ZH
RU
ES

Linearity in Analytical Tests

Linearity in Analytical Tests, Total:222 items.

In the international standard classification, Linearity in Analytical Tests involves: Non-destructive testing, Rubber, Plastics, Optics and optical measurements, Water quality, Lubricants, industrial oils and related products, Raw materials for rubber and plastics, Testing of metals, Petroleum products in general, Welding, brazing and soldering, Paper and board, Ferrous metals, Analytical chemistry, Radiation measurements, Medical equipment, Photography, Machine tools, Industrial automation systems, Petroleum, petroleum products and natural gas handling equipment, Nuclear energy engineering, Seals, glands, Shafts and couplings, Mechanical testing, Products of the textile industry, Linear and angular measurements, Pipeline components and pipelines, Electrical wires and cables, Fluid storage devices, Fuels, Veterinary medicine, Farming and forestry, Hydraulic fluids, Products of the chemical industry, Test conditions and procedures in general, Radiocommunications, Networking, Ceramics, Wastes, Radiation protection, Lamps and related equipment, Vocabularies, Electrical equipment for working in special conditions, Construction materials, Semiconducting materials, Electromagnetic compatibility (EMC), Mobile services, Structures of buildings.

German Institute for Standardization, Linearity in Analytical Tests

DIN EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors; German version EN 1518:1998
DIN 53765:1994 Testing of plastics and elastomeres; thermal analysis; DSC-method
DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN 53142-2:2004 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN 53142-2:2014 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN EN 13100-2:2005 Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German version EN 13100-2:2004
DIN IEC 61453:2008 Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and functional checks (IEC 61453:2007)
DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN 51431-2:2004 Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF)
DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
DIN 38402-51:2017-05 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 53830-4:1981 Testing of textiles; determination of linear density of single and plied yarns; elasto-yarns including core spun yarns from elastofibres; short length method
DIN EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; English version of DIN EN 12543-2:2008-10
DIN VDE 0472-814:1991 Testing of cables, wires and flexible cords; continuance of isolation effect under fire conditions
DIN 54140-3:1989 Non-destructive testing; electromagnetic methods; representation and general characteristics of test coil assemblies
DIN 51379-2:1990 Testing of lubricants; determination of molybdenum content of lubricating oils; analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
DIN 38402-71:2020-10 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalence of two analysis methods based on the comparison of analysis results (A 71)
DIN 38402-51:2017 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 38402-51:2015 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN ETS 300836-1:1999 Broadband Radio Access networks (BRAN) - HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance testing specification - Part 1: Radio type approval and Radio Frequency (RF) conformance test specification (Endorsement of the English versi
DIN 6855-4:2004 Quality control of nuclear medicine instruments - Part 4: Constancy testing of positron emission tomographs (PET)
DIN EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; English version of DIN EN 725-4:2006-07
DIN ISO 10791-4:2001 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
DIN EN 61223-3-5:2005 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2004); German version EN 61223-3-5:2004
DIN 54115-4:2006 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 4: Construction and testing of mobile apparatus for gamma-radiography
DIN 54115-4:2021 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources for gamma-radiography - Part 4: Construction and testing of mobile apparatus
DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
DIN 22419-1:2004 Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 1: Safety requirements and testing
DIN 18555-4:1986 Testing of mortars containing mineral binders; hardened mortars; determination of linear and transverse strain and of deformation characteristics of masonry mortars by the static pressure test
DIN EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method; German version EN 12544-2:2000
DIN 54115-1:2006 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 1: Stationary and mobile handling for gamma-radiography
DIN 22419-3:2004 Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 3: Gland flanges for entries; safety requirements and testing
DIN 22419-2:2004 Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 2: Gland adaptors for entries; safety requirements and testing
DIN 50443-1:1988 Testing of materials for use in semiconductor technology; detection of crystal defects and inhomogeneities in silicon single crystals by X-ray topography
DIN 54115-3:2006 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 3: Organisation of radiation protection during handling and transport for gamma-radiography
DIN EN 61223-2-6:2008 Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment (IEC 61223-2-6:2006); German version EN 61223-2-6:2007
DIN ETS 300394-4-1:2000 Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-1: Test Suite Structure and test Purposes (TSS&TP) for Mobile Station to Mobile Station (MS-MS) Air
DIN 54115-5:2009 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 5: Building precautionary measures of radiation protection for the gammaradiography
DIN 54387-2:2016-12 Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 2: Determination of total boron, soluble boron compounds, HNO<(Index)3>-soluble boron in B<(Index)4>C, ...
DIN 54115-1 Bb.1:2006 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 1: Stationary and mobile handling for gamma-radiography; Estimating of control regions
DIN 38402-71:2002 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalance of two analytical methods based on the comparison of results and their statistical evaluation, Procedure for quantitative c
DIN EN 61223-3-2:2010 Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:2007); German version EN 61223-3-2:2008
DIN 54115-7:2011 Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources - Part 7: Storage of radioactive sources - Requirements on protection against radiation, fire and theft to be met by storage facilities
DIN EN 12617-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS); German version EN 12617-1:2003
DIN EN IEC 61223-3-8:2023-06 Evaluation and routine testing in medical imaging departments - Part 3-8: Acceptance and constancy tests - Radiography and radioscopy (IEC/CDV 61223-3-8:2022); German and English version prEN IEC 61223-3-8:2022 / Note: Date of issue 2023-05-19

European Committee for Standardization (CEN), Linearity in Analytical Tests

EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN 13100-2:2004 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing
EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
EN ISO 10893-6:2011 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011)
EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
EN 12543-2:1999 Non-Destructive Testing - Characteristics of Focal Spots in Industrial X-Ray Systems for Use in Non-Destructive Testing - Part 2: Pinhole Camera Radiographic Method
EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
EN 12543-5:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis

British Standards Institution (BSI), Linearity in Analytical Tests

BS EN 15305:2008 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction
BS PD CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
BS EN 583-6:2008 Non-destructive testing - Ultrasonic examination - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
21/30436976 DC BS EN IEC 61223-3-8. Evaluation and routine testing in medical imaging departments. Part 3-8. Acceptance and constancy tests. Radiography and radioscopy
BS EN 50110-2:2021 BS EN IEC 61223-3-8. Evaluation and routine testing in medical imaging departments. Part 3-8. Acceptance and constancy tests. Radiography and radioscopy

American Society for Testing and Materials (ASTM), Linearity in Analytical Tests

ASTM E1944-98(2002) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM D5712-15 Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
ASTM D6621-00(2012) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D6621-00 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D6621-00(2006)e1 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D8431-22 Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis
ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D7112-09 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM E831-00 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-19 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7235-16 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7112-18 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-12(2017) Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-19 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6052-97 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2003) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2008) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM E3290-21 Standard Test Method for Establishing Performance of Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
ASTM D7112-05 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-05a Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-12 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7235-05 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-14 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D4927-10 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

Professional Standard - Agriculture, Linearity in Analytical Tests

水产品质量安全检验手册 1.2.3.1-2005 Chapter 1 General Introduction Section 2 Analytical Methods for Aquatic Products Inspection 3. Chemical Analysis (1) Qualitative Analysis
水产品质量安全检验手册 2.10.0.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 10 Determination of Insoluble Dietary Fiber in Aquatic Products (GBT 5009.88-2003)
水产品质量安全检验手册 2.17.2.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 17 Determination of Volatile Basic Nitrogen in Aquatic Products (GBT 5009.44-2003) 2. Trace Diffusion Method
水产品质量安全检验手册 2.17.1.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 17 Determination of Volatile Base Nitrogen in Aquatic Products (GBT 5009.44-2003) 1. Semi-trace Nitrogen Determination Method

未注明发布机构, Linearity in Analytical Tests

BS EN 15305:2008(2009) Non - destructive Testing — Test Method for Residual Stress analysis by X - ray Diffraction

Danish Standards Foundation, Linearity in Analytical Tests

DS/EN 15305/AC:2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials

Lithuanian Standards Office , Linearity in Analytical Tests

LST EN 15305-2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN 15305-2008/AC-2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN 61223-3-5-2005 Evaluation and routine testing in medical imaging departments. Part 3-5: Acceptance tests. Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2004)

AENOR, Linearity in Analytical Tests

UNE-EN 15305:2010 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
UNE-EN 61223-3-2:2009 Evaluation and routine testing in medical imaging departments -- Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment

Association Francaise de Normalisation, Linearity in Analytical Tests

NF A09-185*NF EN 15305:2009 Non-destructive testing - Test Method for Residual Stress analysis by X-ray Diffraction.
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF A89-811-2:2005 Non-destructive testing of welded joints thermoplastics semi-finished products - Part 2 : X-rays radiographic testing.
NF A09-231-4*NF EN 12543-4:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 4 : edge method.
NF A09-231-1*NF EN 12543-1:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 1 : scanning method
NF A09-231-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method.
NF A09-231-3*NF EN 12543-3:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 3 : slit camera radiographic method
NF U47-001:2000 Animal health analysis methods - Detection of antibodies against Contagious Agalactia by the Complement Fixation Test.
NF U47-030:2002 Animal health analysis methods - Detection of antibodies against bovine infectious rhinotracheitis by the virus neutralisation method.
NF A09-231-5*NF EN 12543-5:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Part 5 : measurement of the effective focal spot size of mini and micro focus X-ray tubes.
NF T70-365:2003 Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, shear.
NF T70-365:2010 Energetic materials for defense - Physical-chemical analysis and properties - Characterisation of the bonding between energetic materials and liners, inhibitors and thermal protections, shear
NF C74-152*NF EN 61223-3-2:2008 Evaluation and routine testing in medical imaging departments - Part 3-2 : acceptance tests - Imaging performance of mammographic X-ray equipment.
NF U47-002:2000 Animal health analysis methods - Detection of antibodies against Equine Infectious Anaemia by the Agar Gel Immunodiffusion Test.
NF A09-230-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2 : constancy check by the thick filter method.
NF U47-024:2010 Animal health analysis methods - Detection of antibodies against porcine coronaviridae (respiratory coronaviridae and transmissible gastroenteritis) by virus neutralisation test.
NF U47-024:2001 Animal health analysis method - Detection of antibodies against porcine coronaviridae (respiratory coronaviridae and transmissible gastroenteritis) by virus neutralisation test.
NF C74-152:1997 Evaluation and routine testing in medical imaging departments. Part 3-2 : acceptance tests imaging performance of mammographic X-ray equipment.
NF U47-025:2001 Animal health analysis methods - Detection of antibodies against classical swine fever by virus neutralisation test and immunochemistry on cell cultures (IF or IP).
NF A09-252-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control.
NF C74-153*NF EN 61223-3-3:1997 Evaluation and routine testing in medical imaging departments. Part 3-3 : acceptance tests. Imaging performance of X-ray equipment for digital subtraction angiography (DSA).
NF M60-302:1996 WASTE. NON DESTRUCTIVE MEASUREMENTS BY GAMMA SPECTROMETRY. GAMMA SPECTROMETRY NON DESTRUCTIVE MEASUREMENTS OF THE ACTIVITY OF RADIONUCLIDES IN PACKAGED WASTE FOR CHARACTERIZATION AND INSPECTION PURPOSES.
NF E11-150-2*NF EN ISO 10360-2:2010 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions
NF P50-783-3*NF EN ISO 6781-3:2016 Thermal of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3 : qualifications of equipment operators, data analysts and report writers

Korean Agency for Technology and Standards (KATS), Linearity in Analytical Tests

KS M ISO 14597:2003 Petroleum products－Determination of vanadium and nickel content－Wavelength-dispersive X-ray fluorescence spectrometry
KS I ISO 15839:2022 Water quality — On-line sensors/analysing equipment for water —Specifications and performance tests
KS I ISO 18749:2010 Water quality-Adsorption of substances on activated sludge-Batch test using specific analytical methods
KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS B ISO 13041-4:2010 Test conditions for numerically controlled turning machines and turning centres-Part 4:Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4:2014 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS C CISPR 16-1-5-2004 Specification for radio disturbance and immunity measuring apparatus and methods-Part 1-5:Radio disturbance and immunity measuring apparatus-Antenna calibration test sites for 30 MHz to 1 000 MHz
KS B ISO 10360-2:2003 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
KS B ISO 10360-2:2014 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size

RU-GOST R, Linearity in Analytical Tests

GOST 23055-1978 Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST R 57754-2017 Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis

KR-KS, Linearity in Analytical Tests

KS I ISO 15839-2022 Water quality — On-line sensors/analysing equipment for water —Specifications and performance tests
KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS C IEC 61223-3-2-2017(2022) Evaluation and routine testing in medical imaging departments－Part 3－2：Acceptance tests-Imaging performance of mammographic X-ray equipment

GB-REG, Linearity in Analytical Tests

REG NASA-LLIS-5276-2012 Lessons Learned ?Developing a Human Factors Operability Timeline Analysis

Japanese Industrial Standards Committee (JISC), Linearity in Analytical Tests

JIS Z 4752-2-6:2001 Evaluation and routine testing in medical imaging departments -- Part 2-6: Constancy tests -- X-ray equipment for computed tomography
JIS Z 4752-2-6:2012 Evaluation and routine testing in medical imaging departments -- Part 2-6: Constancy tests -- Imaging performance of computed tomography X-ray equipment

Professional Standard - Machinery, Linearity in Analytical Tests

JB/T 8771.4-1998 Test conditions of machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
JB/T 8772.4-1998 Test conditions of precision machining centres.Part 4:Accuracy and repeatability

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Linearity in Analytical Tests

GB/T 18400.4-2010 Test conditions for machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 20957.4-2007 Test conditions for precision machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 23909.2-2009 Non-destructive testing.Radioscopic testing.Part 2:Check of long term stability of imaging devices
GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 26610.3-2014 Guideline for implementation of risk-based inspection of pressure equipment system.Part 3: Qualitative approach to risk
GB/T 26610.4-2014 Guideline for implementation of risk-based inspection of pressure equipment system.Part 4:Quantitative analysis approach of failure likelihood
GB/T 26610.4-2022 Guideline for implementation of risk-based inspection of pressure equipment system—Part 4： Quantitative analysis approach of failure likelihood
GB/Z 41285.6-2022 Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 6:Inspection,service and functional test of mobile apparatus for γ radio

International Electrotechnical Commission (IEC), Linearity in Analytical Tests

IEC 61453:2007 Nuclear instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests
IEC 60061-DB:2005 Lamp caps and holders together with gauges for the control of interchangeability and safety - 12-month subscription to online database comprising all parts of IEC 60061
IEC 61223-3-5:2004/COR1:2006 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment; Corrigendum 1

ESDU - Engineering Sciences Data Unit, Linearity in Analytical Tests

ESDU 92021-1992 Example of statistical techniques applied to analysis of landing ground roll distance measurements. (Linear regression@ correlation coefficient and F test.)

International Organization for Standardization (ISO), Linearity in Analytical Tests

ISO 18749:2004 Water quality - Adsorption of substances on activated sludge - Batch test using specific analytical methods
ISO 10893-6:2019 Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 10791-4:1998 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions

Association of German Mechanical Engineers, Linearity in Analytical Tests

VDI/VDE/DGQ 2618 Blatt 11.2-2002 Inspection of measuring and test equipment - Test instructions for dial indicators for linear measurement with mechanical indication

CEN - European Committee for Standardization, Linearity in Analytical Tests

EN ISO 10893-6:2019 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

Professional Standard - Commodity Inspection, Linearity in Analytical Tests

SN/T 4401.1-2015 Methods of qualitative and quantitative analysis for drug in clinical sample.Part 1:Ketamine

IETF - Internet Engineering Task Force, Linearity in Analytical Tests

RFC 7492-2015 Analysis of Bidirectional Forwarding Detection (BFD) Security According to the Keying and Authentication for Routing Protocols (KARP) Design Guidelines

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Linearity in Analytical Tests

GB/T 16857.2-2017 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions

VN-TCVN, Linearity in Analytical Tests

TCVN 7681-4-2007 Test conditions for numerically controlled turning machine and turning centres.Part 4: Accuracy and repeatability of positioning of linear and rotary axes
TCVN 6134-2009 Soil quality.Solvent extractable nonvolatile compounds by high performance liquid omatography/thermospray/mass spectrometry (HPLC/TS/MS) or ultraviolet (UV) detection

European Committee for Electrotechnical Standardization（CENELEC）, Linearity in Analytical Tests

EN 61223-3-5:2004 Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance of computed tomography X-ray equipment