ZH
RU
ES

vulcanized rubber or thermoplastic rubber

vulcanized rubber or thermoplastic rubber, Total:387 items.

In the international standard classification, vulcanized rubber or thermoplastic rubber involves: Rubber, Analytical chemistry, Products of the textile industry, Raw materials for rubber and plastics, Plastics, Rubber and plastics products.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, vulcanized rubber or thermoplastic rubber

GB/T 3511-2018 Rubber, vulcanized or thermoplastic—Resistance to weathering
GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
GB/T 35804-2018 Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, vulcanized rubber or thermoplastic rubber

GB/T 3511-2008 Rubber,vulcanized or thermoplastic .Resistance to weathering
GB/T 533-2008 Rubber,vulcanized or thermoplastic.Determination of density
GB/T 7755-2003 Rubber,vulcanized or thermoplastic--Determination of permeability to gases
GB/T 25262-2010 Rubber,vulcanized or thermoplastic.Abrasion testing.Guidance
GB/T 6031-1998 Rubber, Vulcanized or thermoplastic--Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 1690-2006 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids
GB/T 23651-2009 Rubber,vulcanized or thermoplastic.Hardness testing.Introduction and guide
GB/T 532-1997 Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric
GB/T 532-2008 Rubber,vulcanized or thermoplastic.Determination of adhesion to textile fabric
GB/T 15256-2014 Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness(multiple test piece method)
GB/T 528-1998 Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties
GB/T 6036-2001 Rubber,vulcanized or thermoplastic--Determination of low temperature stiffening(Gehman test)
GB/T 7757-1993 Rubber,vulcanized or thermoplastic.Determination of compression stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
GB/T 7757-2009 Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 7757-2009 Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 7757-2009"> Rubber,vulcanized or thermoplastic—Determiantion of compression stress-strain properties
GB/T 7762-2014 Rubber, vulcanized or thermoplastic.Resistance to ozone cracking.Static strain testing
GB/T 13642-2015 Rubber, vulcanized or thermoplastic.Resistance to ozone cracking.Dynamic strain testing
GB/T 7762-2003 Rubber,vulcanized or thermoplastic--Resistance to ozone cracking--Static strain test
GB/T 3512-2014 Rubber, vulcanized or thermoplastic.Accelerated ageing and heat resistance tests.Air-oven method
GB/T 3512-2001 Rubber,vulcanized or thermoplastic--Accelerated ageing and heat resistance tests-Air-oven method
GB/T 3511-2001 Rubber,vulcanized and thermoplastic the test method of resistance to direct natural weathering
GB/T 9870.1-2006 Rubber, vulcanized or thermoplastic.Determination of dynamic properties.Part 1:General guidance
GB/T 11210-2014 Rubber, vulcanized or thermoplastic-Antistatic and conductive products.Determination of electrical resistance
GB/T 13643-1992 Rubber,vuicanized or thermoplastic--Determination of compression stress relaxation(rings)
GB/T 11211-2009 Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method
GB/T 5723-1993 Rubber，vulcanized or thermoplastic.Determination of dimensions of test pieces and products for testpurposes.
GB/T 19243-2003 Rubber,vulcanized or thermoplastic--Methods of test for staining in contact with organic material
GB/T 11211-2009"> Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method
GB/T 11211-2009 Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method
GB 5723-1993 Determination of dimensions of test specimens and articles for vulcanized rubber or thermoplastic rubber
GB/T 9871-2008 Rubber,vulcanized or thermoplastic.Determination of aging characteristics by measurement of stress relaxation
GB/T 2439-2001 Conducting and dissipative rubbers,vulcanized or thermoplastic--Measurement of resistivity
GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device
GB/T 9870.2-2008 Rubber, vulcanized or thermophstic.Determination of dynamic properties.Part 2: Torsion pendulum methods at low frequencies
GB/T 9865.1-1996 Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part 1: Physical tests
GB/T 12829-2006 Rubber, vulcanized or thermoplastic. Determination of tear strength of small test pieces (Delft test pieces)
GB/T 1685-2008 Rubber,vulcanized or thermoplastic.Determination of stress relaxation in compression at ambient and at elevated temperatures
GB/T 7760-2003 Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method
GB/T 14834-2009 Rubber,vulcanized or thermoplastic.Determination of tendency to adhere to and corrode metals
GB/T 13934-2006 Rubber vulcanized or thermoplastic Determination of flex cracking and crack growth (De mattia)
GB/T 529-1999 Rubber, vulcanized or thermoplastic--Determination of tear strength (Trouser, angle and crescent test pieces)
GB/T 529-2008 Rubber,vulcanized or thermoplastic.Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 42122-2022 Rubber,vulcanized or thermoplastic—Determination of abrasion resistance（the method of Improved Lambourn test machine）
GB/T 7759.2-2014 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 2:At low temperatures
GB/T 20028-2005 Rubber,vulcanized or thermoplastic.Estimation of life-time and maximum temperature of use from an Arrhenius plot
GB/T 12830-2008 Rubber, vulcanized or thermoplastic.Determination of shear modulus and adhesion to rigid plates.Quadruple shear methods
GB/T 531.2-2009 Rubber,vulcanized or thermoplastic.Determination of indentation hardness.Part 2:IRHD pocket meter method
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic.Determination of indentation hardness.Part 1:Duromerer method( Shore hardness)
GB/T 7759.1-2015 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 1:At ambient or elevated temperatures
GB/T 39693.7-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method
GB/T 12585-2001 Rubber,vulcanized or thermoplastic-Rubber sheet and rubber-coated fabric-Determination rate of volatile liquids(gravimetic technique)
GB/T 39693.8-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 8:Apparent hardness of rubber-covered rollers by Pusey and Jones method
GB/T 42279-2022 Rubber,vulcanized or thermoplastic—Determination of tension set under constant elongation,and of tension set,elongation and creep under constant tensile load

Taiwan Provincial Standard of the People's Republic of China, vulcanized rubber or thermoplastic rubber

CNS 5341-2007 Determination of density for vulcanized or thermoplastic rubber
CNS 3564-2007 Low temperature testing methods for rubber, vulcanized or thermoplastic
CNS 3562-2007 Determination of the effect of liquids for rubber, vulcanized or thermoplastic
CNS 3561-2007 Methods of test for rebound resilience of rubber, vulcanized or thermoplastic
CNS 10020-2007 Methods of test for stress relaxation of rubber, vulcanized or thermoplastic
CNS 10017-2007 Methods of test for flex cracking and crack growth of rubber,vulcanized or thermoplastic (De Mattia)
CNS 3559-2007 Methods of test for tear strength of rubber, vulcanized or thermoplastic
CNS 3560-2007 Method of test for compression set of vulcanized or thermoplastic rubber at ambient, elevated or low temperatures
CNS 3554-2007 Method of test for tension set of rubber, vulcanized or thermoplastic
CNS 10018-2008 Resistance to ozone cracking of rubber,vulcanized or thermoplatic (Methods of test for static and dynamic strain)

International Organization for Standardization (ISO), vulcanized rubber or thermoplastic rubber

ISO 2781:2008 Rubber, vulcanized or thermoplastic - Determination of density
ISO 2781:2007 Rubber,vulcanized or thermoplastic--Determination of density
ISO 2781:2018 Rubber, vulcanized or thermoplastic - Determination of density
ISO 1817:2022 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
ISO 2951:2012 Rubber, vulcanized or thermoplastic - Determination of insulation resistance
ISO/DIS 1817:1971 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
ISO/FDIS 1817:2023 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
ISO 1817:2011 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 1817:2015 "Rubber, vulcanized or thermoplastic - Determination of the effect of liquids"
ISO 188:2007 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 814:2007 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method
ISO 814:2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method
ISO 36:2005 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
ISO 36:2017 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
ISO 36:2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
ISO 6056:1987 Rubber, vulcanized or thermoplastic — Determination of compression stress relaxation (rings)
ISO 7743:2008 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO/DIS 37:2023 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 14309:2011 Rubber, vulcanized or thermoplastic - Determination of volume and/or surface resistivity
ISO 11346:2023 Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use
ISO/DIS 4649:1981 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
ISO 2782-1:2022 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
ISO 12493:2023 Rubber, vulcanized or thermoplastic — Determination of stress in tension under non-isothermal conditions
ISO 23337:2007 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine
ISO 23337:2016 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine
ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
ISO 48-1:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1: Introduction and guidance
ISO 6914:2013 Rubber, vulcanized or thermoplastic.Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 6914:2021 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 4664-1:2022 Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance
ISO 34-2:2007 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 34-2:2022 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces
ISO 4649:2002 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO/DIS 23337:2023 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
ISO/FDIS 23337:2023 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
ISO 815-2:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures
ISO 3384-1:2019 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature
ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO/DIS 3384-1:2023 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature
ISO 7619-2:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
ISO 1431-1:2022 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
ISO 815-1:2019 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
ISO 48:2007 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO/DIS 1431-1:1982 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
ISO 7619-1:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 3384-2:2019 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling
ISO 4649:2010 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 1827:2022 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
ISO 4649:2017 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 3384-1:2011 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature
ISO 1827:2007 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
ISO 34-1:2022 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
ISO/DIS 813-2:1972 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer
ISO/FDIS 813-2:2023 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer
ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
ISO 7619-1:2004/Amd 1:2008 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness); Amendment 1: Precision data
ISO 2285:2019 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 3384-1:2011/Amd 1:2013 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature - Amendment 1: Revised calibration schedule

Association Francaise de Normalisation, vulcanized rubber or thermoplastic rubber

NF T46-030:2008 Rubber, vulcanized or thermoplastic - Determination of density.
NF T46-030*NF ISO 2781:2018 Rubber, vulcanized or thermoplastic - Determination of density
NF T46-036*NF ISO 4662:2017 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
NF T43-020*NF ISO 23794:2015 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
NF ISO 23794:2023 Caoutchouc, vulcanisé ou thermoplastique - Essais d'abrasion - Lignes directrices
NF T46-018*NF ISO 812:2017 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
NF T46-013*NF ISO 1817:2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
NF T46-025*NF ISO 1432:2021 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
NF T46-059:2012 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method.
NF T46-062*NF ISO 7743:2018 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
NF T46-002*NF ISO 37:2018 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
NF T46-059*NF ISO 814:2017 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method
NF ISO 6505:2021 Caoutchouc, vulcanisé ou thermoplastique - Détermination de la tendance à adhérer aux métaux et à les corroder
NF T46-034-2:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 2 : equal-pressure method.
NF T46-034-1:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1 : differential-pressure methods.
NF T46-034-2*NF ISO 2782-2:2018 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 2 : equal-pressure method
NF T46-034-1*NF ISO 2782-1:2022 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1 : differential-pressure methods
NF ISO 23233:2016 Caoutchouc, vulcanisé ou thermoplastique - Détermination de la résistance à l'abrasion au moyen d'un disque abrasif vertical, motorisé
NF ISO 2782-2:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la perméabilité aux gaz - Partie 2 : méthode équi-pression
NF T46-030/A1:2010 Rubber, vulcanized or thermoplastic - Determination of density - Amendment 1 : precision data.
NF T47-132*NF ISO 2878:2017 Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance
NF T46-083:2007 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine.
NF T46-083*NF ISO 23337:2017 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine
NF T46-087*NF ISO 23233:2016 Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc
NF T46-012*NF ISO 4649:2018 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
NF T46-003-1*NF ISO 48-1:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1 : introduction and guidance
NF T46-011-2*NF ISO 815-2:2020 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2 : at low temperatures
NF T46-015*NF ISO 132:2017 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
NF ISO 48-1:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 1 : introduction et lignes directrices
NF T46-003:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD).
NF T46-058:2010 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 o peel method.
NF T46-058*NF ISO 813:2019 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90o peel method
NF T46-033-2:2011 Rubber, vulcanized or thermoplastic - Determination of tear strenght - Part 2 : small (Delft) test pieces.
NF T46-033-2*NF ISO 34-2:2015 Rubber, vulcanized or thermoplastic - Determination of tear strenght - Part 2 : small (Delft) test pieces
NF T46-087:2009 Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc.
NF ISO 23233/A1:2017 Caoutchouc, vulcanisé ou thermoplastique - Détermination de la résistance à l'abrasion au moyen d'un disque abrasif vertical, motorisé - Amendement 1
NF T46-011-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2 : at low temperatures.
NF T46-011-2:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2 : at low temperatures
NF ISO 3865:2020 Caoutchouc vulcanisé ou thermoplastique - Méthodes d'essai pour déterminer le tachage lors du contact avec des matières organiques
NF T46-087/A1*NF ISO 23233/A1:2017 Rubber, vulcanized or thermoplastic - Determination of resistance to abrasion using a driven, vertical abrasive disc - Amendment 1
NF T46-003-9*NF ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9 : calibration and verification of hardness testers
NF T46-026-3*NF ISO 4664-3:2021 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3 : glass transition temperature (Tg)
NF ISO 4664-3:2021 Caoutchouc vulcanisé ou thermoplastique - Détermination des propriétés dynamiques - Partie 3 : température de transition vitreuse (Tg)
NF T46-052-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1 : durometer method (Shore hardness).
NF T46-003-2*NF ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2 : hardness between 10 IRHD and 100 IRHD
NF T46-011-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures.
NF T46-011-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures
NF T46-011-1*NF ISO 815-1:2020 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures
NF T46-012:2010 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device.
NF T46-020*NF ISO 1827:2016 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
NF T46-003-5*NF ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5 : indentation hardness by IRHD pocket meter method
NF ISO 48-4:2018 Caoutchouc vulcanisé ou thermoplastique - Détermination de la dureté - Partie 4 : dureté par pénétration par la méthode au duromètre (dureté Shore)
NF G37-160*NF EN ISO 6179:2018 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF T46-033-1*NF ISO 34-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1 : trouser, angle and crescent test pieces
NF T46-033-1:2010 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1 : trouser, angle and crescent test pieces.
NF T46-052-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2 : IRHD pocket meter method.
NF T46-003-6*NF ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6 : apparent hardness of rubber-covered rollers by IRHD method
NF T46-003-3*NF ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3 : dead-load hardness using the very low rubber hardness (VLRH) scale
NF T46-003-8*NF ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8 : apparent hardness of rubber-covered rollers by Pusey and Jones method
NF T46-003-7*NF ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7 : apparent hardness of rubber-covered rollers by Shore-type durometer method
NF T46-043-1/A1:2013 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: testing at constant temperature - Amendment 1 : revised calibration schedule
NF T46-019-3*NF ISO 1431-3:2017 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3 : reference and alternative methods for determining the ozone concentration in laboratory test chambers
NF T43-100*NF ISO 20163:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
NF T46-009*NF ISO 2285:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

British Standards Institution (BSI), vulcanized rubber or thermoplastic rubber

BS ISO 2781:2008+A1:2010 Rubber, vulcanized or thermoplastic - Determination of density
BS ISO 2782-1:2016 Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Differential-pressure methods
BS ISO 2782-1:2012 Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Differential-pressure methods
BS ISO 18517:2008 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
BS ISO 18517:2015 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS ISO 188:2011 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 814:2011 Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
BS ISO 34-2:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
BS ISO 34-2:2011 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
BS ISO 813:2016 Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90 peel method
BS ISO 813:2010 Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90°C peel method
BS ISO 815-2:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 815-2:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At low temperatures
BS ISO 48:2010 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 7619-2:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
BS ISO 1431-1:2012 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
BS ISO 1431-1+A1:2004 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS ISO 4664-3:2021 Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Glass transition temperature (Tg)
BS ISO 3384-2:2019 Rubber, vulcanized or thermoplastic — Determination ofstress relaxation in compression Part 2 : Testing with temperature cycling
BS ISO 4649:2010 Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
BS ISO 1827:2016 Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 1827:2011 Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods

RU-GOST R, vulcanized rubber or thermoplastic rubber

GOST ISO 2781-2013 Rubber, vulcanized or thermoplastic. Determination of density
GOST ISO 188-2013 Vulcanized rubberand thermoplastics. Accelerated ageing and heat resistance tests
GOST ISO 37-2013 Rubber or thermoplastic. Determination of tensile stress-strain properties
GOST ISO 36-2013 Rubber or thermoplastic. Determination of adhesion to textile fabrics
GOST ISO 814-2013 Rubber vulcanized or thermoplastic. Determination of adhesion to metal by two-plate method

KR-KS, vulcanized rubber or thermoplastic rubber

KS M ISO 2782-2009 Rubber, vulcanized or thermoplastic－ Determination of permeability to gases
KS M ISO 23794-2017 Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS M 6781-2022 General rules of physical testing methods for vulcanized rubber or thermoplastic rubber
KS M ISO 7743-2022 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
KS M ISO 7743-2016 Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M ISO 4649-2021 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
KS M ISO 11346-2017 Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
KS M ISO 4664-1-2017 Rubber, vulcanized or thermoplastic－Determination of dynamic properties－Part 1：General guidance
KS M ISO 4648-2007 Rubber, vulcanized or thermoplastic－Determination of dimensions of test pieces and products for test purposes
KS M ISO 132-2018 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth(De Mattia)
KS M ISO 27588-2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 1431-2-2004 Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Part 2：Dynamic strain test
KS M ISO 813-2019 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90° peel method
KS M ISO 815-2-2021 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
KS M ISO 7619-2-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 815-1-2021 Rubber, vulcanized or thermoplastic —Determination of compression set —Part 1: At ambient or elevated temperatures
KS M ISO 7619-1-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)

Indonesia Standards, vulcanized rubber or thermoplastic rubber

SNI 06-4889-1998 Determination of fixed compression of vulcanized rubber or thermoplastic rubber
SNI ISO 1817:2012 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
SNI ISO 188:2012 Rubber, vulcanized or thermoplastic – Accelerated ageing and heat resistance tests
SNI ISO 18517:2012 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
SNI ISO 48:2012 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SNI ISO 815-2:2014 Rubber, vulcanized or thermoplastic – Determination of compression set – Part 2: At low temperatures
SNI ISO 1431-1:2012 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing

AENOR, vulcanized rubber or thermoplastic rubber

UNE-ISO 4662:2013 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
UNE-ISO 812:2012 Rubber, vulcanized or thermoplastic --Determination of low-temperature brittleness
UNE-ISO 1432:2013 Rubber, vulcanized or thermoplastic -- Determination of low temperature stiffening (Gehman test)
UNE-ISO 4649:2013 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
UNE-ISO 2878:2013 Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance
UNE-ISO 815-2:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures
UNE-ISO 48:2008 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
UNE-ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
UNE-ISO 815-1:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures
UNE-ISO 34-1:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces
UNE-EN ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2010)

Korean Agency for Technology and Standards (KATS), vulcanized rubber or thermoplastic rubber

KS M ISO 23794-2017(2022) Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS M 6676-2008(2018) Rubber, vulcanized or thermoplastic－Determination of low temperature properties
KS M 6784-2014 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M ISO 1817:2010 Rubber, vulcanized-Determination of the effect of liquids
KS M 6791-2014 Permanent set testing methods for rubber, vulcanized or thermoplastic
KS M ISO 18517-2017(2022) Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
KS M ISO 37-2007(2017) Rubber, vulcanized or thermoplastic－Determination of tensile stress－strain properties
KS M ISO 7743-2016(2021) Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS M ISO 7743:2022 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
KS M ISO 6914-2015(2021) Rubber, vulcanized or thermoplastic－Determination of ageing characteristics by measurement of stress relaxation in tension
KS M ISO 4649-2012(2017) Rubber, vulcanized or thermoplastic－Determination of abrasion resistance using a rotating cylindrical drum device
KS M ISO 4649:2012 Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating cylindrical drum device
KS M ISO 4649:2021 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
KS M ISO 23233-2017(2022) Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc
KS M ISO 11346-2017(2022) Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use
KS M ISO 2782-2-2014(2019) Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method
KS M ISO 2878-2012(2017) Rubber, vulcanized or thermoplastic－Antistatic and conductive products－Determination of electrical resistance
KS M ISO 4648:2007 Rubber, vulcanized or thermoplastic－Determination of dimensions of test pieces and products for test purposes
KS M ISO 4648:2011 Rubber, vulcanized or thermoplastic-Determination of dimensions of test pieces and products for test purposes
KS M 6772-2014 Determination of tension set at high temperatures for vulcanized or thermoplastic rubber
KS M ISO 3865-2010(2021) Rubber, vulcanized or thermoplastic－Methods of test for staining in contact with organic material
KS M ISO 132:2018 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth(De Mattia)
KS M ISO 813-2019(2022) Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90° peel method
KS M ISO 2782-2:2014 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method
KS M ISO 4664-1-2017(2022) Rubber, vulcanized or thermoplastic－Determination of dynamic properties－Part 1：General guidance
KS M ISO 23337-2017(2022) Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the improved Lambourn test machine
KS M ISO 1431-2:2004 Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Part 2：Dynamic strain test
KS M ISO 23233:2012 Rubber, vulcanized or thermoplastic－Determination of resistance to abrasion using a driven, vertical abrasive disc
KS M ISO 4664-2:2012 Rubber, vulcanized or thermoplastic－Determination of dynamic properties－Part 2：Torsion pendulum methods at low frequencies
KS M ISO 4664-2-2012(2017) Rubber, vulcanized or thermoplastic－Determination of dynamic properties－Part 2：Torsion pendulum methods at low frequencies
KS M ISO 4664-2-2012(2022) Rubber, vulcanized or thermoplastic－Determination of dynamic properties－Part 2：Torsion pendulum methods at low frequencies
KS M ISO 23233:2017 Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc
KS M ISO 813:2019 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90° peel method
KS M ISO 4661-1:2011 Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
KS M ISO 815-2:2021 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
KS M ISO 3384-2007(2012) Rubber, vulcanized or thermoplastic－Determination of stress relaxation in compression at ambient and at elevated temperatures
KS M ISO 815-2:2015 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 2:At low temperatures
KS M ISO 4661-1-2002(2007) Rubber, vulcanized or thermoplastic－Preparation of samples and test pieces－Part 1：Physical tests
KS M ISO 815-2:2010 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 2:At low temperatures
KS M ISO 3384-1:2014 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature
KS M ISO 7619-2-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 815-1:2021 Rubber, vulcanized or thermoplastic —Determination of compression set —Part 1: At ambient or elevated temperatures
KS M ISO 48:2008 Rubber, vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
KS M ISO 3384-2:2014 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling
KS M ISO 3384-2-2014(2019) Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling
KS M ISO 7619-1-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 2285-2014(2019) Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

German Institute for Standardization, vulcanized rubber or thermoplastic rubber

DIN ISO 812:2021-06 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2017)
DIN ISO 812:2021 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2017)
DIN ISO 812:2020 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2017); Text in German and English
DIN ISO 1817:2016 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015)
DIN ISO 813:2020-12 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method (ISO 813:2019)
DIN ISO 4649:2020 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2017); Text in German and English
DIN ISO 3384:2008 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO 3384:2005);English version of DIN ISO 3384:2008-07
DIN ISO 132:2008 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) (ISO 132:2005);English version of DIN ISO 132:2008-07
DIN ISO 813:2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method (ISO 813:2010)
DIN ISO 48:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)
DIN ISO 132:2015 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) (ISO 132:2011)
DIN ISO 7619-2:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method (ISO 7619-2:2010)
DIN ISO 34-1:2004 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2004)
DIN ISO 34-1 Berichtigung 1:2005 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2004), Corrigenda to DIN ISO 34-1:2004-07
DIN ISO 4649:2014 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010)
DIN ISO 7619-1:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
DIN ISO 48-9:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN ISO 34-1:2016 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2015)
DIN ISO 48-3:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN ISO 3384-1:2015 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013)
DIN ISO 48-8:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN ISO 1431-3:2021 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017)
DIN ISO 2285:2022-11 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2019)

Danish Standards Foundation, vulcanized rubber or thermoplastic rubber

DS/ISO 2951:2012 Rubber, vulcanized or thermoplastic - Determination of insulation resistance
DS/EN ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)

Japanese Industrial Standards Committee (JISC), vulcanized rubber or thermoplastic rubber

JIS K 6266:2007 Rubber, vulcanized or thermoplastic -- Determination of resistance to weathering
JIS K 6252:2007 Rubber, vulcanized or thermoplastic -- Determination of tear strength
JIS K 6251:2017 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
JIS K 6271:2008 Rubber, vulcanized or thermoplastic -- Determination of volume and surface resistivity
JIS K 6253-1:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 1: General guidance
JIS K 6253-3:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-4:2012 Rubber, vulcanized or thermoplastic.Determination of hardness.Part 4: IRHD pocket meter method
JIS K 6253-3:2023 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6275-1:2022 Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods
JIS K 6271-1:2022 Rubber, vulcanized or thermoplastic -- Determination of resistivity -- Part 1: Guarded-electrode system
JIS K 6253-5:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 5: Calibration and verification of hardness testers
JIS K 6260:2017 Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia Type)
JIS K 6253-2:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD)

国家市场监督管理总局、中国国家标准化管理委员会, vulcanized rubber or thermoplastic rubber

GB/T 39692-2020 Rubber,vulcanized or thermoplastic—Low temperature testing—General introduction and guide
GB/T 6036-2020 Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test)
GB/T 40719-2021 Rubber,vulcanized or thermoplastic—Determination of volume and/or surface resistivity
GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece
GB/T 7755.1-2018 Rubber,vulcanized or thermoplastic—Determination of permeability to gases—Part 1:Differential-pressure methods
GB/T 7755.2-2019 Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods
GB/T 40797-2021 Rubber, vulcanized or thermoplastic—Determination of resistance to abrasion—Driven,vertical abrasive disc method
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers
GB/T 39693.6-2020 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method
GB/T 1685.2-2019 Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling
GB/T 12585-2020 Rubber, vulcanized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique)
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale

IT-UNI, vulcanized rubber or thermoplastic rubber

UNI ISO 1432:2021 Rubber, vulcanized or thermoplastic -- Determination of low-temperature stiffening (Gehman test)
UNI ISO 6914:2021 Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension

VN-TCVN, vulcanized rubber or thermoplastic rubber

TCVN 4509-2006 Rubber, vulcanized or thermoplastic.Determination of tensile stress-strain properties
TCVN 5320-2-2016 Rubber,vulcanized or thermoplastic - Determination of compression set .Part 2: At low temperatures
TCVN 5320-1-2016 Rubber,vulcanized or thermoplastic - Determination of compression set .Part 1:At ambient or elevated temperatures

TH-TISI, vulcanized rubber or thermoplastic rubber

TIS 1847-1999 Rubber vulcanized or thermoplastic.determination of tensile stress.strain properties

ZA-SANS, vulcanized rubber or thermoplastic rubber

SANS 7743:2003 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
SANS 10048:2009 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 11431-1:2003 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking Part 1: Static strain test
SANS 10034-2:2009 Rubber, vulcanized or thermoplastic - Determination of tear strength Part 2: Small (Delft) test pieces
SANS 10815-2:2009 Rubber, vulcanized or thermoplastic - Determination of compression set Part 2: At low temperatures
SANS 1132:2009 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
SANS 7619-1:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness)
SANS 11346:2003 Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot
SANS 10815-1:2009 Rubber, vulcanized or thermoplastic - Determination of compression set Part 1: At ambient or elevated temperatures
SANS 7619-2:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 2: IRHD pocket meter method
SANS 10034-1:2009 Rubber, vulcanized or thermoplastic - Determination of tear strength Part 1: Trouser, angle and crescent test pieces

GOSTR, vulcanized rubber or thermoplastic rubber

GOST ISO 37-2020 Rubber and thermoelastoplasts. Determination of tensile stress-strain properties

Lithuanian Standards Office , vulcanized rubber or thermoplastic rubber

LST ISO 1817:2012 Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids (ISO 1817:2011, identical)
LST EN ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2010)
LST ISO 34-1:2011 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2010, identical)

ES-UNE, vulcanized rubber or thermoplastic rubber

UNE-ISO 3865:2016 Rubber vulcanized or thermoplastic. Methods of test for staining in contact with organic material

CZ-CSN, vulcanized rubber or thermoplastic rubber

CSN ISO 815:1994 Rubber,vulcanized or thermoplastic;determination of compression set at ambient,elevated or low temperatures

SE-SIS, vulcanized rubber or thermoplastic rubber

SIS SS-ISO 1827:1992 Rubber, vulcanized or thermoplastic — Determination of modulus in shear or adhesion to rigid plates — Quadruple shear method

BE-NBN, vulcanized rubber or thermoplastic rubber

NBN-ISO 1827:1994 Rubber, vulcanized or thermoplastic. Determination of modulus in shear or adhesion to rigid plates. Quadruple shear method