ZH
RU
ES

Environmental protection tooling

Environmental protection tooling, Total:497 items.

In the international standard classification, Environmental protection tooling involves: Environmental protection, Company organization and management, Products of the chemical industry, Soil quality. Pedology, Structures of buildings, Freight distribution of goods, Rubber and plastics products, Sacks. Bags, Ground service and maintenance equipment, Packaging materials and accessories, Continuous handling equipment, Wastes, Passenger and cabin equipment, Furniture, Vocabularies, Hydraulic construction, Power stations in general, Construction materials, Hydraulic energy engineering, Textile fibres, Construction of waterways and ports, Manufacturing processes in the rubber and plastics industries, Fluid power systems, Electrical equipment for working in special conditions, Domestic, commercial and industrial heating appliances, Ergonomics, Clothes, Protection of and in buildings, Construction technology, Seals, glands, Special purpose vehicles, Industrial automation systems, Interior finishing, Production in the chemical industry, Extraction and processing of petroleum and natural gas, Space systems and operations, Insulating materials, Sterilization and disinfection, Technical drawings, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Air quality, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Metrology and measurement in general, Paper and board, Construction industry, Aerospace fluid systems and components, Terminology (principles and coordination), PAPER TECHNOLOGY, Protective equipment, Civil engineering in general, Road engineering, Welding, brazing and soldering, Materials for aerospace construction, External structures, Agricultural machines, implements and equipment, Packaging and distribution of goods in general, Buildings, Farming and forestry, ELECTRICAL ENGINEERING, Physical planning. Town planning, Burners. Boilers, Internal combustion engines for road vehicles, Quality, Construction equipment, Radiation protection, Applications of information technology, Energy and heat transfer engineering in general, Petroleum, petroleum products and natural gas handling equipment, Power transmission and distribution networks, Protection against fire, Paints and varnishes, Materials and components for railway engineering, Protection against crime, Road vehicles in general, Shipbuilding and marine structures in general, Electrical accessories, Insulation, Railway engineering in general, Electronic display devices, Machine tool systems, Transport, Occupational safety. Industrial hygiene, Industrial furnaces, Telecommunication terminal equipment, Telecommunications in general, Environmental testing, Lifting equipment, Surface treatment and coating, Corrosion of metals, Heat pumps, Refrigerating technology, Pipeline components and pipelines, TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING, Electrical and electronic testing, Semiconductor devices, Quantities and units, Road vehicle systems, Electrical engineering in general, Components for electrical equipment, Measurement of force, weight and pressure.

Group Standards of the People's Republic of China, Environmental protection tooling

T/ZPP 018-2022 System design requirements for marine engineering environmental protection technology equipment
T/ZZB 0534-2018 Environment-friendly art candle
T/HBSL 01-2023 Environmental Protection Guidelines for Soil and Water Conservation Engineering Construction
T/ZZB 1433-2019 Environment-friendly aromatic container candle
T/FSNZ 6-2019 Construction technical specification for prefabricated steel structure aluminum honeycomb environmental protection room
T/ZAQ 10111-2022 Environmental friendly flexible assembled sidestone
T/SHDSGY 047-2023 Production process specification for environmental protection furniture
T/CWEA E3-2017 Specification for environmental protection supervision on construction for water projects
T/QGCML 1920-2023
T/FSNZ 5-2019 Prefabricated steel structure aluminum honeycomb environmental protection room
T/QGCML 1666-2023 Prefabricated environmentally friendly L-shaped hollow prefabricated parts
T/SCMES 7-2020 Enviroment friendly foaming agent for shield tunneling
T/AHEMA 3-2020 Service specification of environmental housekeeper in Industrial Park
T/QGCML 948-2023 Technical specifications for environmental protection industrial waste gas treatment
T/SHMHZQ 027-2022 Building environmental protection and energy saving decoration materials production design requirements
T/CZACA 4-2017 Environmental protection guide of Songhua Stone processing enterprises
T/STACAES 008-2021 Sanitation cleaning vehicle Road separation facilities cleanout vehicle
T/CIPR 076-2023 Fully automatic production device for edible and environmentally friendly tableware
T/CBDA 53-2021 Standards for repair and maintenance of building decoration engineering
T/SXAEPI 1-2021 Guidelines for Environmental Protection Compliance Management of Industrial Enterprises
T/CASME 539-2023 Environmentally friendly and highly flame-retardant electrical insulation conduits for building
T/SXAEPI 5-2022 Guidelines for Environmental Protection Compliance Management of iron and steel Industrial Enterprises
T/SXAEPI 7-2022 Guidelines for Environmental Protection Compliance Management of Industrial Enterprises Cement Industry
T/SXAEPI 18-2023 Guidelines for environmental protection compliance management of industrial enterprises—Metal foundry industry
T/SDHCIA 006-2020 Environmental Protection Product Technical Requirements Flue Gas Denitrification Devices
T/QGCML 1761-2023 New PAF antibacterial and odor-free environmentally friendly wall decoration fabric
T/GZWEA A07-2023 Guidelines for environment protection design of water conservancy projects during construction in Guizhou province
T/CECS 983-2021 Technical specification for light-duty thermal insulation decorative board external wall external thermal insulation engineering
T/CECS 1081-2022 Quality Appraisal Standard for Exterior Wall Exterior Insulation Engineering of Insulation Decorative Board
T/CDCMX 001-2023 Technical requirements for environmental protection of service places for motor vehicle washing and maintenance
T/HNSNWF 001-2022 Qualification evaluation and service specification of green environmental protection decoration en
T/SXAEPI 4-2022 Guidelines for Environmental Protection Compliance Management of Industrial Enterprises Coking Chemical Industry
T/SHMHZQ 048-2022 Technical Standard for open transportation platform
T/SXAEPI 6-2022 Guidelines for Environmental Protection Compliance Management of Industrial Enterprises Thermal power industry
T/DXJSXH 0001-2021 PROTECTION STANDARDS FOR ENGINEERING CONSTRUCTION ENVIRONMENT IN DAXING DISTRICT, BEIJING
T/SXAEPI 11-2022 Guidelines for Environmental Protection Compliance Diagnostic Service of Industrial Enterprises
T/CECS 10289-2023 Industrial solid waste light insulation and decoration integrated board
T/CECS 475-2017 Technical specification for external thermal insulation engineering of stone veneer decorative board
T/CSES 106-2023 Technical Specifications for Acceptance of Environmental Protection Facilities for Completed Construction Projects——Ceramics Industry
T/CECS 525-2018 Technical Specification for external insulation works of exterior wall with Thermal Decorative Metal Panels
T/QGCML 600-2022 General technical requirements for energy-saving and environment-friendly air pollution control devices
T/CIPR 121-2023 Technical requirements for environmentally friendly and efficient pig breeding manure treatment devices
T/SXAEPI 17-2023 Guidelines for environmental protection compliance management of industrial enterprises—Iron ore mining
T/QGCML 1770-2023 Environmental Protection Compliance Management Guide for Agricultural Machinery Processing Enterprises
T/CSES 90-2023 Technical Specifications for Acceptance of Environmental Protection Facilities for Completed Construction Projects——Alumina Industry
T/DZJN 146-2023 Environmental protection equipment maintenance, installation and operation enterprise capacity evaluation specification
T/CSES 105-2023 Technical Specifications for Acceptance of Environmental Protection Facilities for Completed Construction Projects ——Coking Chemical Industry
T/ZSA 108-2022 AI model protection requirement based on Trusted Execution Environment
T/CSEE 0238-2021 Environmental technical specifications for construction of overhead transmission lines in high altitude areas
T/CECS 1265-2023 Technical specification for indoor environmental pollution control of prefabricated interior decoration engineering
T/HNSNWF 004-2022 Green environmental protection fully decorated finished house enterprise qualification certificati
T/CECRPA 003-2022 Technical Guidance for Ecological Environment Protection of Urban Rail Transit Construction Projects
T/HAS 107-2021 Technical specification for the construction of environmentally friendly and odor-free waste tire rubber powder modified asphalt pavement
T/GSIA 002-2023 Specification for Industrial Internet power equipment identification data security protection
T/CSES 65-2022 Evaluation technical specification of sintering flue gas recirculation process and equipment in iron and steel industry
T/GIEHA 001.1-2017 Engineering technical service specification for indoor environmental purification and treatment—decoration pollution treatment engineering

Professional Standard - Agriculture, Environmental protection tooling

NY/T 2093-2011 Rural Environmental Protection Workers

British Standards Institution (BSI), Environmental protection tooling

BIP 2038-2004 Environmental Due Diligence - A Guide to ISO 14015: The role of environmental assessment in environmental due diligence
BS EN 60079-18:2015+A1:2017 Explosive atmospheres - Equipment protection by encapsulation “m”
BS EN 60079-15:2010 Explosive atmospheres. Part 15: Equipment protection by type of protection "n"
BS EN 16603-34:2014 Space engineering. Environmental control and life support (ECLS)
BS 7858:2004 Security screening of individuals employed in a security environment - Code of practice
BS EN 172:1995 Specification for sunglare filters used in personal eye-protectors for industrial use
BS EN IEC 63052:2021 Power frequency overvoltage protective devices (POPs) for household and similar applications
BS EN 50550:2011+A1:2014 Power frequency overvoltage protective device for household and similar applications (POP)
BS EN 14098:2001 Space product assurance - Thermal cycling test for the screening of space materials and processes
BS IEC 61747-40-4:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Biaxial flexural strength (ring-on-ring)
BS EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP)
BS ISO 13577-3:2016 Industrial furnaces and associated processing equipment. Safety. Generation and use of protective and reactive atmosphere gases
BS EN ISO 11117:2019 Gas cylinders. Valve protection caps and guards. Design, construction and tests
BS EN 378-3:2008 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 3: Installation site and personal protection
BS EN 378-3:2016 Refrigerating systems and heat pumps. Safety and environmental requirements. Installation site and personal protection
BS EN 378-3:2008+A1:2012 Refrigerating systems and heat pumps. Safety and environmental requirements. Installation site and personal protection
BS IEC 60877:1999 Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
BS IEC 61747-40-6:2018 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Retained biaxial flexural strength (abraded ring-on-ring)
16/30339801 DC BS EN 63052. Power frequency overvoltage protective devices for household and similar applications (POP)

农业农村部, Environmental protection tooling

NY/T 3125-2017 Rural environmental protection worker

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Environmental protection tooling

GB/T 35973-2018 Environmental technical requirements for containers

SAE - SAE International, Environmental protection tooling

SAE AIR825/11-2001 Closed-Cycle Protective Breathing Devices
SAE AIR5479B-2017 Environmentally Compliant Processes for Landing Gear
SAE AMS5028B-1987 Steel Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) Vacuum Melted@ Environment-Controlled Packaging
SAE AMS5028C-1998 Steel Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) Vacuum Melted@ Environment-Controlled Packaging
SAE ARP760-1963 400-CYCLE GROUND POWER UNIT PROVISIONS FOR AIRCRAFT ELECTRICAL SYSTEM PROTECTION

Professional Standard-Packaging, Environmental protection tooling

BB/T 0021-2001 Environmentally friendly bitumen flexible packaging bag

Society of Automotive Engineers (SAE), Environmental protection tooling

SAE AIR825/11A-2023 Closed-Cycle Protective Breathing Devices
SAE AIR5479-2002 Environmentally compliant processes for landing gear
SAE AIR5479A-2013 Environmentally Compliant Processes for Landing Gear
SAE AIR5479B-2022 Environmentally Compliant Processes for Landing Gear
SAE AIR825/11A-2002 Closed-Cycle Protective Breathing Devices
SAE AMS5028D-2004 Steel, Welding Wire, 1.05Cr 0.55Ni 1.0Mo 0.07V (0.34-0.40C) Vacuum Melted, Environment-Controlled Packaging
SAE AMS6461K-2008 Steel, Welding Wire, 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130), Vacuum Melted, Environment Controlled Packaging
SAE ARP760-2002 400-CYCLE GROUND POWER UNIT PROVISIONS FOR AIRCRAFT ELECTRICAL SYSTEM PROTECTION
SAE AMS6468E-2013 Steel, Welding Wire 1.0Cr 10Ni 3.8Co 0.45Mo 0.08V (0.14-0.17C) Vacuum Melted, Environment Controlled Packaging
SAE J621-1995 Industrial Power Take-Offs with Driving Ring-Type Overcenter Clutches April 1989

US-FCR, Environmental protection tooling

FCR COE EM 1110-2-1204-1989 ENVIRONMENTAL ENGINEERING FOR COASTAL PROTECTION
FCR NAV P-90-1989 PRESERVATION, PACKAGING, PACKING OF NAVAL FACILITIES ENGINEERING COMMAND TECHNICAL MATERIAL

Korean Agency for Technology and Standards (KATS), Environmental protection tooling

KS T 1302-2008(2013) Packaging－General guideline for environmental conscious packaging and packaging materials
KS C IEC 61229:2017 Rigid protective covers for live working on a.c. installations
KS B ISO 10807-2006(2011) Pipework－Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres

RO-ASRO, Environmental protection tooling

STAS 3829-1953
STAS 9980/2-1989 Assembly tools for screws and nuts BOX RING SLUGGING WRENCH Dimcnsions
STAS 1229-1968

U.S. Military Regulations and Norms, Environmental protection tooling

ARMY MIL-DTL-3943/81 D VALID NOTICE 1-2013 Decoration, Superior Service Award, Environmental Protection Agency
ARMY MIL-DTL-3943/82 D VALID NOTICE 1-2013 Decoration, Commendable Service Award, Environment Protection Agency
ARMY MIL-DTL-3943/80 D VALID NOTICE 1-2013 Decoration, Exceptional Service Award, Environmental Protection Agency
ARMY MIL-DTL-3943/83 D VALID NOTICE 1-2013 DECORATION, DISTINGUISHED CAREER SERVICE AWARD, ENVIRONMENTAL PROTECTION AGENCY
ARMY MIL-T-13918 D VALID NOTICE 1-1987 TOOL KIT, VALVE SEAT RING INSERTER
ARMY MIL-T-13918 D-1973 TOOL KIT, VALVE SEAT RING INSERTER

Xinjiang Provincial Standard of the People's Republic of China, Environmental protection tooling

DB65/T 3711-2015 Environmentally friendly pebble coal collection device
DB65/T 4060-2017 Green environmental protection construction management specification for construction engineering

Professional Standard - Environmental Protection, Environmental protection tooling

HJ/T 386-2007 Technical requirement for environmental protection product. Adsorption gas cleaner for industrial emission
HJ/T 285-2006 Specifications of environmental protection product Wet dust collector for industrial dust
HJ/T 387-2007 Technical requirement for environmental protection product. Adsorption gas cleaner for industrial emission
HJ 466-2009 Environmental Protection Guide for Developing Circular Economy in Aluminum Industry
HJ/T 389-2007 Technical requirement for environmental protection product Catalytic gas cleaner for industrial organic emission
HJ 465-2009 Environmental Protection Guide for Developing Circular Economy in Iron and Steel Industry
HJ 930-2017 Environmental Internet of Things Standardization Work Guidelines
HJ/T 268-2006 Specifications for environmental protection product Neutralization equipment
HJ/T 271-2006 Specifications for environmental protection product Ultrafiltration equipment
HJ/T 334-2006 Specifications for environmental protection product. Electrodialysis equipment
HJ/T 243-2006 Technical requirement for environmental labeling product Oil and water separator
HJ/T 253-2006 Technical requirement for environmental labeling product Microporous filter
HJ/T 259-2006 Technical requirement for environmental labeling product Rotary brush aerator
HJ/T 280-2006 Specifications of environmental protection product Rotary disc aerator
HJ/T 282-2006 Specifications of environmental protection product Air floatation device with shallow tank
HJ 2538-2014 Technical requirement for environmental protection products Grit removal equipment in grit chamber
HJ/T 244-2006 Technical requirement for environmental labeling product Oil trap with sloping tube (plank)
HJ 2522-2012 Technical requirement for environmental protection product.Ultraviolet disinfection equipment
HJ/T 408-2007 Technical guidelines for environmental protection in paper industry project for check and accept of completed project
HJ/T 406-2007 Technical guidelines for environmental protection in ethylene project for check and accept of completed construction project
HJ 705-2014 Technical regulations for environmental protection in electric power transmission and distribution project for check and accept of completed project
HJ/T 261-2006 Technical requirement for environmental labeling product Pressure dissolved air floatation equipment
HJ/T 270-2006 Specifications for environmental protection product Reverse osmosis water treatment equipment
HJ/T 369-2007 Technical requirement for environmental protection products. Chemical feed equipment for water treatment
HJ 440-2008 Technical requirement for environmental labeling products Building decoration engineering
HJ 256-2021 Technical specification for acceptance of environmental protection facilities after completion of construction projects Cement industry
HJ 404-2021 Technical Specifications for Acceptance of Environmental Protection Facilities for Construction Project Completion Iron and Steel Industry
HJ 406-2021 Construction project completion environmental protection facilities acceptance technical specification ethylene project
HJ 408-2021 Technical specifications for acceptance of environmental protection facilities after completion of construction projects Paper industry
HJ 436-2008 Technical guidelines for environmental protection in port project for check & accept of completed construction project
HJ 790-2016 Technical guidelines for environmental protection in polyester industry project for check and accept of completed construction project
HJ 552-2010 Technical guidelines for environmental protection in highway projects for check and accept of completed construcion project
HJ 792-2016 Technical guidelines for environmental protection in pharmaceutical constructional project for check and accept of completed construction project
HJ 451-2008 Technical requirement for environmental protection product.Aftertreatment devices for diesel vehicle exhaust
HJ/T 288-2006 Specifications of environmental protection product Wet flue-gas desulphurization & precipitator device
HJ/T 388-2007 Technical requirement for environmental protection product. Wet paint-mist filtrating equipment
HJ/T 337-2006 Specifications for environmental protection product. Biological contact aeration complete of equipment
HJ/T 254-2006 Technical guidelines for environmental protection in electrolyzing aluminum capital construction project for check and accept of completed project
HJ 705-2020 Construction Project Completion Environmental Protection Acceptance Technical Specification Power Transmission and Transformation
HJ/T 247-2006 Technical requirement for environmental labeling product Vertical shaft mechanical surface aerator
HJ 709-2014 Technical guidelines for environmental protection in dyeing and finishing of textile industry for check and accept of completed project
HJ/T 256-2006 Technical guidelines for environmental protection in cement production industry capital construction project for check and accept of completed project
HJ 464-2009 Technical guidelines for environmental protection in water conservancy and hydropower projects for check and accept completed project
HJ/T 405-2007 Technical guidelines for environmental protection in petroleum refinery industry project for check and accept of completed construction project
HJ/T 407-2007 Technical guidelines for environmental protection in automobile manufacturing capital construction project for check and accept of completed project
HJ/T 255-2006 Technical guidelines for environmental protection in power plant capital construction project for check and accept of completed project
HJ 1152-2020 Construction Project Completion Environmental Protection Acceptance Technical Specification Radio and Television
HJ 791-2016 Technical Specifications for Environmental Protection Acceptance of Construction Project Completion Viscose Fiber
HJ 672-2013 Technical Guidelines for Environmental Protection in Coal mining and Processing Projects for Check and Accept Complected Project
HJ/T 286-2006 Specifications of environmental protection product Multiple cyclones of industrial boilers
HJ/T 394-2007 Technical guidelines for environmental protection in ecological constmction projects for check & accept completed project
HJ/T 404-2007 Technical guidelines for environmental protection in black metal smelting and expansion for check and accept of completed construction project
HJ/T 403-2007 Technical guidelines for environmental protection in urban rail transit for check and accept of completed constmction project
HJ 405-2021 Construction Project Completion Environmental Protection Facilities Acceptance Technical Specification Petroleum Refining
HJ 794-2016 Technical guidelines for environmental protection in medical organization for check and accept of completed project
HJ 254-2021 Technical specifications for acceptance of environmental protection facilities after completion of construction projects Electrolytic aluminum and aluminum carbon industry
HJ/T 319-2006 Specifications for environmental protection product.Granite wet flue-gas desulphurization & precipitator device
HJ 612-2011 Technical guidelines for environmental protection in oil & natural gas exploitation development for check and accept completed project
HJ 407-2021 Technical specifications for acceptance of environmental protection facilities after completion of construction projects Automobile manufacturing industry
HJ/T 390-2007 Technical requirement for environmental protection product Control system of fuel evaporative pollutants from vehicle with petrol engine

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Environmental protection tooling

GB/T 51373-2019 Design Standards for Environmental Protection Engineering of Ordnance Industry
GB 50894-2013 Code for design of environment protection for machinery industry
GB 50559-2010 Code for design of environmental protection of glass plant
GB 50469-2008 Code for design of environmental protection of rubber factory
GB 50406-2007 Code for design of environmental protection of iron and steel industry
GB 50821-2012 Code for design of environmental protection in coal industry
GB 50814-2013 Code for design of environmental protection of electronic engineering
GB 50558-2010 Code for design of environmental protection of cement plant
GB 50469-2016 Design code for environmental protection of rubber factories
GB 50406-2017 Design code for environmental protection of iron and steel industry
GB 50988-2014 Code for design of environment protection engineering of nonferrous metals industry
GB/T 50483-2019 Environmental Protection Engineering Design Standards for Chemical Construction Projects
GB/T 50887-2013 Code for environmental protection design of wood-based panel engineering
GB 50425-2008 Code for design of environmental protection of textile industry enterprise
GB 50483-2009 Code for design of environmental protection of chemical industry projects
GB/T 50558-2019 Design standards for environmental protection facilities in cement factories
GB/T 51391-2019 Technical standards for environmental protection in communication engineering construction
GB/T 50559-2018 Design standard for environmental protection facilities of flat glass factories
GB 50257-2014 Code for construction and acceptance of electric equipment on fire and explosion hazard electrical equipment installation engineering
GB 50257-1996 Code for construction and acceptance of electric device for explosion atmospheres and fire hazard electrical equipment installation engineering
GB/T 26336-2010 Industrial communication networks.Installation of communication networks in industrial premises
GB/T 51374-2019 Construction and acceptance standards for electrical installation engineering in explosive environment
GB 50257-1996(条文说明) Code for construction and acceptance of electric device for explosion atmospheres and fire hazard electrical equipment installation engineering (explanation)
GBJ 64-1983 Specifications for the design of surge protection of industrial and civil electric system (Trial)
GB/T 20217-2006 Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service

North Atlantic Treaty Organization Standards Agency, Environmental protection tooling

STANAG 7102-2009 ENVIRONMENTAL PROTECTION HANDLING REQUIREMENTS FOR PETROLEUM HANDLING FACILITIES AND EQUIPMENT

Military Standard of the People's Republic of China-General Armament Department, Environmental protection tooling

GJB 6117-2007 Materiel environmental engineering terms
GJB 282.1-1987 Armored Vehicle Environmental Conditions Operating Ambient Temperature
GJB 4239-2001 General requirements for materiel environmental engineering
GJB 8330-2015 General requirements for engineering support operating environment information
GJB 156-1986 Design and installation of sacrificial anode protection for port facilities
GJB 211.3-1986 Specialty industrial leather – packaging, marking, transportation and storage
GJB 156A-2021 Design and installation requirements for sacrificial anode protection of port facilities
GJB 7073-2010 Electronic safety and arming device,electromagnetic environmental and performance test methods for fuze
GJB 214.2-1986 Packaging, marking, transportation and storage of special industrial leather seals

Hunan Provincial Standard of the People's Republic of China, Environmental protection tooling

DB43/T 2766-2023 Specifications for construction and acceptance of water conservancy and environmental protection dredging projects

国家质量监督检验检疫总局, Environmental protection tooling

SN/T 4742-2017 Technical requirements for environmentally friendly cotton grading equipment

Professional Standard - Railway, Environmental protection tooling

TB 10501-2016 Code for Environmental Protection Design of Railway Engineering
TB 10501-1998 Code for environmental protection design of railway engineering
TB 10501-1998（条文说明） Code for environmental protection design of railway engineering

Professional Standard - Traffic, Environmental protection tooling

JTS 149-1-2007 Design Code of Environment Protection for Port Engieering
JTJ 231-1994 The Design Code of Environment Protection for Port Engineering
JTJ 231-1994（条文说明） Design Code for Environmental Protection of Port Engineering
JTS 149-2018 Code for Design of Environmental Protection of Port and Waterway Engineering

Professional Standard - Building Materials, Environmental protection tooling

JCJ 11-1997 Specification for environmental protection design of cement plants
JCJ 08-1995 Regulations on environmental protection design of flat glass factories

Professional Standard - Machinery, Environmental protection tooling

JBJ 16-2000 Design code for environment protection of machinery industry
JB/T 6629-2015 Circulation protection system and the auxiliary device of mechanical seal
JB/T 12816-2016 Building construction machinery and equipment.Environment-friendly concrete mixing plant (tower)
JB/T 9269-1999 Mountable environmental requirements of industrial process control computer system

Fujian Provincial Standard of the People's Republic of China, Environmental protection tooling

DB3502/T 099-2023 Industrial park environmental steward service guide

Professional Standard - Ferrous Metallurgy, Environmental protection tooling

YB 9066-1995 Regulations on Environmental Protection Design of Metallurgical Industry
YB 9067-1995 Provisions on the scope of division of environmental protection facilities in the metallurgical industry

Professional Standard - Energy, Environmental protection tooling

NB/T 10967-2022 General Rules of Environmental Protection Technology for Hydropower Projects
NB/T 35033-2014 Preparation regulation for special investment on environmental protection design of hydropower project
NB/T 35060-2015 Code for environmental protection design of hydropower projects resettlement

Professional Standard - Petrochemical Industry, Environmental protection tooling

SH/T 3024-2017 Design code for environmental protection of petrochemical industry
SH 3024-1995 Code for design of environmental protection enterprises used in petrochemical industry

German Institute for Standardization, Environmental protection tooling

DIN 69001-39:1981-10 Machine tools; Multi-spindle heads; Protection rings Type A
DIN SPEC 91424:2021 Ascertaining of working time of officers for environment protection and environmental management
DIN EN 13406:2003-02 Agricultural machinery - Slurry tankers and spreading devices - Environmental protection; Requirements and test methods for the spreading precision; German version EN 13406:2002
DIN EN 172:2002 Personal eye-protections - Sunglare filters for industrial use (includes Amendment A1:2000 and A2:2001); German version EN 172:1994 + A1:2000 + A2:2001
DIN 69001-55:1994-01 Machine tools; multi-spindle heads; mounting rings types E to H
DIN 69001-38:1981-10 Machine tools; Multi-spindle heads; Mounting rings Types A to D
DIN 14555-3:2002 Vehicles carrying tools and gears - Part 3: Emergency tender RW
DIN 4140:2023-05 Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations; Text in German and English
DIN 48065-3:1980 Ball eyes with protective fitting attachment, for connection bolts, for overhead power lines
DIN 48065-1:1980 Ball eyes without protective fitting attachment, for U-shaped straps, for overhead power lines
DIN 48065-2:1980 Ball eyes with protective fitting attachment, for U-shaped straps, for overhead power lines

国家能源局, Environmental protection tooling

NB/T 10504-2021 Design specifications for environmental protection of hydropower projects
NB/T 10229-2019 Procedures for acceptance of environmental protection facilities in hydropower projects
SY/T 10047-2019 Environmental protection design specifications for offshore oil (gas) field development projects
NB/T 10505-2021 Procedures for Preparation of Overall Design Report on Environmental Protection of Hydropower Projects

Professional Standard - Electricity, Environmental protection tooling

DL/T 5260-2010 Technical code of environmental protection for hydropower and water conservancy construction engineering
DL/T 5402-2007 Specification for environmental protection design of water conservancy and hydropower project
DL/T 972-2005 Live working-quality assurance plans applicable to tools,devices and equipment
DL/T 5161.15-2002 Specification for construction quality checkout and evaluation of electric equipment installation Part 15:Electric device of explosion atmospheres
DL/T 5161.15-2018 Specification for construction quality checkout and evaluation of electric equipment installation Part 15:Electric device of explosion atmospheres

Shaanxi Provincial Standard of the People's Republic of China, Environmental protection tooling

DB61/T 1057-2016 Technical specifications for environmental protection acceptance of semi-coke industry completion
DB61/T 1307-2019 Technical Guidelines for Environmental Protection Engineering of Catering Industry
DB61/T 333~335-2003

Professional Standard - Business, Environmental protection tooling

SB/T 10727-2012 Technical requirements for environmentally friendly building and decorating materials
SB/T 10727-2015 Technical requirements for environmentally friendly building materials and decorative materials

GB-REG, Environmental protection tooling

REG 33 CFR PART 157-2010 RULES FOR THE PROTECTION OF THE MARINE ENVIRONMENT RELATING TO TANK VESSELS CARRYING OIL IN BULK

国家邮政局, Environmental protection tooling

YZ/T 0179-2021 Agricultural product delivery services and environmentally friendly packaging requirements

International Organization for Standardization (ISO), Environmental protection tooling

ISO 10368:1992 Freight thermal containers; remote condition monitoring
ISO/TS 16976-8:2013 Respiratory protective devices - Human factors - Part 8: Ergonomic factors
ISO 9920:1995 Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
ISO 16976-8:2023 Respiratory protective devices — Human factors — Part 8: Ergonomic factors

US-VA, Environmental protection tooling

VA A-A-30189-1992 RESPIRATOR, PARTICULATE HEALTHCARE

Professional Standard - Water Conservancy, Environmental protection tooling

SL 358-2006 Guidelines of environment profection for the construction of rural hydropower station
SL 492-2011 Regulation for environment protection design of water resources and hydropower project
SL 359-2006 Cost estimate compilation code for environmental protection of water resources and hydropower projects

Shandong Provincial Standard of the People's Republic of China, Environmental protection tooling

DB37/T 3595-2019 Thermal and environmental test methods for civil stoves
DB37/T 3393-2018 Technical specifications for environmental protection acceptance of constructed wetland water purification projects
DB37/T 4382-2021 Environmentally friendly and stable rubber powder modified asphalt and mixture construction technical regulations

CEN - European Committee for Standardization, Environmental protection tooling

EN ISO 9920:2007 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble
EN ISO 9920:2003 Ergonomics of the thermal environment Estimation of the thermal insulation and evaporative resistance of a clothing ensemble

Association Francaise de Normalisation, Environmental protection tooling

NF X35-206*NF EN ISO 9920:2009 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble
NF C23-579-18/A1*NF EN 60079-18/A1:2017 Explosive atmospheres - Part 18 : Equipment protection by encapsulation "m"
NF L48-121:1948 Aircraft fluid installations. Tank equipment. Filters and retaining rings.
NF C23-579-18*NF EN 60079-18:2015 Explosive atmospheres - Part 18 : equipment protection by encapsulation "m"
NF EN 60079-18/A1:2017 Atmosphères explosives - Partie 18 : protection du matériel par encapsulage "m"
NF EN 60079-18:2015 Atmosphères explosives - Partie 18 : protection du matériel par encapsulage "m"
NF L23-253*NF EN 3426:2006 Aerospace series - Groove dimensions for axial mounting external type retaining rings
NF F19-220:1992 Railway rolling stock. Epoxy resin paints. Two-coat protection and decoration system.
NF L23-252*NF EN 3425:2006 Aerospace series - Groove dimensions for axial mounting internal type retaining rings
NF F01-510:1990 Railway rolling stock. Environnement conditions sustained or produced by devices or organs in vehicles.
NF L90-271:2002 Space product assurance - Thermal cycling test for the screening of space materials and processes.
NF C61-499/A1*NF EN 50550/A1:2014 Power frequency overvoltage protective device for household and similar applications (POP)
NF E62-333:1992 Machine tools. Modular units. Modular clamping and mounting device for piece. Position holding components.
NF Z87-019-2-4*NF EN 300019-2-4:2019 Environmental Engineering (EE) - Environmental conditions and environmental tests - for telecommunications equipment - Part 2-4: Specification of environmental tests - Stationary use at non-weatherprotected locations (V2.5.1)
NF Z87-019-1-5*NF EN 300019-1-5:2004 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-5 : classification of environmental conditions - Ground vehicle installations (V2.1.4)
NF EN 300019-1-5:2004 Télécommunications - Ingénierie de l'environnement - Conditions d'environnement et essais d'environnement pour les équipements de télécommunication - Partie 1-5 : classification des conditions d'environnement - Installations sur véhicule ter...
NF Z87-019-2-3*NF EN 300019-2-3:2021 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3 : specification of environmental tests-Stationary use at weatherprotected locations (V2.5.1)
NF EN 62570:2015 Pratiques normalisées relatives au marquage des appareils médicaux et des éléments de sureté divers dédiés aux environnements de résonance magnétique
NF Z87-019-25*NF EN 300019-2-5:2022 Environmental Engineering (EE)-Environmental conditions and environmental tests for telecommunications equipment-Part 2 : specification of environmental tests-Sub-part 5: Ground vehicle installations (V3.1.1)
NF Z87-019-15:1995 Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 1-5 : classification of environmental conditions. Ground vehicle installations.
XP S76-976-8*XP ISO/TS 16976-8:2013 Respiratory protective devices - Human factors - Part 8 : ergonomic factors

YU-JUS, Environmental protection tooling

JUS N.S8.611-1991 Electrical apparatus for potentially explosive atmospheres. Artificial ventilation for the protection of analyser(s) houses
JUS N.B4.904-1993 Lightning protection - Steel installation elements coated with Zn- Ringholder for air termination
JUS M.K3.060-1989 Building hardvvare. Shield for door lock. Dimensions
JUS N.S8.221-1987 Electrical apparatus for explosive gas atmospheres. Type of protection ?increased safety". Testing
JUS N.A5.786-1984 Basic environmental testing procedures. Test Ub: Robustness of terminations and integral mounting de- vices. Bending
JUS M.K3.061-1977 Builders'hardware. Shiel?for door bek. Shape and dimensions
JUS N.S8.202-1987 Electrical apparatus for explosive gas atmospheres. Telecommunication devices and components for elec- mnir.s for tvoe of orotection ..increased safetv"
JUS M.K3.058-1983 Builders' hardware. Shield for door lock - 72. Shape and dimensions
JUS N.S8.244-1987 Electrical apparatus forexplosive gas atmospheres. Special reguirements for motors in type ofprotection
JUS C.B5.304-1990 Pipevvork. Doubie overlap flexible metal hoses (asbestos packing, leakproof, circular section, in prote-cted carbon steel)

European Committee for Standardization (CEN), Environmental protection tooling

EN ISO 9920:2009 Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01)
EN 16603-34:2014 Space engineering - Part 34: Environmental control and life support (ECLS)
prEN 172-1989 Personal eye-protection; filters for general and industrial use
EN 14098:2001 Space Product Assurance - Thermal Cycling Test for the Screening of Space Materials and Processes
EN 13470:2001 Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation

ABS - American Bureau of Shipping, Environmental protection tooling

ABS 167 NOTICE 5-2014 THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS@ FLOATING INSTALLATIONS@ AND LIFTBOATS
ABS 167 NOTICE 3-2011 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS@ FLOATING INSTALLATIONS@ AND LIFTBOATS
ABS 167 NOTICE 2-2011 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS@ FLOATING INSTALLATIONS@ AND LIFTBOATS
ABS 167 CORR-2016 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS@ FLOATING INSTALLATIONS@ AND LIFTBOATS
ABS 167-2010 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS@ FLOATING INSTALLATIONS@ AND LIFTBOATS

PL-PKN, Environmental protection tooling

PN Z02010-10-1986 Individual respiratory protective e?uipment used in air environment Methods of testing Determination of the protection time for acting absorbers against benzene
PN Z02010-17-1987 Individual respiratory protective e?uipment used in air erwironment Methods of testing Determination of the protection time for acting absorbers against ammonia
PN Z02010-09-1985 Individual respiratory protective e?uipment used in air environment Methods of testing Determination of the protection time for acting absorbers against toluene
PN Z02012-03-1988 Individual respiratory protective e?uipment used in air environment Self-contained openbreathing apparatus Re?uirements and tests
PN G09006-1972 Mine maps Conventional sings representing the dangers and protec?ion installations in underground workings
PN Z02010-11-1986 Individual respiratory protective equipment used in air environment Methods of testing Determination of the protection time for acting absorbers against sulfur dioxide
PN Z04151-02-1986 Air purity protection Tests for cyclohexane Determination of cyclohexane in work places by gas chromatography with sample enrichment
PN P84669-1988 Work and protecting clothing Packing, storing and transport Common re?uirements
PN BN 5904-01-1963
PN E05022-1957
PN Z04180-02-1987 Air purity protection ests for l,3-dioxolane d l,3,5-trioxaneDetermination of l,3-dioxolane nd l,3,5-trioxane in work laces by gas chromatography ith sample enrichment

Liaoning Provincial Standard of the People's Republic of China, Environmental protection tooling

DB21/T 1844-2022 Technical specification for external thermal insulation engineering of thermal insulation decorative panels
DB21/T 1844-2010 Technical specification for external thermal insulation engineering of thermal insulation and decorative composite panels
DB21/T 3361-2021 Technical regulations for interior decoration maintenance and repair engineering
DB21/T 1845-2010 XPS thermal insulation decorative composite panel exterior wall external thermal insulation engineering technical regulations

Beijing Provincial Standard of the People's Republic of China, Environmental protection tooling

DB11/T 697-2019 Technical specification for construction of thermal insulation decorative board external wall external thermal insulation
DB11/T 697-2009 Technical specification for construction of external thermal insulation of external walls (practice of decorative panels for external thermal insulation of external walls)

Professional Standard - Chemical Industry, Environmental protection tooling

HG 20667-2005 Provisions on engineering design of environmental protection of chemical industry projects
HG 20667-2005(条文说明) Provisions on engineering design of environmental protection of chemical industry projects (explanation)
HG/T 21572-1995（编制说明） Stirring drive mechanical seal cycle protection system
HG/T 21572-1995 Stirring drive mechanical seal cycle protection system
HG 20501-1992（条文说明） Regulations on Design of Environmental Protection Monitoring Stations of Chemical Enterprises
HG 20501-1992 Regulations on Design of Environmental Protection Monitoring Stations of Chemical Enterprises
HG/T 22806-1994 Environmental Protection Design Regulations for Chemical Mine Construction Projects
HG/T 20501-2013 Code for design of environmental protection monitoring station in chemical industry projects

CZ-CSN, Environmental protection tooling

CSN 03 8212-1994 Quality assurance of the corrosion tests in artificial atmospheres
CSN 27 5004-1984 Mobile work platforms. Assembly, operatíon, testing and maintenance
CSN 34 5791 Cast.2-30-1989 Ekkctrotechnical and electronic products.Basic environmental Jesting procedures.Part 2-30 Test Db and guidance:Damp heat, cyclic (12 + 12-hour eyele)
CSN 30 0421-1992 Agricultural and forestry tractors. Testing methods of protective are. Safety of work

Professional Standard - Urban Construction, Environmental protection tooling

GB 5042-1985 Design standard for environmental protection facilities of textile industry
GB 50425-2019 Design standard for environmental protection facilities of textile industry
GB 51364-2019 Design standards for environmental protection facilities of shipbuilding industry engineering projects

Professional Standard - Post and Telecommunication, Environmental protection tooling

YD 5039-1997 Specifications on Environment Protection for Engineering Construction of Telecommunications
YD 5039-2009 Provisional Specifications on Enironment Protection for Engineering Construction of Telecommunications
YD 5205-2014 Provisional Supervision Specifications on Energy Saving and Environment Protection for Telecommunication Construction Engineering

ES-AENOR, Environmental protection tooling

UNE 26-301-1986

Standard Association of Australia （SAA）, Environmental protection tooling

AS/NZS 4815:2006 Office-based health care facilities - Reprocessing of reusable medical and surgical instruments and equipment, and maintenance of the associated environment
IEC 60079-18:2014 RLV Explosive atmospheres — Part 18: Equipment protection by encapsulation “m”
AS/NZS 60079.18:2016 Explosive atmospheres, Part 18: Equipment protection by encapsulation "m"
AS 2252.6:2011
AS 2252.2:1994 Biological safety cabinets - Laminar flow biological safety cabinets (Class II) for personnel, environment and product protection

GOSTR, Environmental protection tooling

GOST R 58533-2019 Environmental management. Guide for assessment of environmental protection measures industrial enterprises costs
GOST R 58942-2020 System of ensuring geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

RU-GOST R, Environmental protection tooling

GOST 21.402-1983 System of building design documents. Anticorrosive protection of technological apparatus, gas pipes and pipelines. Working drawings
GOST R 53742-2009 Resources saving. Packaging. Requirements for packaging recoverable by material recycling
GOST 29130-1991 Protective decorative coating accessories for products of light industry. General requirements
GOST IEC 60079-31-2013 Explosive atmospheres. Part 31. Equipment dust ignition protection by enclosure ?t?
GOST 31.211.42-1983 System of technological arrangement standards. Elements and assembly junction of built up fixtures for assembly and velding. Technical requirements. Acceptance rales. Methods of control. Marking, packing, transportation and storage
GOST 23216-1978 Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

国家文物局, Environmental protection tooling

WW/T 0096-2020 Environmental control, purification and humidity control device for the preservation of cultural relics in the museum
WW/T 0099-2020 Test method for environmental adaptability of preventive protection equipment for cultural relics in collections

Professional Standard - Construction Industry, Environmental protection tooling

JGJ/T 427-2018 Technical standards for protection of finished products of architectural decoration and renovation projects

American Bureau of Shipping , Environmental protection tooling

ABS 167 CORR-2012 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS, FLOATING INSTALLATIONS, AND LIFTBOATS
ABS 167 NOTICE 4-2013 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS, FLOATING INSTALLATIONS, AND LIFTBOATS
ABS 5167 NOTICE 5-2014 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS, FLOATING INSTALLATIONS, AND LIFTBOATS
ABS 167 NOTICE 1-2011 GUIDE FOR THE ENVIRONMENTAL PROTECTION NOTATION FOR OFFSHORE UNITS, FLOATING INSTALLATIONS, AND LIFTBOATS

API - American Petroleum Institute, Environmental protection tooling

API PUBL 312-1990 Responding to Environmental Challenge A Discussion Among People from Industry@ Government and Environmental Groups
API RP 50-1995 Natural Gas Processing Plant Practices for Protection of the Environment (Second Edition)
API PUBL 31101-1993 Environmental Design Considerations for Petroleum Refining Crude Processing Units
API PUBL 311-1993 Environmental Design Considerations for Petroleum Refining Crude Processing Units

Shanxi Provincial Standard of the People's Republic of China, Environmental protection tooling

DB14/T 2367-2021 Meteorological equipment emergency support work procedures
DB14/T 1327-2016 Technical Guidelines for Epoxy Asphalt Concrete Bridge Deck Pavement Construction

Hebei Provincial Standard of the People's Republic of China, Environmental protection tooling

DB13/T 5183-2020 Technical specifications for environmental protection acceptance of constructed wetland water purification projects
DB13/T 5743-2023 Environmental Protection Technical Specifications for Transfer Points of Port Coal Loading and Unloading Systems
DB13/ 68-1991 Technical conditions for safety, environmental protection and thermal performance of bituminous coal honeycomb coal boiling water boilers

Hubei Provincial Standard of the People's Republic of China, Environmental protection tooling

DB42/T 1107-2015 Engineering technical specification for external thermal insulation system of thermal insulation decorative board exterior wall

Jilin Provincial Standard of the People's Republic of China, Environmental protection tooling

DB22/T 5022-2019 Technical standard for external wall insulation engineering of metal decorative insulation board

未注明发布机构, Environmental protection tooling

GJB 282.4-1995 Environmental conditions for armored vehicles Operating and storage ambient humidity
BS EN 60079-18:2015+A1:2017(2018) Explosive atmospheres Part 18 : Equipment protection by encapsulation "m"
GJB 9157-2017 Requirements for preparation of equipment environmental engineering documents

International Electrotechnical Commission (IEC), Environmental protection tooling

IEC 60079-18:2014+AMD1:2017 CSV Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2014/AMD1:2017 Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2014/COR1:2018 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"; Corrigendum 1
IEC 61747-40-4:2015 Liquid crystal display devices - Part 40-4: Mechanical testing of display cover glass for mobile devices - Biaxial flexural strength (Ring-on-ring)

Danish Standards Foundation, Environmental protection tooling

DS/EN 60079-18:2010 Explosive atmospheres - Part 18: Equipment protection by encapsulation ""m""
DS/EN 15811/AC:2010 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool
DS/EN 15811:2009 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool
DS/EN 14098:2002 Space product assurance - Thermal cycling test for the screening of space materials and processes
DS/EN IEC 63052:2021 Power frequency overvoltage protective devices (POPs) for household and similar applications
DS/EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP)
DS/EN 50550/AC:2012 Power frequency overvoltage protective device for household and similar applications (POP)
DS/EN 300019-2-4 V2.2.2:2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment;Part 2-4: Specification of environmental tests;Stationary use at non-weatherprotected locations
DS/EN prEN 300019-1-5 V2.:2004 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
DS/EN 300019-2-5 V3.0.0:2004 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
DS/ISO/TS 16976-8:2013 Respiratory protective devices - Human factors - Part 8: Ergonomic factors

AENOR, Environmental protection tooling

UNE-EN 60079-18:2010 Explosive atmospheres -- Part 18: Equipment protection by encapsulation "m"
UNE-EN 50550:2012 Power frequency overvoltage protective device for household and similar applications (POP)
UNE-EN 50550:2012/A1:2015 Power frequency overvoltage protective device for household and similar applications (POP)

CENELEC - European Committee for Electrotechnical Standardization, Environmental protection tooling

EN 60079-18:2009 "Explosive atmospheres - Part 18: Equipment protection by encapsulation ""m"""

American National Standards Institute （ANSI), Environmental protection tooling

ANSI/ISEA 201-2012 Classification of Insulating Apparel Used in Cold Work Environments
ANSI/ASSE 1057-2012 Performance Requirements for Freeze Resistant Sanitary Yard Hydrants with Backflow Protection

Professional Standard - Aerospace, Environmental protection tooling

QJ 1315-1987 General process for epoxy nitro enamel coating
QJ/Z 131.19-1984 Machine Tool Fixture Parts Process Card Atlas Transfer Faceplate Worker with Safety Device
QJ/Z 131.16-1984 Machine tool fixture parts process card Atlas lathe face plate safety device process card

工业和信息化部/国家能源局, Environmental protection tooling

JB/T 13305-2017 Organic working substance Rankine cycle power generation device

Jiangxi Provincial Standard of the People's Republic of China, Environmental protection tooling

DB36/T 1290-2020 Guidelines for Environmental Protection Acceptance of Completion of Highway Construction Projects

Professional Standard - Non-ferrous Metal, Environmental protection tooling

YS 5017-2004 Technical specification for environmental protection design of non-ferrous metal industry

American Petroleum Institute (API), Environmental protection tooling

API RP 50-1995(2013) Natural Gas Processing Plant Practices for Protection of the Environment

Professional Standard - Textile, Environmental protection tooling

FJJ 108-1989 Technical Regulations on Environmental Protection Design of Textile Industry Enterprises

US-Unspecified Preparing Activity, Environmental protection tooling

DI-QCIC-81870-2012 Alteration Installation Team Quality Assurance Workbook

KR-KS, Environmental protection tooling

KS C IEC 61229-2017 Rigid protective covers for live working on a.c. installations

NO-SN, Environmental protection tooling

NS 3420-A-2005 Specification texts for building,construction and installations Part A:Insurances,provision of security and preliminary work

ISA - International Society of Automation, Environmental protection tooling

ISA 60079-18-2012 "Explosive atmospheres - Part 18: Equipment protection by encapsulation ""m"" (12.23.01)"

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Environmental protection tooling

CEPT T/TR 02-09 E-1986 Classification of Environmental Conditions for Stationary Telecommunications Installations at Weather-Protected Locations Environmental Classes 3.1-3.5

Professional Standard - Petroleum, Environmental protection tooling

SY/T 10047-2003 Specifications for environmental protection design of offshore oil/gas field development

AASHTO - American Association of State Highway and Transportation Officials, Environmental protection tooling

LAG-1-2012 LEANER AND GREENER SUSTAINABILITY AT WORK IN TRANSPORTATION

Henan Provincial Standard of the People's Republic of China, Environmental protection tooling

DB41/T 2076-2020 Construction technical specification for energy-saving and environment-friendly modified asphalt pavement
DB41/T 2261-2022 Paint coating process of vertical circulation mechanical parking equipment

Guizhou Provincial Standard of the People's Republic of China, Environmental protection tooling

DB52/T 1183-2017 Design guidelines for environmental protection of wind farm projects in mountainous areas of Guizhou

Gansu Provincial Standard of the People's Republic of China, Environmental protection tooling

DB62/T 2309-2018 Basic norms of environmental protection standardization construction of industrial enterprises
DB62/T 2309-2013 Basic norms of environmental protection standardization management for industrial enterprises

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Environmental protection tooling

HDBK CIJ-1994 Construction@ Installation@ Jointing and Protection of Optical Fibres Cables

Professional Standard - Aviation, Environmental protection tooling

HB 7262.7-1995 Conformal Coating of Printed Board Assembly for Aeronautical Products Denso Process
HB/Z 223.7-2003 Aircraft Assembling Technology Part 7: Riveting for Swaged Collar Type Rivet
HB/Z 100-1985 Design and manufacture of epoxy plastic process equipment Sheet metal

CN-QIYE, Environmental protection tooling

Q/GDW 267-2009 Relay protection and power grid safety automatic device on-site work security regulations
Q/GDW 11357-2014 Smart substation relay protection and power grid security automatic device work security regulations

Inner Mongolia Provincial Standard of the People's Republic of China, Environmental protection tooling

DB15/T 1817-2020 Management guidelines for safety, environmental protection and economical operation of in-use industrial boilers

SE-SIS, Environmental protection tooling

SIS SS 1877-1980 Assembly tools for screws and nuts - Lock rings for interna! hexagon
SIS SS-ISO 9001:1987 Quality systems - Model for quality assurance in design/development, production, installation and servicing
SIS SS-EN 29 001-1988 Quality systems — Model for quality assurance in design/development, production, installation andservicing

HU-MSZT, Environmental protection tooling

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Environmental protection tooling

GJB 156A-2008 Design and installation of sacrificial anode system for engineering structures in harbour

ES-UNE, Environmental protection tooling

UNE-EN 60079-18:2016 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
UNE-EN 60079-18:2016/A1:2018 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
UNE-EN 60079-18:2016/AC:2018-09 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
UNE-EN 50550:2012/AC:2012 Power frequency overvoltage protective device for household and similar applications (POP)
UNE-EN IEC 63052:2022 Power frequency overvoltage protective devices (POPs) for household and similar applications
UNE-EN 300019-2-5 V2.1.2:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations (Endorsed by AENOR in September of 2003.)
UNE-EN 300019-2-5 V3.0.0:2003 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations (Endorsed by AENOR in September of 2003.)

BE-NBN, Environmental protection tooling

NBN S 01-015-1979 Acoustics - Assessment of occupational noise exposure for hearing conservation purposes

Professional Standard - Nuclear Industry, Environmental protection tooling

EJ/T 20094-2014 Technical requirements for environmental protection in uranium mining and metallurgy project for check and accept of completed project
EJ/T 869-1994 Requirements for compiling quality assurance program of construction and installation enterprises in nuclear industry

Shanghai Provincial Standard of the People's Republic of China, Environmental protection tooling

DB31/T 1057-2017 Basic requirements for safety, energy saving and environmental protection management of in-use industrial boilers

国家市场监督管理总局、中国国家标准化管理委员会, Environmental protection tooling

GB/T 8423.6-2020 Petroleum and natural gas industries terminology—Part 6:Safety and environmental protection and energy conservation

BELST, Environmental protection tooling

STB 1970-2009 Construction. Installation easy protecting constructions. Control quality of works

International Telecommunication Union (ITU), Environmental protection tooling

ITU-T L.1 FRENCH-1988 Construction Installation and Protection of Telecommunication Cables in Public Networks
ITU-T L.1 SPANISH-1988 Construction Installation and Protection of Telecommunication Cables in Public Networks

Professional Standard-Ships, Environmental protection tooling

CB/T 4512-2020 Overspeed protection device for platform lifting system for marine engineering

VDI - Verein Deutscher Ingenieure, Environmental protection tooling

VDI/VDE 2180 Blatt 4-1968 Sicherung von Anlagen der Verfahrenstechnik; Pruefung von Sicherungseinrichtungen

Association of German Mechanical Engineers, Environmental protection tooling

VDI/VDE 2180 Blatt 6-2013 Safeguarding of industrial process plants by means of process control engineering (PCE) - Application of functional safety in the context of explosion protection

Lithuanian Standards Office , Environmental protection tooling

LST EN 14098-2002 Space product assurance - Thermal cycling test for the screening of space materials and processes
LST EN 50550-2011 Power frequency overvoltage protective device for household and similar applications (POP)
LST EN 50550-2011/AC-2012 Power frequency overvoltage protective device for household and similar applications (POP)
LST EN 300 019-1-5 V2.1.4-2004 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
LST EN 300 019-1-5 V2.1.2-2005 Environmental Engineering (EE);Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
LST EN 300 019-2-5 V2.1.2-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
LST EN 300 019-2-5 V3.0.0-2005 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
LST EN 60079-18-2010 Explosive atmospheres -- Part 18: Equipment protection by encapsulation "m" (IEC 60079-18:2009 + corrigendum 2009)
LST ETSI EN 300 019-2-5 V3.1.1-2021 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2: Specification of environmental tests; Sub-part 5: Ground vehicle installations
LST EN IEC 63052:2021 Power frequency overvoltage protective devices (POPs) for household and similar applications (IEC 63052:2019)

Heilongjiang Provincial Standard of the People's Republic of China, Environmental protection tooling

DB23/T 3481-2023 Environmentally friendly and stable rubber powder modified asphalt and mixture construction technical regulations

European Committee for Electrotechnical Standardization（CENELEC）, Environmental protection tooling

EN 60079-18:2015 Explosive atmospheres �C Part 18: Equipment protection by encapsulation ��m�� (Incorporates Amendment A1: 2017)

European Telecommunications Standards Institute (ETSI), Environmental protection tooling

ETSI EN 300 019-1-5-2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations V2.1.2
ETSI EN 300 019-2-4-2015 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations (V2.4.1)
ETSI EN 300019-2-5 V 3.1.1:2021 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2: Specification of environmental tests - Sub-part 5: Ground vehicle installations
ETSI EN 300 019-2-3-1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations V2.1.2
ETSI EN 300 019-2-3-2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests; Stationary Use at Weatherprotected Locations V2.2.2
ETSI EN 300 019-2-4-2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations V2.2.2
ETSI EN 300 019-2-4-1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations V2.1.2
ETSI ES 203 408-2016 Environmental Engineering (EE); Colour and marking of DC cable and connecting devices (V1.1.1)

ETSI - European Telecommunications Standards Institute, Environmental protection tooling

ETSI EN 300 019-2-4:2018 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations (V2.4.6)
ETSI EN 300 019-2-4:2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations (V2.2.2)
ETSI EN 300 019-1-4:2002 Environmental Engineering (EE); Environmental conditions and evironmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations (V2.1.1)
ETSI EN 300 019-2-4:2015 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations (V2.4.1)
ETSI EN 300 019-2-4:2013 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations (V2.3.1)
ETSI EN 300 019-1-4:2003 Environmental Engineering (EE); Environmental conditions and evironmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations (V2.1.1)
ETSI EN 300 019-1-4:2013 Environmental Engineering (EE); Environmental conditions and evironmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations (V2.1.8)
ETSI EN 300 019-2-4:2012 Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations (V2.3.1)
ETSI EN 300 019-1-5:2003 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations (V2.1.4)
ETSI EN 300 019-1-5:2002 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations (V2.1.2)
ETSI EN 300 019-2-5:2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-5: Specification of Environmental Tests; Ground Vehicle Installations (V2.1.2)
ETSI EN 300 019-1-5:2001 Environmental Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-5: Classification of Environmental Conditions; Ground Vehicle Installations (V2.1.0)

CU-NC, Environmental protection tooling

NC 93-28-1988 Standards System for Environment Protection. Community Hygiene. Accomodation Installations. Hygienic Sanitary Requirements
NC 12-04-42-1987 Standards Syetem for Protection Against Corrosion. Electrotechnical Devices. Accelerated Test for Cyclic Humid Heat

SSPC - The Society for Protective Coatings, Environmental protection tooling

PS 15.03-1985 Chlorinated Rubber Painting System for Marine and Industrial Atmospheres

Jiangsu Provincial Standard of the People's Republic of China, Environmental protection tooling

DB32/T 4172-2021 Regulations for acceptance of environmental quality of civil building interior decoration engineering

AT-ON, Environmental protection tooling

ONORM B 2260-1-1998 Cryoprotection and thermal insulation works for technical installations in enterprises and domestics - Works contract

American Water Works Association (AWWA), Environmental protection tooling

AWWA C116/A21.16-2003 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service

Institute of Electrical and Electronics Engineers (IEEE), Environmental protection tooling

NFPA (Fire) 2112 Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2018 Edition

US-CFR-file, Environmental protection tooling

CFR 10-51.53-2013 Energy.Part51:Environmental protection regulations for domestic licensing and related regulatory functions. Section51.53:Postconstruction environmental reports.

Defense Logistics Agency, Environmental protection tooling

DLA A-A-55519/3 C-2012 FUSE, INCLOSED LINK, SUBMINIATURE, SURFACE MOUNT (SM) VERY FAST ACTING, WITH WRAP AROUND TERMINALS

ZA-SANS, Environmental protection tooling

SANS 10213:1997 The installation and safe use of ethylene oxide (EO) sterilizers in health-care facilities and in industry

Taiwan Provincial Standard of the People's Republic of China, Environmental protection tooling

CNS 5547-1988 1
CNS 6118-1988 1