ZH
RU
ES
Adhesive effect
Adhesive effect, Total:341 items.
In the international standard classification, Adhesive effect involves: Adhesives, Dentistry, Non-textile floor coverings, Insulating materials, Products of the chemical industry, Construction materials, Plastics, Production in the chemical industry, Inorganic chemicals, Road vehicle systems, Cinematography, Wood, sawlogs and sawn timber, Rubber, Paints and varnishes, Water quality, Birth control. Mechanical contraceptives, Wood-based panels, Photography, Materials for aerospace construction, Pesticides and other agrochemicals, Welding, brazing and soldering, Graphic technology, Wind turbine systems and other alternative sources of energy, Wood technology processes, Geology. Meteorology. Hydrology, Petroleum products in general, Lubricants, industrial oils and related products, Products of the textile industry, Installations in buildings, Materials and articles in contact with foodstuffs, Coatings and related processes used in aerospace industry, Electrical wires and cables, Aerospace engines and propulsion systems, Laboratory medicine, Air quality, Nuclear energy engineering, Surface treatment and coating, Document imaging applications, Road engineering, Waxes, bituminous materials and other petroleum products.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Adhesive effect
- GB/T 2794-2022 Determination for viscosity of adhesives
- GB/T 22377-2008 General requirements for manufacture,application and label of adhesives for decorating and refurbishing
- GB/T 22377-2008 General requirements for manufacture,application and label of adhesives for decorating and refurbishing
- GB/T 22376.1-2008 Adhesives.Methods of preparing bulk specimens.Part 1:Two-part systems
- GB/T 42519-2023 Rubber—Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- GB/T 36060-2018 Process control and testing methods on the water-based adhesives using in hardcover book binding production
- GB/T 22376.2-2008 Adhesives-Methods of preparing bulk specimens-Part 2: Elevatde-temperature-curing one-part systems
- GB/T 22376.2-2008 Adhesives-Methods of preparing bulk specimens-Part 2: Elevatde-temperature-curing one-part systems
- GB/Z 42215-2022 Document management—Environmental and work place safety regulations affecting microfilm processors
Japanese Industrial Standards Committee (JISC), Adhesive effect
- JIS T 6525-1:2005 Denture adhesives -- Part 1: Glue type denture adhesives
- JIS T 6525-1:2013 Denture adhesives.Part 1: Glue type denture adhesives
- JIS T 6525-2:2005 Denture adhesives -- Part 2: Liner type denture adhesives
- JIS T 6525-2:2013 Denture adhesives.Part 2: Liner type denture adhesives
- JIS K 6258:1993 Testing methods of the effect of liquids for vulcanized rubber
- JIS K 7617:1994 Testing methods for evaluating the effect on photographic image stability of the enclosure materials to be used for storing processed films and papers
American Society for Testing and Materials (ASTM), Adhesive effect
- ASTM D7888-13 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
- ASTM D1151-00 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
- ASTM D1151-00(2006) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
- ASTM D1151-00(2013) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
- ASTM D471-98e2 Standard Test Method for Rubber Property-Effect of Liquids
- ASTM D471-16 Standard Test Method for Rubber Property&x2014;Effect of Liquids
- ASTM D471-16a Standard Test Method for Rubber Property&x2014;Effect of Liquids
- ASTM C1737-22 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
- ASTM C1737-10(2016) Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
- ASTM C1737-16 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
- ASTM D471-06 Standard Test Method for Rubber Property-Effect of Liquids
- ASTM D471-06e1 Standard Test Method for Rubber Propertyx2014;Effect of Liquids
- ASTM D471-12a Standard Test Method for Rubber Propertymdash;Effect of Liquids
- ASTM D471-12 Standard Test Method for Rubber Propertymdash;Effect of Liquids
- ASTM D471-16a(2021) Standard Test Method for Rubber Property—Effect of Liquids
- ASTM D471-15 Standard Test Method for Rubber Property&x2014;Effect of Liquids
- ASTM D471-15a Standard Test Method for Rubber Property&x2014;Effect of Liquids
- ASTM C732-06 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
- ASTM D6325-98(2019) Standard Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
- ASTM C1737-10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
- ASTM C1737-23 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
- ASTM D6284-09 Standard Test Method for Rubber Property8212;Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM D471-10 Standard Test Method for Rubber Propertyx2014;Effect of Liquids
- ASTM F485-98 Standard Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces
- ASTM F485-08(2019) Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
- ASTM C793-05 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
- ASTM C793-04 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
- ASTM C793-05(2010) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
- ASTM D1151-00(2022) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
- ASTM F485-02 Standard Test Method for Effects of Cleaners on Unpainted Aircraft Surfaces
- ASTM F485-08 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
- ASTM F485-08(2013) Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
- ASTM D6284-02 Standard Test Method for Rubber Property8212;Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM D6284-17(2023) Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM D7998-19 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
- ASTM D7301-08 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
- ASTM D6284-17 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
- ASTM E1972-04 Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment
- ASTM E1972-98 Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment
- ASTM E1972-04(2011) Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment
- ASTM D7888-18 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
- ASTM D4867/D4867M-04 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
- ASTM C1472-16e1 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
- ASTM D7301-11(2015) Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
- ASTM C793-23 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
- ASTM C1472-16(2022) Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
- ASTM C1472-16 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
GM Holden Ltd, Adhesive effect
Professional Standard - Machinery, Adhesive effect
- JB/T 12168-2015 Pressure-sensitive adhesive tapes for electrical purposes.PVC film tapes with pressure-sensitive adhesive for electrical purposes
- JB/T 5658-2015 Pressure-sensitive adhesive tapes for electrical purposes.Polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
- JB/T 5659-2015 Pressure-sensitive adhesive tapes for electrical purposes.Polyimide film tapes with pressure-sensitive adhesive for electrical purposes
- JB/T 12171-2015 Pressure-sensitive adhesive tapes for electrical purposes.Polytetrafluoroethylene film tapes with pressure sensitive adhesive for electrical purposes
Group Standards of the People's Republic of China, Adhesive effect
Korean Agency for Technology and Standards (KATS), Adhesive effect
- KS M 3723-2003 Testing methods for flexural strength of adhesives
- KS L ISO 13007-1:2011 Ceramic tiles－Grouts and adhesives－Part 1：Terms, definitions and specifications for adhesives
- KS M ISO 15107:2007 Adhesives－Determination of cleavage strength of bonded joints
- KS M 3722-2008 Testing methods for tensile strength of adhesives
- KS M 3728-2011 Testing methods for cleavage strength of adhesive bonds
- KS M 3722-1987 Testing methods for tensile strength of adhesives
- KS M 3728-1986 Testing methods for cleavage strength of adhesive bonds
- KS M 3720-2008 Testing methods for strength properties of adhesives for wood in shear by tension loading
- KS M 3721-2008 Testing methods for strength properties of adhesives in shear by compression loading
- KS M 3729-2011 Testing methods for impact shear strength of adhesive bonds
- KS M 3720-1987 Testing methods for strength properties of adhesives for wood in shear by tension loading
- KS M 3721-1987 Testing methods for strength properties of adhesives in shear by compression loading
- KS M 3717-2005 Determination of lead and cadmium in adhesives for automobiles
- KS M ISO 15108:2009 Adhesives－Determination of strength of bonded joints using a bending-shear method
- KS M 3704-2004 Testing methods for polyvinyl acetate emulsion
- KS M ISO 15109:2007 Adhesives－Determination of the time to rupture of bonded joints under static load
- KS M 6789-2014 Testing methods of the effect of liquids for vulcanized rubber
- KS M 3931-2013(2018) Developer for X-ray film
- KS L ISO 13007-4:2011 Ceramic tiles－Grouts and adhesives－Part 4：Test methods for grouts
- KS A ISO 20859:2010 Cinematography－Spectral response of photographic audio reproducers for analog dye sound racks on 35 mm film
- KS B ISO 9455-14:2002 Soft soldering fluxes－Test methods－Part 14：Assessment of tackiness of flux residues
- KS M ISO 17212:2010 Structural adhesives-Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- KS M ISO 17212:2013 Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- KS M 3726-2011 Adhesives-Determination of solubility of water or alkali soluble pressure sensitive adhesives
- KS M ISO 13226-2007(2017) Rubber－Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers
- KS L ISO 13007-3:2011 Ceramic tiles－Grouts and adhesives－Part 3：Terms, definitions and specifications for grouts
- KS A ISO 20859-2010(2020) Cinematography－Spectral response of photographic audio reproducers for analog dye sound racks on 35 mm film
- KS F 4935-2008 Sealer of injection type for water leakage maintenance of adhesive flexible rubber asphalt series
Military Standard of the People's Republic of China-General Armament Department, Adhesive effect
- GJB 1480A-2013 Specification for structural foaming adhesives
- GJB 9437-2018 Specification for room temperature curing two-component acrylic adhesives
AENOR, Adhesive effect
- UNE-EN 1244:1999 ADHESIVES - DETERMINATION OF COLOUR AND/OR COLOUR CHANGES OF ADHESIVE COATS UNDER THE INFLUENCE OF LIGHT
- UNE 26379:1987 BRAKE FLUIDS. EFFECT ON RUBBER.
- UNE-ISO 1817:2006 Rubber, vulcanized. Determination of the effect of liquids. (ISO 1817:2005)
- UNE 51113:1984 HIDRAULIC BRAKE FLUIDS OF PETROLEUM TYPE. EFFECT ON SYNTHETIC RUBBER
- UNE-EN 12873-2:2005 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials
RO-ASRO, Adhesive effect
- STAS 4593-1990 Abreasive bodies with ceramic and bakelite binders. Quality technical requirements
British Standards Institution (BSI), Adhesive effect
- BS EN 1244:1998 Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light
- BS ISO 19671:2018 Additional lubricants for male natural rubber latex condoms. Effect on condom strength
- BS EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- BS 5550 SubSec.3.4.9:1987 Cinematography. 35 mm film. Sound. Specification for reproduction characteristics of the A-chain frequency response for 35 mm photographic sound
- BS EN 302-4:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
- BS EN 302-4:2004 Adhesives for load-bearing timber structures - Test methods - Determination of the effects of wood shrinkage on the shear strength
- BS ISO 20859:2005 Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
- BS EN 15647:2009 Surface active agents - Determination of the dispersing effect of surfactants on powder
- 23/30470434 DC BS ISO 1817. Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
- BS 5550 SubSec.2.4.3:1986 Cinematography. 16 mm film. Sound. Specification for the recorded characteristic for magnetic round records on 16 mm motion-picture film
- BS 5550-3.4.9:1987 Cinematography. 35 mm film. Sound. Specification for reproduction characteristics of the A-chain frequency response for 35 mm photographic sound
- BS ISO 1817:2022 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
- BS ISO 22234:2005 Cinematography. Relative and absolute sound pressure levels for motion-picture multi-channel sound systems. Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio
- BS 5550 SubSec.2.4.1:1978 Cinematography. 16 mm film. Sound. Specification for positions and dimensions of 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film
- BS PD ISO/TR 18159:2015 Document management. Environmental and work place safety regulations affecting microfilm processors
- BS 5550 SubSec.3.4.8:1986 Cinematography. 35 mm film. Sound. Specification for the lateral positions and width dimensions of two-track negative photographic sound records on 35 mm motion-picture film
- BS ISO 18914:2013 Imaging materials. Photographic film and papers. Method for determining the resistance of photographic emulsions to wet abrasion
- PD ISO/TR 18159:2015 Document management. Environmental and work place safety regulations affecting microfilm processors
- BS EN 12607-1:2007 Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - RTFOT method
- BS EN 12607-3:2007 Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - RFT Method
- BS EN 12607-1:2014*BS 2000-460-1:2014 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RTFOT method
- BS EN 12607-3:2014*BS 2000-460-3:2014 Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RFT method
The American Road & Transportation Builders Association, Adhesive effect
Association Francaise de Normalisation, Adhesive effect
- NF S24-204:1960 CINEMATOGRAPHY. OPTICAL SOUND RECORDING ON 9.5 MM FILM (REDUCED FROM 35 MM).
- NF T46-013*NF ISO 1817:2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
- NF T46-013:2011 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids.
- NF L17-313*NF EN 4106:2013 Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification
- NF ISO 3387:2020 Caoutchouc - Détermination des effets de la cristallisation au moyen de mesurages de dureté
- NF T76-206:2008 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures.
- NF T46-046:2011 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
- NF T46-046*NF ISO 13226:2018 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- NF T76-152-4*NF EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4 : determination of the effects of wood shrinkage on the shear strength
- NF EN 302-4:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 4 : détermination de l'influence du retrait du bois sur la résistance au cisaillement
- NF ISO 13226:2018 Caoutchouc - Élastomères de référence normalisés (SRE) pour la caractérisation de l'effet des liquides sur les caoutchoucs vulcanisés
- NF EN 1244:1998 Adhésifs - Détermination de la couleur et/ou des changements de couleur des revêtements adhésifs sous l'influence de la lumière
- NF T76-005*NF EN 1244:1998 Adhesive - Determination of the colour and/or colour changes of adhesive coats under the influence of light
- NF EN 12873-3:2019 Influence des matériaux en contact sur l'eau destinée à la consommation humaine - Influence due à la migration - Partie 3 : méthode d'essai des résines adsorbantes et échangeuses d'ions
- NF T03-021:1980 Chemical products. Determination of acute toxicity to rats. Single oral administration.
- NF T03-022:1980 Chemical products. Determination of acute toxicity to rats. Single administration by inhalation.
- XP ISO/TS 22687:2019 Caoutchouc - Lignes directrices pour évaluer le devenir environnemental des particules émises par l'usure des pneumatiques et de la route (TRWP)
- NF EN 14984:2016 Amendements minéraux basiques - Détermination de l'effet d'un produit sur le pH d'un sol - Méthode par incubation du sol
Professional Standard - Chemical Industry, Adhesive effect
CZ-CSN, Adhesive effect
- CSN 77 0843-1986 Packaging adhesive. Determination of viscosity with rotary viscosimeter
- CSN 77 0854-1987 Dutermination of the influonce of the packaging adhcsives on the corosion of the metal materials
- CSN 03 8010-1983 Various influencing agenta, rlomonclature and churacteriutics
- CSN 77 0842-1986 Packaging adhesives. Determination of viscosity by means of the Hóppler-Reo- viscosimeter
国家林业局, Adhesive effect
- LY/T 2722-2016 Test method for bonding performance of structural adhesives for finger-jointed materials
SE-SIS, Adhesive effect
- SIS SS-ISO 1817:1990 Rubber, vulcanized — Determination of the effect of liquids
- SIS SS 18 60 33-1991 Anti-rust agents for vehicles — Underbody agents — Determination of effects on aluminium, copper and zinc
- SIS SS 18 60 31-1991 Anti-rust agents for vehicles — Underbody agents — Determination of removability and effect on car finish
- SIS SS 18 60 13-1991 Anti-rust agents for vehicles — Fluids for hollow sections — Determination of effect on aluminium, copper and zinc
- SIS SS 18 60 11-1991 Anti-rust agents for vehicles — Fluids for hollow sections — Determination of remov- ability and effect on car finish
ZA-SANS, Adhesive effect
- SANS 11817:2003 Rubber, vulcanized - Determination of the effect of liquids
- SANS 10183-4-4:2009 Adhesives for wood Part 4-4: Test methods - Determination of the effects of wood shrinkage on the shear strength
German Institute for Standardization, Adhesive effect
- DIN ISO 1817:2008 Rubber, vulcanized - Determination of the effect of liquids (ISO 1817:2005)
- DIN EN 1239:2011 Adhesives - Freeze-thaw stability; German version EN 1239:2011
- DIN EN 60544-1:1996 Electrical insulating materials - Determination of the effects for ionizing radiation - Part 1: Radiation interaction and dosimetry (IEC 60544-1:1994); German version EN 60544-1:1994
- DIN 52179:1977 Testing of wood preservatives; influence of oily wood preservatives on the glueing ability of treated wood
- DIN ISO 1817:2016 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015)
- DIN 15602-6:1983 Film 16 mm; optical reduction printing; fundamental dimensions; factors of influence, scale of reduction
- DIN EN 1240:2011 Adhesives - Determination of hydroxyl value and/or hydroxyl content; German version EN 1240:2011
- DIN ISO 13226:2021-06 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2018)
- DIN 4522-5:1991-05 Photographic lenses; their influence on colour rendition of colour films; terms, values for colour contribution index
- DIN 4522-6:1991-05 Photographic lenses; their influence on colour rendition of colour films; recommended values for colour contribution index
- DIN 54459:2011 Structural adhesives - Testing of adhesively bonded joints - Preparation of samples for shear tensile tests from coil coated steel sheets
- DIN EN 1244:1998-05 Adhesives - Determination of the colour and/or colour changes of adhesives coats under the influence of light; German version EN 1244:1998
- DIN EN 12873-1:2004 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products; German version EN 12873-1:2003
- DIN 15602-6:1983-04 Film 16 mm; optical reduction printing; fundamental dimensions; factors of influence, scale of reduction
- DIN ISO 13226:2006 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2005) English version of DIN ISO 13226:2006-10
- DIN ISO 13226:2015 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
- DIN EN 12873-2:2020 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials; German and English version prEN 12873-2:2020
- DIN 15576-6:1977-12 Designation of motion-picture films; position of emulsion for picture and sound
- DIN EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength; German version EN 302-4:2013
未注明发布机构, Adhesive effect
International Truck and Engine Corporation (ITEC), Adhesive effect
Professional Standard - Forestry, Adhesive effect
RU-GOST R, Adhesive effect
- GOST R 54563-2011 Paint materials. Determination of adhesive by cross-cut method
- GOST 19100-1973 Glued wood. Method of testing of glued points weatherability
- GOST 2917-1976 Oils and additives. Method of test for corrosion influence on metals
- GOST 14340.8-1969 Enamelled round winding wires. Method of the solvent-, oil- and water resistance test
- GOST 9.712-1986 Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesiven bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid agressive media
American National Standards Institute （ANSI), Adhesive effect
KR-KS, Adhesive effect
- KS M 4098-2022 Additional lubricants for male natural rubber latex condoms — Effect on condom strengt
- KS M 3931-2013(2023) Developer for X-ray film
- KS M ISO 13226-2022 Rubber Standard reference elastomers(SREs) for characterizing the effect of liquids on vu l canized rubbers
- KS A ISO 8400-2003(2023) Cinematography -- Position of emulsion surface of 16 mm motion-picture prints -- Identification
International Organization for Standardization (ISO), Adhesive effect
- ISO 1817:1985 Rubber, vulcanized; Determination of the effect of liquids
- ISO 1817:2022 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
- ISO/DIS 1817:1971 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
- ISO/FDIS 1817:2023 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
- ISO 17212:2012 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- ISO 17212:2004 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- ISO 20859:2005 Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
- ISO 6774:1981 Cinematography; Spectral response of photographic sound reproducers for 8 mm Type S motion-picture films; Specifications
- ISO 13226:2011 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- ISO 13226:2018 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- ISO 19671:2018 Additional lubricants for male natural rubber latex condoms — Effect on condom strength
- ISO 13226:2005 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- ISO 13226:1999 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
- ISO 22234:2005/CD Amd 1 Cinematography — Relative and absolute sound pressure levels for motion-picture multi-channel sound systems — Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio — Amendment 1
- ISO 13226:2005/cor 1:2007 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers; Technical Corrigendum 1
- ISO/DTS 23148 Additional lubricants for male synthetic condoms — Effect on condom strength
- ISO 897:1973 Photography — Edge-marked roll film — Identification of the emulsion side
- ISO 18914:2013 Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion
- ISO 18914:2002 Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion
- ISO/TR 18159:2015 Document management - Environmental and work place safety regulations affecting microfilm processors
Danish Standards Foundation, Adhesive effect
- DS/ISO 1817:1987 Rubber, vulcanized. Determination of the effect of liquids
- DS/EN 1244:1999 Adhesives - Determination of the colour and/or colour changes of adhesive coats under influence of light
- DS/EN 12873-1:2004 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products
- DS/EN 12873-2:2006 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials
Society of Motion Picture and Television Engineers (SMPTE), Adhesive effect
- SMPTE 411M-2006 Motion-Picture Film - Cinematography - Spectral Response of Photographic Audio Reproducers for Analog Dye Sound-Tracks on 35-mm Film
- SMPTE ST 411M-2006 Motion-Picture Film - Cinematography - Spectral Response of Photographic Audio Reproducers for Analog Dye Sound-Tracks on 35-mm Film
- SMPTE RP 109-1994 Spectral Response of Photographic Audio Reproducers for 8-mm Type S Motion-Picture Film
- SMPTE RP 200-2002 Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems - Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
Indonesia Standards, Adhesive effect
- SNI ISO 1817:2012 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
GB-REG, Adhesive effect
BE-NBN, Adhesive effect
- NBN-ISO 10591:1992 Building construction - Sealants - Determination of adhesion/cohesion properties after immersion in water
- NBN T 61-207-1974 Admixtures for mortar and concrete— Influence of cold by storage
Professional Standard - Agriculture, Adhesive effect
- NY/T 1853-2010 Guideline for effects of herbicide on the succeeding crops
European Committee for Standardization (CEN), Adhesive effect
- EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- EN 14869-2:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
Professional Standard - Press and Publication, Adhesive effect
- CY/T 224-2020 Bonding performance requirements and testing methods of adhesives for folding cartons
(U.S.) Ford Automotive Standards, Adhesive effect
Society of Automotive Engineers (SAE), Adhesive effect
- SAE AMS3208M-1998 Chloroprene (CR) Rubber Weather Resistant 45 - 55
- SAE AMS3208N-2014 Chloroprene (CR) Rubber, Weather Resistant, 45 - 55
- SAE J2643-2004 Standard Reference Elastomers (SRE) for characterizing the effect of Liquids on Vulcanized Rubbers
- SAE ARP8463-2022 Methods for Determining the Effect of Liquid Disinfectants on Seats in Transport Aircraft
- SAE J2643-2013 Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized Rubbers
- SAE J2643-2023 Standard Reference Elastomers (SREs) for Characterizing the Effect of Liquids on Vulcanized Rubbers
- SAE ARP1755B-1993 Effect of Cleaning Agents on Aircraft Engine Materials Stock Loss Test Method
- SAE AMS2530-2010 Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
- SAE AMS2530A-2013 Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less, Impingement Applied
- SAE ARP1795-1982 STRESS-CORROSION OF TITANIUM ALLOYS Effect of Cleaning Agents on Aircraft Engine Materials
- SAE ARP1795A-1990 Stress Corrosion of Titanium Alloys, Effect of Cleaning Agents on Aircraft Engine Materials
- SAE ARP1755A-1986 EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS Stock Loss Test Method
- SAE ARP1755-1984 EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS Stock Loss Test Method
- SAE ARP1755B-2018 Effect of Cleaning Agents on Aircraft Engine Materials Stock Loss Test Method
AT-ON, Adhesive effect
- ONORM EN 302-4-1992 Adhesives for load bearing timber structures - Test methods - Determination of the effects of wood shrinkage on the shear strength
American Gear Manufacturers Association, Adhesive effect
- AGMA 07FTM14-2007 Roughness and Lubricant Chemistry Effects in Micropitting
- AGMA 14FTM17-2014 The Impact of Surface Condition and Lubricant on Gear Tooth Friction
- AGMA 2000FTM5-2000 Systematic Investigations on the Influence of Viscosity Index Improvers on EHL-Film Thickness
- AGMA 04FTM6-2004 The Effect of a ZnDTP Anti--wear Additive on Micropitting Resistance of Carburised Steel Rollers
API - American Petroleum Institute, Adhesive effect
- API BULL D-4-1951 THE EFFECTS OF DRILLING-MUD ADDITIVES ON OIL-WELL CEMENTS
- API PUBL 26-60029-1977 EFFECTS OF SULFATE AEROSOLS UPON CARDIOPULMONARY FUNCTION IN SQUIRREL MONKEYS
- API PUBL 4147-1972 A STUDY OF MOTOR FUEL COMPOSITION EFFECTS ON AEROSOL FORMATION
- API PUBL 4466-1988 Field Studies on the Reproductive Effects of Oil and Emulsion on Marine Birds
- API 4218-1973 Oxygenates in Automotive Exhausts Effect of an Oxidation Catalyst
- API BULL D-4-1963 EFFECTS OF DRILLING-MUD ADDITIVES ON OIL-WELL CEMENTS (WITHDRAWN)
- API 27-30841-1978 FINAL REPORT - EFFECTS OF SULFATE AEROSOLS UPON HUMAN PULMONARY FUNCTION
- API 27-30839-1977 FINAL REPORT - EFFECTS OF SULPHATE AEROSOLS UPON HUMAN CARDIOPULMONARY FUNCTION
- API 27-30840-1977 THE INFLUENCE OF TRACE METALS IN DISPERSE AEROSOLS ON THE HUMAN BODY BURDEN OF TRACE METALS
- API 27-30842-1976 EFFECTS OF NITRATE AND / OR SULFATE AEROSOLS UPON CARDIOPULMONARY FUNCTION - FINAL REPORT
- API 4182-1973 EFFECTS OF OXIDANT LEVELS ON SELECTED HEALTH CHARACTERISTICS OF PERSONS IN THE LOS ANGELES BASIN
- API DR194-1984 Literature Review on the Effects of Oil and Oil Dispersants on Fishes (Reprinted in 1993)
国家能源局, Adhesive effect
- NB/T 10653-2021 Test methods for structural adhesives for wind turbine blades
ES-UNE, Adhesive effect
- UNE-ISO 1817:2018 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
- UNE-ISO 13226:2017 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
Institute of Electrical and Electronics Engineers (IEEE), Adhesive effect
- SMPTE ST 411:2006 ST 411:2006 - SMPTE Standard - For Motion-Picture Film — Cinematography — Spectral Response of Photographic Audio Reproducers for Analog Dye Sound-Tracks on 35-mm Film
- ST 411:2006 ST 411:2006 - SMPTE Standard - For Motion-Picture Film — Cinematography — Spectral Response of Photographic Audio Reproducers for Analog Dye Sound-Tracks on 35-mm Film
- SMPTE RP 109:1994 RP 109:1994 - SMPTE Recommended Practice - Spectral Response of Photographic Audio Reproducers for 8-mm Type S Motion-Picture Film
- RP 200:2012 RP 200:2012 - SMPTE Recommended Practice - Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems — Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
- RP 200:2002 RP 200:2002 - SMPTE Recommended Practice - Relative and Absolute Sound Pressure Levels for Motion-Picture Multichannel Sound Systems — Applicable for Analog Photographic Film Audio, Digital Photographic Film Audio and D-Cinema
Lithuanian Standards Office , Adhesive effect
- LST ISO 1817:2012 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids (ISO 1817:2011, identical)
- LST EN 1244-2000 Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light
- LST EN 12873-1-2004 Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products
- LST EN 12873-2-2005 Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials
Natural Gas Processor's Association (NGPA), Adhesive effect
GM North America, Adhesive effect
- GM9611P-1988 Effect of Sheet Metal Forming Lubricants on the Phosphate System
- GM GM9611P-1988 Effect of Sheet Metal Forming Lubricants on the Phosphate System
AGMA - American Gear Manufacturers Association, Adhesive effect
- 14FTM17-2014 The Impact of Surface Condition and Lubricant on Gear Tooth Friction
- 2000FTM5-2000 Systematic Investigations on the Influence of Viscosity Index Improvers on EHL-Film Thickness
- 16FTM14-2016 Impact of Surface Condition and Lubricant on Effective Gear Tooth Friction Coefficient
- 04FTM6-2004 The Effect of a ZnDTP Anti--wear Additive on Micropitting Resistance of Carburised Steel Rollers
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Adhesive effect
- ASHRAE 3886-1995 Effect of Coolant Flow Conditions on the Performance of an Absorber
- ASHRAE MN-00-9-1-2000 Impact of Chemistry on the Use of Polyol Ester Lubricants in Refrigeration
- ASHRAE MN-00-9-3-2000 Effects of Lubricant Miscibility and Viscosity on the Performance of an R-134a Refrigerating System
- ASHRAE HI-02-7-3-2002 Assessment of the Commercial Implications of ASHRAE A3 Flammable Refrigerants in Air-Conditioning and Refrigeration Systems
- ASHRAE OR-16-C014-2016 Lubricant Retention and its Effects on Heat Transfer and Pressure Drop of a Microchannel Evaporator
- ASHRAE 4128-1998 Investigation of the Potential Effect of Zeotropic Refrigerant Mixture on Performance of a Hot Water Heat Pump
- ASHRAE TO-98-23-2-1998 Effects of Airflow on Emissions of Volatile Organic Compounds from Carpet-Adhesive Assemblies
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Adhesive effect
- GB/T 33679-2017 Technical safety requirements of rocket production for rainfall enhancement and hail suppression
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Adhesive effect
IT-UNI, Adhesive effect
PL-PKN, Adhesive effect
- PN M55789-1992 Test of corrosion dffect of coolant on ferrous alloy
- PN B06241-1990 Admixtures for concrete Accelerating admixtures Requirements and testing at influence for concrete
- PN B06242-1990 Admixtures for concrete Admixtures waterpoofing Requirements and testing at influence for concrete
- PN B06244-1990 Admixtures for concrete Admixtures complex Requirements and testing at influence for concrete
Canadian General Standards Board （CGSB), Adhesive effect
CEN - European Committee for Standardization, Adhesive effect
- EN 14869-2:2004 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
NL-NEN, Adhesive effect
- NEN-EN 302-4-1993 Adhesives for load-bearing timber stuctures. Test methods. Part 4: Determination of the effects of wood shrinkage on the shear strength
- NEN-EN 275-1992 Wood preservatives. Determination of the protective effectiveness against marine borers
Professional Standard - Civil Aviation, Adhesive effect
- MH/T 6087-2012 Test method for the effect of cleaning agents on unpainted surfaces of aircraft
CU-NC, Adhesive effect
- NC 64-12-1990 Photography Application and Technique. Cinematography 16 mm Negativa Photography Sound Récord on 16 mm, 35/16 mm, and 35/32 mm HotionPicture Films. Position and Dimenaions
Standard Association of Australia （SAA）, Adhesive effect
- AS 1937.9:1991 Methods of test for sealers and adhesives for automotive purposes - Determination of shear strength of metal-to-metal adhesive
中国气象局, Adhesive effect
- QX/T 360-2016 Specifications for static testing of silver iodide weather modification catalysts
ANSI - American National Standards Institute, Adhesive effect
- IT4.14-2002 Photography (Processing) - Developers for Black-and-White Films and Plates - Method for Graininess Evaluation
Shanxi Provincial Standard of the People's Republic of China, Adhesive effect
- DB14/T 1915-2019 Operating procedures for loading and unloading airborne artificial weather modification flame bar catalyst
European Association of Aerospace Industries, Adhesive effect
- AECMA PREN 3003-2002 Aerospace series Non-Metallic materials Structural adhesives Determination of mass per unit area of film adhesives Test method Edition P 1
National Association of Corrosion Engineers (NACE), Adhesive effect
- NACE 1G286-2002 Oilfield Corrosion Inhibitors and Their Effects on Elastomeric Seals
SAE - SAE International, Adhesive effect
- SAE ARP1795A-1982 STRESS-CORROSION OF TITANIUM ALLOYS Effect of Cleaning Agents on Aircraft Engine Materials
GM Global, Adhesive effect
- GMW 16546-2011 Effect of Metal Lubricants on Paint Pretreatment Issue 1; English