ZH
RU
ES

Electrical and electronic products

Electrical and electronic products, Total:382 items.

In the international standard classification, Electrical and electronic products involves: Environmental testing, Electrical engineering in general, Test conditions and procedures in general, Rotating machinery, Electrical and electronic testing, Mining equipment, Electric traction equipment, Electronic components in general, Vocabularies, Environmental protection, Protection against fire, Coals, Shipbuilding and marine structures in general, Linear and angular measurements, Electronic component assemblies.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electrical and electronic products

GB/T 11804-2005 Environmental condition for electric and electronic products-Terminologies
GB/T 2422-1995 Environmental testing for electric and electronic products. Terms and definitions
GB/T 11804-1989 Terms of environmental conditions for electric and electronic products
GB/T 4798.2-1996 Environmental conditions exsiting in the application of electric and electronic products. Transportation
GB/T 4798.6-1996 Environmental conditions existing in the application of electric and electronic products--Ship environment
GB/T 4797.3-1986 Environmental conditions for electric and electronic products appearing in nature--Living organisms
GB/T 4798.1-1986 Environmental conditions existing in the application of electric and electronic products--Storage
GB/T 4798.10-1991 Environmental conditions exising in the application of electric and electronic products--Introduction
GB/T 26669-2011 Environmentally conscious design for electrical and electronic products.Glossary
GB 4797.3-1986 Electrical and electronic products Natural environmental conditions Biology
GB/T 4798.10-2006 Environmental conditions existing in the application of electric and electronic products Guidance
GB/T 4797.3-2014 Environmental conditions appearing in nature for electric and electronic products.Living organisms
GB/T 2423.23-1995 Environmental testing for electric and electronic proucts. Test Q: Sealing
GB/T 2421.1-2008 Environmental testing for electric and electronic products.General and guidance
GB/T 2421-1999 Environmental testing for electric and electronic products Part 1: General and guidance
GB/T 10593.1-1989 Method of measuring of environmental parameters for electric and electronic products--Vibration
GB/T 10593.2-1990 Method of the measuring enviromental parameters for electric and electronic products salt mist
GB/T 4797.5-1992 Environmental condiions appearing in naure of electric and elecronic products--Precipitation and wind
GB/T 4797.6-1995 Environmental conditions appearing in nature for electric and electronic products. Dust, sand, salt mist
GB/T 2424.17-1995 Environmental testing for electric and electronic prodcts. Guidance on soldering test
GB/T 2424.2-2005 Environment tests for electric and electronic products.Guidance for damp heat tests
GB/T 26671-2011 Guide for environmentally conscious design assessment of electrical and electronic products
GB/T 5169.18-2005 Fire hazard testing for electric and electronic products-part 18:Guidance on the minimization of toxic harzards due to fire involving electric and electronic products-General
GB/T 4797.1-1984 Environmental conditions appearing in nature of electric and electronic products--Temperature and humidity
GB/T 4797.1-2005 Environmental conditions appearing in nature of electric and electronic products Temperature and humidity
GB/T 4798.5-1987 Environmental conditions existing in the application of electric and electronic products--Ground vehicle installations
GB/T 5170.1-2008 Inspection methods for environmental testing equipments for electric and electronic products.Genernal
GB/T 2424.1-2005 Environmental testing for electric and electronic products Guidance for high temperature and low temperature tests
GB/T 4798.1-2005 Environmental conditions existing in the application of electric and electronic products Section 1:Storage
GB/T 4798.2-2008 Environmental conditions existing in the application of electric and electronic products.Part 2:Transportation
GB/T 4798.9-1997 Environmental conditions existing in application of electric and electronic products--Microclimates inside products
GB/T 4797.4-1989 Environmental conditions appearing in nature for electric and electronic products--Solar radiation and temperature
GB/T 28179-2011 Environmentally conscious design for electrical and electronic product.Indentification of environmental aspects
GB/T 2424.5-2006 Enviromental tests for electric and electronic products.Confirmation of the performance of temperature chambers
GB/T 4797.4-2006 Environmental conditions appearing in nature for electric and electronic products-Solar radiation and temperature
GB/T 2424.23-1990 Basic environmental test procedures for electric and electronic products--Guidance for water test
GB/T 4796-2001 Classification of environmental parameters and their severities of electric and electronic products
GB/T 2424.2-1993 Basic environmental testing procedures for electric and electronic products. Guidance for damp heat tests
GB/T 4798.7-1987 Environmental conditions existing in the application of electric and electronic products--Portable and non-stationary use
GB/T 10593.1-2005 Measuring methods of environmental parameters for electric and electronic products.Part 1:Vibration
GB 4798.7-1987 Environmental conditions for application of electrical and electronic products Portable and non-fixed use
GB/T 10593.2-2023 Measurement methods for environmental parameters of electrical and electronic products Part 2: Salt spray
GB/T 10593.2-2012 Method of the measuring environmental parameters for electric and electronic products.Part 2:Salt mist
GB/T 2424.6-2006 Environmental testing for electric and electronic products.Confirmation of the performance of temperature/humidity chambers
GB/T 2424.15-2008 Enviromental testing for electric and electronic products.Guide for combined temperature/low air pressure tests
GB/T 5169.25-2008 Fire hazard testing for electric and electronic products.Part 25:Smoke obscuration.General guidance
GB/T 5169.29-2008 Fire hazard testing for electric and electronic products.Part 29:Heat release.General guidance
GB/T 5169.1-1997 Fire hazard testing for electric and electronic products. Part 4: Terminology concerning fire tests
GB/T 5170.1-1995 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. General
GB/T 2423.41-1994 Basic environmental testing procedures for electric and electronic products Wind pressure
GB/T 2423.38-1990 Basic environmental test procedures for electric and electronic products--Test R: Water test method
GB/T 4797.2-1986 Environmental conditions for electric and electronic products appearing in nature--Altitude and air pressure,deepness and water pressure
GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products.Temperature testing equipments
GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products.Damp heat testing equipments
GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products.Salt mist testing equipments
GB/T 2424.13-1981 Electric and electronic products--Basic environmental test regulations for electricians--Guidelines for temperature variation tests
GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
GB/T 2421.2-2008 Environmental testing for electric and electronic products.Information for specification writers.Test summaries
GB/T 5169.1-2007 Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests
GB/T 5169.7-1985 Fire hazard testing for electric and electronic products--Test method of bunsen type flame
GB/T 5169.1-2015 Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests
GB/T 4798.5-2007 Environmental conditions existing in the application of electric and electronic products.Section 5: Ground vehicle installations
GB/T 4797.5-2008 Classification of environmental conditions of electric and electronic products.Environmental conditions of nature.Precipitation and wind
GB/T 4797.8-2008 Classification of environmental conditions for electric and electronic products.Environmental conditions appearing in nature.Fire exposure
GB/T 32466-2015 Accelerated stress testing procedures for electric and electronic products.Guidance for highly accelerated stress screen
GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests B: Dry heat
GB/T 5169.17-2002 Fire hazard testing for electric and electronic products--Part 17: 500W flame test methods
GB/T 2423.39-1990 Basic environmental testing procedures for electric and electronic products--Test Ee: Bounce
GB/T 10593.3-1990 Methods of measuring environmental parameters for electric and electronic products—Treatment and induction for the vibration data
GB/T 2423.31-1985 Basic environmental testing procedures for electric and electronic products--Test:inclinations and motions
GB/T 2424.20-1985 Basic environmental testing procedures for electric and electronic products--Guidance for test simulating inclinations and motions
GB/T 2423.37-1989 Basic environmental testing procedures for electric and electronic products--Test L: Dust and sand
GB/T 4798.3-1990 Environmental conditions existing in the application for electric and electronic products--Stationary use at weather-protected locations
GB/T 4798.4-1990 Environmental conditions existing in the application for electric and electronic products--Stationary use at non-weather-protected locations
GB/T 29309-2012 Accelerated stress testing procedures for electric and electronic products.Guidance for highly accelerated life test
GB 10593.3-1990 Vibration data processing and induction of environmental parameter measurement methods for electrical and electronic products
GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products. Test Ka:Salt mist
GB/T 2423.28-1982 Basic environmental testing procedures for electric and electronic products--Test T: soldering
GB/T 2423.47-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fg: Vibration, acoustically induced
GB/T 2424.19-2005 Environment tests for electric and electronic products-Guidance on the application of the environmental test to simulate the effects of storage
GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering
GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
GB/T 2423.39-2008 Environmental test for electric and electronic products.Part 2:Test methods.Test Ee:Bounce
GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
GB/T 2423.21-1991 Basic environmental testing procedures for electric and electronic products--Test M:Low air pressure
GB/T 15480-1995 Series of mounting sizes for vibration, shock and bump machine tables for electric and electronic products
GB/T 5170.11-2008 Inspection methods for environmental testing equipments for electric and electronic products.Corrosive gas testing equipments
GB/T 5170.9-2008 Inspection methods for environmental testing equipments for electric and electronic products.Solar radiation testing equipments
GB/T 20626.1-2006 Specific environment condition-Electric and electronic products for plateau-Part1:General technical requirements
GB/T 5169.31-2022 Fire hazard testing for electric and electronic　products—Part 31: Surface spread of flame—General guidance
GB/T 2424.25-2000 Environmental testing for electric and electronic products-Part 3:Test guidance Seismic test methods
GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure
GB/T 5169.21-2006 Fire hazard testing for electric and electronic products.Part 21:Abnormal heat.Ball pressure test
GB/T 5169.31-2008 Fire hazard testing for electric and electronic products.Part 31:Surface spread of flame.General guidance
GB/T 5169.18-2013 Fire hazard testing for electric and electronic products.Part 18:Toxicity of fire effluent.General guidance
GB/T 4798.7-2007 Environmental conditions existing in the application of electric and electronic products.Part 7: Portable and non-stationary use
GB/T 5169.11-1997 Fire hazard testing for electric and electronic products. Test methods. Glow-wire end-product test and guidance
GB/T 5169.10-1997 Fire hazard testing for electric and electronic products. Test methods. Glow-wire test methods--General
GB/T 2423.22-2002 Environmental testing for electric and electronic products--Part 2: Test methods Test N: Change of temperature
GB/T 5169.6-1985 Fire hazard testing for electric and electronic products--Test method of bad connection with heater
GB/T 5170.20-1990 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Water testing equipments
GB/T 2424.15-1992 Basic environmental testing procedures for electric and electronic products--Guide for combined temperature/low air pressure tests
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products. Test Db:Damp heat,cyclic
GB/T 2423.42-1995 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
GB/T 13951-1992 General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations
GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
GB/T 5170.20-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Water testing equipments
GB/T 20626.2-2006 Specific environmental condition-Electrical and electronic products for plateau-Part2:Selective types and testing specification
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products. Test Ca:Damp heat,steady state
GB/T 2424.18-1982 Basic environmental testing procedures for electric and electronic products--Guidance to test of immersion in cleaning solvents
GB/T 2423.8-1995 Environmental testing for electric and electronic products. Parts 2: Test methods. Test Ed: Free fall
GB/T 2423.46-1997 Environmental testing for electric and electronic products. Part 2: Tests methods. Test Ef: Impact, pendulum hammer
GB/T 2423.54-2005 Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination
GB/T 2423.37-2006 Environmental testing for electric and electronic products Part 2: Test methods Test L: Dust and sand
GB/T 2423.10-2008 Environmental testing for electric and electronic products.Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 4797.7-2008 Classification of environmental conditions of electric and electronic products.Environmental conditions appearing in nature.Earthquake vibration and shock
GB/T 2423.55-2006 Environmental testing for electric and electronic products.Part 2:Test methods.Test Eh:Hammer tests
GB/T 20626.3-2006 Specific environmental condition-Electric and electronic products for plateau-Part3:Protection requirement of lighting,pollution,condensation
GB/T 20626.3-2022 Specific environmental condition—Electric and electronic products for plateau—Part 3:Protection requirement of lightning,pollution,condensation
GB/T 32355.4-2015 Assessment values of recyclability rate for electrical and electronic products.Part 4:Copier and printer
GB/T 2423.16-1999 Environmental testing for electric and electronic products-- Part 2: Tests--Test J and guidance: Mould growth
GB/Z 5169.15-2001 Fire hazard testing for electric and electronic products Test methods 500W nominal test flame and guidance
GB/T 5169.2-2002 Fire hazard testing for electric and electronic products--Part 2: Guidance for assessing the fire hazard--General guidelines
GB/T 2423.45-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Z/ABDM: Climatic sequence
GB/T 2424.13-2002 Environmental testing for electric and electronic products--Part 2: Test methods Guidance on change of temperature tests
GB/T 5170.2-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Temperature testing equipments
GB/T 5170.8-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Salt mist testing equipments
GB/T 5170.5-1996 Inspection on methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat testing equipments
GB/T 2423.44-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
GB/T 2424.14-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Guidance for solar radiation testing
GB/T 2423.32-1985 Basic environmental testing procedures for electric and electronic products--Solderability testing by the wetting balance method
GB/T 2424.21-1985 Basic environmental testing procedures for electric and electronic products--Guidance on solderability testing by the wetting balance method
GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
GB/T 4796-2008 Classification of Environmental Conditions for Electrical and Electronic Products Part 1: Environmental Parameters and Their Severity
GB/T 5169.35-2015 Fire hazard testing for electric and electronic products.Part 35: Corrosion damage effects of fire effluent.General guidance
GB/T 2423.5-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ea and guidance: Shock
GB/T 2423.6-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
GB/T 2423.16-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test J and guidance:Mould growth
GB/T 5169.2-2013 Fire hazard testing for electric and electronic products.Part 2: Guidance for assessing the fire hazard.General guidelines
GB/T 4797.2-2005 Environmental conditions for electric and electronic products appearing in nature Part 2:Altitude and air pressure,deepness and water pressure
GB/Z 5169.42-2013 Fire hazard testing for electric and electronic products.Part 42 : Test flames.Confirmatory tests.Guidance
GB/T 5169.21-2017 Fire hazard testing for electric and electronic products.Part 21:Abnormal heat.Ball pressure test method
GB/T 5169.5-1997 Fire hazard testing for electric and electronic products. Part 2: Test methods. Section 2: Needle-flame test
GB/T 5169.12-1999 Fire hazard testing for electric and electronic products Test methods Glow-wire flammability test on materials
GB/T 5169.13-1999 Fire hazard testing for electric and electronic products-Test methods-Glow-wire ignitability test on materials
GB/T 2423.25-1992 Basic environmental testing procedures for electric and electronic products--Test Z/AM: combined cold/low air pressure tests
GB/T 2423.26-1992 Basic environmental testing procedures for electric and electronic products--Test Z/BM: combined heat/low air pressure tests
GB/T 13952-1992 Parametric classification of environmental conditions of electric and electronic products for mobile platforms and offshore installations
GB/T 2424.19-1984 Basic environmental testing procedures for electric and electronic products--Guidance for the environmental tests simulating the effects of storage
GB/T 2423.3-2006 Environmental testing for electric and electronic products-Part 2:Tesing method-Test Cab：Damp heat,steady state
GB/T 2424.7-2006 Environmental tests for electric and electronic products. Measurements in temperature chambers for tests A and tests B (with load)
GB/T 2424.26-2008 Environmental testing for electric and electronic products.Part 3:Supporting documentation and guidance.Selecting amongst vibration tests
GB/T 2424.17-2008 Environmental testing for electric and electronic products.Part 2:Test methods Guidance on test T:Soldering test
GB/T 5169.17-2008 Fire hazard testing for electric and electronic products.Part 17:Test flames.500W flame test methods
GB/Z 5169.32-2013 Fire hazard testing for electric and electronic products.Part 32:Heat release.Heat release of insulating liquids
GB/T 4798.3-2007 Environmental conditions existing in the application of electric and electronic products- Part 3: Stationary use at weather-protected locations
GB/T 4798.4-2007 Environmental conditions existing in the application of electric and electronic products- Part 4: Stationary use at non-weather-protected locations
GB/T 2424.10-1993 Basic environmental testing procedures for electric and electronic products. General guidance of accelerated testing for atmospheric corrosion
GB/T 2423.48-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ff: Vibration--Time-history method
GB/T 2423.18-2000 Environmental testing-Part 2: Tests-Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.9-2001 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
GB/T 5170.9-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Solar radiation testing equipments
GB/T 5170.11-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments
GB/T 5169.16-2002 Fire hazard testing for electric and electronic products--Part 16: 50W horizontal and vertical flame test methods
GB/T 2423.10-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fc and guidance: Vibration (Sinusoidal)
GB/T 2423.33-1989 Basic environmental testing procedures for electric and electronic products--Test Kca: High consistence sulphur dioxide test
GB/T 2423.49-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
GB/T 2423.52-2003 Environmental testing for electric and electronic products-Part 2:Test methods-Test 77:Body strength and impact shock
GB/T 2423.58-2008 Enviromental testing for electric and electonic products.Part2:Tests methods.Test Fi:Vibration.Mixed Mode
GB/T 2423.48-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ff:Vibration.Time-history method
GB/T 5169.24-2008 Fire hazard testing for electric and electronic products.Part 24:Guidance for assessing the fire hazard.Insulating liquids
GB/T 5169.17-2017 Fire hazard testing for electric and electronic products.Part 17:Test flames.500 W flame test method
GB/T 32355.5-2015 Assessment values of recyclability rate for electrical and electronic products.Part 5:Small and medium three-phase asynchronous motor
GB/T 2423.15-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ga and guidance: Acceleration, steady state
GB/T 2424.12-1982 Basic environmental testing procedures for electric and electronic products--Guidance for hydrogen sulphide test for contacts and connections
GB/T 2423.38-2005 Environmental test for electric and electronic products.Part 2:Test mechod Test R:Water test mechod and Guidance
GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
GB/T 2423.15-2008 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady
GB/T 2423.32-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method
GB/T 2423.38-2008 Environmental testing for electric and electronic products.Part2:Test methods.Test R:Water test method and guidance
GB/T 5169.26-2008 Fire hazard testing for electric and electronic products.Part 26:Smoke obscuration.Summary and relevance of test methods
GB/T 5169.30-2008 Fire hazard testing for electric and electronic products.Part 30:Heat release.Summary and relevance of test methods
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
GB/T 5169.33-2023 Fire Hazard Test for Electrical and Electronic Products Part 33: Guidelines for Fire Hazard Assessment General Principles of Ignitability
GB/Z 5169.33-2014 Fire hazard testing for electric and electronic products.Part 33:Guidance for assessing the fire hazard.Ignitability.General guidance
GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
GB/T 2424.11-1982 Basic environmental testing procedures for electric and electronic products--Guidance for sulphur dioxide test for contacts and connections
GB/T 2423.34-1986 Basic environmental testing procedures for electric and electronic products--Test Z/AD: Composite temperature/humidity cyclic test
GB/T 5169.19-2022 Fire hazard testing for electric and electronic products—Part 19: Abnormal heat—Mould stress relief distortion test
GB/T 5169.44-2022 Fire hazard testing for electric and electronic products—Part 44: Guidance for assessing the fire hazard—Fire hazard assessment
GB/T 2423.33-2005 Environmental testing for electric and electronic products Part 2:Test Method Test Kca:High concentration sulfur dioxide
GB/T 2423.57-2008 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis
GB/T 5169.19-2006 Fire hazard testing for electric and electronic products.Part 19: Abnormal heat.Mould stress relief distortion test
GB/T 5169.28-2008 Fire hazard testing for electric and electronic products.Part 28:Smoke obscuration.Small-scale static test.Materials
GB/T 5169.44-2013 Fire hazard testing for electric and electronic products.Part 44:Guidance for assessing the fire hazard.Fire hazard assessment
GB/T 5169.7-2001 Fire hazard testing for electric and electronic products Test methods Diffusion type and premixed type flame test methods
GB/T 5169.14-2001 Fire hazard testing for electric and electronic products Test methods 1kW nominal pre-mixed test flame and guidance
GB/T 5169.3-1985 Fire hazard testing for electric and electronic products--Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic components
GB/T 32355.1-2015 Assessment values of recyclability rate for electrical and electronic products.Part 1:Room air conditioners and household refrigerators
GB/T 32355.2-2015 Evaluation value of renewable utilization rate of electric and electronic products - Part 2: Washing machines, televisions and microcomputers
GB/T 2423.30-1999 Environmental testing for electric and electronic products-- Part 2: Test methods Test XA and guidance:immersion in cleaning solvents
GB/T 2423.51-2000 Environmental testing for electric and electronic products-Part 2:Test methods-Test Ke:Flowing mixed gas corrosion test
GB/T 2423.24-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Sa: Simulated solar radiation at ground level
GB/T 5170.16-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test
GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
GB/T 5170.14-1985 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Electrodynamic vibrating type machines for vibration (sinusoidal) test
GB/T 5170.14-2009 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products.Electrodynamic vibrating type machines for vibration(sinusoidal)test
GB/T 2423.11-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements
GB/T 2423.40-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
GB/T 2423.29-1999 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices
GB/T 5170.18-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
GB/T 5169.20-2006 Fire hazard testing for electric and electronic products.Part 20: Sueface spread of flame.Summary relevance of test methods
GB/T 5170.13-1985 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Mechanical vibrating type machines for vibration (sinusoidal ) test
GB/T 5170.15-1985 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Hydraulic vibrating type machines for vibration (sinusoidal) test
GB/T 5170.18-1987 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
GB/T 5170.19-1989 Inspection methods for basic parameters of environmen-tal testing equipments for electric and electronic products--Combined temperature/vibration (sinusoidal)testing equipments
GB/T 5170.13-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test
GB/T 5170.15-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Hydraulic vibrating type machines for vibration(sinusoidal)test
GB/T 2423.34-2005 Environmental testing for electric and electronic products.Part 2:Test Methods Test Z/AD:Composite temperature/humidity cyclic test
GB/T 5170.19-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Combined temperature/vibration(sinusoidal)testing equipments
GB/T 5169.22-2015 Fire Hazard Tests for Electrical and Electronic Products - Part 22: Test Flame 50W Flame Apparatus and Confirmation Test Methods
GB/T 2423.20-1981 Electric and electronic products--Basic environmental test regulations for electricians--Test Kd:The hydrogen sulfide method at the point of contact and the connecting element
GB/T 2423.12-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high
GB/T 2423.13-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium
GB/T 2423.14-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low
GB/T 2423.60-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test U:Robustness of terminations and integral mounting devices
GB/T 5169.15-2008 Fire hazard testing for electric and eletronic products.Part 15: Test flames.50OW flames.Apparatus and confirmational test methods
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products.Part 16:Test flames.50W horizontal and vertical flame test methods
GB/T 5169.22-2008 Fire hazard testing for electric and electronic products.Part 22:Test flames.50W flame.Apparatus and confirmational test methods
GB/T 5169.27-2008 Fire hazard testing for eletric and electronic products.Part 27:Smoke obscuration.Small-scale static test.Description of the apparatus
GB/T 5169.15-2015 Fire hazard testing for electric and eletronic products.Part 15: Test flames.500 W flames.Apparatus and confirmational test methods
GB/T 5169.39-2015 Fire hazard testing for electric and electronic products.Part 39:Toxicity of fire effluent.Use and interpretation of test results
GB/T 5169.20-2013 Fire hazard testing for electric and electronic products.Part 20:Surface spread of flame.Summary and relevance of test methods
GB/T 5169.9-2013 Fire hazard testing for electric and electronic products.Part 9: Guidance for assessing the fire hazard.Preselection testing procedures.General guidelines
GB/T 5169.38-2014 Fire hazard testing for electric and electronic products.Part 38:Toxicity of fire effluent.Summary and relevance of test methods
GB/T 5170.21-2008 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products.Hydraulic vibrating type machines for vibration(random) test
GB/T 5169.9-2006 Fire hazard testing for electric and electronic products.Part 9: Guidance for assessing the fire hazard.Use of preselection testing procedures
GB/T 5170.16-1985 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Centrifugal machines for constant acceleration test
GB/T 2423.19-1981 Electric and electronic products--Basic environmental test regulations for electricians--Test Kc: The sulphur dioxide method at the point of contact and the connecting element
GB/T 2423.27-1981 Electric and electronic products--Basic environmental test regulations for electricians--Test Z/AMD: The successive integrated low temperature/low atmospheric pressure/damp-heat method
GB/T 5169.16-2017 Fire hazard testing for electric and electronic products.Part 16:Test flames.50 W horizontal and vertical flame test methods
GB/T 5169.40-2015 Fire hazard testing for electric and electronic products.Part 40:Toxicity of fire effluent.Estimation of toxic potency.Apparatus and test method
GB/T 2423.43-2008 Environmental testing for electric and electronic products.Part 2:Test method.Mounting of specimens for vibration,impact and similar dynamic tests
GB/T 2423.56-2006 Environmental testing for electric and electronic products-Part 2:Test methods-Test Fh:Vibration,broad-band random(digital control) and guidance
GB/T 5169.36-2015 Fire hazard testing for electric and electronic products.Part 36:Corrosion damage effects of fire effluent.Summary and relevance of test methods
GB/T 20643.2-2008 Specific environment condition.Environmental test methods.Part 2: Artificial environment test method and guidance.Electric and electronic products (including communication products)
GB/T 5170.17-1987 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Combined sequential cold / low air pressure and damp heat testing equipments
GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
GB/T 5170.17-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Combined sequential cold low air pressure and damp heat testing equipments
GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests
GB/T 2423.27-2005 Environmental testing for electric and electronic products.Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test
GB/T 5169.23-2008 Fire hazard testing for electric and electronic products.Part 23:Test flames.500 W vertical flame test method for tubular polymeric materials
GB/T 5169.47-2022 Fire hazard testing for electric and electronic products—Part 47: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical p
GB/T 2423.50-1999 Environmental testing for electric and electronic products Part 2: Tests--Test Cy:Damp heat,steady state,accelerated test primarily intended
GB/T 5169.41-2015 Fire hazard testing for electric and eletronic products—Part 41: Toxicity of fire effluent—Estimation of toxic potency—Calculation and interpretation of test results
GB/T 5169.3-2005 Fire hazard testing for electric and electronic products-Part 3:Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic components
GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
GB/T 5169.5-2008 Fire hazard testing for electric and electronic products.Part 5:Test flames.Needle test method.Apparatus,confirmatory arrangement and guidance
GB/T 5169.34-2023 Fire Hazard Testing for Electrical and Electronic Products Part 34: Summary and Relevance of Ignition Test Methods Guidelines for Fire Hazard Assessment
GB/Z 5169.34-2014 Fire hazard testing for electric and electronic products.Part 34:Guidance for assessing the fire hazard.Ignitability.Summary and relevance of test methods
GB/T 2423.36-1986 Basic environmental testing procedures for electric and electronic products--Tests Z/BFc:Combined high temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 2423.7-1995 Environmental testing for electric and electronic products. Test 2:Test methods. Test Ec and guidance:Drop and topple. Primarily for equipment-type specimens
GB/T 2423.53-2005 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
GB/T 2423.35-1986 Basic environmental testing procedures for electric and electronic products--Test Z/AFc: Combined low temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products
GB/T 5169.11-2017 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products(GWEPT)
GB/T 5169.9-1993 Fire Hazard Tests for Electrical and Electronic Products Fire Hazard Assessment Technical Requirements and Test Specifications Formulation Guidelines Preselection Procedures Use Guidelines
GB/T 5169.10-2017 Fire Hazard Tests for Electrical and Electronic Products - Part 10: Glow Wire/Hot Wire Basic Test Methods Glow Wire Apparatus and General Test Methods
GB/T 5169.10-2006 Fire hazard testing for electric and electronic products Part 10: Glow/hot-wire based test methods Glow-wire apparatus and common test procedure
GB/T 5169.8-1985 Fire hazard testing for electric and electronic products--Examples of fire hazard assessment procedures and interpretation of results--Combustion characteristics and survey of test methods for their determination
GB/T 5169.12-2006 Fire hazard testing for electric and electronic products Part 12: Glowing/hot-wire based test methods Glow-wire flammability test method for materials
GB/T 5169.13-2006 Fire hazard testing for electric and electronic products.Part 13:Glowing/hot-wire based test methods.Glow-wire ignitability test method for materials
GB/T 5169.14-2007 Fire hazard testing for electric and eletronic products.Part 14:Test flames.1kW nominal Pre-mixed flame.Apparatus,confirmatory test arrangement and guidance
GB/T 5169.14-2017 Fire hazard testing for electric and electronic products.Part 14:Test flames.1 kW nominal pre-mixed flame.Apparatus,confirmatory test arrangement and guidance
GB/T 2423.35-2005 Environmental testing for electric and electronic products.Part 2:Tests Tests Z/AFc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 2423.36-2005 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 5169.12-2013 Fire hazard testing for electric and electronic products.Part 12: Glowing/hot-wire based test methods.Glow-wire flammability index (GWFI) test method for materials
GB/T 5169.13-2013 Fire hazard testing for electric and electronic product.Part 13:Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials

国家市场监督管理总局、中国国家标准化管理委员会, Electrical and electronic products

GB/T 37143-2018 Maturity testing for electric and electronic products
GB/T 5169.25-2018 Fire hazard testing for electric and electronic products—Part 25: Smoke obscuration—General guidance
GB/T 5169.29-2020 Fire hazard testing for electric and electronic products—Part 29: Heat release—General guidance
GB/T 20626.2-2018 Specific environmental condition—Electrical and electronic products for plateau—Part 2: Selective types and testing specification
GB/T 5169.2-2021 Fire hazard testing for electric and electronic products—Part 2: Guidance for assessing the fire hazard—General guidelines
GB/T 5169.24-2018 Fire hazard testing for electric and electronic products—Part 24: Guidance for assessing the fire hazard—Insulating liquids
GB/T 5169.45-2019 Fire hazard testing for electric and electronic products—Part 45: Guidance for assessing the fire hazard－Fire safety engineering
GB/T 5169.26-2018 Fire hazard testing for electric and electronic products—Part 26: Smoke obscuration—Summary and relevance of test methods
GB/T 5169.30-2020 Fire hazard testing for electric and electronic products—Part 30: Heat release—Summary and relevance of test methods
GB/T 5169.20-2021 Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods
GB/T 5169.9-2021 Fire hazard testing for electric and electronic products—Part 9: Guidance for assessing the fire hazard—Preselection testing procedures—General guidelines
GB/T 5169.5-2020 Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance
GB/T 5169.46-2020 Fire hazard testing for electric and electronic products—Part 46: Test flames—Determination of the characteristic heat flux for ignition from a non-contacting flame source

Professional Standard - Machinery, Electrical and electronic products

JB/T 11039-2010 Type completion method of electric and electronic products for plateau

Korean Agency for Technology and Standards (KATS), Electrical and electronic products

KS C 0285-1997 Environmental testing Part 2 test methods Test Z/ABDM : Climatic sequence
KS C 0226-2001 Basic environmental testing procedures Part 2:TGests-Test Q:Sealing
KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
KS C 0261-1995 Fire hazard testing Part 2:Test methods Section 2:Needle-flame test
KS C 0210-1998 Environmental testing Part 1 : General and guidance
KS C 0296-1999 Fire hazard testing Part 7：Guidance on the minimization of toxic hazards due to fires involving electrotechnical products Section 1：General
KS C 0283-1997 Environmental testing part 2 : Tests-Guidance for damp heat tests
KS C 0241-1998 Basic environmental testing procedures Part 2 : Tests Test Ea and guidance : Shock
KS C 0250-2005 Basic environmental testing procedures－Part 2：Tests Test T：Soldering
KS C 0284-2002 Environmental testing-Tests-Test R and guidance:Water
KS C IEC 63000:2019 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
KS C 0238-2001 Basic environmental testing procedures Part 2 : Tests-Test Ga and guidance : Acceleration, steady state
KS C 0242-1999 Basic environmental testing procedures Part 2：Tests Test Eb and guidance：Bump
KS C 0211-1995 Fire hazard testing part 1 : Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products Guidance for electronic components
KS C 0220-1999 Environmental testing procedures Part 2:Tests, Tests A:Cold
KS C 0229-2001 Basic environmental testing procedures Part 2 : Tests, Test M : Low air pressure
KS C 0244-2001 Environmental testing Part 2：Tests－Test Ed：Free fall
KS C 0252-2004 Environmental testing－Part 2：Tests. Test XA and guidance：Immersion in cleaning solvents
KS C 0278-1997 Classification of environmental conditions Part l : Classification of environmental parameters and their severities
KS C 0224-2010 Basic environmental testing procedures salt mist, cyclic(sodium chloride solution)
KS C 0224-1990 basic environmental testing procedures tests--test ka:salt mist
KS C 0222-1989 Basic environmental testing procedures part 2:tests, test ca:damp heat, steady state
KS C 0248-60-2005 Environmental testing-Part 2:Tests- Test Ke:Flowing mixed gas corrosion test
KS C 0221-1999 Basic environmental testing procedures Part 2:Tests, Tests B:Dry heat
KS C 0225-2001 Basic environmental testing procedures- Part 2:Tests-Test N:Change of temperature
KS C 0240-1998 Basic environmental testing procedures Part 2 : Tests Test Fc and guidance : Vibration (sinusoidal)
KS C 0251-2001 Environmental testing－Part 2－21： Tests－Test U： Robustness of terminations and integral mounting devices
KS C 0237-1999 Environmental testing test Cb:Damp heat, steady state
KS C 0239-1995 Environmental testing Part 2:Test methods Test Eg:Impact, spring hammer.
KS C 0236-1994 Basic environmental testing procedures Test Ta:Soldering Solderability testing by the wetting balance method
KS C 0201-2001 Terminology concerning fire test
KS C 0233-2001 Environmental testing Part 2：Tests－ Test Z/AM：Combines cold/low air pressure tests
KS C 0234-2001 Environmental testing Part 2：Tests－ Test Z/BM：Combined dry heat/low air pressure tests
KS C 0243-2001 Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens
KS C 0228-2001 Basic environmental testing procedures - Part 2 : Tests, Test Z/AD : Composite temperature/humidity cyclic test
KS C 0227-2001 Basic environmental testing procedures-Part 2 : Tests-Test Db and guidance : Damp heat, cyclic(12+12-hour cycle)
KS C 0275-1997 Fire hazard testing Part 5 : Assessment of potentia1 corrosion damage by fire effluent
KS C 0213-1995 An appraisal of the problems of accelerated testing for atmospheric corrosion
KS C 0246-2001 Basic environmental testing procedures Part 2：Tests-test Kd： Hydrogen sulphide test for contacts and connections
KS C 0295-2004 Fire hazard testing－Part 11－3：Test flames－500 W flames－Apparatus and confirmational test methods
KS C 0230-2005 Fire hazard testing－Part 2：Test methods－ Bad-connection test with heaters
KS C 0274-1997 Fire hazard testing Part 2 : Test methods-Section 4/sheet 1 : 1kW nominal pre-mixed test flame and guidance
KS C 0245-2001 Basic environmental testing procedures Part 2 : Tests-Test Kc : Sulphur dioxide test for contacts and connections
KS C 0212-1995 Basic environmental testing procedures Part 2 : Tests Guidance to Test Kd : Hydrogen sulphide test for contacts and connections
KS C 0273-1997 Fire hazard testing Part 2 : Test methods-Section 4/sheet 0 : Diffusion type and premixed type flame test methods
KS C 0248-59-2001 Environmental testing－Part 2：Test methods－ Test Fe : Vibration－Sine-beat method
KS C 0288-2002 Environmental testing－Fire hazard testing－Part 1－1：Guidance for Assessing the fire hazard of electrotechnical products－General guidelines
KS C 0254-11-2001 Fire hazard testing Part 2：Test methods－ Section 1/sheet 1：Glow-wire end-product test and guidance
KS C 0276-1997 Background environmental testing procedures Part2 : Tests Guidance to Test Kc : Sulphur dioxide test for contacts and connections
KS C 0260-2001 Fire hazard testing-Part 2 : Test methods- Section 1/sheet 0 : Glow-wire test methods-General
KS C 0254-12-2001 Fire hazard testing Part 2：Test methods－ Section 1/sheet 2：Glowwire flammability test on materials
KS C 0254-13-2001 Fire hazard testing Part 2：Test methods－ Section 1/sheet 3：Glow-wire ignitability test on materials
KS C 0292-1997 Environmental testing Part 2 : Test methods- Test Fh : Vibration, broad-band random (digital contro1) and guidance
KS C 0287-2002 Environmental test－Tests－Test Td：Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting device(SMD)
KS C 0293-1999 Basic environmental testing procedures Part 2：Tests.Tests Z ¤ AFc：Combined cold ¤ vibration(sinusoidal) tests for both heatdissipating and nonheatdissipating specimens
KS C 0294-1999 Basic environmental testing procedures Part 2:TestsGuidance to tests Z/AFc and Z/BFc:Combined temperature (cold and dry heat) and vibration(sinusoidal) tests
KS C 0289-1997 Basic environmental testing procedures Part 2 : Tests Tests Z/BFc : Combined dry heat/ vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
KS C 0258-2-2001 Fire hazard testing - Part 5:Assessment of potential corrosion damage by fire effluent-Section 2:Guidance on the selection and use of test methods
KS C 0290-1997 Fire hazard testing Part l : Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products Guidance for use preselection procedures

Professional Standard - Agriculture, Electrical and electronic products

GB 4798.2-1996 Environmental conditions and transportation of electrical and electronic products
GB 4798.2-2021 Environmental conditions and transportation of electrical and electronic products

Group Standards of the People's Republic of China, Electrical and electronic products

T/CSIQ 68001-2020 Water proofing performance test for electric and electronic products —Pneumatic method

Professional Standard - Energy, Electrical and electronic products

NB/T 10725-2021 Electromagnetic compatibility requirements and test methods for electrical and electronic products used in coal mines

Professional Standard - Railway, Electrical and electronic products

TB/T 3213-2009 General technical specification of electric and electronic products-used on rolling stock for plateau

International Electrotechnical Commission (IEC), Electrical and electronic products

IEC 63000:2016 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
IEC 60068-2-75:1997 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60695-9-2:2001 Fire hazard testing for electric and electronic products - Part 20: Surface spread of flame - Summary and relevance of test methods
IEC 60695-1-30:2002 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products; Use of preselection testing procedures

KR-KS, Electrical and electronic products

KS C IEC 63000-2019 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances

German Institute for Standardization, Electrical and electronic products

DIN EN 62474:2013 Material declaration for products of and for the electrotechnical industry (IEC 62474:2012); German version EN 62474:2012
DIN-Fachbericht IEC/PAS 61906:2008 Procedure for the declaration of materials in products of the electrotechnical and electronic industry; German version IEC/PAS 61906:2005

Professional Standard - Coal, Electrical and electronic products

MT 209-1990 General technical requirements for electrical and electronic products used in coal mine communication, detection and control
MT 210-1990 Basic test methods for electrical and electronic products used in coal mine communication, detection and control
MT 211-1990 Quality inspection rules for electrical and electronic products used in coal mine communication, detection and control
MT/T 210-1990
MT/T 211-1990

CN-STDBOOK, Electrical and electronic products

图书 3-8689 Compilation of National Standards for Environmental Testing of Electrical and Electronic Products (6th Edition) Volume 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Electrical and electronic products

GB/T 5170.1-2016 Inspection methods for environmental testing equipments for electric and electronic products—Part 1：General
GB/T 20626.1-2017 Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements
GB/T 13951-2016 General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations
GB/T 13952-2016 Parametric classification of environmental conditions of electric and electronic products for mobile platforms and offshore installations
GB/T 5170.5-2016 Inspection methods for environmental testing equipments for electric and electronic products—Part 5：Damp heat testing equipments

TR-TSE, Electrical and electronic products

TS 3185-1978 Basic Environmental Testing Procedures For Electronic Components And Electronic Equipment Part 2 : Test Guidance For Damp Heat Tests

CZ-CSN, Electrical and electronic products

CSN 34 5791 Cast.2-40-1989 Eiectrotcchmcai and electronic products. Basic environmental testing procedures.

IEC - International Electrotechnical Commission, Electrical and electronic products

PAS 61906-2005 Procedure for the declaration of materials in products of the electrotechnical and electronic industry (Edition 1.0)