Machining allowance for forgings

Machining allowance for forgings, Total:41 items.

In the international standard classification, Machining allowance for forgings involves: Iron and steel products, Manufacturing forming processes.

Professional Standard - Machinery, Machining allowance for forgings

JB/T 9179.1～8-1999 Machining Allowance and Working Difference of Free Forgings on Hydraulic Press
JB/T 9179.6-1999 Machining allowances and tolerances of open forgings on hydraulic press.Die block
JB/T 9179.7-1999 Machining allowances and tolerances of open forgings on hydraulic press.Cylinder
JB/T 9179.8-1999 Machining allowances and tolerances of open forgings on hydraulic press.Ring
JB/T 9179.5-1999 Machining allowances and tolerances of open forgings on hydraulic press.Short round shaft
JB/T 9179.1-1999 Machining allowances and tolerances of open forgings on hydraulic press.General requirement
JB/T 9179.3-1999 Machining allowances and tolerances of open forgings on hydraulic press.Stepped shaft
JB/T 9179.4-1999 Machining allowances and tolerances of open forgings on hydraulic press.Disk and punched hole
JB/T 9179.6-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 6: Die block
JB/T 9179.7-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 7: Cylinder
JB/T 9179.2-1999 Machining allowances and tolerances of open forgings on hydraulic press.Round shaft,square shaft and rectangular cross-section
JB/T 9179.1-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 1: General requirements
JB/T 9179.3-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 3: Stepped shaft
JB/T 9179.5-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 5: Short round shaft
JB/T 9179.4-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 4: Disk and punched hole
JB/T 9179.8-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 8: Ring, cylinder segment and flange
JB/T 9179.2-2013 Machining allowances and tolerances of open die forgings on hydraulic press.Part 2: Round shaft, square shaft and rectangular cross-section

CZ-CSN, Machining allowance for forgings

CSN 42 9011-1969 Steel forgings in usual workmanship. Longitudinal forgings. Machining allowances and tolerances
CSN 42 9013-1969 Steel forgings in usual workmanship. Rings. Machining allowances and tolerances

Professional Standard - Aerospace, Machining allowance for forgings

QJ 1630-1989 Machining allowance and dimensional deviation of free forgings on the hammer

Professional Standard - Aviation, Machining allowance for forgings

HB 6587-1992 Machining Allowance and Dimensional Tolerance of Free Forgings on Hammer
HB 6077-2008 Tolerances and machining allowances of die forgings
HB 6077-1986 Die forging tolerances and machining allowances

Group Standards of the People's Republic of China, Machining allowance for forgings

T/CCMI 11-2021 Machining Allowance and Tolerance of Large Hot Rolled Ring Forgings

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Machining allowance for forgings

GB/T 21471-2008 Machining allowancs and tolerances for steel open die forgings on hammer.Shafts
GB/T 15826.9-1995 Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining
GB/T 15826.6-1995 Machining allowances and tolerances for steel open die forgings on hammer--Shaft without steps
GB/T 15826.4-1995 Machining allowances and tolerances for steel open die forgings on hammer--Rings
GB/T 15826.2-1995 Machining allowances and tolerances for steel open die forgings on hammer--Disks and columns
GB/T 15826.5-1995 Machining allowances and tolerances for steel open die forgings on hammer--Seamles cylinder hushings
GB/T 21469-2008 Machining allowances and tolerances for steel open die forgings on hammer.General requirement
GB/T 15826.1-1995 Machining allowances and tolerances for steel open die forgings on hammer--General requirements
GB/T 15826.7-1995 Machining allowances and tolerances for steel open die forgings on hammer--Shaft with steps
GB/T 21470-2008 Machining allowances and tolerances for steel open die forgings on hammer.Disks,columns,rings and seamless cylindrical sleeves
GB/T 15826.8-1995 Machining allowances and tolerances for steel open die forgings on hammer--Single throw crankshaft
GB/T 15826.3-1995 Machining allowances and tolerances for steel open die forgings on hammer--Disks with holes
GB/T 12362-2003 Tolerances and machining--Allowances of steel die forging

Professional Standard - Ferrous Metallurgy, Machining allowance for forgings

YB/T 3220.13-1987 Baosteel No.2 Blast Furnace Equipment Manufacturing General Technical Conditions Forging Machining Allowance

RO-ASRO, Machining allowance for forgings

STAS 7670-1983 Drop-forged steel pieces MACHINING ALLOWANCES AND TOLERANCES

Professional Standard-Ships, Machining allowance for forgings

CB/T 3474.2-1992 Tolerances and Machining Allowances of Steel Die Forgings for Marine Main and Auxiliary Engines

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Machining allowance for forgings

GB/T 12362-2016 Steel die forgings—Tolerance and machining allowance