ZH

RU

ES

Determination method of gas content in insulating oil

Determination method of gas content in insulating oil, Total:443 items.

In the international standard classification, Determination method of gas content in insulating oil involves: Insulating fluids, Power stations in general, Transformers. Reactors, Insulating materials, Petroleum products in general, Lubricants, industrial oils and related products, Waxes, bituminous materials and other petroleum products, Analytical chemistry, Natural gas, Wastes, Air quality, Energy and heat transfer engineering in general, Fuels, Construction materials, Vocabularies, Crude petroleum, Organic chemicals, Protection against fire, Fibre optic communications, Edible oils and fats. Oilseeds, Products of the chemical industry, Inorganic chemicals, Tobacco, tobacco products and related equipment, Electricity. Magnetism. Electrical and magnetic measurements, Sugar. Sugar products. Starch, Electrical wires and cables, Extraction and processing of petroleum and natural gas, Raw materials for rubber and plastics, Soil quality. Pedology, Insulation, Pesticides and other agrochemicals, Non-destructive testing, Physics. Chemistry, Inks. Printing inks, Test conditions and procedures in general, Electrical accessories, Glass, Burners. Boilers, Earthworks. Excavations. Foundation construction. Underground works, Food products in general, General methods of tests and analysis for food products, Paint ingredients, Ferrous metals, Farming and forestry.


Professional Standard - Electricity, Determination method of gas content in insulating oil

  • DL/T 703-1999 Determination of dissolved gas content in insulating oil by gas chromatography
  • DL/T 703-2015 Determination of dissolved gas content in insulating oil by gas chromatography
  • DL/T 423-2009 Determination of dissolved gas content in insulatingoil.Method of vacuum pressure difference
  • DL 423-1991 Determination of gas content in insulating oil Differential-vacuum-pressure method
  • DL 450-1991 Method of test for gas content in insulating oil (CO2 elution method)
  • DL/T 702-1999 Determination of furfural content in mineral insulating oil by spectrophotometric method
  • DL/T 2406-2021 Gas Chromatography Method for Detection of Dissolved Sulfur Hexafluoride Gas Content in Insulating Oil
  • DL/T 580-2013 Method for measuring average moisture content in insulating paper in transformers by dew point measurement
  • DL/T 580-1995 Method for measuring average moisture content in insulating paper in transformers by dew point measurement
  • DL/T 1459-2015 Quantitative determination of metal passivators in mineral insulating oils (HPLC)
  • DL/T 1458-2015 Determination of copper, iron, aluminum and zinc contents in mineral insulating oil-Atomic absorption spectrometry method
  • DL/T 1550-2016 Method for Determination of Copper and Iron Content in Mineral Insulating Oil Rotating Disk Electrode Emission Spectrometry
  • DL/T 1460-2015 Test method for quantitative determination of corrosive sulfur in mineral insulating oils Copper powder corroding test
  • DL/T 2218-2021 Quantitative detection method of corrosive sulfur dibenzyl disulfide in insulating oil by gas chromatography multiplex mass spectrometry
  • DL/T 1824-2018 Method for the determination of acetone content in operating transformer oil by headspace gas chromatography

British Standards Institution (BSI), Determination method of gas content in insulating oil

  • BS 6470:1984 Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard
  • PD IEC/TR 62036:2007 Mineral insulating oils. Oxidation stability test method based on differential scanning calorimetry (DSC)
  • BS DD 220:1994 Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
  • BS 2000-454:2000 Methods of test for petroleum and its products - Determination of phosphorus in gasoline - Spectrophotometric method
  • BS 2000-455:2011 Methods of test for petroleum and its products. Determination of the manganese content of gasoline. Atomic absorption spectrometry (AAS) method
  • PD IEC/TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids. Test method for quantitative determination of elemental sulfur
  • BS EN 12177:2000 Methods of test for petroleum and its products - Liquid petroleum products - Unleaded petroleum - Determination of benzene content by gas chromatography
  • BS EN 12177:2002 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography
  • BS EN 12177:2000(2002)*BS 2000-425:2002 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography
  • BS 2000-456:2000 Methods of test for petroleum and its products - Determination of potassium in gasoline - Atomic absorption spectrometry (AAS) method
  • BS 2000-455:2001 Determination of manganese in gasoline - Atomic absorption spectrometry (AAS) method
  • BS 2000-137:1993 Methods of test for petroleum and its products - Determination of oil content of water mix metalworking oil dilutions
  • DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
  • PD IEC/TR 62697-2:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids. Test method for quantitative determination of total corrosive sulfur (TCS)
  • BS PD CEN/TR 15139:2005 Petroleum products and other liquids - Applicability of test methods on sulfur determination in petrol and diesel fuel
  • 23/30457108 DC BS ISO 7383. Fine bubble technology. Evaluation method for determining oxygen content in fine bubble dispersions in water
  • BS 2000-272:2000 Methods of test for petroleum and its products - Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG) - Electrometric titration method
  • BS 2000-272:2002 Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method
  • BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method

Professional Standard - Commodity Inspection, Determination method of gas content in insulating oil

  • SN/T 1792-2014 Determination of polychlorinated biphenyls in electrical insulating oil.Gas chromatography
  • SN/T 1792-2006 Determination of polychlorinated biphenyls in electrical insulating oil.Gas chromatography
  • SN/T 1098-2010 Determination of α-terpineol content in pine oil and terpineol for import and export.Gas chromatography method
  • SN/T 0513-1995 Natural wintergreen oil for export.Determination of methyl salicylate content--Gas chromatographic method
  • SN/T 3599-2013 Determination of organic oxygenate compounds and benzene content in gasoline.Two-dimensional gas chromatography using a heart-cutting system
  • SN/T 1098-2002 Determination of α-terpineol content in pine oil and terpineol for import and export.Gas chromatography method on capillary column
  • SN/T 1044-2002 Determination of 1,8-cineol content in natural oil of eucalyptus globulus labillardiere for export.Gas chromatography
  • SN/T 1044-2001 Determination of 1,8-cineole content in natural eucalyptus oil for export by gas chromatography
  • SN/T 1510-2005 Determination of citronellal and oxygenous compounds in natural citronella oil for export - Gas chromatography method
  • SN 0043-1992 Method for inspection of PONA of naphtha for exportMethod for test of olefinic plusaromatics hydrocarbons in petroleum distilates
  • SN/T 1945-2007 Determination of trans fatty acids in foods.Capillary gas chromatography

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination method of gas content in insulating oil

  • GB/T 17623-1998 Determination of componental contents of gases dissolved in insulating oil by gas chromatography method
  • GB/T 7603-2012 Determination of the aromatic carbon content in mineral insulating oil
  • GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
  • GB/T 12208-1990 Determination of coal tar and dust of gas in urban area
  • GB/T 32508-2016 Quantitative determination of corrosive sulfur (dibenzyl disulfide, DBDS) in insulating liquids
  • GB/T 22501-2008 Animal and vegetable fats and oils.Determination of wax content of olive oils by gas chromatography
  • GB/T 18932.6-2002 Method for the determination of glycerol contents in honey--UV spectrophotometric method
  • GB/T 24199-2009 Refined pyridine.Determination of pyridine content.Gas chromatographic method
  • GB/T 28769-2012 Test method for determination of free glycerol content in Fatty Acid Methyl Esters(FAME) by gas chromatography
  • GB/T 31749-2015 Method for the determination of active content of molinate emulsifiable concentrate.Gas chromatography (GC)
  • GB/T 5009.204-2005 GC-MS method for determination of acrylamide in food

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination method of gas content in insulating oil

  • GB/T 17623-2017 Determination of componental contents of gases dissolved in insulating oil by gas chromatography method

American Society for Testing and Materials (ASTM), Determination method of gas content in insulating oil

  • ASTM D2945-90(2003) Standard Test Method for Gas Content of Insulating Oils
  • ASTM D2945-90(1998) Standard Test Method for Gas Content of Insulating Oils
  • ASTM D2945-90(2003)e1 Standard Test Method for Gas Content of Insulating Oils
  • ASTM D2945-90(2003)e2 Standard Test Method for Gas Content of Insulating Oils
  • ASTM D2029-97 Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
  • ASTM D2029-97(2003) Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
  • ASTM D2029-97(2008) Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
  • ASTM D4059-00(2005)e1 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • ASTM D4059-00 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • ASTM D4059-00(2010) Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • ASTM D6802-02 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
  • ASTM D3635-13 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-01(2005) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-01 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D3635-90(1998) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM D2522-03 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM D2522-95 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM D2522-03(2008) Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM D2522-03(2008)e1 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM D6802-02(2010) Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
  • ASTM D2029-97(2017) Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
  • ASTM D1827-92(2002) Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
  • ASTM D1827-92(2002)e1 Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
  • ASTM D6053-00 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
  • ASTM D3231-99 Standard Test Method for Phosphorus in Gasoline
  • ASTM D3231-89 Standard Test Method for Phosphorus in Gasoline
  • ASTM D6181-03 Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin
  • ASTM D6181-97 Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin
  • ASTM D6053-08 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
  • ASTM D6053-03 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
  • ASTM D6053-14(2018) Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
  • ASTM C1616-05 Standard Test Method for Determining the Moisture Content of Inorganic Insulation Materials by Weight
  • ASTM D1827-92(1996)e1 Standard Test Method for Gas Content (Nonacidic) of Insulating Liquids by Displacement with Carbon Dioxide
  • ASTM D6053-14 Standard Test Method for Determination of Volatile Organic Compound 40;VOC41; Content of Electrical Insulating Varnishes
  • ASTM D3246-05 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
  • ASTM C1616-07(2012) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
  • ASTM D3246-14 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
  • ASTM D3246-15 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
  • ASTM D4929-99 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-04 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-15a Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM UOP845-90 Trace Alcohols in LPG by GC
  • ASTM D6113-11 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ASTM D6113-16 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ASTM D7716-11a Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
  • ASTM UOP377-90 Free Sulfur in LPG by Mercury Number
  • ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
  • ASTM D3635-13(2021) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • ASTM C1616-07(2018) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
  • ASTM D3237-97 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D4573-22 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
  • ASTM D4929-19a Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-99e1 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4006-07 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D4929-19 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-07(2014) Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-16 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • ASTM D4929-15 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM D3525-93(2002)e1 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
  • ASTM D2622-98 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D2622-94 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
  • ASTM D2622-08 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D6113-02 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ASTM E2269-21 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
  • ASTM D1142-95(2000) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D1142-95(2021) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
  • ASTM E2269-03 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
  • ASTM E2269-05 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
  • ASTM D3237-06 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D3237-02 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D8150-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
  • ASTM D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D4573-03(2018) Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
  • ASTM D3606-99 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D3606-92 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D3606-10 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D1868-93(1998) Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • ASTM D1868-20 Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • ASTM E2269-14 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
  • ASTM D1868-07 Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • ASTM D1868-13 Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • ASTM D95-99 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D95-99e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D4312-95a(2005) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D5059-13 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D4377-00(2006) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D4377-00e1 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D4377-00 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D7551-10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • ASTM D3228-08(2014) Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
  • ASTM D6786-15 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
  • ASTM D6786-08 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
  • ASTM D3606-06e1 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D3606-06 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D3606-04a Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM E2323-04 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
  • ASTM C231/C231M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM D4573-03 Standard Test Method for Rubber Chemicals8212;Determination of Oil Content in Oil-Treated Sulfur
  • ASTM D5564-95 Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
  • ASTM D5564-95(2001) Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
  • ASTM D5564-95(2006) Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
  • ASTM D5564-95(2011) Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
  • ASTM D2668-07(2021) Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di
  • ASTM D6550-00 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
  • ASTM D6550-05 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
  • ASTM D6550-10 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
  • ASTM D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D7151-05 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • ASTM D3606-07 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D2216-98 Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
  • ASTM C1335-23 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
  • ASTM C173/C173M-01e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • ASTM C231-97e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231/C231M-22 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C173/C173M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • ASTM C231-08 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-08a Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-08b Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-08c Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-09 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-09a Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM D1142-95(2006) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM E2649-09 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
  • ASTM D5186-20 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
  • ASTM D5186-19 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
  • ASTM D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D3831-98 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3831-01 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3831-01(2006) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D95-05 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D95-05e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D3831-12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D95-13 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D95-23 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D7371-12 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D5762-11 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D7551-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • ASTM D8302-20 Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography
  • ASTM C231-04 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231-03 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM D1142-95(2012) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • ASTM C231/C231M-09b Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM D7371-07 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D2216-05 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
  • ASTM D5501-94(1998)e1 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
  • ASTM D5501-20 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography
  • ASTM D4294-03 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
  • ASTM D4047-00(2005) Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
  • ASTM D6550-15 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
  • ASTM D5762-12(2017) Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

PL-PKN, Determination method of gas content in insulating oil

  • PN E04419-02-1991 Electrical insulating materials Determination of water in mineral insulating oils by the Karl Fischer method
  • PN C04137-1972 Petroleum products Determinat?on of phenols content in cutback bitumen for insulating purposes
  • PN C04193-1992 Petroleum products Gasoline Determination of lead content Iodine monochloride method
  • PN Z04071-1961 Determination of vapor n-butyl alcohol con?ens in air. Speedy me?hod
  • PN Z04227-02-1992 Air purity protection ests for kerosene content etermination of kerosene vapours n work places by gas chromatography
  • PN Z04072-1961 Determination of Thionyl Chloride Vaponr Contens in Air. Speedy Method
  • PN C04196-1992 Petroleum products Determination of C1-C4 alcohols and MTBE content and calculation of total oxygen content m gasolineby gas chromatography method
  • PN-EN 17178-2020-01 P Liquid petroleum products--Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

International Electrotechnical Commission (IEC), Determination method of gas content in insulating oil

  • IEC 60590:1977/COR1:1978 Determination of the aromatic hydrocarbon content of new mineral insulating oils; Corrigendum 1
  • IEC 60590:1977 Determination of the aromatic hydrocarbon content of new mineral insulating oils
  • IEC 60733:1982 Determination of water in insulating oils, and in oil-impregnated paper and pressboard
  • IEC 60814:1985 Determination of water in insulating liquids by automatic coulometric Karl Fischer titration
  • IEC TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 3: Test method for quantitative determination of elemental sulfur
  • IEC 60589:1977/COR1:1978 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids; Corrigendum 1
  • IEC 60589:1977 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • IEC TR 62697-2:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 2: Test method for quantitative determination of total corrosive sulfur (TCS)
  • IEC 62697-1:2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)

YU-JUS, Determination method of gas content in insulating oil

  • JUS B.H8.415-1991 Determination of the aromatic hydrocarbon content of new mineral insulating oils
  • JUS B.H8.080-1996 Petroleum and petroleum products - Determination of aromatic hydrocarbons content in light naphthas and aviation gasolines - Gas chromatographic method
  • JUS H.B8.702-1997 Basic petroleum products - Detertnination of hydrocarbons content in high-purity ethylene - Gas chromatographic method

RU-GOST R, Determination method of gas content in insulating oil

  • GOST 13003-1988 Insulating oils. Method of gas stability determination in electric field
  • GOST R 52908-2008 Thermal insulating products for building applications. Method for determination of organic content
  • GOST 11244-1976 Petroleum. Method for the determination of distillation and residue oils potential content
  • GOST R 51973-2002 Cigarettes. Determination of water content in smoke condensate. Gas-chromatographic method
  • GOST R 51974-2002 Cigarettes. Determination of nicotine content in smoke condensate. Gas-chromatographic method
  • GOST R 50279.9-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" mercury content of the pigment portion of the paint and of the liquid portion of waterdelutable paints. Flameless atomic absorption spectrometric method

Professional Standard - Energy, Determination method of gas content in insulating oil

  • DL/T 2471-2021 Measurement method of relative content of soluble degradation products in insulating oil
  • NB/SH/T 0923-2016 Determination of element content in insulating oil by inductively coupled plasma atomic emission spectrometry
  • DL/T 2407-2021 Field Detection Method of Gas Content in Transformer Oil
  • NB/SH/T 0663-2014 Standard test method for determination of alcohols and ethers in gasoline by gas chromatography
  • NB/SH/T 6004-2020 Determination of Alcohols, Ethers and Ketones in Naphtha by Gas Chromatography
  • DL/T 2445-2021 Determination of Methanol Content in Running Transformer Oil by Gas Chromatography-Mass Spectrometry

Association Francaise de Normalisation, Determination method of gas content in insulating oil

  • NF C27-229:1985 Determination of water in insulating oils, and in oil-impregnated paper and pressboard.
  • NF C27-225:1978 Determination of the aromatic hydrocarbon content of new mineral insulating oils.
  • NF C27-227:1981 Detection and determination of specified anti-oxidant additives in insulating oils.
  • NF C27-234:1990 Determination of polychlorinated biphenyle (pcbs) in mineral insulating oils by packed column gas chromatography (gc).
  • NF V37-026:1992 CIGARETTES. DETERMINATION OF NICOTINE IN SMOKE CONDENSATES. GAS-CHROMATOGRAPHIC METHOD.
  • NF EN 50414:2006 Méthodes d'analyse du plomb dans le PVC prélevé de l'enveloppe isolante et des gaines des câbles électriques et à fibres optiques - Méthode A : détermination de la teneur totale en plomb par spectrométrie atomique d'absorption dans la flamm...
  • NF EN 60814:1998 Isolants liquides. Cartons et papiers imprégnés d'huile - Détermination de la teneur en eau par titrage coulométrique de Karl Fischer automatique.
  • NF X43-011:1975 Air pollution. Determination of gaseous sulphur compounds in ambient air sampling equipment and method.
  • FD CEN/TR 15139:2006 Produits pétroliers et autres liquides - Évaluation de méthodes d'essai de détermination de la teneur en soufre dans l'essence et le gazole
  • NF ISO 8573-5:2003 Air comprimé - Partie 5 : méthodes d'essai pour la détermination de la teneur en vapeurs d'huile et en solvants organiques
  • NF EN 62697-1:2013 Méthodes d'essai pour la détermination quantitative des composés de soufre corrosif dans les liquides isolants usagés et neufs - Partie 1 : méthode d'essai pour la détermination quantitative du disulfure de dibenzyle (DBDS)
  • NF T60-264:2002 Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method.

Korean Agency for Technology and Standards (KATS), Determination method of gas content in insulating oil

Danish Standards Foundation, Determination method of gas content in insulating oil

  • DS/HD 382:1999 Determination of the aromatic hydrocarbon content of new mineral insulating oils
  • DS/EN 61144:1994 Test method for determination of oxygen index of insulating liquids
  • DS/EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le

European Committee for Electrotechnical Standardization(CENELEC), Determination method of gas content in insulating oil

  • HD 382-1978 Determination of the Aromatic Hydrocarbon Content of New Mineral Insulating Oils
  • HD 415-1980 Detection and Determination of Specified Anti-Oxydant Additives in Insulating Oils
  • EN 60814:1997 Insulating Liquids - Oil-Impregnated Paper and Pressboard Determination of Water by Automatic Coulometric Karl Fischer Titration
  • EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le

AENOR, Determination method of gas content in insulating oil

  • UNE 21320-34:1983 DETERMINATION OF THE AROMATIC HYDROCARBON CONTENT OF NEW MINERAL INSULATING OILS.
  • UNE-EN 50414:2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le
  • UNE 55118:1979 SHORT CHAIN FATTY ACIDS DETERMINATION AND COMPOSITION OF THE FATTY ACIDS FRACTION FROM THE BUTTER FAT BY GAS CHROMATOGRAPHY

Group Standards of the People's Republic of China, Determination method of gas content in insulating oil

  • T/CEC 125-2016 Determination method of total corrosive sulfur content in mineral insulating oil
  • T/CEEIA 319-2018 Nondestructive method to test the moisture content of insulation paper for oil-immersed bushing
  • T/CEC 423-2020 Determination of Sulfur, Phosphorus and Chlorine Content in Mineral Insulating Oils and Lubricating Oils Energy-dispersive X-ray Fluorescence Spectrometry
  • T/FSI 102-2023 Determination of Hydrogen Content in Hydrogen Silicone Oil by Headspace Gas Chromatography
  • T/SDAQI 031-2021 Determination of methanol content in liquefied petroleum gas by gas chromatography
  • T/CCOA 32-2020 Determination of wax content and composition in sunflower oil by gas chromatography
  • T/CEC 539-2021 Determination of Total Sulfur Content in Transformer Oil by Gas Chromatography-Flame Photometry
  • T/CEC 217-2019 Method for determination of particle content in sulfur hexafluoride gas - Light scattering method
  • T/NAIA 016-2020 Determination of four metal antiknock agents in light oil products by gas chromatography-mass spectrometry

IN-BIS, Determination method of gas content in insulating oil

Professional Standard - Petrochemical Industry, Determination method of gas content in insulating oil

  • NB/SH/T 0207-2010 Standard test method for water in insulating liquids by coulometric Karl Fischer titration
  • SH/T 0803-2007 Insulating liquids- Contamination by polycblorinated biphenyls (PCBs)- Method of determination by capillary column gas chromatography
  • NB/SH/T 0474-2010 Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography
  • SH/T 0792-2007 Standard test method for 2,6-di-tert-butyl-p-cresol and 2,6-di-tert-butyl phenol in electrical insulating oil by infrared absorption
  • SH/T 0713-2002 Standard test method for determination of benzene and toluene in finished motor and aviation gasoline by gas chromatography

Standard Association of Australia (SAA), Determination method of gas content in insulating oil

  • AS 1767.2.4:1999 Insulating liquids - Test methods - Detection and determination of specified anti-oxidant additives in insulating oils
  • AS 1767.2.7:1999 Insulating liquids - Test methods - Determination of PCB contamination in insulating liquids by capillary column gas chromatography - Identification of congeners
  • AS 1012.4.3:2014 Methods of testing concrete, Method 4.3: Determination of air content of freshly mixed concrete — Measuring air volume when concrete is dispersed in water

工业和信息化部, Determination method of gas content in insulating oil

  • HG/T 5016-2016 Determination method of fluorine content in fluorine-containing waste gas
  • QB/T 2623.10-2021 Soap Test Methods Determination of Glycerin Content in Soap

Japanese Industrial Standards Committee (JISC), Determination method of gas content in insulating oil

Lithuanian Standards Office , Determination method of gas content in insulating oil

  • LST 1795-2002 Determination of the aromatic hydrocarbon content of new mineral insulating oils [HD 382 S1:1979 (IEC 60590:1977)]
  • LST EN 50414-2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le

SA-SASO, Determination method of gas content in insulating oil

  • SASO SSA 256-1981 METHODS OF TEST FOR GASOLINE - DETERMINATION OF LOW LEAD CONTENT IN GASOLINE
  • SASO SSA 270-1982 METHODS OF TEST FOR GASOLINE DETERMINATION OF THE HIGH LEAD CONTENT IN GASOLINE BY IODINE MONOCHLORIDE METHOD

国家市场监督管理总局、中国国家标准化管理委员会, Determination method of gas content in insulating oil

  • GB/T 40508-2021 Determination of tar and dust concentrations in biomass-based synthetic gas
  • GB/T 38608-2020 Method for determination of the volatile organic compounds (VOCs) content in the ink

国家能源局, Determination method of gas content in insulating oil

  • SH/T 0923-2016 Determination of elemental content in insulating oil by inductively coupled plasma atomic emission spectrometry
  • NB/SH/T 6054-2022 Determination of the four metal anti-knocking agents content in gasoline Gas-chromatography-mass Spectrometry

AR-IRAM, Determination method of gas content in insulating oil

German Institute for Standardization, Determination method of gas content in insulating oil

  • DIN IEC 60590:1986-09 Determination of the aromatic hydrocarbon content of new mineral insulating oils; identical with IEC 60590, edition 1977
  • DIN 51784:1983 Testing of liquid fuels; determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation
  • DIN 51454:2022-11 Testing of lubricants - Determination of fuel content in used engine oils - Gas chromatography method
  • DIN 51639-4:2020-11 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry
  • DIN EN 62535:2009 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil (IEC 62535:2008); German version EN 62535:2009
  • DIN EN 50414:2007 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le
  • DIN 51375-2:2001-06 Testing of lubricants - Determination of 1,2-ethanediol content of motor oils - Part 2: Gas chromatography
  • DIN 55901:2018 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers

API - American Petroleum Institute, Determination method of gas content in insulating oil

Henan Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB41/T 1425-2017 Determination of Methylal Content in Gasoline by Gas Chromatography
  • DB41/T 740-2012 Method for Determination of Glyceryl Triacetate Content in Cellulose Acetate Filter Sticks Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry

Sichuan Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB51/T 1921-2014 Determination of Toluene Content in Nail Polish by Gas Chromatography
  • DB51/T 1699-2013 Determination of total sulfur content in liquefied petroleum gas (LPG) by ultraviolet fluorescence method
  • DB51/T 2182-2016 Determination of Aniline Content in Motor Gasoline by Gas Chromatography

GOSTR, Determination method of gas content in insulating oil

  • GOST 11244-2018 Petroleum. Method for determination of potential content of distillation and residue oils

CO-ICONTEC, Determination method of gas content in insulating oil

国家质量监督检验检疫总局, Determination method of gas content in insulating oil

  • SN/T 4438-2016 Determination of methanol content in crude oil by multidimensional gas chromatography

American National Standards Institute (ANSI), Determination method of gas content in insulating oil

  • ANSI/ASTM D6113:2011 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ANSI/ASTM D3237:2002 Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02)
  • ANSI/ASTM D6053:2008 Test Method for Determination of Volatile Organic Compound (VOC) Content of Electric Insulating Varnishes
  • ANSI/ASTM D1868:2013 Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • ANSI/ASTM D6113:2002 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • ANSI/ASTM D6113:2003 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

Professional Standard - Aviation, Determination method of gas content in insulating oil

  • HB/Z 338.2-1999 Aluminum alloy insulating anodic oxidation solution analysis method EDTA volumetric method for determination of aluminum content
  • HB/Z 338.1-1999 Analytical method of aluminum alloy insulated anodic oxidation solution redox titration determination of oxalic acid content

未注明发布机构, Determination method of gas content in insulating oil

  • BS 3900-B15:1987(2008) Methods of test for paints Part B15 : Rapid method for estimation of lead in liquid paints
  • BS 2000-272:2000(2010) Methods of test for petroleum and its products — BS 2000 - 272 : Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG) — Electrometric titration method
  • BS EN ISO 15304:2002(2006) Animal and vegetable fats and oils — Determination ofthe content oftrans fatty acid isomers of vegetable fats and oils — Gas chromatographic method

AT-ON, Determination method of gas content in insulating oil

  • ONORM DIN 10312-2-1992 Gravimetric method for the determination of fat content of milk and milk products - Method for cream
  • ONORM DIN 10463-1994 Determination of non-fat solids content of butter. Routine method
  • ONORM DIN 10322-1993 Determination of water content, solids-not-fat and fat contents of butter on the same test portion - Reference method

IX-SA, Determination method of gas content in insulating oil

Guangxi Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB45/T 1245-2015 Determination of Methylal Content in Gasoline by Gas Chromatography-Mass Spectrometry
  • DB45/T 1453-2016 Determination of Oleic Acid Content in Leech Broadbodied by Gas Chromatography
  • DB45/T 2256-2021 Determination of Caryophyllene Content in Heavy Turpentine Oil by Gas Chromatography
  • DB45/T 1244-2015 Determination of Aniline Compounds in Gasoline by Gas Chromatography-Mass Spectrometry
  • DB45/T 885-2012 Determination of Linalool and Camphor in Cinnamomum camphora Leaf (Essential) Oil by Capillary Column Gas Chromatography

Professional Standard - Agriculture, Determination method of gas content in insulating oil

  • NY/T 3111-2017 Determination of Sterol Content in Vegetable Oil by Gas Chromatography-Mass Spectrometry
  • NY/T 2005-2011 Determination of tans fatty acids in animal and vegetable fats and oils.GC

Military Standard of the People's Republic of China-General Armament Department, Determination method of gas content in insulating oil

  • GJB 770.309-1991 Test methods for gunpowder analysis - Determination of nitroglycerin content - Gas measurement method
  • GJB 770.306-1989 Test methods for gunpowder analysis - Determination of the content of nitroglycerin, gina and No. 2 neutralizing agent in double base powder by gas chromatography

Anhui Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB34/T 3242-2018 Determination of Dimethoxymethane Content in Gasoline by Gas Chromatography
  • DB34/T 2086-2014 Determination method of N-methylpyrrolidone content in lubricating oil by headspace gas chromatography
  • DB34/T 2508-2015 Determination of Esters and Methylanilines in Gasoline by Gas Chromatography

VN-TCVN, Determination method of gas content in insulating oil

  • TCVN 5123-1990 Content of carbon in exhaust gases of automobiles with petrol engines.Rates and methods of determination
  • TCVN 6703-2010 Standard test method for determination of benzene and toluene in finished motor and aviation gasoline by gas chromatography

Fujian Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB35/T 1351-2013 Determination of total sulfur content in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence method

Shaanxi Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB61/T 947-2014 Determination of Fatty Acid Methyl Esters in Biodiesel Feed Oil by Gas Chromatography

Professional Standard - Ferrous Metallurgy, Determination method of gas content in insulating oil

  • YB/T 5099-1993 Gas Chromatographic Determination Method of Pyridine Content in Pure Pyridine
  • YB/T 5154-1993 Gas Chromatographic Determination Method of Methylnaphthalene and Naphthalene Content in Industrial Methylnaphthalene

Jiangsu Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB32/T 3636-2019 Determination of Methylal Content in Motor Gasoline by Multidimensional Gas Chromatography

Guangdong Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB44/T 1094-2012 Determination of sec-butyl acetate content in motor gasoline by gas chromatography

KR-KS, Determination method of gas content in insulating oil

  • KS M 2408-2003(2023) Test method for determination of oxygenates in gasoline by gas chromatography
  • KS F 2449-2022 Test method for air content of fresh concrete by the volumetric method

Hebei Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB13/T 1636-2012 Determination of Dimethyl Ether Content in Liquefied Petroleum Gas Composite Fuel by Gas Chromatography

BE-NBN, Determination method of gas content in insulating oil

  • NBN T 94-203-1977 Determination of hydrogensulfide content in ambient air - Methylene blue raethod
  • NBN T 94-301-1976 Determination of nitrogen dioxyde contents of ambient air -Griess-Saltzman method
  • NBN T 94-302-1976 Determination of nitrogen oxydes and of nitrogen monoxyde contents of ambient air - Griess-Saltzman method
  • NBN T 94-201-1975 Air sampling and analysis methods — Determination of sulphur dioxide (SO2) content in ambient air — Hydrogen peroxide method

International Organization for Standardization (ISO), Determination method of gas content in insulating oil

  • ISO/DIS 7383-1:2023 Fine bubble technology — Evaluation method for determining gas content in ultrafine bubble dispersions in water — Part 1: Oxygen content
  • ISO/CD 7383-2:2023 Fine bubble technology — Evaluation method for determining gas content in fine bubble dispersions in water — Part 2: Hydrogen content
  • ISO/DIS 7383 Fine bubble technology — Evaluation method for determining oxygen content in fine bubble dispersions in water

Natural Gas Processor's Association (NGPA), Determination method of gas content in insulating oil

  • GPA STD 2188-1989 Tentative Method for the Determination of Ethyl Mercaptan in Lp-Gas Using Length of Stain Tubes

The American Road & Transportation Builders Association, Determination method of gas content in insulating oil

  • AASHTO T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
  • AASHTO T 55-2002 Standard Method of Test for Water in Petroleum Products and Bituminous Materials by Distillation
  • AASHTO T 196M/T 196-2009 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method

TH-TISI, Determination method of gas content in insulating oil

  • TIS 1182.9-1996 Standard test methods for petroleum and petroleum products.part 9: determination of phosphorus in gasoline
  • TIS 1182-1994 Standard test methods for peroleum products. Part 1: Determination of lead content in gasoline. Iodine monochloride method
  • TIS 1182.1-1993 Standard test methods for petroleum products.part 1: determination of lead content in gasoline.iodine monochloride method
  • TIS 1182.8-1996 Standard test methods for petroleum and petroleum products.prat 8 determination of benzene and toluene in motor and aviation gasoline by gas chromatography

CZ-CSN, Determination method of gas content in insulating oil

  • CSN ISO 4848:1994 Concrete.Determinatin of air content of freshly mixed concrete.Pressure method

Professional Standard - Machinery, Determination method of gas content in insulating oil

  • JB/T 4107.7-1999 Chemical analyse method for electrical contact materials.Determination of carbon content in the silver - graphite ( Determine carbon content by the gas volumetry method)

Professional Standard - Chemical Industry, Determination method of gas content in insulating oil

  • HG/T 5016~5017-2016 Determination of fluorine content in fluorine-containing waste gas and determination method of ethylenediaminetetraacetic acid disodium (EDTA) and copper content in electroless copper plating waste liquid (2016)

European Committee for Standardization (CEN), Determination method of gas content in insulating oil

  • PD CEN/TR 15139:2005 Petroleum products and other liquids Applicability of test methods on sulfur determination in petrol and diesel fuel

Inner Mongolia Provincial Standard of the People's Republic of China, Determination method of gas content in insulating oil

  • DB15/T 3075-2023 Determination Method of Harmful Microorganisms in the Air of Large-scale Sheep Farms

SG-SPRING SG, Determination method of gas content in insulating oil

  • SS 78 Pt.A6-1987 Testing Concrete Part A6: Methods For Determination Of Air Content Of Fresh Concrete

海关总署, Determination method of gas content in insulating oil

  • SN/T 5264-2020 Determination of 14 trace oxygen species in naphtha by heart-cut-two-dimensional capillary gas chromatography




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved