanghai Brand”certification criteria: Ultra-high-molecular-weight polyethylene resin for spinning
T/YNSX 4-2020 Galvanized steel strip reinforced high molecular weight high density polyethylene (HMWHDPE) two-color spiral corrugated pipe
T/CECS 10144-2021 High molecular weight high-density polyethylene (HMWHDPE) hollow plastic-steel composite winding structure wall drainage pipe
T/YNSX 006-2022 High molecular weight high density polyethylene (HMWHDPE) double crest reinforced reinforced winding structure wall drainage pipe
T/CPCIF 0060-2020 Ultra-high molecular weight polyethylene (PE-UHMW) and high-density polyethylene (PE-HD) for wet process lithium ion battery separator
T/YNSX 7-2020 Large-diameter high molecular weight high-density polyethylene (HMWHDPE) hollow plastic-steel composite winding structure wall pipe
T/CECS 994-2022 High molecular weight high density polyethylene (HMWHDPE) winding structure wall buried drainage pipeline engineering technical regulations
T/YNSX 007-2022 Large diameter high molecular weight high density polyethylene (HMWHDPE) hollow plastic steel composite winding structural wall drainage pipe

Japanese Industrial Standards Committee (JISC), molecular weight

JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-5:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
JIS K 6936-1:2007 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6936-2:2007 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6936-2:1999 Plastics -- Ultra-high-molecular weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 3850:1995 Measuring method for airborne fibrous particles
JIS K 6936-1:1999 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specification

RU-GOST R, molecular weight

GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography
GOST R 57268.1-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General principles
GOST R 57268.2-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. System calibration
GOST R 57268.3-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperature method
GOST R 57268.4-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
GOST R ISO 5834-2-2014 Implants for surgery. Ultra-high- molecular-weight polyethylene. Part 2. Moulded forms
GOST R ISO 5834-1-2015 Implants for surgery. Ultrahigh-molecular-weight polyethylene. Part 1. Powder form
GOST R ISO 5834-3-2014 Implants for surgery. Ultra-high- molecular-weight polyethylene. Part 3. Accelerated ageing methods
GOST R ISO 5834-4-2015 Implants for surgery. Ultra-high molecular weight polyethylene. Part 4. Oxidation index measurement method
GOST 33402-2015 Testing of chemicals of environmental hazard. Determination of the low molecular weight content of a polymer using gel permeation chromatography

Association Francaise de Normalisation, molecular weight

NF EN ISO 16014-5:2019 Plastiques - Détermination de la masse moléculaire moyenne et de la distribution des masses moléculaires de polymères par chromatographie d'exclusion stérique - Partie 5 : méthode par diffusion lumineuse
NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
NF T51-240-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5 : method using light-scattering method.
NF EN ISO 10927:2018 Plastiques - Détermination de la masse moléculaire et de la distribution des masses moléculaires des polymères par spectrométrie de masse, à temps de vol, après désorption/ionisation laser assistée par matrice (SM-MALDI-TOF)
NF S94-060-1:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1 : powder form.
NF S94-060-1*NF ISO 5834-1:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1 : powder form
NF S94-060-2:2006 Implants for surgery - Ultra-high molecular-weight polyethylene - Part 2 : moulded forms.
NF S94-060-2*NF ISO 5834-2:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2 : moulded forms
NF ISO 5834-2:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 2 : produits sous forme moulée
NF S94-060-5:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5 : morphology assessment method.
NF ISO 5834-1:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 1 : produits sous forme de poudre
NF EN ISO 2871-1:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 1 : matière active cationique à haute masse moléculaire
NF S94-060-4:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Part 4 : oxidation index measurement method.
NF S94-060-3:2006 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3 : accelerated ageing methods.
NF S94-060-5*NF ISO 5834-5:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5 : morphology assessment method
NF S94-060-3*NF ISO 5834-3:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3 : accelerated ageing methods
NF ISO 5834-5:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 5 : méthode d'évaluation de la morphologie
NF ISO 5834-3:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 3 : méthodes de vieillissement accéléré
NF S94-060-4*NF ISO 5834-4:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4 : oxidation index measurement method
NF ISO 5834-4:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 4 : méthode de mesurage de l'indice d'oxydation
NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
NF EN ISO 2871-2:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 2 : matière active cationique à faible masse moléculaire (entre 200 et 500)
NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
NF T73-241*NF ISO 6843:1988 Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Estimation of the mean relative molecular mass.
NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
NF T73-321:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
NF T73-239*NF ISO 6841:1988 Surface active agents. Technical straight-chain sodium alkylbenzenesulfonates. Determination of mean relative molecular mass by gas-liquid chromatography.
NF T51-230-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1 : designation system and basis for specifications.
NF T51-230-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF EN ISO 21304-1:2019 Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications

German Institute for Standardization, molecular weight

DIN EN ISO 16014-5:2019-09 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
DIN EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
DIN ISO 5834-2:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2006) English version of DIN ISO 5834-2:2007-12
DIN ISO 5834-2:2020-07 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2019)
DIN ISO 5834-1:2020-07 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2019)
DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
DIN ISO 5834-1:2007 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2005);English version of DIN ISO 5834-1:2007-06
DIN ISO 5834-2:2014 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2011)
DIN ISO 5834-2:2020 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2019)
DIN ISO 5834-1:2020 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2019)
DIN 55674:2006 Synthetic Polymers - Determination of molecular mass and molecular mass distribution of polymers by matrix assisted laser desorption/ionization-time-of-flight-mass spectrometry
DIN EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
DIN EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012); German version EN ISO 16014-5:2012
DIN EN ISO 2871-1:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
DIN EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011); German version EN ISO 10927:2011
DIN EN ISO 21304-1:2019-08 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019); German version EN ISO 21304-1:2019
DIN EN ISO 2871-2:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010); German version EN ISO 2871-2:2010
DIN EN ISO 21304-2:2021-04 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021); German version EN ISO 21304-2:2021
DIN EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)

ES-UNE, molecular weight

UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
UNE-EN ISO 21304-1:2020 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)
UNE-EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

API - American Petroleum Institute, molecular weight

API SYNTHESIS-46-1946 THE SYNTHESIS AND PROPERTIES OF HYDROCARBONS OF HIGH MOLECULAR WEIGHT-IV
API 4026-1967 HIGH MOLECULAR WEIGHT COMPOUNDS IN VEHICLE EXHAUST: STATE-OF-THE-ART
API 951-1967 PROPERTIES OF HYDROCARBONS OF HIGH MOLECULAR WEIGHT SYNTHESIZED BY RESEARCH PROJECT 42 OF THE AMERICAN PETROLEUM INSTITUTE

农业农村部, molecular weight

SC/T 5022-2017 Ultra high molecular weight polyethylene mesh warp knitted type
SC/T 4049-2019 Ultra-high molecular weight polyethylene mesh twisted type
NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)
SC/T 4046-2019 General technical conditions for fishing ultra-high molecular weight polyethylene mesh lines
NY/T 1860.36-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 36: Determination of Low Molecular Weight Components of Polymers (Gel Permeation Chromatography)
NY/T 3252.2-2018 Industrial Hemp Seeds Part 2: Seed Quality

Korean Agency for Technology and Standards (KATS), molecular weight

KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS K 3102-2007 Test methods for molecular weight cutoff of hollow fiber ultrafiltration membrane
KS K 3102-2017 Test methods for molecular weight cutoff of hollow fiber ultrafiltration membrane
KS K 3102-2017(2022) Test methods for molecular weight cutoff of hollow fiber ultrafiltration membrane
KS P ISO 5834-2:2012 Implants for surgery－Ultra-high molecular weight polyethylene－Part 2：Moulded forms
KS P ISO 5834-1:2007 Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 1：Powder form
KS P ISO 5834-2-2012(2017) Implants for surgery－Ultra-high molecular weight polyethylene－Part 2：Moulded forms
KS P ISO 5834-1:2018 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
KS P ISO 5834-3:2008 Implants for surgery-Ultra-high-molecular-weight polyethylene-Part 3:Accelerated ageing methods
KS P ISO 5834-4:2007 Implants for surgery－Ultra-high molecular weight polyethylene－Part 4：Oxidation index measurement method
KS P ISO 5834-5:2007 Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 5：Morphology assessment method
KS P ISO 5834-5-2007(2017) Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 5：Morphology assessment method
KS P ISO 5834-3:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods
KS P ISO 5834-4-2007(2017) Implants for surgery－Ultra-high molecular weight polyethylene－Part 4：Oxidation index measurement method
KS M ISO 2871-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS M ISO 2871-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS M ISO 2871:2007 Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS M ISO 2871-2-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS M ISO 2871-2-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS M ISO 11542-1:2006 Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 6843:2008 Surface active agents-Sulfated ethoxylated alcohols and alkylphenols-Estimation of the mean relative molecular mass
KS M ISO 6843:2013 Surface active agents－Sulfated ethoxylated alcohols and alkylphenols－Estimation of the mean relative molecular mass
KS M ISO 11542-1-2006(2021) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 11542-2-2011(2021) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 11542-2-2011(2016) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 11542-1-2006(2016) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 11344-2017(2022) Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
KS M ISO 6841:2007 Surface N agents-Technical straight-chain sodium alkylbenzenesulfonates-Determination of mean relative molecular mass by gas-liquid chromatography
KS M ISO 11542-2:2011 Plastics-Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS F 2302-2002 Test method for particle size distribution of soils
KS M ISO 6845:2007 Surface N agents-Technical alkane sulfonates-Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content

Professional Standard - Aerospace, molecular weight

QJ 1870-1990 Epoxy resin molecular weight and its distribution test method (GPC method)

Hubei Provincial Standard of the People's Republic of China, molecular weight

DB42/T 1127-2015 Zero Additive UHMWPE Pipe

工业和信息化部, molecular weight

HG/T 5629-2019 Ultra-high molecular weight polyethylene lining board for chemical industry
HG/T 5225-2017 Antistatic halogen-free flame retardant ultra-high molecular weight polyethylene pipe lining special material
HG/T 6046-2022 General requirements for wear-resistant products made of injection molding grade ultra-high molecular weight polyethylene resin

未注明发布机构, molecular weight

BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
BS 3762-3.24:1988(2011) Analysis of formulated detergents — Part 3 : Quantitative test methods — Section 3.24 Methods for determination of low molecular mass alcohols content
BS EN ISO 11542-2:1998(2007) Plastics — Ultra - high - molecular - weight polyethylene (PE - UHMW) moulding and extrusion materials — Part 2 : Preparation oftest specimens and determination ofproperties

Danish Standards Foundation, molecular weight

DS/EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
DS/EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
DS/ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
DS/EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 11542-2/AC:2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 11542-2:1999 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

Universal Oil Products Company (UOP), molecular weight

UOP 375-2007 CALCULATION OF UOP CHARACTERIZATION FACTOR AND ESTIMATION OF MOLECULAR WEIGHT OF PETROLEUM OILS

Taiwan Provincial Standard of the People's Republic of China, molecular weight

CNS 7915-1981 Average Molecular Weight of Fatty Quaternary Ammonium Chlorides
CNS 13382-24-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 1:Powder form)
CNS 13382.24-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 1:Powder form)
CNS 13382-25-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 2:Moulded Form)
CNS 13382.25-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 2:Moulded Form)

KR-KS, molecular weight

KS P ISO 5834-2-2022 Implants for surgery — Ultra-high molecular weight polyethylene — Part 2: Moulded forms
KS P ISO 5834-1-2018 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
KS P ISO 5834-3-2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods
KS P ISO 5834-5-2022 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 5: Morphology assessment method
KS P ISO 5834-4-2022 Implants for surgery — Ultra-high molecular weight polyethylene — Part 4: Oxidation index measurement method
KS M ISO 11344-2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography

Indonesia Standards, molecular weight

SNI 19-7117.15-2009

GOSTR, molecular weight

GOST R 57268.5-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 5. Method using light-scattering detection
GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent

Lithuanian Standards Office , molecular weight

LST EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
LST EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
LST EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
LST EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
LST EN ISO 11542-1:2002 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)
LST EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

AENOR, molecular weight

UNE-EN ISO 16014-5:2013 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
UNE-EN ISO 10927:2012 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
UNE 55716:1983 SURFACE ACTIVE AGENTS. ANALYSIS OF TECHNICAL FATTY CHAIN QUATERNARY AMMONIUM CHLORIDES. DETERMINATION OF AVERAGE MOLECULAR WEIGHT
UNE-EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
UNE-EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

TH-TISI, molecular weight

TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method
TIS 1762.2-1999 Surface active agents.detergents.determination of cationic-active matter content.part 2 : cationic-active matter of low molecular mass (between 200 and 500)

Professional Standard - Medicine, molecular weight

YY/T 1431-2016 Implants for surgery.Medical-grade ultra-high molecular weight polyethylene yarns
YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene( UHMWPE)
YY/T 0772.3-2009 Implants for surgery Ultra-high-molecular-weight polyethylene.Part 3:Accelerated ageing methods
YY/T 0772.5-2009 Implants for surgery Ultra-high-molecular-weight polyethylene.Part 5:Morphology assessment method
YY/T 1430-2016 Standard test method for small punch testing of ultra-high molecular weight polyethylene used in surgical implants
YY/T 0772.4-2009 Implants for surgery Ultra-high-molecular-weight polyethylene.Part 4:Oxidation index measurement method
YY/T 0772.4-2022 Surgical Implants Ultra High Molecular Weight Polyethylene Part 4: Oxidation Index Test Method
YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry
YY/T 0811-2010 Standard guide for extensively irradiation.Crosslinked ultra-high molecular weight polyethylene fabricated forms for surgical implant applications

国家能源局, molecular weight

SH/T 1818-2017 Test method for abrasion of plastic ultra-high molecular weight polyethylene mortar

(U.S.) Ford Automotive Standards, molecular weight

FORD ESA-M4D369-A-2008 POLYETHYLENE, ULTRA HIGH MOLECULAR WEIGHT***TO BE USED WITH FORD WSS-M99P1111-A***

European Committee for Standardization (CEN), molecular weight

EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
EN ISO 2871-1:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 1: High - Molecular-Mass Cationic-Active Matter (ISO 2871-1:1988)
EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
EN ISO 11542-1:2001 Plastics - Ultra-High-Molecular-Weight Polythylene (PE-UHMW) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications

CZ-CSN, molecular weight

CSN 56 0210-12-1994 Testing methods of alcoholic bevereges. Determination of Methylalcohol, Esters, Aldehydes and Heigh Molecular Weight lcohols
CSN 56 0210 Cast.10-1986 Testing methods of alcoholic beverages. Determination of high molecular weight alcohols in brandy and wine distillate
CSN 80 0523-1974 Man-made fibres.Determination of pre-paralion contenl and low-moleeular parl on man-made fibres

U.S. Military Regulations and Norms, molecular weight

ARMY MIL-DTL-32398-2013 LAMINATE: CROSS-PLIED ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) UNIDIRECTIONALLY REINFORCED PLASTIC ARMOR

IN-BIS, molecular weight

IS 5347 Pt.10-1987

Professional Standard - Recommended Standards for Engineering Construction, molecular weight

CECS 306-2012 Construction and acceptance regulations of ultra-high molecular weight polyethylene steel skeleton composite pipe pipeline

TN-INNORPI, molecular weight

NT 14.36-1983

BE-NBN, molecular weight

NBN-EN ISO 2871-1:1995
NBN T 63-161-1988 Surface active agents - Technical straight-chain sodium alkylbenzene sulfonates - Determination of mean relative molecular mass by gas-liquid chromatography
NBN-ISO 6845:1990 Oppervlakactieve stoffen - Technische alkaansulfonaten - Bepaling van de gemiddelde relatieve moléculaire massa van de alkaanmonosulfonaten en van hun gehalte

HU-MSZT, molecular weight

VN-TCVN, molecular weight

TCVN 6335-1998 Surface active agents.Technical straight.chain sodium alkylbenzenesulfonates.Determination of mean relative molecular mass by gas.liquid chromatography

CEN - European Committee for Standardization, molecular weight

EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications

IT-UNI, molecular weight

UNI EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

国家食品药品监督管理局, molecular weight

YY/T 1507.2-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 2: Determination of chlorine (Cl) element content by ion chromatography

GM Global, molecular weight

GMW 16879-2013 Performance Requirements of Ultra High Molecular Weight Polyethylene (UHMW PE) Tape Issue 1; English [Replaced: GMNA GM6419M, GMNA GM6419M, GMNA GM6419M, GMNA GM6419M]

RO-ASRO, molecular weight

STAS 7459-1966

Guangxi Provincial Standard of the People's Republic of China, molecular weight

DB45/T 1954.1-2019 LMZ Part 1: Seed Quality

Professional Standard - Agriculture, molecular weight

98药典化学药和生物制品卷-2010 Chapter 1 Drugs for Nervous System Section 6 Drugs for Treatment of Cerebrovascular Diseases 1. Thrombolysis, Fibrinolysis, Anticoagulant Low Molecular Weight Heparin Sodium
99药典化学药和生物制品卷-2010 Chapter 1 Drugs for Nervous System Section 6 Drugs for Treatment of Cerebrovascular Diseases 1. Thrombolysis, Defibrosis, Anticoagulant Low Molecular Weight Heparin Calcium
605药典化学药和生物制品卷-2010 Chapter 8 Medications for the Blood System Section 3 Anticoagulant Drugs, Antiplatelet Drugs and Thrombolytic Drugs 1. Anticoagulant Drug Low Molecular Weight Heparin

Inner Mongolia Provincial Standard of the People's Republic of China, molecular weight

DB15/T 2899.1-2023 Technical regulations for the production of white fresh seeds and seedlings Part 1: Grading of seed quality

Professional Standard - Petroleum, molecular weight

SY/T 6662.5-2014 Non-metallic composite pipes for petroleum and natural gas industries.Part5: Reinforced ultra-high molecular weight polyethylene coiled composite pipes and end fittings
SY 6662.5-2014 Non-metallic composite pipes for the oil and gas industry - Part 5: Reinforced ultra-high molecular weight polyethylene conforming coiled pipes and joints

AT-ON, molecular weight

OENORM EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

CH-SNV, molecular weight

SN EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

PL-PKN, molecular weight

PN-EN ISO 21304-2-2021-07 E Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)