ZH
RU
ES

The principle of the weight meter

The principle of the weight meter, Total:113 items.

In the international standard classification, The principle of the weight meter involves: Analytical chemistry, Nuclear energy engineering, Lifting equipment, Plastics, Electronic tubes, Measurement of force, weight and pressure, Graphical symbols, Optical equipment, Optics and optical measurements, Radiation measurements, Fuels, Measurement of volume, mass, density, viscosity, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Crude petroleum, Soil quality. Pedology, Lubricants, industrial oils and related products, Fluid storage devices, Raw materials for rubber and plastics, Paper and board, Earthworks. Excavations. Foundation construction. Underground works, Farming and forestry, Milk and milk products, Refractories, SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT. ADMINISTRATION. TRANSPORT.

SE-SIS, The principle of the weight meter

SIS SEN 01 27 11-1968 Symbols for electrical diagrams Recording and reproducing apparatus and devices

German Institute for Standardization, The principle of the weight meter

DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
DIN 15018-3:1984 Cranes; principles relating to steel structures; design of cranes on vehicles
DIN 15018-3:1984-11 Cranes; principles relating to steel structures; design of cranes on vehicles
DIN EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997); German version EN ISO 11358:1997
DIN 8125-1:2000 Graphical symbols for weighing - Part 1: Fundamental principles, survey
DIN 15020-1:1974-02 Lifting Appliances; Principles Relating to Rope Drives; Calculation and Construction
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
DIN 51395-1:1999 Testing of metal working fluids - Testing in the VSI foam analyzer - Part 1: General working principles
DIN 51834-1:2010 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
DIN 51834-1:2004 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
DIN 51819-1:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
DIN 51819-1:1999 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
DIN EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014); German version EN ISO 11358-1:2014
DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).

Korean Agency for Technology and Standards (KATS), The principle of the weight meter

KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS C IEC 60231-2012(2022) General principles of nuclear reactor instrumentation
KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
KS B ISO 8686-3:2004 Cranes-Design principles for loads and load combinations-Part 3:Tower cranes
KS B ISO 8686-3:2015 Cranes — Design principles for loads and load combinations — Part 3: Tower cranes
KS C IEC 62342-2012(2017) Nuclear power plants－Instrumentation and control systems important to safety－Management of ageing
KS C IEC 62342-2012(2022) Nuclear power plants－Instrumentation and control systems important to safety－Management of ageing
KS C IEC 60231A-2012(2022) General principal of nuclear reactor instrumentation－First supplement to publication 60231(1967)
KS C IEC 62465-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Management of ageing of electrical cabling systems
KS B ISO 8686-1:2015 Cranes — Design principles for loads and load combinations — Part 1: General
KS B ISO 8686-1:2002 Cranes-Design principles for loads and load combinations-Part 1:General
KS C IEC 62465-2012(2022) Nuclear power plants－Instrumentation and control important to safety－Management of ageing of electrical cabling systems
KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS C IEC 62340:2012 Nuclear power plants-Instrumentation and control systems important to safety-Requirements for coping with common cause failure(CCF)
KS B ISO 12391-1:2005 Gas cylinders-Refillable seamless steel-Performance tests-Part 1:Philosophy, background and conclusions
KS B ISO 12391-1:2015 Gas cylinders－Refillable seamless steel－Performance tests－Part 1：Philosophy, background and conclusions
KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS C IEC 62765-1-2017(2022) Nuclear powers plants — Instrumentation and control important to safety — Management of ageing of sensors and transmitters — Part 1: Pressure transmitters
KS L ISO 20565-1-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 1：Apparatus, reagents, dissolution and determination of grav

RU-GOST R, The principle of the weight meter

GOST 28609-1990 Hoisting cranes. Basic provisions of design
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST 32579.4-2013 Cranes. Design principles for loads and load combinations. Part 4. Jib cranes
GOST 32579.5-2013 Cranes. Design principles for loads and load combinations. Part 5. Overhead type crane
GOST 32579.3-2013 Cranes. Design principles for loads and load combinations. Part 3. Tower cranes
GOST 32579.2-2013 Cranes. Design principles for loads and load combinations. Part 2. Mobile cranes
GOST 32579.1-2013 Cranes. Design principles for loads and load combinations. Part 1. General
GOST R IEC 62342-2016 Nuclear power plants. Instrumentation and control systems important to safety. Management of ageing

VN-TCVN, The principle of the weight meter

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments

IN-BIS, The principle of the weight meter

British Standards Institution (BSI), The principle of the weight meter

BS 4877:1972 Recommendations for general principles of nuclear reactor instrumentation
BS EN ISO 11358-1:2022 Plastics. Thermogravimetry (TG) of polymers - General principles
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
BS IEC 60951-1:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - General requirements
BS IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
BS IEC 60951-3:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Equipment for continuous high range area gamma monitoring
BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
BS IEC 62765-1:2015 Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters. Pressure transmitters
BS IEC 60951-2:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air

International Electrotechnical Commission (IEC), The principle of the weight meter

IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
IEC 62765-2:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 2: Temperature sensors

Association Francaise de Normalisation, The principle of the weight meter

NF EN IEC 62465:2019 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Gestion du vieillissement des systèmes de câbles électriques
NF C19-465*NF EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems
NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
NF M60-402*NF ISO 8298:2001 Nuclear fuel technology - Determination of milligram amounts of plutonium in nitric acid solutions - Potentiometric titration with potassium dichromate after oxidation by Ce(IV) and reduction by Fe(II).
NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
NF EN 62340:2010 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle- commande importants pour la sûreté - Exigences permettant de faire face aux Défaillances de Cause Commune (DCC)
NF EN 62765-1:2017 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Gestion du vieillissement des capteurs et des transmetteurs - Partie 1 : transmetteurs de pression
NF ISO 8298:2001 Technologie du combustible nucléaire - Détermination de quelques milligrammes de plutonium dans des solutions d'acide nitrique - Titrage potentiométrique avec le dichromate de potassium après oxydation par le Ce(IV) et réduction par le Fe(II)
NF EN 61947-1:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 1 : projecteurs à résolution fixe
NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF C19-765-1*NF EN 62765-1:2017 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1 : Pressure transmitters

European Committee for Standardization (CEN), The principle of the weight meter

EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of Polymers - General Principles ISO 11358: 1997
EN ISO 11358-1:2022 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2022)
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles

European Committee for Electrotechnical Standardization（CENELEC）, The principle of the weight meter

EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems
EN 62765-1:2017 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters

International Organization for Standardization (ISO), The principle of the weight meter

ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 8298:2000 Nuclear fuel technology - Determination of milligram amounts of plutonium in nitric acid solutions - Potentiometric titration with potassium dichromate after oxidation by CE(IV) and reduction by FE(II)
ISO 15529:1999 Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO/TR 12391-1:2001 Gas cylinders - Refillable seamless steel - Performance tests - Part 1: Philosophy, background and conclusions
ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

AT-ON, The principle of the weight meter

ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments

American Society for Testing and Materials (ASTM), The principle of the weight meter

ASTM D7112-05 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-05a Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-18 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-09 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-12(2017) Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-19 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D7112-12 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D5802-95 Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
ASTM D5802-95(2001) Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)

ES-UNE, The principle of the weight meter

UNE-EN IEC 62465:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)

KR-KS, The principle of the weight meter

KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

IX-EU/EC, The principle of the weight meter

74/148/EEC-1974 Council Directive on the Approximation of the Laws of the Member States Relating to Weights of from 1 mg to 50 kg of Above-Medium Accuracy
78/1031/EEC-1978 Council Directive on the Approximation of the Laws of the Member States Relating to Automatic Checkweighing and Weight Grading Machines
EEC/343/92-1992 Commission Regulation on the Definition of the Concept of Originating Products and Methods of Administrative Cooperation Applicable to Imports into the Community of Products Originating in the Republics of Croatia and Slovenia and the Yugoslav Republics o

American Gas Association, The principle of the weight meter

AGA TOMS-2003 The Theory and Operations of Meter Shop Sonic Nozzle Proving Systems for the Natural Gas Industry

Professional Standard - Aviation, The principle of the weight meter

HB 6247.4-1989 Basic product drawing management system (instrument, electrical specialty) Numbering principles for design documents

未注明发布机构, The principle of the weight meter

ISO 9335:1995/Cor 1:2005 Optical and Optical Instruments Light Transfer Function Measurement Principles and Procedures Technical Corrigendum 1

VDI - Verein Deutscher Ingenieure, The principle of the weight meter

VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2009 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702
VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2019 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702

Standard Association of Australia （SAA）, The principle of the weight meter

AS 2300.1.3:2008
AS 2300.1.8.2:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk
AS 2300.1.3:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of fat - Gravimetric method

Sichuan Provincial Standard of the People's Republic of China, The principle of the weight meter

DB51/T 1910-2014 Sample pretreatment specification for determination of trace heavy metals in forest food and its environment by atomic absorption method

BE-NBN, The principle of the weight meter

NBN C 73-704-2-4-1992