ZH
RU
ES
UV gap
UV gap, Total:114 items.
In the international standard classification, UV gap involves: Test conditions and procedures in general, Road vehicle systems, Paints and varnishes, Insulating fluids, Testing of metals, Air quality, Semiconducting materials, Materials for aerospace construction, Plastics, Insulation, Space systems and operations, Electrical accessories, Power transmission and distribution networks, Transformers. Reactors, Non-ferrous metals, Tyres, Electrical equipment for working in special conditions, Water quality, Fluid storage devices, Pipeline components and pipelines, Industrial automation systems, Metrology and measurement in general, Aerospace electric equipment and systems, Components for aerospace construction.
AENOR, UV gap
- UNE 16310:1975 EXTERNAL CYLINDRICAL GRINDING PLAIN WHEELS WITH SINGLE GAPING. TYPE 5.
- UNE 16309:1975 EXTERNAL CYLINDRICAL GRINDING PLAIN WHEELS WITHOUT GAPING. TYPE 1.
- UNE 16311:1975 EXTERNAL CYLINDRICAL GRINDING PLAIN WHEELS WITH TWO GAPINGS. TUPE 7.
- UNE-EN 60076-3:2014 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
Society of Automotive Engineers (SAE), UV gap
- SAE J1462-1994 External Automatic Slack Adjuster Test Procedure
- SAE J1513-2010 External Automatic Slack Adjuster Performance Requirements
- SAE J1513-2021 External Automatic Slack Adjuster Performance Requirements
- SAE AMS4924G-2011 Titanium Alloy Bars, Forgings, and Rings 5A1 2.5Sn, Extra Low Interstitial, Annealed
- SAE AMS6932A-2011 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Extra Low Interstitial Annealed
- SAE J1513-1994 (R) External Automatic Slack Adjuster Performance Requirements, Recommended Practice May 1994
- SAE AMS6901A-2011 Titanium Alloy Bars, Forgings, and Forging Stock 5Al 2.5Sn, Extra Low Interstitial Annealed
- SAE J683-2011 Tire Chain Clearance Trucks, Buses (Except Suburban, intercity, and Transit Buses), and Combinations of Vehicles
SAE - SAE International, UV gap
American Society for Testing and Materials (ASTM), UV gap
- ASTM F3582-22 Standard Test Method for Exoskeleton Use: Gaps
- ASTM D3732-82(2005) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D3732-82(2001) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D3732-82(1996)e1 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D3732-82(2017) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D3732-82(2011) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D3732-23 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM F136-98 Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNS R56401) for Surgical Implant Applications
- ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM F1619-95(2000) Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
Professional Standard - Urban Construction, UV gap
Association Francaise de Normalisation, UV gap
- NF L90-200-70-06*NF EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials
- NF R17-103:1988 Road vehicles. Commercial vehicles. Overall dimensions and mounting clearance of power take-offs and flanged hydraulic pumps.
- NF C52-176-3/A1*NF EN 60076-3/A1:2018 Power transformers - Part 3 : insulation levels, dielectric tests and external clearances in air
- NF EN 13160-7:2017 Systèmes de détection de fuites - Partie 7 : exigences et méthodes d'essai/d'évaluation pour les espaces interstitiels, les détecteurs de fuite des revêtements et les détecteurs de fuite d'enveloppes
- XP M07-115:2003 Petroleum products - Determination of Solvent Yellow 124 content in middle distillates - Method by extraction with hydrochloric acid and determination by UV-Visible spectrophotometry
- XP M07-113:2003 Produits pétroliers - Détermination de la teneur en traceur Solvent Yellow 124 dans les distillats moyens - Méthode par chromatographie liquide à haute performance avec détection par spectrophotométrie UV-Visible
- XP PR EN 2265-005:1995 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 150 degrés Celsius - Partie 005 : marquables au laser UV - Norme de produit.
- NF C65-100-8:2011 Surge arresters - Part 8 : metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, UV gap
- GB/T 14143-1993 Infrared Absorption Measurement Method of Oxygen Content in the Gap of 300-900μm Silicon Wafer
- GB/T 1557-1989 The method of determining interstitial oxygen content in silicon by infrared absorption
- GB/T 1557-2006 The method of determining interstitial oxygen content in silicon by infrared absorption
- GB/T 16077-1995 Workplace air--Determination of phosgene--Ultraviolet spectrophotometric method
- GB/T 16055-1995 Workplace air--Determination of diphenyl-diphenyl ether--Ultraviolet spectrophotometric method
- GB/T 10237-1988 Power transformers--Insulation levels and dielectric tests external clearances in air
- GB 1094.3-2003 Power transformers Part 3: Insulation levels,dielectric tests and external clearances in air
- GB/T 1094.3-2017 Power transformers - Part 3: Insulation levels, insulation tests and outer insulation air gaps
- GB/T 32520-2016 Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
- GB/T 3836.11-2008 Explosive atmospheres - Part 11: Equipment protection by flameproof enclosures "d" - Method of test for ascertainment of maximum experimental safe gap
- GB 3836.11-2008 Explosive atmospheres.Part11:Equipment protection by flameproof enclosures"d"method of test for ascertainment of maximum experimental safe gap
- GB/T 30040.7-2013 Leak detection systems.Part 7:General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jacket
Group Standards of the People's Republic of China, UV gap
- T/ZZB 0516-2018 External automatic slack adjuster of air brake
- T/CEC 348-2020 1000kV AC system with composite jacket gapless metal oxide surge arrester
- T/QGCML 911-2023 10kV AC Transmission Line Composite Jacket Gapless Metal Oxide Surge Arrester
- T/CASME 460-2023 Metal oxide arrester with fixed gap in series with composite jacket for 10kV AC transmission line
- T/CSEE 0001-2015 Specification of polymer-housed metal oxide surge arresters with series gap for 1000KV AC power transmission lines
国家市场监督管理总局、中国国家标准化管理委员会, UV gap
- GB/T 1557-2018 Test method for determining interstitial oxygen content in silicon by infrared absorption
ECSS - European Cooperation for Space Standardization, UV gap
- Q-ST-70-06C-2008 Particle and UV radiation testing for space materials (First Issue)
Professional Standard - Electron, UV gap
- SJ/T 11491-2015 Test methods for measurement of interstitial oxygen content in silicon by short baseline infrared absorption spectrometry
- SJ/T 10625-1995 Determination method for interstitial atomic oxygen content of germanium by infrared abaorption
- SJ/T 11552-2015 Test methods for measurement of interstitial oxygen content of silicon wafers by infrared absorption with P-polarized radiation incident at the Brewster angle
RU-GOST R, UV gap
- GOST R 25645.338-1996 Polymeric materials for space technique. Requirements for ultraviolet radiation stability tests
- GOST R 52350.1.1-2006 Electrical apparatus for explosive gas atmospheres. Part 1-1. Flameproof enclosures "d". Method of testing for ascertainment of maximum experimental safe gap
- GOST 31610.1.1-2012 Electrical apparatus for explosive gas atmospheres. Part 1-1. Flameproof enclosures ?D?. Method of test for ascertainment of maximum experimental safe gap
- GOST R 8.723-2010 State system for ensuring the uniformity of measurements. Radiometers of the extreme ultraviolet radiation for measurements of radiance with the high spatial distribution in the wavelength range from 10-30 nm. Verification procedure
Professional Standard - Machinery, UV gap
- JB/T 8952-2005 Polymer-housed metal oxide surge arresters without gaps for a.c. systems
- JB/T 10497-2005 Polymeric housed metal oxide surge arresters with series gap for a.c. electric power transmission line
- JB/T 8952-1999 Metal oxide surge arresters polymeric housed without sparkgaps for a.c system with 35Kv and below
British Standards Institution (BSI), UV gap
- BS EN 16602-70-06:2014 Space product assurance. Particle and UV radiation testing for space materials
- BS EN 60076-3:2013 Power transformers. Insulation levels, dielectric tests and external clearances in air
- BS EN 60076-3:2013+A1:2018 Power transformers - Insulation levels, dielectric tests and external clearances in air
- BS EN 60076-3:2001 Power transformers - Insulation levels, dielectric tests and external clearances in air
- BS EN 60099-8:2011 Surge arresters. Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
- BS EN IEC 60099-8:2018 Tracked Changes. Surge arresters. Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
Korean Agency for Technology and Standards (KATS), UV gap
- KS C 4808-2011(2021) Polymer-housed metal-oxide surge arresters without gaps for distribution line
- KS C IEC 60099-8-2014(2019) Surge arresters — Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead t
- KS C IEC 60076-3:2020 Power transformers — Part 3: Insulation levels, dielectric tests and external clearances in air
- KS C IEC 60099-8:2014 Surge arresters — Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead t
German Institute for Standardization, UV gap
- DIN VDE 0532-14:2004 Transformers and reactors - Part 14: External protective spark gaps on bushings
- DIN EN 60076-3:2001 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:2000 + Corrigendum 2000); German version EN 60076-3:2001
- DIN EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
- DIN EN 60076-3:2014 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:2013); German version EN 60076-3:2013
- DIN EN 4034:2008 Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads; German and English version EN 4034:2007
CH-SNV, UV gap
Professional Standard - Electricity, UV gap
- DL/T 2109-2020 Guidelines for Selection of Metal Oxide Surge Arresters with Composite Jackets with Outer Series Gap for DC Transmission Lines
European Committee for Standardization (CEN), UV gap
- EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials
- EN 2267-012:2015 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
VN-TCVN, UV gap
- TCVN 6306-3-2006 Power transformers.Part 3: Insulation levels and dielectric tests and external clearances in air
中华人民共和国国家质量监督检验检疫总局, UV gap
- GB/T 1094.3-2003 Power transformers--Part 3: Insulation levels，dielectric tests and external clearances in air
Indonesia Standards, UV gap
- SNI 04-3586-1994 Power transformator Part 3.1: Insulation level and dielectric test external clearances in air
- SNI IEC 60076-3:2016 Transformator daya – Bagian 3: Tingkat insulasi,uji dielektrik dan jarak bebas eksternal di udara
International Electrotechnical Commission (IEC), UV gap
- IEC 60076-3:2000 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- IEC 60076-3/COR1:2000 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- IEC 60076-3:2013/AMD1:2018 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- IEC 60076-3:2013 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- IEC 60076-3:2013+AMD1:2018 CSV Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- IEC 60079-1-1:2002 Electrical apparatus for explosive gas atmospheres - Part 1-1: Flameproof enclosures "d"; Method of test for ascertainment of maximum experimental safe gap
- IEC 60099-8:2017 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
- IEC 60099-8:2017 RLV Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
European Committee for Electrotechnical Standardization（CENELEC）, UV gap
- EN 60076-3:2013 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
- EN 60076-3:2001 Power Transformers Part 3: Insulation Levels, Dielectric Tests and External Clearances in Air (Remains Current)
ZA-SANS, UV gap
- SANS 60076-3:2000 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air
- SANS 60079-1-1:2004 Electrical apparatus for explosive gas atmospheres Part 1: Flameproof enclosures "d" - Method of test for ascertainment of maximum experimental safe gap
Danish Standards Foundation, UV gap
- DS/EN 60076-3:2001 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
KR-KS, UV gap
- KS C IEC 60076-3-2020 Power transformers — Part 3: Insulation levels, dielectric tests and external clearances in air
ES-UNE, UV gap
工业和信息化部, UV gap
- QC/T 1033-2016 Technical requirements and bench test methods for external automatic gap adjustment devices of pneumatic brakes
RO-ASRO, UV gap
- STAS 6877/11-1979 Electrical gas apparatus for explosive gas atmosphere FLAMEPROOF ENCLOSURE Ascertainment of maximum experimen- tal safe gap
ES-AENOR, UV gap
Standard Association of Australia （SAA）, UV gap
- AS/NZS 60076.3:2017 Power transformers, Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:2013, MOD)
- AS/NZS 60079.1.1:2002 Electrical apparatus for explosive gas atmospheres - Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap
Lithuanian Standards Office , UV gap
- LST EN 60076-3-2002 Power transformers. Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:2000+AC:2000)
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., UV gap
- ASHRAE CH-99-12-1-1999 Guidelines for the Application of Upper-Room Ultraviolet Germicidal Irradiation for Preventing Transmission of Airborne Contagion-Part I: Basic Principles
- ASHRAE CH-99-12-2-1999 Guidelines for the Application of Upper-Room Ultraviolate Germicidal Irradiation for Preventing Transmission of Airborne Contagion-Part II: Design and Operation Guidance
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, UV gap
- PREN 4034-1993 Aerospace Series Bearings-Airframe Rolling Self-Aligning@ with Flanged Outer Ring in Corrosion Resisting Steel with Reduced Internal Radial Clearance Dimensions and Loads
Aerospace, Security and Defence Industries Association of Europe (ASD), UV gap
- ASD-STAN PREN 4034-1996 Aerospace Series Bearings, Airframe Rolling Double Row Self- Aligning Ball Bearings with Flanged Outer Ring in Corrosion Resisting Steel, Reduced Internal Radial Clearance Dimensions and Loads (Edition P 1)